Influence of HNO3/H3PO4–NANO2 mediated oxidation on the structure and properties of cellulose fibers

Evaluation of sulfonated oxidized chitosan antifungal activity against Fusarium graminearum

Chitosan biomaterials are widely used in the biological area because of their broad-spectrum antibacterial activity. However, chitosan cannot be dissolved in a neutral solution, limiting its application in various fields seriously. In this study, water-soluble sulfonated oxidized chitosan (SOCS) with antifungal activity were prepared by oxidization and sulfonation. Its structure was clearly confirmed by spectroscopy data (FTIR, 1H NMR, ¹³C NMR) and elemental analysis. SEM images of OCS and SOCS revealed that there was a little curly and an irregular sheet-like morphologies on them which was attributed to the oxidation and sulfonation on CS. Moreover, the FTIR and NMR indicated that -OH on the CS was oxidized into -COOH on the OCS and -SO₃H groups on the SOCS. The EDS results of OCS and SOCS confirmed the presence of the oxygen element in OCS and the S element in SOCS. All studies confirmed the OCS and SOCS were synthesized successfully. Furthermore, the inhibitory activity of SOCS biocomposites against plant pathogenic fungi, (Fusarium graminearum), was investigated. The results showed that the SOCS have significant inhibitory effects on the mycelial growth of F. graminearum. The EC₅₀ value of SOCS against F. graminearum is 79.46 μg/mL. The research results presented above indicated that SOCS can be used as a candidate material for the control of plant pathogenic fungi, and can broaden the application of chitosan materials in plant protection and sustainable agriculture.Research highlightsSOCS showed better solubility in deionized water.The antifungal effect of SOCS dissolved in acetic acid was higher than that of CS dissolved in acetic acid.SOCS dissolved in water can cause an inhibitory effect on F. graminearum at lower concentrations.

Structure and properties of oxycellulose fabric crosslinked with soy protein

Cotton is an important renewable biopolymer with extensive applications in various fields including textiles. In the current study a soy protein (SP) crosslinked cotton fabric (SPCCF) was prepared through the reaction of carboxyl cotton fabric with soy protein without using crosslinking agents. FTIR analysis of SPCCF samples indicated that carboxyl groups in oxycellulose fabric have reacted with amino groups of SP to give the corresponding C-N bond, that was also reconfirmed by XPS spectra and TGA/DTG analyses of the grafted fabrics. The resulting SPCCF fabrics acquired under the optimized conditions exhibited the improved tensile strength and capillary effect as compared to the oxidized cotton fabric. The ungrafted and grafted fabrics were further evaluated for dyeing property, as a result, the SPCCF fabrics showed markedly improved colour strength when dyed with acid dyes. The fastness properties of dyeability for the dyed SPCCF fabrics were also good compared with that of ungrafted fabrics by dyeing. Shikonin as a kind of Chinese medicine was found to immobilize on the SPCCF fabric through treatment with shikonin aqueous solution, such fabric displayed effective antibacterial activities against both gram-positive and gram-negative bacteria with durability of 30 washes. These results suggest that the SPCCF can be suitable for medical protective textiles by immobilizing drugs.

Improving the Anti-Pilling Performance of Cellulose Fiber Blended Knitted Fabrics with 2,4,6-Trichloropyrimidine Treatment

Pilling is a common and unresolved problem in knitted fabrics, especially for the cellulose fiber blended fabrics, which not only causes an unattractive appearance and an uncomfortable handle, but also reduces the added value of the products. In this study, four different kinds of knitted fabrics were treated with 2,4,6-trichloropyrimidine (TLP) alkaline emulsion by dipping and pad–dry–cure modification processes. The surface morphology and chemical structure of original and treated fabrics were characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD). The anti-pilling performance, thermal properties, physical and mechanical properties and color features of treated fabrics were also evaluated. The results indicated that TLP was successfully covalently crosslinked onto the surface of the cellulose fibers. The dipping process resulted in a better anti-pilling property than that of the pad–dry–cure process, and both treatments could bring about an excellent anti-pilling property and outstanding laundering durability. A pilling grade of 4.5 was achieved for the treated polyester/viscose (T/V) fabric with the dipping process even after 20 washing cycles. In addition, the treated fabrics displayed an enhanced antistatic property and still maintained a soft handle. Besides, the bursting strength and air permeability of treated samples were found to have a slight deterioration, while no apparent differences were found in the color parameters and colorfastness of dyed fabrics. The above results demonstrate that 2,4,6-trichloropyrimidine has the potential application prospect in the functional finishing and home-caring of textiles.

Structure and Properties of Oxidized Chitosan Grafted Cashmere Fiber by Amide Covalent Modification

In this study, oxidized chitosan grafted cashmere fibers (OCGCFs) were obtained by crosslinking the oxidized chitosan onto cashmere fibers by amide covalent modification. A novel method was developed for the selective oxidation of the C6 primary hydroxyls into carboxyl groups for chitosan. The effect of oxidization reaction parameters of HNO₃/H₃PO₄-NaNO₂ mediated oxidation system on the oxidation degree, structure, and properties of chitosan were investigated. The chemical structure of the oxidized chitosan was characterized by solid-state cross-polarization magic angle spinning carbon-13 Nuclear Magnetic Resonance (CP/MAS ¹³C-NMR), Fourier transform infrared spectroscopy (FT-IR), and its morphology was investigated by scanning electron microscopy (SEM). Subsequently, the effect of the oxidized chitosan grafting on OCGCF was examined, and the physical properties, moisture regain, and antibacterial activity of OCGCFs were also evaluated. The results showed that oxidation of chitosan mostly occurred at the C6 primary hydroxyl groups. Moreover, an oxidized chitosan with 43.5-56.8% carboxyl content was realized by ranging the oxidation time from 30 to 180 min. The resulting OCGCF had a C-N amido bond, formed as a result of the reaction between the primary amines in the cashmere fibers and the carboxyl groups in the oxidized chitosan through the amide reaction. The OCGCF exhibited good moisture regain and remarkable bacteriostasis against both Staphylococcus aureus and Escherichia coli bacteria with its durability.

Durable Antipilling Modification of Cotton Fabric with Chloropyrimidine Compounds

Cotton fabric, a natural cellulose material, is widely used in the textile industry for its excellent properties. However, its application in some fields are seriously restricted because of its poor antipilling behavior. In this study, cotton fabrics were modified with 2,4,6-trichloropyrimidine (TLP), 2,4-dichloro-5-methoxypyrimidine (DMP), and 2-amino-4,6-dichloropyridine (ADP). The surface morphology and chemical structure of the modified cotton fabric were characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD). Furthermore, the antipilling behavior, dyeing properties, thermal properties, and mechanical properties of modified cotton fabric were evaluated. The results showed that chloropyrimidine compounds were successfully grafted onto the surface of the cotton fabric, leading to excellent and durable antipilling activity of grade 3-4 even after 10 washes. Moreover, compared with control cotton fabric, the heat release rate (HRR) and total heat release (THR) of TLP-modified cotton fabric decreased to 173.2 W/g (42.3% reduction) and 11.3 KJ/g (13.7% reduction), respectively. In addition, the increased K/S value of modified cotton fabrics dyed with reactive dyes indicated that the modification can enhance the dyability of cotton fabric. This technique provides a simple and versatile method for improving the antipilling behavior of cellulosic materials and supports further preparation of functional textiles.

Synthesis and Characterization of Nanofiber of Oxidized Cellulose from Nata De Coco

Oxidized cellulose (OC) nanofiber was successfully prepared from the dry sheet of Nata De Coco (DNDC) using the mixture system of HNO3/H3PO4–NaNO2for the first time. The carboxyl content of the OC was investigated at different conditions (HNO3/H3PO4ratios, reaction times, and reaction temperatures). The results revealed that the carboxyl content of the OC increased along with the reaction time, which yielded 0.6, 14.8, 17.5, 20.9, 21.0, and 21.0% after 0, 6, 12, 36, and 48 hours, respectively. The reaction yields of the OC ranged between 79% and 85% when using HNO3/H3PO4ratio of 1 : 3, 1.4% wt of NaNO2at 30°C at different reaction times. From the structural analysis, the OC products showed a nanofibrous structure with a diameter of about 58.3–65.4 nm. The Fourier transform infrared spectra suggested the formation of carboxyl groups in the OC after oxidation reaction. The crystallinity and crystalline index decreased with an increase of reaction time. The decrease of crystallinity from oxidation process agreed with the decrease of degree of polymerization from the hydrolysis ofβ-1,4-glycosidic linkages in the cellulose structure. The thermal gravimetric analysis results revealed that the OC products were less thermally stable than the raw material of DNDC. In addition, the OC products showed blood agglutinating property by dropping blood on the sample along with excellent antibacterial activity.

Optimization of cellulose and sugarcane bagasse oxidation: Application for adsorptive removal of crystal violet and auramine-O from aqueous solution

Cellulose (Cel) and sugarcane bagasse (SB) were oxidized with an H₃PO₄-NaNO₂ mixture to obtain adsorbent materials with high contents of carboxylic groups. The oxidation reactions of Cel and SB were optimized using design of experiments (DOE) and response surface methodology (RSM). The optimized synthesis conditions yielded Cox and SBox with 4.8mmol/g and 4.5mmol/g of carboxylic acid groups, respectively. Cox and SBox were characterized by FTIR, TGA, PZC and solid-state ¹³C NMR. The adsorption of the model cationic dyes crystal violet (CV) and auramine-O (AO) on Cox and SBox in aqueous solution was investigated as a function of the solution pH, the contact time and the initial dye concentration. The adsorption of CV and AO on Cox was described by the Elovich equation and the pseudo-first-order kinetic model respectively, while the adsorption of CV and AO on SBox was described by the pseudo-second-order kinetic model. Adsorption isotherms were well fitted by the Langmuir and Konda models, with maximum adsorption capacities (Q_max) of 1117.8mg/g of CV and 1223.3mg/g of AO on Cox and 1018.2mg/g of CV and 682.8mg/g of AO on SBox. Desorption efficiencies were in the range of 50-52% and re-adsorption capacities varied from 65 to 81%, showing the possibility of reuse of both adsorbent materials.

Cellulose Nanofibril Based-Aerogel Microreactors: A High Efficiency and Easy Recoverable W/O/W Membrane Separation System

Hereby we report a novel cellulose nanofirbril aerogel-based W/O/W microreactor system that can be used for fast and high efficient molecule or ions extraction and separation. The ultra-light cellulose nanofibril based aerogel microspheres with high porous structure and water storage capacity were prepared. The aerogel microspheres that were saturated with stripping solution were dispersed in an oil phase to form a stable water-in-oil (W/O) suspension. This suspension was then dispersed in large amount of external waste water to form W/O/W microreactor system. Similar to a conventional emulsion liquid membrane (ELM), the molecules or ions in external water can quickly transport to the internal water phase. However, the microreactor is also significantly different from traditional ELM: the water saturated nanocellulose cellulose aerogel microspheres can be easily removed by filtration or centrifugation after extraction reaction. The condensed materials in the filtrated aerogel particles can be squeezed and washed out and aerogel microspheres can be reused. This novel process overcomes the key barrier step of demulsification in traditional ELM process. Our experimental indicates the novel microreactor was able to extract 93% phenol and 82% Cu²⁺ from external water phase in a few minutes, suggesting its great potential for industrial applications.

Structure and properties of silk fibroin grafted carboxylic cotton fabric via amide covalent modification

A novel eco-friendly production of silk fibroin-grafted carboxylic cotton fabrics without using any crosslinking agents was developed via the reaction of silk fibroin with oxidized cotton. The effect of reaction parameters on mechanical properties of oxidized fabrics and graft add-on of silk fibroin in grafted fabrics was examined. The results showed that appropriate oxidation time of HNO₃/H₃PO₄-NaNO₂ mixture and grafting time of fibroin were 45min and 2h respectively. FTIR analysis of grafted sample indicated that the CN amido bond was generated through the reaction between primary amines in silk fibroin and carboxyl groups in oxidized cotton, which was further confirmed by XPS spectra. The grafted fabrics were also evaluated for physical properties like tensile strength, wrinkle recovery angle, moisture regain and yellowness index. Cactus flavonoid coated on grafted fabric through treatment with flavonoid extract of cactus, such treated fabric exhibited a highly inhibitory effect against both Staphylococcus aureus and Escherichia coli bacteria.