Dispersion study of nanofibrillated cellulose based poly(butylene adipate-co-terephthalate) composites

Design of Extruded Nanostructured Composites via Decoupling of the Cellulose Nanofibril/Poly(butylene adipate-co-terephthalate) Interface

The full exploitation of the outstanding mechanical properties of cellulose nanofibrils (CNFs) as potential reinforcements in nanocomposite materials is limited by the poor interactions at the CNF-polymer matrix interface. Within this work, tailor-made copolymers were designed to mediate the interface between CNFs and biodegradable poly(butylene adipate-co-terephthalate) (PBAT), and their effect on extruded nanocomposite performance was tested. For this purpose, two well-defined amphiphilic anchor-tail diblock copolymer structures were compared, with a fixed anchor block length and a large difference in the hydrophobic tail block length. The aim was to evaluate the impact of the copolymers' chain length on the nanocomposite interface. The presence of amphiphilic diblock copolymers significantly improved the mechanical properties compared to those of PBAT nanocomposites containing unmodified CNFs. In particular, the copolymer with a longer tail was more effective for CNF-PBAT dispersion interactions, leading to a 65% increase of Young's modulus of neat PBAT, while retaining high deformability (670%). The results provide insights into the effectiveness of a waterborne third component at the CNF-matrix interface and its structure-property relationship.

Reusable, Recyclable, and Biodegradable Heat-Shrinkable Melt Cross-Linked Poly(butylene adipate-co-terephthalate)/Pulp Biocomposites for Polyvinyl Chloride Replacement

Heat-shrinkable films are widely used as disposable secondary packaging but are conventionally made from fossil-based and nonbiodegradable polyvinyl chloride or polyethylene. To lower the environmental impact of such products, this work reports the development of recyclable, biodegradable, and partially biosourced heat-shrinkable biocomposites that are cost-competitive with existing shrink wraps. Poly(butylene adipate-co-terephthalate), a growing biodegradable thermoplastic, was simultaneously reinforced with pulp fibers and partially cross-linked in a single-step reactive melt processing. The designed peroxide-initiated reaction led to a 55 wt % cocontinuous insoluble gel incorporating all the pulp fibers into a cross-linked polymer network. In the solid state, the cross-linked biocomposite shows 60% elongation at break with a 200% increase in Young's modulus, while the only addition of pulp fibers stiffens and embrittles the matrix. Creep tests in the melt state indicated that the cross-linked network induces homogeneous shrinking even during the loading phase, demonstrating the potential use of the biocomposites as heat-shrinkable films. The shrinking also promotes the shape-memory of the biocomposite, which retains its dimensions after four cycles. The circularity of the materials was assessed by mechanical recycling and industrial composting, which have proven feasible end-of-life options for heat-shrinkable biocomposites.

Modified cellulose nanocrystals enhanced polycaprolactone multifunctional films with barrier, UV-blocking and antimicrobial properties for food packaging

The packaging industry demands improved eco-friendly materials with new and enhanced properties. In this context, bio-nanocomposite films with antimicrobial and UV-shielding properties based on modified cellulose nanocrystals/polycaprolactone (MCNC/PCL) were fabricated via solution casting method, and then food packaging simulation was carried out. CNCs were obtained by acid hydrolysis followed by successful functionalization with Quaternary ammonium surfactant, confirmed by FTIR, XPS, XRD, TEM, and DLS analyses. Furthermore, the morphological, physical, antibacterial, and food packaging properties of all prepared films were investigated. Results showed that the mechanical, UV blocking, barrier properties, and antibacterial activity of all composite films were remarkably improved. Particularly, the addition of 3 wt% MCNC increased the tensile strength and elongation at break by 27.5 % and 20.0 %, respectively. Moreover, the permeability of O2, CO2, and water vapor dramatically reduced by 97.6 %, 96.7 %, and 49.8% compared to the Neat PCL. Further, the UV-blocking properties of the composite films were significantly improved. The antimicrobial properties of MCNC/PCL films showed good antimicrobial properties against S. aureus. Finally, cherry packaged with 1 and 3 wt% MCNC films exhibited satisfactory freshness after 22 days of preservation. Overall, the fabricated PCL nanocomposite films can be utilized in the food packaging industry.

Xylan cinnamoylation for reinforcing poly (butylene adipate-co-terephthalate): Molecule design and interaction optimization

PBAT composites with biomass fillers have gained considerable attention as alternatives to non-biodegradable plastics. This work employed xylan derivatives as fillers for PBAT composites. Xylan was modified by introducing cinnamoyl side groups which limit the hydrogen bonding and construct π-π stacking interactions with PBAT chains. The resultant xylan cinnamates (XCi) show degree of substitution (DS) of 0.55-1.89, glass-transition temperatures (Tg) of 146.5-175.0 °C and increased hydrophobicity, which can be simply controlled by varying the molar ratio of reactants. NMR results demonstrate that the C3-OH of xylopyranosyl unit is more accessible to cinnamoylation. XCi fillers (30-50 wt%) were incorporated into PBAT through melt compounding. The filler with a DS of 0.97 exhibited the optimal reinforcing effect, showing superior tensile strength (19.4 MPa) and elongation at break (330.9 %) at a high filling content (40 wt%), which is even beyond the neat PBAT. SEM and molecular dynamics simulation suggest improved compatibility and strengthened molecular interaction between XCi and PBAT, which explains the suppressed melting/crystallization behavior, the substantial increase in Tg (-34.5 → -1.8 °C) and the superior mechanical properties of the composites. This research provides valuable insights into the preparation of high-performance composites by designing the molecular architecture of xylan and optimizing the associated interactions.

Biocomposites of Cellulose Isolated from Coffee Processing By-Products and Incorporation in Poly(Butylene Adipate-Co-Terephthalate) (PBAT) Matrix: An Overview

With its extensive production and consumption, the coffee industry generates significant amounts of lignocellulosic waste. This waste, primarily comprising coffee biomasses, is a potential source of cellulose. This cellulose can be extracted and utilized as a reinforcing agent in various biocomposites with polymer matrices, thereby creating high-value products. One such biodegradable polymer, Poly(butylene adipate-co-terephthalate) (PBAT), is notable for its properties that are comparable with low-density polyethylene, making it an excellent candidate for packaging applications. However, the wider adoption of PBAT is hindered by its relatively high cost and lower thermomechanical properties compared with conventional, non-biodegradable polymers. By reinforcing PBAT-based biocomposites with cellulose, it is possible to enhance their thermomechanical strength, as well as improve their water vapor and oxygen barrier capabilities, surpassing those of pure PBAT. Consequently, this study aims to provide a comprehensive review of the latest processing techniques for deriving cellulose from the coffee industry's lignocellulosic by-products and other coffee-related agro-industrial wastes. It also focuses on the preparation and characterization of cellulose-reinforced PBAT biocomposites.

Exploring nanocellulose frontiers: A comprehensive review of its extraction, properties, and pioneering applications in the automotive and biomedical industries

Material is an inseparable entity for humans to serve different purposes. However, synthetic polymers represent a major category of anthropogenic pollutants with detrimental impacts on natural ecosystems. This escalating environmental issue is characterized by the accumulation of non-biodegradable plastic materials, which pose serious threats to the health of our planet's ecosystem. Cellulose is becoming a focal point for many researchers due to its high availability. It has been used to serve various purposes. Recent scientific advancements have unveiled innovative prospects for the utilization of nanocellulose within the area of advanced science. This comprehensive review investigates deeply into the field of nanocellulose, explaining the methodologies employed in separating nanocellulose from cellulose. It also explains upon two intricately examined applications that emphasize the pivotal role of nanocellulose in nanocomposites. The initial instance pertains to the automotive sector, encompassing cutting-edge applications in electric vehicle (EV) batteries, while the second exemplifies the use of nanocellulose in the field of biomedical applications like otorhinolaryngology, ophthalmology, and wound dressing. This review aims to provide comprehensive information starting from the definitions, identifying the sources of the nanocellulose and its extraction, and ending with the recent applications in the emerging field such as energy storage and biomedical applications.

The impact of esterified nanofibrillated cellulose content on the properties of thermoplastic starch/PBAT biocomposite films through ball-milling

To enhance the mechanical properties and interfacial compatibility of thermoplastic starch (TPS) highly filled poly(butylene adipate co-terephthalate) (PBAT) composite films, esterified NFC was innovatively fabricated and introduced into the composite system. The influences of NFC content and ball-milling treatment were thoroughly investigated. Interestingly, the amphiphilic esterified NFC provided a "bridge-like" effect between TPS and PBAT interfaces, which significantly improved the interfacial compatibility and mechanical properties. Notably, the tensile properties of the composite films reached their maximums at a 7 wt% NFC content, displaying a tensile strength of 6.2 MPa and an elastic modulus of 263 MPa. These values corresponded to a 59 % and 180 % increase, respectively, compared to the composition without NFC. More importantly, ball-milling contributed to uniform dispersion and surface activation of NFC, preventing starch retrogradation, and enhancing the tensile strength and elastic modulus by 30.3 % and 56.6 %, respectively. Additionally, the film exhibited excellent UV-blocking, foldable, writable, and transparent performance. These findings provide valuable data supporting the expanded applications of starch-based composite films.

Preparation and Closed-Loop Recycling of Ultra-High-Filled Wood Flour/Dynamic Polyurethane Composites

The development of biomass-based composites has greatly reduced the daily consumption of plastics. However, these materials are rarely recyclable, thus, posing a severe threat to the environment. Herein, we designed and prepared novel composite materials with ultra-high biomass (i.e., wood flour) filling capacity and good closed-loop recycling properties. The dynamic polyurethane polymer was polymerized in situ on the surface of wood fiber, and then they were hot-pressed into composites. Fourier-transform infrared (FTIR), scanning electron microscopy (SEM), and dynamic thermomechanical analysis (DMA) measurements reveal good compatibility between the polyurethane and wood flour in the composites when the wood flour content is ≤80 wt%. The maximum tensile and bending strength of the composite are 37 and 33 MPa when the wood flour content is 80%. The higher wood flour content results in higher thermal expansion stability and creep resistance in the composites. Moreover, the thermal debonding of dynamic phenol–carbamate bonds facilitates the composites to undergo physical and chemical cycling. The recycled and remolded composites exhibit good mechanical property recovery rates and retain the chemical structures of the original composites.

Hydrophobic and oleophilic open-cell foams from in-situ microfibrillation blends of poly(lactic acid) and polytetrafluoroethylene: Selective oil-adsorption behaviors

Confronted with severe water contamination induced by the spillage of oils, seeking oil-selective adsorbent to recover oil from oily wastewater is extremely urgent. In particular, the functionalized polymer foams with open-cell structures are highly promising oil-selective adsorbent. Herein, a simple, effective and green method was presented to prepare open-cell poly(lactic acid) (PLA)/polytetrafluoroethylene (PTFE) foams with selective oil-adsorption behaviors via melt blending and supercritical CO₂ batch foaming technique. The introduction of PTFE had a distinct positive influence on the melt viscoelasticity and crystallization performances of various PLA specimens. The resulted PLA/PTFE4 foam with a volume expansion ratio of 10.17 ± 0.93 and a cell density of 1.58 × 10⁸ cells/cm³ possessed the highest open-cell content of 90.81 ± 0.78 %. Meanwhile, PLA/PTFE4 foam revealed oil/water selective adsorption capacity of 1.2-6.1 g/g for various organic solvents and oils. The adsorption capacity of PLA/PTFE4 foam for CCl₄ exhibited no significant decrement during ten adsorption-desorption cycles. This research offered a guideline for the manufacture of green environmental open-cell polymer foams for oil-selective adsorption.

Synthesis, Characterization, and Physical Properties of Maleic Acid-Grafted Poly(butylene adipate-co-terephthalate)/Cellulose Nanocrystal Composites

New sequences of nanocomposites including numerous maleic acid-grafted poly(butylene adipate-co-terephthalate) (g-PBAT) and cellulose nanocrystals (CNC) were efficaciously fabricated via transesterification and polycondensation processes with the covalent bonds between the polymer and reinforcing fillers. The grafting interaction of maleic acid onto PBAT was successfully demonstrated using Fourier transform infrared (FTIR) and ¹³C-nuclear magnetic resonance (NMR) spectra. The morphology of g-PBAT/CNC nanocomposites was investigated by wide-angle X-ray diffraction and transmission electron microscopy. Both results indicate that the CNC was randomly dispersed into the g-PBAT polymer matrix. The storage modulus at −80 and 25 °C was significantly enhanced with the incorporation of CNC into g-PBAT matrix. The crystallization rate of g-PBAT/CNC nanocomposites increased as the loading of CNC increased. With the incorporation of 3 wt% CNC, the half-time for crystallization of the g-PBAT/CNC composite decreased about 50~80% as compared with the same isothermal crystallization of pure polymer matrix. All water vapor permeation (WVP) values of all g-PBAT/CNC nanocomposites decreased as the loading of CNC increased. The decrease in WVP may be attributed to the addition of stiff CNC, causing the increase on the permeation route in the water molecules in the g-PBAT polymer matrix.

ScCO2-assisted fabrication and compressive property of poly (lactic acid) foam reinforced by in-situ polytetrafluoroethylene fibrils

As an effective alternative for petrochemical-based polymers, bio-based poly (lactic acid) (PLA) foam has been anticipated to alleviate enormous environmental pollution caused by microplastics. However, some difficulties involved in PLA foaming process due to the inherently poor melt strength and crystallization properties. In this context, a small amount of polytetrafluoroethylene (PTFE) was incorporated into PLA matrix to solve the aforementioned issues. Scanning electron microscopy measurement exhibited that PTFE fibrils and their physical networks were formed in molten PLA after blending. Due to these PTFE networks, approximately 2 orders of magnitudes increment in the storage modulus and more than 20% improvement in crystallinity of PLA were obtained. Diverse PLA samples were successfully foamed by a cost-effective, green and supercritical CO₂-assisted foaming method. The PLA/PTFE foam with the PTFE content of 5 wt% (PLA/PTFE5) possessed the smallest pore size (9.51 μm) and the highest pore density (2.60 × 10⁸ pores/cm³). In addition, the average specific compressive strength of PLA/PTFE5 foam was enhanced 30% in comparison with that of pure PLA foam. Overall, this study could provide a prospective strategy for developing bioderived and biodegradable polymer foams with controllable pore structures and high compression property.

A review of trends in the development of bionanocomposites from lignocellulosic and polyacids biomolecules as packing material making alternative: A bibliometric analysis

Contamination caused by the accumulation of petrochemical-based plastics has reached worrying magnitudes and led to the development of biopolymers as an option to mitigate the problem. This work thus presents a bibliometric analysis of all that concerns the development of such bionanocomposite materials, using ScientoPy and SciMAT software to establish associations between the number of published documents, countries, institutions and most relevant topics. The bionanocomposites topic was found to throw up the biggest number of documents associated (2008) with the different types of raw materials and methods used to obtain nanoparticles and their combination with biopolymeric materials, the result known as a "bionancomposite*". Analysis of the documents related to the application for development of packaging materials from biological molecules, carbohydrate polymers, compounds, conjugates, gels, glucans, hydrogels, membranes, mucilage (source unspecified), mucoadhesives, paper, polymers, polysaccharide, saccharides etc, is also presented, emphasizing mechanical, thermal and barrier properties, which, due to the inclusion of nanoparticles mainly from natural sources of cellulose, show increases of up to 30%. The inclusion of nanoparticles, especially those derived from cellulose sources, generally seeks to increase the properties of bionanocomposite materials. Regarding an increase in mechanical properties, specifically tensile strength, inclusions at percentages not exceeding 10 wt% can register increases that exceed 30% were reported.

Stiffening, strengthening, and toughening of biodegradable poly(butylene adipate-co-terephthalate) with a low nanoinclusion usage

Simultaneous stiffening, strengthening, and toughening of biodegradable polymers, such as poly(butylene adipate-co-terephthalate) (PBAT) and others, is necessary for their use in packaging and agriculture applications. However, a high content of nanoinclusions is usually required, leading to a tradeoff between composite toughness and strength or stiffness in the reinforcement. Herein, we report an iterative reinforcement strategy that uses one nanocomposite to reinforce PBAT. An in-situ grafting polymerized cellulose nanocrystal (CNC)/PBAT (CNC-g-PBAT) nanocomposite consisting of ungrafted/free PBAT (PBAT_f) was used as an inclusion directly to reinforce a commercial PBAT. At an exceptionally low CNC usage of 0.02 wt.%, we achieved a simultaneous enhancement of the Young's modulus by 26 %, tensile strength by 27 %, elongation at break by 37 %, and toughness by 56 % over those for PBAT. To the best of our knowledge, such reinforcement efficiency is the highest among similar biodegradable polymer nanocomposites reported in the literature. The rheology, differential scanning calorimetry, and wide-angle X-ray diffraction measurements confirmed the mechanical reinforcement attributed to a synergistic contribution from PBAT_f and CNC-g-PBAT. In particular, the use of PBAT_f enhanced both stiffness and toughness of the composites, while the CNC-g-PBAT interacted within the polymer matrix and increased the crystallinity of the polymer matrix, leading to the strengthening and toughening effect. The strategy proposed here is greatly beneficial to producing high-performance biodegradable polymer nanocomposite films for packaging and agricultural applications using a very low amount of nanoinclusion.

Effect of a Novel Chemical Treatment on the Physico-Thermal Properties of Sugarcane Nanocellulose Fiber Reinforced Epoxy Nanocomposites

In the present investigation, a novel chemical treatment was introduced for the extraction of nanocellulose fibers from sugarcane bagasse and applied as reinforcement material to enhance the physical properties and thermal stability of epoxy nanocomposites. Epoxy nanocomposites with different weight fractions were fabricated using a wet layup process followed by furnace heating to remove the residual moisture content. The influence of surface modified sugarcane nanocellulose fiber loading on morphological (transmission electron microscope) properties of epoxy nanocomposites was investigated. The porosity and water absorption increase with the increment in fiber weight fraction for both treated and untreated nanocellulose fiber-epoxy composites. Among the various treatment processes, the alkali-treated fibers reinforced epoxy composites showed better thermal stability and water absorption resistance under 10 wt.% of nanocellulose fiber reinforcement.

Multifunctional nanocellulose/metal and metal oxide nanoparticle hybrid nanomaterials

Nanocellulose materials are derived from cellulose, the most abundant biopolymer on the earth. Nanocellulose have been extensively used in the field of food packaging materials, wastewater treatment, drug delivery, tissue engineering, hydrogels, aerogels, sensors, pharmaceuticals, and electronic sectors due to their unique chemical structure and excellent mechanical properties. On the other hand, metal and metal oxide nanoparticles (NP) such as Ag NP, ZnO NP, CuO NP, and Fe₃O₄ NP have a variety of functional properties such as UV-barrier, antimicrobial, and magnetic properties. Recently, nanocelluloses materials have been used as a green template for producing metal or metal oxide nanoparticles. As a result, multifunctional nanocellulose/metal or metal oxide hybrid nanomaterials with high antibacterial properties, ultraviolet barrier properties, and mechanical properties were prepared. This review emphasized recent information on the synthesis, properties, and potential applications of multifunctional nanocellulose-based hybrid nanomaterials with metal or metal oxides such as Ag NP, ZnO NP, CuO NP, and Fe₃O₄ NP. The nanocellulose-based hybrid nanomaterials have huge potential applications in the area of food packaging, biopharmaceuticals, biomedical, and cosmetics.

Polymer Composites Reinforced with Natural Fibers and Nanocellulose in the Automotive Industry: A Short Review

Environmental concerns and cost reduction have encouraged the use of natural fillers as reinforcement in polymer composites. Currently, a wide variety of reinforcement, such as natural fibers and nanocellulose, are used for this purpose. Composite materials with natural fillers have not only met the environmental appeal, but also contribute to developing low-density materials with improved properties. The production of natural fillers is unlimited around the world, and many species are still to be discovered. Their processing is considered beneficial since the natural fillers do not cause corrosion or great wear of the equipment. For these reasons, polymer reinforced with natural fillers has been considered a good alternative for obtaining ecofriendly materials for several applications, including the automotive industry. This review explores the use of natural fillers (natural fibers, cellulose nanocrystals, and nanofibrillated cellulose) as reinforcement in polymer composites for the automotive industry.

Cellulose nanomaterials as green nanoreinforcements for polymer nanocomposites

Unexpected and attractive properties can be observed when decreasing the size of a material down to the nanoscale. Cellulose is no exception to the rule. In addition, the highly reactive surface of cellulose resulting from the high density of hydroxyl groups is exacerbated at this scale. Different forms of cellulose nanomaterials, resulting from a top-down deconstruction strategy (cellulose nanocrystals, cellulose nanofibrils) or bottom-up strategy (bacterial cellulose), are potentially useful for a large number of industrial applications. These include the paper and cardboard industry, use as reinforcing filler in polymer nanocomposites, the basis for low-density foams, additives in adhesives and paints, as well as a wide variety of filtration, electronic, food, hygiene, cosmetic and medical products. This paper focuses on the use of cellulose nanomaterials as a filler for the preparation of polymer nanocomposites. Impressive mechanical properties can be obtained for these materials. They obviously depend on the type of nanomaterial used, but the crucial point is the processing technique. The emphasis is on the melt processing of such nanocomposite materials, which has not yet been properly resolved and remains a challenge.This article is part of a discussion meeting issue 'New horizons for cellulose nanotechnology'.

Mechanical, morphological and structural properties of cellulose nanofibers reinforced epoxy composites

Present study, deals about isolation and characterization of cellulose nanofibers (CNFs) from the Northern Bleached Softwood Kraft (NBSK) pulp, fabrication by hand lay-up technique and characterization of fabricated epoxy nanocomposites at different filler loadings (0.5%, 0.75%, 1% by wt.). The effect of CNFs loading on mechanical (tensile, impact and flexural), morphological (scanning electron microscope and transmission electron microscope) and structural (XRD and FTIR) properties of epoxy composites were investigated. FTIR analysis confirms the introduction of CNFs into the epoxy matrix while no considerable change in the crystallinity and diffraction peaks of epoxy composites were observed by the XRD patterns. Additions of CNFs considerably enhance the mechanical properties of epoxy composites but a remarkable improvement is observed for 0.75% CNFs as compared to the rest epoxy nanocomposites. In addition, the electron micrographs revealed the perfect distribution and dispersion of CNFs in the epoxy matrix for the 0.75% CNFs/epoxy nanocomposites, while the existence of voids and agglomerations were observed beyond 0.75% CNFs filler loadings. Overall results analysis clearly revealed that the 0.75% CNFs filler loading is best and effective with respect to rest to enhance the mechanical and structural properties of the epoxy composites.

Nanocellulose, a tiny fiber with huge applications

Nanocellulose is of increasing interest for a range of applications relevant to the fields of material science and biomedical engineering due to its renewable nature, anisotropic shape, excellent mechanical properties, good biocompatibility, tailorable surface chemistry, and interesting optical properties. We discuss the main areas of nanocellulose research: photonics, films and foams, surface modifications, nanocomposites, and medical devices. These tiny nanocellulose fibers have huge potential in many applications, from flexible optoelectronics to scaffolds for tissue regeneration. We hope to impart the readers with some of the excitement that currently surrounds nanocellulose research, which arises from the green nature of the particles, their fascinating physical and chemical properties, and the diversity of applications that can be impacted by this material.

Influence of low contents of superhydrophilic MWCNT on the properties and cell viability of electrospun poly (butylene adipate-co-terephthalate) fibers

The use of poly (butylene adipate-co-terephthalate) (PBAT) in tissue engineering, more specifically in bone regeneration, has been underexplored to date due to its poor mechanical resistance. In order to overcome this drawback, this investigation presents an approach into the preparation of electrospun nanocomposite fibers from PBAT and low contents of superhydrophilic multi-walled carbon nanotubes (sMWCNT) (0.1-0.5wt.%) as reinforcing agent. We employed a wide range of characterization techniques to evaluate the properties of the resulting electrospun nanocomposites, including Field Emission Scanning Electronic Microscopy (FE-SEM), Transmission Electronic Microscopy (TEM), tensile tests, contact angle measurements (CA) and biological assays. FE-SEM micrographs showed that while the addition of sMWCNT increased the presence of beads on the electrospun fibers' surfaces, the increase of the neat charge density due to their presence reduced the fibers' average diameter. The tensile test results pointed that sMWCNT acted as reinforcement in the PBAT electrospun matrix, enhancing its tensile strength (from 1.3 to 3.6MPa with addition of 0.5wt.% of sMWCNT) and leading to stiffer materials (lower elongation at break). An evaluation using MG63 cells revealed cell attachment into the biomaterials and that all samples were viable for biomedical applications, once no cytotoxic effect was observed. MG-63 cells osteogenic differentiation, measured by ALP activity, showed that mineralized nodules formation was increased in PBAT/0.5%CNTs when compared to control group (cells). This investigation demonstrated a feasible novel approach for producing electrospun nanocomposites from PBAT and sMWCNT with enhanced mechanical properties and adequate cell viability levels, which allows for a wide range of biomedical applications for these materials.