Fabrication of cellulose acetate/polybenzoxazine cross-linked electrospun nanofibrous membrane for water treatment

Transforming textile waste into nanocellulose for a circular future

The expansion of the textile industry and improvements in living standards have led to increased cotton textile production, resulting in a rise in textile waste, with cotton accounting for 24% of total textile waste. Effective waste management through recycling and reuse is crucial to reducing global waste production. Nanocellulose has diverse applications in environmental, geotechnical, food packaging, and biomedical engineering areas. As interest in nanocellulose's unique properties grows, cotton-based textile waste emerges as a promising source for nanocellulose development. However, there is a notable lack of comprehensive reviews on the extraction of nanocellulose from textile waste as a sustainable biomaterial. This paper aims to address this gap by exploring current extraction processes, properties, and recent applications of nanocellulose derived from textile waste. We discussed (1) the potential of nanocellulose resources from different textile wastes, (2) a comparison of the various extraction methods, (3) the functionalization technology and the potential application of such nanocellulose in the textile industry, and (4) the life cycle assessment (LCA) and potential gap of the current technology. It also emphasizes the potential reintegration of extracted nanocellulose into the textile industry to manufacture high-value products, thus completing the loop and strengthening the circular economy.

Advances and applications of crosslinked electrospun biomacromolecular nanofibers

Electrospinning is a technology for fabricating ultrafine fibers from natural or synthetic polymers that have novel or enhanced functional properties. These fibers have found applications in a diverse range of fields, including the food, medicine, cosmetics, agriculture, and chemical industries. However, the tendency for electrospun nanofibers to dissociate when exposed to certain environmental conditions limits many of their practical applications. The structural integrity and functional attributes of these nanofibers can be improved using physical and/or chemical crosslinking methods. This review article discusses the formation of polymeric nanofibers using electrospinning and then describes how different crosslinking methods can be used to enhance their mechanical, thermal, and biological attributes. Methods for optimizing the crosslinking reactions are discussed, including proper selection of crosslinker type and reaction conditions. Then, food, medical, and separation applications of crosslinked electrospun fibers are assessed, including in bone and skin tissue engineering, wound healing, drug delivery, air filtration, water filtration, oil removal, food packaging, food preservation, and bioactive delivery. Finally, areas where future research are needed are highlighted, as well as possible future applications of crosslinked nanofibers.

Recent advances in cellulose-based sustainable materials for wastewater treatment: An overview

Water pollution presents a significant challenge, impacting ecosystems and human health. The necessity for solutions to address water pollution arises from the critical need to preserve and protect the quality of water resources. Effective solutions are crucial to safeguarding ecosystems, human health, and ensuring sustainable access to clean water for current and future generations. Generally, cellulose and its derivatives are considered potential substrates for wastewater treatment. The various cellulose processing methods including acid, alkali, organic & inorganic components treatment, chemical treatment and spinning methods are highlighted. Additionally, we reviewed effective use of the cellulose derivatives (CD), including cellulose nanocrystals (CNCs), cellulose nano-fibrils (CNFs), CNPs, and bacterial nano-cellulose (BNC) on waste water (WW) treatment. The various cellulose processing methods, including spinning, mechanical, chemical, and biological approaches are also highlighted. Additionally, cellulose-based materials, including adsorbents, membranes and hydrogels are critically discussed. The review also highlighted the mechanism of adsorption, kinetics, thermodynamics, and sorption isotherm studies of adsorbents. The review concluded that the cellulose-derived materials are effective substrates for removing heavy metals, dyes, pathogenic microorganisms, and other pollutants from WW. Similarly, cellulose based materials are used for flocculants and water filtration membranes. Cellulose composites are widely used in the separation of oil and water emulsions as well as in removing dyes from wastewater. Cellulose's natural hydrophilicity makes it easier for it to interact with water molecules, making it appropriate for use in water treatment processes. Furthermore, the materials derived from cellulose have wider application in WW treatment due to their inexhaustible sources, low energy consumption, cost-effectiveness, sustainability, and renewable nature.

Paper Supercapacitor Developed Using a Manganese Dioxide/Carbon Black Composite and a Water Hyacinth Cellulose Nanofiber-Based Bilayer Separator

Flexible and green energy storage devices have a wide range of applications in prospective electronics and connected devices. In this study, a new eco-friendly bilayer separator and primary and secondary paper supercapacitors based on manganese dioxide (MnO2)/carbon black (CB) are developed. The bilayer separator is prepared via a two-step fabrication process involving freeze-thawing and nonsolvent-induced phase separation. The prepared bilayer separator exhibits superior porosity of 46%, wettability of 46.5°, and electrolyte uptake of 194% when compared with a Celgard 2320 trilayer separator (39%, 55.58°, and 110%). Moreover, lower bulk resistance yields a higher ionic conductivity of 0.52 mS cm-1 in comparison to 0.22 mS cm-1 for the Celgard separator. Furthermore, the bilayer separator exhibits improved mean efficiency of 0.44% and higher specific discharge capacitance of 13.53%. The anodic and cathodic electrodes are coated on a paper substrate using MnO2/CB and zinc metal-loaded CB composites. The paper supercapacitor demonstrates a high specific capacitance of 34.1 mF cm-2 and energy and power density of 1.70 μWh cm-2 and 204.8 μW cm-2 at 500 μA, respectively. In summary, the concept of an eco-friendly bilayer cellulose separator with paper-based supercapacitors offers an environmentally friendly alternative to traditional energy storage devices.

Cross-linking electrospinning

Although electrospinning (e-spinning) has witnessed rapid development in recent years, it has also been criticized by environmentalists due to the use of organic solvents. Therefore, aqueous e-spinning (green e-spinning) is considered a more attractive technique. However, considering the poor water resistance and mechanical properties of electrospun (e-spun) nanofibers, cross-linking is a perfect solution. In this review, we systematically discuss the cross-linking e-spinning system for the first time, including cross-linking strategies (in situ, liquid immersion, vapor, and spray cross-linking), cross-linking mechanism (physical and chemical cross-linking) of e-spun nanofibers, and the various applications (e.g., tissue engineering, drug delivery, water treatment, food packaging, and sensors) of cross-linked e-spun nanofibers. Among them, we highlight several cross-linking methods, including UV light cross-linking, electron beam cross-linking, glutaraldehyde (and other commonly used cross-linking agents) chemical cross-linking, thermal cross-linking, and enzymatic cross-linking. Finally, we confirm the significance of cross-linking e-spinning and reveal the problems in the construction of this system.

Removal of Hexavalent Chromium(VI) from Wastewater Using Chitosan-Coated Iron Oxide Nanocomposite Membranes

Chromium is a toxic and carcinogenic heavy metal that originates from various human activities. Therefore, the effective removal of chromium from aqueous solutions is an extremely important global challenge. Herein, we report a chitosan-coated iron oxide nanoparticle immobilized hydrophilic poly(vinylidene) fluoride membrane (Chi@Fe₂O₃–PVDF) which can potentially be used for efficient removal of hexavalent chromium(VI) by a simple filtration process. Membrane filtration is an easy and efficient method for treating large volumes of water in a short duration. The adsorption experiments were conducted by batch and continuous in-flow systems. The experimental data showed rapid capture of hexavalent chromium (Cr(VI)) which can be explained by the pseudo-second-order kinetic and Langmuir isotherm model. The nanocomposite membrane exhibited high adsorption capacity for Cr(VI) (14.451 mg/g in batch system, 14.104 mg/g in continuous in-flow system). Moreover, its removal efficiency was not changed significantly in the presence of several competing ions, i.e., Cl⁻, NO₃⁻, SO₄²⁻, and PO₄³⁻. Consequently, the Chi@Fe₂O₃-PVDF-based filtration process is expected to show a promising direction and be developed as a practical method for wastewater treatment.

Porous Cellulose Acetate/Block Copolymer Membranes for the Recovery of Polyphenolic Compounds from Aquatic Environments

Polyphenols are natural compounds with strong antioxidant properties synthesized by plants and widely distributed in plant tissues. They compose a broad class of compounds that are commonly employed for multiple applications such as food, pharmaceutical, adhesives, biomedical, agricultural, and industrial purposes. Runoffs from these sources result in the introduction of polyphenols into aquatic environments where they further transform into highly toxic pollutants that can negatively affect aquatic ecosystems and humans. Therefore, the development of extraction and remediation methods for such compounds must be addressed. This study describes the identification and operation of a method to recover polyphenolic compounds from water environments by utilizing membrane-based separation. Composite membranes derived from electrospun cellulose acetate (CA) fibers and diblock copolymer (DiBCP) PEO-b-P4VP were prepared to evaluate the adsorption of polyphenolic compounds from aqueous environments. The highly porous CA fibers were developed using the electrospinning technique, and the fabricated DiBCP/CA membranes were characterized using scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), Fourier-transform infrared (FT-IR) spectroscopy, and tensile testing. Finally, the ability of the composite membranes to adsorb the soluble polyphenolic compounds catechol (CAT) and gallic acid (GA), from a wetland environment, was studied via batch adsorption experiments and by solid-phase extraction (SPE). Results revealed a successful recovery of both polyphenols, at concentrations within the parts per million (ppm) range, from the aqueous media. This suggests a novel approach to recover these compounds to prevent their transformation into toxic pollutants upon entrance to water environments.

Cellulose-Based Nanofibers Processing Techniques and Methods Based on Bottom-Up Approach-A Review

In the past decades, cellulose (one of the most important natural polymers), in the form of nanofibers, has received special attention. The nanofibrous morphology may provide exceptional properties to materials due to the high aspect ratio and dimensions in the nanometer range of the nanofibers. The first feature may lead to important consequences in mechanical behavior if there exists a particular orientation of fibers. On the other hand, nano-sizes provide a high surface-to-volume ratio, which can have important consequences on many properties, such as the wettability. There are two basic approaches for cellulose nanofibers preparation. The top-down approach implies the isolation/extraction of cellulose nanofibrils (CNFs) and nanocrystals (CNCs) from a variety of natural resources, whereby dimensions of isolates are limited by the source of cellulose and extraction procedures. The bottom-up approach can be considered in this context as the production of nanofibers using various spinning techniques, resulting in nonwoven mats or filaments. During the spinning, depending on the method and processing conditions, good control of the resulting nanofibers dimensions and, consequently, the properties of the produced materials, is possible. Pulp, cotton, and already isolated CNFs/CNCs may be used as precursors for spinning, alongside cellulose derivatives, namely esters and ethers. This review focuses on various spinning techniques to produce submicrometric fibers comprised of cellulose and cellulose derivatives. The spinning of cellulose requires the preparation of spinning solutions; therefore, an overview of various solvents is presented showing their influence on spinnability and resulting properties of nanofibers. In addition, it is shown how bottom-up spinning techniques can be used for recycling cellulose waste into new materials with added value. The application of produced cellulose fibers in various fields is also highlighted, ranging from drug delivery systems, high-strength nonwovens and filaments, filtration membranes, to biomedical scaffolds.

Trends on the Cellulose-Based Textiles: Raw Materials and Technologies

There is an emerging environmental awareness and social concern regarding the environmental impact of the textile industry, highlighting the growing need for developing green and sustainable approaches throughout this industry's supply chain. Upstream, due to population growth and the rise in consumption of textile fibers, new sustainable raw materials and processes must be found. Cellulose presents unique structural features, being the most important and available renewable resource for textiles. The physical and chemical modification reactions yielding fibers are of high commercial importance today. Recently developed technologies allow the production of filaments with the strongest tensile performance without dissolution or any other harmful and complex chemical processes. Fibers without solvents are thus on the verge of commercialization. In this review, the technologies for the production of cellulose-based textiles, their surface modification and the recent trends on sustainable cellulose sources, such as bacterial nanocellulose, are discussed. The life cycle assessment of several cellulose fiber production methods is also discussed.

High pressure laminates reinforced with electrospun cellulose acetate nanofibers

In the work, the non-woven cellulose acetate (CA) nanofiber mats were prepared via electrospinning, and CA nanofiber were incorporated into the core layer of the high-pressure laminates (HPLs). When the concentration of CA was 16 wt%, SEM images demonstrated that the morphology of the CA nanofiber mat was the best, with an average diameter of 654±246 nm. When CA nanofiber mats were incorporated into the core layer of HPLs, the mechanical properties of the resulted HPLs composites were significantly improved. Specifically, the tensile strength and elongation at break of the nanofiber mats reinforced HPLs composites increased remarkably to 40.8 ±1.1 MPa and 27.9 ± 0.9 %, respectively, which were nearly 6 times and 4.4 times higher than those of the pure HPLs. Furthermore, the incorporation of the CA nanofiber mats also significantly improved the flame retardancy of the HPLs, which was revealed from the thermogravimetric analysis (TGA) results.

Starch, cellulose, pectin, gum, alginate, chitin and chitosan derived (nano)materials for sustainable water treatment: A review

Natural biopolymers, polymeric organic molecules produced by living organisms and/or renewable resources, are considered greener, sustainable, and eco-friendly materials. Natural polysaccharides comprising cellulose, chitin/chitosan, starch, gum, alginate, and pectin are sustainable materials owing to their outstanding structural features, abundant availability, and nontoxicity, ease of modification, biocompatibility, and promissing potentials. Plentiful polysaccharides have been utilized for making assorted (nano)catalysts in recent years; fabrication of polysaccharides-supported metal/metal oxide (nano)materials is one of the effective strategies in nanotechnology. Water is one of the world's foremost environmental stress concerns. Nanomaterial-adorned polysaccharides-based entities have functioned as novel and more efficient (nano)catalysts or sorbents in eliminating an array of aqueous pollutants and contaminants, including ionic metals and organic/inorganic pollutants from wastewater. This review encompasses recent advancements, trends and challenges for natural biopolymers assembled from renewable resources for exploitation in the production of starch, cellulose, pectin, gum, alginate, chitin and chitosan-derived (nano)materials.

Compressible, Flame-Resistant and Thermally Insulating Fiber-Reinforced Polybenzoxazine Aerogel Composites

The preparation of novel polymer aerogel materials with enhanced flame-retardancy, superior thermal insulation and mechanical strength is of great practical significance in energy-savings and fire-prevention for buildings. Herein, we reported the fiber-reinforced polybenzoxazine (PBO) aerogel composites with flame retardance and thermal insulation, which were prepared under room temperature and atmospheric pressure, and using 4,4′-diaminodiphenlymethane (MDA) benzoxazine monomer as the raw material and oxalic acid (OA) as the catalyst. Several outstanding attributes were achieved in the aerogel composites, such as relatively low thermal conductivity (0.069 W/m·K at 10⁵ Pa, 0.031 W/m·K at 5 Pa), high limiting oxygen index (LOI) up to 32.5, and enhanced mechanical properties. It can be compressed to more than 80% of the deformation without obvious cracks, and shows high compressive modulus and specific modulus (20.69 MPa and 5.05 × 10⁴ N·m/Kg, respectively). All the excellent comprehensive properties mean that fiber-reinforced PBO aerogel composites have broad application prospects in the fields of flame retardancy and thermal insulation.

Biofunctionalized nanomaterials for in situ clean-up of hydrocarbon contamination: A quantum jump in global bioremediation research

Interfacing organic or inorganic nanoparticles with biological entities or molecules or systems with the aim of developing functionalized nano-scale materials or composites for remediation of persistent organic hydrocarbon pollutants (such as monocyclic and polycyclic aromatic hydrocarbons, MAH/PAH) has generated great interest and continues to grow almost unabated. However, the usefulness and potency of these materials or conjugates hinges over several key barriers, including structural assembly with fine-tuned control over nanoparticle/biomolecule ratio, spatial orientation and activity of biomolecules, the nano/bio-interface strategy and hierarchical architecture, water-dispersibility and long term colloidal stability in environmental media, and non-specific toxicity. The present review thus critically analyses, discusses and interprets recently reported attempts and approaches to functionalize nanoparticles with biomolecules. Since there is no comprehensive and critical reviews on the applications of nanotechnology in bioremediation of MAHs/PAHs, this overview essentially captures the current global scenario and vision on the use and future prospects of biofunctionalized nanomaterials with respect to their strategic interactions involved at the nano/bio-interface essential to understand and decipher the structural and functional relationships and their impact on persistent hydrocarbon remediation.

Novel Janus Fibrous Membranes with Enhanced Directional Water Vapor Transmission

Novel hydrophobic/hydrophilic Janus fibrous membranes, the poly[4,4′-methylenebis (phenylisocyanate)-alt-1,4-butanediol/di(propylene glycol)/plycaprolactone] (PU) fibrous membrane as the hydrophobic layer and cellulose acetate (CA) fibrous membrane as the hydrophilic layer, were fabricated by the so-called “layer-by-layer” electrospinning technology. A series of the PU/CA Janus membranes with different electrospinning time of the CA layers by which the thickness of hydrophilic layer can be controlled were also prepared to uncover its influence on the directional water vapor transmission. The results showed that water vapor transmission capability from the hydrophobic side to the hydrophilic side of the PU/CA Janus fibrous membrane was enhanced rather than that from the reverse direction of the same membrane. The optimal water vapor transmission capacity existed when the electrospinning time of CA fibrous membrane reached 15 min. Such enhanced water vapor transmission originated because of the asymmetric wettability of the Janus membrane and the strong force to draw tiny water droplet from the hydrophobic side to the hydrophilic side. The novel understanding is useful for facile designing and fabrication of efficient moisture permeable fabrics and clothing.