Porous dressings of modified chitosan with poly(2-hydroxyethyl acrylate) for topical wound delivery of levofloxacin

An inulin-based glycovesicle for pathogen-targeted drug delivery to ameliorate salmonellosis

The gut microbiota plays a significant role in the pathogenesis and remission of inflammatory bowel disease. However, conventional antibiotic therapies may alter microbial ecology and lead to dysbiosis of the gut microbiome, which greatly limits therapeutic efficacy. To address this challenge, novel nanomicelles that couple inulin with levofloxacin via disulfide bonds for the treatment of salmonellosis were developed in this study. Owing to their H2S-responsiveness, the nanomicelles can target the inflamed colon and rapidly release levofloxacin to selectively fight against enteric pathogens. Moreover, the embedded inulin can serve as prebiotic fiber to increase the amount of Bifidobacteria and Lactobacilli in mice with salmonellosis, thus maintaining the intestinal mechanical barrier and regulating the balance of the intestinal flora. Therefore, multifunctional nanomicelles had a better curative effect than pure levofloxacin on ameliorating inflammation in vivo. The pathogen-targeted glycovesicle represents a promising drug delivery platform to maximize the efficacy of antibacterial drugs for the treatment of inflammatory bowel disease.

Natural Polymer-Polyphenol Bioadhesive Coacervate with Stable Wet Adhesion, Antibacterial Activity, and On-Demand Detachment

Medical adhesives are emerging as an important clinical tool as adjuvants for sutures and staples in wound closure and healing and in the achievement of hemostasis. However, clinical adhesives combining cytocompatibility, as well as strong and stable adhesion in physiological conditions, are still in demand. Herein, a mussel-inspired strategy is explored to produce adhesive coacervates using tannic acid (TA) and methacrylate pullulan (PUL-MA). TA|PUL-MA coacervates mainly comprise van der Waals forces and hydrophobic interactions. The methacrylic groups in the PUL backbone increase the number of interactions in the adhesives matrix, resulting in enhanced cohesion and adhesion strength (72.7 Jm-2), compared to the non-methacrylated coacervate. The adhesive properties are kept in physiologic-mimetic solutions (72.8 Jm-2) for 72 h. The photopolymerization of TA|PUL-MA enables the on-demand detachment of the adhesive. The poor cytocompatibility associated with the use of phenolic groups is here circumvented by mixing reactive oxygen species-degrading enzyme in the adhesive coacervate. This addition does not hamper the adhesive character of the materials, nor their anti-microbial or hemostatic properties. This affordable and straightforward methodology, together with the tailorable adhesivity even in wet environments, high cytocompatibility, and anti-bacterial activity, enables foresee TA|PUL-MA as a promising ready-to-use bioadhesive for biomedical applications.

Recent advances in chitosan-based materials; The synthesis, modifications and biomedical applications

The attention to polymer-based biomaterials, for instance, chitosan and its derivatives, as well as the techniques for using them in numerous scientific domains, is continuously rising. Chitosan is a decomposable naturally occurring polymeric material that is mostly obtained from seafood waste. Because of its special ecofriendly, biocompatible, non- toxic nature as well as antimicrobial properties, chitosan-based materials have received a lot of interest in the field of biomedical applications. The reactivity of chitosan is mainly because of the amino and hydroxyl groups in its composition, which makes it further fascinating for various uses, including biosensing, textile finishing, antimicrobial wound dressing, tissue engineering, bioimaging, gene, DNA and drug delivery and as a coating material for medical implants. This study is an overview of the different types of chitosan-based materials which now a days have been fabricated by applying different techniques and modifications that include etherification, esterification, crosslinking, graft copolymerization and o-acetylation etc. for hydroxyl groups' processes and acetylation, quaternization, Schiff's base reaction, and grafting for amino groups' reactions. Furthermore, this overview summarizes the literature from recent years related to the important applications of chitosan-based materials (i.e., thin films, nanocomposites or nanoparticles, sponges and hydrogels) in different biomedical applications.

Multifunctional Chitosan Scaffold Platforms Loaded with Natural Polyphenolic Extracts for Wound Dressing Applications

Chitosan (CS)-based scaffolds loaded with Pinus radiata extract bark (PE) and grape seed extract (GSE) were successfully developed for wound dressing applications. The effects of incorporating GSE and PE in CS scaffolds were investigated in relation to their physicochemical and biological properties. All scaffolds exhibited porous structures with the ability to absorb more than 70 times their weight when contacted with blood and phosphate buffer solution. The incorporation of GSE and PE into the CS scaffolds increased their blood absorption ability and degradation rates over time. All scaffolds showed a clotting ability above 95%, with their surfaces being favorable for red blood cell attachment. Both GSE and PE were released from the CS scaffolds in a sustained manner. Scaffolds loaded with GSE and PE inhibited the bacterial activity of S. aureus and E. coli by 40% and 44% after 24 h testing. In vitro cell viability studies demonstrated that all scaffolds were nontoxic to HaCaT cells. Importantly, the addition of GSE and PE further increased cell viability compared to that of the CS scaffold. This study provides a new synthesis method to immobilize GSE and PE on CS scaffolds, enabling the formation of novel material platforms with a high potential for wound dressing applications.

Biomimetic Adhesive Micropatterned Hydrogel Patches for Drug Release

The optimized physical adhesion between bees' leg hairs and pollen grains-whereby the latter's diameter aligns with the spacing between the hairs-has previously inspired the development of a biomimetic drug dressing. Combining this optimized process with the improved natural mussels' adhesion in wet environments in a dual biomimetic process, it is herein proposed the fabrication of a natural-derived micropatterned hydrogel patch of methacrylated laminarin (LAM-MET), with enriched drug content and improved adhesiveness, suitable for applications like wound healing. Enhanced adhesion is accomplished by modifying LAM-MET with hydroxypyridinone groups, following the patch microfabrication by soft lithography and UV/vis-irradiation, resulting in a membrane with micropillars with a high aspect ratio. Following the biomimetics rational, a drug patch is engineered by combining the microfabricated dressing with drug particles milled to fit the spaces between pillars. Controlled drug release is achieved, together with inherent antibacterial activity against Escherichia coli and Pseudomonas aeruginosa, and enhanced biocompatibility using the bare micropatterned patches. This new class of biomimetic dressings overcomes the challenges of current patches, like poor mechanical properties and biocompatibility, limited adhesiveness and drug dosage, and lack of prolonged antimicrobial activity, opening new insights for the development of high drug-loaded dressings with improved patient compliance.

The Application of Nanogels as Efficient Drug Delivery Platforms for Dermal/Transdermal Delivery

The delivery of active molecules via the skin seems to be an efficient technology, given the various disadvantages of oral drug administration. Skin, which is the largest human organ of the body, has the important role of acting as a barrier for pathogens and other molecules including drugs; in fact, it serves as a primary defense system blocking any particle from entering the body. Therefore, to overcome the skin barriers and poor skin permeability, researchers implement novel carriers which can effectively carry out transdermal delivery of the molecules. Another significant issue which medical society tries to solve is the effective dermal delivery of molecules especially for topical wound delivery. The application of nanogels is only one of the available approaches offering promising results for both dermal and transdermal administration routes. Nanogels are polymer-based networks in nanoscale dimensions which have been explored as potent carriers of poorly soluble drugs, genes and vaccines. The nanogels present unique physicochemical properties, i.e., high surface area, biocompatibility, etc., and, importantly, can improve solubility. In this review, authors aimed to summarize the available applications of nanogels as possible vehicles for dermal and transdermal delivery of active pharmaceutical ingredients and discuss their future in the pharmaceutical manufacturing field.

Therapeutic Potential of Nanocarrier-Mediated Delivery of Phytoconstituents for Wound Healing: Their Current Status and Future Perspective

The treatment of wounds is a serious problem all over the world and imposes a huge financial burden on each and every nation. For a long time, researchers have explored wound dressing that speeds up wound healing. Traditional wound dressing does not respond effectively to the wound-healing process as expected. Therapeutic active derived from plant extracts and extracted bioactive components have been employed in various regions of the globe since ancient times for the purpose of illness, prevention, and therapy. About 200 years ago, most medical treatments were based on herbal remedies. Especially in the West, the usage of herbal treatments began to wane in the 1960s as a result of the rise of allopathic medicine. In recent years, however, there has been a resurgence of interest in and demand for herbal medicines for a number of reasons, including claims about their efficacy, shifting consumer preferences toward natural medicines, high costs and negative side effects of modern medicines, and advancements in herbal medicines brought about by scientific research and technological innovation. The exploration of medicinal plants and their typical uses could potentially result in advanced pharmaceuticals that exhibit reduced adverse effects. This review aims to present an overview of the utilization of nanocarriers in plant-based therapeutics, including its current status, recent advancements, challenges, and future prospects. The objective is to equip researchers with a comprehensive understanding of the historical background, current state, and potential future developments in this emerging field. In light of this, the advantages of nanocarriers based delivery of natural wound healing treatments have been discussed, with a focus on nanofibers, nanoparticles, nano-emulsion, and nanogels.

Antimicrobial efficacy of composite irrigation solution against dominant pathogens in seawater immersion wound and in vivo wound healing assessment

Seawater immersion wound is inevitably accompanied by bacterial infection. Effective irrigation is critical for bacterial infection prevention and wound healing. In this study, the antimicrobial efficacy of a designed composite irrigation solution against several dominant pathogens in seawater immersion wounds was evaluated, and in vivo wound healing assessment was conducted in a rat model. According to the time-kill result, the composite irrigation solution exhibits excellent and rapid bactericidal effect against Vibrio alginolyticus and Vibrio parahaemolyticus within 30 s of treatment while eliminating Candida albicans, Pseudomonas aeruginosa, Escherichia coli, and the mixed microbes after 1 h, 2 h, 6 h, and 12 h of treatment, respectively. Significant bacterial count reduction of Staphylococcus aureus was observed after 5 h treatment. In addition to its skin non-irritating attribute, the in vivo wound healing results further demonstrated that the irrigation solution showed high repair efficiency in the skin defect model inoculated with the mixed microbes. The wound healing rate was significantly higher than that of the control and normal saline groups. It could also effectively reduce the number of viable bacteria on the wound surface. The histological staining indicated that the irrigation solution could reduce inflammatory cells and promote collagen fibers and angiogenesis, thereby promoting wound healing. We believed that the designed composite irrigation solution has great potential for application in the treatment of seawater immersion wounds.

Chitosan nanoparticle loaded by epidermal growth factor as a potential protein carrier for wound healing: In vitro and in vivo studies

Epidermal growth factor (EGF) can be efficiently used in wound healing process; but the main obstacle of its clinical use is its susceptibility to proteolysis and maintaining its effective concentration in the site of action. In this study, chitosan nanoparticles containing EGF is formulated using a simple method to increase its stability in physiological pH as well as protect its biological activity and effectiveness in wound healing process. Nanoparticles with different ratios of chitosan/EGF were prepared and evaluated in vitro and in vivo. Obtained results showed nanoparticles with 2:1 ratio of chitosan/EGF were able to release 80% of encapsulated protein after 12 h. Cell proliferation study demonstrated that prepared nanoparticles could protect EGF functionality in physiological pH. In vivo results showed that nanoparticles with 2:1 ratio of chitosan/EGF could significantly accelerate the wound closure-rate, re-epithelialisation and collagen deposition. In conclusion, the designed nanoparticles in optimal ratio can be considered as a potential vehicle for EGF delivery to wounds with the aim of improving healing process.

Therapeutic and pro-healing potential of advanced wound dressings loaded with bioactive agents

Chronic skin wound infections are inextricably linked with high mortality rates. With the rise in the aging population and the threat of diabetes, obesity and lifestyle-based diseases, the risk incurred from invasive wound pathogens has been ever escalating. Thus, more efficacious wound care management is necessary to cope with such morbid illnesses. A plethora of bioactive agents, such as antibiotics, phytochemicals, essential oils, phages among others, has been exploited to develop wound dressings, raising tremendous interest in their prospective use as wound care products. The present review critically focuses on the therapeutic implications of advanced wound dressings that have assisted in the expansion of regenerative medicine and also discusses the practical concerns that have limited their bench-to-market entry.

Amphotericin B- and Levofloxacin-Loaded Chitosan Films for Potential Use in Antimicrobial Wound Dressings: Analytical Method Development and Its Application

Levofloxacin (LVX) and amphotericin B (AMB) have been widely used to treat bacterial and fungal infections in the clinic. Herein, we report, for the first time, chitosan films loaded with AMB and LVX as wound dressings to combat antimicrobial infections. Additionally, we developed and validated a high-performance liquid chromatography (HPLC) method coupled with a UV detector to simultaneously quantify both AMB and LVX. The method is easy, precise, accurate and linear for both drugs at a concentration range of 0.7-5 µg/mL. The validated method was used to analyse the drug release, ex vivo deposition and permeation from the chitosan films. LVX was released completely from the chitosan film after a week, while approximately 60% of the AMB was released. Ex vivo deposition study revealed that, after 24-hour application, 20.96 ± 13.54 µg of LVX and approximately 0.35 ± 0.04 µg of AMB was deposited in porcine skin. Approximately 0.58 ± 0.16 µg of LVX permeated through the skin. AMB was undetectable in the receptor compartment due to its poor solubility and permeability. Furthermore, chitosan films loaded with AMB and LVX were found to be able to inhibit the growth of both Candida albicans and Staphylococcus aureus, indicating their potential for antimicrobial applications.

Proanthocyanidins from Vaccinium vitis-idaea L. Leaves: Perspectives in Wound Healing and Designing for Topical Delivery

The compositions and health-beneficial properties of lingonberry leaves (Vaccinium vitis-idaea L.) are well established; however, their proanthocyanidins are still heavily underutilized. Optimizing their delivery systems is key to enabling their wider applications. The present study investigates the phytochemical and 'wound-healing' properties of proanthocyanidin-rich fraction(s) (PRF) from lingonberry leaves as well as the development of optimal dermal film as a proanthocyanidin delivery system. The obtained PRF was subjected to HPLC-PDA and DMAC analyses to confirm the qualitative and quantitative profiles of different polymerization-degree proanthocyanidins. A 'wound healing' in vitro assay was performed to assess the ability of PRF to modulate the wound environment for better healing. Low concentrations of lingonberry proanthocyanidins were found to accelerate 'wound' closures, while high levels inhibited human fibroblast migration. Fifteen dermal films containing PRF were prepared and evaluated based on their polymer (MC, HEC, PEG 400) compositions, and physical, mechanical, and biopharmaceutical properties using an experimental design. The composition containing 0.30 g of MC, 0.05 g of HEC, and 3.0 g of PEG 400 was selected as a promising formulation for PRF delivery and a potentially effective functional wound dressing material, supporting the need for further investigations.

Progress in Research of Chitosan Chemical Modification Technologies and Their Applications

Chitosan, which is derived from chitin, is the only known natural alkaline cationic polymer. Chitosan is a biological material that can significantly improve the living standard of the country. It has excellent properties such as good biodegradability, biocompatibility, and cell affinity, and has excellent biological activities such as antibacterial, antioxidant, and hemostasis. In recent years, the demand has increased significantly in many fields and has huge application potential. Due to the poor water solubility of chitosan, its wide application is limited. However, chemical modification of the chitosan matrix structure can improve its solubility and biological activity, thereby expanding its application range. The review covers the period from 1996 to 2022 and was elaborated by searching Google Scholar, PubMed, Elsevier, ACS publications, MDPI, Web of Science, Springer, and other databases. The various chemical modification methods of chitosan and its main activities and application research progress were reviewed. In general, the modification of chitosan and the application of its derivatives have had great progress, such as various reactions, optimization of conditions, new synthetic routes, and synthesis of various novel multifunctional chitosan derivatives. The chemical properties of modified chitosan are usually better than those of unmodified chitosan, so chitosan derivatives have been widely used and have more promising prospects. This paper aims to explore the latest progress in chitosan chemical modification technologies and analyze the application of chitosan and its derivatives in various fields, including pharmaceuticals and textiles, thus providing a basis for further development and utilization of chitosan.

When time does not heal all wounds-the use of medical grade honey in wound healing: a case series

OBJECTIVE

Hard-to-heal wounds can be caused by persistent infections or an excess of inflammatory cytokines, proteases and oxidants, and can severely impact the quality of life (QoL) of patients. Due to the paucity of effective treatments and increased resistance to antibiotics, new and improved therapies are required to resolve infections and to simultaneously enhance the healing trajectory. Medical grade honey (MGH) may be a novel and effective treatment approach.

METHODS

In this case series, we have described six cases of hard-to-heal wounds, and discussed the effects of MGH on infection, wound healing and factors influencing patient QoL (pain, odour and exudate). In all cases, the wounds had persisted for a long period, and previous treatments had been ineffective. Most of the patients had comorbidities, and the majority of the wounds were contaminated with (multiresistant) bacteria, both of which contributed to non-healing. All wounds were treated with L-Mesitran (MGH-based wound care products, Triticum Exploitatie BV, the Netherlands) either as monotherapy or as a complementary therapy.

RESULTS

Hard-to-heal wounds started healing, infection was controlled and QoL was strongly improved (malodour, exudate levels and pain swiftly decreased) after the application of the MGH. All wounds healed relatively quickly, considering the severity of the wounds and general health of the patients.

CONCLUSION

In this study, MGH was a useful alternative or complementary therapy to antibiotics and expedited the healing of hard-to-heal wounds.

Wound-Healing Potential of Rhoifolin-Rich Fraction Isolated from Sanguisorba officinalis Roots Supported by Enhancing Re-Epithelization, Angiogenesis, Anti-Inflammatory, and Antimicrobial Effects

A wound is a complicated bioprocess resulting in significant tissue damage, which is worsened by a secondary bacterial infection, commonly Pseudomonas aeruginosa and Staphylococcus aureus. The goal of our study was to investigate the metabolic profile and possible wound-healing effect of Sanguisorba officinalis roots rhoifolin rich fraction (RRF). The LC-ESI-MS/MS analysis of S. officinalis roots crude ethanol extract resulted in a tentative identification of 56 bioactive metabolites, while a major flavonoid fraction was isolated by column chromatography and identified by thin-layer chromatography coupled with electrospray ionization/mass spectrometry (TLC-ESI/MS), where rhoifolin was the major component representing 94.5% of its content. The antibiofilm activity of RRF on the mono-species and dual-species biofilm of P. aeruginosa and S. aureus was investigated. RRF exhibited inhibitory activity on P. aeruginosa and S. aureus mono-species biofilm at 2× minimum inhibitory concentration (MIC) and 4× MIC values. It also significantly inhibited the dual-species biofilm at 4× MIC values. Moreover, the wound-healing characteristics of RRF gel formulation were investigated. Rats were randomly allocated into four groups (eight rats in each): Untreated control; Blank gel; Betadine cream, and RRF gel groups. Animals were anesthetized, and full-thickness excisional skin wounds were created on the shaved area in the dorsal skin. The gels were topically applied to the wound’s surface daily for 10 days. The results demonstrated that RRF had a promising wound-healing effect by up-regulating the platelet-derived growth factor (PDGF), vascular endothelial growth factor (VEGF), keratinocyte growth factor (KGF), and fibronectin, while metalloproteinase-1 (MMP-1), interleukin-6 (IL-6), IL-1β, and nitric oxide (NO) levels were suppressed. It also enhanced the immune staining of transforming growth factor (TGF-β) and improved histopathological findings. Furthermore, it displayed an immunomodulatory action on lipopolysaccharide-induced peripheral blood mononuclear cells. Hence, the wound-healing effect of rhoifolin was confirmed by supporting re-epithelization, angiogenesis, antibacterial, immunomodulatory, and anti-inflammatory activities.

Chitosan Nanoparticle-Based System: A New Insight into the Promising Controlled Release System for Lung Cancer Treatment

Lung cancer has been recognized as one of the most often diagnosed and perhaps most lethal cancer diseases worldwide. Conventional chemotherapy for lung cancer-related diseases has bumped into various limitations and challenges, including non-targeted drug delivery, short drug retention period, low therapeutic efficacy, and multidrug resistance (MDR). Chitosan (CS), a natural polymer derived from deacetylation of chitin, and comprised of arbitrarily distributed β-(1-4)-linked d-glucosamine (deacetylated unit) and N-acetyl-d-glucosamine (acetylated unit) that exhibits magnificent characteristics, including being mucoadhesive, biodegradable, and biocompatible, has emerged as an essential element for the development of a nano-particulate delivery vehicle. Additionally, the flexibility of CS structure due to the free protonable amino groups in the CS backbone has made it easy for the modification and functionalization of CS to be developed into a nanoparticle system with high adaptability in lung cancer treatment. In this review, the current state of chitosan nanoparticle (CNP) systems, including the advantages, challenges, and opportunities, will be discussed, followed by drug release mechanisms and mathematical kinetic models. Subsequently, various modification routes of CNP for improved and enhanced therapeutic efficacy, as well as other restrictions of conventional drug administration for lung cancer treatment, are covered.

Application of self-healing, swellable and biodegradable polymers for wound treatment

AIM

Self-healing, swellable and biodegradable polymers are vital materials that may facilitate the different stages of wound healing. The aim of this research was to prepare wound healing films using self-healing polyvinyl alcohol (PVA), swellable hydroxypropyl methylcellulose (HPMC), biodegradable polyglycolic acid (PGA) sutures and ciprofloxacin antibiotic for improved treatment outcome.

METHODS

Films were formulated through aqueous-based mixing of varying amounts of polyvinyl alcohol (10-20% weight/weight (w/w)) and hydroxypropyl methylcellulose (0.5, 1% w/w) with fixed quantities of ciprofloxacin. PGA sutures were placed as grids within the wet mixtures of the polymers and ciprofloxacin, and thereafter products were air dried. The formulated films were evaluated for swelling ratio, breaking elongation, folding endurance, moisture uptake and loss, compatibility and in vitro antibiotic release. Furthermore, in vivo wound healing was studied using excision model and histopathological examinations.

RESULTS

Swelling ratios were above 1.0 and the films were minimally stretchable, with folding endurance greater than 500. Films were stable while moisture uptake and loss were observed to be less than 30%. Among the optimised hydrogel batches, those containing 10% w/w PVA and 1% w/w HPMC with no PGA showed the highest drug release of 73%, whereas the batches with higher PGA content showed higher percentage wound size reduction with minimal scar. The completeness of wound healing with batches containing PVA, HPMC, ciprofloxacin and PGA, along with the standard, is evident considering the massive cornification, regeneration of the epithelial front and stratum spinosum.

CONCLUSION

The findings show that polymer-based multifunctional composite films are suitable for use as dressings for improved wound healing.

Antimicrobial Peptides: The Promising Therapeutics for Cutaneous Wound Healing

Chronic wound infections have caused an increasing number of deaths and economic burden, which necessitates wound treatment options. Hitherto, the development of functional wound dressings has achieved reasonable progress. Antibacterial agents, growth factors, and miRNAs are incorporated in different wound dressings to treat various types of wounds. As an effective antimicrobial agent and emerging wound healing therapeutic, antimicrobial peptides (AMPs) have attracted significant attention. The present study focuses on the application of AMPs in wound healing and discusses the types, properties and formulation strategies of AMPs used for wound healing. In addition, the clinical trial and the current status of studies on "antimicrobial peptides and wound healing" are elaborated through bibliometrics. Also, the challenges and opportunities for further development and utilization of AMP formulations in wound healing are discussed.

Chloramphenicol Loaded Sponges Based on PVA/Nanocellulose Nanocomposites for Topical Wound Delivery

In the present study, polymer sponges based on poly(vinyl alcohol) (PVA) were prepared for the topical wound administration of chloramphenicol (CHL), an antibiotic widely used to treat bacterial infections. Nanocellulose fibrils (CNF) were homogenously dispersed in PVA sponges in three different ratios (2.5, 5, and 10 wt %) to improve the mechanical properties of neat PVA sponges. Infrared spectroscopy showed hydrogen bond formation between CNF and PVA, while scanning electron microscopy photos verified the successful dispersion of CNF to PVA sponges. The addition of CNF successfully enhanced the mechanical properties of PVA sponges, exhibiting higher compressive strength as the content of CNF increased. The PVA sponge containing 10 wt % CNF, due to its higher compression strength, was further studied as a matrix for CHL delivery in 10, 20, and 30 wt % concentration of the drug. X-ray diffraction showed that CHL was encapsulated in an amorphous state in the 10 and 20 wt % samples, while some crystallinity was observed in the 30 wt % ratio. In vitro dissolution studies showed enhanced CHL solubility after its incorporation in PVA/10 wt % CNF sponges. Release profiles showed a controlled release lasting three days for the sample containing 10 wt % CHL and 1.5 days for the other two samples. According to modelling, the release is driven by a pseudo-Fickian diffusion.

Current Status of Mucoadhesive Gel Systems for Buccal Drug Delivery

BACKGROUND

Buccal drug delivery is a fascinating research field. Gel-based formulations present potent characteristics as buccal systems since they have great physicochemical properties.

METHODS

Among the various gels, in situ gels are viscous colloidal systems consisting of polymers; when physiological conditions change (pH, temperature, ion activation), they are transformed into the gel phase. These systems can improve bioavailability. Other systems, such as nanogels or emulgels can also be applied for buccal delivery with promising results. Polymeric gel-based systems can be produced by natural, semisynthetic, and synthetic polymers. Their main advantage is that the active molecules can be released in a sustained and controllable manner. Several gels based on chitosan are produced for the entrapment of drugs demonstrating efficient retention time and bioavailability due to chitosan mucoadhesion. Besides polysaccharides, poloxamers and carbopol are also used in buccal gels due to their high swelling ability and reversed thermal gelation behavior.

RESULTS

Herein, the authors focused on the current development of mucoadhesive gel systems used in buccal drug delivery. After explaining buccal drug delivery and mucoadhesion, various studies with hydrogels, in situ gels, and nanogels were analyzed as buccal gel systems. Various mucoadhesive gel studies with mucoadhesive polymers have been studied and summarized. This review is presented as valuable guidance to scientists in formulating buccal mucoadhesive drug delivery systems.

CONCLUSION

This review aimed to assist researchers working on buccal drug delivery by summarizing buccal drug delivery, mucoadhesion, and buccal mucoadhesive gel systems recently found in the literature.

Promising Polymeric Drug Carriers for Local Delivery: The Case of in situ Gels

BACKGROUND

At present, the controlled local drug delivery is a very promising approach compared to systemic administration, since it mostly targets the affected tissue. In fact, various drug carriers for local delivery have been prepared with improved therapeutic efficacy.

OBJECTIVE

in situ polymer gels are drug delivery systems that not only present liquid characteristics before their administration in body, but once they are administered, form gels due to gelation. Their gelation mechanism is due to factors such as pH alteration, temperature change, ion activation or ultraviolet irradiation. in situ gels offer various advantages compared to conventional formulations due to their ability to release drugs in a sustainable and controllable manner. Most importantly, in situ gels can be used in local drug delivery applications for various diseases.

METHODS

This review includes the basic knowledge and theory of in situ gels as well as their various applications according to their administration route.

RESULTS

Various natural, semisynthetic, and synthetic polymers can produce in situ polymeric gels. For example, natural polysaccharides such as alginic acid, chitosan, gellan gum, carrageenan etc. have been utilized as in situ gels for topical delivery. Besides the polysaccharides, poloxamers, poly(Nisopropylacrylamide), poly(ethyleneoxide)/ (lactic-co-glycolic acid), and thermosensitive liposome systems can be applied as in situ gels. In most cases, in situ polymeric gels could be applied via various administration routes such as oral, vaginal, ocular, intranasal and injectable.

CONCLUSION

To conclude, it can be revealed that in situ gels could be a promising alternative carrier for both chronic and immediate diseases.

Super absorbent chitosan-based hydrogel sponges as carriers for caspofungin antifungal drug

Novel chitosan copolymers (CS-g-SBMA) grafted with [2-(methacryloyloxy)ethyl]dimethyl-(3-sulfopropyl)ammonium hydroxide (SBMA) in various molar ratio 1.5:1, 5:1, 11.5:1 and 20:1, were synthesized in the present study. SBMA was selected as zwitterion molecule showing promising antibacterial properties. Grafted chitosan derivatives were fully characterized for their successful synthesis by NMR and FT-IR, for their crystallinity by XRD showing reduced crystallinity compared to CS alone. Furthermore, swelling studies were conducted with the grafted derivatives showing extensive swelling capacity (maximum degree of swelling up to 1800%) and water absorption was studied with differential scanning calorimetry and equilibrium water adsorption/desorption isotherms were analyzed. Caspofungin, a novel antifungal drug, was used to prepare a double-acting system, with both antibacterial and antifungal properties, proper for topical use. Drug loaded hydrogels were prepared with 10, 20 and 30 wt% drug content and the loaded hydrogels were fully characterized while antimicrobial studies showed enhanced properties. Caspofungin in vitro release showed an initial burst effect followed by a diffusion process while data analysis verified the initial burst release followed by a quasi Fickian diffusion-driven sustained release. Enhance antimicrobial properties was also observed in caspofungin-loaded hydrogels showing the successful fulfill of our scope; an amphiphilic system having great potential for the development of patches with inherent antimicrobial properties and prolonged antifungal properties.

Chitosan-bovine serum albumin-Carbopol 940 nanogels for mupirocin dermal delivery: ex-vivo permeation and evaluation of cellular binding capacity via radiolabeling

The goal of this study was to develop and examine the nanogel-based topical delivery system of mupirocin. Nanogels were prepared with chitosan and bovine serum albumin by ionic gelation and Carbopol 940 was added to improve the gelling/adhesive properties. Detailed characterization studies were performed and the cellular binding capacity of radiolabeled nanogels was investigated on CCD-1070Sk cell lines. Results indicate the successful formation of nanogels with particle size and zeta potential ranged between 341.920-603.320 nm and 13.120-24.300 mV, respectively. The mechanical and rheological studies proved pseudoplastic and strong elastic gel behavior (G' > G''). Mupirocin was successfully entrapped into nanogels with a ratio of more than 95% and the loaded drug was slowly released up to 93.89 ± 3.07% within 24 h. The ex vivo penetration and permeation percentages of mupirocin were very low (1.172 ± 0.202% and 0.161 ± 0.136%) indicating the suitability of nanogels for dermal use against superficial skin infections. The microbiological studies pointed out the effectiveness of nanogels against Staphylococcus aureus strains. Nanogels did not show toxicity signs and the cell binding capacity of radiolabeled formulations was found to be higher than [^99mTc]NaTcO₄ to CCD-1070Sk cell line. Overall, mupirocin nanogels might be considered as a potential and safe topical treatment option for bacterial skin infections.

Chitosan/alginate/hyaluronic acid polyelectrolyte composite sponges crosslinked with genipin for wound dressing application

Wound dressing composed of polyelectrolyte complexes (PECs), based on chitosan/alginate/hyaluronic acid (CS/ALG/HYA) crosslinked by genipin, was prepared by freeze-dried molding. Genipin as excellent natural biological crosslinker was chose for high biocompatibility and improving mechanical properties of materials. The CS/ALG/HYA sponges (CAHSs) were characterized by FTIR, XRD, DSC and SEM. Porosity, swelling behavior and mechanical properties and in vitro degradation of CAHSs were investigated. The cytotoxicity assay was carried out on HUVEC cells in vitro and the result proves the good biocompatibility of CAHSs. Hemolysis tests indicated that the prepared CAHSs were non-hemolytic material (hemolysis ratio < 5%, no cytotoxicity). PT and aPPT coagulation tests demonstrated that CAHS2 and CAHS3 could both activate the extrinsic and intrinsic coagulation pathway and thus accelerated blood coagulation. Further, in a rat full-thickness wounds model, the CAHS2 sponge significantly facilitates wound closure compared to other groups. CAHSs exhibited adjustable physical, mechanical and biological properties. Thus, the chitosan-based polyelectrolyte composite sponges exhibit great potential as promising wound dressings.

Insight into chitosan/zeolite-A nanocomposite as an advanced carrier for levofloxacin and its anti-inflammatory properties; loading, release, and anti-inflammatory studies

Chitosan/zeolite-A nanocomposite (CH/ZA) was synthesized as a potential carrier for levofloxacin (LVOX) of enhanced technical properties. The CH/ZA composite displayed enhanced loading capacity (425 mg/g) as compared to chitosan (188.8 mg/g) and zeolite-A (234.6 mg/g). The loading behavior follows Pseudo-Second-order and Langmuir as kinetic and isotherm models. The equilibrium studies, Gaussian energy (8.15 KJ/mol), and thermodynamic parameters demonstrate homogenous and monolayer loading by complex chemical and physical reactions that are of spontaneous and exothermic nature. The CH/ZA composite is of slow and continuous release profile (200h) with 94.3% as the maximum release percentage. The release reactions are of non-Fickian behavior involving both diffusion and erosion mechanisms. The loading of LVOX into CH/ZA induced its anti-inflammatory effect against the cytokine production (IL-6 and IL-8) within the human bronchial epithelia cells (NL20). The cytotoxicity studies on the normal cells demonstrated a high safety value for the composite.

Promising nanogels loaded with usnic acid for oral ulcer treatment: development, characterization, and in vivo evaluation in rabbits

This study aimed to present an effective formulation targeting oral ulcers that will remain in the application site for a longer period, reducing the frequency of administration. As a candidate formulation, usnic acid (UA) was loaded into the optimum nanogels. The characterization studies included physical, rheological, and bioadhesive properties as well as in vitro release and ex vivo studies. The rheological results revealed that the nanogels present pseudoplastic flow behavior. In vitro drug release showed a prolonged pattern. In further, the chosen UA nanogels showed very low percentages of penetration and permeation. F13, which showed the highest release, suitable bioadhesive properties (0.475 ± 0.033 N/cm²) and eligible particle size (250.22 ± 4.11 nm), PDI (0.089 ± 0.052), and zeta potential (20.56 ± 0.330 mV) values were chosen for in vivo experiments. The selected UA nanogels showed effective antimicrobial activity against Bacillus Cereus and great in vivo wound healing properties. The results indicated that suitable UA nanogels with desired properties could be prepared. The therapeutic potential of the nanogels for oral ulcers was assessed using an animal model and the histopathological findings suggested that the optimized formulation is a good choice for oral ulcer treatment. Nonetheless, further research is recommended to support its efficacy by applying pharmacodynamic and pharmacokinetic studies in human individuals.

An Alternative Approach Wound Healing Field with Polypodium Vulgare

OBJECTIVE

In this study, we examined the effects of Polypodium vulgare L. (Polypodiaceae) as a candidate to be used for wound healing scarred area. We investigated the antibacterial, and antioxidant activity of P. Vulgare on both in vivo, and in vitro wound healing using an excisional wound model in mice.

METHOD

We used 32 Balb-c mice equally divided into four groups: Group 1 control, Group 2 vehicle, Group 3 Polypodium vulgare, and Group 4 Centella asiatica extract (CAE). All treatments were applied topically once in a day. The scar area, percentage wound closure and epithelization time were measured. PDGF, VEGF, and collagen immunohistochemical staining were used for evaluation.

RESULTS

CAE and P. vulgare extract groups were observed to be more effective than the control and vehicle groups in terms of new vascular, epidermal and granulation tissue organization. PDGF, VEGF, and collagen immunohistochemical staining was stronger in the P.vulgare extract and CAE groups compared to the control and vehicle groups. In the P. vulgare and CAE groups, PDGF staining intensity was stronger than the control and vehicle groups, but VEGF and collagen staining in P. vulgare group was not different from the control group.

CONCLUSION

P. vulgare had an effect on the injured area by regenerating the epidermis and increasing vascularization. P. vulgare extract with known antioxidant, and antimicrobial activities may be helpful as a supportive treatment in wound healing.

Recent trends on wound management: New therapeutic choices based on polymeric carriers

Wound healing is an unmet therapeutic challenge among medical society since wound assessment and management is a complex procedure including several factors playing major role in healing process. Wounds can mainly be categorized as acute or chronic. It is well referred that the acute wound displays normal wound physiology while healing, in most cases, is seemed to progress through the normal phases of wound healing. On the other hand, a chronic wound is physiologically impaired. The main problem in wound management is that the majority of wounds are colonized with microbes, whereas this does not mean that all wounds will be infected. In this review, we address the problems that clinicians face to manage while treat acute and chronic wounds. Moreover, we demonstrate the pathophysiology, etiology, prognosis and microbiology of wounds. We further introduce the state of art in pharmaceutical technology field as part of wound management aiming to assist health professionals to overcome the current implications on wound assessment. In addition, authors review researches which included the use of gels and dermal films as wound healing agents. It can be said that natural and synthetic drugs or carriers provide promising solutions in order to meet the wound management standards. However, are the current strategies as desirable as medical society wish?

Microencapsulation of Fluticasone Propionate and Salmeterol Xinafoate in Modified Chitosan Microparticles for Release Optimization

Chitosan (CS) is a natural polysaccharide, widely studied in the past due to its unique properties such as biocompatibility, biodegradability and non-toxicity. Chemical modification of CS is an effective pathway to prepare new matrices with additional functional groups and improved properties, such as increment of hydrophilicity and swelling rate, for drug delivery purposes. In the present study, four derivatives of CS with trans-aconitic acid (t-Acon), succinic anhydride (Succ), 2-hydroxyethyl acrylate (2-HEA) and acrylic acid (AA) were prepared, and their successful grafting was confirmed by FTIR and ¹H-NMR spectroscopies. Neat chitosan and its grafted derivatives were fabricated for the encapsulation of fluticasone propionate (FLU) and salmeterol xinafoate (SX) drugs, used for chronic obstructive pulmonary disease (COPD), via the ionotropic gelation technique. Scanning electron microscopy (SEM) micrographs demonstrated that round-shaped microparticles (MPs) were effectively prepared with average sizes ranging between 0.4 and 2.2 μm, as were measured by dynamic light scattering (DLS), while zeta potential verified in all cases their positive charged surface. FTIR spectroscopy showed that some interactions take place between the drugs and the polymeric matrices, while X-ray diffraction (XRD) patterns exhibited that both drugs were encapsulated in MPs’ interior with a lower degree of crystallinity than the neat drugs. In vitro release studies of FLU and SX exposed a great amelioration in the drugs’ dissolution profile from all modified CS’s MPs, in comparison to those of neat drugs. The latter fact is attributed to the reduction in crystallinity of the active substances in the MPs’ interior.

Highly ordered functionalized mesoporous silicate nanoparticles reinforced poly (lactic acid) gatekeeper surface for infection treatment

The controlled release of a drug considers the key feature of the delivery carrier that enhances therapeutic efficacy. This study was aimed at design, synthesis of nano valve and capping systems onto caged functionalized mesoporous silica nanoparticles (SBA15) with nanoflowers polylactic acid (PLA-NF). Levofloxacin (LVX) as a specific model drug was encapsulated onto series; SBA15, SBA15@NH2, and SBA15@NH2/PLA. The examined nanocarriers released in a controlled fashion by external stimuli. The delivery vehicle based on PLA-NF coated SBA15@NH2, potent conjugated with LVX with experienced a high extent of trapping content with fast releasing by pH regulating mechanism. In vial LVX released profile and in vitro antifungal forceful of the selected microbes were detected. However, SBA15@NH2/PLA exhibited pore size, surface area and pore volume 5.4 nm, 163 and 0.011 respectively, but the significantly clear zone was obtained with Staphylococcus aureus ATCC 6538 (G+ve), Escherichia coli ATCC 25922 (G-ve), Candida albicans ATCC 10231 (yeast) and Aspergillus niger NRRL A-326 (fungus). Viability test avouch that rising functionality enhanced cytocompatibility and non-toxicity profile. Based on the aforementioned promising data, this type of nanocarriers offers when functionalized with targeting cells, the accessibility to deliver antibiotics onto nanosystem for increased potency against microbes and reduce side effects.

Innovative Skin Product Emulsions with Enhanced Antioxidant, Antimicrobial and UV Protection Properties Containing Nanoparticles of Pure and Modified Chitosan with Encapsulated Fresh Pomegranate Juice

In the present study, a chitosan (CS) derivative with the 2-(Methacryloyloxy)ethyl]dimethyl-(3-sulfopropyl)ammonium hydroxide (SDAEM) zwitterionic monomer was prepared through chemical modification. The successful synthesis of CS-SDAEM was confirmed by Fourier-transform Infrared (FTIR) and Nuclear Magnetic Resonance (¹H-NMR) spectroscopies. Its crystallinity was studied by X-ray Diffraction (XRD), while in vitro cytotoxicity and cell viability assays established its biocompatibility. Filtered fresh pomegranate juice (PJ) was loaded in nanoparticles of neat CS and its derivative via ionic gelation method. Dynamic Light Scattering (DLS) revealed nanoparticles sizes varying between 426 nm and 4.5 μm, indicating a size-dependence on the polymer concentration used during encapsulation. High-performance liquid chromatography coupled with photodiode array and electrospray ionization mass spectrometry detection (LC-PDA-ESI/MS) revealed that PJ active compounds were successfully and in sufficient amounts encapsulated in the nanoparticles interior, whereas XRD indicated a crystalline structure alteration after nanoencapsulation. The resulted PJ-loaded nanoparticles were further utilized for the preparation of innovative O/W cosmetic emulsions. All produced emulsions exhibited good pH and viscosity stability for up to 90 days, while the sun protection factor (SPF) was enhanced due to the presence of the PJ. Enhanced antioxidant and antimicrobial properties due to the phenolic compounds of PJ were also observed.

Chitosan Derivatives with Mucoadhesive and Antimicrobial Properties for Simultaneous Nanoencapsulation and Extended Ocular Release Formulations of Dexamethasone and Chloramphenicol Drugs

The aim of this work was to evaluate the effectiveness of neat chitosan (CS) and its derivatives with 2-acrylamido-2-methyl-1-propanesulfonic acid (AAMPS) and [2-(methacryloyloxy)ethyl]dimethyl-(3-sulfopropyl)ammonium hydroxide (MEDSP) as appropriate nanocarriers for the simultaneous ocular administration of dexamethasone sodium phosphate (DxP) and chloramphenicol (CHL). The derivatives CS-AAMPS and CS-MEDSP have been synthesized by free-radical polymerization and their structure has been proved by Fourier-Transformed Infrared Spectroscopy (FT-IR) spectroscopy. Both derivatives exhibited low cytotoxicity, enhanced mucoadhesive properties and antimicrobial activity against Staphylococcus aureus (S.aureus) and Escherichia coli (E. coli). Encapsulation was performed via ionic crosslinking gelation using sodium tripolyphosphate (TPP) as the crosslinking agent. Dynamic light scattering measurements (DLS) showed that the prepared nanoparticles had bimodal distribution and sizes ranging from 50–200 nm and 300–800 nm. Drugs were encapsulated in their crystalline (CHL) or amorphous (DexSP) form inside nanoparticles and their release rate was dependent on the used polymer. The CHL dissolution rate was substantially enhanced compared to the neat drug and the release time was extended up to 7 days. The release rate of DexSP was much faster than that of CHL and was prolonged up to 3 days. Drug release modeling unveiled that diffusion is the main release mechanism for both drugs. Both prepared derivatives and their drug-loaded nanoparticles could be used for extended and simultaneous ocular release formulations of DexSP and CHL drugs.

In Vivo Wound Healing and In Vitro Anti-Inflammatory Activity Evaluation of Phlomis russeliana Extract Gel Formulations

The air-dried aerial parts of Phlomis russeliana (Sims) Lag. Ex Benth. was extracted by methanol and fractionated by n-hexane, dichloromethane, and ethyl acetate, respectively. The wound healing properties of P. russeliana extract gel was evaluated using the in vivo excisional wound model using Balb-c mice. Initially, the P. russeliana methanol extract showed LOX inhibitory activity at IC50 = 23.2 µg/mL, whereas the DPPH• assay showed IC50 = 0.89 mg/mL, and the ABTS• assay showed IC50 = 0.99 mg/mL, respectively. In addition, a remarkable anti-inflammatory activity was observed in the cell culture assay. Thereafter, activity-guided fractionation was performed by LOX enzyme inhibition assays, and the structures of the two most active fractions were revealed by both GC-FID and GC/MS analyses, simultaneously. Phytol and 1-heptadecanoic acid were characterized as the active constituents. Moreover, the P. russeliana extract gel formulation was applied for in vivo tests, where the new gel formulation supported the in vitro anti-inflammatory activity findings. As a conclusion, this experimental results support the wound healing evidence based on the ethnobotanical application of Phlomis species with further potential.

Augmented healing of full thickness chronic excision wound by rosmarinic acid loaded chitosan encapsulated graphene nanopockets

Nanoparticles have emerged as an important carrier system to treat wounds as they permit the topical administration of an antimicrobial drug in a sustained and effective manner. On the other hand, if active excipients are added during the formulation, such as chitosan or graphene oxide, the developed Nano formulation could significantly improve its potential for chronic wound healing. Given that, we have conceived the fabrication and evaluation of rosmarinic acid loaded chitosan encapsulated graphene nanoparticles (RA-CH-G-NPOs) formulation to enhance wound healing capacity. The prepared nanoparticles were characterized by particle size, Zeta potential, FT-IR, SEM, TEM and AFM. It was observed the average diameter of RA-CH-G-NPOS is around 417.5 ± 18.3 nm and showed sustained release behavior. Optimized RA-CH-G-NPOs were incorporated into Carbopol gel and evaluated for drug content, pH, in vitro release, texture analysis, and viscosity. The antibacterial activity of optimized formulation was examined as a minimum inhibitory concentration against Staphylococcus aureus. The fabricated RA-CH-G-NPOs were than evaluated for in vitro antimicrobial activity by microdilution assay The combination of RA, Chitosan and Graphene oxide (GO) showed higher antibacterial activity of 0.0038 ± 0.2 mg/mL. Further, these nanoparticles were evaluated in- vivo for wound healing efficacy in Sprague Dawley rats. Histopathological evaluations demonstrated that RA-CH-G-NPOs showed significantly enhanced wound contraction, enhanced cell adhesion, epithelial migration, and high hydroxyproline content leading to faster and more efficient collagen synthesis as compared to plain carbopol, plain RA and controls. Hence the topical administration of fabricated RA-CH-G-NPOs appears to be an interesting and suitable strategy for the treatment of chronic wounds.

Chitosan and phospholipid assisted topical fusidic acid drug delivery in burn wound: Strategies to conquer pharmaceutical and clinical challenges, opportunities and future panorama

Burn is the immense public health issue globally. Low and middle income countries face extensive deaths owing to burn injuries. Availability of conventional therapies for burns has always been painful for patients as well as expensive for our health system. Pharmaceutical experts are still searching reliable, cheap, safe and effective treatment options for burn injuries. Fusidic acid is an antibiotic of choice for the management of burns. However, fusidic acid is encountering several pharmaceutical and clinical challenges like poor skin permeability and growing drug resistance against burn wound microbes like Methicillin resistant Staphylococcus aureus (MRSA). Therefore, an effort has been made to present a concise review about molecular pathway followed by fusidic acid in the treatment of burn wound infection in addition to associated pros and cons. Furthermore, we have also summarized chitosan and phospholipid based topical dermal delivery systems customized by our team for the delivery of fusidic acid in burn wound infections on case-to-case basis. However, every coin has two sides. We recommend the integration of in-silico docking techniques with natural biomacromolecules while designing stable, patient friendly and cost effective topical drug delivery systems of fusidic acid for the management of burn wound infection as future opportunities.

Tazarotene-loaded in situ gels for potential management of psoriasis: biocompatibility, anti-inflammatory and analgesic effect

Psoriasis is a chronic autoinflammatory disorder characterized by patches of abnormal skin. For psoriasis management, the application of topical retinoids as Tazarotene is recommended. However, Tazarotene could induce skin irritation limiting its use. Herein, it is evaluated the possible usage of in situ gels for tazarotene skin delivery. The topical in situ gels were developed using thermosensitive poloxamers via cold method. They were examined for their appearance, sol-gel temperature, clarity, pH, viscosity, in vitro release, and stability. Their biocompatibility was evaluated by investigating their cytotoxicity and irritation inducing capacity. The possible anti-inflammatory and analgesic activities were determined by measuring the nitric oxide and prostaglandin E₂ levels production in LPS-stimulated RAW264.7 murine macrophage cells. It was revealed that the in situ gels had no cytotoxic effect (∼95-100% cell viability) and nor irritation potential (∼97% cell viability), according to the in vitro EpiDerm™ reconstituted skin irritation test. Additionally, the 10% tazarotene-in situ gels showed possible analgesic activity since the production of prostaglandin E₂ (PGE₂) was decreased. In further, both concentrations of 5% and 10% tazarotene-in situ gels inhibited significantly the nitrite oxide production at 16% and 19%, respectively. Finally, the prepared in situ gels can act as a potential non-irritant alternative option for tazarotene topical skin delivery.

Marine-Derived Polymeric Materials and Biomimetics: An Overview

The review covers recent literature on the ocean as both a source of biotechnological tools and as a source of bio-inspired materials. The emphasis is on marine biomacromolecules namely hyaluronic acid, chitin and chitosan, peptides, collagen, enzymes, polysaccharides from algae, and secondary metabolites like mycosporines. Their specific biological, physicochemical and structural properties together with relevant applications in biocomposite materials have been included. Additionally, it refers to the marine organisms as source of inspiration for the design and development of sustainable and functional (bio)materials. Marine biological functions that mimic reef fish mucus, marine adhesives and structural colouration are explained.