Rosin modified cellulose nanofiber as a reinforcing and co-antimicrobial agents in polylactic acid /chitosan composite film for food packaging

Acrylpimaric acid-modified chitosan derivatives as potential antifungal agents against Valsa Mali

In order to the antifungal activity of chitosan (CS) and to obtain a better natural bio-antimicrobial agent, CS was modified with acrylpimaric acid (APA). The grafting sites of APA on CS were controlled by adjusting the reaction time and the ratio of reactants to obtain APA grafted with CS C2-NH2 (NCSAA) and C6-OH (CSAA). Intermediates to protect C2-NH2 (PMCSAA) and final sample derivatives (PCSAA) were prepared using phthalic anhydride. The structural and crystal variations of the four derivatives were analyzed and determined by FTIR, 1H NMR and XRD. The in vitro antifungal activities of the four modified samples against V. mali, C. lunata, A. solani, F. oxysporum f. sp. niveum, and F. graminearum were evaluated by the mycelial growth rate method, and PCSAA was screened for optimal inhibitory effect on V. mali with an EC50 = 38.66 μg/mL. The SEM and TEM showed that these derivatives cause the loss of mycelial contents by disrupting the ultrastructure of the mycelium, destroying the internal structure of the mycelium, and preventing the cells from carrying out their normal life activities. In vivo experiments showed better curative effect (79.09 % ± 2.00) and protective effect (80.93 % ± 0.03) of PCSAA at 200 μg/mL.

Synergistic enhancement of high-barrier polylactic acid packaging materials by various morphological carbonized cellulose nanocrystals

The environmental challenges linked to petroleum-based polymers have accelerated the search for alternative materials like polylactic acid (PLA). Diverse nanofillers, ranging from inorganic to organic and hybrid inorganic/organic varieties, are employed to bolster PLA performance. Yet, non-synergistic nanofillers often underperform due to inadequate dispersion and singular functionality within the PLA matrix. This work introduces carbonized cellulose nanocrystals (GCNC) with rod-like (R-GCNC) and spherical structures (S-GCNC), as synergistic reinforcements for PLA matrix. Unlike traditional nanofillers, the highly graphitized carbon layer on GCNC effectively mitigates CNC agglomeration while preserving cellulose morphology, fostering improved interfacial interactions and hydrogen bonding within PLA matrix. Moreover, GCNC acts as a nucleating agent, boosting the crystallization rate of PLA and enhancing its mechanical properties. Remarkable synergistic reinforcing effects of GCNC on PLA performances were observed. Particularly, the tensile strength of R-GCNC 5 % and S-GCNC 5 % composites surged by 93 % and 76 %, elongation at break increased by 29.4 % and 33.3 %, Young's modulus rose by 37 % and 18 %, and cold crystallization temperature decreased by 11.5 °C and 12.9 °C. Additionally, the GCNC/PLA composites exhibited exceptional thermal stability, UV resistance, and water vapor permeability reduced by 46 % for R-GCNC, and 35 % for S-GCNC, making them promising for industrial and sustainable packaging.

Innovative synthesis approaches and health implications of organic-inorganic Nanohybrids for food industry applications

Recent advancements in nanomaterials have significantly impacted various sectors, including medicine, energy, and manufacturing. Among these, organic/inorganic nanohybrids have emerged as transformative tools in the food industry. This review focuses on the innovative applications of these nanohybrids in food packaging, enzyme immobilization, and contamination detection. By combining organic and inorganic components, nanohybrids enable the customization of properties such as barrier performance, mechanical strength, and antimicrobial activity. Organic-inorganic nanohybrids offer promising solutions for the food industry, enhancing safety, quality, and processing efficiency. Examples include gold nanoparticles (AuNPs) used in biosensors for rapid detection of foodborne pathogens, graphene oxide (GO) nanosheets in advanced filtration membranes, and nanocellulose as a fat replacer in low-fat yogurt to improve texture and taste. Quantum dots (QDs) also aid in food traceability by detecting product authenticity. While these technologies showcase transformative potential, challenges like scalability, regulatory compliance, environmental impact, and potential toxicity must be addressed to ensure safe and sustainable adoption. However, to fully harness their benefits, it is crucial to thoroughly assess their toxicological profiles to mitigate potential adverse health effects. This necessitates comprehensive studies on their interactions with biological systems, dose-response relationships, and long-term impacts. Establishing standardized safety protocols and regulatory guidelines is essential to ensure that the utilization of these nanomaterials does not compromise human health while maximizing their advantages.

Synergistic enhancement of hydrophobicity and mechanical properties of cellulose paper by (3-glycidoxypropyl) trimethoxy and rosin

Cellulose-based paper is inherently poor in hydrophobicity and mechanical strength, limiting its practical applications in daily life such as packaging materials, water-resistant labels, and disposable tableware. This study aimed to develop an effective and eco-friendly strategy to address these limitations by enhancing the hydrophobicity and mechanical properties of cellulose paper. To achieve this, an internal sizing agent was prepared by combining (3-glycidoxypropyl) trimethoxy (GPS) with natural rosin. This sizing agent was applied to cellulose paper, and its effectiveness was evaluated. Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) confirmed the successful introduction of rosin and GPS into the cellulose fiber network, forming covalent bonds. The variation in the microstructure and surface elemental distribution of the sizing cellulose paper was further analyzed by scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS). Thermogravimetric analysis (TGA) was conducted to evaluate the improved thermostability of the sizing cellulose paper. These structural improvements, including covalent bond formation and gap filling, contributed to the enhanced hydrophobicity and mechanical properties of the paper. This study provides a convenient and cost-effective approach to enhancing the functional properties of cellulose paper, offering new possibilities for its practical applications in eco-friendly packaging materials, disposable paper products, and high-performance paper-based packaging.

Advances in the enhancement of mechanical and hydrophobic properties of nanocellulose-based packaging materials: A review

As environmental issues are hotly debated worldwide, finding suitable materials to replace petroleum-based materials as the next-generation packaging materials has become a research hotspot. Nanocellulose, as a biomass material widely available in nature, is favored for application in green packaging materials due to its environmentally friendly and bio-friendly characteristics. However, the unstable mechanical properties and strong hydrophilicity of nanocellulose limit its practical application in packaging materials. This paper starts with a discussion of nanocellulose-based packaging materials and focuses on methods to improve their mechanical and hydrophobic properties. The discussion on mechanical properties focuses on the contribution of carbon nanomaterials, which is then combined with hydrophobic modifications (including plant polyphenol modification, esterification, acetylation, in situ polymerization, etc.) to illustrate the impact on the performance of packaging materials in use. The relationship between the hydrophobic characteristics of packaging materials derived from nanocellulose and their comprehensive mechanical properties is meticulously elucidated. Furthermore, a theoretical framework is proposed, positing that enhancing the hydrophobicity of these materials can indirectly augment their mechanical attributes. This insight offers pivotal guidance for the advancement of next-generation, high-performance packaging materials based on nanocellulose.

Biomimetic triggered release from hydroxyethyl cellulose @ Prussian blue microparticles for tri-modality biofilm removal

Human health is under growing threat from the increasing incidence of bacterial infections. Through their antimicrobial mechanisms, bacteria use appropriate strategies to overcome the antimicrobial effects of antibiotics. The enhanced effects of synergistic strategies on drug-resistant bacteria and biofilms have led to increasing interest in these approaches in recent years. Herein, biomimetic hydroxyethyl cellulose @ Prussian blue microparticles (HEC@PB MPs) generated by the gas-shearing method show a synergistic antibacterial property induced by antibiotic-, photothermal- and photodynamic- effect. MPs, as tri-modality antibacterial agents, exhibit ideal antibacterial activity and biofilm removal effect, and their mode of action on bacteria was investigated. Additionally, a drug release concept encouraged by the ROS-driven breakdown of cellulose, as seen in brown-rot fungi, was introduced. It combines ROS-responsive HEC and photodynamic PB and is likely to fit a niche in many applications.

Preparation and Antibacterial Properties of Poly (l-Lactic Acid)-Oriented Microporous Materials

In this manuscript, an efficient self-reinforcing technology-solid hot drawing (SHD) technology-was combined with green processing supercritical carbon dioxide (SC-CO2) foaming technology to promote poly (l-lactic acid) (PLLA) to form an oriented micropore structure. In addition, Polydimethylsiloxane (PDMS), with a high affinity of CO2 and biological safety, was introduced to enhance the nucleation effect in SC-CO2 foaming and co-regulate the uniformity of oriented micropores' structure. The results showed that orientation induced PLLA crystallization, so the tensile strength was improved; the maximum tensile strength of the oriented micropores' PLLA reached 151.2 MPa. Furthermore, the micropores mainly improved the toughness; the maximum elongation at break reached 148.3%. It is worth mentioning that PDMS can form an antibacterial film on the surface of the material, so that the material has a continuous antibacterial effect.

Synthesis, functionalization, and commercial application of cellulose-based nanomaterials

In recent times, cellulose, an abundant and renewable biopolymer, has attracted considerable interest due to its potential applications in nanotechnology. This review explores the latest developments in cellulose-based nanomaterial synthesis, functionalization, and commercial applications. Beginning with an overview of the diverse sources of cellulose and the methods employed for its isolation and purification, the review delves into the various techniques used for the synthesis of cellulose nanocrystals (CNCs) and cellulose nanofibers (CNFs), highlighting their unique properties and potential applications. Furthermore, the functionalization strategies employed to enhance the properties and tailor the functionalities of cellulose-based nanomaterials were discussed. The review also provides insights into the emerging commercial applications of cellulose-based nanomaterials across diverse sectors, including packaging, biomedical engineering, textiles, and environmental remediation. Finally, challenges and prospects for the widespread adoption of cellulose-based nanomaterials are outlined, emphasizing the need for further research and development to unlock their full potential in sustainable and innovative applications.

Application progress of rosin in food packaging: A review

Foodborne illness caused by Gram bacteria is the most important food safety issue worldwide. Food packaging film is a very important means to extend the shelf life of food. It reduces microbial contamination and provides food safety assurance during the sales process. However, the food packaging material is derived from plastic. Most plastics are not only non-degradable but also harmful to human health. Biodegradable natural polymers are an ideal substitute, but their poor mechanical properties, hydrophilicity and weak antibacterial properties limit their applications. Rosin is an oily pine ester in the pine family, which is a natural renewable resource with a wide range of sources. It is widely used in various fields, such as surfactants, adhesives, drug loading, antibacterial, etc. However, there are only a few reports on the application of rosin in food packaging. It is worth noting that the unique hydrogenated phenanthrene ring structure of rosin can enhance the thermal stability, hydrophobicity and antibacterial properties of food packaging. More importantly, rosin has a wide range of sources, good biocompatibility, and can be degraded in nature. These advantages are conducive to the application of rosin in food packaging. However, previous reviews focused on resins, silicone rubbers and surfactants. In this review we will focus on the application of rosin in food packaging.

Insights into the effect of carboxylated cellulose nanocrystals on mechanical and barrier properties of gelatin films for flexible packaging applications

In this study, gelatin/carboxylated cellulose nanocrystal (cCNC) bionanocomposite films were developed as an eco-friendly alternative to non-biodegradable flexible plastic packaging. Cellulose nanocrystals were modified by 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)-mediated oxidation (cCNC) to strategically interact with amino groups present in the gelatin macromolecular backbone. Gelatin/cCNC bionanocomposite films (0.5-6.0 wt% cCNC) obtained by solution casting were transparent to visible light while displayed high UV-blocking properties. The chemical compatibility between gelatin and cCNC was deepened by electrostatic COO-/NH3+ interactions, as detected by FTIR spectroscopy and morphologically indicated by scanning electron microscopy (SEM). Accordingly, Young's modulus and tensile strength of films were largely increased by 80 and 64 %, respectively, specifically near the cCNC percolation threshold (4 wt%), whereas the water vapor permeability (WVP) was reduced by 52 % at the optimum 6.0 wt% cCNC content in relation to the non-reinforced gelatin matrix (0.10 vs. 0.18 g H2O mm m-2 h-1 kPa-1). The oxygen transmission rates (OTR) of the gelatin/cCNC bionanocomposites were < 0.01 cm3 m-2 day-1, making them technically competitive to most promising biopolymers like polycaprolactone (PCL) and poly(lactic acid) (PLA). This study reveals how TEMPO-oxidized cellulose nanocrystals can broaden the performance of biodegradable gelatin films for use in packaging. The gelatin/cCNC bionanocomposites also represent an effective approach for designing newly sustainability-inspired flexible materials from the surface modification of nanocelluloses targeting specific interactions with protein structures.

Biomass based nanofiber membrane composite with xylan derived carbon dots for fluorescence detection nitrite in food real samples

In our latest research endeavor, we are proud to present an innovative approach to the synthesis of carbon dots (CDs) derived from the biomass xylan, which we have termed P-CDs. These P-CDs are meticulously integrated with a state-of-the-art biomass nanofiber membrane composed of polycaprolactone (PCL) and polylactic acid (PLA), resulting in the creation of a novel solid-state fluorescent sensor, designated as NFP-CDs. This cutting-edge sensor has been meticulously engineered for the highly sensitive and specific detection of nitrite ions (NO2-), a critical parameter in various fields. The NFP-CDs sensor stands out for its user-friendly design, cost-effective production, and portable nature, making it an ideal choice for rapid and visible nitrite ion detection. It exhibits an extraordinary response time of less than 1 s, which is a testament to its high sensitivity. Furthermore, the sensor demonstrates exceptional selectivity and specificity, with a remarkably low detection threshold of 0.36 μM. This is achieved through a sophisticated dual detection mechanism that synergistically combines colorimetric and spectral analyses, ensuring accurate and reliable results. In addition to its impressive technical specifications, the NFP-CDs sensor has been rigorously tested and validated for its efficacy in detecting nitrite ions in real-world samples. These samples include a diverse range of food products such as rock sugar, preserved mustard, kimchi, and canned fish. The sensor has demonstrated a remarkable recovery rate, which varies from 99 % to 106 %, highlighting its potential for practical application in nitrite ion detection. This research not only offers a robust and effective strategy for the detection of nitrite ions but also carries profound implications for enhancing food safety and bolstering environmental monitoring efforts. The development of the NFP-CDs sensor represents a significant step forward in the field of sensor technology, providing a powerful tool for the detection of nitrite ions and contributing to the broader goals of public health and environmental stewardship.

Characterization of TEMPO-Oxidized Cellulose Nanofiber From Biowaste and Its Influence on Molecular Behavior of Fluorescent Rhodamine B Dye in Aqueous Suspensions

Cellulose nanofiber (CNFs) obtained through TEMPO oxidation was structurally characterized using FT-IR (Fourier Transformed Infrared) and SEM (Scanning Electron Microscopy) spectroscopy. The molecular aggregation and spectroscopic properties of Rhodamine B (Rh-B) in CNFs suspension were investigated using molecular absorption and steady-state fluorescence spectroscopy techniques. The interaction between CNFs particles in the aqueous suspension and the cationic dye compound was examined in comparison to its behavior in deionized water. This interaction led to significant changes in the spectral features of Rh-B, resulting in an increase in the presence of H-dimer and H-aggregate in CNFs suspension. The H-type aggregates of Rh-B in CNFs suspensions were defined by the observation of a blue-shifted absorption band compared to that of the monomer. Even at diluted dye concentrations, the formation of Rh-B's H-aggregate was observed in CNFs suspension. The pronounced aggregation in suspensions originated from the strong interaction between negatively charged carboxylate ions and the dye. The aggregation behavior was discussed with deconvoluted absorption spectra. Fluorescence spectroscopy studies revealed a significant reduction in the fluorescence intensity of the dye in CNFs suspension due to H-aggregates. Furthermore, the presence of H-aggregates in the suspensions caused a decrease in the quantum yield of Rh-B compared to that in deionized water.

Development of highly bacterial filtration efficient and antibacterial cellulose acetate/gum rosin composite nanofibers for facemask application

Cellulose acetate (CA) is a non-toxic, renewable, and biodegradable polymeric material that can be effectively electrospuned into bacterial filtration efficient nanofiber membrane for face mask application. However, its fragile and non-antibacterial nature influenced its scalability. In this context, natural antibacterial gum rosin (GR) additive can be explored. Therefore, the present study aimed to produce a CA/GR composite nanofibers membrane for the finest bacterial filtration, excellent antibacterial moiety, and improved tensile properties for facemask application. Hence, in this work, we have studied the effect of GR concentrations (0-15 g) on the needleless electrospinning behavior and fibers' morphology through rheology, electrical conductivity, and SEM analysis. These analyses revealed that GR significantly affects the fibers' spinning behavior, morphology, and diameter of the produced fibers. Later, ATR-FTIR spectroscopy mapped the functional changes in the produced nanofibers that affirmed the integration of GR with CA polymer. This modification resulted in a 3-fold rise in tensile strength and an 11-fold decline in elongation% in 15 g CA/GR composite nanofibers membrane than the control sample. Furthermore, it has shown 98.79 ± 0.10% bacterial filtration efficiency and ∼ 93 % reduction in Staphylococcus Aureus and Klebsiella Pneumoniae bacterial growth, elucidating a high-efficiency level for potential facemask application.

Advances in the Design of Functional Cellulose Based Nanopesticide Delivery Systems

The advancement of science and technology, coupled with the growing environmental consciousness among individuals, has led to a shift in pesticide development from traditional methods characterized by inefficiency and misuse toward a more sustainable and eco-friendly approach. Cellulose, as the most abundant natural renewable resource, has opened up a new avenue in the field of biobased drug carriers by developing cellulose-based drug delivery systems. These systems offer unique advantages in terms of deposition rate enhancement, modification facilitation, and environmental impact reduction when designing nanopesticides. Consequently, their application in the field of nanoscale pesticides has gained widespread recognition. The present study provides a comprehensive review of cellulose modification methods, carrier types for cellulose-based nanopesticides delivery systems (CPDS), and various stimulus-response factors influencing pesticide release. Additionally, the main challenges in the design and application of CPDS are summarized, highlighting the immense potential of cellulose-based materials in the field of nanopesticides.

Current progress in functionalization of cellulose nanofibers (CNFs) for active food packaging

There is a growing interest in utilizing renewable biomass resources to manufacture environmentally friendly active food packaging, against the petroleum-based polymers. Cellulose nanofibers (CNFs) have received significant attention recently due to their sustainability, biodegradability, and widely available sources. CNFs are generally obtained through chemical or physical treatment, wherein the original surface chemistry and interfacial interactions can be changed if the functionalization process is applied. This review focuses on promising and sustainable methods of functionalization to broaden the potential uses of CNFs in active food packaging. Novel aspects, including functionalization before, during and after cellulose isolation, and functionalization during and after material processing are addressed. The CNF-involved structural construction including films, membranes, hydrogels, aerogels, foams, and microcapsules, is illustrated, which enables to explore the correlations between structure and performance in active food packaging. Additionally, the enhancement of CNFs on multiple properties of active food packaging are discussed, in which the interaction between active packaging systems and encapsulated food or the internal environment are highlighted. This review emphasizes novel approaches and emerging trends that have the potential to revolutionize the field, paving the way for advancements in the properties and applications of CNF-involved active food packaging.

Formulation and application of poly lactic acid, gum, and cellulose-based ternary bioplastic for smart food packaging: A review

In future, global demand for low-cost-sustainable materials possessing good strength is going to increase tremendously, to replace synthetic plastic materials, thus motivating scientists towards green composites. The PLA has been the most promising sustainable bio composites, due to its inherent antibacterial property, biodegradability, eco-friendliness, and good thermal and mechanical characteristics. However, PLA has certain demerits such as poor water and gas barrier properties, and low glass transition temperature, which restricts its use in food packaging applications. To overcome this, PLA is blended with polysaccharides such as gum and cellulose to enhance the water barrier, thermal, crystallization, degradability, and mechanical properties. Moreover, the addition of these polysaccharides not only reduces the production cost but also helps in manufacturing packaging material with superior quality. Hence this review focuses on various fabrication techniques, degradation of the ternary composite, and its application in the food sector. Moreover, this review discusses the enhanced barrier and mechanical properties of the ternary blend packaging material. Incorporation of gum enhanced flexibility, while the reinforcement of cellulose improved the structural integrity of the ternary composite. The unique properties of this ternary composite make it suitable for extending the shelf life of food packaging, specifically for fruits, vegetables, and fried products. Future studies must be conducted to investigate the optimization of formulations for specific food types, explore scalability for industrial applications, and integrate these composites with emerging technologies (3D/4D printing).

Synthesis, characterization and antifungal properties of maleopimaric anhydride modified chitosan

Fruit spoilage can cause huge economic losses, in which fungal infection is one of the main influencing factors, how to effectively control mould and spoilage of fruits and prolong their shelf-life has become a primary issue in the development of fruit and vegetable industry. In this study, rosin derivative maleopimaric anhydride (MPA) was combined with biodegradable and antifungal chitosan (CS) to enhance its antifungal and preservative properties. The modified compounds were characterized by FTIR, 1H NMR spectra and XRD, and the in vitro antifungal properties of the modified compounds were evaluated by the radial growth assay and the minimal inhibitory concentration assay. The preservation effect on small mandarin oranges and longan was studied. The analysis revealed that the modification product (CSMA) of MPA access to C6-OH of CS had a better antifungal effect. In addition, CSMA was more environmentally friendly and healthier than the commercially available chemical preservative (Imazalil), and had the same antifungal preservative effect in preserving small mandarin orange, and was able to extend the shelf life to >24 d. In the preservation of longan, CSMA was more effective against tissue water loss and was able to maintain the moisture in the longan pulp and extend the shelf life. Therefore, CSMA has good application potentials in longan keeping-fresh.

Tailoring Hydronium ion Driven Dissociation-Chemical Cross-Linking for Superfast One-Pot Cellulose Dissolution and Derivatization to Build Robust Cellulose Films

Concepts of sustainability must be developed to overcome the increasing environmental hazards caused by fossil resources. Cellulose derivatives with excellent properties are promising biobased alternatives for petroleum-derived materials. However, a one-pot route to achieve cellulose dissolution and derivatization is very challenging, requiring harsh conditions, high energy consumption, and complex solubilizing. Herein, we design a one-pot tailoring hydronium ion driven dissociation-chemical cross-linking strategy to achieve superfast cellulose dissolution and derivatization for orderly robust cellulose films. In this strategy, there is a powerful driving force from organic acid with a pKa below 3.75 to dissociate H+ and trigger the dissolution and derivatization of cellulose under the addition of H2SO4. Nevertheless, the driving force can only trigger a partial swelling of cellulose but without dissolution when the pKa of organic acid is above 4.26 for the dissociation of H+ is inhibited by the addition of inorganic acid. The cellulose film has high transmittance (up to ∼90%), excellent tensile strength (∼122 MPa), and is superior to commercial PE film. Moreover, the tensile strength is increased by 400% compared to cellulose film prepared by the ZnCl2 solvent. This work provides an efficient solvent, which is of great significance for emerging cellulose materials from renewable materials.

Development and characterization of starch/PVA antimicrobial active films with controlled release property by utilizing electrostatic interactions between nanocellulose and lauroyl arginate ethyl ester

The two nanocellulose (nanofibrillated cellulose (NFC) and carboxylated nanofibrillated cellulose (C-NFC)) could interact with lauryl arginine ethyl ester hydrochloride (LAE) through electrostatic bonding. The zeta potential (absolute value) of C-NFC (-27.80 mV) was higher than that of NFC (-10.07 mV). The starch/polyvinyl alcohol active films with controlled release property by utilizing electrostatic interactions between nanocellulose and LAE were prepared and their properties were investigated. For incorporation of the NFC or C-NFC, the cross-section of the films became slightly uneven and some fibrils were observed, the films exhibited an increase in strength, while the film water vapor and oxygen barrier properties decreased. The release of LAE from the films to food simulants (10 % ethanol) decelerated with increasing of NFC or C-NFC. These might be mainly attributed to the enhanced electrostatic interaction between NFC or C-NFC and LAE. It demonstrated that nanocellulose with higher negative charges would exhibit stronger electrostatic interaction with LAE, thus slowing the release of LAE. The film with highest C-NFC content exhibited smallest inhibition zone among LAE-containing films, which was related with its slowest release rate of LAE. It showed a great prospect to develop controlled release active packaging films by utilizing electrostatic interactions between substances.

Sulfonated cellulose nanocrystal modified with ammonium salt as reinforcement in poly(lactic acid) composite films

Poly(lactic acid) (PLA) composites reinforced with cellulose nanocrystals (CNCs) are promising biodegradable materials. However, the poor compatibility and dispersion of CNCs in the PLA matrix remain a significant obstacle to improving the properties of composites. In this study, the modified CNC (CNC-D) was prepared through sulfonation treatment, followed by modification with didecyl dimethyl ammonium chloride (DDAC). Then, CNC-D was mixed with PLA to prepare composite films (PLA-CNC-D). The results revealed that the PLA-CNC-D had higher tensile strength and elongation at break than PLA-CNC at 3 wt% nanofiller content, increasing by 41.53 and 22.18 %, respectively. SEM and DSC analysis indicated that surface modification improved the compatibility and dispersion of CNC-D in the PLA matrix. The sulfonation process increased the anion content on the surface of CNC-D, enabling the CNC-D surface to adsorb more cationic DDAC, consequently sharply reducing the hydrophilicity of CNC-D. Moreover, the PLA-CNC-D exhibited excellent antibacterial activity against S. aureus and E. coli. In summary, this study provides a novel CNC modification approach to enhance the physical properties and antibacterial activity of PLA composite films, enlarging the application of degradable PLA composites.

Synthesis, characterization and antifungal properties of dehydroabietic acid modified chitosan

The bioactivities of pristine chitosan are considerable weak compared with the commercial chemicals, which has restricted its broad application prospects in food packaging and preservation. In order to obtain a safe, biologically derived fruits preservative with excellent antifungal properties, dehydroabietic acid (DHA) was used to modify chitosan (CS). The structural characterization of modified chitosans were identified by FTIR and 1H NMR spectra. The XRD pattern showed the modified chitosan changed the crystal structure due to the modification of the amino and/or hydroxyl groups on the chitosan. Their antifungal activities against Penicillium digitutim and Penicillium italicum were investigated in vitro using the radial growth assay and the minimal inhibitory concentration assay. The study also examined the differences in antifungal effect among three modified chitosans. The results showed that DHA only conjugated thehydroxyl group at C-6, bearing free amino group at C-2, exhibited the strongest antifungal effect, with a minimum inhibitory concentration (MIC) of 200 μg/mL. In addition, a comparison of the antifungal activity of the modified compounds with different concentrations of Imazalil demonstrated that the modified biologic antifungal agent was as effective as Imazalil. CSDA can achieve 100 % inhibition of P. digitutim at concentrations >100 μg/mL and remain unchanged for a long time. Because CSDA can enhance the shelf life of longans, DHA-CS, chitosan derivatives, have tremendous promise for use in fruits preservation.

Effect of rosin based quaternary ammonium salt on mechanical, hydrophily, antibacterial of cornstarch/polydopamine film for food packaging

Food packaging made of biobased materials is environmentally friendly, among which starch film is a type of biobased packaging with great development value. Some existing studies have attempted to add polydopamine (PDA) to enhance cross-linking, but there are still problems such as weakness and hydrophilicity, which greatly limit its application. Therefore, this study synthesized rosin based quaternary ammonium salt-modified cornstarch (ST-B), which was used to replace part of unmodified cornstarch (ST). In the prepared ST/PDA0.5/ST-B5 film, the introduction of a rigid rosin structure increased the stress and water contact angle of the ST/PDA0.5 film by 62 % and 26 %, respectively, while reducing its wettability and WVP; thus, further enhancing its antioxidant activity. Due to the antibacterial ability of rosin quaternary ammonium cations, the packaging film containing 7 wt% ST-B can kill >94.6 % of S. aureus and 99.9 % of E. coli, and can also extend the shelf life of strawberries. In addition, it is proven that the packaging film has good biocompatibility and high safety within cytotoxicity tests and 30-day gavage tests in mice. Therefore, the prepared ST/PDA/ST-B film has more potential for application in food preservation.

Fabrication and characterization of transparent nanocomposite films based on poly (lactic acid)/polyethylene glycol reinforced with nano glass flake

Developing new biodegradable packaging with superior properties and advanced functionalities is one of the most emerging research areas of interest in food packaging. In this study, PLA/PEG-based nanocomposite films incorporated with different amounts of nano glass flake (NGF) (0, 0.5, 1, and 2 phr) were fabricated via casting solution for applications in food packaging. The ATR-FTIR displayed no chemical interaction between the PLA/PEG-based matrix and NGF particles. The scanning electron microscopy (SEM) observations exhibited a relatively smooth and homogeneous surface without defects. Incorporation of the NGF into the PLA/PEG-based matrix did not affect the color and opacity of the fabricated films. The prepared nanocomposite films were highly transparent and exhibited superior properties such as increased hydrophobicity, appreciable oxygen barrier properties, and enhanced thermal stability. Dynamic mechanical thermal analysis (DMTA) and differential scanning calorimetry (DSC) analysis confirmed the existence of a single glass-transition temperature (Tg) as evidence of miscibility. According to the research results, the PLA/PEG/NGF1 nanocomposite film significantly offered the best overall performance. This work has developed new insight into the potential application of nano glass flakes in food packaging.

Facile fabrication of cellulose-based hydrophobic paper via Michael addition reaction

The inherent highly hydrophilic feature of cellulose-based paper hinders its application in many fields. Herein, a cellulose-based hydrophobic paper was fabricated based on surface chemical modification. Firstly, the hydrophobic acrylate components were bonded to the cellulose acetoacetate (CAA) fibers to obtain CAA graft acrylate (CAA-X) fibers through Michael addition reaction. Subsequently, CAA-X fibers were processed into paper via wet papermaking technology. The resulting paper exhibited good hydrophobic performance (water contact angle was up to 135°) with an air permeability of 24.8 μm/Pa·s. The hydrophobicity of paper was very stable and remained even after treating with different solvents. Moreover, the hydrophobic properties of this paper could be adjusted by changing the type of acrylate component. It should be noted that the surface modification strategy has no obvious effects on the whiteness (79.8%), writing, and printing properties of the cellulose fibers. Thus, it is a simple, benign, and efficient strategy for the construction of cellulose-based hydrophobic paper, which has great potential to be used in paper tableware, oil-water separation, watercolor protection, and food packaging fields.

Xylan derived carbon dots composite with PCL/PLA for construction biomass nanofiber membrane used as fluorescence sensor for detection Cu2+ in real samples

Water and soil pollution caused by Cu2+ is not conducive to sustainable development of environment and could cause damage to environment and even human body. Currently, fluorescent sensor solutions analysis method has been used for Cu2+ detection, but they also suffer from drawbacks including easy leakage, difficult storage, and inaccurate. Herein, a green solid-state biomass fluorescence platform (NBU-CDs) consisting of xylan-derived carbon dots (U-CDs) and polylactic acid/polycaprolactone (PLA/PCL) was designed by using in situ electrospinning technology. The prepared NBU-CDs fluorescence platform showed good fluorescence effect and can be served as fluorescence sensor for detecting Cu2+ with high sensitively, selectively and low detection limit (LOD = 0.83 μM). The practical applications of NBU-CDs exhibited high specificity for Cu2+ detection in zebrafish, water samples (school lake, Xuanwu Lake and Yangtze River) with high recovery rates of 97 %-104 % and soil (pond soil, grassland soil and bamboo soil) samples, respectively. The developed fluorescence platform was utilized to predict water and soil safety by monitoring Cu2+ concentration and provides a new strategy for Cu2+ detection.

Direct Induction of Porous Graphene from Mechanically Strong and Waterproof Biopaper for On-Chip Multifunctional Flexible Electronics

Graphene with a 3D porous structure is directly laser-induced on lignocellulosic biopaper under ambient conditions and is further explored for multifunctional biomass-based flexible electronics. The mechanically strong, flexible, and waterproof biopaper is fabricated by surface-functionalizing cellulose with lignin-based epoxy acrylate (LBEA). This composite biopaper shows as high as a threefold increase in tensile strength and excellent waterproofing compared with pure cellulose one. Direct laser writing (DLW) rapidly induces porous graphene from the biopaper in a single step. The porous graphene shows an interconnected carbon network, well-defined graphene domains, and high electrical conductivity (e.g., ≈3 Ω per square), which can be tuned by lignin precursors and loadings as well as lasing conditions. The biopaper in situ embedded with porous graphene is facilely fabricated into flexible electronics for on-chip and paper-based applications. The biopaper-based electronic devices, including the all-solid-state planer supercapacitor, electrochemical and strain biosensors, and Joule heater, show great performances. This study demonstrates the facile, versatile, and low-cost fabrication of multifunctional graphene-based electronics from lignocellulose-based biopaper.

Nano hydrogel-based oxygen-releasing stem cell transplantation system for treating diabetic foot

The employment of stem cells and hydrogel is widespread in contemporary clinical approaches to treating diabetic foot ulcers. However, the hypoxic conditions in the surrounding lesion tissue lead to a low stem cell survival rate following transplantation. This research introduces a novel hydrogel with superior oxygen permeability and biocompatibility, serving as a vehicle for developing a stem cell transplantation system incorporating oxygen-releasing microspheres and cardiosphere-derived stem cells (CDCs). By optimizing the peroxidase fixation quantity on the microsphere surface and the oxygen-releasing microsphere content within the transplantation system, intracellular oxygen levels were assessed using electron paramagnetic resonance (EPR) under simulated low-oxygen conditions in vitro. The expression of vascularization and repair-related indexes were evaluated via RT-PCR and ELISA. The microspheres were found to continuously release oxygen for three weeks within the transplantation system, promoting growth factor expression to maintain intracellular oxygen levels and support the survival and proliferation of CDCs. Moreover, the effect of this stem cell transplantation system on wound healing in a diabetic foot mice model was examined through an in vivo animal experiment. The oxygen-releasing microspheres within the transplantation system preserved the intracellular oxygen levels of CDCs in the hypoxic environment of injured tissues. By inhibiting the expression of inflammatory factors and stimulating the upregulation of pertinent growth factors, it improved the vascularization of ulcer tissue on the mice's back and expedited the healing of the wound site. Overall, the stem cell transplantation system in this study, based on hydrogels containing CDCs and oxygen-releasing microspheres, offers a promising strategy for the clinical implementation of localized stem cell delivery to improve diabetic foot wound healing.

Fabrication of bacterial cellulose composites with antimicrobial properties by in situ modification utilizing the specific function-suspension containing water-insoluble magnolol

In situ modification is commonly employed for Bacterial cellulose (BC) functionalization. However, water-insoluble modifiers are usually deposited at the bottom of the medium, therefore cannot be used for in situ modification of BC. Herein, a novel strategy for in situ modification of insoluble modifiers after suspension by a suspending agent was proposed. The BC-producing strain Kosakonia oryzendophytica FY-07, not Gluconacetobacter xylinus, was selected to prepare BC products with antibacterial activity because of its tolerance to natural antibacterial products. The experimental results showed that xanthan gum as a suspending agent can uniformly and stably disperse water-insoluble plant extracts magnolol in the culture medium to prepare the in situ modified BC products. Characterization of the properties showed that the in situ modified BC products have reduced crystallinity, significantly increased swelling ratio and strong inhibition on Gram-positive bacteria and fungi and weak inhibition on Gram-negative bacteria. Furthermore, the in situ modified BC products had no toxicity to cells. This study provided a feasible strategy for in situ modification of BC using water-insoluble modifiers to extend BC functionality and has significant implications for the biopolymer industry.

Cellulose Nanocrystals (CNCs) and Cellulose Nanofibers (CNFs) as Adsorbents of Heavy Metal Ions

The isolation of nanocellulose has been extensively investigated due to the growing demand for sustainable green materials. Cellulose nanocrystals (CNCs) and cellulose nanofibers (CNFs), which have the same chemical composition but have different morphology, particle size, crystallinity, and other properties depending on the precursor and the synthesis method used. In comparison, CNC particles have a short rod-like shape and have smaller particle dimensions when compared to CNF particles in the form of fibers. CNC synthesis was carried out chemically (hydrolysis method), and CNF synthesis was carried out mechanically (homogenization, ball milling, and grinding), and both can be modified because they have a large surface area and are rich in hydroxyl groups. Modifications were made to increase the adsorption ability of heavy metal ions. The Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermogravimetric (TG), and dynamic light scattering (DLS) can reveal the characteristics and morphology of CNCs and CNFs. The success and effectiveness of the heavy metal adsorption process are influenced by a few factors. These factors include adsorbent chemical structure changes, adsorbent surface area, the availability of active sites on the adsorbent’s surface, adsorption constants, heavy metal ionic size differences, pH, temperature, adsorbent dosage, and contact time during the adsorption process. In this review, we will discuss the characteristics of CNCs and CNFs synthesized from various precursors and methods, the modification methods, and the application of CNCs and CNFs as heavy metal ion adsorbents, which includes suitable isotherm and kinetics models and the effect of pH on the selectivity of various types of heavy metal ions.

Processing, Characterization and Disintegration Properties of Biopolymers Based on Mater-Bi® and Ellagic Acid/Chitosan Coating

Among the most promising synthetic biopolymers to replace conventional plastics in numerous applications is MaterBi^® (MB), a commercial biodegradable polymer based on modified starch and synthetic polymers. Actually, MB has important commercial applications as it shows interesting mechanical properties, thermal stability, processability and biodegradability. On the other hand, research has also focused on the incorporation of natural, efficient and low-cost active compounds into various materials with the aim of incorporating antimicrobial and/or antioxidant capacities into matrix polymers to extend the shelf life of foods. Among these is ellagic acid (EA), a polyphenolic compound abundant in some fruits, nuts and seeds, but also in agroforestry and industrial residues, which seems to be a promising biomolecule with interesting biological activities, including antioxidant activity, antibacterial activity and UV-barrier properties. The objective of this research is to develop a film based on commercial biopolymer Mater-Bi^® (MB) EF51L, incorporating active coating from chitosan with a natural active compound (EA) at two concentrations (2.5 and 5 wt.%). The formulations obtained complete characterization and were carried out in order to evaluate whether the incorporation of the coating significantly affects thermal, mechanical, structural, water-vapor barrier and disintegration properties. From the results, FTIR analysis yielded identification, through characteristic peaks, that the type of MB used is constituted by three polymers, namely PLA, TPS and PBAT. With respect to the mechanical properties, the values of tensile modulus and tensile strength of the MB-CHI film were between 15 and 23% lower than the values obtained for the MB film. The addition of 2.5 wt.% EA to the CHI layer did not generate changes in the mechanical properties of the system, whereas a 5 wt.% increase in ellagic acid improved the mechanical properties of the CHI film through the addition of natural phenolic compounds at high concentrations. Finally, the disintegration process was mainly affected by the PBAT biopolymer, causing the material to not disintegrate within the times indicated by ISO 20200.

Utilization of different wood-based microfibril cellulose for the preparation of reinforced hydrophobic polymer composite films via Pickering emulsion: A comparative study

Pickering emulsion is a promising strategy for the preparation of hydrophobic polymer composite using hydrophilic nanocellulose. Herein, two types of microfibril cellulose, pure mechanical pretreated microfibril cellulose (P-MFC) and Deep eutectic solvents pretreated microfibril cellulose (DES-MFC), were used to fabricate reinforced hydrophobic polystyrene (PS) composites (MFC/PS) with the aid of Pickering emulsion. The results showed that both oil/water ratio and the content as well as surface hydrophilicity of MFC were playing an important role in emulsifying capacity. 8 % MFC/PS emulsion showed the smallest and most uniform emulsion droplets which is similar to nanofibril cellulose (NFC)/PS at the oil/water ratio of 3:1. The mechanical performance of MFC/PS composites verified that the reinforcement effect was closely related to the emulsifying capacity of MFC. Specially, when the content of P-MFC was 8 wt%, the composite exhibited the best mechanical properties with the tensile strength of 44.7 ± 4.4 MPa and toughness of 1162 ± 52.8 kJ/m³ and Young's modulus of 13.5 ± 0.8 GPa, which was comparable to NFC/PS composite. Moreover, the effective enhancement role of P-MFC in hydrophobic polymethyl methacrylate and polycarbonate composites were also realized via Pickering emulsion strategy. Overall, this work constituted a proof of concept of the potential application of P-MFC in nano-reinforced hydrophobic composite.

Fabrication and evaluation of dodecyl imide maleopimaric acid glycidyl methacrylate ester modified silica with multiple retention mechanisms for reversed phase liquid chromatography

As green, less toxic, and abundant ligands with rich functional groups, natural products are widely used in synthesis of chromatographic stationary phases. In this work, dodecyl imide maleopimaric acid glycidyl methacrylate ester (C12-MPAGN) was prepared from maleopimaric acid through the imidization and ring-opening based esterification reaction. By using "thiol-ene" click chemistry, it was chemically bonded to the silica and (3-mercaptopropyl) trimethoxysilane (γ-MPS) was used as the coupling agent to obtain dodecyl imide maleopimaric acid glycidyl methacrylate ester bonded silica stationary phase (Sil-C12-MPAGN). Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), scanning electron microscopies (SEM), and elemental analysis (EA) were utilized to verify that the Sil-C12-MPAGN stationary phase was successfully prepared with C12-MPAGN immobilized on the silica surface. In order to evaluate the chromatographic performance and retention mechanisms of the Sil-C12-MPAGN column and compared with C18 column, a variety of compounds were used, including stander mixture of Tanaka, alkylbenzenes, polycyclic aromatic hydrocarbons (PAHs), phenols and flavonoids. Based on these multiple interactions, including hydrophobic, hydrogen-bonding, and π-π interactions, high selectivity and superior separation performance were demonstrated by the Sil-C12-MPAGN column for probe molecules what had previously been mentioned. In addition, the quantitative determination of paclitaxel content in Yew bark extract was conducted with this column, which was found that the concentration was 83.67 mg/L, respectively. In short, the present study proposes a new strategy for introducing rosin to liquid chromatography with high selectivity and separation performance.

Characteristics and Functional Application of Cellulose Fibers Extracted from Cow Dung Wastes

The widespread use of petroleum-based products has led to increasing environmental and ecological problems, while the extraction and application of various natural cellulose fibers have received increasing attention. This research focuses on the extraction of cellulose fibers from cow dung using different treatments: hot water, hydrogen peroxide (H₂O₂), sodium hydroxide (NaOH) and potassium hydroxide (KOH) boilings, as well as a selection of the best quality cow dung fibers for papermaking with quality control. The study's objective is to find a sustainable method to extract as much material as possible from renewable biomass feedstock. The results show that the best extraction rate is obtained by KOH boiling with 42% cellulose fibers extracted. Corresponding handmade paper has a burst index of 2.48 KPam²/g, a tear index of 4.83 mNm²/g and a tensile index of 26.72 Nm/g. This project expands the sources of natural cellulose fibers to an eco-friendly and sustainable one and opens up new applications for cow dung.

Active Food Packaging Made of Biopolymer-Based Composites

Food packaging plays a vital role in protecting food products from environmental damage and preventing contamination from microorganisms. Conventional food packaging made of plastics produced from unrenewable fossil resources is hard to degrade and poses a negative impact on environmental sustainability. Natural biopolymers are attracting interest for reducing environmental problems to achieve a sustainable society, because of their abundance, biocompatibility, biodegradability, chemical stability, and non-toxicity. Active packaging systems composed of these biopolymers and biopolymer-based composites go beyond simply acting as a barrier to maintain food quality. This review provides a comprehensive overview of natural biopolymer materials used as matrices for food packaging. The antioxidant, water barrier, and oxygen barrier properties of these composites are compared and discussed. Furthermore, biopolymer-based composites integrated with antimicrobial agents-such as inorganic nanostructures and natural products-are reviewed, and the related mechanisms are discussed in terms of antimicrobial function. In summary, composites used for active food packaging systems can inhibit microbial growth and maintain food quality.

Toward the Scalable Fabrication of Fully Bio-Based Antimicrobial and UVB-Blocking Transparent Polylactic Acid Films That Incorporate Natural Coatings and Nanopatterns

Microbial transmissions via membrane surface and single-use plastic-induced pollution are two urgent societal problems. This research introduces a scalable fabrication strategy for fully biobased antibacterial and ultraviolet-B block polylactic acid (PLA) films integrating natural coatings and nanopatterns via ultrasonic atomization spray coating and thermal nanoimprinting lithography (TNIL) techniques, respectively. Tannic acid (TA) and gallic acid (GA) were formulated prior to TNIL using anode aluminum oxide template. Results reveal that TA and GA inks display intense adsorption in the UVB region. Plasma increases the hydrophilicity of PLA films for fast spreading of ink droplets. Micron-sized pillars observed on film confirm the successful structural replication. TA-coated PLA films display higher transparency than GA-coated ones. Nanopatterned PLA films have a modest antibacterial resistance of c. 45% against Escherichia coli. TA/GA coatings, however, impart PLA films with a bacterial reduction rate of over 80%. The integration of a TA or GA coating with nanopatterns further promotes the antibacterial rate up to 98%. The cytocompatibility of TA and GA demonstrates that the engineered film can potentially be applied as food packaging. Finally, a continuous mass production strategy is proposed along with an outline of the associated challenges and costs. This study provides a scalable strategy to the sustainable development of eco-benign and functional films.

A comprehensive review on fused deposition modelling of polylactic acid

Fused Deposition Modelling (FDM) is one of the additive manufacturing (AM) techniques that have emerged as the most feasible and prevalent approach for generating functional parts due to its ability to produce neat and intricate parts. FDM mainly utilises one of the widely used polymers, polylactic acid, also known as polylactide (PLA). It is an aliphatic polyester material and biocompatible thermoplastic, with the best design prospects due to its eco-friendly properties; when PLA degrades, it breaks down into water and carbon dioxide, neither of which are hazardous to the environment. However, PLA has its limitations of poor mechanical properties. Therefore, a filler reinforcement may enhance the characteristics of PLA and produce higher-quality FDM-printed parts. The processing parameters also play a significant role in the final result of the printed parts. This review aims to study and discover the properties of PLA and the optimum processing parameters. This review covers PLA in FDM, encompassing its mechanical properties, processing parameters, characterisation, and applications. A comprehensive description of FDM processing parameters is outlined as it plays a vital role in determining the quality of a printed product. In addition, PLA polymer is highly desirable for various field industrial applications such as in a medical, automobile, and electronic, given its excellent thermoplastic and biodegradability properties.

Fabrication of Chitosan/Hydroxyethyl Cellulose/TiO2 Incorporated Mulberry Anthocyanin 3D-Printed Bilayer Films for Quality of Litchis

In this study, a bilayer antibacterial chromogenic material was prepared using chitosan (CS) and hydroxyethyl cellulose (HEC) as inner substrate, mulberry anthocyanins (MA) as a natural tracer, and titanium dioxide nanoparticles (nano-TiO₂)/CS:HEC as a bacteriostatic agent for the outer layer. By investigating their apparent viscosity and suitability for 3D printing links, the optimal ratio of the substrates was determined to be CS:HEC = 3:3. Viscosity of the CH was moderate. The printing process was consistent and exhibited no breakage or clogging. The printed image was highly stable and not susceptible to collapse and diffusion. Scanning electron microscopy and infrared spectroscopy indicated that intermolecular binding between the substances exhibited good compatibility. Titanium dioxide nanoparticles (nano-TiO₂) were evenly distributed in the CH and no agglomeration was observed. The inner film fill rates affected the overall performance of the chromogenic material, with strong inhibitory effects against Escherichia coli and Staphylococcus aureus at different temperatures, as well as strong color stability. The experimental results indicated that the double-layer antibacterial chromogenic material can, to a certain extent, extend the shelf life of litchi fruit and determine the extent of its freshness. Therefore, from this study, we can infer that the research and development of active materials have a certain reference value.

Recent advances in polysaccharide-based edible coatings for preservation of fruits and vegetables: A review

Harvested fruits and vegetables are prone to decay and quality deterioration during storage. Although traditional packaging and chemical treatments are effective, they are harmful to the environment and human health. Hence, higher requirements for food preservation technology are increasingly proposed. Nontoxic, renewable, degradable, and edible packaging for fruits and vegetables has become a research hotspot in recent years. Chitosan, alginate, cellulose, pectin, starch, and other polysaccharides as coating materials have been widely used. Compared with traditional plastic packaging and chemical treatment, these coatings exhibited a better preservation effect and higher safety. In this paper, the preservation mechanism of fruits and vegetables by edible coatings treatment was described, and the research on edible coatings used in fruits and vegetables was summarized. The effects polysaccharide-based edible coatings on physicochemical quality and antimicrobial effect of fruits and vegetables were reviewed.

Emerging Food Packaging Applications of Cellulose Nanocomposites: A Review

Cellulose is the most abundant biopolymer on Earth, which is synthesized by plants, bacteria, and animals, with source-dependent properties. Cellulose containing β-1,4-linked D-glucoses further assembles into hierarchical structures in microfibrils, which can be processed to nanocellulose with length or width in the nanoscale after a variety of pretreatments including enzymatic hydrolysis, TEMPO-oxidation, and carboxymethylation. Nanocellulose can be mainly categorized into cellulose nanocrystal (CNC) produced by acid hydrolysis, cellulose nanofibrils (CNF) prepared by refining, homogenization, microfluidization, sonification, ball milling, and the aqueous counter collision (ACC) method, and bacterial cellulose (BC) biosynthesized by the Acetobacter species. Due to nontoxicity, good biodegradability and biocompatibility, high aspect ratio, low thermal expansion coefficient, excellent mechanical strength, and unique optical properties, nanocellulose is utilized to develop various cellulose nanocomposites through solution casting, Layer-by-Layer (LBL) assembly, extrusion, coating, gel-forming, spray drying, electrostatic spinning, adsorption, nanoemulsion, and other techniques, and has been widely used as food packaging material with excellent barrier and mechanical properties, antibacterial activity, and stimuli-responsive performance to improve the food quality and shelf life. Under the driving force of the increasing green food packaging market, nanocellulose production has gradually developed from lab-scale to pilot- or even industrial-scale, mainly in Europe, Africa, and Asia, though developing cost-effective preparation techniques and precisely tuning the physicochemical properties are key to the commercialization. We expect this review to summarise the recent literature in the nanocellulose-based food packaging field and provide the readers with the state-of-the-art of this research area.

Recent Advances in PLA-Based Antibacterial Food Packaging and Its Applications

In order to reduce environmental pollution and resource waste, food packaging materials should not only have good biodegradable ability but also effective antibacterial properties. Poly(lactic acid) (PLA) is the most commonly used biopolymer for food packaging applications. PLA has good physical properties, mechanical properties, biodegradability, and cell compatibility but does not have inherent antibacterial properties. Therefore, antibacterial packaging materials based on PLA need to add antibacterial agents to the polymer matrix. Natural antibacterial agents are widely used in food packaging materials due to their low toxicity. The high volatility of natural antibacterial agents restricts their application in food packaging materials. Therefore, appropriate processing methods are particularly important. This review introduces PLA-based natural antibacterial food packaging, and the composition and application of natural antibacterial agents are discussed. The properties of natural antibacterial agents, the technology of binding with the matrix, and the effect of inhibiting various bacteria are summarized.

Source of Nanocellulose and Its Application in Nanocomposite Packaging Material: A Review

Food packaging nowadays is not only essential to preserve food from being contaminated and damaged, but also to comply with science develop and technology advances. New functional packaging materials with degradable features will become a hot spot in the future. By far, plastic is the most common packaging material, but plastic waste has caused immeasurable damage to the environment. Cellulose known as a kind of material with large output, wide range sources, and biodegradable features has gotten more and more attention. Cellulose-based materials possess better degradability compared with traditional packaging materials. With such advantages above, cellulose was gradually introduced into packaging field. It is vital to make packaging materials achieve protection, storage, transportation, market, and other functions in the circulation process. In addition, it satisfied the practical value such as convenient sale and environmental protection, reduced cost and maximized sales profit. This review introduces the cellulose resource and its application in composite packaging materials, antibacterial active packaging materials, and intelligent packaging materials. Subsequently, sustainable packaging and its improvement for packaging applications were introduced. Finally, the future challenges and possible solution were provided for future development of cellulose-based composite packaging materials.

Functionalized cellulose nanocrystal embedded into citrus pectin coating improves its barrier, antioxidant properties and potential application in food

Due to the hydrophilic of the pectin material, the coating has poor barrier properties and a negative preservation effect on fresh fruits. In this study, citrus pectin coating with improved barrier and antioxidant properties was prepared by embedding with functional cellulose nanocrystals (CNC). It was assessed that cellulose nanocrystals grafted with p-coumaric acid (CNC-P) were uniformly dispersed in the pectin matrix to improve coating barrier properties. The addition of 8 % CNC-P to the pectin coating led to a decrease in water vapor and oxygen permeability from the coating by 12.6 % and 22.3 %, respectively. Additionally, the grafted p-coumaric acid (PA) introduced antioxidant properties to the cellulose nanocrystals. The fresh-cut fruits preservation assay showed that the coating containing CNC-P exerted a stronger inhibition effect of the browning process within 8 h than other coatings. This study suggests that pectin coating embedded with CNC-P has the potential to be used in food packaging.

Imatinib Mesylate-Loaded Rosin/Cinnamon Oil-Based In Situ Forming Gel against Colorectal Cancer Cells

Localized delivery systems have been typically designed to enhance drug concentration at a target site and minimize systemic drug toxicity. A rosin/cinnamon oil (CO) in situ forming gel (ISG) was developed for the sustainable delivery of imatinib mesylate (IM) against colorectal cancer cells. CO has been claimed to express a potent anticancer effect against various cancer cells, as well as a synergistic effect with IM on colorectal cancer cells; however, poor aqueous solubility limits its application. The effect of rosin with the adding CO was assessed on physicochemical properties and in vitro drug release from developed IM-loaded rosin/CO-based ISG. Moreover, in vitro cytotoxicity tests were conducted against two colorectal cancer cells. All formulations exhibited Newtonian flow behavior with viscosity less than 266.9 cP with easier injectability. The adding of CO decreased the hardness and increased the adhesive force of the obtained rosin gel. The gel formation increased over time under microscopic observation. CO-added ISG had a particle-like gel appearance, and it promoted a higher release of IM over a period of 28 days. All tested ISG formulations revealed cytotoxicity against HCT-116 and HT-29 cell lines at different incubation times. Thus, CO-loaded rosin-based ISG can act as a potentially sustainable IM delivery system for chemotherapy against colorectal cancer cells.

Poly (lactic acid)-based pH responsive membrane combined with chitosan and alizarin for food packaging

A poly (lactic acid) (PLA) -based functional partition composite membrane (PLA/CA) containing chitosan (CS) and alizarin (AL) was designed by solution casting method. The PLA/CA membrane contains the antibacterial zone of the edge part (PLA/CS) and the pH response detection zone of the central part (PLA/AL). At the same time, the environmentally friendly plasticizer tributyl citrate (TBC) was added to make the prepared PLA/CA composite membrane have good flexibility and high transparency. The results of FE-SEM and FTIR showed that CS and AL were uniformly dispersed in PLA matrix and had good compatibility with PLA. The antioxidant activities of PLA/CS and PLA/AL composite films were 43.3 % and 72.8 %, respectively. At the same time, the inhibitory rates of PLA/CS membrane against Escherichia coli and Staphylococcus aureus were as high as 87.91 % and 75.17 %, respectively. PLA/AL films exhibit excellent UV barrier properties. When the environmental pH (ammonia and acetic acid vapor) changed repeatedly, the PLA/AL membrane showed reversible color change of yellow under acidic condition and purple under alkaline condition. During the packaging and storage of chicken breast meat, the freshness of chicken breast meat can be detected by the color change of functional PLA/CA composite membrane.

Modification of Cellulose Micro- and Nanomaterials to Improve Properties of Aliphatic Polyesters/Cellulose Composites: A Review

Aliphatic polyesters/cellulose composites have attracted a lot attention due to the perspectives of their application in biomedicine and the production of disposable materials, food packaging, etc. Both aliphatic polyesters and cellulose are biocompatible and biodegradable polymers, which makes them highly promising for the production of “green” composite materials. However, the main challenge in obtaining composites with favorable properties is the poor compatibility of these polymers. Unlike cellulose, which is very hydrophilic, aliphatic polyesters exhibit strong hydrophobic properties. In recent times, the modification of cellulose micro- and nanomaterials is widely considered as a tool to enhance interfacial biocompatibility with aliphatic polyesters and, consequently, improve the properties of composites. This review summarizes the main types and properties of cellulose micro- and nanomaterials as well as aliphatic polyesters used to produce composites with cellulose. In addition, the methods for noncovalent and covalent modification of cellulose materials with small molecules, polymers and nanoparticles have been comprehensively overviewed and discussed. Composite fabrication techniques, as well as the effect of cellulose modification on the mechanical and thermal properties, rate of degradation, and biological compatibility have been also analyzed.