Undec-10-enoic acid functionalized chitosan based novel nano-conjugate: An enhanced anti-bacterial/biofilm and anti-cancer potential

Enhancing antifungal and biocompatible efficacy of undecanoic acid through incorporation with chitosan-based nanoemulsion

The management of invasive fungal infections in humans poses significant challenges due to the intricate nature of the treatment, which is both arduous and costly, necessitating routine diagnostic procedures. Consequently, this investigation aimed to formulate a chitosan-based nanoemulsion (CS NEMs) incorporating the antifungal agent undecanoic acid (UDA), characterizing these NEMs and assessing their antifungal efficacy against both filamentous and non-filamentous fungal pathogens. The CS-based UDA NEMs were synthesized by introducing the surfactant Triton X-100 and the stabilizer glycerol. Nanoparticle tracking analysis (NTA) and SEM demonstrated the CS-UDA NEMs with an average size of 145 nm and 164.5 ± 24 nm, respectively. The successful formation of CS-UDA NEMs was verified through FTIR and XRD. CS-UDA NEMs exhibited exceptional inhibition against Aspergillus flavus, Aspergillus fumigatus, Aspergillus niger, and Candida albicans with MFC of 500, 500, 250 and 250 μg/mL, respectively. Additionally, CS-UDA NEMs displayed comparatively lower antioxidant activity as determined by DPPH and ABTS radical scavenging assays. Importantly, CS-UDA NEMs demonstrated no cytotoxic effects on NIH3T3 cells even at higher concentration (1000 μg/mL), as confirmed by cell viability and fluorescent staining assays. In conclusion, this study suggests that the developed CS-UDA NEMs hold promise as potent antifungal agents with diverse potential applications.

Synthesis, characterization and antifungal properties of maleopimaric anhydride modified chitosan

Fruit spoilage can cause huge economic losses, in which fungal infection is one of the main influencing factors, how to effectively control mould and spoilage of fruits and prolong their shelf-life has become a primary issue in the development of fruit and vegetable industry. In this study, rosin derivative maleopimaric anhydride (MPA) was combined with biodegradable and antifungal chitosan (CS) to enhance its antifungal and preservative properties. The modified compounds were characterized by FTIR, 1H NMR spectra and XRD, and the in vitro antifungal properties of the modified compounds were evaluated by the radial growth assay and the minimal inhibitory concentration assay. The preservation effect on small mandarin oranges and longan was studied. The analysis revealed that the modification product (CSMA) of MPA access to C6-OH of CS had a better antifungal effect. In addition, CSMA was more environmentally friendly and healthier than the commercially available chemical preservative (Imazalil), and had the same antifungal preservative effect in preserving small mandarin orange, and was able to extend the shelf life to >24 d. In the preservation of longan, CSMA was more effective against tissue water loss and was able to maintain the moisture in the longan pulp and extend the shelf life. Therefore, CSMA has good application potentials in longan keeping-fresh.

Synthesis, characterization and antifungal properties of dehydroabietic acid modified chitosan

The bioactivities of pristine chitosan are considerable weak compared with the commercial chemicals, which has restricted its broad application prospects in food packaging and preservation. In order to obtain a safe, biologically derived fruits preservative with excellent antifungal properties, dehydroabietic acid (DHA) was used to modify chitosan (CS). The structural characterization of modified chitosans were identified by FTIR and 1H NMR spectra. The XRD pattern showed the modified chitosan changed the crystal structure due to the modification of the amino and/or hydroxyl groups on the chitosan. Their antifungal activities against Penicillium digitutim and Penicillium italicum were investigated in vitro using the radial growth assay and the minimal inhibitory concentration assay. The study also examined the differences in antifungal effect among three modified chitosans. The results showed that DHA only conjugated thehydroxyl group at C-6, bearing free amino group at C-2, exhibited the strongest antifungal effect, with a minimum inhibitory concentration (MIC) of 200 μg/mL. In addition, a comparison of the antifungal activity of the modified compounds with different concentrations of Imazalil demonstrated that the modified biologic antifungal agent was as effective as Imazalil. CSDA can achieve 100 % inhibition of P. digitutim at concentrations >100 μg/mL and remain unchanged for a long time. Because CSDA can enhance the shelf life of longans, DHA-CS, chitosan derivatives, have tremendous promise for use in fruits preservation.

Biomacromolecule-Functionalized Nanoparticle-Based Conjugates for Potentiation of Anticancer Therapy

Cancer is a rapidly growing life-threatening disease that affected 18.1 million people worldwide in 2018. Various conventional techniques like surgery, radiation, and chemotherapy are considered as a mainstream treatment for patients but show some limitations like cytotoxicity due to off-targeted action, poor intra-tumor localization, development of multi-drug resistance by tumor cells, physical and psychological stresses, etc. Such limitations have motivated the scientists to work towards more patient-centric and precision therapy using advanced drug delivery systems like liposomes, nanoparticles, nanoconjugates, etc. However, these carriers also face limitations like poor biocompatibility, lesser payload capacity, leakage of encapsulated drug, and short-term stability. So, this review article explores the profound insights for the development of biomacromolecule-functionalized nanoconjugates to potentiate the anticancer activity of therapeutic agents for various cancers like lung, colorectal, ovarian, breast and liver cancer. Researchers have shown interest in biofunctionalized nanoconjugates because of advantages like biocompatibility, site-specificity with better localization, higher entrapment with long-term stability and lesser off-target toxicity. The progressive trend of biomacromolecule nanoconjugates will encourage further research for the development of effective transport of drugs, nutraceuticals and phytoconstituents for on-site effect at cancer microenvironment and tumor cells with higher safety profile.

Microwave Enabled Physically Cross Linked Sodium Alginate and Pectin Film and Their Application in Combination with Modified Chitosan-Curcumin Nanoparticles. A Novel Strategy for 2nd Degree Burns Wound Healing in Animals

This study reports microwave assisted physically cross-linked sodium alginate and pectin film and their testing in combination with modified chitosan-curcumin nanoparticles for skin tissue regeneration following 2nd degree burn wound. Film was formulated by solution casting method and physically cross-linked using microwave irradiation at frequency of 2450 MHz, power 750 Watt for different time intervals for optimization. The optimized formulation was analyzed for various physiochemical attributes. Afterwards, the optimized film and optimized modified chitosan-curcumin nanoparticles were tested in combination for skin regeneration potential following burn wound in vivo and skin samples extracted and tested for different attributes. The results indicated that the optimized film formulation (5 min microwave treatment) physicochemical attributes significantly enhanced addressing the properties required of a wound healing platform. The vibrational analysis indicated that the optimized film experienced significant rigidification of hydrophilic domains while the hydrophobic domains underwent significant fluidization which also resulted in significant increase in the transition temperatures and system enthalpies of both polymer moieties with microwave treatment. The combined film and nanoparticles application significantly increased protein content in the wounds which were evident from higher absorbance ratios of amide-I and amide-II (2.15 ± 0.001), significantly higher melting transition temperature and enthalpy (∆T = 167.2 ± 15.4 °C, ∆H = 510.7 ± 20.1 J/g) and higher tensile strength (14.65 ± 0.8 MPa) with significantly enhanced percent re-epithelization (99.9934 ± 2.56) in comparison to other treatments. The combined application of film and nanoparticles may prove to be a new novel treatment strategy for 2nd degree burn wound healing.

Innovative Strategies Toward the Disassembly of the EPS Matrix in Bacterial Biofilms

Bacterial biofilms represent a major concern at a worldwide level due to the high demand for implantable medical devices and the rising numbers of bacterial resistance. The complex structure of the extracellular polymeric substances (EPS) matrix plays a major role in this phenomenon, since it protects bacteria from antibiotics, avoiding drug penetration at bactericidal concentrations. Besides, this structure promotes bacterial cells to adopt a dormant lifestyle, becoming less susceptible to antibacterial agents. Currently, the available treatment for biofilm-related infections consists in the administration of conventional antibiotics at high doses for a long-term period. However, this treatment lacks efficiency against mature biofilms and for implant-associated biofilms it may be necessary to remove the medical device. Thus, biofilm-related infections represent an economical burden for the healthcare systems. New strategies focusing on the matrix are being highlighted as alternative therapies to eradicate biofilms. Here, we outline reported matrix disruptive agents, nanocarriers, and technologies, such as application of magnetic fields, photodynamic therapy, and ultrasounds, that have been under investigation to disrupt the EPS matrix of clinically relevant bacterial biofilms. In an ideal therapy, a synergistic effect between antibiotics and the explored innovated strategies is aimed to completely eradicate biofilms and avoid antimicrobial resistance phenomena.

Synthesis and Physicochemical Characterization of Undecylenic Acid Grafted to Hyaluronan for Encapsulation of Antioxidants and Chemical Crosslinking

In this work, a new amphiphilic derivative made of 10-undecylenic acid grafted to hyaluronan was prepared by mixed anhydrides. The reaction conditions were optimized, and the effect of the molecular weight (Mw), reaction time, and the molar ratio of reagents was explored. Using this methodology, a degree of substitution up to 50% can be obtained. The viscosity of the conjugate can be controlled by varying the substitution degree. The physicochemical characterization of the modified hyaluronan was performed by infrared spectroscopy, Nuclear Magnetic Resonance, Size-Exclusion Chromatography combined with Multiangle Laser Light Scattering (SEC-MALLS), and rheology. The low proton motility and self-aggregation of the amphiphilic conjugate produced overestimation of the degree of substitution. Thus, a novel method using proton NMR was developed. Encapsulation of model hydrophobic guest molecules, coenzyme Q10, curcumin, and α-tocopherol into the micellar core was also investigated by solvent evaporation. HA-UDA amphiphiles were also shown to self-assemble into spherical nanostructures (about 300 nm) in water as established by dynamic light scattering. Furthermore, HA-UDA was crosslinked via radical polymerization mediated by ammonium persulphate (APS/TEMED). The cross-linking was also tested by photo-polymerization catalyzed by Irgacure 2959. The presence of the hydrophobic moiety decreases the swelling degree of the prepared hydrogels compared to methacrylated-HA. Here, we report a novel hybrid hyaluronan (HA) hydrogel system of physically encapsulated active compounds and chemical crosslinking for potential applications in drug delivery.

Antibacterial, Antibiofilm, and Antiadhesive Properties of Different Quaternized Chitosan Derivatives

In the era of antimicrobial resistance, the identification of new antimicrobials is a research priority at the global level. In this regard, the attention towards functional antimicrobial polymers, with biomedical/pharmaceutical grade, and exerting anti-infective properties has recently grown. The aim of this study was to evaluate the antibacterial, antibiofilm, and antiadhesive properties of a number of quaternized chitosan derivatives that have displayed significant muco-adhesive properties and wound healing promotion features in previous studies. Low (QAL) and high (QAH) molecular weight quaternized chitosan derivatives were synthetized and further modified with thiol moieties or pendant cyclodextrin, and their antibacterial activity evaluated as minimal inhibitory concentrations (MIC) and minimal bactericidal concentrations (MBC). The ability of the derivatives to prevent biofilm formation was assessed by crystal violet staining. Both QAL and QAH derivatives exerted a bactericidal and/or inhibitory activity on the growth of P. aeruginosa and S. epidermidis. The same compounds also showed marked dose-dependent anti-biofilm activity. Furthermore, the high molecular weight derivative (QAH) was used to functionalize titanium plates. The successful functionalization, demonstrated by electron microscopy, was able to partially inhibit the adhesion of S. epidermidis at 6 h of incubation. The shown ability of the chitosan derivatives tested to both inhibit bacterial growth and/or biofilm formation of clinically relevant bacterial species reveals their potential as multifunctional molecules against bacterial infections.

Antitumor effects of seleno-short-chain chitosan (SSCC) against human gastric cancer BGC-823 cells

Seleno-short-chain chitosan (SSCC) is a derivative of chitosan. In the present study, we sought to investigate the underlying antitumor mechanism of SSCC on human gastric cancer BGC-823 cells in vitro. MTT assay suggested that SSCC exhibited a dose-dependent inhibitory effect on the proliferation of BGC-823 cells. We found the SSCC-treated cells showed typical morphological characteristics of apoptosis in a dose dependent manner by observing on microscope. Annexin V-FITC/PI double staining and cell cycle assay identified that SSCC could induce BGC-823 cells apoptosis by triggering G2/M phase arrest. Our research provided the first evidence that SSCC could effectively induce the apoptosis of BGC-823 cells via an intrinsic mitochondrial pathway, as indicated by inducing the disruption of mitochondrial membrane potential (MMP), the excessive accumulation of reactive oxidative species (ROS), the increase of Bax/Bcl-2 ratio and the activation of caspase 3, caspase 9 and cytochrome C (Cyt-C) in BGC-823 cells. These combined results clearly indicated that SSCC could induce BGC-823 cells apoptosis by the involvement of mitochondrial signaling pathway, which provided precise experimental evidence for SSCC as a potential agent in the prevention and treatment of human gastric cancer.

Zinc oxide-decorated polypyrrole/chitosan bionanocomposites with enhanced photocatalytic, antibacterial and anticancer performance

A bio-nanocomposite matrix of polypyrrole grafted ZnO/chitosan (Ppy/C/Z) was synthesized via the in situ polymerization of pyrrole with different weight fractions of ZnO. Incorporation of ZnO nanoparticles with polypyrrole enhances the photocatalytic, antibacterial as well as cytotoxic properties of the resultant composite. Characterizations of the synthesized product were performed by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and thermal analysis (TGA and DTA). Surface morphology and particle size were determined by SEM and TEM. The elemental composition of the material was studied by EDX coupled with SEM. Electrochemical surface area was calculated from electrochemical double layer capacitance (EDLC) measurements using cyclic voltammetry. The photocatalytic activity of the composite material was tested by monitoring the degradation of reactive orange-16 (RO-16), Coomassie Brilliant Blue R-250 (CBB-R-250) and Methylene Blue (MB) dyes and the composite was found to be an effective catalyst in the presence of a UV light source. Various scavengers were used to detect the reactive species involved in the photocatalytic process. Furthermore, the stability of the photocatalyst was assessed by recycling experiments. Moreover, the Ppy/C/Z bio-nanocomposite shows potential application with anti-bacterial and anti-cancer activity against Gram-positive and Gram-negative bacterial pathogens and human cancer cell lines (HeLa and MCF-7). The experimental data confirm that the bio-nanocomposite of Ppy/C/Z showed excellent anti-bacterial and anti-cancer activity as compared to a pristine polypyrrole and chitosan formulation (Ppy/C). The apoptosis data with varying concentrations of Ppy/C/Z reveal the remarkable activity against these cancer cell lines.

Bio-nanocomposites were synthesized via grafting polypyrrole/ZnO onto chitosan chain for the photodegradation of organic pollutants and biomedical applications.

In vitro antibacterial and early stage biofilm inhibitory potential of an edible chitosan and its phenolic conjugates against Pseudomonas aeruginosa and Listeria monocytogenes

In the present study, the antibacterial potential of chitosan grafted with phenolics (CPCs) such as caffeic acid (CCA), ferulic (CFA), and sinapic acid (CSA) were evaluated against foodborne pathogens like Pseudomonas aeruginosa (PA) and Listeria monocytogenes (LM). The geometric means of minimum inhibitory concentration (MIC range 0.05-0.33 mg/ml), bactericidal concentration (MBC range 0.30-0.45 mg/ml), biofilm inhibitory concentration (BIC range 0.42-0.83 mg/ml), and biofilm eradication concentration (BEC range 1.71-3.70 mg/ml) of CPCs were found to be lower than the MIC (0.12-1.08 mg/ml), MBC (0.17-1.84 mg/ml), BIC (4.0-4.50 mg/ml), and BEC (17.4-23.0 mg/ml) of unmodified chitosan against PA and LM. CPCs attenuated the biofilms of PA and LM by increasing the membrane permeability of bacteria embedded within the biofilms. Further, sub MIC of CPCs (0.5 × MIC) significantly reduced the biofilm adhesion (p < 0.001) by representative strains of LM (CCA: 72.2 ± 3.5, CFA: 79.3 ± 0.9, and CSA: 74.9 ± 1.5%) and PA (CCA: 64 ± 1.1, CFA: 67.8 ± 0.8, and CSA: 65.7 ± 4.9%). These results suggested the antibacterial and anti-biofilm potential of CPCs that can be exploited to control foodborne pathogenic infections.

Synthesis, characterization and crystal structure of 2-chloroethyl(methylsulfonyl)methanesulfonate

This is a study of structure – reactivity relationship of clomesone.

Antibiofilm agents: A new perspective for antimicrobial strategy

Biofilms are complex microbial architectures that attach to surfaces and encase microorganisms in a matrix composed of self-produced hydrated extracellular polymeric substances (EPSs). In biofilms, microorganisms become much more resistant to antimicrobial treatments, harsh environmental conditions, and host immunity. Biofilm formation by microbial pathogens greatly enhances survival in hosts and causes chronic infections that result in persistent inflammation and tissue damages. Currently, it is believed over 80% of chronic infectious diseases are mediated by biofilms, and it is known that conventional antibiotic medications are inadequate at eradicating these biofilm-mediated infections. This situation demands new strategies for biofilm-associated infections, and currently, researchers focus on the development of antibiofilm agents that are specific to biofilms, but are nontoxic, because it is believed that this prevents the development of drug resistance. Here, we review the most promising antibiofilm agents undergoing intensive research and development.