Biodegradable polymer blends based on corn starch and thermoplastic chitosan processed by extrusion

Improving the behavior of thermoplastic starch with the addition of gum Arabic: Antibacterial, mechanical properties and biodegradability

The incorporation of different amounts of Gum Arabic (GA) in thermoplastic starch (TPS) obtained by extrusion and subsequent thermocompression has been studied. The sheets have been characterized by means of XRD, FTIR, TGA, moisture content, SEM, mechanical properties, antimicrobial activity and biodegradability via composting. The FTIR analysis of the sheets shows the presence of ester groups, while the TGA shows the presence of new processes and a residue much higher than expected is obtained. No changes in crystallinity are observed by XRD. The inclusion of GA confers antimicrobial properties to thermoplastic starch against the Gram + and Gram - bacteria studied even at the smaller concentrations. For a low GA content (0.5 and 1 g GA/100 g TPS) a homogeneous material is observed by SEM, as well as an important increase in tensile strength, modulus and deformation at break, which are very interesting properties facing the applicability of this material in single use plastics which are in contact with food or other consumable goods. At higher contents of GA, hollows and cracks appear in the material, compromising the mechanical properties. In all cases, the inclusion of GA delays the biodegradation process in soil, which can be related to its antibacterial capacity and especially in case of GA concentrations of 2 and 5 g/100 g of TPS with lower humidity of these TPS sheets.

Synthesis of novel chitosan/sodium hyaluronate/iridium hydrogel nanocomposite for wound healing application

A novel chitosan/sodium hyaluronate/iridium (CHI/SH/Ir) hydrogel nanocomposite with a unique microstructure containing vertically aligned pores is fabricated via an electrophoresis technique. The formation of orderly vertical pores in CHI/SH/Ir hydrogel nanocomposite is due to the confinement of hydrogen bubbles produced from the water electrolysis during electrophoresis that limits their lateral movement and coalescence. In a wet state, the diameter for the vertical pores is 600-700 μm. With a thickness of 500 μm, the CHI/SH/Ir hydrogel nanocomposite exhibits a porosity of 76.7 % and a water uptake of 350 %. Its tensile strength is almost doubled to 8.7 MPa, as compared to that of counterpart without the addition of iridium. In CHI/SH/Ir hydrogel nanocomposite, the iridium nanoparticles are homogeneously distributed with an average size of 3 nm. The CHI/SH/Ir electrophoresis suspension exhibits a negligible cytotoxicity. In cell migration test using the human keratinocytes HaCaT cells, the CHI/SH/Ir hydrogel nanocomposite reveals a relative migration of 122.15 ± 9.02 % (p < 0.001) as compared to the blank sample. The presence of vertically aligned pores with the use of SH and iridium nanoparticles indicates a promising opportunity in wound healing application.

Biodegradable plastic formulated from chitosan of Aristeus antennatus shells with castor oil as a plasticizer agent and starch as a filling substrate

Biodegradable plastics are those subjected easily to a degradation process, in which they can be decomposed after disposal in the environment through microbial activity. 30 bioplastic film formulations based only on chitosan film were used in the current investigation as a positive control together with chitosan film recovered from chitin-waste of locally obtained Aristeus antennatus. Additionally, castor oil was used as a plasticizer. While the yield of chitosan was 18% with 7.65% moisture content and 32.27% ash in the shells, the isolated chitin had a degree of deacetylation (DD) of 86%. The synthesized bioplastic films were characterized via numerous criteria. Firstly, the swelling capacity of these biofilms recorded relatively high percentages compared to polypropylene as synthetic plastic. Noticeably, the FTIR profiles, besides DSC, TGA, and XRD, confirmed the acceptable characteristics of these biofilms. In addition, their SEM illustrated the homogeneity and continuity with a few straps of the chitosan film and showed the homogeneous mixes of chitosan and castor oil with 5 and 20%. Moreover, data detected the antibacterial activity of different bioplastic formulas against some common bacterial pathogens (Enterococcus feacalis, Kelbsiella pnumina, Bacillus subtilis, and Pseudomonas aeruginosa). Amazingly, our bioplastic films have conducted potent antimicrobial activities. So, they may be promising in such a direction. Further, the biodegradability efficacy of bioplastic films formed was proved in numerous environments for several weeks of incubation. However, all bioplastic films decreased in their weights and changed in their colors, while polypropylene, was very constant all the time. The current findings suggest that our biofilms may be promising for many applications, especially in the field of food package protecting the food, and preventing microbial contamination, consequently, it may help in extending the shelf life of products.

Microplastics from agricultural mulch films: Biodegradation and ecotoxicity in freshwater systems

The application of bio-based biodegradable mulch films in agriculture has raised environmental concerns regarding their potential impacts on adjacent freshwater ecosystems. This study investigated the biodegradation of microplastics derived from a bio-based biodegradable mulch (bio-MPs) and its acute and chronic ecotoxicity considering relevant scenarios (up to 200 and 250 mg/kg of sediment, using pristine and/or UV-aged particles), using the fungus Penicillium brevicompactum and the dipteran Chironomus riparius as model organisms, respectively, due to their ecological relevance in freshwater environments. Fourier-transform infrared spectroscopy analysis suggested changes in the fungus's carbohydrate reserves and bio-MP degradation through the appearance of low molecular weight esters throughout a 28 day biodegradation test. In a short-term exposure (48 h), C. riparius larvae exposed to pristine or UV-aged bio-MPs had up to 2 particles in their gut. Exposure to pristine bio-MPs decreased larval aerobic metabolism (<20 %) and increased neurotransmission (>15 %), whereas exposure to UV-aged bio-MPs activated larval aerobic metabolism (>20 %) and increased antioxidant defences (catalase activity by >30 % and glutathione-s-transferase by >20 %) and neurotransmission (>30 %). Longer-term (28-d) exposure to UV-aged bio-MPs did not affect larval survival and growth nor the dipteran's emergence but increased male numbers (>30 %) at higher concentrations. This study suggests that the selected agricultural bio-based mulch film is prone to biodegradation by a naturally occurring fungus. However, there is a potential for endocrine disruption in the case of prolonged exposures to UV-aged microplastics. This study emphasises the importance of further research to elucidate the potential ecological effects of these plastic products, to ensure effective management practices, and to establish new regulations governing their use.

Treatment and mechanism for hot melting starch by reducing the molecular chain winding and crystallinity

Unlike thermoplastic petroleum-based materials, starch-based materials rely on aqueous systems but are incapable of hot melting, resulting in low processing efficiency and limited large-scale industrial applications. In this study, the combination of α-amylase liquefaction and urea plasticization was used for the first time to obtain enzymatic thermoplastic starch (ETPS) for hot melting by changing the molecular chain of starch. ETPS showed an apparent hot melting phenomenon when heated below 200 °C. Differential scanning calorimetry revealed that heat absorption peaks were obviously reduced, and the hot melting phenomenon occurred easily depending on the combination of enzymatic hydrolysis and plasticization. Dynamic mechanical analysis indicated that the combined modification effectively increased the number of freely movable chains. The red shift of -OH stretching vibration peaks indicated the formation of strengthened hydrogen bonds in ETPS. X-ray diffraction showed that the crystallinity of ETPS was reduced to 5.68 %, effectively reducing the regenerative phenomenon. Gel permeation chromatography revealed that the molecular weight of ETPS decreased, and the entanglements between molecular chains were reduced. A tensile test showed that the elongation at break of ETPS was as high as 235.29 %, which was much higher than those of enzymatic hydrolysis starch and thermoplastic starch.

Mechanical properties and water resistance improvement of thermoplastic modified starch, carboxymethyl cellulose, and zinc oxide nanometal particles by reactive blending

Novel biodegradable thermoplastic starch (TPS) with high mechanical properties and water resistance was developed using reactive blending technique. Effect of zinc oxide (ZnO) addition to TPS properties and reaction was investigated. Thermoplastic modified starch (TPMS) was prepared by melt-mixing modified starch with glycerol 70/30%wt/wt. Carboxy methyl cellulose (CMC) 5%wt was incorporated with modified starch, glycerol, and zinc oxide (ZnO) 0-5 %wt. Fourier-transform infrared (FTIR) spectroscopy analysis confirmed the formation of the carboxyl anion (OZn) between the -COO- of CMC and the free Zn+ ion of ZnO. The tensile strength of the TPMS/CMC/ZnO blend increased 7 time with ZnO 5 % (14 MPa) addition compared to TPMS (2 MPa). The color (∆E) of TPMS/CMC/ZnO differed notably at high ZnO concentrations (1-5 %wt). The TPMS/CMC blend displayed a smooth fracture surface due to the miscibility of the materials. Small particles of ZnO dispersed finely in the TPMS matrix and increased the interfacial tension and water contact angle of the blends. The miscibility of TPS with CMC and the occurrence of ionic interactions of -COO- of CMC and -OH of starch with the Zn+ ion as physical crosslinking were indicated to improve the mechanical properties and water resistance of the blends.

Natural Polymer-Based Hydrogels: From Polymer to Biomedical Applications

Hydrogels prepared from natural polymer have attracted extensive attention in biomedical fields such as drug delivery, wound healing, and regenerative medicine due to their good biocompatibility, degradability, and flexibility. This review outlines the commonly used natural polymer in hydrogel preparation, including cellulose, chitosan, collagen/gelatin, alginate, hyaluronic acid, starch, guar gum, agarose, and dextran. The polymeric structure and process/synthesis of natural polymers are illustrated, and natural polymer-based hydrogels including the hydrogel formation and properties are elaborated. Subsequently, the biomedical applications of hydrogels based on natural polymer in drug delivery, tissue regeneration, wound healing, and other biomedical fields are summarized. Finally, the future perspectives of natural polymers and hydrogels based on them are discussed. For natural polymers, novel technologies such as enzymatic and biological methods have been developed to improve their structural properties, and the development of new natural-based polymers or natural polymer derivatives with high performance is still very important and challenging. For natural polymer-based hydrogels, novel hydrogel materials, like double-network hydrogel, multifunctional composite hydrogels, and hydrogel microrobots have been designed to meet the advanced requirements in biomedical applications, and new strategies such as dual-cross-linking, microfluidic chip, micropatterning, and 3D/4D bioprinting have been explored to fabricate advanced hydrogel materials with designed properties for biomedical applications. Overall, natural polymeric hydrogels have attracted increasing interest in biomedical applications, and the development of novel natural polymer-based materials and new strategies/methods for hydrogel fabrication are highly desirable and still challenging.

Replacing Harmful Flame Retardants with Biodegradable Starch-Based Materials in Polyethylene Formulations

The addition of toxic flame retardants to commercially available polymers is often required for safety reasons due to the high flammability of these materials. In this work, the preparation and incorporation of efficient biodegradable starch-based flame retardants into a low-density polyethylene (LDPE) matrix was investigated. Thermoplastic starch was first obtained by plasticizing starch with glycerol/water or glycerol/water/choline phytate to obtain TPS-G and TPS-G-CPA, respectively. Various LDPE/TPS blends were prepared by means of melt blending using polyethylene graft maleic anhydride as a compatibilizer and by varying the content of TPS and a halogenated commercial flame retardant. By replacing 38% and 76% of the harmful commercial flame retardant with safe TPS-G-CPA and TPS-G, respectively, blends with promising fire behavior were obtained, while the limiting oxygen index (LOI ≈ 28%) remained the same. The presence of choline phytate improved both the charring ability and fire retardancy of starch and resulted in a 43% reduction in fire growth index compared to the blend with commercial flame retardant only, as confirmed by means of cone calorimetry. Standard UL 94 vertical tests showed that blends containing TPS exhibited dripping behavior (rated V2), while those with commercial flame retardant were rated V0. Overall, this work demonstrates the potential of starch as a natural flame retardant that could reduce the cost and increase the safety of polymer-based materials.

The Durable Chitosan Functionalization of Cellulosic Fabrics

In this work, the durability of chitosan functionalization of cellulosic textile substrates, cotton and cotton/polyester blended fabrics, was studied. Chitosan is a naturally occurring biopolymer that can be produced inexpensively. It should be dissolved in an acidic solution to activate its antimicrobial and other properties, i.e., good biocompatibility, bioabsorbability, wound healing, hemostatic, anti-infective, antibacterial, non-toxic, and adsorptive properties. The application of chitosan to textile products has been researched to achieve antimicrobial properties, but the durability, after several maintenance cycles, has not. Chitosan functionalization was carried out using maleic acid (MA) and 1,2,3,4-butanetetracarboxylic acid (BTCA) as crosslinking and chitosan-activating agents and sodium hypophosphite monohydrate as a catalyst. To determine durability, the fabrics were subjected to 10 maintenance cycles according to ISO 6330:2012 using Reference detergent 3 and drying according to Procedure F. The properties were monitored after the 3rd and 10th cycles. The crosslinking ability of chitosan with cellulosic fabrics was monitored by Fourier infrared spectrometry using the ATR technique (FTIR-ATR). Changes in mechanical properties, whiteness and yellowing, and antimicrobial properties were determined using standard methods. Compared to maleic acid, BTCA proved to be a better crosslinking agent for chitosan.

Reactive Blending of Modified Thermoplastic Starch Chlorhexidine Gluconate and Poly(butylene succinate) Blending with Epoxy Compatibilizer

Biodegradable starch-based polymers were developed by melt-blending modified thermoplastic starch (MTPS) with poly(butylene succinate) (PBS) blended with epoxy resin (Er). A modified thermoplastic starch blend with chlorhexidine gluconate (MTPSCh) was prepared by melt-blending cassava starch with glycerol and chlorhexidine gluconate (CHG) 1.0% wt. The Er was melt-blended with PBS (PBSE) at concentrations of 0.50%, 1.0%, 2.5%, and 5.0% (wt%/wt%). The mechanical properties, water resistance, and morphology of the MTPSCh/PBSE blends were investigated. The MTPSCh/PBSE2.5% blend showed an improvement in tensile strength (8.1 MPa) and elongation at break (86%) compared to the TPSCh/PBS blend (2.6 MPa and 53%, respectively). In addition, water contact angle measurements indicated an increase in the hydrophobicity of the MTPSCh/PBSE blends. Thermogravimetric analysis showed an improvement in thermal stability when PBS was added to the MTPSCh blends. Fourier transform infrared spectroscopy data confirmed a new reaction between the amino groups of CHG in MTPSCh and the epoxy groups of Er in PBSE, which improved the interfacial adhesion of the MTPSCh/PBSE blends. This reaction improved the mechanical properties, water resistance, morphology, and thermal stability of the TPSCh/PBSE blends.

Thermoplastic starch (TPS)-based composite films for wastewater treatment: synthesis and fundamental characterization

Modification of starch is a potential basic research aiming to improve its water barrier properties. The general purpose of this study is to manufacture cross-linked iodinated starch citrate (ISC) with a degree of substitution (DS) ≈ 0.1 by modifying native corn starch with citric acid in the presence of iodine as an oxidizing agent. Thermoplastic starch (TPS) was generated with urea as a plasticizer and blended with various concentrations of ISC of (2, 4, 6%) (wt/wt) to obtain (UTPS/ISC₂, UTPS/ISC₄, and UTPS/ISC₆). Nanocomposite film was formed from UTPS/ISC₂ in presence of stabilized iodinated cellulose nanocrystals UTPS/ISC₂/SICNCs via gelatinization at a temperature of 80ºC. Water solubility and water vapor release were studied amongst the water barrier features. The fabricated starch-based composite films were evaluated utilizing Fourier Transform Infrared Spectroscopy (FTIR), Scanning Electronic Microscope analysis (SEM), surface area, and tensile measurements. The adsorption of crystal violet (CV) dye onto produced samples was examined in an aqueous solution. The findings revealed that the UTPS/ISC₂/ISCNCs has 83% crystal violet elimination effectiveness. Moreover, the adsorption isotherms were assessed and figured out to vary in the order of Langmuir > Temkin > Freundlich > Dubinin-Radushkevich.

Starch-Based Polymer Materials as Advanced Adsorbents for Sustainable Water Treatment: Current Status, Challenges, and Future Perspectives

Over the past three decades, chemical and biological water contamination has become a major concern, particularly in the industrialized world. Heavy metals, aromatic compounds, and dyes are among the harmful substances that contribute to water pollution, which jeopardies the human health. For this reason, it is of the utmost importance to locate methods for the cleanup of wastewater that are not genuinely effective. Owing to its non-toxicity, biodegradability, and biocompatibility, starch is a naturally occurring polysaccharide that scientists are looking into as a possible environmentally friendly material for sustainable water remediation. Starch could exhibit significant adsorption capabilities towards pollutants with the substitution of amide, amino, carboxyl, and other functional groups for hydroxyl groups. Starch derivatives may effectively remove contaminants such as oil, organic solvents, pesticides, heavy metals, dyes, and pharmaceutical pollutants by employing adsorption techniques at a rate greater than 90%. The maximal adsorption capacities of starch-based adsorbents for oil and organic solvents, pesticides, heavy metal ions, dyes, and pharmaceuticals are 13,000, 66, 2000, 25,000, and 782 mg/g, respectively. Although starch-based adsorbents have demonstrated a promising future for environmental wastewater treatment, additional research is required to optimize the technique before the starch-based adsorbent can be used in large-scale in situ wastewater treatment.

Improvements of thermal and mechanical properties of achira starch/chitosan/clay nanocomposite films

Thermoplastic biofilms were developed from achira starch, chitosan and nanoclays using the solvent-casting method. To obtain the filmogenic solutions, different sonication times (0, 10, 20 and 30 min) were considered in order to evaluate the incidence of this parameter on the chemical and physico-mechanical properties of the bionanocomposite films. The chemical analysis using FTIR spectroscopy showed strong intermolecular interactions between the components with increasing sonication times. The results for tensile strength and elongation were satisfactory for films with 20 min of sonication with increases of 154% and 161%, respectively. Morphological analysis showed greater homogeneity, while thermal analysis showed that sonication favoured the plasticization process and thus, the production of homogeneous materials. The water absorption and wettability tests showed less hydrophilic materials allowing these new materials to be considered for use as coatings or packaging for the food sector.

Toward a Circular Bioeconomy: Development of Pineapple Stem Starch Composite as a Plastic-Sheet Substitute for Single-Use Applications

Plastic waste poses a significant challenge for the environment, particularly smaller plastic products that are often difficult to recycle or collect. In this study, we developed a fully biodegradable composite material from pineapple field waste that is suitable for small-sized plastic products that are difficult to recycle, such as bread clips. We utilized starch from waste pineapple stems, which is high in amylose content, as the matrix, and added glycerol and calcium carbonate as the plasticizer and filler, respectively, to improve the material's moldability and hardness. We varied the amounts of glycerol (20-50% by weight) and calcium carbonate (0-30 wt.%) to produce composite samples with a wide range of mechanical properties. The tensile moduli were in the range of 45-1100 MPa, with tensile strengths of 2-17 MPa and an elongation at break of 10-50%. The resulting materials exhibited good water resistance and had lower water absorption (~30-60%) than other types of starch-based materials. Soil burial tests showed that the material completely disintegrated into particles smaller than 1 mm within 14 days. We also created a bread clip prototype to test the material's ability to hold a filled bag tightly. The obtained results demonstrate the potential of using pineapple stem starch as a sustainable alternative to petroleum-based and biobased synthetic materials in small-sized plastic products while promoting a circular bioeconomy.

Chitosan-Based Polymer Blends for Drug Delivery Systems

Polymers have been widely used for the development of drug delivery systems accommodating the regulated release of therapeutic agents in consistent doses over a long period, cyclic dosing, and the adjustable release of both hydrophobic and hydrophilic drugs. Nowadays, polymer blends are increasingly employed in drug development as they generate more promising results when compared to those of homopolymers. This review article describes the recent research efforts focusing on the utilization of chitosan blends with other polymers in an attempt to enhance the properties of chitosan. Furthermore, the various applications of chitosan blends in drug delivery are thoroughly discussed herein. The literature from the past ten years was collected using various search engines such as ScienceDirect, J-Gate, Google Scholar, PubMed, and research data were compiled according to the various novel carrier systems. Nanocarriers made from chitosan and chitosan derivatives have a positive surface charge, which allows for control of the rate, duration, and location of drug release in the body, and can increase the safety and efficacy of the delivery system. Recently developed nanocarriers using chitosan blends have been shown to be cost-effective, more efficacious, and prolonged release carriers that can be incorporated into suitable dosage forms.

Effect of branched polyethyleneimine and citric acid on the structural, physical and antibacterial properties of corn starch/chitosan films

To improve the antibacterial and physical properties of corn starch/chitosan films effectively, starch/chitosan/polyethyleneimine (PEI) blend films crosslinked by citric acid (labeled SCPC) with different contents (2.5 %, 5.0 %, 7.5 % and 10.0 %) were prepared by the solution casting method. The films were characterized in detail. The results showed that the addition of 3.75 % PEI improved the tensile strength and elongation at break of the starch/chitosan film simultaneously, but the thermal stability decreased. After CA was incorporated, the tensile strength and thermal stability of the films were enhanced significantly. FTIR, XRD, and ¹H NMR analyses revealed strong interactions among CA, PEI and starch-chitosan. All films showed smooth and homogenous fragile cross-sections. The water vapor permeability of the film decreased overall after PEI and CA addition. Moisture uptake (MU) accelerated after PEI addition, but the balanced MU was reduced by CA cross-linking. All films showed an inhibitory effect on E. coli and S. aureus, and CA incorporation significantly improved the inhibition ability of the film. The SCPC film with 3.75 % PEI and 5.0 % CA addition has the best comprehensive properties, which endowed its application in the bioactive packaging field.

Active microbial communities during biodegradation of biodegradable plastics by mesophilic and thermophilic anaerobic digestion

Biodegradable plastics, if they are not properly managed at their end-of-life, can have the same hazardous environmental consequences as conventional plastics. This study investigates the treatment of the main biodegradable plastics under mesophilic and thermophilic anaerobic digestion using biochemical methane potential test and the microorganisms involved in the process using amplicon sequencing of the 16 S rRNA. Here we showed that, only PHB and TPS undergone important and rapid biodegradation under mesophilic condition (38 °C). By contrast, PCL and PLA exhibited very low biodegradation rate as 500 days were required to reach the ultimate methane yield. Little or no degradation occurred for PBAT and PBS at 38 °C. Under thermophilic conditions (58 °C), TPS, PHB, and PLA reached high levels of biodegradation in a relatively short period (&lt; 100 d). While PBS, PBAT, and PCL could not be converted into methane at 58 °C. PHB degraders (Enterobacter and Cupriavidus) and lactate-utilizing bacteria (Moorella and Tepidimicrobium) appeared to play an important role in the PHB and PLA degradation, respectively. This work not only provides crucial data on the anaerobic digestion of the main biodegradable plastics but also enriches the understanding of the microorganisms involved in this process, which are of great importance for future development of the treatment of biodegradable plastics in anaerobic digestion systems.

Selected Biopolymers' Processing and Their Applications: A Review

Petroleum-based polymers are used in a multitude of products in the commercial world, but their high degree of contamination and non-biodegradability make them unattractive. The development and use of polymers derived from nature offer a solution to achieve an environmentally friendly and green alternative and reduce waste derived from plastics. This review focuses on showing an overview of the most widespread production methods for the main biopolymers. The parameters affecting the development of the technique, the most suitable biopolymers, and the main applications are included. The most studied biopolymers are those derived from polysaccharides and proteins. These biopolymers are subjected to production methods that improve their properties and modify their chemical structure. Process factors such as temperature, humidity, solvents used, or processing time must be considered. Among the most studied production techniques are solvent casting, coating, electrospinning, 3D printing, compression molding, and graft copolymerization. After undergoing these production techniques, biopolymers are applied in many fields such as biomedicine, pharmaceuticals, food packaging, scaffold engineering, and others.

Polysaccharides for Biodegradable Packaging Materials: Past, Present, and Future (Brief Review)

The ecological problems emerging due to accumulation of non-biodegradable plastics are becoming more and more urgent. This problem can be solved by the development of biodegradable materials which will replace the non-biodegradable ones. Among numerous approaches in this field, there is one proposing the use of polysaccharide-based materials. These polymers are biodegradable, non-toxic, and obtained from renewable resources. This review opens discussion about the application of polysaccharides for the creation of biodegradable packaging materials. There are numerous investigations developing new formulations using cross-linking of polymers, mixing with inorganic (metals, metal oxides, clays) and organic (dyes, essential oils, extracts) compounds. The main emphasis in the present work is made on development of the polymer blends consisting of cellulose, starch, chitin, chitosan, pectin, alginate, carrageenan with some synthetic polymers, polymers of natural origin, and essential oils.

Charged-cellulose nanofibrils as a nutrient carrier in biodegradable polymers for enhanced efficiency fertilizers

An enhanced efficiency fertilizer (EEF) is essential for sustainable agriculture, and here, we evaluated cellulose nanofibrils (CNF) as a nutrient carrier dispersed in biodegradable polymeric matrices. CNF were functionalized with negative (CNF-) and positive (CNF+) charges to improve (i) the CNF-nutrient and (ii) the CNF-polymeric matrix interactions. The CNF encapsulated the KNO3 nutrient by spray drying (microcapsules) and then inserted into a poly (hydroxybutyrate)/starch-based matrix by melt-compounding (tablets). These materials were morphologically, structurally, and thermally characterized before and after biodegradation. Nutrient release profiles showed the microcapsules released the nutrients for up to 1 h, while the tablets did for 8 h in water and over 80 days in soil. Tablets with CNF- released NO3- faster than K+, and those with CNF+ behaved inversely. Besides, the biodegradation efficiencies were up to 75 % in 120 days. The CNF charges affected nutrient release and the matrix biodegradation, ensuring the matrices were harmless to the environment.

Novel and Facile Synthesis of Biodegradable Plastic Films from Cornmeal by Using the Microwave Polymerization Technique

Millions of tons of plastic are produced annually, but a major portion of plastic waste remains unrecycled. The uncycled plastic ultimately becomes a major source of solid trash and releases a variety of chemicals into our environment which can adversely affect the human health and marine life. In this study, a novel approach has been opted to synthesize a biodegradable plastic by using the microwave polymerization technique. In this novel approach, raw material (cornmeal), plasticizer (glycerin), and additive (vinegar) have been combined together to fabricate biodegradable plastic films from the microwave polymerization method. A number of rheological properties such as shear stress (Pa), shear rate (1/s), strain, and viscosity (Pa.s) of newly synthesized plastic were studied. These properties confirmed the presence of a shear thinning effect in the biodegradable plastic films on the basis of flow behavior of cornmeal. In order to check the water uptake ability and biodegradability of the cornmeal-based plastic films, water uptake and biodegradation tests were carried out. The fabricated films were neat, thin, and chewable and demonstrate promising characteristics. Therefore, these synthesized films can potentially become a suitable candidate in the packaging industry.

Highly Stable Europium(III) Tetrahedral (Eu4L4)(phen)4 Cage: Structure, Luminescence Properties, and Cellular Imaging

Luminescent lanthanide cages have many potential applications in guest recognition, sensing, magnetic resonance imaging (MRI), and bioimaging. However, these polynuclear lanthanide assemblies' poor stability, dispersity, and luminescence properties have significantly constrained their practical applications. Furthermore, it is still a huge challenge to simultaneously synthesize and design lanthanide organic polyhedra with high stability and quantum yield. Herein, we demonstrate a simple and robust strategy to improve the rigidity, chemical stability, and luminescence of an Eu(III) tetrahedral cage by introducing the conjugated planar auxiliary phen ligand. The self-assembled tetrahedral cage, (Eu₄L₄)(phen)₄ [L = (4,4',4″-tris(4,4,4-trifluoro-1,3-dioxobutyl)-triphenylamine), phen = 1,10-phenanthroline], exhibited characteristic luminescence of Eu³⁺ ions with high quantum yield (41%) and long lifetime (131 μs) in toluene (1.0 × 10^-6 M). Moreover, the Eu(III) cage was stable in water and even in an aqueous solution with a pH range of 1-14. 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay and cellular imaging revealed that the Pluronic F127-coated hybrid material, (Eu₄L₄)(phen)₄@F127, exhibited low cytotoxicity, good biocompatibility, and cellular imaging ability, which may inspire more insights into the development of lanthanide organic polyhedra (LOPs) for potential biomedical applications.

A shear-thickening colloidal electrolyte for aqueous zinc-ion batteries with resistance on impact

A conventional aqueous electrolyte is a crucial component of zinc-ion batteries providing an ion conductive medium. However, the monofunction of a liquid electrolyte cannot bear any external load. With regard to applications in electric vehicles and stationary energy storage devices, complicated battery packing materials are required to improve the mechanical properties, resulting in reduced energy or power densities from the perspective of the entire device. In this work, an electrolyte suspension combining both fluid-like and solid-like performances was developed for rechargeable zinc-ion batteries. Cornstarch water suspension is utilized in the electrolyte design forming a shear-thickening electrolyte with impact resistance ability. The formed electrolyte becomes rigid at a high shear rate. In other words, under a sudden impact, a battery with this shear-thickening electrolyte could offer additional load bearing avoiding short-circuiting and improving safety. Although an additional functionality, namely impact resistance, was added to the electrolyte, the as-prepared electrolyte still performs with comparable electrochemical performances for which it exhibits a superior ionic conductivity of 3.9 × 10^-3 S cm^-1 and Zn²⁺ transference number. This electrolyte even suppresses side-effects on the zinc anode, exhibiting a lower voltage gap in the symmetric cell compared to the aqueous electrolyte. The integrated full cell also delivered a specific capacity of 255 mA h g^-1 with commercial MnO₂ as the cathode at a current density of 0.1 A g^-1.

Histological Evaluation of Cassava Starch/Chicken Gelatin Membranes

The use of biopolymers for tissue engineering has recently gained attention due to the need for safer and highly compatible materials. Starch is one of the most used biopolymers for membrane preparation. However, incorporating other polymers into starch membranes introduces improvements, such as better thermal and mechanical resistance and increased water affinity, as we reported in our previous work. There are few reports in the literature on the biocompatibility of starch/chicken gelatin composites. We assessed the in vivo biocompatibility of the five composites (T1–T5) cassava starch/gelatin membranes with subdermal implantations in biomodels at 30, 60, and 90 days. The FT-IR spectroscopy analysis demonstrated the main functional groups for starch and chicken gelatin. At the same time, the thermal study exhibited an increase in thermal resistance for T3 and T4, with a remaining mass (~15 wt.%) at 800 °C. The microstructure analysis for the T2–T4 demonstrated evident roughness changes with porosity presence due to starch and gelatin mixture. The decrease in the starch content in the composites also decreased the gelatinization heats for T3 and T4 (195.67, 196.40 J/g, respectively). Finally, the implantation results demonstrated that the formulations exhibited differences in the degradation and resorption capacities according to the starch content, which is easily degraded by amylases. However, the histological results showed that the samples demonstrated almost complete reabsorption without a severe immune response, indicating a high in vivo biocompatibility. These results show that the cassava starch/chicken gelatin composites are promising membrane materials for tissue engineering applications.

Effect of sugarcane bagasse on thermal and mechanical properties of thermoplastic cassava starch/beeswax composites

The demand for biodegradable material has been an important issue, especially in food packaging applications. Among many biodegradable materials, starch biopolymer has been recognised as a completely biodegradable material that can be produced from various plants. It is one of the richest resources that are renewable, biodegradable, and available at low cost. However, starch biopolymers are often associated with poor mechanical properties. Hence, the main objective of this study is to evaluate the mechanical and thermal characteristics of sugarcane bagasse fibre (SBF) reinforced thermoplastic cassava starch (TPCS), which was prior modified with beeswax (BW). It was found that the mechanical properties such as tensile, flexural, and impact strength have improved significantly with the incorporation of SBF loading into the TPCS/BW matrix. The highest tensile strength (12.2 MPa) and modulus (2222.6 MPa) were exhibit by sample with 20 wt% SBF loading and further increment of fibre led to decrease in the strength of the materials. The thermal properties showed that higher SBF loading resulted in improved thermal stability of the material, i.e., higher glass transition and melting temperature than the polymer matrix. Overall, SBF has shown good potential as a reinforcing material which is able to improve the functional characteristics of TPCS/BW as a new potential biodegradable material.

Vapor Barrier Properties of Cold Plasma Treated Corn Starch Films

The development and efficient production of effective bioplastics is a hot topic, required to face up to the issue of the difficult disposal of plastics derived from oil. Among the different natural sources of bioplastics, starch is one of the most promising. However, for most applications, the proper mastering of the surface properties of bioplastic is necessary. We report about the surface modification of extruded corn starch films by means of cold plasma based on helium (He) and hexamethyldisiloxane (HMDSO). The differently treated surfaces were functionally characterized in wettability and water absorption. The nanoscale morphology was assessed by scanning electron microscopy and atomic force microscopy. The obtained images were analyzed by advanced figures describing both texture and amplitude parameters, including fractal behavior. The combined treatment (He/HMDSO) resulted in more homogeneous films with smaller, better-distributed grains compared to the case wherein He was not used. Despite the different morphologies observed, starch coated by HMDSO alone and by He/HMDSO presented similar hydrophobic character, with contact angles higher than 110°. Plasma treatment with HMDSO and He/HMDSO resulted in a significant reduction of absorbed water content without reduction of water vapor permeability. The nanotexture of the films did not present statistically significant differences, in terms of spatial complexities, dominant spatial frequencies, homogeneous void distribution, and surface percolation.

Are mulch biofilms used in agriculture an environmentally friendly solution? - An insight into their biodegradability and ecotoxicity using key organisms in soil ecosystems

Biobased and biodegradable plastic mulch films (aka, mulch biofilm) have emerged as a sustainable alternative to conventional plastic mulch films in agriculture, promising to reduce soil contamination with plastic residues through in situ biodegradation. However, current standards certifying biodegradable plastics cannot predict biodegradability in natural settings. The scarce studies considering the possible biodegradation and ecotoxicity of mulch biofilms in soil systems question the environmental friendliness of these alternative options. This study assessed the biodegradation of a commercially available mulch biofilm by the soil-dwelling fungus Penicillium brevicompactum (in solid culture media and soil for 15 and 28 days, respectively), and the ecotoxicological effects of mulch biofilm microplastics on the earthworm Eisenia andrei (pristine or UV-weathered, at 0.125-0.250-0.500 g/kg). Results (from microplastics' mass loss, microscopy, and FTIR spectroscopy) suggest that the presence of P. brevicompactum promotes mulch biofilm's biodegradation. Exposure to environmental concentrations of pristine biofilm microplastics (and its ingestion) increased earthworms' sensitivity to touch, induced physiological alterations, decreased energy reserves, and decreased their reproduction (>30%). Conversely, exposure to weathered biofilm microplastics slightly increased earthworms' sensitivity, as well as carbohydrate reserves,without affecting their reproduction. The tested mulch biofilm seems to be, at first sight, an environmentally friendly alternative as it presented susceptibility for biodegradation by a widespread fungus, and the absence of ecotoxicological chronic effects on a key macroinvertebrate species in soil ecosystems when considering environmental relevant concentrations and plastics weathered conditions. Notwithstanding, the obtained results highlight the need to revise current standards, as they often neglect the role of, and their chronic effects on, naturally occurring organisms.

Functional miscibility and thermomechanical properties enhancement of substituted phthalic acetylated modified chitin filler in biopolymer composite

The miscibility between hydrophobic and hydrophilic biopolymers has been of significant challenge. This study used a novel simplified chitin modification method to produce phthalic chitin using phthalic anhydride in a substitution reaction. The FT-IR functional group analysis was used to confirm the substitution reaction. The modified chitin was used as compatibilizer in polylactic acid (PLA)/starch biocomposite to enhance its properties. The biocomposite was prepared using melt extrusion and compression moulding technique. The biocomposite's morphological, thermomechanical and water absorption properties were characterized using scanning electron microscope, tensile test, dynamic mechanical analysis, thermogravimetry analysis, differential scanning calorimetry, thickness swelling and water absorption test. The FT-IR study shows a successful substitution reaction of the amine hydrogen ion present in the chitin as opposed to substituting the hydrogen ion in the hydroxide group. The tensile and impact properties of biocomposite incorporated with modified chitin showed better results compared with other samples. The SEM images showed uniform miscibility of the modified biocomposite. The dynamic mechanical analysis showed improved modulus value with the incorporation of modified chitin. The thermal properties showed improved thermal stability of the modified biocomposite. Furthermore, the percentage of water absorbed by biocomposite with modified chitin is reduced compared with the PLA/starch biocomposite. The produced biodegradable ternary blend can be used as a substitute for plastics in industrial applications.

Synthesis, Characterization, and Optimization Studies of Starch/Chicken Gelatin Composites for Food-Packaging Applications

The indiscriminate use of plastic in food packaging contributes significantly to environmental pollution, promoting the search for more eco-friendly alternatives for the food industry. This work studied five formulations (T1–T5) of biodegradable cassava starch/gelatin films. The results showed the presence of the starch/gelatin functional groups by FT-IR spectroscopy. Differential scanning calorimetry (DSC) showed a thermal reinforcement after increasing the amount of gelatin in the formulations, which increased the crystallization temperature (Tc) from 190 °C for the starch-only film (T1) to 206 °C for the film with 50/50 starch/gelatin (T3). It also exhibited a homogeneous surface morphology, as evidenced by scanning electron microscopy (SEM). However, an excess of gelatin showed low compatibility with starch in the 25/75 starch/gelatin film (T4), evidenced by the low Tc definition and very rough and fractured surface morphology. Increasing gelatin ratio also significantly increased the strain (from 2.9 ± 0.5% for T1 to 285.1 ± 10.0% for T5) while decreasing the tensile strength (from 14.6 ± 0.5 MPa for T1 to 1.5 ± 0.3 MPa for T5). Water vapor permeability (WVP) increased, and water solubility (WS) also decreased with gelatin mass rising in the composites. On the other hand, opacity did not vary significantly due to the films’ cassava starch and gelatin ratio. Finally, optimizing the mechanical and water barrier properties resulted in a mass ratio of 53/47 cassava starch/gelatin as the most appropriate for their application in food packaging, indicating their usefulness in the food-packaging industry.

Development of Starch-Based Bioplastic from Jackfruit Seed

In this article, jackfruit seed starch plasticized with common plasticizers was developed and characterized. At the first step, the research papers that dealt with the fabrication and characterization of starch-based bioplastics were synthesized and analyzed. Next, jackfruit seeds were selected as a source for starch because of their large availability, low price or even free, and high starch capacity. Afterward, a starch-based bioplastic fabrication procedure was proposed. From preliminary tests, plasticizers were sufficiently selected, including water, glycerol, natri bicarbonate, and acid citric. Using different combinations of these plasticizers, four types of bioplastics were then fabricated to study the effect of the plasticizers as well as to characterize the properties of the corresponding bioplastics. A cutting tool for ASTM D412 type A standard tensile testing specimen was then designed and fabricated. Using these dog-bone specimens, tensile results showed that the hardness of the fabricated bioplastic was positively proportional to the ratio of the starch. Furthermore, from SEM characterization, the bioplastic specimens were fully plasticized. Although the fabricated bioplastic has lower mechanical properties than petroleum-based plastics, its environmental friendliness and high potential added value promise to be a material of the future.

High Amylose-Based Bio Composites: Structures, Functions and Applications

As biodegradable and eco-friendly bio-resources, polysaccharides from a wide range of sources show steadily increasing interest. The increasing fossil-based production of materials are heavily associated with environmental and climate concerns, these biopolymers are addressing such concerns in important areas such as food and biomedical applications. Among polysaccharides, high amylose starch (HAS) has made major progress to marketable products due to its unique properties and enhanced nutritional values in food applications. While high amylose-maize, wheat, barley and potato are commercially available, HAS variants of other crops have been developed recently and is expected to be commercially available in the near future. This review edifies various forms and processing techniques used to produce HAS-based polymers and composites addressing their favorable properties as compared to normal starch. Low toxic and high compatibility natural plasticizers are of great concern in the processing of HAS. Further emphasis, is also given to some essential film properties such as mechanical and barrier properties for HAS-based materials. The functionality of HAS-based functionality can be improved by using different fillers as well as by modulating the inherent structures of HAS. We also identify specific opportunities for HAS-based food and biomedical fabrications aiming to produce cheaper, better, and more eco-friendly materials. We acknowledge that a multidisciplinary approach is required to achieve further improvement of HAS-based products providing entirely new types of sustainable materials.

A novel method of creating thermoplastic chitosan blends to produce cell scaffolds by FDM additive manufacturing

Due to its remarkable and promising biological and structural properties, chitosan has been widely studied in several potential applications in the biomedical sector. Attempts are being made to use this polymer and its properties in thermoplastics dedicated to 3D printing in FDM technology. However, chitosan can be processed only from acid solution, which limits its applications. The paper presents a new path for the production of filaments based on unstable chitosan hydrogel obtained by carbon dioxide saturation, as well as synthetic polymers such as polyvinyl alcohol and polycaprolactone. The results confirm that the absence of acid allows formation of thermally stable and printable filaments containing from 5% to 15% of chitosan, capable of reducing S. aureus and E. coli bacteria by 0.41-1.43 in logarithmic scale (56-94%) and 0.28-0.94 in logarithmic scale (36-89%), respectively.

A soft Pickering emulsifier made from chitosan and peptides endows stimuli-responsiveness, bioactivity and biocompatibility to emulsion

Polymeric Pickering emulsifiers may bring new insights to emulsion theory and practice due to their soft characters. Herein, a group of soft Pickering emulsifiers, chitosan-casein hydrophobic peptides nanoparticles (CS-CHP NPs) were prepared with a non-covalent anti-solvent procedure. The CS-CHP NPs provided the contact angles of 37.2°-87.4°, stabilizing O/W or W/O emulsions with enhanced thermal stability, endowing the emulsion with pH and CO₂/N₂ responsiveness. The emulsifying behavior and mechanism presented by CS-CHP NPs were different from that of ordinary hard Pickering emulsifiers, where the appropriate contact angle was 37.2° instead of 87.4° for stabilizing O/W emulsions. Moreover, the nanoparticles possess antioxidant, antibacterial activities and excellent biocompatibility. DPPH and ABTS scavenging activity of the CS-CHP NPs were >220% of that of CS NPs. The last, the emulsion provided high-efficient encapsulation of curcumin, making the soft Pickering emulsifiers a group candidate for drug delivery in food, cosmetics and pharmaceutical industry.

Applications of chitin and chitosan based biomaterials for the adsorptive removal of textile dyes from water - A comprehensive review

The presence of pollutants in the water bodies deteriorate the water quality and make it unfit for use. From an environmental perspective, it is essential to develop new technologies for the wastewater treatment and recycling of dye contaminated water. The surface modified chitin and chitosan biopolymeric composites based adsorbents, have an important role in the toxic organic dyes from removal wastewater. The surface modification of biopolymers with various organics and inorganics produces more active sites at the surface of the adsorbent, which enhances dye and adsorbent interaction more reliable. Herein, the work brought in the thought of the application of various chitin and chitosan composites in wastewater remediation and suggested the versatility in composites for the development of rapid, selective and effective removal processes for the detoxification of a variety of organic dyes. It further emphasizes the existing obstruction and impending prediction for the deprivation of dyes via adsorption techniques.

A Basic Characterisation Study of Bioplastics via Gelatinization of Corn Starch

Plastic waste is the third-largest waste source in the world, so it raises the world’s human health and environmental concerns. Replacing conventional petroleum plastic with bioplastic is an alternative way to minimise plastic wastes from human life and bioplastic is more environmentally friendly. Therefore, this research study aims to synthesise bioplastic from corn starch via gelatinization and study its characteristics. Different from other studies, in this study, new formulations of bioplastics with different ratios of corn starch to glycerol samples that are 1:0.5, 1:1, 2:1, and 2:2, namely Sets A, B, C, and D, respectively, were studied and compared. From the Fourier Transformation Infrared Spectroscopy analysis, the results show that all produced corn starch-based bioplastic samples had the four major plastic’s functional groups which indicated that they were categorized as polyester. Meanwhile, via thermal property analysis, all bioplastic samples could be thermally decomposed from 34 °C to 504 °C where their weight was reduced from 5 mg to 1 mg. Among the four bioplastic samples (Sets A to D) with different ratios of corn starch to glycerol, it was found that a ratio of corn starch and glycerol that was 1:0.5 (Set A) had more biodegradable characteristics and it had the lowest water holding capacity. From the results, Set A could only hold around 4.27 % of the water that could avoid interaction of water with the contents that were wrapped with. Besides, from the results, Set A could degrade better in soils, and dissolve more in ethanol, acetone, and oils when compared to other samples. Since the bioplastic can degrade naturally by the ethanol produced from bacteria in the soils under anaerobic reactions, thus Set A has the potential application to be used as a fertiliser coating to minimise the fertiliser release rate in regions under heavy rainfall.