Nanofibrillated cellulose as an additive in papermaking process: A review

A review on intelligence of cellulose based materials

Cellulose based materials are widely used in various fields such as papermaking, packaging, composite materials, textiles and clothing due to their diverse types, environmental friendliness, natural degradation, high specific strength, and low cost. The intelligence of cellulose based materials will further expand their application fields. This article first gives an in-depth analyzation on the intelligent structural design of these materials according to the two major categories of isotropic and anisotropic, then lists the main preparation methods of cellulose based intelligent materials. Subsequently, this article systematically summarizes the recent intelligent response methods and characteristics of cellulose based materials, and extensively elaborates on the intelligent application of these materials. Finally, the prospects for the intelligence of cellulose based materials are discussed.

Development of antifogging double-layer film using cellulose nanofibers and carboxymethyl chitosan for white Hypsizygus marmoreus preservation

Films with simultaneously excellent mechanical and anti-fog properties are of great importance for food packaging. A novel strategy is described here to prepare long-lasting anti-fog film with antibacterial and antioxidant capabilities via a simple, green approach. The CMC (carboxymethyl chitosan) gel was integrated with CNF/TA (cellulose nanofibers/tannic acid) composite solution based on layer-by-layer assembly to form a membrane with a bilayer structure. The anti-fog performance of the bilayer film could be adjusted by regulating the CNF/TA layer thickness. On the whole, the developed anti-fog film had high mechanical strength and excellent UV shielding properties, as well as good antibacterial and antioxidant properties, and could be non-fogging for a long time under water vapor (40 °C). The effect of double layer anti-fog film (3%CmFT-3) on the fresh-keeping effect of white Hypsizygus marmoreus was compared at room temperature (28 °C) with commercially available anti-fog PVC film. The results showed that the bilayer anti-fog film could effectively prevent the generation of fog, delay the Browning, inhibit mildew, improve the overall acceptability, and effectively extend the shelf life of white Hypsizygus marmoreus. This biomass-based anti-fog film offers great potential for the development of multifunctional green food packaging.

Enzymatic pretreatment for cellulose nanofiber production: Understanding morphological changes and predicting reducing sugar concentration

Enzymatic pretreatment plays a crucial role in producing cellulose nanofibers (CNFs) before fibrillation. While previous studies have explored how treatment severity affects CNF characteristics, there remains a lack of suitable parameters to monitor real-time enzymatic processes and fully comprehend the link between enzymatic action, fibrillation, and CNF properties. This study focuses on evaluating the impact of enzyme charge (using a monocomponent endoglucanase) and treatment time on cellulose fiber morphology and reducing sugar generation. For the first time, a random forest (RF) model is developed to predict reducing sugar concentration based on easily measurable process conditions (e.g., stirrer power consumption) and fiber/suspension characteristics like fines content and apparent viscosity. Polarized light optical microscopy was found to be a suitable technique to evaluate the morphological changes that fibers experience during enzymatic pretreatment. The research also revealed that endoglucanases initially induce surface fibrillation, releasing fine fibers into the suspension, followed by fiber swelling and shortening. Furthermore, the effect of enzymatic pretreatment on resulting CNF characteristics was studied at two fibrillation intensities, indicating that a high enzyme charge and short treatment times (e.g., 90 min) are sufficient to produce CNFs with a nanofibrillation yield of 19-23 % and a cationic demand ranging from 220 to 275 μeq/g. This work introduces a well-modeled enzymatic pretreatment process, unlocking its potential and reducing uncertainties for future upscaling endeavors.

Spherical Polyelectrolyte Brushes as Flocculants and Retention Aids in Wet-End Papermaking

As the criteria of energy conservation, emission reduction, and environmental protection become more important, and with the development of wet-end papermaking, developing excellent retention aids is of great significance. Spherical polyelectrolyte brushes (SPBs) bearing polyelectrolyte chains grafted densely to the surface of core particle have the potential to be novel retention aids in wet-end papermaking not only because of their spherical structure, but also due to controllable grafting density and molecular weight. Such characteristics are crucial in order to design multi-functional retention aids in sophisticated papermaking systems. This review presents some important recent advances with respect to retention aids, including single-component system and dual-component systems. Then, basic theory in papermaking is also briefly reviewed. Based on these advances, it emphatically describes spherical polyelectrolyte brushes, focused on their preparation methods, characterization, conformation, and applications in papermaking. This work is expected to contribute to improve a comprehensive understanding on the composition, properties, and function mechanisms of retention aids, which helps in the further investigation on the design of novel retention aids with excellent performance.

Overexpression of a gibberellin 20-oxidase gene in poplar xylem led to an increase in the size of nanocellulose fibrils and improved paper properties

Cellulose, the major component of secondary cell walls, is the most abundant renewable long-chain polymer on earth. Nanocellulose has become a prominent nano-reinforcement agent for polymer matrices in various industries. We report the generation of transgenic hybrid poplar overexpressing the Arabidopsis gibberellin 20-oxidase1 gene driven by a xylem-specific promoter to increase gibberellin (GA) biosynthesis in wood. X-ray diffraction (XRD) and sum frequency generation spectroscopic (SFG) analyses showed that cellulose in transgenic trees was less crystalline, but the crystal size was larger. The nanocellulose fibrils prepared from transgenic wood had an increased size compared to those from wild type. When such fibrils were used as a reinforcing agent in sheet paper preparation, the mechanical strength of the paper was significantly enhanced. Engineering the GA pathway can therefore affect nanocellulose properties, providing a new strategy for expanding nanocellulose applications.

Effect of different pre-treatments on the redispersion capacity of spray-dried microfibrillated cellulose: Elaboration and characterization of biofilms

This study aimed to evaluate the influence of the addition of the cationic surfactant cetyltrimethylammonium bromide (CTAB) in microfibrillated cellulose (MFC/CNFs) suspensions submitted to different pretreatments to produce redispersible spray-dried (SD) MFC/CNFs. Suspensions pretreated with 5 % and 10 % sodium silicate and oxidized with 2,2,6,6,-tetramethylpiperidinyl-1-oxyl (TEMPO) were modified with CTAB surfactant and subsequently dried by SD. The SD-MFC/CNFs aggregates were redispersed by ultrasound to produce cellulosic films by the casting method. In summary, the results demonstrated that the addition of CTAB surfactant to the TEMPO-oxidized suspension was critical to achieving the most effective redispersion. The experimental results obtained using micrographs, optical (UV-Vis), mechanical, water vapor barrier properties, and the quality index confirmed that the addition of CTAB to the TEMPO-oxidized suspension favored the redispersion of spray-dried aggregates, development of cellulosic films with attractive properties, offering possibilities for the elaboration of new products, for example, in the production of bionanocomposites with higher mechanical performance. This research brings interesting insights into the redispersion and application of SD-MFC/CNFs aggregates, strengthening the commercialization of MFC/CNFs for industrial use.

Regulation of hydrogen bonding network between cellulose nanofibers by rare earth ion Y3

Cellulose is regarded as the most abundant biomass, and nanocellulose derived from it has numerous applications in environmentally friendly materials. However, owing to the abundant hydroxyl groups on surface, nanocellulose is prone to agglomeration when transported, stored, or made into materials, which destroys material performance and limits its use. In this study, a feasible method was presented for regulating the hydrogen bonding strength between cellulose nanofibers (CNFs) by adding a minute quantity of rare earth ions Y³⁺ during cellulose nanofibrillation. It was found that the strength of hydrogen bonding between CNFs can be regulated by controlling the quantity of Y³⁺ in the system. The dispersibility and stability of CNFs, as well as the mechanical properties of CNFs films and CNFs-reinforced papers can be improved by 43.07 % and by 64.05 % after adding only 0.05 or 0.075 wt% Y³⁺. The possible mechanism of CNFs hydrogen bonding network reconstruction was proposed.

Microfibrillated Cellulose with a Lower Degree of Polymerization; Synthesis via Sulfuric Acid Hydrolysis under Ultrasonic Treatment

A new approach is being considered for obtaining microfibrillated cellulose with a low degree of polymerization by sulfuric acid hydrolysis with simultaneous ultrasonic treatment under mild conditions (temperature 25 °C, 80% power control). Samples of initial cellulose, MCC, and MFC were characterized by FTIR, XRF, SEM, DLS, and TGA. It was found that a high yield of MFC (86.4 wt.%) and a low SP (94) are observed during hydrolysis with ultrasonic treatment for 90 min. It was shown that the resulting microfibrillated cellulose retains the structure of cellulose I and has an IC of 0.74. It was found that MFC particles are a network of fibrils with an average size of 91.2 nm. ζ-potential of an aqueous suspension of MFC equal to -23.3 mV indicates its high stability. It is noted that MFC has high thermal stability, the maximum decomposition temperature is 333.9 °C. Simultaneous hydrolysis process with ultrasonic treatment to isolate MFC from cellulose obtained by oxidative delignification of spruce wood allows to reduce the number of stages, reduce energy costs, and expand the scope.

Corn: Its Structure, Polymer, Fiber, Composite, Properties, and Applications

Biocomposite materials have a significant function in saving the environment by replacing artificial plastic materials with natural substances. They have been enrolled in many applications, such as housing, automotive engine components, aerospace and military products, electronic and circuit board components, and oil and gas equipment. Therefore, continuous studies have been employed to improve their mechanical, thermal, physical properties. In this research, we conduct a comprehensive review about corn fiber and corn starch-based biocomposite. The results gained from previous studies were compared and discussed. Firstly, the chemical, thermal, and mechanical properties of cornstarch-based composite were discussed. Then, the effects of various types of plasticizers on the flexibility of the cornstarch-based composite were addressed. The effects of chemical treatments on the properties of biocomposite using different cross-linking agents were discussed. The corn fiber surface treatment to enhance interfacial adhesion between natural fiber and polymeric matrix also were addressed. Finally, morphological characterization, crystallinity degree, and measurement of vapor permeability, degradation, and uptake of water were discussed. The mechanical, thermal, and water resistance properties of corn starch and fibers-based biopolymers show a significant improvement through plasticizing, chemical treatment, grafting, and cross-linker agent procedures, which expands their potential applications.

Emerging Food Packaging Applications of Cellulose Nanocomposites: A Review

Cellulose is the most abundant biopolymer on Earth, which is synthesized by plants, bacteria, and animals, with source-dependent properties. Cellulose containing β-1,4-linked D-glucoses further assembles into hierarchical structures in microfibrils, which can be processed to nanocellulose with length or width in the nanoscale after a variety of pretreatments including enzymatic hydrolysis, TEMPO-oxidation, and carboxymethylation. Nanocellulose can be mainly categorized into cellulose nanocrystal (CNC) produced by acid hydrolysis, cellulose nanofibrils (CNF) prepared by refining, homogenization, microfluidization, sonification, ball milling, and the aqueous counter collision (ACC) method, and bacterial cellulose (BC) biosynthesized by the Acetobacter species. Due to nontoxicity, good biodegradability and biocompatibility, high aspect ratio, low thermal expansion coefficient, excellent mechanical strength, and unique optical properties, nanocellulose is utilized to develop various cellulose nanocomposites through solution casting, Layer-by-Layer (LBL) assembly, extrusion, coating, gel-forming, spray drying, electrostatic spinning, adsorption, nanoemulsion, and other techniques, and has been widely used as food packaging material with excellent barrier and mechanical properties, antibacterial activity, and stimuli-responsive performance to improve the food quality and shelf life. Under the driving force of the increasing green food packaging market, nanocellulose production has gradually developed from lab-scale to pilot- or even industrial-scale, mainly in Europe, Africa, and Asia, though developing cost-effective preparation techniques and precisely tuning the physicochemical properties are key to the commercialization. We expect this review to summarise the recent literature in the nanocellulose-based food packaging field and provide the readers with the state-of-the-art of this research area.

Material Properties of Traditional Handmade Paper Samples Fabricated from Cellulosic Fiber of Lokta Bushes

Handmade papers (HPs) are fabricated from fibrous biomass of Lokta bushes and other plant species following traditional eco-friendly method in Nepal. Although HP fabricated from Lokta bushes is believed to be durable and resistant to bugs and molds, material properties of this paper are not reported in literature. In this study, we measured several material properties of 10 handmade Lokta paper samples collected from local enterprises and paper industries. The mean caliper, grammage, apparent density, equilibrium moisture content, Cobb 60, brightness, opacity, tensile strength, and tensile index values in the paper samples ranged from ∼90 to 700 μm, 50 to 150 g/m², 0.2 to 0.4 g/cm³, 4 to 7%, 50 to 400 g/m², 56 to 67%, 83 to 98%, 30 to 2900 N/m, and 1 to 27 Nm/g, respectively. These properties suggested that the HPs are lightweight papers with intermediate to high strength. The tensile strength was found to be significantly higher along the length direction (p < 0.05). Characteristic features of cellulose, hemicellulose, and lignin were observed in FTIR spectra. The crystalline and amorphous phases were also identified in X-ray diffraction (XRD) data. Electron microscopy images revealed a nicely cross-linked network of intact fibers having almost parallel arrangement of microfibrils. These features could provide strength and durability to the paper samples. Understanding the material properties of HPs down to the sub-microscopic level may help improve the paper quality and find novel applications in the future.

Preparation and Characterization of Cellulose Nanofibers from Banana Pseudostem by Acid Hydrolysis: Physico-Chemical and Thermal Properties

Cellulose is a biopolymer that may be derived from a variety of agricultural wastes such as rice husks, wheat straw, banana, and so on. Cellulose fibril that is reduced in size, often known as nanocellulose (NC), is a bio-based polymer with nanometer-scale widths with a variety of unique properties. The use of NC as a reinforcing material for nanocomposites has become a popular research issue. This research paper focuses on the production of banana pseudostem cellulose nanofiber. Nano-sized fiber was obtained from banana pseudostem through several processes, namely, grinding, sieving, pre-treatment, bleaching, and acid hydrolysis. The product yield was found to be 40.5% and 21.8% for Musa acuminata and Musa balbisiana, respectively, by the weight of the raw fiber. The reduction in weight was due to the removal of hemicellulose and lignin during processing. Transmission electron microscopy (TEM) analysis showed that the average fiber size decreased from 180 µm to 80.3 ± 21.3 nm. Finally, FTIR analysis showed that the fibers experienced chemical changes after the treatment processes.

Role of nanocellulose in colored paper preparation

Colored paper is an important industrial paper grade that has applications in various industrial sectors. The increase in coloring efficiency is a key in decreasing the use of dyes, thus can be considered as a "green" process concept; the coloring efficiency depends on the dye retention and dispersion. This work explores the use of nanocellulose, specifically, TEMPO-oxidized cellulose nanofibers (TOCNF), on the coloring efficiency of the preparation of colored paper. Two dyes (i.e. direct blue GL and reactive red 195 (RR195)) were used. Thanks to the large specific surface area and abundant active sites of TOCNF, its use largely improves the direct blue GL retention during the process. The coloring difference (∆E*_ab) reached 5.334 with the addition of 13.6 wt% TOCNF and 1.8 wt% direct blue GL in the pulp furnish. The functional group in the dye is a vital factor in determining the dye retention when one chooses TOCNF to enhance the coloring efficiency in the production of colored paper. Furthermore, TOCNF significantly improved the strength properties of both direct blue GL and RR 195 dyed papers. This work demonstrates the potential of nanocellulose in the production of colored paper in improving the coloring efficiency, thus decreasing the environmental impact of the manufacturing process.

Enhancement of the Properties of Hybridizing Epoxy and Nanoclay for Mechanical, Industrial, and Biomedical Applications

The strong demand for plastic and polymeric materials continues to grow year after year, making these industries critical to address sustainability. By functioning as a filler in either a synthetic or natural starch matrix, nanoclay enables significant reductions in the impact of nonbiodegradable materials. The effect of treated nanoclay (NC) loading on the mechanical and morphological properties (EP) of epoxy is investigated in this research. The NC-EP nanocomposites were prepared via casting. The investigation begins with adding NC at concentrations of 1, 2, and 3 weight percent, followed by the effect of acid treatment on the same nanocomposites. The evaluation is focused on four mechanical tensile strength parameters: Young’s modulus, maximum load, and % elongation. The addition of NC improved the mechanical properties of the four components by 27.2%, 33.38%, 46.98%, and 43.58%, respectively. The acid treatment improved 35.9%, 42.8%, 51.1%, and 83.5%, respectively. These improvements were attributed to NC’s ability to alter the structural morphology as assessed by field emission scanning electron microscopy (FESEM), a tool for analysing the microstructure. FESEM images were used to visualise the interaction between the NC and EP nanocomposites. The dynamic mechanical properties of the hybrid nanocomposites were investigated using storage modulus, loss modulus, and tan(delta). The results have shown that the viscoelastic properties improved as the fraction of NC increased. The overall findings suggest that these nanocomposites could be used in various industrial and biomedical applications.

Hemp as a potential raw material toward a sustainable world: A review

Global warming as a result of climate change has become a major concern for people all over the world. It has recently drawn the attention of the entire conscious community, with the fear that if not addressed properly, it will result in the extinction of numerous species around the world. At the same time, it will pose a threat to human health, food security, living environment and standard of living. Thereby, possible solutions are being explored accordingly; regulations have been imposed in places binding green production practices, limiting the emission of CO₂ and emphasis is given on renewable resources along with the search for alternatives to carbon-positive materials. Cannabis sativa L. (hemp) has received a lot of attention because of its multipurpose usability, short production cycle, low capital demand in cultivation, possibility of carbon-negative transformation and easy carbon sequestering material. This paper reviews hemp as a very promising renewable resource including its potential uses in paper, textiles, composites, biofuel, and food industry.

Effects of cellulose nanofibrils and starch compared with polyacrylamide on fundamental properties of pulp and paper

Bio-based additives received significant attention in pulp and paper properties improvement. For this, the most cited biochemical Cellulose Nano Fibrils (CNFs) and Cationic Starch (CS) were experimentally compared with the most declared synthetic chemical, Cationic Polyacrylamide (CPAM). SEM images showed better paper surface filling by the utilization of the chemicals. The three studied polymers, in solely or combination mechanism, improved mainly bagasse pulp and paper properties compared to the blank sample, except for pulp drainage, which decreased by CNFs to lower volumes presumably due to its intrinsic characteristics. Cationic polymers (CP) compared to CP/CNFs approaches increased pulp retention and drainage but decreased paper density and strengths. The best pulp retention and drainage achieved by CS followed by CPAM, while paper air persistency, density, and strength properties evaluated highest by CP/CNFs followed by CNFs. Generally, CS revealed a more significant improvement in pulp and paper properties than CPAM either with or without CNFs.

Two-step immobilization of metronidazole prodrug on TEMPO cellulose nanofibrils through thiol-yne click chemistry for in situ controlled release

Nowadays, drug encapsulation and drug release from cellulose nanofibrils systems are intense research topics, and commercial grades of cellulose nanomaterials are currently available. In this work we present an ester-containing prodrug of metronidazole that is covalently bound to cellulose nanofibrils in aqueous suspension through a two-step immobilization procedure involving green chemistry principles. The presence of the drug is confirmed by several characterization tools and methods such as Raman spectroscopy, elemental analysis, Dynamic Nuclear Polarization enhanced NMR. This technique allows enhancing the sensitivity of NMR by several orders of magnitude. It has been used to study cellulose nanofibrils substrates and it appears as the ultimate tool to confirm the covalent nature of the binding through thiol-yne click chemistry. Moreover, the ester function of the immobilized prodrug can be cleaved by specific enzyme activity thus allowing controlled drug release.

Cellulose nanofibrils manufactured by various methods with application as paper strength additives

Recycled paper and some hardwood paper often display poorer mechanical properties, which hinder its practical applications and need to be addressed. In this work, cellulose nanofibrils (CNFs) obtained by a combined process of enzymatic hydrolysis and grinding (EG-CNFs), grinding and microfluidization (GH-CNFs) or TEMPO-mediated oxidation and grinding (TE-CNFs) were characterized by scanning electron microscopy (SEM) and atomic force microscopy (AFM). Moreover, CNFs were made into films on which some characterizations including X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and UV–Vis transmittance spectroscopy were implemented. Results showed that CNF fibrillation was promoted as times of passes increased in microfluidization, and CNFs pretreated by enzyme possessed shorter length. Crystallinity of CNFs was related to CNF manufacturing methods, while CNF films’ transparency was correlated to CNF diameter distributions. Moreover, CNFs were applied with different dosages on recycled and hardwood paper. Lengths of CNFs, strength of CNF network, and pulp properties were critical factors affecting the mechanical strength of CNFs-enhanced paper. GH-CNFs showed better strengthened effect on tensile strength of paper than TE-CNFs and EG-CNFs. The best overall improvement was achieved at GH-CNF10 dosage of 5.0 wt% on hardwood paper. The increment of tensile index, burst index, and folding endurance were 108.32%, 104.65%, and 600%, respectively. This work aims to find out the relationship between production methods and morphologies of CNFs and how the morphological characteristics of CNFs affecting the mechanical performance of paper when they are added as strength additives.

Cellulose-based micro-fibrous materials imaged with a home-built smartphone microscope

Micro-fibrous materials are one of the highly explored materials and form a major component of composite materials. In resource-limited settings, an affordable and easy to implement method that can characterize such material would be important. In this study, we report on a smartphone microscopic system capable of imaging a sample in transmission mode. As a proof of concept, we implemented the method to image handmade paper samples-cellulosic micro-fibrous material of different thickness. With 1 mm diameter ball lens, individual cellulose fibers, fiber web, and micro-porous regions were resolved in the samples. Imaging performance of the microscopic system was also compared with a commercial bright field microscope. For thin samples, we found the image quality comparable to commercial system. Also, the diameter of cellulose fiber measured from both methods was found to be similar. We also used the system to image surfaces of a three ply surgical facemask. Finally, we explored the application of the system in the study of chemical induced fiber damage. This study suggested that the smartphone microscope system can be an affordable alternative in imaging thin micro-fibrous material in resource limited setting.

Jatropha Oil as a Substituent for Palm Oil in Biobased Polyurethane

Polyurethanes (PUs) are unique polymers that can be tailored to suit certain applications and are increasingly used in many industrial fields. Petrochemicals are still used as the main compound to synthesize PUs. Today, environmental concerns arise in the research and technology innovations in developing PUs, especially from vegetable polyols which are having an upsurge. These are driven by the uncertainty and fluctuations of petroleum crude oil price and availability. Jatropha has become a promising substituent to palm oil so as to reduce the competition of food and nonfood in utilizing this natural resource. Apart from that, jatropha will solve the problem related to the European banning of palm oil. Herein, we review the literature on the synthesis of PUs using different vegetable oils and compare it with jatropha oil and its nanocomposites reinforced with cellulose nanocrystals. Given the potential of vegetable oil PUs in many industrial applications, we expect that they will increase commercial interest and scientific research to bring these materials to the market soon.

Micro- and Nanocellulose in Polymer Composite Materials: A Review

The high demand for plastic and polymeric materials which keeps rising every year makes them important industries, for which sustainability is a crucial aspect to be taken into account. Therefore, it becomes a requirement to makes it a clean and eco-friendly industry. Cellulose creates an excellent opportunity to minimize the effect of non-degradable materials by using it as a filler for either a synthesis matrix or a natural starch matrix. It is the primary substance in the walls of plant cells, helping plants to remain stiff and upright, and can be found in plant sources, agriculture waste, animals, and bacterial pellicle. In this review, we discussed the recent research development and studies in the field of biocomposites that focused on the techniques of extracting micro- and nanocellulose, treatment and modification of cellulose, classification, and applications of cellulose. In addition, this review paper looked inward on how the reinforcement of micro- and nanocellulose can yield a material with improved performance. This article featured the performances, limitations, and possible areas of improvement to fit into the broader range of engineering applications.

Antibacterial Cellulose Nanopapers via Aminosilane Grafting in Supercritical Carbon Dioxide

In this work, we present an innovative strategy for the grafting of an antibacterial agent onto nanocellulose materials in supercritical carbon dioxide (scCO₂). Dense cellulose nanofibril (CNF) nanopapers were prepared and subsequently functionalized in supercritical carbon dioxide with an aminosilane, N-(6-aminohexyl)aminopropyltrimethoxysilane (AHA-P-TMS). Surface characterization (X-ray photoelectron spectroscopy, contact angle, ζ-potential analysis) evidenced the presence of the aminosilane. The results show that the silane conformation depends on the curing process: a nonpolycondensed conformation of grafted silane with the amino groups facing outwards was favored by curing in an oven, while the curing step performed in scCO₂ yielded CNF structures with the alkyl chain facing outwards. The grafted nanopapers exhibited antibacterial activity, and no antibacterial agent was released into the media. Furthermore, these materials proved to benefit from low cytotoxicity. This study offers a proof of concept for the covalent grafting of active species on nanocellulose structures and the control of aminosilane orientation using a green and controlled approach. These newly designed materials could be used for their antibacterial activity in the biomedical field. Thus, perspectives for topical administration and design of wound dressing could be envisaged.

Nanocellulose in food packaging: A review

The research in eco-friendly and sustainable materials for packaging applications with enhanced barrier, thermo-mechanical, rheological and anti-bacterial properties has accelerated in the last decade. Last decade has witnessed immense interest in employing nanocellulose (NC) as a sustainable and biodegradable alternative to the current synthetic packaging barrier films. This review article gathers the research information on NC as a choice for food packaging material. It reviews on the employment of NC and its various forms including its chemico-physical treatments into bio/polymers and its impact on the performance of nanocomposites for food packaging application. The review reveals the fact that the research trends towards NC based materials are quite promising for Active Packaging (AP) applications, including the Controlled Release Packaging (CRP) and Responsive Packaging (RP). Finally, it summarizes with the challenges of sustainable packaging, gray areas that need an improvement/focus in order to commercially exploit this wonderful material for packaging application.

Preparation and anti-leakage properties of hydroxyethyl cellulose-g-poly (butyl acrylate-co-vinyl acetate) emulsion

A hydroxyethyl cellulose-g-poly (butyl acrylate-co-vinyl acetate)(HEC-g-P (BA-co-VAc)) emulsion was synthesized by free radical emulsion polymerization method from hydroxyethyl cellulose (HEC), butyl acrylate (BA) and vinyl acetate (VAc) in the presence of emulsifier sodium dodecyl benzene sulfonate (SDBS). The structure, thermal stability and morphology of the emulsion were characterized by Fourier-transform infrared (FTIR), thermogravimetric analysis (TGA), transmission electron microscope (TEM) and other analytical techniques. The results proved that BA and VAc monomers had grafted with HEC. Its thermal stability was also significantly improved compared to HEC. Moreover, the prepared emulsion was evaluated to study the performance of preventing water leakage in soil. Compared with the published anti-leakage materials prepared by directly doping hydroxyethyl cellulose, the emulsion interacted with attapulgite to form a dense consolidation layer, which had better anti-leakage performance and water retention. Therefore, the material was more favorable for popularization and application in arid and semi-arid areas.

Micro- and nanofibrillated cellulose from virgin and recycled fibers: A comparative study of its effects on the properties of hygiene tissue paper

This study aims to understand the effect of micro- and nanofibrillated cellulose (MNFC) on the tensile index, softness, and water absorbency of tissue paper. MNFC was produced from four different fiber sources. The results show that MNFC acts as an effective strength enhancer at the expense of a reduced water absorbency and softness. The impact of the fiber source on MNFC manufacturing cost and the trade-off with performance was also investigated. MNFCs produced from southern bleached hardwood kraft, northern bleached softwood kraft, and deinked pulp exhibited similar performance trends with the MNFC from the deinked pulp having a significantly lower cost. This suggests that MNFCs with similar degrees of fibrillation may be used interchangeably regardless of the fiber source, revealing the possibility to minimize MNFC manufacturing costs based on fiber selection. MNFC produced from bleached Eucalyptus kraft showed the lowest degree of fibrillation and the lowest strength improvements among the MNFCs evaluated.

How cellulose nanofibrils and cellulose microparticles impact paper strength-A visualization approach

Cellulosic nanomaterials are in the focus of academia and industry to realize light-weight biobased materials with remarkable strength. While the effect is well known, the distribution of these nanomaterials are less explored, particularly for paper sheets. Here, we explore the 3D distribution of micro and nanosized cellulosic particles in paper sheets and correlate their extent of fibrillation to the distribution inside the sheets and subsequently to paper properties. To overcome challenges with contrast between the particles and the matrix, we attached probes on the cellulose nano/microparticles, either by covalent attachment of fluorescent dyes or by physical deposition of cobalt ferrite nanoparticles. The increased contrast enabled visualization of the micro and nanosized particles inside the paper matrix using multiphoton microscopy, X-ray microtomography and SEM-EDX. The results indicate that fibrillary fines enrich at pores and fiber-fiber junctions, thereby increasing the relative bonded area between fibers to enhance paper strength while CNF seems to additionally form an inner 3D network.

Preparation of Cellulose Nanofibers from Bagasse by Phosphoric Acid and Hydrogen Peroxide Enables Fibrillation via a Swelling, Hydrolysis, and Oxidation Cooperative Mechanism

Due to the natural cellulose encapsulated in both lignin and hemicellulose matrices, as well as in plant cell walls with a compact and complex hierarchy, extracting cellulose nanofibers (CNFs) from lignocellulosic biomass is challenging. In this study, a sustainable high yield strategy with respect to other CNF preparations was developed. The cellulose was liberated from plant cell walls and fibrillated to a 7-22 nm thickness in one bath treatment with H₃PO₄ and H₂O₂ under mild conditions. The cellulose underwent swelling, the lignin underwent oxidative degradation, and the hemicellulose and a small amount of cellulose underwent acid hydrolysis. The CNFs' width was about 12 nm, with high yields (93% and 50% based on cellulose and biomass, respectively), and a 64% crystallinity and good thermal stability were obtained from bagasse. The current work suggests a strategy with simplicity, mild conditions, and cost-effectiveness, which means that this method can contribute to sustainable development for the preparation of CNFs.

Large amplitude oscillatory rheology of silica and cellulose nanocrystals filled natural rubber compounds

Nanoparticles reinforce rubbers and enhance Payne effect for the compounds experiencing large amplitude oscillatory shear deformation. Herein the effects of silica and cellulose nanocrystals on the Payne effect of natural rubber compounds are investigated by stress decomposition methods for clarifying the elastic and viscous nonlinearities varying with filler content and composition. The Payne effect is in general characterized by intercycle strain softening and shear thinning behaviors and intracycle hardening and thinning behaviors at high strain (strain rate) amplitudes while the filler influences the behaviors markedly at intermediate strain (rate) amplitudes. Especially, the addition of cellulose nanocrystals in the silica filled compounds improves the elastic nonlinearity and greatly weakens the viscous nonlinearity, providing a perspective on understanding the Payne effect for manufacturing high-performance rubber materials.

Horticultural Plant Residues as New Source for Lignocellulose Nanofibers Isolation: Application on the Recycling Paperboard Process

Horticultural plant residues (tomato, pepper, and eggplant) were identified as new sources for lignocellulose nanofibers (LCNF). Cellulosic pulp was obtained from the different plant residues using an environmentally friendly process, energy-sustainable, simple, and with low-chemical reagent consumption. The chemical composition of the obtained pulps was analyzed in order to study its influence in the nanofibrillation process. Cellulosic fibers were subjected to two different pretreatments, mechanical and TEMPO(2,2,6,6-Tetramethyl-piperidin-1-oxyl)-mediated oxidation, followed by high-pressure homogenization to produce different lignocellulose nanofibers. Then, LCNF were deeply characterized in terms of nanofibrillation yield, cationic demand, carboxyl content, morphology, crystallinity, and thermal stability. The suitability of each raw material to produce lignocellulose nanofibers was analyzed from the point of view of each pretreatment. TEMPO-mediated oxidation was identified as a more effective pretreatment to produce LCNF, however, it produces a decrease in the thermal stability of the LCNF. The different LCNF were added as reinforcing agent on recycled paperboard and compared with the improving produced by the industrial mechanical beating. The analysis of the papersheets’ mechanical properties shows that the addition of LCNF as a reinforcing agent in the paperboard recycling process is a viable alternative to mechanical beating, achieving greater reinforcing effect and increasing the products’ life cycles.

Cellulose nanofibrils prepared by twin-screw extrusion: Effect of the fiber pretreatment on the fibrillation efficiency

Twin-screw extrusion (TSE) is a rather recent method to produce cellulose nanofibrils (CNFs) at a high solid content under continuous feeding. Here, never-dried commercial eucalyptus pulp was used as starting material to produce CNFs by TSE after a chemical pretreatment to introduce carboxylic groups via TEMPO-mediated oxidation and carboxymethylation. Five samples with a carboxyl content ranging from 800 to 1300 μmol.g^-1 were produced to explore how the carboxyl content affects the aptitude of cellulose fibers to be broken down to nanoscale. The properties of the resulting CNFs in terms of nanosized fraction, morphology and rheological properties were investigated. A critical carboxyl content of 700 μmol.g^-1was a prerequisite for the successful conversion of cellulose fibers into a CNF gel by TSE, regardless the pretreatment method. The degree of swelling of the fibers was put forward to account for this critical parameter.

Agro-waste extracted cellulose supported silver phosphate nanostructures as a green photocatalyst for improved photodegradation of RhB dye and industrial fertilizer effluents

The efficiency and reusability of photocatalysts are the dominant factors for their pragmatic use. The visible light induced semiconductor silver phosphate is a superior photocatalyst effective under visible light but its stability is still an undiscussed issue. To overcome this stability issue in this present manuscript, eco-friendly agro-waste extracted cellulose supported silver phosphate nanostructures have been designed for the first time through a simple chemical process. At first, silver phosphate nanostructures were synthesized by the co-precipitation method. Then, different weights of cellulose were added to the silver nitrate solution to form cellulose supported silver phosphate nanostructures. The photodegradation efficiency for each weight ratio was examined in which the photocatalyst Ag-8 nanostructures showed a high rate (0.024 min^-1) for degradation of Rhodamine B (RhB) using a low intensity tungsten bulb. Real sample analysis has also been carried out using this photocatalyst for the degradation of industrial fertilizer effluents. The degradation rate of all the nanostructures was found to be high in comparison to pristine silver phosphate as well as the extracted bare cellulose. The photocatalytic activity is enhanced because of the participation of cellulose as a support which makes an interface for silver phosphate and assists it in delaying the charge recombination period under visible light. To understand the photochemical reaction of electrons and holes, scavenger studies were also performed.

Production of Cellulose Nanofibers from Olive Tree Harvest—A Residue with Wide Applications

With the aim of identifying new sources to produce cellulose nanofibers, olive tree pruning biomass (OTPB) was proposed for valorization as a sustainable source of cellulose. OTPB was subjected to a soda pulping process for cellulose purification and to facilitate the delamination of the fiber in the nanofibrillation process. Unbleached and bleached pulp were used to study the effect of lignin in the production of cellulose nanofibers through different pretreatments (mechanical and TEMPO-mediated oxidation). High-pressure homogenization was used as the nanofibrillation treatment. It was observed that for mechanical pretreatment, the presence of lignin in the fiber produces a greater fibrillation, resulting in a smaller width than that achieved with bleached fiber. In the case of TEMPO-mediated oxidation, the cellulose nanofiber characteristics show that the presence of lignin has an adverse effect on fiber oxidation, resulting in lower nanofibrillation. It was observed that the crystallinity of the nanofibers is lower than that of the original fiber, especially for unbleached nanofibers. The residual lignin content resulted in a greater thermal stability of the cellulose nanofibers, especially for those obtained by TEMPO-mediated oxidation. The characteristics of the cellulose nanofibers obtained in this work identify a gateway to many possibilities for reinforcement agents in paper suspension and polymeric matrices.

Research on the Strengthening Advantages on Using Cellulose Nanofibers as Polyvinyl Alcohol Reinforcement

The present work aims to combine the unique properties of cellulose nanofibers (CNF) with polyvinyl alcohol (PVA) to obtain high-performance nanocomposites. CNF were obtained by means of TEMPO-mediated ((2,2,6,6-Tetramethylpiperidin-1-yl)oxyl) oxidation, incorporated into the PVA matrix by means of compounding in a single-screw co-rotating internal mixer and then processed by means of injection molding. It was found that CNF were able to improve the tensile strength of PVA in 85% when 4.50 wt % of CNF were added. In addition, the incorporation of a 2.25 wt % of CNF enhanced the tensile strength to the same level that when 40 wt % of microsized fibers (stone groundwood pulp, SGW) were incorporated, which indicated that CNF possessed significantly higher intrinsic mechanical properties than microsized fibers. SGW was selected as reference for microsized fibers due to their extended use in wood plastic composites. Finally, a micromechanical analysis was performed, obtaining coupling factors near to 0.2, indicating good interphase between CNF and PVA. Overall, it was found that the use of CNF is clearly advantageous to the use of common cellulosic fibers if superior mechanical properties are desired, but there are still some limitations that are related to processing that restrict the reinforcement content at low contents.