Effect of oxidation time on the properties of cellulose nanocrystals from hybrid poplar residues using the ammonium persulfate

Nanocellulose extraction from acai bagasse through mixed acid hydrolysis and oxidative techniques

Exploring new biomass sources for nanocellulose (NC) extraction is crucial in elevating the economic value of readily available renewable resources. This study compares NC extracted from acai (Euterpe oleracea) bagasse using different methods: mixed acid hydrolysis, 2,2,6,6-tetramethylpiperidinyl-1-oxy (TEMPO) mediation, and ammonium persulfate (APS) oxidations. A comprehensive analysis investigates the impact of each treatment on the physical-chemical properties of the nanoparticles, including chemical structure, crystallinity, morphology, and thermal and suspension stability. NCs obtained through mixed acid hydrolysis exhibit the highest crystallinity (62 %) and low sulfate groups on their surfaces. Consequently, they demonstrate excellent thermal stability but poor colloidal stability in water. Oxidized NCs undergo chemical modification, converting alcoholic groups into carboxyl, resulting in NCs with zeta potentials ranging between -25.30 ± 0.81 and - 27.49 ± 1.07 mV. APS oxidation produces nanoparticles with superior thermal stability compared to TEMPO oxidation. Atomic Force Microscopy (AFM) images reveal that all nanocelluloses share characteristics of nanofibers (CNFs). This comprehensive characterization highlights the potential of acai bagasse for yielding high-added-value bioproducts suitable for versatile applications.

Isolation and Characterization of Spherical Cellulose Nanocrystals Extracted from the Higher Cellulose Yield of the Jenfokie Plant: Morphological, Structural, and Thermal Properties

Scholars are looking for solutions to substitute hazardous substances in manufacturing nanocellulose from bio-sources to preserve the world's growing environmental consciousness. During the past decade, there has been a notable increase in the use of cellulose nanocrystals (CNCs) in modern science and nanotechnology advancements because of their abundance, biocompatibility, biodegradability, renewability, and superior mechanical properties. Spherical cellulose nanocrystals (J-CNCs) were successfully synthesized from Jenfokie micro-cellulose (J-MC) via sulfuric acid hydrolysis in this study. The yield (up to 58.6%) and specific surface area (up to 99.64 m2/g) of J-CNCs were measured. A field emission gun-scanning electron microscope (FEG-SEM) was used to assess the morphology of the J-MC and J-CNC samples. The spherical shape nanoparticles with a mean nano-size of 34 nm for J-CNCs were characterized using a transmission electron microscope (TEM). X-ray diffraction (XRD) was used to determine the crystallinity index and crystallinity size of J-CNCs, up to 98.4% and 6.13 nm, respectively. The chemical composition was determined using a Fourier transform infrared (FT-IR) spectroscope. Thermal characterization of thermogravimetry analysis (TGA), derivative thermogravimetry (DTG), and differential thermal analysis (DTA) was conducted to identify the thermal stability and cellulose pyrolysis behavior of both J-MC and J-CNC samples. The thermal analysis of J-CNC indicated lower thermal stability than J-MC. It was noted that J-CNC showed higher levels of crystallinity and larger crystallite sizes than J-MC, indicating a successful digestion and an improvement of the main crystalline structure of cellulose. The X-ray diffraction spectra and TEM images were utilized to establish that the nanocrystals' size was suitable. The novelty of this work is the synthesis of spherical nanocellulose with better properties, chosen with a rich source of cellulose from an affordable new plant (studied for the first time) by stepwise water-retted extraction, continuing from our previous study.

Synthesis and characterization of polyaniline-based composites using cellulose nanocrystals as biological templates

Polyaniline (PANI) is considered as an ideal electrode material due to its remarkable Faradaic activity, exceptional conductivity, and ease of processing. However, the agglomeration and poor cycling stability of PANI largely limit its practical utilization in energy storage devices. To address these challenges, PANI was synthesized via a facile one-pot, two-step process using cellulose nanocrystals (CNCs) as bio-templates in this work. Zeta potential and particle size measurements revealed that the CNC template could impart improved dispersion stability to the synthesized PANI, which exhibited a decrease in average particle size from 1100 nm to 300 nm as a function of 10 % CNCs. Furthermore, the effect of CNC loadings on the performance of PANI was systematically investigated. The results showed that the specific capacitance of PANI/CNC increased from 102.52 F·g-1 to 138.12 F·g-1 with the CNC loading increase from 0 to 10 wt%. Particularly, the PANI/CNC composite film with a 1:9 ratio (C-P-10 %) demonstrated a capacity retention of 84.45 % after 6000 cycles and an outstanding conductivity of 526 S·m-1. This work generally offers an effective solution for the preparation of high-performance PANI-based composites, which might hold great promise in energy storage device applications.

Extraction of the cellulose nanocrystals via ammonium persulfate oxidation of beaten cellulose fibers

The effect of beating starting pulp was investigated on the oxidation efficiency of ammonium persulfate (APS), the yield, and the properties of the CNCs. The beaten pulp and the subsequent CNCs were characterized, respectively, by different techniques. The CNCs were classified as CNC1 and CNC2, dependent on ultrasonication. It showed that the beating exposed more free OH groups in the pulp and enhanced the yield and surface charges of CNCs. Compared to the CNC2, the CNC1 had a higher surface charge, higher crystallinity, higher thermal stability, shorter length, smaller length distribution, and slightly larger width. The CNC1 and CNC2 had similar rheological properties. For the beaten pulp with a beating degree of 25°SR, the yields of the CNC1 and the total CNCs reached the maximum, 42.65 and 34.11 %, respectively. The surface charges of the CNC1 and the CNC2 also reached the maximum, -44.5 and - 33.6 mV, respectively. Their crystallinity indexes were 80.07 and 75.42 %, respectively. The lengths of the CNC1 and the CNC2 were 157.31 ± 30.61 and 214.92 ± 65.52 nm, and their widths were 10.13 ± 2.74 and 9.43 ± 2.99 nm, respectively. Therefore, proper beating enhanced the APS oxidation efficiency and influenced the CNCs properties.

Oxidized Cellulose Nanocrystals from Durian Peel Waste by Ammonium Persulfate Oxidation

Cellulose nanocrystals (CNCs) have gained much attention due to their biodegradable, renewable, nontoxic, and inexpensive nanomaterials with some remarkable properties. In this study, cellulose nanocrystals from durian peel waste were isolated by chemical oxidation. This process involved two stages of a chemical process, namely, bleaching followed by oxidation of ammonium persulfate (APS). The impact of process parameters (APS concentrations and oxidation temperatures) on the oxidized CNC was assessed. The properties of CNC were investigated by attenuated total reflection-infrared (ATR-IR) spectroscopy, X-ray diffraction (XRD), thermogravimetric analysis (TGA), and transmission electron microscopy (TEM). ATR-IR results showed that the structure of cellulose did not change during APS oxidation. XRD results indicated that APS oxidation improved the crystallinity index by 103% due to the removal of the amorphous components. The resulting CNC was needlelike in shape and had an average width range of 5.00-7.81 nm, a length range of 114.52-126.83 nm, and an aspect ratio range of 16.76-24.20. From the TGA analysis, the thermal stability was found to increase with increasing oxidation temperature. The optimum conditions for a maximum crystallinity index and the highest thermal stability were obtained at 80°C oxidation with 1 M APS. Therefore, APS oxidation was a remarkable method for increasing the value of durian peel waste into high-value nanocellulose.

Impact of pulping routes of rice straw on cellulose nanoarchitectonics and their behavior toward Indigo dye

This work deals with emphasizing the relation between particle dimension distribution of nanocellulose (PDD) particles with its efficiency as stabilizing/adsorbent agent of Indigo dye. In this respect, different pulping reagents were used in preparation of Rice straw pulps as precursors for nanocelluloses using acid hydrolysis and oxidizing agents [(KMnO4 and NH4)2S2O8] methods. The PDD was estimated by indirect method through processing the TEM images using the software ImageJ. The resulting nanocelluloses were also characterized by X-ray diffraction (XRD) and Fourier-transform infrared spectra (FTIR) together with sulfate ester and carboxyl contents. The data showed the effective role of pulping reagent on PDD. The cellulose nanocrystals (CNCs) from NaOH-AQ pulp, with the longest crystal length (204.4 ± 107.8 nm) and the lowest diameter (6.7 ± 2.3 nm), exhibited most stabilized suspension of dye; however, the highest adsorption capacity was accompanied the oxidized nanocellulose (Ox-NC) from neutral RS pulp with lowest PDD (4.98 ± 1.6 and 90.5 ± 3.14), together with highest COO content (476.46 μmol/g).

Application of persulfate-based oxidation processes to address diverse sustainability challenges: A critical review

Over the past years, persulfate (PS) is widely applied due to their high versatility and efficacy in decontamination and sterilization. While treatment of organic chemicals, remediation of soil and groundwater, sludge treatment, disinfection on pathogen microorganisms have been covered by most published reviews, there are no comprehensive and specific reviews on its application to address diverse sustainability challenges, including solid waste treatment, resources recovery and regeneration of ecomaterials. PS applications mainly rely on direct oxidation by PS itself or the reactive sulfate radical (SO₄^•-) or hydroxyl radical (^•OH) from the activation of peroxodisulfate (PDS, S₂O₈^2-) or peroxymonosulfate (PMS, HSO₅^-) in SO₄^•--based advanced oxidation processes (SO₄^•--AOPs). From a broader perspective of environmental cleanup and sustainability, this review summarizes the various applications of PS except pollutant decontamination and elaborates the possible reaction mechanisms. Additionally, the differences between PS treatment and conventional technologies are highlighted. Challenges, research needs and future prospect are thus discussed to promote the development of the applications of PS-based oxidation processes in niche environmental fields. In all, this review is a call to pay more attention to the possibilities of PS application in practical resource reutilization and environmental protection except widely reported pollutant degradation.

Isolation and Properties of Cellulose Nanocrystals Fabricated by Ammonium Persulfate Oxidation from Sansevieria trifasciata Fibers

Cellulose nanocrystals (CNCs) were successfully prepared from Sansevieria trifasciata fibers (STFs) via ammonium persulfate (APS) oxidation in this study. The influences of the APS concentration (1.1, 1.5, and 1.9 M) and oxidation temperature (60, 70, and 80 °C) on the characteristics of CNCs were studied. The resulting CNCs were characterized using Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), transmission electron microscopy (TEM), and thermogravimetric analysis (TGA). The TEM observations revealed that the rod-like CNCs possessed average length and diameter ranges of 96 to 211 nm and 5 to 13 nm, respectively, which led to an aspect ratio range of 16–19. The optimum conditions for maximum crystallinity were achieved at an oxidation temperature of 70 °C, a reaction time of 16 h, and an APS concentration of 1.5 M. All CNCs exhibited lower thermal stability compared to the STFs. The CNCs could be produced from the STFs through the APS oxidation process and showed potential as nanocomposite reinforcement materials.

Oxidation treatment on wood cell walls affects gas permeability and sound absorption capacity

This research aimed to study the efficacy of oxidation in wood cell walls by ammonium persulfate solution and the performances in sound absorption coefficients and gas permeability for cross sectional Oak wood (Quercus mongolica) species. Reaction parameters were optimized and extensive instrumental characterization techniques were used to study cell wall modifications, such as X-ray photoelectron spectroscopy, X-ray diffraction, attenuated total reflectance Fourier transforms infrared spectroscopy, and scanning electron microscope. The oxidation treatment changed the chemical compositions of wood (hemicellulose, cellulose, and lignin), boosting wood porosity (12%) and gas permeability (39%). The effectiveness accelerates improvement of average sound absorption coefficient at each frequency range: 250-500 Hz (4.6%), 500-1000 Hz (26.8%), 1000-2000 Hz (31.8%), 2000-6400 Hz (57.8%) and overall 250-6400 Hz (47.1%) compared to the control samples. Simple wood oxidation treatment could be helpful for novel research and wood based sound absorption materials to manage the acoustic housing environment.

Hydrophobic up-conversion carboxylated nanocellulose/fluoride phosphor composite films modified with alkyl ketene dimer

Hydrophobic up-conversion nanocomposite films have been developed based on TEMPO-oxidized cellulose nanofibrils (TOCNF) modified with alkyl ketene dimer (AKD) as a matrix and MF₂:Ho (M = Ca, Sr) as a phosphor. Fabrication of homogeneous, strong and translucent TOCNF/MF₂:Ho-AKD films with water contact angle of 123 ± 2° was accomplished with mild drying at 110 °C. These hydrophobic nanocomposite films demonstrated stable up-conversion luminescence in the visible spectral range upon excitation of the ⁵I₇ level of Ho³⁺ ions by laser irradiation at 1912 nm both under ambient conditions and in a humid atmosphere (92 ± 2% humidity). The absence of luminescence quenching in a high humidity atmosphere for TOCNF/MF₂:Ho-AKD composite films was considered to be due to the reliable shielding effect of the hydrophobic TOCNF-AKD matrix. The films show promise for visualizing 2 μm laser radiation in medicine and monitoring of the atmosphere.

Synthesis and evaluation of protein-based biopolymer in production of silver nanoparticles as bioactive compound versus carbohydrates-based biopolymers

This overall process deals with evaluating the performance of silver nanoparticles, synthesized from sodium caseinate (SC) as green biological active agent, in comparison with widely produced from carboxymethyl cellulose, other carbohydrates (oxidized nanocellulose fibres (OC) and starch (St)). The TGA, FTIR and TEM, as well as its antimicrobial activities toward pathogenic Gram-positive and Gram-negative bacteria in addition to the yeast strain Candida albicans NRRL Y-477 were examined. In addition, with regard to their anti-tumour activity, the evaluation was studied via many cancer cell lines against RPE1 (normal retina cell line). The results revealed that the SC-Ag(I) and CMC-Ag(I) complexes were formed in six- and five-membered chelate rings, respectively, as nanoparticles, while linear chelation structure was formed in case of OC-Ag(I) and St-Ag(I) complexes. The complexation of SC with Ag(I) ions was recommended as promising stable and antimicrobial agent, with lower free Ag(I) ions and particle size than other Ag-complexes. Moreover, it provided anti-tumour activity of most tested cell lines (in vitro), with the following sequence HCT116 > PC3 > HePG 2 > MCF-7 > A549 with IC₅₀ and IC₉₀ values of 25.8 and 54.73 µg ml^-1, 45.1 and 66.7 µg ml^-1, 64.3 and 110.7 µgml^-1, 71.4 and 114.8 µgml^-1 and 80.1 and 127.7 µgml^-1, respectively. The promising effect of SC-Ag complex was also clear from its selective index versus RPE1 (normal retina cell line).

Selective Isolation Methods for Cellulose and Chitin Nanocrystals

This Minireview focuses on the selective isolation methods for the preparation of cellulose nanocrystals (CNCs) and chitin nanocrystals (ChNCs). Various selective preparation strategies with specific preparation conditions and reaction mechanisms are summarized. In particular, these selective reaction routes include controlled acid hydrolysis and selective oxidations at specific positions of cellulose or chitin fibers as well as particular reaction sites of the repeating monosaccharide building blocks of their main chains. These lead to selective cleavage of the ordered and non-ordered regions of cellulose and chitin and result in efficient production of CNCs and ChNCs.

Electric Field-Induced Assembly and Alignment of Silver-Coated Cellulose for Polymer Composite Films with Enhanced Dielectric Permittivity and Anisotropic Light Transmission

Multifarious wearable electronics with flexible touch screens have been invented for extensive outdoor activities. One challenge associated with these wearable electronics is the development of materials with both high dielectric permittivity and anisotropic light transmission, which is responsible for high touch sensitivity and screen peep-proof protection, respectively. Herein, we demonstrated a scalable approach for assembling and aligning anisotropic cellulose in a polymer matrix through the thickness direction via the assistance of an electric field to address this challenge. The alignment of silver-coated fibrillated celluloses in the polymer matrix not only significantly increases dielectric permittivity but also effectively enhances optical anisotropy. The impact of alignment degree and filler content on the dielectric and optical properties of polymer composite films has been systematically studied. The kinetics and aligning mechanisms of silver-coated fibrillated celluloses are revealed by in situ optical microscope images while an electric field is applied. We believe that this study provides a facile strategy to enhance both dielectric permittivity and optical anisotropy of polymer composite films by the alignment of embedding nanoparticles via an AC electric field, which is essential for future flexible electronics and display technology.

Synthesis of Nanofibrillated Cellulose by Combined Ammonium Persulphate Treatment with Ultrasound and Mechanical Processing

Ammonium persulfate has been known as an agent for obtaining nanocellulose in recent years, however most research has focused on producing cellulose nanocrystals. A lack of research about combined ammonium persulfate oxidation and common mechanical treatment in order to obtain cellulose nanofibrils has been identified. The objective of this research was to obtain and investigate carboxylated cellulose nanofibrils produced by ammonium persulfate oxidation combined with ultrasonic and mechanical treatment. Light microscopy, atomic force microscopy (AFM), powder X-Ray diffraction (PXRD), Fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA) and Zeta potential measurements were applied during this research. The carboxylated cellulose suspension of different fractions including nanofibrils, microfibrils and bundles were produced from bleached birch Kraft pulp fibers using chemical pretreatment with ammonium persulfate solution and further defibrillation using consequent mechanical treatment in a high shear laboratory mixer and ultrasonication. The characteristics of the obtained nanofibrils were: diameter 20–300 nm, crystallinity index 74.3%, Zeta potential −26.9 ± 1.8 mV, clear FTIR peak at 1740 cm⁻¹ indicating the C=O stretching vibrations, and lower thermostability in comparison to the Kraft pulp was observed. The proposed method can be used to produce cellulose nanofibrils with defined crystallinity.

Selective oxidation of cellulose, mediated by N-hydroxyphthalimide, under a metal-free environment

The generation of the phthalimide-N-oxyl (PINO) free radical from its N-hydroxylphthalimide (NHPI) precursor under a metal free environment, to selectively oxidize the primary OH groups in cellulose is reported.