Synthesis and characterization of new chitosan-based Schiff base compounds

8-Aminoquinoline derived two Schiff base platforms: Synthesis, characterization, DFT insights, corrosion inhibitor, molecular docking, and pH-dependent antibacterial study

The current research divulges the synthesis of two new Schiff base (SB) (L NAPH /L O-VAN ) derived from 8-aminoquinoline (8-AMQ) in the presence of 2-hydroxy naphthaldehyde (NAPH) and ortho-vanillin (O-VAN) in CH3OH solvent. They are structurally characterized by spectroscopic methods (IR/Raman/UV-vis/DRS/NMR) and SEM-EDX. SB compounds have a biologically active avenue of azomethine/imine group (H-C=N) that can donate N e's to Mn + ions, showing coordinating flexibility. The -OH and imine (H-C=N) groups are stable in air, light, and alkalis but undergo acidic environments hydrolysis, separating -NH2 and carbonyl compounds. Moreover, buffer solutions with a pH range of 4-6 release aldehyde. Molecular electrostatic potential (MEP), Frontier molecular orbitals (FMO), Fukui function, and Non-linear optical (NLO) were conducted to elucidate SBs chemical potency, optoelectronic significance, and corrosion inhibitor. Accordingly, the calculated ΔE of FMO for L NAPH and L O-VAN is 3.82 and 4.08 eV, ensuring potent biological function. DFT supported the experimental and theoretical IR spectral correlation to enrich better structural insights. NLO-based polarizability (α) and hyperpolarizability (β) factors successfully explore the potential optoelectronic significance. Molecular docking experiments were simulated against DNA, anti-COVID-19, and E. coli. The potential microbiological activity was screened against the bacterial strains E. coli, Klebsiella, Bacillus, and Pseudomonas sp. based on zone of inhibition and MIC values. These experiments also explored the fact that L NAPH and L O-VAN discourage microbial cell biofilms and corrosion. We extensively covered the as-prepared compounds' pH-dependent bacterial effects.

Synthesis of novel chitosan-Schiff bases nanoparticles for high efficiency Helicobacter pylori inhibition

Two chitosan Schiff bases were synthesized by condensation of chitosan with 2-(4-formylphenoxy)-N-phenylacetamide and N-(4-bromophenyl)-2-(4-formylphenoxy) acetamide denoted as Cs-SBA and Cs-SBBr, respectively. The molecular structures of the resulting chitosan derivatives were characterized using FTIR and 1HNMR and their thermal properties were investigated by TGA. These derivatives were treated with sodium tripolyphosphate (TPP) to produce Cs Schiff base nanoparticles. The nanoparticles physicochemical properties were determined by FTIR, XRD, TEM, and zeta potential analysis. The antimicrobial action against Helicobacter pylori (H. pylori) was evaluated and the results indicated that the anti-H. pylori activity had minimal inhibitory concentration MIC values of 15.62 ± 0.05 and 3.9 ± 0.03 μg/mL for Cs-SBA and Cs-SBBr nanoparticles (Cs-SBA NPs and Cs-SBBr NPs), respectively. The better biologically active nanoparticles, Cs-SBBr NPs, were tested for their cyclooxygenases (COX-1 and COX-2) inhibitory potential. Cs-SBBr NPs demonstrated COX enzyme inhibition activity against COX-2 (IC50 4.5 ± 0.165 μg/mL) higher than the conventional Indomethacin (IC50 0.08 ± 0.003 μg/mL), and Celecoxib (IC50 0.79 ± 0.029 μg/mL). Additionally, the cytotoxicity test of Cs-SBBr NPs showed cytotoxic effect on Vero cells (CCL-81) with IC50 = 17.95 ± 0.12 μg/mL which is regarded as a safe compound. Therefore, Cs-SBBr NPs may become an alternative to cure H. pylori and prevent gastric cancer.

Revisiting the Determination of the Degree of Deacetylation Using Potentiometric Titration: A New Equation for Modified Chitosan

Chitosan is a biopolymer that can be subjected to a variety of chemical modifications to generate new materials. The properties of modified chitosan are affected by its degree of deacetylation (DDA), which corresponds to the percentage of D-glucosamine monomers in its polymeric structure. Potentiometric titration is amongst the simplest, most readily available, and most cost-effective methods of determining the DDA. However, this method often suffers from a lack of precision, especially for modified chitosan resins. This is in large part because the equation used to calculate the DDA does not consider the molecular weight of the chemically modified monomeric units. In this paper, we introduce a new equation that is especially suited for modified chitosan bearing three different types of monomers. To test this equation, we prepared naphthalene-chitosan resins and subjected them to potentiometric titration. Our results show that our new equation, which is truer to the real structure of the polymeric chains, gives higher DDA values than those of the routinely used equations. These results show that the traditional equations underestimate the DDA of modified chitosan resins.

Immobilization of Horseradish Peroxidase onto Montmorillonite/Glucosamine-Chitosan Composite for Electrochemical Biosensing of Polyphenols

Glucosamine-chitosan synthesized by the Maillard reaction was combined with montmorillonite to obtain a nanohybrid composite to immobilize horseradish peroxidase. The material combines the advantageous properties of clay with those of the chitosan derivative; has improved water solubility and reduced molecular weight and viscosity; involves an eco-friendly synthesis; and exhibits ion exchange capacity, good adhesiveness, and a large specific surface area for enzyme adsorption. The physicochemical characteristics of the composite were analyzed by infrared spectroscopy and X-ray diffraction to determine clay-polycation interactions. The electrochemical response of the different polyphenols to glassy carbon electrodes modified with the composite was evaluated by cyclic voltammetry. The sensitivity and detection limit values obtained with the biosensor toward hydroquinone, chlorogenic acid, catechol, and resorcinol are (1.6 ± 0.2) × 102 µA mM-1 and (74 ± 8) nM; (1.2 ± 0.1) × 102 µA mM-1 and (26 ± 3) nM; (16 ± 2) µA mM-1 and (0.74 ± 0.09) μM; and (3.7± 0.3) µA mM-1 and (3.3 ± 0.2) μM, respectively. The biosensor was applied to quantify polyphenols in pennyroyal and lemon verbena extracts.

The utilization of chitosan/Bletilla striata hydrogels to elevate anti-adhesion, anti-inflammatory and pro-angiogenesis properties of polypropylene mesh in abdominal wall repair

Polypropylene (PP) mesh is commonly used in abdominal wall repair due to its ability to reduce the risk of organ damage, infections and other complications. However, the PP mesh often leads to adhesion formation and does not promote functional tissue repair. In this study, we synthesized one kind of aldehyde Bletilla striata polysaccharide (BSPA) modified chitosan (CS) hydrogel based on Schiff base reaction. The hydrogel exhibited a porous network structure, a highly hydrophilic surface and good biocompatibility. We wrapped the PP mesh inside the hydrogel and evaluated the performance of the resulting composites in a bilateral 1 × 1.5 cm abdominal wall defect model in rats. The results of gross observation, histological staining and immunohistochemical staining demonstrated the positive impact of the CS hydrogel on anti-adhesion and wound healing effects. Notably, the addition of BSPA to the CS hydrogel further improved the performance of the composites in vivo, promoting wound healing by enhancing collagen deposition and capillary rearrangement. This study suggested that the BSPA-modified CS hydrogel significantly promoted the anti-adhesion, anti-inflammatory and pro-angiogenesis properties of PP meshes during the healing process. Overall, this work offers a novel approach to the design of abdominal wall repair patches.

Bactericidal Chitosan Derivatives and Their Superabsorbent Blends with ĸ-Carrageenan

The aim of this work is research dedicated to the search for new bactericidal systems for use in cosmetic formulations, dermocosmetics, or the production of wound dressings. Over the last two decades, chitosan, due to its special biological activity, has become a highly indispensable biopolymer with very wide application possibilities. Reports in the literature on the antibacterial effects of chitosan are very diverse, but our research has shown that they can be successfully improved through chemical modification. Therefore, in this study, results on the synthesis of new chitosan-based Schiff bases, dCsSB-SFD and dCsSB-PCA, are obtained using two aldehydes: sodium 4-formylbenzene-1,3-disulfonate (SFD) and 2-pyridine carboxaldehyde (PCA), respectively. Chitosan derivatives synthesized in this way demonstrate stronger antimicrobial activity. Carrying out the procedure of grafting chitosan with a caproyl chain allowed obtaining compatible blends of chitosan derivatives with κ-carrageenan, which are stable hydrogels with a high swelling coefficient. Furthermore, the covalently bounded poly(ε-caprolactone) (PCL) chain improved the solubility of obtained polymers in organic solvents. In this respect, the Schiff base-containing polymers obtained in this study, with special hydrogel and antimicrobial properties, are very promising materials for potential use as a controlled-release formulation of both hydrophilic and hydrophobic drugs in cosmetic products for skin health.

Chitosan-based Schiff bases: Promising materials for biomedical and industrial applications

There is plenty of scope for modifying chitosan, an only polycationic natural polysaccharide, owing to its reactive functional groups, namely hydroxyl and amino groups. Although innumerable numbers of chitosan derivatives have been synthesized by modifying these groups and reported elsewhere, in this review article, an attempt has been exclusively made to demonstrate the syntheses of various chitosan-based Schiff bases (CSBs) simply by allowing the reactions of reactive amino groups of chitosan with different aldehydes/ketones of interest. Due to their very peculiar and unique characteristics, such as biodegradability, biocompatibility, metal-binding capability, etc., they are found to be very useful for diversified applications. Thus, we have also attempted to showcase their very specific biomedical fields, including tissue engineering, drug delivery, and wound healing, to name a few. In addition, we have also discussed the utilization of CSBs for industrial applications such as wastewater treatment, catalysis, corrosion inhibition, sensors, etc.

A review study on green synthesis of chitosan derived schiff bases and their applications

Chitosan is a bio-degradable, bio-compatible, non-toxic, and renewable biopolymer. The reactive amino group of chitosan has gained importance because using these amino groups can help achieve the different types of structural modification in chitosan. Chemical modification of chitosan via imine functionalization results in the formation of a chitosan Schiff base. The present review covers the green synthesis of chitosan Schiff bases using non-conventional green methods such as microwave irradiation, green solvent, ultrasound irradiation, and one-pot synthesis. These methods are energy-efficient and greener versions of the conventional condensation methods. Scientists have paid significant attention to the chitosan Schiff base because of its unique properties and versatility. These molecules display various biological applications, including antioxidant, antimicrobial, anticancer, antibacterial, and anti-fungal. In addition to biological applications, chitosan Schiff base also has other applications like corrosion inhibition, catalysis, metal ion adsorption, and as a sensor. Available literature particularly shows the different methods for the synthesis of chitosan Schiff bases and their different applications. This review gives detailed insight regarding sustainable approaches to the synthesis of chitosan derived Schiff bases and their applications in various emerging fields.

Modern Approaches in Wounds Management

Wound management represents a well-known continuous challenge and concern of the global healthcare systems worldwide. The challenge is on the one hand related to the accurate diagnosis, and on the other hand to establishing an effective treatment plan and choosing appropriate wound care products in order to maximize the healing outcome and minimize the financial cost. The market of wound dressings is a dynamic field which grows and evolves continuously as a result of extensive research on developing versatile formulations with innovative properties. Hydrogels are one of the most attractive wound care products which, in many aspects, are considered ideal for wound treatment and are widely exploited for extension of their advantages in healing process. Smart hydrogels (SHs) offer the opportunities of the modulation physico-chemical properties of hydrogels in response to external stimuli (light, pressure, pH variations, magnetic/electric field, etc.) in order to achieve innovative behavior of their three-dimensional matrix (gel-sol transitions, self-healing and self-adapting abilities, controlled release of drugs). The SHs response to different triggers depends on their composition, cross-linking method, and manufacturing process approach. Both native or functionalized natural and synthetic polymers may be used to develop stimuli-responsive matrices, while the mandatory characteristics of hydrogels (biocompatibility, water permeability, bioadhesion) are preserved. In this review, we briefly present the physiopathology and healing mechanisms of chronic wounds, as well as current therapeutic approaches. The rational of using traditional hydrogels and SHs in wound healing, as well as the current research directions for developing SHs with innovative features, are addressed and discussed along with their limitations and perspectives in industrial-scale manufacturing.

Architecting fire safe hierarchical polymer nanocomposite films with excellent electromagnetic interference shielding via interface engineering

Integrating high flame retardancy and excellent electromagnetic interference (EMI) shielding into polymetric materials is extremely necessary, and well dispersing conductive fillers into polymeric materials is still a great challenge because of incompatible interfacial polarity between polymer matrix and conductive fillers. Therefore, under the premise of maintaining integral conductive films in the process of hot compression, constructing a novel EMI shielding polymer nanocomposites where conductive films closely adhere to polymer nanocmposites layers should be a fascinating stratety. In this work, salicylaldehyde-modified chitosan decorated titanium carbide nanohybrid (Ti₃C₂T_x-SCS) was combined with piperazine-modified ammonium polyphosphate (PA-APP) to fabricate thermoplastic polyurethane (TPU) nanocomposites, which were used for construction of hierarchical nanocomposite films by inserting reduced graphene oxide (rGO) films into TPU/PA-APP/Ti₃C₂T_x-SCS nanocomposite layers through our self-developed air assisted hot pressing technique. The total heat release, total smoke release and total carbon monoxide yield for TPU nanocomposite containing 4.0 wt% Ti₃C₂T_x-SCS nanohybrid were 58.0%, 58.4% and 75.8% lower than those of pristine TPU, respectively. Besides, the hierarchical TPU nanocomposite film containing 1.0 wt% Ti₃C₂T_x-SCS presented an averaged EMI shielding effectiveness of 21.3 dB in X band. This work provides a promising strategy for fabricating fire safe and EMI shielding polymer nanocomposites.

Preparation of l-Arginine Schiff Bases Modified Chitosan Derivatives and Their Antimicrobial and Antioxidant Properties

We successfully prepared a series of l-arginine Schiff bases acylated chitosan derivatives, aiming to improve the antioxidant activity and antimicrobial activity of chitosan by introducing a furan ring, pyridine ring, and l-arginine structure. The accuracy of the structures of ten compounds was characterized by FT-IR and 1H NMR. In terms of DPPH radical scavenging activity, except for compound CR3PCA, the scavenging rate of other compounds was higher than chitosan, especially CRCF and CRBF had strong scavenging abilities. At the same time, in the superoxide-radical scavenging activity assay, CRCF, CRBF, CR3PCA, CR2C3PCA, and CR2B3PCA were comparable to positive control at 1.60 mg/mL. Simultaneously, CRFF, CRCF, and CRBF had a certain inhibitory effect on Botrytis cinerea. Furthermore, the inhibitory effect of CRFF, CRCF, and CR3PCA on Staphylococcus aureus was very well, close to the positive control at 1.00 mg/mL. CRCF and CR2B3PCA showed better inhibitory effects on Escherichia coli than other compounds. The MTT assay was used to determine the cytotoxicity of the chitosan derivatives, which proved their safety to fibroblast cells. In summary, the study indicated that some of these compounds have the potential for further development and utilization in the preparation of antioxidants and antimicrobial agents.

Novel Chitosan-Based Schiff Base Compounds: Chemical Characterization and Antimicrobial Activity

Chitosan (CS) and its derivatives are receiving considerable attention for their great biocompatibility and broad-spectrum activities in many fields. In this work, we aimed to characterize the antimicrobial activity of novel chitosan Schiff bases (CSSB). CS was synthesized by double deacetylation of chitin (Cn) after its extraction from the armors of crustaceans Astacus leptodactylus, and CSSB-1 and CSSB-2 were synthesized by interaction of CS with 4-(2-chloroethyl) benzaldehyde (aldehyde-1) and 4-(bromoethyl) benzaldehyde (aldehyde-2), respectively, at room temperature. The synthesized compounds were characterized by elemental analysis, gel permeation chromatography (GPC), infrared spectroscopy (FTIR), thermogravimetry (TG), and differential scanning calorimetry (DSC). The antimicrobial activity against Gram-positive (Staphylococcus aureus) and Gram-negative (Pseudomonas aeruginosa) bacteria and against yeasts (Candida albicans) was significantly increased due to their higher solubility as compared to unmodified CS opening perspectives for the use of these compounds for antimicrobial prevention in different fields as, for example, food industry, cosmetics, or restoration.

Development of a biosponge based on Luffa cylindrica and crosslinked chitosan for Allura red AC adsorption

A new bioadsorbent from Luffa cylindrica and cross-linked chitosan was proposed in the present study. Luffa was used as a natural support medium for chitosan crosslinked with glutaraldehyde (LCsG) and epichlorohydrin (LCsE). Biosponges were applied to remove Allura red from aqueous solutions. LCsG and LCsE were produced using different concentrations of chitosan (1%, 3% and 5% (m v^-1)) and crosslinking agents (0.5%, 1.0% and 1.5% (v v^-1)). Based on the FT-IR spectra, functional groups characteristic of chitosan crosslinked with glutaraldehyde and epichlorohydrin confirmed the crosslinking. In addition, the biosorbent revealed highly efficient functional groups and morphology with irregularities favorable for adsorption. It was found that the increase in the percentage of glutaraldehyde and epichlorohydrin increased the sample's swelling degree, and the degree of cross-linking was greater than 80% for all LCsG. The results regarding the degree of swelling and degree of crosslinking corroborated with the evaluation of the biosponge's adsorptive potential. The Sips model predicted the equilibrium isotherms, with a maximum adsorption capacity of 89.05 mg g^-1 for LCsG and 60.91 mg g^-1 for LCsE. The new procedure was successful. Luffa was excellent support for chitosan, resulting in an attractive, low-cost bioadsorbent, preventing renewable sources.

Optimization of Chitosan Properties with the Aim of a Water Resistant Adhesive Development

Chitosan is a bio-sourced polysaccharide widely used in different fields from health to wastewater treatment through food supplements. Another important use of this polymer is adhesion. Indeed, the current demand to replace non-natural and hazardous polymers by greener ones is well present in the adhesive field and open good opportunities for chitosan and its derivatives. However, chitosan is water soluble and exhibits a poor water-resistance in the field of adhesion which reduces the possibilities of its utilization within the paste field. This review focuses on exploration of different ways available to modify the chitosan and transform it into a water-resistant adhesive. The first part concerns the chitosan itself and gives important information from the discovery of chitin to the pure chitosan ready to use. The second part reviews the background information relative to adhesion theories, ideal properties of adhesives and the characteristics of chitosan as an adhesive. The last part focuses on exploration of the possible modification of chitosan to make it a water-resistant chemical adhesive.

A structure-supporting, self-healing, and high permeating hydrogel bioink for establishment of diverse homogeneous tissue-like constructs

The ready-to-use, structure-supporting hydrogel bioink can shorten the time for ink preparation, ensure cell dispersion, and maintain the preset shape/microstructure without additional assistance during printing. Meanwhile, ink with high permeability might facilitate uniform cell growth in biological constructs, which is beneficial to homogeneous tissue repair. Unfortunately, current bioinks are hard to meet these requirements simultaneously in a simple way. Here, based on the fast dynamic crosslinking of aldehyde hyaluronic acid (AHA)/N-carboxymethyl chitosan (CMC) and the slow stable crosslinking of gelatin (GEL)/4-arm poly(ethylene glycol) succinimidyl glutarate (PEG-SG), we present a time-sharing structure-supporting (TSHSP) hydrogel bioink with high permeability, containing 1% AHA, 0.75% CMC, 1% GEL and 0.5% PEG-SG. The TSHSP hydrogel can facilitate printing with proper viscoelastic property and self-healing behavior. By crosslinking with 4% PEG-SG for only 3 min, the integrity of the cell-laden construct can last for 21 days due to the stable internal and external GEL/PEG-SG networks, and cells manifested long-term viability and spreading morphology. Nerve-like, muscle-like, and cartilage-like in vitro constructs exhibited homogeneous cell growth and remarkable biological specificities. This work provides not only a convenient and practical bioink for tissue engineering, targeted cell therapy, but also a new direction for hydrogel bioink development.

Eco-friendly chitosan Schiff base as an efficient sensor for trace anion detection

Herein, a chitosan Schiff base sample (CSAN) was strategically designed and prepared via a two-step process. In the first step, an azo derivative of 1- naphthylamine namely, [2-hydroxy-5-(naphthalene-1-yldiazenyl) benzaldehyde] (HNDB) was synthesized as an aldehyde moiety. Then the condensation reaction of HNDB with chitosan afforded CSAN as the target product. Structural analyses of synthesized material were accomplished through FT-IR, ¹H NMR, UV-Vis, XRD, TGA, and SEM spectral methods. Meanwhile, the heterogeneous CSAN was able to detect the presence of hydrogen carbonate (HCO₃^-), acetate (AcO^-), and cyanide (CN^-) anions in semi-aqueous media (H₂O/DMSO; 10:90%, v/v). Moreover, the selectivity of CSAN towards CN^- anion was increased through variation in solvent mixture ratios. Thereupon, CSAN was explored as a promising sensor towards CN^- anion in an aqueous media through considerable color variation from colorless to pale yellow as well as quantitative chemical analysis. Overall, reliable CSAN chemosensor with high sensitivity for mentioned anions has a pivotal role in practical applications owing to it's reversibility ability.

Surface functionalization of chitosan with 5-nitroisatin

Several possible configurations (CS/NI1-10) for the surface adsorption of 5-nitroisatin (NI) on the chitosan polymer (CS) were investigated using quantum mechanical methods in the gas and solution phases. The values of the binding energies indicate the energetic stability of these configurations. The solvation energies demonstrate that the solubility of NI and CS increases in the presence of each other. The role of hydrogen bonds in noncovalent surface functionalization was determined by AIM analysis. The mechanism of covalent surface functionalization and the explicit solvent effects (methanol) in this mechanism were investigated and it was determined that the covalent functionalization through Schiff base formation is possible. These findings, in addition to the biological applications of the chitosan Schiff bases and their complexes, led us to synthesize a new Schiff base from condensation reaction of CS and NI (CSB) together with its Ni(II) and Cu(II) complexes. The synthesized compounds were characterized by the elemental analysis, infrared spectroscopy (IR), thermogravimetry analysis (TGA) and differential scanning calorimetry (DSC). Also, optimized geometries, assignment of the IR vibrational bands as well as exploring of the frontier orbitals of the synthesized compounds have been calculated using density functional levels of theory.

Iron oxide/carbon nanotubes/chitosan magnetic composite film for chromium species removal

An adsorbent in the form of a CLCh/MWCNT/Fe film was prepared using multiple walled carbon nanotubes (MWCNT) doped with magnetic iron oxide and deposited in crosslinked chitosan (CLCh). The CLCh/MWCNT/Fe was characterized by Inductively Coupled Plasma Mass Spectrometry (ICP-MS), nitrogen (N₂) adsorption/desorption, X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Energy Dispersive Spectrometry (EDS), Infrared Spectroscopy (IR) and Raman Spectroscopy. The CLCh/MWCNT/Fe film presented a maximum adsorption capacity for Cr(III) of 66.25 mg/g (150 min) and for Cr(VI) of 449.30 mg/g (60 min) at 25 °C. The CLCh/MWCNT/Fe can be easily removed from the aqueous solution by a mechanical separation or by magnetization due to its magnetic properties. In ten consecutive reutilization adsorption cycles the CLCh/MWCNT/Fe film presented efficiency losses of only 12% and 6% for the removal of Cr(III) and Cr(VI), respectively.

A review on applications of chitosan-based Schiff bases

Biopolymers have become very attractive as they are degradable, biocompatible, non-toxic and renewable. Due to the intrinsic reactive amino groups, chitosan is vibrant in the midst of other biopolymers. Using the versatility of these amino groups, various structural modifications have been accomplished on chitosan through certain chemical reactions. Chemical modification of chitosan via imine functionalization (RR'CNR″; R: alkyl/aryl, R': H/alkyl/aryl and R″: chitosan ring) is significant as it recommends the resultant chitosan-based Schiff bases (CSBs) for the important applications in the fields like biology, catalysis, sensors, water treatment, etc. CSBs are usually synthesized by the Schiff condensation reaction between chitosan's amino groups and carbonyl compounds with the removal of water molecules. In this review, we first introduce the available synthetic approaches for the preparation of CSBs. Then, we discuss the biological applications of CSBs including antimicrobial activity, anticancer activity, drug carrier ability, antioxidant activity and tissue engineering capacity. Successively, the applications of CSBs in other fields such as catalysis, adsorption and sensors are demonstrated.

Synthesis, characterization and antifungal efficacy of chitosan derivatives with triple quaternary ammonium groups

A novel type of water soluble chitosan derivatives (TQCSPX) were synthesized including 3-aminopyridine (TQCSP1) and 3-Amino-4-methylpyridine (TQCSP2). The theoretical structures of TQCSPX were calculated by Gaussian 09 and confirmed by FT-IR, ¹H NMR, ¹³C NMR, elemental analysis and XRD. The antifungal properties of TQCSPX against Phytophthora capsici (P. capsici), Rhizoctonia solani (R. solani), Fusarium oxysporum (F. oxysporum) and Fusarium solani (F. solani) were evaluated at concentrations ranging from 0.2mg/mL to 0.8mg/mL. Antifungal results indicated that the derivatives have significantly enhanced antifungal activity after quaternized compared with the original chitosan (CS). Moreover, TQCSP1 inhibited the growth of P. capsici with inhibitory indices of 91.94% at 0.8mg/mL. The experimental results demonstrated that the increasing number of the positive charge would improve the antifungal efficiency of chitosan, which may provide a novel direction for the development of fungicides.

Novel Blend for Producing Porous Chitosan-Based Films Suitable for Biomedical Applications

In this work, a chitosan–gelatin–ferulic acid blend was used in different ratios for preparing novel films that can be used in biomedical applications. Both acetic and formic acid were tested as solvents for the chitosan–gelatin–ferulic acid blend. Glycerol was tested as a plasticizer. The thickness, mechanical strength, static water contact angle and water uptake of the prepared films were determined. Also, the prepared films were characterized using different analysis techniques such as Fourier transform infrared spectroscopy (FT-IR) analysis, X-ray diffraction (XRD), thermal gravimetric analysis (TGA), differential scanning calorimetry (DSC) and scanning electron microscopy (SEM). Acetic acid produced continuous compact surfaces that are not recommended for testing in biomedical applications. The plasticized chitosan–gelatin–ferulic acid blend, using formic acid solvent, produced novel hexagonal porous films with a pore size of around 10–14 µm. This blend is recommended for preparing films (scaffolds) for testing in biomedical applications as it has the advantage of a decreased thickness.

N-[4-(N,N,N-trimethylammonium)benzyl]chitosan chloride: Synthesis, interaction with DNA and evaluation of transfection efficiency

А novel cationic chitosan derivative, N-[4-(N,N,N-trimethylammonium)benzyl]chitosan chloride (TMAB-CS), with different degrees of substitution (DS) was synthesized by a chemoselective interaction of 4-formyl-N,N,N-trimethylanilinium iodide with chitosan amino groups using a reductive amination method. Several factors (pH, reactant ratio, reaction time, and chitosan structure) were studied for their effects on the DS of the resulting TMAB-CS. The obtained derivatives were characterized by ¹H NMR and FTIR spectroscopy. Turbidimetric titration showed enhanced solubility over a wide pH range even for low-substituted TMAB-CS. TMAB-CS provided strong DS-dependent binding of plasmid DNA. Dynamic light scattering measurements revealed the formation of stable polyplexes with hydrodynamic diameters of 200-300nm and ζ-potential of 20-30mV. TMAB-CS with relatively low DS (25%) demonstrated more pronounced transfection efficiency (up to 2000 cell/cm²) of plasmid DNA into the HEK293 cell line promoted by free TMAB-CS. The positive effects of lower DS can be related to a better polyplex dissociation within the cell. The cytotoxicity of TMAB-CS was comparable to that of the initial chitosan at concentrations up to 300ng/μL, even at high DS.

Antibacterial and antioxidative activity of O-amine functionalized chitosan

Cinnamaldehyde was immobilized to O-amine functionalized chitosan via a coupling reaction. Fourier transform infrared spectroscopy confirmed N-cinnamyl substitution. Wetting analyses demonstrate more hydrophobicity in the N-cinnamyl substituted O-amine functionalized chitosan compared to chitosan or unsubstituted O-amine functionalized chitosan. Thermal gravimetric analysis and differential scanning calorimetry demonstrates that the prepared N-cinnamyl substituted O-amine functionalized chitosan exhibits higher thermostability than unmodified chitosan at temperatures in which polysaccharides are commonly stored and utilised. The N-cinnamyl substituted O-amine functionalized chitosan, against four different bacteria strains [two gram-positive (Staphylococcus aureus and Bacillus cereus) and two gram-negative (Escherichia coli and Pseudomonas aeruginosa)], displays promotion of inhibition activity against these bacterial strains. Finally, the antioxidative activity of the N-cinnamyl substituted O-amine functionalized chitosan was compared with those activities of chitosan and O-amine functionalized chitosan. This was evaluated by uninhibited and inhibited hyaluronan degradation and ABTS assay. The N-cinnamyl substituted O-amine functionalized chitosan shows a lower activity towards donating a hydrogen radical compared to chitosan or O-amine functionalized chitosan. On the other hand, the N-cinnamyl substituted O-amine functionalized chitosan exhibited a higher ability to scavenge the ABTS⁺ cation radical compared to chitosan and O-amine functionalized chitosan.

Preparation and characterization of chitosan derivatives and their application as flame retardants in thermoplastic polyurethane

Our previous work has demonstrated that chitosan (CS) can be directly used as charring agents. In this paper, efforts were made to further improve the thermal stability and charring ability of CS by reacting with benzaldehyde, salicylaldehyde and hydroxybenzaldehyde respectively to obtain different CS derivatives. CS derivatives in association with ammonium polyphosphate (APP) was then introduced into thermoplastic polyurethane (TPU) to prepare flame retardant TPU composites. The sample containing 18.75% APP and 6.25% salicylaldehyde modified CS (SCS) achieved the maximal limiting oxygen index of 29.5%, passed the V-0 rating and significantly decreased the peak heat release rate from 840.8kW/m² of neat TPU to 206.2kW/m². Thermogravimetric analysis and char morphology observation demonstrated that SCS/APP could promote the char formation to form more intact intumescent char structure. It was proposed that the synergism between CS derivatives and APP might be responsible for the improvement of flame retardancy.