The influence of solvent formulations on thermosensitive hydroxybutyl chitosan hydrogel as a potential delivery matrix for cell therapy

Thermo-sensitive hydroxybutyl chitosan/diatom biosilica hydrogel with immune microenvironment regulatory for chronic wound healing

This study proposes a chronic wound therapeutic strategy based on extracellular matrix (ECM) biomimetics and immune regulation. The hydroxybutyl chitosan/diatom biosilica hydrogel (H/D) which can regulate the immune microenvironment, is prepared from hydroxybutyl chitosan (HBC) as matrix to construct the bionic ECM and diatom biosilica (DB) as structural active unit. The hierarchical porous structure of DB provides strong anchoring interface effect to enhance the mechanical strength of hydrogel, while maintaining its favorable temperature phase transition behavior, improving the material's fit to the wound and convenience of clinical use. Silicates released from DB in H/D accelerate the transition of wounds from inflammation to proliferation and remodeling. In cellular and diabetic rat models, H/D reduces inflammation (induces conversion of M1-type macrophages to M2-type), induces angiogenesis (1.96-fold of control), promotes fibroblast proliferation (180.36 % of control), collagen deposition, keratinocyte migration (47.34 % more than control), and re-epithelialization. This study validates a possible biological mechanism for H/D bioactive hydrogel-mediated regulation of the immune microenvironment and provides a simple synergistic dressing strategy.

Astragaloside IV (ASIV) Mediates Endothelial Progenitor Cell (EPC) Exosomal LINC01963 to Inhibit Pyroptosis and Oxidative Stress in High Glucose-impaired Endothelial Cells

BACKGROUND

Hyperglycemia is widespread in the world's population, increasing the risk of many diseases. This study aimed to explore the regulatory effect and mechanism of astragaloside IV (ASIV)-mediated endothelial progenitor cells (EPCs) exosomal LINC01963 in endothelial cells (HUVECs) impaired by high glucose.

METHODS

Morphologies of exosomes were observed by light microscope and electron microscope. Immunofluorescence was used to identify EPCs and detect the expressions of caspase-1. LINC01963 was detected by quantitative reverse transcription PCR. NLRP3, ASC, and caspase-3 were detected by Western Blot. Nanoparticle tracking analysis was carried out to analyze the exosome diameter. High-throughput sequencing was applied to screen target lncRNAs. The proliferation of endothelial cells was measured by cell counting kit-8 assay. The apoptosis level of HUVECs was detected by flow cytometry and TdT-mediated dUTP Nick-End labeling. The levels of IL- 1β, IL-18, ROS, SOD, MDA, and LDH were measured by enzyme-linked immunosorbent assay.

RESULTS

ASIV could promote the secretion of the EPC exosome. LINC01963 was obtained by high-throughput sequencing. It was observed that high glucose could inhibit the proliferation, reduce the level of SOD, the expression of NLRP3, ASC, and caspase- 1, increase the levels of IL-1β, IL-18, ROS, MDA, and LDH, and promote apoptosis of HUVECs. Whereas LINC01963 could inhibit the apoptosis of HUVECs, the increase the expression of NLRP3, ASC, and caspase-1, and decrease the levels of IL-1β, IL-18, ROS, MDA, and LDH.

CONCLUSION

EPCs exosomal LINC01963 play an inhibitory role in high glucoseinduced pyroptosis and oxidative stress of HUVECs. This study provides new ideas and directions for treating hyperglycemia and researching exosomal lncRNAs.

Development of Arabic gum-based AgTiO2 nanocomposite hydrogel as high efficient adsorbent of cationic dye methylene blue from water

The chemically crosslinked silver titanium dioxide embedded Arabic gum grafted polyacrylamide-polyacrylonitrile nanocomposite AgTiO₂@AG-g-P(AM-co-AN)was successfully synthesized and investigated by ATR-IR, XRD, and SEM. The synthesis optimization parameters of AG-g-P(AM-co-AN)were 5% AG, 1/0.5 AM/AN monomer molar ratio, 0.5 mg MBA cross-linker, and AgTiO₂ content (1%) gives AgTiO₂@AG-g-P(AM-co-AN) nanocomposite. While adsorption studies for AgTiO₂@AG-g-P(AM-co-AN) exhabited the maximum adsorption capacity (104.50 ± 3.02 mg/g) at concentration (150 mg/L), MB concentration (15 mg/L) and pH (8.0). The adsorption nonlinear kinetics models were used. Pseudo-second order governs the adsorption process, and the Langmuir model is more suited than Freundlich and Temkin.

Thermosensitive Chitosan-β-Glycerophosphate Hydrogels as Targeted Drug Delivery Systems: An Overview on Preparation and Their Applications

Today, with the advances in technology and science, more advanced drug delivery formulations are required. One of these new systems is an intelligent hydrogel. These systems are affected by the environment or conditions that become a gel, stay in the circumstance for a certain period, and slowly release the drug. As an advantage, only a lower dose of the drug is required, and it provides less toxicity and minor damage to other tissues. Hydrogels are of different types, including temperature-sensitive, pH-sensitive, ion change-sensitive, and magnetic field-sensitive. In this study, we investigated a kind of temperature-sensitive smart hydrogel, which has a liquid form at room temperature and becomes gel with increasing temperature. Chitosan-β-glycerophosphate hydrogels have been researched and used in many studies. This study investigates the various factors that influence the gelation mechanism, such as gel formation rates, temperature, pH, time, and gel specificity. Hydrogels are used in many drug delivery systems and diseases, including nasal drug delivery, vaginal drug delivery, wound healing, peritoneal adhesion, ophthalmic drug delivery, tissue engineering, and peptide and protein delivery. Overall, the chitosan-β-glycerophosphate hydrogel is a suitable drug carrier for a wide range of drugs. It shows little toxicity to the body, is biodegradable, and is compatible with other organs. This system can be used in different conditions and different medication ways, such as oral, nasal, and injection.

3D bioprinted neural tissue constructs for spinal cord injury repair

Three-dimensional (3D) bioprinting has emerged as a promising approach to fabricate living neural constructs with anatomically accurate complex geometries and spatial distributions of neural stem cells (NSCs) for spinal cord injury (SCI) repair. The NSC-laden 3D bioprinting, however, still faces some big challenges, such as cumbersome printing process, poor cell viability, and minimal cell-material interaction. To address these issues, we have fabricated NSC-laden scaffolds by 3D bioprinting and explore for the first time their application for in vivo SCI repair. In our strategy, we have developed a novel biocompatible bioink consisting of functional chitosan, hyaluronic acid derivatives, and matrigel. This bioink shows fast gelation (within 20 s) and spontaneous covalent crosslinking capability, facilitating convenient one-step bioprinting of spinal cord-like constructs. Thus-fabricated scaffolds maintain high NSC viability (about 95%), and offer a benign microenvironment that facilitates cell-material interactions and neuronal differentiation for optimal formation of neural network. The in vivo experiment has further demonstrated that the bioprinted scaffolds promoted the axon regeneration and decreased glial scar deposition, leading to significant locomotor recovery of the SCI model rats, which may represent a general and versatile strategy for precise engineering of central nervous system and other neural organs/tissues for regenerative medicine application.

Quantitative evaluation of the antibacterial effectiveness and efficiency of chitosan considering the effect of neutralization

In the present research, an optimized liquid medium which had no neutralizing effect to chitosan was developed. Moreover, magnesium chloride (MgCl₂) was identified to be able to absolutely neutralize the antibacterial activity of chitosan and its derivatives. Took the two results together, the minimum bactericidal concentration (MBC) and minimum inhibitory concentration (MIC) of chitosan were precisely quantified through a further improved method based on the optimized medium and the relation curve between antibacterial rate and reaction time was obtained with the help of MgCl₂ neutralizer. The MBC and MIC of chitosan were all 30 μg/mL against Staphylococcus aureus and Escherichia coli, and 100 μg/mL of chitosan acetate could reach 100 % of antibacterial rate within 3 min. Furthermore, coordination between magnesium ions and chitosan as well as reduced zeta potential of chitosan caused by coordination were inferred to be the neutralizing mechanism of MgCl₂ neutralizer.

Sustained release of human platelet lysate growth factors by thermosensitive hydroxybutyl chitosan hydrogel promotes skin wound healing in rats

This study evaluated the effect of thermosensitive hydroxybutyl chitosan (HBC) hydrogel loaded with human platelet lysate (hPL) on skin wound healing in rats. hPLs were generated by freeze-thaw method of platelet-rich plasma from healthy donors. Successful grafting of hydroxybutyl group to chitosan molecular chain to obtain HBC hydrogel was confirmed by Fourier-transform infrared spectroscopy. HBC/hPL was prepared by combining 10% (vol/vol) hPL with HBC solution. Surface morphologies were determined by Scanning Electron Microscopy, rheological properties were measured by rheometer, and sustained release of factors from HBC/hPL was measured by enzyme-linked immunoassay. We evaluated the in vitro effect of HBC/hPL on human umbilical cord vein endothelial cell (HUVEC) proliferation, migration, and tube formation. The effect of growth factors released from HBC/hPL in promoting skin wound healing was evaluated by gross observation, histology, immunohistochemistry, and immunofluorescence in vivo. Rheological analyses indicated the gelation temperatures of HBC and HBC/hPL were 17 and 14°C, respectively. ELISA showed sustained release of human platelet-derived growth factor, basic fibroblast growth factor, and transforming growth factor-β1 from HBC/hPL hydrogel. In vitro studies revealed HBC/hPL promoted greater levels of HUVECs proliferation, migration, and tube formation than the HBC and control groups. In vivo studies showed better wound healing, greater amounts of newly formed collagen, as well as neovascular and neo-epidermis markers in the wound site of HBC/hPL-treated group compared to the HBC and control groups. HBC/hPL is a promising potential therapeutic agent for promoting skin wound healing via the sustained release of growth factors.

HBC-nanofiber hydrogel scaffolds with 3D printed internal microchannels for enhanced cartilage differentiation

HBC-nanofiber hydrogel scaffolds with 3D printed internal microchannels have been developed to provide a multifunctional biomimetic microenvironment for hMSC chondrogenesis.

[A green route for the fabrication of thermo-sensitive chitosan nerve conduits and their property evaluation]

Objective

To explore a green route for the fabrication of thermo-sensitive chitosan nerve conduits, improve the mechanical properties and decrease the degradation rate of the chitosan nerve conduits.

Methods

Taking advantage of the ionic specific effect of the thermo-sensitive chitosan, the strengthened chitosan nerve conduits were obtained by immersing the gel-casted conduits in salt solution for ion-induced phase transition, and rinsing, lyophilization, and ⁶⁰Co sterilization afterwards. The nerve conduits after immersing in NaCl solutions for 0, 4, 12, 24, 36, 48, and 72 hours were obtained and characterized the general observation, diameters and mechanical properties. According to the above results, the optimal sample was chosen and characterized the microstructure, degradation properties, and cytocompatibility. The left sciatic nerve defect 15 mm in length was made in 20 male Sprague Dawley rats. The autologous nerves (control group, n=10) and the nerve conduits (experimental group, n=10) were used to repair the defects. At 8 weeks after operation, the compound muscle action potential (CMAP) was measured. The regenerated nerves were investigated by gross observation and toluidine blue staining. The gastrocnemius muscle was observed by HE staining.

Results

With the increased ionic phase transition time, the color of the conduit was gradually deepened and the diameter was gradually decreased, which showed no difference during 12 hours. The tensile strength of the nerve conduit was increased gradually. The ultimate tensile strength showed significant difference between the 48 hours and 12, 24, and 36 hours groups ( P<0.05), and no significant difference between the 48 hours and 72 hours groups ( P>0.05). As a result, the nerve conduit after ion-induced phase transition for 48 hours was chosen for further study. The scanning electron microscope (SEM) images showed that the nerve conduit had a uniform porous structure. The degradation rate of the the nerve conduit after ion-induced phase transition for 48 hours was significantly decreased as compared with that of the conduit without ion-induced phase transition. The nerve conduit could support the attachment and proliferation of rat Schwann cells on the inner surface. The animal experiments showed that at 8 weeks after operation, the CMAPs of the experimental and control groups were (3.5±0.9) and (4.3±1.1) m/V, respectively, which showed no significant difference between the two groups ( P<0.05), and were significantly lower than that of the contralateral site ［(45.6±5.6 m/V), P>0.05］. The nerve conduit of the experimental group could repair the nerve defect. There was no significant difference between the experimental and control groups in terms of the histomorphology of the regenerated nerve fibers and the gastrocnemius muscle.

Conclusion

The green route for the fabrication of thermo-sensitive chitosan nerve conduits is free of any toxic reagents, and has simple steps, which is beneficial to the industrial transformation of the chitosan nerve conduit products. The prepared chitosan nerve conduit can be applied to rat peripheral nerve defect repair and nerve tissue engineering.

Treatment of dry eye by intracanalicular injection of a thermosensitive chitosan-based hydrogel: evaluation of biosafety and availability

Chitosan has been increasingly considered for the design of implant materials in the field of translational medicine. However, implant properties addressing the complexity of the desired tissue still need to be developed. The focus of this study lies in the evaluation of a thermosensitive chitosan-based hydrogel for intracanalicular injection. Hydroxybutyl chitosan (HBC) solution was prepared, and its cytocompatibility was investigated by the CCK-8 assay using primary human corneal epithelial cells (HCEpiCs). Minimal cytotoxicity was seen in cultures with the HBC-extracting solution at a concentration of 0.2 g ml-1 for up to 72 h incubation. The biocompatibility and effectiveness, based on both a rabbit model and a human pilot study, were evaluated anatomically and functionally. The flow flux significantly decreased after HBC injection, with 76.9% of the flow flux occurring 10 min after HBC injection. Tear secretion significantly improved in the rabbit model. The density of PAS-positive cells gradually increased in the animal model. Various clinical indicators, which include the ocular surface disease index (OSDI) and tear break up time, have been improved greatly. Thermosensitivity promotes greater suitability for HBC intracanalicular injection to obstruct the lacrimal drainage system at body temperature. These results demonstrate that the thermosensitive chitosan-based hydrogel is suitable as a liquid plug for tear flow blockage and thus represents a promising candidate for translational medicine.

Optimization of the preparation conditions of thermo-sensitive chitosan hydrogel in heterogeneous reaction using response surface methodology

A thermo-sensitive hydroxybutyl chitosan (HBC) hydrogel was prepared by using 1,2‑butene oxide as an etherification modifying agent. To obtain the maximum yield of HBC, response surface methodology (RSM) was applied to optimize its preparation conditions. Key factors were chosen firstly by Plackett-Burman design (PBD) experiments, such as the concentration of NaOH, the ratio of isopropanol to water and reaction temperature. Steepest ascent experiments were employed to reach the top region of the response and determine the appropriate levels of three key factors. A three-level-three-variable Box-Behnken design (BBD) was used to further optimize the synthesis parameters. The results indicated that when the concentration of NaOH and the ratio of isopropyl alcohol to water were 40.65% and 2.68:1 at reaction temperature of 59 °C, respectively, the yield of HBC production was 5.897 ± 0.112 g and close to the predicted value (6.002 g), which demonstrated that the effectiveness of BBD model and the controllability for the yield of HBC in the heterogeneous reaction system.

Fabrication and characterization of collagen-based injectable and self-crosslinkable hydrogels for cell encapsulation

Injectable and self-crosslinkable hydrogels have drawn much attention for their potential application as cell delivery carriers to deliver cells to the injury site of arbitrary shape. In this study, injectable and self-crosslinkable hydrogels were designed and fabricated based on collagen type I (Col I) and activated chondroitin sulfate (CS-sNHS) by physical and chemical crosslinking without the addition of any catalysts. The physical properties of hydrogels, including mechanical properties, swelling and degradation properties, were investigated. The results demonstrated that the physical properties of hydrogels, especially the stiffness of hydrogels, were readily tuned by varying the degree of substitution (DS) of CS-sNHS without changing the concentration of collagen-based precursor. Chondrocytes were encapsulated into hydrogels to investigate the effects of hydrogels on the survival, proliferation and extracellular matrix (ECM) secretion of cells by FDA/PI staining, CCK-8 test and histological staining. The results suggested that all of these hydrogels supported the survival and ECM secretion of chondrocytes, while there was more ECM secretion around chondrocytes encapsulated in hydrogel Col I/CS-sNHS56% in which the DS of CS-sNHS was 56%. When the neutral precursor solution for hydrogel of Col I or Col I/CS-sNHS56% was subcutaneously injected into SD rats, hydrogels both displayed acceptable biocompatibility in vivo. These results imply that these injectable and self-crosslinkable hydrogels are suitable candidates for applications in the fields of cell delivery and tissue engineering.

Eco-friendly polyvinyl alcohol/carboxymethyl cellulose hydrogels reinforced with graphene oxide and bentonite for enhanced adsorption of methylene blue

Eco-friendly polyvinyl alcohol/carboxymethyl cellulose (isolated from pineapple peel) hydrogels reinforced with graphene oxide and bentonite were prepared as efficient adsorbents for methylene blue (MB). The structure and morphology of the prepared hydrogels were characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscope (SEM), X-ray diffraction (XRD), thermogravimetry (TG) and differential scanning calorimetry (DSC). Introducing graphene oxide and bentonite into the hydrogels evidently enhanced the thermal stability, swelling ability and MB adsorption capacity. The effects of initial concentration of MB, pH, contact time and temperature on MB adsorption capacity of the prepared hydrogels were investigated. Adsorption kinetics and equilibrium adsorption isotherm fitted pseudo-second-order kinetic model and Langmuir isotherm model well, respectively. After introducing graphene oxide and bentonite into the hydrogels, the maximum adsorption capacity calculated from the Langmuir isotherm model reached 172.14 mg/g at 30 °C, obviously higher than the hydrogels prepared without these additions (83.33 mg/g). Furthermore, all the prepared hydrogels also displayed good reusability for the efficient removal of MB. Consequently, the prepared hydrogels could be served as eco-friendly, stable, efficient and reusable adsorbents for anionic dyes in wastewater treatment.