Effect of silanization on chitosan porous scaffolds for peripheral nerve regeneration

Surface Modification of Nerve Guide Conduits with ECM Coatings and Investigating Their Impact on Schwann Cell Response

In this study, layer-by-layer coatings composed of heparin and collagen are proposed as an extracellular mimetic environment on nerve guide conduits (NGC) to modulate the behavior of Schwann cells (hSCs). The authors evaluated the stability, degradation over time, and bioactivity of six bilayers of heparin/collagen layer-by-layer coatings, denoted as (HEP/COL)6. The stability study reveals that (HEP/COL)6 is stable after incubating the coatings in cell media for up to 21 days. The impact of (HEP/COL)6 on hSCs viability, protein expression, and migration is evaluated. These assays show that hSCs cultured in (HEP/COL)6 have enhanced protein expression and migration. This condition increases the expression of neurotrophic and immunomodulatory factors up to 1.5-fold compared to controls, and hSCs migrated 1.34 times faster than in the uncoated surfaces. Finally, (HEP/COL)6 is also applied to a commercial collagen-based NGC, NeuraGen, and hSC viability and adhesion are studied after 6 days of culture. The morphology of NeuraGen is not altered by the presence of (HEP/COL)6 and a nearly 170% increase of the cell viability is observed in the condition where NeuraGen is used with (HEP/COL)6. Additionally, cell adhesion on the coated samples is successfully demonstrated. This work demonstrates the reparative enhancing potential of extracellular mimetic coatings.

Aminosilane Functionalized Aligned Fiber PCL Scaffolds for Peripheral Nerve Repair

Silane modification is a simple and cost-effective tool to modify existing biomaterials for tissue engineering applications. Aminosilane layer deposition has previously been shown to control NG108-15 neuronal cell and primary Schwann cell adhesion and differentiation by controlling deposition of ─NH2 groups at the submicron scale across the entirety of a surface by varying silane chain length. This is the first study toreport depositing 11-aminoundecyltriethoxysilane (CL11) onto aligned Polycaprolactone (PCL) scaffolds for peripheral nerve regeneration. Fibers are manufactured via electrospinning and characterized using water contact angle measurements, atomic force microscopy (AFM), and X-ray photoelectron spectroscopy (XPS). Confirmed modified fibers are investigated using in vitro cell culture of NG108-15 neuronal cells and primary Schwann cells to determine cell viability, cell differentiation, and phenotype. CL11-modified fibers significantly support NG108-15 neuronal cell and Schwann cell viability. NG108-15 neuronal cell differentiation maintains Schwann cell phenotype compared to unmodified PCL fiber scaffolds. 3D ex vivo culture of Dorsal root ganglion explants (DRGs) confirms further Schwann cell migration and longer neurite outgrowth from DRG explants cultured on CL11 fiber scaffolds compared to unmodified scaffolds. Thus, a reproducible and cost-effective tool is reported to modify biomaterials with functional amine groups that can significantly improve nerve guidance devices and enhance nerve regeneration.

The Impact of Polyethylene Glycol-Modified Chitosan Scaffolds on the Proliferation and Differentiation of Osteoblasts

The objective of this study was to investigate the influence of polyethylene glycol (PEG) incorporated chitosan scaffolds on osteoblasts proliferation and differentiation. The chitosan polymer was initially modified by the predetermined concentration of the photoreactive azido group for UV-crosslinking and with RGD peptides (N-acetyl-GRGDSPGYG-amide). The PEG was mixed at different ratios (0, 10, and 20 wt%) with modified chitosan in 96-well tissue culture polystyrene plates to prepare CHI-100, CHI-90, and CHI-80 scaffolds. PEG-containing scaffolds exhibited bigger pore size and higher water content compared to unmodified chitosan scaffolds. After 10 days of incubation, the cell number of CHI-90 (1.1 × 106 cells/scaffold) surpasses that of CHI-100 (9.2 × 105 cells/scaffold) and the cell number of CHI-80 (7.6 × 105 cells/scaffold) were significantly lower. The ALP activity of CHI-90 was the highest on the fifth day indicating the favored osteoblasts' early-stage differentiation. Moreover, after 14 days of osteogenic culture, calcium deposition in the CHI-90 scaffolds (2.7 μmol Ca/scaffold) was significantly higher than the control (2.2 μmol Ca/scaffold) whereas on CHI-80 was 1.9 μmol/scaffold. The results demonstrate that PEG-incorporated chitosan scaffolds favored osteoblasts proliferation and differentiation; however, mixing relatively excess PEG (≥20% wt.) had a negative impact on osteoblasts proliferation and differentiation.

Loofah-chitosan and poly (-3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) based hydrogel scaffolds for meniscus tissue engineering applications

The meniscus is a fibrocartilaginous tissue that is very important for the stability of the knee joint. However, it has a low ability to heal itself, so damage to it will always lead to articular cartilage degeneration. The goal of this study was to make a new type of meniscus scaffold made of chitosan, loofah mat, and PHBV nanofibers, as well as to describe hydrogel composite scaffolds in terms of their shape, chemical composition, mechanical properties, and temperature. Three different concentrations of genipin (0.1, 0.3, and 0.5 %) were used and the optimal crosslinker concentration was 0.3 % for Chitosan/loofah (CL) and Chitosan/loofah/PHBV fiber (CLF). Scaffolds were seeded using undifferentiated MSCs and incubated for 21 days to investigate the chondrogenic potential of hydrogel scaffolds. Cell proliferation analyses were performed using WST-1 assay, GAG content was analyzed, SEM and fluorescence imaging observed morphologies and cell attachment, and histological and immunohistochemical studies were performed. The in vitro analysis showed no cytotoxic effect and enabled cells to attach, proliferate, and migrate inside the scaffold. In conclusion, the hydrogel composite scaffold is a promising material for engineering meniscus tissue.

Cenospheres-Reinforced PA-12 Composite: Preparation, Physicochemical Properties, and Soaking Tests

The main aim of this research was the preparation of a polymer–ceramic composite with PA-12 as the polymer matrix and modified aluminosilicate cenospheres (CSs) as the ceramic filler. The CSs were subjected to an early purification and cleaning process, which was also taken as a second objective. The CSs were surface modified by a two-step process: (1) etching in Piranha solution and (2) silanization in 3-aminopropyltriethoxysilane. The composite was made for 3D printing by FDM. Raw and modified CSs and a composite with PA-12 were subjected to the following tests: surface development including pores (BET), real density (HP), chemical composition and morphology (SEM/EDS, FTIR), grain analysis (PSD), phase composition (XRD), hardness (HV), and static tensile tests. The composites were subjected to soaking under simulated body fluid (SBF) conditions in artificial saliva for 14, 21, and 29 days. Compared to pure PA-12, PA-12_CS had generally better mechanical properties and was more resistant to SBF at elevated temperatures and soaking times. These results showed this material has potential for use in biomedical applications. These results also showed the necessity of developing a kinetic aging model for aging in different liquids to verify the true value of this material.

Effect of Calcination Temperature on the Phase Composition, Morphology, and Thermal Properties of ZrO2 and Al2O3 Modified with APTES (3-aminopropyltriethoxysilane)

This paper describes the effect of calcination temperature on the phase composition, chemical composition, and morphology of ZrO₂ and Al₂O₃ powders modified with 3-aminopropyltriethoxysilane (APTES). Both ceramic powders were modified by etching in piranha solution, neutralization in ammonia water, reaction with APTES, ultrasonication, and finally calcination at 250, 350, or 450 °C. The obtained modified powders were characterized using X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, particle size distribution (PSD), scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM/EDS), and thermogravimetric analysis (TGA).

Passive Control of Silane Diffusion for Gradient Application of Surface Properties

Liquid lithography represents a robust technique for fabricating three-dimensional (3D) microstructures on a two-dimensional template. Silanization of a surface is often a key step in the liquid lithography process and is used to alter the surface energy of the substrate and, consequently, the shape of the 3D microfeatures produced. In this work, we present a passive technique that allows for the generation of silane gradients along the length of a substrate. The technique relies on a secondary diffusion chamber with a single opening, leading to a directional introduction of silane to the substrate via passive diffusion. The secondary chamber geometry influences the deposited gradient, which is shown to be well captured by Monte Carlo simulations that incorporate the passive diffusion and grafting processes. The technique ultimately allows the user to generate a range of substrate wettabilities on a single chip, enhancing throughput for organ-on-a-chip applications by mimicking the spatial variability of tissue topographies present in vivo.

Bionic microenvironment-inspired synergistic effect of anisotropic micro-nanocomposite topology and biology cues on peripheral nerve regeneration

Anisotropic topographies and biological cues can simulate the regenerative microenvironment of nerve from physical and biological aspects, which show promising application in nerve regeneration. However, their synergetic influence on injured peripheral nerve is rarely reported. In the present study, we constructed a bionic microenvironment-inspired scaffold integrated with both anisotropic micro-nanocomposite topographies and IKVAV peptide. The results showed that both the topographies and peptide displayed good stability. The scaffolds could effectively induce the orientation growth of Schwann cells and up-regulate the genes and proteins relevant to myelination. Last, three signal pathways including the Wnt/β-catenin pathway, the extracellular signal-regulated kinase/mitogen-activated protein pathway, and the transforming growth factor-β pathway were put forward, revealing the main path of synergistic effects of anisotropic micro-nanocomposite topographies and biological cues on neuroregeneration. The present study may supply an important strategy for developing functional of artificial nerve implants.

Cost effective optimised synthetic surface modification strategies for enhanced control of neuronal cell differentiation and supporting neuronal and Schwann cell viability

Enriching a biomaterial surface with specific chemical groups has previously been considered for producing surfaces that influence cell response. Silane layer deposition has previously been shown to control mesenchymal stem cell adhesion and differentiation. However, it has not been used to investigate neuronal or Schwann cell responses in vitro to date. We report on the deposition of aminosilane groups for peripheral neurons and Schwann cells studying two chain lengths: (a) 3-aminopropyl triethoxysilane (short chain-SC) and (b) 11-aminoundecyltriethoxysilane (long chain-LC) by coating glass substrates. Surfaces were characterised by water contact angle, AFM and XPS. LC-NH₂ was produced reproducibly as a homogenous surface with controlled nanotopography. Primary neuron and NG108-15 neuronal cell differentiation and primary Schwann cell responses were investigated in vitro by S100β, p75, and GFAP antigen expression. Both amine silane surface supported neuronal and Schwann cell growth; however, neuronal differentiation was greater on LC aminosilanes versus SC. Thus, we report that silane surfaces with an optimal chain length may have potential in peripheral nerve repair for the modification and improvement of nerve guidance devices.

Construction of Biofunctionalized Anisotropic Hydrogel Micropatterns and Their Effect on Schwann Cell Behavior in Peripheral Nerve Regeneration

Hydrogels have promising application in tissue regeneration due to their excellent physicochemical and biocompatible properties, whereas anisotropic micropatterns are been proven to directionally induce cell alignment and accelerate cell migration. However, an effect of biofunctionalized anisotropic hydrogel micropatterns on nerve regeneration has rarely been reported. In this study, the anisotropic polyacrylamide (PAM) hydrogel micropatterns with aligned ridge/groove structures were first prepared via in situ free radical polymerization and micromolding, and then biofunctionalized using YIGSR peptide for better promoting cell growth. The morphology, swelling ratio, wettability, mechanical properties, and stability of the prepared hydrogel were characterized. The successful immobilization of YIGSR peptide on the PAM hydrogel was monitored using FTIR, immunofluorescence staining, and ELISA. The effects on adhesion, directional growth, and biological function of Schwann cells were evaluated. The results displayed that the anisotropic PAM hydrogel micropatterns with inner porous structure possessed good stability, swelling, and mechanical properties. The YIGSR peptide could be well immobilized on hydrogel micropatterns with a percentage of 62.6%. The biofunctionalized anisotropic hydrogel micropatterns could effectively regulate the orientation growth of Schwann cells, and obviously up-regulate BDNF (40%) and β-actin (50%) expression compared with single hydrogel micropatterns, without negatively affecting the normal secretion of neurotropic factors by Schwann cells. To the best of our knowledge, this is the first time to study the construction and effect of biofunctionalized anisotropic hydrogel micropatterns on nerve regeneration, which may provide an experimental and theoretical basis for the design and development of artificial implants for nerve regeneration application.

[Research progress of graphene and its derivatives in repair of peripheral nerve defect]

Objective

To review the research progress of graphene and its derivatives in repair of peripheral nerve defect.

Methods

The related literature of graphene and its derivatives in repair of peripheral nerve defect in recent years was extensively reviewed.

Results

It is confirmed by in vitro and in vivo experiments that graphene and its derivatives can promote cell adhesion, proliferation, differentiation and neurite growth effectively. They have good electrical conductivity, excellent mechanical properties, larger specific surface area, and other advantages when compared with traditional materials. The three-dimensional scaffold can improve the effect of nerve repair.

Conclusion

The metabolic pathways and long-term reaction of graphene and its derivatives in the body are unclear. How to regulate their biodegradation and explain the electric coupling reaction mechanism between cells and materials also need to be further explored.

Advances in Controlling Differentiation of Adult Stem Cells for Peripheral Nerve Regeneration

Adult stems cells, possessing the ability to grow, migrate, proliferate, and transdifferentiate into various specific phenotypes, constitute a great asset for peripheral nerve regeneration. Adult stem cells' ability to undergo transdifferentiation is sensitive to various cell-to-cell interactions and external stimuli involving interactions with physical, mechanical, and chemical cues within their microenvironment. Various studies have employed different techniques for transdifferentiating adult stem cells from distinct sources into specific lineages (e.g., glial cells and neurons). These techniques include chemical and/or electrical induction as well as cell-to-cell interactions via co-culture along with the use of various 3D conduit/scaffold designs. Such scaffolds consist of unique materials that possess controllable physical/mechanical properties mimicking cells' natural extracellular matrix. However, current limitations regarding non-scalable transdifferentiation protocols, fate commitment of transdifferentiated stem cells, and conduit/scaffold design have required new strategies for effective stem cells transdifferentiation and implantation. In this progress report, a comprehensive review of recent advances in the transdifferentiation of adult stem cells via different approaches along with multifunctional conduit/scaffolds designs is presented for peripheral nerve regeneration. Potential cellular mechanisms and signaling pathways associated with differentiation are also included. The discussion with current challenges in the field and an outlook toward future research directions is concluded.

Polymeric scaffolds for three-dimensional culture of nerve cells: a model of peripheral nerve regeneration

Understanding peripheral nerve repair requires the evaluation of 3D structures that serve as platforms for 3D cell culture. Multiple platforms for 3D cell culture have been developed, mimicking peripheral nerve growth and function, in order to study tissue repair or diseases. To recreate an appropriate 3D environment for peripheral nerve cells, key factors are to be considered including: selection of cells, polymeric biomaterials to be used, and fabrication techniques to shape and form the 3D scaffolds for cellular culture. This review focuses on polymeric 3D platforms used for the development of 3D peripheral nerve cell cultures.

Nanoengineered porous chitosan/CaTiO3 hybrid scaffolds for accelerating Schwann cells growth in peripheral nerve regeneration

To further improve the property of promoting peripheral nerve regeneration of chitosan materials, CaTiO₃ nanoparticles with various concentrations were synthesized in chitosan (CS) solution and formed to porous CS/CaTiO₃ hybrid scaffolds. The properties including morphology, wettability, porosity, crystallization intensity and surface charges were characterized, respectively. The influence of the porous CS/CaTiO₃ hybrid scaffolds on Schwann cells growth was evaluated. The results showed that the CaTiO₃ hybridized CS scaffolds possessed homogeneous nanoparticles distribution with concentration-dependent effect. The hybridization of CaTiO₃ nanoparticles could increase the hydrophobicity while reduce the porosity and surface charge density of the porous CS/CaTiO₃ hybrid scaffolds The crystal structure of the hybridized scaffolds was mainly the orthorhombic structure of the calcium titanate accompanied by the amorphous phase of chitosan. Culture of Schwann cells indicated that the CS/CaTiO₃ hybrid scaffolds with a suitable concentration of CaTiO₃ nanoparticles could obviously promote the attachment, proliferation and biological function maintenance of Schwann cells, thus showing potentially great significance towards application in peripheral nerve regeneration.

Nerve growth factor loaded heparin/chitosan scaffolds for accelerating peripheral nerve regeneration

Artificial chitosan scaffolds have been widely investigated for peripheral nerve regeneration. However, the effect was not as good as that of autologous grafts and therefore could not meet the clinical requirement. In the present study, the nerve growth factor (NGF) loaded heparin/chitosan scaffolds were fabricated via electrostatic interaction for further improving nerve regeneration. The physicochemical properties including morphology, wettability and composition were measured. The heparin immobilization, NGF loading and release were quantitatively and qualitatively characterized, respectively. The effect of NGF loaded heparin/chitosan scaffolds on nerve regeneration was evaluated by Schwann cells culture for different periods. The results showed that the heparin immobilization and NGF loading did not cause the change of bulk properties of chitosan scaffolds except for morphology and wettability. The pre-immobilization of heparin in chitosan scaffolds could enhance the stability of subsequently loaded NGF. The NGF loaded heparin/chitosan scaffolds could obviously improve the attachment and proliferation of Schwann cells in vitro. More importantly, the NGF loaded heparin/chitosan scaffolds could effectively promote the morphology development of Schwann cells. The study may provide a useful experimental basis to design and develop artificial implants for peripheral nerve regeneration and other tissue regeneration.

Non-covalently crosslinked chitosan nanofibrous mats prepared by electrospinning as substrates for soft tissue regeneration

Chitosan (CS) membranes obtained by electrospinning are potentially ideal substrates for soft tissue engineering as they combine the excellent biological properties of CS with the extracellular matrix (ECM)-like structure of nanofibrous mats. However, the high amount of acid solvents required to spun CS solutions interferes with the biocompatibility of CS fibres. To overcome this limitation, novel CS based solutions were investigated in this work. Low amount of acidic acid (0.5M) was used and dibasic sodium phosphate (DSP) was introduced as ionic crosslinker to improve nanofibres water stability and to neutralize the acidic pH of electrospun membranes after fibres soaking in biological fluids. Randomly oriented and aligned nanofibres (128±19nm and 140±41nm, respectively) were obtained through electrospinning process (voltage of 30kV, 30μL/min flow rate and temperature of 39°C) showing mechanical properties similar to those of soft tissues (Young Modulus lower than 40MPa in dry condition) and water stability until 7 days. C2C12 myoblast cell line was cultured on CS fibres showing that the aligned architecture of substrate induces cell orientation that can enhance skeletal muscle regeneration.

Peripheral Nerve Regeneration: Current Status and New Strategies Using Polymeric Materials

Experiments concerning peripheral nerve regeneration have been reported since the end of the 19^th century. The need to implement an effective surgical procedure in terms of functional recovery has resulted in the appearance of several approaches to solve this problem. Nerve autograft was the first approach studied and is still considered the gold standard. Since autografts require donor harvesting, other strategies involving the use of natural materials have also been studied. Nevertheless, the results were not very encouraging and attention has moved towards the use of nerve conduits made from polymers, whose properties can be easily tailored and which allow the nerve conduit to be easily processed into a variety of shapes and forms. Some of these materials are already approved by the US Food and Drug Administration (FDA), as is presented here. Furthermore, polymers with conductive properties have very recently been subject to intensive study in this field, since it is believed that such properties have a positive influence in the regeneration of the new axons. This manuscript intends to give a global view of the mechanisms involved in peripheral nerve regeneration and the main strategies used to recover motor and sensorial function of injured nerves.

Collagen-chitosan 3-D nano-scaffolds effects on macrophage phagocytosis and pro-inflammatory cytokine release

Macrophages are effector cells in the innate and adaptive immune systems and in situ exist within three-dimensional (3-D) microenvironments. As there has been an increase in interest in the use of 3-D scaffolds to mimic natural microenvironments in vitro, this study examined the impact on cultured mice peritoneal macrophages using standard 2-D plates as compared to 3-D collagen-chitosan scaffolds. Here, 2-D and 3-D cultured macrophages were evaluated for responses to lipopolysaccharide (LPS), dexamethasone (Dex), BSA (bovine serum albumin), safranal (herbal component isolated from safranal [Saf]) and Alyssum homolocarpum mucilage (A. muc: mixed herbal components). After treatments, cultured macrophages were evaluated for viability, phagocytic activity and release of tumor necrosis factor (TNF)-α and interleukin (IL)-1β pro-inflammatory cytokines. Comparison of 2-D vs 3-D cultures showed that use of either system - with or without any exogenous agent - had no effect on cell viability. In the case of cell function, macrophages cultured on scaffolds had increases in phagocytic activity relative to that by cells on 2-D plates. In general, the test herbal components Saf and A. muc. had more impact than any of the other exogenous agents on nanoparticle uptake. With respect to production of TNFα and IL-1β, compared to the 2-D cells, scaffold cells tended to have significantly different levels of production of each cytokine, with the effect varying (higher or lower) depending on the test agent used. However, unlike with particle uptake, here, while Saf and A. muc. led to significantly greater levels of cytokine formation by the 3-D culture cells vs that by the 2-D plate cells, there was no net effect (stimulatory) vs control cultures. These results illustrated that collagen-chitosan scaffolds could provide a suitable 3-D microenvironment for macrophage phagocytosis and could also impact on the formation of pro-inflammatory cytokines.

Chitosan-Coated Collagen Membranes Promote Chondrocyte Adhesion, Growth, and Interleukin-6 Secretion

Designing scaffolds made from natural polymers may be highly attractive for tissue engineering strategies. We sought to produce and characterize chitosan-coated collagen membranes and to assess their efficacy in promoting chondrocyte adhesion, growth, and cytokine secretion. Porous collagen membranes were placed in chitosan solutions then crosslinked with glutaraldehyde vapor. Fourier transform infrared (FTIR) analyses showed elevated absorption at 1655 cm-1 of the carbon-nitrogen (N=C) bonds formed by the reaction between the (NH₂) of the chitosan and the (C=O) of the glutaraldehyde. A significant peak in the amide II region revealed a significant deacetylation of the chitosan. Scanning electron microscopy (SEM) images of the chitosan-coated membranes exhibited surface variations, with pore size ranging from 20 to 50 µm. X-ray photoelectron spectroscopy (XPS) revealed a decreased C-C groups and an increased C-N/C-O groups due to the reaction between the carbon from the collagen and the NH2 from the chitosan. Increased rigidity of these membranes was also observed when comparing the chitosan-coated and uncoated membranes at dried conditions. However, under wet conditions, the chitosan coated collagen membranes showed lower rigidity as compared to dried conditions. Of great interest, the glutaraldehyde-crosslinked chitosan-coated collagen membranes promoted chondrocyte adhesion, growth, and interleukin (IL)-6 secretion. Overall results confirm the feasibility of using designed chitosan-coated collagen membranes in future applications, such as cartilage repair.

Effects of 3-dimensional culture conditions (collagen-chitosan nano-scaffolds) on maturation of dendritic cells and their capacity to interact with T-lymphocytes

In the body, there is a natural three-dimensional (3D) microenvironment in which immune cells, including dendritic cells (DC), play their functions. This study evaluated the impact of using collagen-chitosan 3D nano-scaffolds in comparisons to routine 2D culture plates on DC phenotype and functions. Bone marrow-derived DC were cultured on scaffolds and plates and then stimulated with lipopolysaccharide (LPS) or chitosan-based nanoparticles (NP) for 24 h. Thereafter, DC viability, expression of maturation markers and levels of cytokines secretion were evaluated. In another set of studies, the DC were co-cultured with allogenic T-lymphocytes in both the 2D and 3D systems and effects on DC-induction of T-lymphocyte proliferation and cytokine release were analyzed. The results indicated that CD40, CD86 and MHC II marker expression and interleukin (IL)-12, IL-6 and tumor necrosis factor (TNF)-α secretion by DC were enhanced in 3D cultures in comparison to by cells maintained in the 2D states. The data also showed that DNA/chitosan NP activated DC more than LPS in the 3D system. T-Lymphocyte proliferation was induced to a greater extent by DNA/NP-treated DC when both cell types were maintained on the scaffolds. Interestingly, while DC induction of T-lymphocyte interferon (IFN)-γ and IL-4 release was enhanced in the 3D system (relative to controls), there was a suppression of transforming growth factor (TGF)-β production; effects on IL-10 secretion were variable. The results here suggested that collagen-chitosan scaffolds could provide a pro-inflammatory and activator environment to perform studies to analyze effects of exogenous agents on the induction of DC maturation, NP uptake and/or cytokines release, as well as for the ability of these cells to potentially interact with other immune system cells in vitro.

Regulating Schwann cells growth by chitosan micropatterning for peripheral nerve regeneration in vitro

To address the effect of chitosan micropatterning on nerve regeneration, two sizes of parallel microstripes of chitosan are fabricated on the surface of coverslips using a micromodeling method. The morphology of the prepared polydimethylsiloxane stamps and chitosan micropatterning is observed by scanning electron microscopy and the wettability of the prepared micropatterning is evaluated using water contact-angle measurements. Schwann cell (SC) culture is used to evaluate the effect of chitosan micropatterning on cell behavior. The results show that the stripe-like chitosan micropatterning can be successfully fabricated on coverslip surfaces. SCs on 30/30 μm chitosan micropatterning shows the most obvious cell orientation. Moreover, the secretion of nerve growth factor by SCs indicate that the chitosan micropatterning has no negative influence on the normal physiological function of the cells. Thus, the study suggests that chitosan micropatterning can induce and regulate the growth of SCs well, which may have potential application in peripheral nerve regeneration.