Synthesis of alginate derivative via the Ugi reaction and its characterization

Fabrication of self-assembled micelles based on amphiphilic oxidized sodium alginate grafted oleoamine derivatives via Schiff base reduction amination reaction for delivery of hydrophobic food active ingredients

The application of hydrophobic β-carotene in the food industry are limited due to its susceptibility to light, high temperature, pH value, and other factors, leading to poor stability and low bioavailability. To address this problem, we adopt a more green and environmentally friendly reducing agent, 2-methylpyridine borane complex (pic-BH3), instead of traditional sodium borohydride, to achieve the simple green and efficient synthesis of amphiphilic oxidized sodium alginate grafted oleoamine derivatives (OSAOLA) through the reduction amination reaction of Schiff base. The resultant OSAOLA with the degree of substitution (DS) of 7.2 %, 23.6 %, and 38.8 % were synthesized, and their CMC values ranged from 0.0095 to 0.062 mg/mL, indicating excellent self-assembly capability in aqueous solution. Meanwhile, OSAOLA showed no obvious cytotoxicity to RAW 264.7 cells, thus revealing good biocompatibility. Furthermore, β-carotene, as the hydrophobic active ingredients in foods was successfully encapsulated in the OSAOLA micelles by ultrasonic-dialysis method. The prepared drug-loaded OSAOLA micelles could maintain good stability when stored at room temperature for 7 d. Additionally, they were able to continuously release β-carotene and exert long-term effects in pH 7.4 PBS at 37 °C, effectively improving the bioavailability of β-carotene, which exhibited tremendous application potential in functional food and biomedical fields.

New sorbent-based hydrophobic alginic acid derivatives for fat removal in multi-pesticide residues: analysis of a fatty food sample

Hydrophobic alginic acid derivatives were synthesized with various aliphatic hydrocarbon chains for fat removal in an analysis of multi-pesticide residues in a fatty food sample. First, alginic acid was chemically modified using eco-friendly ultrasound-assisted esterification with different alcohols, namely, hydrophobic alginic acid-methanol (HAA-C1), hydrophobic alginic acid-butanol (HAA-C4), and hydrophobic alginic acid-octadecanol (HAA-C18). The degree of esterification (DE) was determined by titration, and the results ranged from 57.3% to 63.7%. The physicochemical properties of the synthesized hydrophobic alginic acids (HAAs) were studied using FT-IR, XRD, TGA, and FE-SEM. Subsequently, the performance of the HAAs was checked and evaluated for the removal of fat from a fatty food sample by calculating the fat removal percentage and the determination of 214 pesticide residues in the fatty food sample. For the fat removal percentage application, the HAAs were able to efficiently remove between 77% and 83% of the fat; HAA-C18 had the highest percentage. Regarding the pesticide residue application, HAAs were also able to remove the fat content from the fatty food sample without a significant effect on the pesticide substances. The recoveries of the detected pesticide compounds were between 80% and 120% for all HAAs. However, there were various missing pesticide compounds for HAAs. The number of missing pesticide compounds was 19, 6, and 33 for HAA-C1, HAA-C4, and HAA-C18, respectively. HAA-C4 had medium hydrophobicity and it lost fewer pesticides than the other HAAs. This was because the multi-pesticide mixture had various classes of chemical structure; hence, it had different polarity powers. We concluded that HAAs are developable and applicable to be safely used as a green material in diverse fatty food sample analysis applications.

Construction and Evaluation of Alginate Dialdehyde Grafted RGD Derivatives/Polyvinyl Alcohol/Cellulose Nanocrystals IPN Composite Hydrogels

To enhance the mechanical strength and cell adhesion of alginate hydrogel, making it satisfy the requirements of an ideal tissue engineering scaffold, the grafting of Arg-Gly-Asp (RGD) polypeptide sequence onto the alginate molecular chain was conducted by oxidation of sodium periodate and subsequent reduction amination of 2-methylpyridine borane complex (2-PBC) to synthesize alginate dialdehyde grafted RGD derivatives (ADA-RGD) with good cellular affinity. The interpenetrating network (IPN) composite hydrogels of alginate/polyvinyl alcohol/cellulose nanocrystals (ALG/PVA/CNCs) were fabricated through a physical mixture of ion cross-linking of sodium alginate (SA) with hydroxyapatite/D-glucono-δ-lactone (HAP/GDL), and physical cross-linking of polyvinyl alcohol (PVA) by a freezing/thawing method, using cellulose nanocrystals (CNCs) as the reinforcement agent. The effects of the addition of CNCs and different contents of PVA on the morphology, thermal stability, mechanical properties, swelling, biodegradability, and cell compatibility of the IPN composite hydrogels were investigated, and the effect of RGD grafting on the biological properties of the IPN composite hydrogels was also studied. The resultant IPN ALG/PVA/CNCs composite hydrogels exhibited good pore structure and regular 3D morphology, whose pore size and porosity could be regulated by adjusting PVA content and the addition of CNCs. By increasing the PVA content, the number of physical cross-linking points in PVA increased, resulting in greater stress support for the IPN composite hydrogels of ALG/PVA/CNCs and consequently improving their mechanical characteristics. The creation of the IPN ALG/PVA/CNCs composite hydrogels' physical cross-linking network through intramolecular or intermolecular hydrogen bonding led to improved thermal resistance and reduced swelling and biodegradation rate. Conversely, the ADA-RGD/PVA/CNCs IPN composite hydrogels exhibited a quicker degradation rate, attributed to the elimination of ADA-RGD by alkali. The results of the in vitro cytocompatibility showed that ALG/0.5PVA/0.3%CNCs and ADA-RGD/PVA/0.3%CNCs composite hydrogels showed better proliferative activity in comparison with other composite hydrogels, while ALG/PVA/0.3%CNCs and ADA-RGD/PVA/0.3%CNCs composite hydrogels displayed obvious proliferation effects, indicating that PVA, CNCs, and ADA-RGD with good biocompatibility were conducive to cell proliferation and differentiation for the IPN composite hydrogels.

Nano-SiO2 reinforced alginate-chitosan-gelatin nanocomposite hydrogels with improved physicochemical properties and biological activity

Alginate (Alg) hydrogels possess desirable advantages for application in tissue engineering; however, they are limited by their weak mechanical properties, poor chronical stability in phosphate buffered saline, and absence of mammalian cell recognition sites, severely restricting their biomedical applications. To overcome these limitations, we integrated Alg hydrogels with nano-silica (SiO2) to produce nano-SiO2 reinforced Alg-chitosan-gelatin nanocomposite hydrogels (Alg/SiO2-CHI-GA NCH) for biomedical purposes, utilizing Chitosan (CHI) and gelatin (GA) in an alternate electrostatic adsorption. Specifically, we investigated the regulatory and promotional effects of the nano-SiO2 on the morphological structure, mechanical properties, thermal stability, rheological properties, swelling, biodegradability, biomineralization and cytocompatibility of the resultant Alg/SiO2-CHI-GA NCH. The experimental findings demonstrate that the constructed Alg/SiO2-CHI-GA NCH exhibited uniform morphology and a regular structure. Upon freeze-drying, the internal cross-sections of the NCH exhibited a honeycomb porous structure. Furthermore, the physicochemical properties and biological activities of the prepared Alg/SiO2-CHI-GA NCH were regulated to some extent by nano-SiO2 content. Notably, nano-SiO2 inclusion enhanced the attachment and viability of MG63 and MC3T3-E1 cells and induced three-dimensional cell growth in ALG/SiO2-CHI-GA NCH. Among the fabricated NCH, Alg/SiO2-CHI-GA NCH with 0.5% and 1.0% (w/v) nano-SiO2 exhibited significant proliferative activity, which is attributable to their high porosity and uniform cell adhesion. Furthermore, the alkaline phosphatase activity in the cells gradually increased with increasing of nano-SiO2 amount, indicating the favorable effect of nano-SiO2 on the osteogenic differentiation of MG63 and MC3T3-E1 cells. Our study findings provide a comprehensive foundation for the structural- and property-related limitations of Alg hydrogels in biomedicine, thereby expanding their potential applications in tissue engineering.

Application of oleaster leaves (Elaeagnus angustifolia L.) essential oil and natural nanoparticle preservatives in frankfurter-type sausages: An assessment of quality attributes and stability during refrigerated storage

The effects of oleaster leave essential oil (OLEOs: 1000 and 2000 ppm) in combination with nisin nanoparticles (200 ppm) and ε-polylysine nanoparticles (2000 ppm) on the physicochemical, microbiological and sensory properties of the emulsion-type sausages without added chemical nitrite/nitrate salts were evaluated during 45 days of storage. Nanoparticle attributes were assessed, including encapsulation efficiency (EE%), zeta potential, nanoparticles size, FTIR analysis, and thermal stability (DSC). Overall, ε-PL nanoparticles (ε-PL-NPs) were thermally more stable and showed higher EE% (91.52%) and zeta potential (37.80%) as compared to nisin nanoparticles (82.85%) and (33.60%), respectively. The use of combined ε-PL-NPs (2000 ppm) + Ni-NPs (200 ppm) with oleaster leaves essential oil (2000 ppm) resulted in a higher pH value (5.88), total phenolic content (10.45 mg/100 g) and lower TBARS (2.11 mg/kg), and also decreased total viable bacteria (1.28 Log CFU/g), Clostridium perfringens (1.43 Log CFU/g), E. coli (0.24 Log CFU/g), Staphylococcus aureus (0.63 Log CFU/g), and molds and yeasts (0.86 Log CFU/g) count in samples at day 45 in comparison to the control (120 ppm nitrite). The consumers approved sensory traits in nitrite-free formulated sausages containing ε-PL-NPs and Ni-NPs combined with OLEOs.

Enhanced neural differentiation by applying electrical stimulation utilizing conductive and antioxidant alginate-polypyrrole/poly-l-lysine hydrogels

The challenge of restoration from neurodegenerative disorder requires effective solutions. To enhance the healing efficiencies, scaffolds with antioxidant activities, electroconductivity, and versatile features to encourage neuronal differentiation are potentially useful. Herein, polypyrrole-alginate (Alg-PPy) copolymer was used to design antioxidant and electroconductive hydrogels through the chemical oxidation radical polymerization method. The hydrogels have antioxidant effects to combat oxidative stress in nerve damage thanks to the introduction of PPy. Additionally, poly-l-lysine (PLL) provided these hydrogels with a great differentiation ability of stem cells. The morphology, porosity, swelling ratio, antioxidant activity, rheological behavior, and conductive characteristics of these hydrogels were precisely adjusted by altering the amount of PPy. Characterization of hydrogels showed appropriate electrical conductivity and antioxidant activity for neural tissue applications. Cytocompatibility, live/dead assays, and Annexin V/PI staining by flow cytometry using P19 cells confirmed the excellent cytocompatibility and cell protective effect under ROS microenvironment of these hydrogels in both normal and oxidative conditions. The neural marker investigation in the induction of electrical impulses was assessed through RT-PCR and immunofluorescence assay, demonstrating the differentiation of P19 cells to neurons cultured in these scaffolds. In summary, the antioxidant and electroconductive Alg-PPy/PLL hydrogels demonstrated excellent potential as promising scaffolds for treating neurodegenerative disorders.

Coexistence of aggregates and flat states of hydrophobically modified sodium alginate at an oil/water interface: A molecular dynamics study

Hydrophobically modified sodium alginate stabilizes benzene in water emulsions. The stability of the emulsion is related to the interface properties at the mesoscopic scale, but the details of the polymer adsorption, conformation and organization at oil/water interfaces at the microscopic scale remain largely elusive. In this study, hydrophobically modified sodium alginate was used as a representative of amphiphilic polymers for prediction of distribution of HMSA at the oil/water interface by coarse-grained molecular dynamics simulation. The result showed that driven by the interaction energy between the hydrophobic segment and benzene, HMSA will actively accumulate at the oil/water interface. The HMSA molecules parallel to the oil/water interface prevent the hydrophobic segments in the micelles from approaching the oil/water interface, so that the micelles can exist stably by steric hindrance. This study would be helpful to understand the aggregation behavior of amphiphilic polymers at the oil/water interface, these results can have applications in diverse sectors such as drug, food industry, where polymers are used to stabilize emulsions.

Light-dimerization telechelic alginate-based amphiphiles reinforced Pickering emulsion for 3D printing

Functional Pickering emulsions that depend on the interparticle interactions hold promise for building template materials. A novel coumarin-grafting alginate-based amphiphilic telechelic macromolecules (ATMs) undergoing photo-dimerization enhanced particle-particle interactions and changed the self-assembly behavior in solutions. The influence of self-organization of polymeric particles on the droplet size, microtopography, interfacial adsorption and viscoelasticity of Pickering emulsions were further determined by multi-scale methodology. Results showed that stronger attractive interparticle interactions of ATMs (post-UV) endowed Pickering emulsion with small droplet size (16.8 μm), low interfacial tension (9.31 mN/m), thick interfacial film, high interfacial viscoelasticity and adsorption mass, and well stability. The high yield stress, outstanding extrudability (n₁ < 1), high structure maintainability, and well shape retention ability, makes them ideal inks for direct 3D printing without any additions. The ATMs provides an increased capacity to produce stable Pickering emulsions with tailoring their interfacial performances and, providing a platform for fabricating and developing alginate-based Pickering emulsion-templated materials.

Comparative Study of Physicochemical Properties of Alginate Composite Hydrogels Prepared by the Physical Blending and Electrostatic Assembly Methods

Alginate hydrogel commonly suffers from defects, such as weak mechanical properties, the shortage of long-term stability in physiological medium and the lack of mammalian cell adhesivity due to its strong hydrophilicity in biomedical application. For this reason, the homogeneous alginate hydrogels (Alg Gel) were successfully prepared by the D-glucono-δ-lactone/hydroxyapatite (HAP/GDL) cross-linking system, and then, the physical blending and alternating electrostatic assembly technology were proposed to fabricate alginate composite hydrogels (Alg-GT, Alg-CS-GT and ALG/GT-CS). The feasibility of the design methods was verified through the comparative analysis of their physicochemical properties and biological activity. In particular, the effects of physical blending and alternating electrostatic assembly technology on the pore structure, mechanical properties, swelling, degradation, cell adhesion and proliferation of composite hydrogels were also investigated. Experimental results showed that the formation of polyelectrolyte complexes by electrostatic assembly between biological macromolecules and the covalent cross-linking of EDC/NHS to GT improved the vulnerability of ion cross-linking, enhanced the mechanical properties and swelling stability of the composite hydrogels, and regulated their pore structure and in vitro biodegradability properties. Furthermore, MC3T3-E1 cells could exhibit good cell adhesion, cell viability and cell proliferation on the alginate composite hydrogels. Among them, Alg-CS-GT showed the best cell proliferation ability and differentiation effect due to its good cell adhesion. In view of the excellent physicochemical properties and biological activity of Alg-CS-GT, it exhibited great potential in biomedical application for tissue engineering.

Quaternized Sodium Alginate-g-Ethyl-Oxazoline Copolymer Brushes and Their Supramolecular Networks via Hydrogen Bonding

Novel copolymer brushes of quaternized sodium alginate-g-(2-ethyl-2-oxazoline)_n are achieved by the grafting reaction of 2-ethyl-2-oxazoline (EOX) from benzyl bromide groups in quaternized sodium alginate (QSA). The average number of (EOX)_n structural units is mediated from 1 to 5 by changing the molar ratio of the EOX monomer to benzyl bromide side groups. There exists obvious microphase separation between the QSA backbone and (EOX)_n segments in the copolymer brushes due to their thermodynamic incompatibility. The strong hydrogen-bonding interaction between -OH groups in the backbone and N─C═O groups in (EOX)_n segments is helpful for the construction of reversible supramolecular networks. The copolymer brushes show low cytotoxicity for HeLa cells and good antibacterial properties for Escherichia coli and Staphylococcus aureus for the contribution of hydrophilic (EOX)_n segments and antibacterial activity of the quaternary ammonium. The antiprotein behavior of polymer surfaces is improved after rearrangement of (EOX)_n segments by tetrahydrofuran (THF) vapor induction. These copolymer brushes have good prospects for biomedical applications.

Tuning self-assembly of amphiphilic sodium alginate-decorated selenium nanoparticle surfactants for antioxidant Pickering emulsion

Delivering effectively zero-valent selenium nanoparticles (SeNPs) and develop its functions in more fields is still a challenge. Herein, a novel template for the preparation and stabilization of SeNP-based surfactants was developed, amphiphilic sodium alginate (APSA), which can self-assemble into micelles in an aqueous solution. Primarily, physicochemical properties of SeNPs stabilized by APSA with different molecular weights were compared and the interaction mechanism of APSA/SeNPs was investigated. Moreover, a functional Pickering emulsion (PE) was presented using the SeNP-based surfactants. Results showed that high molecular weight-stabilized SeNPs had small particle size (54.72 nm) and great stability due to the hydrogen bonding between Se atoms and APSA. The "soft" particle-decorated SeNPs with interface activity formed a dense interfacial layer on the oil-water interface, which exhibited excellent antioxidant properties. The contents of lipid hydrogen peroxide (LH) and malondialdehyde (MDA) were significantly reduced by 88.7% and 63.4%. Overall, SeNPs stabilized by APSA have great application potential as an emulsifier and antioxidant in industrial field.

A Study on the Correlation between the Oxidation Degree of Oxidized Sodium Alginate on Its Degradability and Gelation

Oxidized sodium alginate (OSA) is selected as an appropriate material to be extensively applied in regenerative medicine, 3D-printed/composite scaffolds, and tissue engineering for its excellent physicochemical properties and biodegradability. However, few literatures have systematically investigated the structure and properties of the resultant OSA and the effect of the oxidation degree (OD) of alginate on its biodegradability and gelation ability. Herein, we used NaIO₄ as the oxidant to oxidize adjacent hydroxyl groups at the C-2 and C-3 positions on alginate uronic acid monomer to obtain OSA with various ODs. The structure and physicochemical properties of OSA were evaluated by Fourier transform infrared spectroscopy (FT-IR), ¹H nuclear magnetic resonance (¹H NMR), X-ray Photoelectron Spectroscopy (XPS), X-ray Diffraction (XRD), and thermogravimetric analysis (TGA). At the same time, gel permeation chromatography (GPC) and a rheometer were used to determine the hydrogel-forming ability and biodegradation performance of OSA. The results showed that the two adjacent hydroxyl groups of alginate uronic acid units were successfully oxidized to form the aldehyde groups; as the amount of NaIO₄ increased, the OD of OSA gradually increased, the molecular weight decreased, the gelation ability continued to weaken, and degradation performance obviously rose. It is shown that OSA with various ODs could be prepared by regulating the molar ratio of NaIO₄ and sodium alginate (SA), which could greatly broaden the application of OSA-based hydrogel in tissue engineering, controlled drug release, 3D printing, and the biomedical field.

Fabricating Network-Link Acetamiprid-Loading Micelles Based on Dopamine-Functionalized Alginate and Alkyl Polyglucoside To Enhance Folia Deposition and Retention

The development of an eco-friendly nanopesticide formulation can alleviate the problems of low pesticide utilization and environmental pollution. However, the development of green nanopesticide carriers with ideal physical properties and specific bioavailability is still a challenging task at present. In this study, we propose a novel binary additive pesticide carrier system that is a functional polysaccharide-based polymer/surfactant (Alg-DA/APG) to improve the deposition and retention of pesticide droplets. The self-assembled micelle morphology of Alg-DA/APG and its effect on the apparent viscosity were investigated by transmission electron microscopy (TEM) and a Discovery HR-2 rotational rheometer. Surface tension was carried out to investigate the surface activity and critical micelle concentration (CMC) of Alg-DA/APG. The drop impacting experiments exhibited superior antisplash performance of Alg-DA/APG. Furthermore, a binary additive was used as the carrier material and loaded acetamiprid to prepare nanopesticide formulation Ace@Alg-DA/APG. The encapsulation efficiency (EE) and acetamiprid release behavior from Ace@Alg-DA/APG were also studied. Moreover, the dynamic contact angle (DCA) and retention experiment showed that the DCA and wetting radius at 600 s were, respectively, 6.8 ± 2.39° and 4.044 ± 0.0662 mm for the Ace@0.05 wt % Alg-DA/0.05 wt % APG on the banana foliage surface, and its retention rates on foliage surface were up to 74.80% after washing. The novel binary additive as a nanopesticide carrier has the potential to alleviate the problems of low pesticide utilization and environmental pollution in the future.

Enhancing soil aggregation and acetamiprid adsorption by ecofriendly polysaccharides hydrogel based on Ca2+- amphiphilic sodium alginate

Soil aggregation plays an important role in agricultural production activities. However, the structure of soil aggregation is destroyed by the natural environment and unreasonable farming management, resulting in the loss of water, fertilizers and pesticides in soil. At present, hydrogels have been widely reported to promote the formation of soil aggregation. In this paper, amphiphilic calcium alginate (ASA/Ca²⁺) was applied to promote the formation of soil aggregation and enhance pesticide retention. Initially, an ASA was obtained through the one-pot Ugi condensation (a four-component green chemical reaction). Then, ASA/Ca²⁺ hydrogel is prepared by Ca²⁺ cross-linking. The formation of soil aggregation was determined through the Turbiscan Lab Expert stability analyzer, Confocal Laser Scanning Microscope (CLSM), and Transmission Electron Microscope (TEM). And the effect of soil aggregation on acetamiprid environmental behavior was investigated by adsorption kinetics, adsorption isotherms, and leaching. The results shown that the three-dimensional network structure of ASA/Ca²⁺ hydrogel can promote the formation of soil aggregation. Aggregate durability index (ADI) was 0.55 in the presence of ASA/Ca²⁺ hydrogel, indicating that amphiphilic hydrogel can enhance the stability of soil aggregation. The adsorbing capacity of acetamiprid was 1.58 times higher than pure soil, and the release of acetamiprid only about 20% in the presence of ASA/Ca²⁺ hydrogel. These results would be helpful for the formation of soil aggregation and pesticides adsorption on soil aggregation. Thus, ASA/Ca²⁺ hydrogel is likely to improve soil quality, simultaneously it can minimize the mobility of pesticides in the agricultural system.

One-Pot Synthesis of Amphiphilic Biopolymers from Oxidized Alginate and Self-Assembly as a Carrier for Sustained Release of Hydrophobic Drugs

In this paper, we developed an organic solvent-free, eco-friendly, simple and efficient one-pot approach for the preparation of amphiphilic conjugates (Ugi-OSAOcT) by grafting octylamine (OCA) to oxidized sodium alginate (OSA). The optimum reaction parameters that were obtained based on the degree of substitution (DS) of Ugi-OSAOcT were a reaction time of 12 h, a reaction temperature of 25 °C and a molar ratio of 1:2.4:3:3.3 (OSA:OCA:HAc:TOSMIC), respectively. The chemical structure and composition were characterized by Fourier transform infrared spectroscopy (FTIR), ¹H nuclear magnetic resonance (¹H NMR), X-ray diffraction (XRD), thermogravimetry analyser (TGA), gel permeation chromatography (GPC) and elemental analysis (EA). It was found that the Ugi-OSAOcT conjugates with a CMC value in the range of 0.30–0.085 mg/mL could self-assemble into stable and spherical micelles with a particle size of 135.7 ± 2.4–196.5 ± 3.8 nm and negative surface potentials of −32.8 ± 0.4–−38.2 ± 0.8 mV. Furthermore, ibuprofen (IBU), which served as a model poorly water-soluble drug, was successfully incorporated into the Ugi-OSAOcT micelles by dialysis method. The drug loading capacity (%DL) and encapsulation efficiency (%EE) of the IBU-loaded Ugi-OSAOcT micelles (IBU/Ugi-OSAOcT = 3:10) reached as much as 10.9 ± 0.4–14.6 ± 0.3% and 40.8 ± 1.6–57.2 ± 1.3%, respectively. The in vitro release study demonstrated that the IBU-loaded micelles had a sustained and pH-responsive drug release behavior. In addition, the DS of the hydrophobic segment on an OSA backbone was demonstrated to have an important effect on IBU loading and drug release behavior. Finally, the in vitro cytotoxicity assay demonstrated that the Ugi-OSAOcT conjugates exhibited no significant cytotoxicity against RAW 264.7 cells up to 1000 µg/mL. Therefore, the amphiphilic Ugi-OSAOcT conjugates synthesized by the green method exhibited great potential to load hydrophobic drugs, acting as a promising nanocarrier capable of responding to pH for sustained release of hydrophobic drugs.

Biomimetic multilayer polycaprolactone/sodium alginate hydrogel scaffolds loaded with melatonin facilitate tendon regeneration

Tendon injury is one of the most common musculoskeletal diseases in the world, severely challenging the public health care system. Electrospinning technique using polymer materials (i.e. polycaprolactone (PCL)) and hydrogels (i.e. sodium alginate (ALG)) contribute to the development and application of smart composite scaffolds in the tendon tissue engineering by advantageously integrating mechanical properties and biocompatibility. As a potential natural antioxidant, melatonin (MLT) represents the potential to promote tendon repair. Here, we develop an MLT-loaded PCL/ALG composite scaffold that effectively promotes tendon injury repair in vivo and in vitro via a controlled release of MLT, possibly mechanically relying on an antioxidant stress pathway. This biomimetic composite scaffold will be of great significance in the tendon tissue engineering.

High-viscosity Pickering emulsion stabilized by amphiphilic alginate/SiO2 via multiscale methodology for crude oil-spill remediation

The separation of crude oil from oily water and collection of the emulsion constituents has attracted significant attention. We demonstrate that the relationships between inherent dynamic factors and the performance of a Pickering emulsion stabilized by SiO₂ particles with adsorbed hydrophobically modified sodium alginate derivatives (HMSA), a natural pH-sensitive polysaccharide, can be clarified via a multi-scale methodology. Functionalization of the silica surface with HMSA controls particle dispersibility, as verified by turbidity and stability analyses, the zeta potential, and transmission electron microscopy measurements. The interaction mechanism between HMSA and SiO₂ nanoparticles was elucidated by both experimental adsorption measurements and computer simulations, which showed qualitative consistency. The aggregation/disaggregation of HMSA/SiO₂ particles achieved by tuning the pH of the solution facilitated reversible dispersibility/collectability behavior. Overall, a high-viscosity Pickering emulsion system based on particle-particle and droplet-droplet interactions, which can be filtered for the recovery of spilled crude oil, was demonstrated.

In vitro Digestion and Swelling Kinetics of Thymoquinone-Loaded Pickering Emulsions Incorporated in Alginate-Chitosan Hydrogel Beads

The present work aimed to investigate the swelling behavior, in vitro digestion, and release of a hydrophobic bioactive compound, thymoquinone (TQ), loaded in Pickering emulsion incorporated in alginate-chitosan hydrogel beads using a simulated gastrointestinal model. In this study, oil-in-water Pickering emulsions of uniform micron droplet sizes were formulated using 20% red palm olein and 0.5% (w/v) cellulose nanocrystals-soy protein isolate (CNC/SPI) complex followed by encapsulation within beads. FT-IR was used to characterize the bonding between the alginate, chitosan, and Pickering emulsion. 2% (w/v) alginate-1% (w/v) chitosan hydrogel beads were found to be spherical with higher stability against structural deformation. The alginate-chitosan beads displayed excellent stability in simulated gastric fluid (SGF) with a low water uptake of ~19%. The hydrogel beads demonstrated a high swelling degree (85%) with a superior water uptake capacity of ~593% during intestinal digestion in simulated intestinal fluid (SIF). After exposure to SIF, the microstructure transformation was observed, causing erosion and degradation of alginate/chitosan wall materials. The release profile of TQ up to 83% was achieved in intestinal digestion, and the release behavior was dominated by diffusion via the bead swelling process. These results provided useful insight into the design of food-grade colloidal delivery systems using protein-polysaccharide complex-stabilized Pickering emulsions incorporated in alginate-chitosan hydrogel beads.

Esterification of Alginate with Alkyl Bromides of Different Carbon Chain Lengths via the Bimolecular Nucleophilic Substitution Reaction: Synthesis, Characterization, and Controlled Release Performance

To extend the alginate applicability for the sustained release of hydrophobic medicine in drug delivery systems, the alkyl alginate ester derivative (AAD), including hexyl alginate ester derivative (HAD), octyl alginate ester derivative (OAD), decyl alginate ester derivative (DAD), and lauryl alginate ester derivative (LAD), were synthesized using the alkyl bromides with different lengths of carbon chain as the hydrophobic modifiers under homogeneous conditions via the bimolecular nucleophilic substitution (SN2) reaction. Experimental results revealed that the successful grafting of the hydrophobic alkyl groups onto the alginate molecular backbone via the SN2 reaction had weakened and destroyed the intramolecular hydrogen bonds, thus enhancing the molecular flexibility of the alginate, which endowed the AAD with a good amphiphilic property and a critical aggregation concentration (CAC) of 0.48~0.0068 g/L. Therefore, the resultant AAD could form stable spherical self-aggregated micelles with the average hydrodynamic diameter of 285.3~180.5 nm and zeta potential at approximately -44.8~-34.4 mV due to the intra or intermolecular hydrophobic associations. With the increase of the carbon chain length of the hydrophobic side groups, the AAD was more prone to self-aggregation, and therefore was able to achieve the loading and sustained release of hydrophobic ibuprofen. Additionally, the swelling and degradation of AAD microcapsules and the diffusion of the loaded drug jointly controlled the release rate of ibuprofen. Meanwhile, the AAD also displayed low cytotoxicity to the murine macrophage RAW264.7 cells. Thanks to the good amphiphilic property, colloidal interface activity, hydrophobic drug-loading performance, and cytocompatibility, the synthesized AAD exhibited a great potential for the development of hydrophobic pharmaceutical formulations.

The Molecular Structure and Self-Assembly Behavior of Reductive Amination of Oxidized Alginate Derivative for Hydrophobic Drug Delivery

On account of the rigid structure of alginate chains, the oxidation-reductive amination reaction was performed to synthesize the reductive amination of oxidized alginate derivative (RAOA) that was systematically characterized for the development of pharmaceutical formulations. The molecular structure and self-assembly behavior of the resultant RAOA was evaluated by an FT-IR spectrometer, a 1H NMR spectrometer, X-ray diffraction (XRD), thermal gravimetric analysis (TGA), a fluorescence spectrophotometer, rheology, a transmission electron microscope (TEM) and dynamic light scattering (DLS). In addition, the loading and in vitro release of ibuprofen for the RAOA microcapsules prepared by the high-speed shearing method, and the cytotoxicity of the RAOA microcapsules against the murine macrophage RAW264.7 cell were also studied. The experimental results indicated that the hydrophobic octylamine was successfully grafted onto the alginate backbone through the oxidation-reductive amination reaction, which destroyed the intramolecular hydrogen bond of the raw sodium alginate (SA), thereby enhancing its molecular flexibility to achieve the self-assembly performance of RAOA. Consequently, the synthesized RAOA displayed good amphiphilic properties with a critical aggregation concentration (CAC) of 0.43 g/L in NaCl solution, which was significantly lower than that of SA, and formed regular self-assembled micelles with an average hydrodynamic diameter of 277 nm (PDI = 0.19) and a zeta potential of about -69.8 mV. Meanwhile, the drug-loaded RAOA microcapsules had a relatively high encapsulation efficiency (EE) of 87.6 % and good sustained-release properties in comparison to the drug-loaded SA aggregates, indicating the good affinity of RAOA to hydrophobic ibuprofen. The swelling and degradation of RAOA microcapsules and the diffusion of the loaded drug jointly controlled the release rate of ibuprofen. Moreover, it also displayed low cytotoxicity against the RAW264.7 cell, similar to the SA aggregates. In view of the excellent advantages of RAOA, it is expected to become the ideal candidate for hydrophobic drug delivery in the biomedical field.

Fabrication and Evaluation of Alginate/Bacterial Cellulose Nanocrystals-Chitosan-Gelatin Composite Scaffolds

It is common knowledge that pure alginate hydrogel is more likely to have weak mechanical strength, a lack of cell recognition sites, extensive swelling and uncontrolled degradation, and thus be unable to satisfy the demands of the ideal scaffold. To address these problems, we attempted to fabricate alginate/bacterial cellulose nanocrystals-chitosan-gelatin (Alg/BCNs-CS-GT) composite scaffolds using the combined method involving the incorporation of BCNs in the alginate matrix, internal gelation through the hydroxyapatite-d-glucono-δ-lactone (HAP-GDL) complex, and layer-by-layer (LBL) electrostatic assembly of polyelectrolytes. Meanwhile, the effect of various contents of BCNs on the scaffold morphology, porosity, mechanical properties, and swelling and degradation behavior was investigated. The experimental results showed that the fabricated Alg/BCNs-CS-GT composite scaffolds exhibited regular 3D morphologies and well-developed pore structures. With the increase in BCNs content, the pore size of Alg/BCNs-CS-GT composite scaffolds was gradually reduced from 200 μm to 70 μm. Furthermore, BCNs were fully embedded in the alginate matrix through the intermolecular hydrogen bond with alginate. Moreover, the addition of BCNs could effectively control the swelling and biodegradation of the Alg/BCNs-CS-GT composite scaffolds. Furthermore, the in vitro cytotoxicity studies indicated that the porous fiber network of BCNs could fully mimic the extracellular matrix structure, which promoted the adhesion and spreading of MG63 cells and MC3T3-E1 cells on the Alg/BCNs-CS-GT composite scaffolds. In addition, these cells could grow in the 3D-porous structure of composite scaffolds, which exhibited good proliferative viability. Based on the effect of BCNs on the cytocompatibility of composite scaffolds, the optimum BCNs content for the Alg/BCNs-CS-GT composite scaffolds was 0.2% (w/v). On the basis of good merits, such as regular 3D morphology, well-developed pore structure, controlled swelling and biodegradation behavior, and good cytocompatibility, the Alg/BCNs-CS-GT composite scaffolds may exhibit great potential as the ideal scaffold in the bone tissue engineering field.

Formation of Amphiphilic Molecules from the Most Common Marine Polysaccharides, toward a Sustainable Alternative?

Marine polysaccharides are part of the huge seaweeds resources and present many applications for several industries. In order to widen their potential as additives or bioactive compounds, some structural modifications have been studied. Among them, simple hydrophobization reactions have been developed in order to yield to grafted polysaccharides bearing acyl-, aryl-, alkyl-, and alkenyl-groups or fatty acid chains. The resulting polymers are able to present modified physicochemical and/or biological properties of interest in the current pharmaceutical, cosmetics, or food fields. This review covers the chemical structures of the main marine polysaccharides, and then focuses on their structural modifications, and especially on hydrophobization reactions mainly esterification, acylation, alkylation, amidation, or even cross-linking reaction on native hydroxyl-, amine, or carboxylic acid functions. Finally, the question of the necessary requirement for more sustainable processes around these structural modulations of marine polysaccharides is addressed, considering the development of greener technologies applied to traditional polysaccharides.

Alginate modification via click chemistry for biomedical applications

Alginate biopolymers are characterized by favorable properties, of biocompatibility, degradability, and non-toxicity. However, the poor stability properties of alginate have limited its suitability for diverse applications. Recently, click chemistry has generated significant research interest due to its high reaction efficiency, high selectivity for a single product, harmless byproducts, and processing simplicity. Alginate modified using click chemistry enables the production of alginate derivatives with enhanced physical and chemical properties. Herein, we review the employment of click chemistry in the development of alginate-based materials or systems. Various click chemistries were highlighted, including azide and alkyne cycloaddition (e.g. Copper-(I)-catalyzed azide-alkyne cycloaddition (CuAAC), Strain-promoted alkyne-azide cycloaddition (SPAAC)), Diels-Alder reaction (Inverse electron demand Diels-Alder (IEDDA) cycloaddition, Tetrazine-norbornene Diels-Alder reactions), Thiol-ene/yne addition (Free-radical thiol-ene addition click reactions, Thiol-Michael addition click reactions, Thiol-yne addition click reaction), Oxime based click reactions, and other click reactions. Alginate functionalized with click chemistry and its properties were also discussed. The present study shows that click chemistry may be employed in modifying the mechanical strength, biochemical/biological properties of alginate-based materials. Finally, the applications of alginate-based materials in wound dressing, drug delivery, protein delivery, tissue regeneration, and 3D bioprinting were described and the future perspectives of alginates modified with click chemistry, are subsequently presented. This review provides new insights for readers to design structures and expand applications of alginate using click chemistry reactions in a detailed and more rational manner.

Recent Development of Alginate-Based Materials and Their Versatile Functions in Biomedicine, Flexible Electronics, and Environmental Uses

Alginate is a natural polysaccharide that is easily chemically modified or compounded with other components for various types of functionalities. The alginate derivatives are appealing not only because they are biocompatible so that they can be used in biomedicine or tissue engineering but also because of the prospering bioelectronics that require various biomaterials to interface between human tissues and electronics or to serve as electronic components themselves. The study of alginate-based materials, especially hydrogels, have repeatedly found new frontiers over recent years. In this Review, we document the basic properties of alginate, their chemical modification strategies, and the recent development of alginate-based functional composite materials. The newly thrived functions such as ionically conductive hydrogel or 3D or 4D cell culturing matrix are emphasized among other appealing potential applications. We expect that the documentation of relevant information will stimulate scientific efforts to further develop biocompatible electronics or smart materials and to help the research domain better address the medicine, energy, and environmental challenges faced by human societies.

Synthesis and assessment of CTAB and NPE modified organo-montmorillonite for the fabrication of organo-montmorillonite/alginate based hydrophobic pharmaceutical controlled-release formulation

The research goal of the present study was to develop a carrier for loading and controlled -release of the hydrophobic drug with the combined use of organo-montmorillonite (OMMT) and alginate. The OMMT was synthesized through the intercalation modification of sodium montmorillonite (Na-MMT) with cationic cetyltrimethylammonium bromide (CTAB), nonionic nonylphenol polyoxyethylene ether (NPE) and the mixture of them via simple and convenient wet ball-milling method. Furthermore, the organo-montmorillonite/alginate (OMMT/Alg) composite hydrogel beads with slow and controlled release properties were constructed by using alginate as a coating material under the exogenous cross-linking of calcium ions. The physical and chemical properties of OMMT were comparatively evaluated by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), transmission electron microscopy (TEM), dynamic light scattering (DLS), thermogravimetric analyzer (TGA), BET-specific surface area measurements, and drug adsorption experiments. Experimental results showed that the presence of CTAB was able to facilitate the intercalation of CTAB/NPE into Na-MMT through the cation exchange reaction. And the cationic CTAB and nonionic NPE were adsorbed or intercalated into the MMT lamellar structure through the wet ball-milling process, which could change the hydrophilic nature of Na-MMT and improve its affinity to the hydrophobic drug molecules. In addition, the OMMT/Alg composite hydrogel beads displayed superior sustained-release properties than Na-MMT/Alg, mainly ascribed to the good affinity of OMMT to hydrophobic drug that retarded the drug diffusion. In particular, CTA/NPE-MMT/Alg with the highest loading capacity (LC) and encapsulation efficiency (EE) revealed the optimal controlled performance for the release of hydrophobic ibuprofen. The release followed the Korsmeyer-Peppas model suggested non-Fickian diffusion release mechanism. Based on the high drug loading capacity and excellent controlled drug release properties, the CTA/NPE-MMT/Alg incorporating hydrophobic drugs into hydrophilic matrices could be a highly promising material for use in hydrophobic drug delivery.