Crosslinking of poly(vinylpyrrolidone)/acrylic acid with tragacanth gum for hydrogels formation for use in drug delivery applications

Chitosan based hybrid superabsorbent for controlled drug delivery application

In the present study, a hybrid chitosan-alginate superabsorbent is prepared using maleic acid as a cross-linker and acrylamide as a grafting agent using the free radical mechanism. The composite hydrogel shows good swelling capacity along with hemocompatibility and biocompatibility and hence it is utilized as a drug delivery device. The characterization techniques including x-ray diffraction, Fourier transform infrared, x-ray photoelectron spectroscopy, and thermal analysis indicate the successful synthesis of stable hydrogel with rich functionalities. Metformin hydrochloride is used as a model drug which is used to treat diabetes. The drug encapsulation is done using the swelling diffusion method after the synthesis of hydrogel. The release of metformin from the drug-loaded hydrogel at physiological pH highlights the role of non-covalent interactions between the drug and hydrogel. In vitro release studies of Metformin from the drug-loaded hydrogel show higher release profiles at intestinal pH (7.4) compared to stomach pH (1.2). The observed cumulative release is 82.71% at pH 7.4 and 45.67% at pH 1.2 after 10 h. Brunauer-Emmett-Teller analysis reveals the effect of surface area, pore size, and pore volume of hydrogel on the drug release. The drug release from the hybrid chitosan-alginate hydrogel is found to be more sustained in comparison to the pure chitosan hydrogel. For the present drug delivery system, the swelling-controlled release is found to be more dominating than the pH-controlled release. The synthesized hydrogel can be successfully employed as a potential drug delivery system for controlled drug delivery.

A review on tragacanth gum: A promising natural polysaccharide in drug delivery and cell therapy

Tragacanth is an abundant natural gum extracted from wounds created in some plants and is dried for use in various applications from industry to biomedicines. It is a cost-effective and easily accessible polysaccharide with desirable biocompatibility and biodegradability, drawing much attention for use in new biomedical applications such as wound healing and tissue engineering. Moreover, this anionic polysaccharide with a highly branched structure has been used as an emulsifier and thickening agent in pharmaceutical applications. In the following, this gum has been interested as an appealing biomaterial for producing engineering tools in drug delivery. Furthermore, the biological properties of tragacanth gum have made it a favorable biomaterial in cell therapies, especially for bone tissue engineering. This review aims to discuss the recent studies on this natural gum as a potential carrier for different drugs and cells.

In Vitro and In Vivo Evaluation of Hydroxypropyl-β-cyclodextrin-grafted-poly(acrylic acid)/poly(vinyl pyrrolidone) Semi-Interpenetrating Matrices of Dexamethasone Sodium Phosphate

In this paper, we fabricated semi-interpenetrating polymeric network (semi-IPN) of hydroxypropyl-β-cyclodextrin-grafted-poly(acrylic acid)/poly(vinyl pyrrolidone) (HP-β-CD-g-poly(AA)/PVP) by the free radical polymerization technique, intended for colon specific release of dexamethasone sodium phosphate (DSP). Different proportions of polyvinyl pyrrolidone (PVP), acrylic acid (AA), and hydroxypropyl-beta-cyclodextrin (HP-β-CD) were reacted along with ammonium persulphate (APS) as initiator and methylene-bis-acrylamide (MBA) as crosslinker to develop a hydrogel system with optimum swelling at distal intestinal pH. Initially, all formulations were screened for swelling behavior and AP-8 was chosen as optimum formulation. This formulation was capable of releasing a small amount of drug at acidic pH (1.2), while a maximum amount of drug was released at colonic pH (7.4) by the non-Fickian diffusion mechanism. Fourier transformed infrared spectroscopy (FTIR) revealed successful grafting of components and development of semi-IPN structure without any interaction with DSP. Thermogravimetric analysis (TGA) confirmed the thermal stability of developed semi-IPN. X-ray diffraction (XRD) revealed reduction in crystallinity of DSP upon loading in the hydrogel. The scanning electron microscopic (SEM) images revealed a rough and porous hydrogel surface. The toxicological evaluation of semi-IPN hydrogels confirmed their bio-safety and hemocompatibility. Therefore, the prepared hydrogels were pH sensitive, biocompatible, showed good swelling, mechanical properties, and were efficient in releasing the drug in the colonic environment. Therefore, AP-8 can be deemed as a potential carrier for targeted delivery of DSP to treat inflammatory bowel diseases.

Synthesis of pH-Sensitive Cross-Linked Basil Seed Gum/Acrylic Acid Hydrogels by Free Radical Copolymerization Technique for Sustained Delivery of Captopril

The pH-sensitive polymeric matrix of basil seed gum (BSG), with two different monomers, such as acrylic acid (AA) and N, N-Methylene-bis-acrylamide (MBA), was selected to use in hydrogels preparation through a free radical copolymerization technique using potassium per sulfate (KPS) as a cross linker. BSG, AA and MBA were used in multiple ratios to investigate the polymer, monomer and initiator effects on swelling properties and release pattern of captopril. Characterization of formulated hydrogels was done by FTIR, DSC/TGA, XRD and SEM techniques to confirm the stability. The hydrogels were subjected to a variety of tests, including dynamic swelling investigations, drug loading, in vitro drug release, sol–gel analyses and rheological studies. FTIR analysis confirmed that after the polymeric reaction of BSG with the AA monomer, AA chains grafted onto the backbone of BSG. The SEM micrographs illustrated an irregular, rough, and porous form of surface. Gel content was increased by increasing the contents of polymeric gum (BSG) with monomers (AA and MBA). Acidic and basic pH effects highlighted the difference between the swelling properties with BSG and AA on increasing concentration. Kinetic modelling suggested that Korsmeyer Peppas model release pattern was followed by the drug with the non-Fickian diffusion mechanism.

A Green Approach for the Synthesis of Silver Nanoparticle-Embedded Chitosan Bionanocomposite as a Potential Device for the Sustained Release of the Itraconazole Drug and Its Antibacterial Characteristics

The present research work intended to demonstrate the green synthesis of silver nanoparticles (AgNPs) using the plant extract Saccharum officinarum, and then the development of chitosan–silver (CH-Ag) bionanocomposite. The synthesized AgNPs were characterized using UV spectroscopy, Fourier transform infrared (FTIR), and transmission electron microscopy (TEM). The maximum absorption spectrum peak was observed at 420 nm, revealing the formation of AgNPs by the stem extract of S. officinarum. The AgNPs sizes were in the range of 10–50 nm. Itraconazole is an antifungal that is used as a novel drug to study its release through synthesized bionanocomposite. Different kinetic models, such as zero order, first order, Korsmeyer–Peppas, Hixson–Crowell and Higuchi, were used to study the drug release profile from the synthesized CH-Ag bionanocomposite. The first-order kinetic model showed the best fit for the drug release with the maximum regression coefficient value. The antibacterial activity of the synthesized CH-Ag bionanocomposite was examined against Bacillus cereus, Staphylococcus, and Escherichia coli, and it was shown to be efficient against these strains.

Bacterial Cellulose and ECM Hydrogels: An Innovative Approach for Cardiovascular Regenerative Medicine

Cardiovascular diseases are considered the leading cause of death in the world, accounting for approximately 85% of sudden death cases. In dogs and cats, sudden cardiac death occurs commonly, despite the scarcity of available pathophysiological and prevalence data. Conventional treatments are not able to treat injured myocardium. Despite advances in cardiac therapy in recent decades, transplantation remains the gold standard treatment for most heart diseases in humans. In veterinary medicine, therapy seeks to control clinical signs, delay the evolution of the disease and provide a better quality of life, although transplantation is the ideal treatment. Both human and veterinary medicine face major challenges regarding the transplantation process, although each area presents different realities. In this context, it is necessary to search for alternative methods that overcome the recovery deficiency of injured myocardial tissue. Application of biomaterials is one of the most innovative treatments for heart regeneration, involving the use of hydrogels from decellularized extracellular matrix, and their association with nanomaterials, such as alginate, chitosan, hyaluronic acid and gelatin. A promising material is bacterial cellulose hydrogel, due to its nanostructure and morphology being similar to collagen. Cellulose provides support and immobilization of cells, which can result in better cell adhesion, growth and proliferation, making it a safe and innovative material for cardiovascular repair.

Composite Polyvinylpyrrolidone-Sodium Alginate-Hydroxyapatite Hydrogel Films for Bone Repair and Wound Dressings Applications

Today, the synthesis of biocompatible and bioresorbable composite materials such as “polymer matrix-mineral constituent,” which stimulate the natural growth of living tissues and the restoration of damaged parts of the body, is one of the challenging problems in regenerative medicine. In this study, composite films of bioresorbable polymers of polyvinylpyrrolidone (PVP) and sodium alginate (SA) with hydroxyapatite (HA) were obtained. HA was introduced by two different methods. In one of them, it was synthesized in situ in a solution of polymer mixture, and in another one, it was added ex situ. Phase composition, microstructure, swelling properties and biocompatibility of films were investigated. The crosslinked composite PVP-SA-HA films exhibit hydrogel swelling characteristics, increasing three times in mass after immersion in a saline solution. It was found that composite PVP-SA-HA hydrogel films containing HA synthesized in situ exhibited acute cytotoxicity, associated with the presence of HA synthesis reaction byproducts—ammonia and ammonium nitrate. On the other hand, the films with HA added ex situ promoted the viability of dental pulp stem cells compared to the films containing only a polymer PVP-SA blend. The developed composite hydrogel films are recommended for such applications, such as membranes in osteoplastic surgery and wound dressing.

Hydroxyapatite mineralization of chitosan-tragacanth blend/ZnO/Ag nanocomposite films with enhanced antibacterial activity

Biocompatible nanocomposites (NCs) with antibacterial activity containing organic matrix and inorganic nanoparticles (NPs) are vital for providing a suitable substrate for hydroxyapatite (HA) formation. Therefore, we fabricated a series of biocompatible NCs of chitosan (CS) and tragacanth gum (TG) and different percentages of ZnO NPs and ZnO@Ag NPs as fillers into the CS-TG blend. The characteristics of the NCs were distinguished with the field-emission scanning electron microscope (FE-SEM), X-Ray diffraction, Fourier transform infrared, and transmission electron microscopy (TEM). The CS-TG/ZnO@Ag(1:0.500) NC 8 wt% showed a rough surface according to FE-SEM. Moreover, the TEM image of CS-TG/ZnO NC 8 wt% depicted a uniform dispersion of NPs into the matrix. The biocompatibility of these NCs was evaluated by the formation of HA on their surfaces. The outcomes depicted the deposition of HA on the surface of all NCs. Also, CS-TG/ZnO@Ag(1:0.500) NC 8 wt% exhibited the most HA deposition on its surface. The antibacterial activity of these NCs toward Staphylococcus aureus and Escherichia coli bacteria was evaluated. The CS-TG/ZnO@Ag(1:0.500) NC 8 wt% exhibited a higher inhibition zone diameter in comparison to the ZnO@Ag (1:0.500) NPs for the S. aureus bacteria. Generally, antibacterial activity of the NCs containing ZnO@Ag NPs are more than NCs containing ZnO NPs.

Applications of emerging botanical hydrocolloids for edible films: A review

In recent years, many studies have been conducted on the production of edible films from emerging gums, which are mostly made from botanical sources. However, each one interacts differently with the film compounds, producing films with different properties that may improve or hinder their utilization in food packaging. Therefore, the aim of this review was to investigate and compare the physical, mechanical, thermal and structural properties of edible films produced with these emerging gums. The results of this review showed that it is possible to produce edible films with desirable physical, mechanical and thermal properties by optimizing the amounts and type of compounds in film formulations such as plasticizers, nanoparticles, lipid compounds, crosslinkers and combination of gums with other biopolymers. The future trends of this research include the deepening of knowledge to understand the molecular structures of emerging gums and to address the shortcomings of films based on these gums for their industrial-scale application in food packaging.

Shear sensitive injectable hydrogels of cross-linked tragacanthic acid for ocular drug delivery: Rheological and biological evaluation

Drug delivery to posterior segment of eye has always been challenging. The aim of the present study was to provide a novel injectable, shear sensitive hydrogel based on tragacanthic acid (TA) with three kinds of acetate salts as cross-linker. Rheological properties by strain and shear stress sweep measurements and also dynamic rheological experiments including frequency and time sweep measurements were studied. Biological studies comprising, cell culture, Draize test on rabbit eyes and histopathological tests were done. The results showed the optimized hydrogel was biocompatible, injectable and owning acceptable firmness in rest state after injection. Healing time of the hydrogel was 46 s and was shear-sensitive. It showed no cytotoxicity on HUVEC cells. No allergic reaction was seen in Draize test and histological examination showed integrity of the retinal layers with no evidence of pathological changes, such as deformations, degeneration, or inflammation. TA hydrogel is promising in ocular drug delivery.

Physicomechanical, rheological and in vitro cytocompatibility properties of the electron beam irradiated blend hydrogels of tyramine conjugated gum tragacanth and poly (vinyl alcohol)

In the present study, preparation of blend hydrogels of tyramine conjugated gum tragacanth and poly (vinyl alcohol) was carried out by electron beam irradiation, and modification of hydrogel properties with poly (vinyl alcohol) was demonstrated. Gel content, swelling behavior, pore size and mechanical and rheological properties of hydrogels prepared at 14, 28 and 56 kilogray (kGy) with different ratios of polymers were investigated. Gel content increased from 67 ± 2% for pure tyramine conjugated gum tragacanth hydrogel to >92% for blend hydrogels. However, the corresponding equilibrium swelling degree decreased from 35.21 ± 1.51 to 9.14 ± 1.66 due to the higher crosslink density of blend hydrogel. The mechanical strength of the hydrogels with interconnected pores increased significantly in the presence of poly (vinyl alcohol) and increasing irradiation dose up to 28 kGy with a twenty-fold enhancement of stress fracture and excellent elastic recovery in cyclic compression analysis. The equilibrium swelling degree of blend hydrogel containing 3% w/v tyramine conjugated gum tragacanth and 2% w/v poly (vinyl alcohol) prepared at 28 kGy was 16.59 ± 0.81. The biocompatibility of hydrogels was tested in the presence of rabbit bone marrow mesenchymal stem cells. The viability of cells exposed to hydrogel extract was >92% after 7 days of culture and indicated hydrogel biocompatibility with potential biomedical applications.

Doxycycline drug delivery using hydrogels of O-carboxymethyl chitosan conjugated with caffeic acid and its composite with polyacrylamide synthesized by electron beam irradiation

Two hydrogels of O-carboxymethyl chitosan conjugated with caffeic acid and its composite with polyacrylamide were synthesized using electron beam irradiation. The synthesized hydrogels were characterized by Fourier transform infrared spectroscopy, X-ray diffraction, thermogravimetric analysis, scanning electron microscopy, and mechanical properties studies. The hydrogels were loaded with doxycycline by swelling and its release was investigated in various media. The effect of the dose of electron beam irradiation and PAAm amount on the properties of hydrogels including swelling, drug loading, drug release, mechanical properties, and gel content were studied. The release of doxycycline form hydrogels in different media obeyed the mechanism of non-Fickian diffusion and best fitted to the Higuchi model and Korsmeyer-Peppas. In-vitro doxycycline release consideration indicated that the drug's release from composite hydrogel occurs with higher amounts than the other one. The cytotoxic study confirmed the non-toxicity of the prepared hydrogels dressing. Moreover, the growth inhibition of permissive bacteria against Staphylococcus aureus and Escherichia coli were observed for doxycycline-loaded hydrogels. So, the synthesized hydrogels are appropriate for practical application as a new antibacterial wound dressing.

Functional cellulose-based hydrogels as extracellular matrices for tissue engineering

Cellulose-based hydrogels are immensely important for tissue engineering. In this review, we attempt to document the source, nature, and application of cellulose-based hydrogels as an extracellular matrix for tissue growth and regeneration. Hydrogels can be prepared either from native cellulose, including both bacterial and plant sources or from cellulose derivatives, such as methyl cellulose, carboxymethylcellulose, and hydroxypropylmethylcellulose or even metal ions such as silver. Cellulose-polymer composite (polymers that include natural sources including chitosan, starch, alginates, collagen, hyaluronic acid, and chitin) are an attractive, inexpensive, and advantageous structural material that is easy to use. Cellulose-based scaffolding materials are widely used in the regeneration of various tissues, such as bone, cartilage, heart, blood vessel, nerve, and liver, among others. In this review, we discuss the most important applications of cellulosic hydrogels in tissue engineering based on their structural compositions.

Recent progress in the industrial and biomedical applications of tragacanth gum: A review

Natural polymers have distinct advantages over synthetic polymers because of their abundance, biocompatibility, and biodegradability. Tragacanth gum, an anionic polysaccharide, is a natural polymer which is derived from renewable sources. As a biomaterial, tragacanth gum has been used in industrial settings such as food packaging and water treatment, as well as in the biomedical field as drug carriers and for wound healing purposes. The present review provides an overview on the state-of-the-art in the field of tragacanth gum applications. The structure, properties, cytotoxicity, and degradability as well as the recent advances in industrial and biomedical applications of tragacanth gum are reviewed to offer a backdrop for future research.

Tree gum-based renewable materials: Sustainable applications in nanotechnology, biomedical and environmental fields

The prospective uses of tree gum polysaccharides and their nanostructures in various aspects of food, water, energy, biotechnology, environment and medicine industries, have garnered a great deal of attention recently. In addition to extensive applications of tree gums in food, there are substantial non-food applications of these commercial gums, which have gained widespread attention due to their availability, structural diversity and remarkable properties as 'green' bio-based renewable materials. Tree gums are obtainable as natural polysaccharides from various tree genera possessing exceptional properties, including their renewable, biocompatible, biodegradable, and non-toxic nature and their ability to undergo easy chemical modifications. This review focuses on non-food applications of several important commercially available gums (arabic, karaya, tragacanth, ghatti and kondagogu) for the greener synthesis and stabilization of metal/metal oxide NPs, production of electrospun fibers, environmental bioremediation, bio-catalysis, biosensors, coordination complexes of metal-hydrogels, and for antimicrobial and biomedical applications. Furthermore, polysaccharides acquired from botanical, seaweed, animal, and microbial origins are briefly compared with the characteristics of tree gum exudates.

Polymerizable Microsphere-Induced High Mechanical Strength of Hydrogel Composed of Acrylamide

Polymerizable microspheres are introduced into acrylamide to prepare the high mechanical strength hydrogels with a novel three-dimensional pore structure. Rheological properties, compressive stress–strain, tensile property, and compression strength of three different types of hydrogels were investigated. Moreover, a scanning electron microscope (SEM) was adopted to observe the three-dimension network structure of three different types of hydrogels. The test results illustrated that viscous moduli (G″) and elastic moduli (G′) of a hydrogel containing polymerizable microspheres (P) reached maximum values, compared to the normal hydrogel (N) and the composite hydrogel containing ordinary microspheres (O). When the hydrogels were squeezed, the N was easily fractured under high strain (99%), whereas the P was not broken, and quickly recovered its initial morphology after the release of load. The P showed excellent tensile properties, with an elongation at break up to 90% and a tensile strength greater than 220 g. The compression strength of the N was 100.44 kPa·m⁻¹, while the resulting strength of P was enhanced to be 248.00 kPa·m⁻¹. Therefore, the various performances of N were improved by adding polymerizable microspheres. In addition, the SEM images indicated that N has a general three-dimensional network structure; the conventional network structure did not exist in the P, which has a novel three-dimensional pore structure in the spherical projection and very dense channels, which led to the compaction of the space between the three-dimensional pore network layers and reduced the flowing of free water wrapped in the network. Therefore, the mechanical strength of hydrogel was enhanced.

Ultrasonic-assisted manufacturing of new hydrogel nanocomposite biosorbent containing calcium carbonate nanoparticles and tragacanth gum for removal of heavy metal

This article reports the first incorporation of calcium carbonate nanoparticles (CC NPs) into tragacanth gum (TG) to prepare a new hydrogel nanocomposite (HNC) system using a green, safe, and eco-friendly method, ultrasound irradiation as an efficient biosorbent of heavy metal ions from wastewater. Morphological studies revealed that the surface of obtained HNCs is rough, homogeneous, and porous-like due to the embedding of CC NPs as well as sonication in comparison to the neat TG which has a smooth surface. The particle size reduction was observed for CC NPs in the matrix (from 57 to 10 nm), which is owing to the extraordinary effect of sonication on this process. Thermal stability of HNCs has been increased after using CC NPs from 8.5 wt% for TG to about 22 wt% for HNCs. The optical band gap of TG/CC HNC 5 wt% calculated to be 4.46 eV which is less than that of CC NPs (5.58 eV) and even TG (6.28 eV) and this result indicated that TG/CC HNC 5 wt% is relatively more conductive than CC NPs and TG. The nitrogen adsorption-desorption disclosed an isotherm type III of Brunauer classification for TG/CC HNC 5 wt% and the surface area has been increased from 0.7 m².g^-1 for TG to 2.3 m².g^-1 for TG/CC HNC 5 wt%. Also, the BET surface area for TG/CC HNC 5 wt% calculated to be 7.8 nm which is classified into mesoporous materials. The Pb²⁺ ions were significantly removed from water using TG/CC HNC 5 wt% and the removal efficiency was determined as 83% at optimized conditions (pH = 5, adsorbent dosage = 0.015 g, time = 3 h, and Pb²⁺ concentration = 70 mg.L^-1).

Antioxidant activity and controlled drug delivery potential of tragacanth gum-cl- poly (lactic acid-co-itaconic acid) hydrogel

Tragacanth gum-cl-poly (lactic acid-co-itaconic acid) (TG-cl-p(LA-co-IA)) hydrogel is synthesized through graft copolymerization reaction using microwave assisted technique. The synthesized hydrogel was characterised using various analytical and characterization techniques such as FTIR, FESEM, XRD, TGA, TEM and SEM. It was observed that, the maximum percentage swelling (P_s) of the hydrogel was 311.61% after 6h at room temperature and 298.06% after 3h at 60°C and TG-cl-p(LA-co-IA) exhibited highest Amoxicillin loading (73%) in double distilled waterafter 24h. From the controlled release studies, it was evident that maximum drug release of about 96% took place at pH 2.2=after 6h. The synthesized hydrogel also showed mild antioxidant properties and 43.85% of free radical scavenging was occurred at a concentration of 640μg/mL and hence it can be effectively used to reduce the oxidative stresses. In addition to this, the antibacterial studies also showed that it is more effective against S. aureus.

Synthesis and characterization of bacterial cellulose and gelatin-based hydrogel composites for drug-delivery systems

•

Gelatin and bacterial cellulose based hydrogel composite was successfully prepared as drug delivery system.

•

Utilization of glutaraldehyde was employed as crosslinking agent for hydrogel formation.

•

Green hydrogel presented the excellent swelling ratio.

Bacterial cellulose and gelatin were successfully used to develop a hydrogel composite material. Hydrogel was synthesized by copolymerization between bacterial cellulose and gelatin. Scanning electron microscopy (SEM) images showed that the bacterial cellulose chain was uniform in size and shape. Glutaraldehyde was employed as a crosslinking agent. H-bonds were formed via the reaction between the amine and hydroxyl groups, which were the functional groups of the gelatin and bacterial cellulose, respectively. The hydrogel composite presented excellent properties in terms of its thermal stability, chemical resistance, and mechanical properties. Moreover, the swelling ratio of the hydrogel network, in water, was estimated to be 400–600%. Importantly, the hydrogel composite developed during this study is considered a good candidate for drug-delivery systems.

Controlled release of antibiotic amoxicillin drug using carboxymethyl cellulose-cl-poly(lactic acid-co-itaconic acid) hydrogel

In this paper, microwave assisted preparation of carboxymethyl cellulose-cl-poly(lactic acid-co-itaconic acid) (CMC-cl-P(LA-co-IA)) hydrogel was reported via facile graft copolymerization using N,N¹-methylene-bis-acrylamide (MBA) and potassium persulphate as cross linker and initiator. Different reaction parameters were optimized to achieve good yield. The formation of hydrogel was confirmed by characterization techniques such as Fourier transform infrared spectroscopy, field emission scanning electron microscopy, X-ray diffraction, thermo gravimetric analysis, transmission electron microscopy etc. The antimicrobial activities of the hydrogel were studied against Staphylococcus aureus and Escherichia coli. About 95% killing of bacteria was recorded after 24h. The controlled release of amoxicillin drug from hydrogel was evaluated as a function of pH and time. Maximum drug release of 98% was recorded at 2.2 pH after 7h. The kinetic studies showed non-Fickian diffusion of the drug.