Integration of in silico modeling, prediction by binding energy and experimental approach to study the amorphous chitin nanocarriers for cancer drug delivery

Modeling and characterization of lenalidomide-loaded tripolyphosphate-crosslinked chitosan nanoparticles for anticancer drug delivery

Tripolyphosphate-crosslinked chitosan (TPPCS) nanoparticles were employed in the encapsulation of lenalidomide (LND) using a straightforward ionic cross-linking approach. The primary objectives of this technique were to enhance the bioavailability of LND and mitigate inadequate or overloading of hydrophobic and sparingly soluble drug towards cancer cells. In this context, a quantum chemical model was employed to elucidate the characteristics of TPPCS nanoparticles, aiming to assess the efficiency of these nanocarriers for the anticancer drug LND. Fifteen configurations of TPPCS and LND (TPPCS /LND1-15) were optimized using B3LYP density functional level of theory and PCM model (H2O). AIM analysis revealed that the high drug loading capacity of TPPCS can be attributed to hydrogen bonds, as supported by the average binding energy (168 kJ mol-1). The encouraging theoretical results prompted us to fabricate this drug delivery system and characterize it using advanced analytical techniques. The encapsulation efficiency of LND within the TPPCS was remarkably high, reaching approximately 87 %. Cytotoxicity studies showed that TPPCS/LND nanoparticles are more effective than the LND drug. To sum up, TPPCS/LND nanoparticles improved bioavailability of poorly soluble LND through cancerous cell membrane. In light of this accomplishment, the novel drug delivery route enhances efficiency, allowing for lower therapy doses.

Hot "Dissolving" Extrusion of Lurasidone with Natural Liquid Small Molecule for Amorphous Solid Dispersion Based Self-Assembled Submicron Emulsion

Nowadays, ≈90% of new drug candidates under development are poorly bioavailable due to their low solubility and/or permeability. Herein, a natural liquid small molecule trans-anethole (TA) is introduced into the drug-polymer system lurasidone (LUS)-poly (1-vinylpyrrolidone-co-vinyl acetate) (VA64), notably improving the compatibility of components for the successful preparation of amorphous solid dispersion (ASD) and facilitating the formation of self-emulsifying drug delivery system (SEDDS) during dissolution. LUS-TA-VA64 ASD shows enhanced supersaturation with a long maintenance time of at least 24 h over pure LUS. The strong non-covalent force between VA64 (as emulsifier) and TA (as oil phase)/ water promotes the self-assembly of submicron emulsion and ensures its stability for at least 10 h. Compared to the commercial salt form of LUS, the ASD shows twofold increase in peak plasma concentration (Cmax ) and area under plasma concentration-time profiles (AUC), 1.5-fold increase in peak time (Tmax ), and twofold decrease in AUC-based coefficient of variation (CV) (59%→26%) after a single oral dose to a rabbit.

In silico-assisted development of supersaturable preconcentrated isotropic mixture of atazanavir for augmenting biopharmaceutical performance in the presence of H2-receptor antagonist

The therapeutic potential of atazanavir (BCS Class II drug), a highly selective inhibitor of human immunodeficiency virus (HIV-1), has been largely limited due to its low intrinsic solubility at elevated pH resulting in low oral bioavailability. Thus, the current work describes the systematic development, optimization, and evaluation of hydroxypropyl methylcellulose acetate succinate (HPMC-AS)-based supersaturable preconcentrate isotropic mixture (SP-IM) containing long-chain triglyceride to improve intestinal lymphatic transport and augment oral bioavailability of atazanavir (ATZ). A D-optimal mixture design was employed for optimization of plain IM containing corn oil, oleic acid, Tween 80, and propylene glycol, evaluating various critical quality attributes (CQAs) like particle size, polydispersity index, self-emulsification time, % transmittance, and drug content. In silico analysis and in vitro supersaturation test facilitated the selection of HPMC-AS as a best suited polymeric precipitation inhibitor (PPI) for formulating ATZ loaded SP-IM (ATZ-SP-IM). In vitro dissolution data indicated that ATZ-SP-IM exhibits superior performance in 0.025 N HCl and pH 6.8 over pure drug. Ex vivo permeation and in vivo pharmacokinetic study of ATZ-SP-IM corroborated enhanced permeation (2.03 fold) and improved drug absorption via lymphatic transport in Wistar rats. Further, the pharmacokinetic performance of ATZ-SP-IM was not affected in presence of H₂ receptor antagonist. Therefore, the results showed that ATZ-SP-IM can significantly improve the biopharmaceutical attributes of ATZ so as to lay a foundation of further research on the new dosage form of ATZ.

Atazanavir-Concentrate Loaded Soft Gelatin Capsule for Enhanced Concentration in Plasma, Brain, Spleen, and Lymphatics

This study investigates the development of atazanavir-concentrate loaded soft gelatin capsule for achieving enhanced atazanavir (ATV) concentration in plasma, brain, spleen, and lymphatics beneficial in the significant reduction of viral load in HIV infection. For this purpose, ATV-concentrate in the presence and absence of Soluplus with corn oil, oleic acid, tween 80, and propylene glycol was developed. The developed ATV-concentrate was found to have enhanced dispersibility with no signs of precipitation after dilution with simulated G.I fluid as evident from particle size (16.49±0.32 nm) and PDI (0.217±0.02) analysis. The rheological and molecular docking studies explainedthe reduction of viscosity of SuATV-C due to the intermolecular H-bond between ATV and Soluplus that helps to retard crystallization. The shell of the soft gelatin capsule retains its integrity when subjected to a folding endurance test on a texture analyzer depicting that the concentrate did not affect the integrity of the soft gelatin capsule shell. An ex vivo and in vivo pharmacokinetic study in rats revealed that the SuATV-C soft gelatin capsule (SuATV-C SGC) indicated 2.9 fold improvement in rate and extent of permeation and absorption than that of ATV-suspension. The tissue distribution study also exhibited higher drug concentration in the brain (2.5 fold), lymph nodes (2.7 fold), and spleen (1.2 fold) administered with SuATV-C SGC, revealing the overwhelming influence of Soluplus and corn oil. In a nutshell, these studies demonstrated that SuATV-C SGC seems to have the potential to deliver an anti-retroviral drug to the viral sanctuaries for the better management of HIV.

Chitin, Chitosan, and Nanochitin: Extraction, Synthesis, and Applications

Crustacean shells are a sustainable source of chitin. Extracting chitin from crustacean shells is ongoing research, much of which is devoted to devising a sustainable process that yields high-quality chitin with minimal waste. Chemical and biological methods have been used extensively for this purpose; more recently, methods based on ionic liquids and deep eutectic solvents have been explored. Extracted chitin can be converted into chitosan or nanochitin. Once chitin is obtained and modified into the desired form, it can be used in a wide array of applications, including as a filler material, in adsorbents, and as a component in biomaterials, among others. Describing the extraction of chitin, synthesis of chitosan and nanochitin, and applications of these materials is the aim of this review. The first section of this review summarizes and compares common chitin extraction methods, highlighting the benefits and shortcomings of each, followed by descriptions of methods to convert chitin into chitosan and nanochitin. The second section of this review discusses some of the wide range of applications of chitin and its derivatives.

Advanced Drug Delivery Modulation via Hybrid Nanofibers Enhances Stem Cell Differentiation

Seamlessly integrating soluble factors onto biomedical scaffolds with a precisely manufactured topography for efficient cell control remains elusive since many scaffold fabrication techniques degrade payloads. Surface adsorption of payloads onto synthesized nanoscaffolds retains bioactivity by removing exposure to harsh processing conditions at the expense of inefficient drug loading and uncontrolled release. Herein, we present a nanomaterial composite scaffold paradigm to improve physicochemical surface adsorption pharmacokinetics. As a proof of concept, we integrated graphene oxide (GO) and manganese dioxide (MnO2) nanosheets onto nanofibers to increase loading capacity and tune drug release. Non-degradable GO enhances payload retention, while biodegradable MnO2 enables cell-responsive drug release. To demonstrate the utility of this hybrid nanomaterial scaffold paradigm for tissue engineering, we adsorbed payloads ranging from small molecules to proteins onto the scaffold to induce myogenesis and osteogenesis for multiple stem cell lines. Scaffolds with adsorbed payloads enabled more efficient differentiation than media supplementation using equivalent quantities of differentiation factors. We attribute this increased efficacy to a reverse uptake mechanism whereby payloads are localized around seeded cells, increasing delivery efficiency for guiding differentiation. Additionally, we demonstrate spatial control over cells since differentiation factors are delivered locally through the scaffold. When co-culturing scaffolds with and without adsorbed payloads, only cells seeded on payload-adsorbed scaffolds underwent differentiation. With this modular technology being capable of enhancing multiple differentiation fates for specific cell lines, this technology provides a promising alternative for current tissue engineering scaffolds.

Reconnoitering the Therapeutic Role of Curcumin in Disease Prevention and Treatment: Lessons Learnt and Future Directions

Turmeric is a plant with a very long history of medicinal use across different cultures. Curcumin is the active part of turmeric, which has exhibited various beneficial physiological and pharmacological effects. This review aims to critically appraise the corpus of literature associated with the above pharmacological properties of curcumin, with a specific focus on antioxidant, anti-inflammatory, anticancer and antimicrobial properties. We have also reviewed the different extraction strategies currently in practice, highlighting the strengths and drawbacks of each technique. Further, our review also summarizes the clinical trials that have been conducted with curcumin, which will allow the reader to get a quick insight into the disease/patient population of interest with the outcome that was investigated. Lastly, we have also highlighted the research areas that need to be further scrutinized to better grasp curcumin’s beneficial physiological and medicinal properties, which can then be translated to facilitate the design of better bioactive therapeutic leads.

Understanding the Effect of Functionalization on Loading Capacity and Release of Drug from Mesoporous Silica Nanoparticles: A Computationally Driven Study

MCM-41, a type of mesoporous silica nanoparticle, has garnered widespread interests as a useful carrier for drug delivery wherein the drug gets adsorbed into the pores of the carrier. To understand the adsorption mechanism and release of the drug at the molecular level, in the current study, it was attempted to generate a computational model for the loading of 5-fluorouracil (5-FU), a chemotherapeutic agent into surface-modified MCM-41. The molecular surface models of the mesoporous silica (MCM-41) nanoparticle with different surface substitutions were created. In the first stage, molecular mechanics (MM) simulations were carried out to obtain the optimized surface structures. Subsequently, a 5-FU drug molecule in its different forms was docked on top of different MCM-41 surfaces to understand the adsorption orientation and energetics. To further validate the results, more accurate quantum mechanical (QM) calculations were also carried out, and the energetics between the QM and MM calculations are found to be similar. All the substitutions (-NH₂, -CN, -COOH) except the methyl substitution exhibited favorable interactions compared to the unsubstituted MCM-41 surface which was in accordance with the experimental observations. The release rate of 5-FU from MCM-41 and aminopropyl-substituted MCM-41 (MCM-NH₂) was studied using molecular dynamics simulations which revealed that the release rate of 5-FU from the MCM-NH₂ surface was slower compared to that of plain MCM-41. The detailed surface characteristics and the adsorption energies from the molecular simulations correlating the loading capacity and release are reported in here.

Targeted drug delivery via folate decorated nanocarriers based on linear polymer for treatment of breast cancer

In this project, a biocompatible block copolymer including poly ethylene glycol and poly caprolactone was synthesized using ring-opening reaction. Then, the copolymer was conjugated to folic acid using lysine as a linker. Also, curcumin (CUR) was used as a therapeutic anticancer agent. Nanoprecipitation method was used to prepare CUR-loaded polymeric micelles. Different methods including Fourier-transform infrared spectroscopy, transmission electron microscopy (TEM), and dynamic light scattering (DLS) were used to characterize the prepared nanocarriers (NCs). MTT assay and hemolysis assay were used to evaluate in vitro anticancer efficiency and biocompatibility of the prepared NCs, respectively. The results proved efficiency of NCs as a drug delivery system (DDS) in various aspects such as physicochemical properties and biocompatibility. Also, in vivo results showed that NCs did not show any severe weight loss and side effects on mice, and the anti-cancer study results of the CUR-loaded NCs proved that the conjugation of folic acid on the surface of NCs as a targeting agent could increase the therapeutic efficacy of CUR.

Naringin as Sustained Delivery Nanoparticles Ameliorates the Anti-inflammatory Activity in a Freund's Complete Adjuvant-Induced Arthritis Model

Naringin (NAR), a naturally occurring essential flavonoid, present in grapefruit and Chinese herbal medicines, creates great interest in researchers due to its diverse biological and pharmacological activities. However, further development of NAR is hindered due to its poor water solubility and dissolution rates in GIT. To address these limitations, in this study, we report polymeric nanoparticles (NPs) of NAR (NAR-PLGA-NPs) for enhancing the oral NAR efficiency, with a biodegradable polymer (PLGA) to improve its absorption and bioavailability. NAR-PLGA-NPs were fabricated by a modified solvent emulsification-evaporation technique. Physicochemical properties were evaluated by SEM, particle size distribution, entrapment efficiency, Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and differential scanning calorimetry (DSC). In vitro drug release and ex vivo permeation studies were carried out in phosphate buffer (pH 6.8) for 24 h. Furthermore, in vivo anti-arthritic studies were performed on a mouse model, and the results were compared with free NAR. The modulation of inflammatory mediators was also evidently supported by docking studies. Optimized nanoformulation FN4 (NAR-PLGA-NPs) prepared with acetone-ethanol (2:1) as a solvent system in a combination of stabilizers, i.e., poloxamer-188 and sodium deoxylate (1:1), along with 2% PVA solution, was prepared. From size characterization studies, it was observed that nanoformulations possessed a low particle size (179.7 ± 2.05 nm), a low polydispersity index (0.206 ± 0.001), and a negative zeta potential (-9.18 ± 0.78 mV) with a maximum entrapment efficiency (74 ± 3.61%). The drug release followed a Korsmeyer-Peppas release kinetic model (anomalous non-Fickian diffusion), providing greater NAR release after lyophilization (82.11 ± 3.65%) drug release in pH 6.8 phosphate buffer for 24 h. Ex vivo permeation analysis through an isolated goat intestinal membrane revealed 80.02 ± 3.69% drug release in 24 h. Encapsulation of a drug into PLGA is well described by the results of FTIR, DSC, and XRD. Finally, the therapeutic efficacy of optimized FN4 (NAR-PLGA-NPs) and its possible application on RA were further confirmed in a Freund's complete adjuvant-induced rat arthritic model as against free NAR at a dose of 20 mg/kg body wt. Our findings demonstrate that sustained action of NAR from optimized FN4 NPs with a rate-controlling polymeric carrier system exhibited prolonged circulation time and reduced arthritic inflammation, hence indicating the possibility as a novel strategy to secure the unpropitious biological interactions of hydrophobic NAR in a gastric environment.

Evolution of the Computational Pharmaceutics Approaches in the Modeling and Prediction of Drug Payload in Lipid and Polymeric Nanocarriers

This review describes different trials to model and predict drug payload in lipid and polymeric nanocarriers. It traces the evolution of the field from the earliest attempts when numerous solubility and Flory-Huggins models were applied, to the emergence of molecular dynamic simulations and docking studies, until the exciting practically successful era of artificial intelligence and machine learning. Going through matching and poorly matching studies with the wet lab-dry lab results, many key aspects were reviewed and addressed in the form of sequential examples that highlighted both cases.

Chitin and chitosan on the nanoscale

In a matter of decades, nanomaterials from biomass, exemplified by nanocellulose, have rapidly transitioned from once being a subject of curiosity to an area of fervent research and development, now reaching the stages of commercialization and industrial relevance. Nanoscale chitin and chitosan, on the other hand, have only recently begun to raise interest. Attractive features such as excellent biocompatibility, antibacterial activity, immunogenicity, as well as the tuneable handles of their acetylamide (chitin) or primary amino (chitosan) functionalities indeed display promise in areas such as biomedical devices, catalysis, therapeutics, and more. Herein, we review recent progress in the fabrication and development of these bio-nanomaterials, describe in detail their properties, and discuss the initial successes in their applications. Comparisons are made to the dominant nanocelluose to highlight some of the inherent advantages that nanochitin and nanochitosan may possess in similar application.

Pleiotropic nature of curcumin in targeting multiple apoptotic-mediated factors and related strategies to treat gastric cancer: A review

Gastric cancer (GC) is one of the major reasons for cancer-associated death and exhibits the second-highest mortality rate worldwide. Several advanced approaches have been designed to treat GC; however, these strategies possess many innate complications. In view of this, the upcoming research relying on natural products could result in designing potential anticancer agents with fewer side effects. Curcumin, isolated from the rhizomes of Curcuma longa L. has several medicinal properties like antiinflammatory, antioxidant, antiapoptotic, antitumor, and antimetastatic. Such pleiotropic nature of curcumin impedes the invasion and proliferation of GC by targeting several oncogenic factors like p23, human epidermal factor receptor2 including Helicobacter pylori. The side effect of chemotherapy, that is, chemotherapeutic resistance and radiotherapy could be reduced combination therapy of curcumin. Moreover, the photodynamic therapy of curcumin destroys the cancer cells without affecting normal cells. However, further more potential studies are required to establish the potent efficacy of curcumin in the treatment of GC. The current review details the anticancer activities of curcumin and related strategies which could be employed to treat GC with additional focus on its inhibitory properties against viability, proliferation, and migration of GC cells through cell cycle arrest and stimulation by apoptosis-mediated factors.

Molecular mechanism of nanochitin whisker elicits plant resistance against Phytophthora and the receptors in plants

Rod-like nanochitin (NC) whisker with cationic nature has a strong synergistic effect with fungicides on inhibition of tobacco root rot disease. This study we explored the activity of NC against Phytophthora and the mechanism for eliciting plant defense response and the receptors in planta. P. capsici isolates, model Nicotiana benthamiana plants and Arabidopsis thaliana were treated with 0.005% of NC suspension and 1 μM of flg22. Infection control efficacy against P. capsici isolates, biosynthetic enzyme activities and the PR genes expression were determined at different hours post treatment in plant. The infection control efficacy, ROS generation, and PTI maker gene expression were re-analyzed in A. thaliana Col-0, bak1 and cerk1 mutants. The results showed that NC did not exhibit inhibitory effect on vegetative growth of P. capsici, but enhanced the resistance against P. capsici by systemically enhanced phenylalanine ammonia-lyase activity and PR gene expression. P. capsici resistance, PTI maker gene promotion, and ROS production in A. thaliana induced by NC depended not only on chitin receptor CERK1, but also BAK1. NC and flg22 induced oomycete immunity through a mechanism of a cross-microbe protection via the BAK1-CERK1 pathway in plant, pointing to the complexity of the plant immunity system.

An applied quantum-chemical model for genipin-crosslinked chitosan (GCS) nanocarrier

The genipin-crosslinked chitosan (GCS) nanocarrier has received a lot of attention due to its unique biological and chemical properties as an effective drug delivery system. GCS was modeled by considering two chitosan (CS) polymer sequences with six monomer units that are crosslinked by genipin. To investigate the characteristics of this model, we considered it as a nanocarrier of the anti-cancer drug cladribine (2CdA). Seven configurations of GCS and 2CdA (GCS/2CdA1-7) were optimized at M06-2X/6-31G(d,p) in aqueous solution. The average binding energy above 100 kJ mol^-1 indicates a high drug loading amount. The high adsorption of the drug on GCS is due to the hydrogen bonds that were investigated by AIM analysis. Hydrogen bonds also allow the drug to be released more slowly. These results were confirmed by experimental evidence and the comparison of this model with the simple model of one polymer chain. Also, the mechanism of GCS formation was investigated by calculating the activation parameters, which indicates that solvent (H₂O) molecules are explicitly involved in the formation of GCS.

Focal drug administration via heparin-containing cryogel microcarriers reduces cancer growth and metastasis

Developing drug delivery systems that release anticancer drugs in a controlled and sustained manner remains challenging. We hypothesized that highly sulfated heparin-based microcarriers would allow electrostatic drug binding and controlled release. In silico modelling showed that the anticancer drug doxorubicin has affinity for the heparin component of the microcarriers. Experimental results showed that the strong electrostatic interaction was reversible, allowing both doxorubicin loading and a subsequent slow release over 42 days without an initial burst release. The drug-loaded microcarriers were able to reduce cancer cell viability in vitro in both hormone-dependent and highly aggressive triple-negative human breast cancer cells. Focal drug treatment, of an in vivo orthotopic triple-negative breast cancer model significantly decreased tumor burden and reduced cancer metastasis, whereas systemic administration of an equivalent drug dose was ineffective. This study proves that heparin-based microcarriers can be used as drug delivery platforms, for focal delivery and sustained long-term drug release.

Recent Advances on Cellulose-Based Nano-Drug Delivery Systems: Design of Prodrugs and Nanoparticles

BACKGROUND

Cellulose being the first abundant biopolymers in nature has many fascinating properties, including low-cost, good biodegradability, and excellent biocompatibility, which made cellulose a real potential material to create nano-drug delivery systems (nano-DDS). This review aims to present and discuss some remarkable recent advances on the drug delivery applications of cellulosebased prodrugs and nanoparticles.

METHODS

By searching the research literatures over last decade, a variety featured studies on cellulosebased nano-DDS were summarized and divided into prodrugs, prodrug nanoparticles, solid or derivative nanopartilces, amphiphilic copolymer nanoparticles, and polyelectrolyte complex nanoparticles. Various methods employed for the functionalization, pharmacodynamic actions and applications were described and discussed.

RESULTS

Many types of cellulose-based nano-DDS can ensure efficient encapsulation of various drugs and then overcome the free drug molecule shortcomings. Among all the method described, cellulosebased amphiphilic nanoparticles are most frequently used. These formulations have the higher drug loading capability, a simple and flexible way to achieve multi-functional. Apart from hydrophilic or hydrophobic modification, cellulose or its derivatives can form nanoparticles with different small molecules and macromolecules, leading to a large spectrum of cellulose-based nano-DDS and providing some unexpected advantages.

CONCLUSION

Thorough physicochemical characterization and profound understanding of interactions of the cellulose-based nano-DDS with cells and tissues is indispensable. Moreover, studies toward technics parameter optimization and scale up from the laboratory to production level should be undertaken. The development of intravenous and orally applicable cellulose-based nano-DDS will be an important research area, and these systems will have more commercial status in the market.

Strategy for improved therapeutic efficiency of curcumin in the treatment of gastric cancer

Gastric cancer is a common oncological disease. Although enormous efforts have been expended, possible therapeutic modalities are still limited. For this reason, new therapeutic approaches and agents are highly requested and intensively developed. One strategy is the application of natural agents, such as curcumin, with proven anticancer effects and low toxicity for patients. Therefore, this review discusses the potential application of curcumin in the therapy of gastric cancer and its potential incorporation in therapeutic regimens. Because one of the largest impediments for widespread curcumin application is its limited bioavailability (caused mainly by its very low water solubility), studied strategies (drug delivery systems and curcumin derivatization) aimed to solve this obstacle are discussed in more detail.

Mucoadhesive electrospun nanofibers for drug delivery systems: applications of polymers and the parameters' roles

Electrospun nanofibers have been widely studied for many medical applications. They can be designed with specific features, including mucoadhesive properties. This review summarizes the polymeric scaffolds obtained by the electrospinning process that has been applied for drug release in different mucosal sites such as oral, ocular, gastroenteric, vaginal, and nasal. We analyzed the electrospinning parameters that have to be optimized to create reproducible and efficient mucoadhesive nanofibers, among them are: electrical field, polymer concentration, viscosity, flow rate, needle-collector distance, solution conductivity, solvent, environmental parameters, and electrospinning setup. We also revised the mucoadhesive theories as well as the mucoadhesive properties of the polymers used. This review shows that the most studied mucosal site is the oral cavity, because it is accessible and easy to evaluate, while the rest are uncomfortable for the patient and difficult to assess in vivo. We found problems that need to be solved for mucoadhesive electrospun nanofibers, such as improving adhesion strength and mucosal permanence time, and the design of unidirectional release, multilayer systems for the treatment of several pathologies, to ensure the drug concentration in the tissue or target organ.

MMP-2-responsive gelatin nanoparticles for synergistic tumor therapy

Purpose: The aim of this study was to develop a new type of nanoparticle that enables concentrated drug release and synergistic therapy. Methods: To this end, we synthesized Ge-DOX-5-ALA/NPs, which can enter tumor tissue by the enhanced permeability and retention (EPR) effect and release drugs by utilizing matrix metalloproteinase-2 (MMP-2). Results: The Ge-DOX-5-ALA/NPs were synthesized by a single-phase coacervation method, and the hydrodynamic diameters of all nanoparticles were under 200 nm. The drug encapsulation and loading efficiency were 92%±1.13% and 6.02% ± 0.48%, respectively. Gelatin zymography was performed to detect the expression of MMP-2 in MCF-7 and Hs578Bst cells. The nanoparticle sensitivity to MMP-2 was examined by comparing the release behavior and cellular uptake in MCF-7 and Hs578Bst cells. In vitro cytotoxicity of the nanoparticles was measured by an MTT assay. An in vivo anticancer efficacy study in S180-bearing mice demonstrated that Ge-DOX-5-ALA/NPs provide a substantial curative effect. A pharmacokinetics experiment demonstrated that the nanoparticles have a sustained release effect. Conclusions: The MMP-2-triggered nanoparticles can transport drugs successfully into the tumor site and enable combined chemotherapy and photodynamic therapy.

Co-delivery of hypoxia inducible factor-1α small interfering RNA and 5-fluorouracil to overcome drug resistance in gastric cancer SGC-7901 cells

BACKGROUND

Drug resistance cancer cells have become a major problem in chemotherapy. To solve this problem, the co-delivery of small interefering RNA (siRNA) and 5-fluorouracil chitosan nanoparticles was employed, aiming to reverse the multidrug resistance of gastric cancer SGC-7901 cells in vitro.

METHODS

Chitosan nanoparticles were prepared using an ionic gel method. siRNA nanoparticles were characterized by gel retardation assays. Particle size and zeta potential were measured to confirm nanoparticle formation. The transfection efficiency of siRNA was determined by flow cytometry and high-content screening. Western blotting and a quantitative real-time-polymerase chain reaction were used to assess the silencing efficiency of siRNA. Accumulation and efflux experiments for rhodamine-123, cell migration experiments, cell sensitivity analyses and cell apoptosis assays were used to determine whether siRNA could reverse multidrug resistance. A systemic toxicity assay was used to evaluate the safety of nanoparticles.

RESULTS

Compared to naked siRNA, the co-delivery system demonstrated a higher transfection efficiency and gene silencing efficiency by inhibiting the efflux of P-glycoprotein and cell migration. Moreover, the combination treatment with siRNA and 5-fluorouracil co-delivered by chitosan nanoparticles can increase the sensitivity of drug resistance cells and cell apoptosis. Finally, the safety of nanoparticles was evaluated in vivo and the results obtained suggested that nanoparticles did not have any obvious toxicity.

CONCLUSIONS

Co-delivery of siRNA and 5-fluorouracil chitosan nanoparticles is an attractive strategy for overcoming multidrug resistance.

Preparation, characterization, drug release and computational modelling studies of antibiotics loaded amorphous chitin nanoparticles

We present a computational investigation of binding affinity of different types of drugs with chitin nanocarriers. Understanding the chitn polymer-drug interaction is important to design and optimize the chitin based drug delivery systems. The binding affinity of three different types of anti-bacterial drugs Ethionamide (ETA) Methacycline (MET) and Rifampicin (RIF) with amorphous chitin nanoparticles (AC-NPs) were studied by integrating computational and experimental techniques. The binding energies (BE) of hydrophobic ETA, hydrophilic MET and hydrophobic RIF were -7.3kcal/mol, -5.1kcal/mol and -8.1kcal/mol respectively, with respect to AC-NPs, using molecular docking studies. This theoretical result was in good correlation with the experimental studies of AC-drug loading and drug entrapment efficiencies of MET (3.5±0.1 and 25± 2%), ETA (5.6±0.02 and 45±4%) and RIF (8.9±0.20 and 53±5%) drugs respectively. Stability studies of the drug encapsulated nanoparticles showed stable values of size, zeta and polydispersity index at 6°C temperature. The correlation between computational BE and experimental drug entrapment efficiencies of RIF, ETA and MET drugs with four AC-NPs strands were 0.999 respectively, while that of the drug loading efficiencies were 0.854 respectively. Further, the molecular docking results predict the atomic level details derived from the electrostatic, hydrogen bonding and hydrophobic interactions of the drug and nanoparticle for its encapsulation and loading in the chitin-based host-guest nanosystems. The present results thus revealed the drug loading and drug delivery insights and has the potential of reducing the time and cost of processing new antibiotic drug delivery nanosystem optimization, development and discovery.

In vitro polyphenol effects on apoptosis: An update of literature data

Polyphenols are secondary plant metabolites which have been studied extensively for their health-promoting properties, and which could also exert pharmacological activities ranging from anti-inflammatory effects, to cytotoxic activity against cancer cells. The main mechanism for programmed cell death is represented by apoptosis, and its dysregulation is involved in the etiopathology of cancer. As such, substances able to induce apoptosis in cancer cells could be used as new anticancer agents. The aim of this paper is to review literature data on the apoptotic effects of polyphenols and the molecular mechanisms through which they induce these effects in cancer cells. In addition, a brief summary of the new delivery forms used to increase the bioavailability, and clinical impact of polyphenols is provided. The studies reported show that many polyphenol rich plant extracts, originating from food and herbal medicine, as well as isolated polyphenols administered individually or in combination, can regulate cell apoptosis primarily through intrinsic and extrinsic mechanisms of action in in vitro conditions. Due to these promising results, the use of polyphenols in the treatment of cancer should therefore be deeply investigated. In particular, because of the low number of clinical trials, further studies are required to evaluate the anticancer activity of polyphenols in in vivo conditions.

Chitin Oligosaccharide (COS) Reduces Antibiotics Dose and Prevents Antibiotics-Caused Side Effects in Adolescent Idiopathic Scoliosis (AIS) Patients with Spinal Fusion Surgery

Antibiotics are always considered for surgical site infection (SSI) in adolescent idiopathic scoliosis (AIS) surgery. However, the use of antibiotics often causes the antibiotic resistance of pathogens and side effects. Thus, it is necessary to explore natural products as drug candidates. Chitin Oligosaccharide (COS) has anti-inflammation and anti-bacteria functions. The effects of COS on surgical infection in AIS surgery were investigated. A total of 312 AIS patients were evenly and randomly assigned into control group (CG, each patient took one-gram alternative Azithromycin/Erythromycin/Cloxacillin/Aztreonam/Ceftazidime or combined daily), experiment group (EG, each patient took 20 mg COS and half-dose antibiotics daily), and placebo group (PG, each patient took 20 mg placebo and half-dose antibiotics daily). The average follow-up was one month, and infection severity and side effects were analyzed. The effects of COS on isolated pathogens were analyzed. SSI rates were 2%, 3% and 8% for spine wounds and 1%, 2% and 7% for iliac wound in CG, EG and PG (p < 0.05), respectively. COS reduces the side effects caused by antibiotics (p < 0.05). COS improved biochemical indexes and reduced the levels of interleukin (IL)-6 and tumor necrosis factor (TNF) alpha. COS reduced the antibiotics dose and antibiotics-caused side effects in AIS patients with spinal fusion surgery by improving antioxidant and anti-inflammatory activities. COS should be developed as potential adjuvant for antibiotics therapies.

Relationship between Surface Properties and In Vitro Drug Release from Compressed Matrix Containing Polymeric Materials with Different Hydrophobicity Degrees

This work is the continuation of a study focused on establishing relations between surface thermodynamic properties and in vitro release mechanisms using a model drug (ampicillin trihydrate), besides analyzing the granulometric properties of new polymeric materials and thus establishing the potential to be used in the pharmaceutical field as modified delivery excipients. To do this, we used copolymeric materials derived from maleic anhydride with decreasing polarity corresponding to poly(isobutylene-alt-maleic acid) (hydrophilic), sodium salt of poly(maleic acid-alt-octadecene) (amphiphilic), poly(maleic anhydride-alt-octadecene) (hydrophobic) and the reference polymer hydroxyl-propyl-methyl-cellulose (HPMC). Each material alone and in blends underwent spectroscopic characterization by FTIR, thermal characterization by DSC and granulometric characterization using flow and compaction tests. Each tablet was prepared at different polymer ratios of 0%, 10%, 20%, 30% and 40%, and the surface properties were determined, including the roughness by micro-visualization, contact angle and water absorption rate by the sessile drop method and obtaining Wadh and surface free energy (SFE) using the semi-empirical models of Young-Dupré and  Owens-Wendt-Rabel-Käelbe (OWRK), respectively. Dissolution profiles were determined simulating physiological conditions in vitro, where the kinetic models of order-zero, order-one, Higuchi and Korsmeyer-Peppas were evaluated. The results showed a strong relationship between the proportion and nature of the polymer to the surface thermodynamic properties and kinetic release mechanism.

Fabrication, Characterization, and Evaluation of Bionanocomposites Based on Natural Polymers and Antibiotics for Wound Healing Applications

The aim of our research activity was to obtain a biocompatible nanostructured composite based on naturally derived biopolymers (chitin and sodium alginate) loaded with commercial antibiotics (either Cefuroxime or Cefepime) with dual functions, namely promoting wound healing and assuring the local delivery of the loaded antibiotic. Compositional, structural, and morphological evaluations were performed by using the thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and fourier transform infrared spectroscopy (FTIR) analytical techniques. In order to quantitatively and qualitatively evaluate the biocompatibility of the obtained composites, we performed the tetrazolium-salt (MTT) and agar diffusion in vitro assays on the L929 cell line. The evaluation of antimicrobial potential was evaluated by the viable cell count assay on strains belonging to two clinically relevant bacterial species (i.e., Escherichia coli and Staphylococcus aureus).