Mechanically viscoelastic nanoreinforced hybrid hydrogels composed of polyacrylamide, sodium carboxymethylcellulose, graphene oxide, and cellulose nanocrystals

Fabricating oxygen self-supplying 3D printed bioactive hydrogel scaffold for augmented vascularized bone regeneration

Limited cells and factors, inadequate mechanical properties, and necrosis of defects center have hindered the wide clinical application of bone-tissue engineering scaffolds. Herein, we construct a self-oxygenated 3D printed bioactive hydrogel scaffold by integrating oxygen-generating nanoparticles and hybrid double network hydrogel structure. The hydrogel scaffold possesses the characteristics of extracellular matrix; Meanwhile, the fabricated hybrid double network structure by polyacrylamide and CaCl2-crosslinked sodium carboxymethylcellulose endows the hydrogel favorable compressive strength and 3D printability. Furthermore, the O2 generated by CaO2 nanoparticles encapsulated in ZIF-8 releases steadily and sustainably because of the well-developed microporous structure of ZIF-8, which can significantly promote cell viability and proliferation in vitro, as well as angiogenesis and osteogenic differentiation with the assistance of Zn2+. More significantly, the synergy of O2 and 3D printed pore structure can prevent necrosis of defects center and facilitate cell infiltration by providing cells the nutrients and space they need, which can further induce vascular network ingrowth and accelerate bone regeneration in all areas of the defect in vivo. Overall, this work provides a new avenue for preparing cell/factor-free bone-tissue engineered scaffolds that possess great potential for tissue regeneration and clinical alternative.

Dual function of carboxymethyl cellulose scaffold: A one-stone-two-birds strategy to prepare double-layer hollow ZIF-67 derivates for flame retardant epoxy composites

Aluminum hypophosphite (AHP) has been used as a flame retardant for a long time. Previous studies about AHP employed in flame retardant materials mostly focus on coating, modification, and complex system. It is valuable to explore simple experimental steps to prepare nano hybrids with AHP and metal-organic frameworks (MOFs). We found acidic substances could etch zeolitic imidazolate framework-67 (ZIF-67) to obtain MOF derivatives. Unfortunately, AHP and ZIF-67 could not directly form a hybrid. Therefore, carboxymethylcellulose (CMC) is introduced as a dual function layer (buffer and support). The CMC resists the complete conversion of ZIF-67 etched by phosphoric acid to amorphous cobalt phosphate hydrate (ACP). Meanwhile, CMC containing hydroxyl groups combines with AHP through electrostatic interaction and coordination bonds. A double-layer hollow MOF derivative is synthesized through this one-stone-two-birds strategy. Due to multiple flame retardant elements and unique nanostructure, this MOF derivative endows epoxy (EP) resin with excellent flame retardancy. With 2.0 wt% addition, the peak heat release rate (pHRR) and total heat release (THR) of EP/AHP/ACP@CMC are decreased by 47.8 and 21.0 %, respectively. This study proposes a novel scheme that converts AHP into MOF derivatives as high-performance FRs.

Synthetic and biopolymers-based antimicrobial hybrid hydrogels: a focused review

The constantly accelerating occurrence of microbial infections and their antibiotic resistance has spurred advancement in the field of material sciences and has guided the development of novel materials with anti-bacterial properties. To address the clinical exigencies, the material of choice should be biodegradable, biocompatible, and able to offer prolonged antibacterial effects. As an attractive option, hydrogels have been explored globally as a potent biomaterial platform that can furnish essential antibacterial attributes owing to its three-dimensional (3D) hydrophilic polymeric network, adequate biocompatibility, and cellular adhesion. The current review focuses on the utilization of different antimicrobial hydrogels based on their sources (natural and synthetic). Further, the review also highlights the strategies for the generation of hydrogels with their advantages and disadvantages and their applications in different biomedical fields. Finally, the prospects in the development of hydrogels-based antimicrobial biomaterials are discussed along with some key challenges encountered during their development and clinical translation.

Sodium carboxymethyl cellulose and MXene reinforced multifunctional conductive hydrogels for multimodal sensors and flexible supercapacitors

With the growing demand for eco-friendly materials in wearable smart electronic devices, renewable, biocompatible, and low-cost hydrogels based on natural polymers have attracted much attention. Cellulose, as one of the renewable and degradable natural polymers, shows great potential in wearable smart electronic devices. Multifunctional conductive cellulose-based hydrogels are designed for flexible electronic devices by adding sodium carboxymethyl cellulose and MXene into polyacrylic acid networks. The multifunctional hydrogels possess excellent mechanical property (stress: 310 kPa; strain: 1127 %), toughness (206.67 KJ m-3), conductivity (1.09 ± 0.12 S m-1) and adhesion (82.19 ± 3.65 kPa). The multifunctional conductive hydrogels serve as strain sensors (Gauge Factor (GF) = 5.79, 0-700 % strain; GF = 14.0, 700-900 % strain; GF = 40.36, 900-1000 % strain; response time: 300 ms; recovery time: 200 ms) and temperature sensors (Temperature coefficient of resistance (TCR) = 2.5755 °C-1 at 35 °C- 60 °C). The sensor detects human activities with clear and steady signals. A distributed array of flexible sensors is created to measure the magnitude and distribution of pressure and a hydrogel-based flexible touch keyboard is also fabricated to recognize writing trajectories, pressures and speeds. Furthermore, a flexible hydrogel-based supercapacitor powers the LED and exhibits good cyclic stability over 15,000 charge-discharge cycles.

Carboxymethylcellulose hydrogels with stable carbon quantum dots: Enabling dynamic fluorescence modulation, automatic erasure, and secure information encryption

Inspired by "disappear after reading", a time-modulated encryption hydrogel was synthesized by carboxymethyl cellulose with carbon quantum dots. Carboxymethyl cellulose in this system stabilized carbon quantum dots, which ensured the whole hydrogel worked well. The encryption/decryption of information depended on pH adjustment, application of EDTA and Cr (VI). Furthermore, an in-depth analysis of the fluorescence change mechanism uncovered that fluorescence quenching was potentially influenced by internal filtering effects and static quenching, which involved the amino, carboxyl, and hydroxyl groups present within the hydrogel.

Bone-like apatite formation in biocompatible phosphate-crosslinked bacterial cellulose-based hydrogels for bone tissue engineering applications

Addressing major bone injuries is a challenge in bone regeneration, necessitating innovative 3D hydrogel-based therapeutic approaches to enhance scaffold properties for better bioactivity. Bacterial cellulose (BC) is an excellent scaffold for bone tissue engineering due to its biocompatibility, high porosity, substantial surface area, and remarkable mechanical strength. However, its practical application is limited due to a lack of inherent osteogenic activity and biomineralization ability. In this study, we synthesized bone-like apatite in biocompatible BC hydrogel by introducing phosphate groups. Hydrogels were prepared using fibrous BC, acrylamide (AM), and bis [2-methacryloyloxy] ethyl phosphate (BMEP) as a crosslinker through free radical polymerization (P-BC-PAM). P-BC-PAM hydrogels exhibited outstanding compressive mechanical properties, highly interconnected porous structures, good swelling, and biodegradable properties. BMEP content significantly influenced the physicochemical and biological properties of the hydrogels. Increasing BMEP content enhanced the fibrous structure, porosity from 85.1 % to 89.5 %, and compressive mechanical strength. The optimized hydrogel (2.0P-BC-PAM) displayed maximum compressive stress, toughness, and elastic modulus at 75 % strain: 221 ± 0.08 kPa, 24,674.2 ± 978 kPa, and 11 ± 0.47 kPa, respectively. P-BC-PAM hydrogels underwent biomineralization in simulated body fluid (SBF) for 14 days, forming bone-like apatite with a Ca/P ratio of 1.75, similar to hydroxyapatite. Confirmed by Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and field-emission scanning electron microscopy (FE-SEM), this suggests their potential as scaffolds for bone tissue engineering. MC3T3-E1 osteoblast cells effectively attached and proliferated on P-BC-PAM. In summary, this study contributes insights into developing phosphate-functionalized BC-based hydrogels with potential applications in bone tissue engineering.

A zinc-ion battery-type self-powered strain sensing system by using a high-performance ionic hydrogel

Flexible strain sensors based on conductive hydrogels have profound implications for wearable electronics and health-monitoring systems. However, such sensors still need to integrate with energy providing devices to drive their functions. Herein, we develop a soaking-free polyacrylamide/carboxymethyl cellulose/tannic acid (PAAM/CMC/TA) hydrogel containing 2 M ZnSO4 + 0.1 M MnSO4 electrolyte for a novel zinc-ion battery-type self-powered strain sensing system. The synthesized hydrogel possesses desirable stretchability (tensile strain/stress of 622%/132 kPa), self-healing and self-adhesive properties, as well as good ionic conductivity (0.76 ± 0.04 S m-1). A mechanically durable Zn-MnO2 battery is developed using the PAAM/CMC/TA hydrogel and it can deliver a high specific capacity (223.0 mA h g-1) and maintain stable energy outputs under severe mechanical deformations. The electrochemical behavior of the battery can recover even after several self-healing cycles. Due to the excellent strain and pressure sensing properties of the PAAM/CMC/TA hydrogel, the battery combined with a fixed resistor served as a self-powered wearable sensing device, which could translate different human movements into distinguishable electrical signals without an external power supply. Our work provides guidance for the development of next-generation self-powered sensors.

Growth of spiral ganglion neurons induced by graphene oxide/oxidized bacterial cellulose composite hydrogel

The damage or degeneration of spiral ganglion neurons (SGNs) can impair the auditory signals transduction from hair cells to the central auditory system, and cause significant hearing loss. Herein, a new form of bioactive hydrogel incorporating topological graphene oxide (GO) and TEMPO-oxidized bacterial cellulose (GO/TOBC hydrogel) was developed to provide a favorable microenvironment for SGN neurite outgrowth. As the network structure of lamellar interspersed fiber cross-linked by GO/TOBC hydrogels well simulated the structure and morphology of ECM, with the controllable hydrophilic property and appropriate Young's modulus well met those requirements of SGNs microenvironment, the GO/TOBC hybrid matrix exhibited great potential to promote the growth of SGNs. The quantitative real-time PCR result confirmed that the GO/TOBC hydrogel can significantly accelerate the development of growth cones and filopodia, by increasing the mRNA expression levels of diap3, fscn2, and integrin β1. These results suggest that GO/TOBC hydrogel scaffolds have the potential to be used to construct biomimetic nerve grafts for repairing or replacing nerve defects.

High-stretchable, self-healing, self-adhesive, self-extinguishing, low-temperature tolerant starch-based gel and its application in stimuli-responsiveness

Starch with active hydroxyl groups is one of the most attractive carbohydrates for the preparation of gels in recent years. However, the mechanical properties, self-healing properties, self-adhesion properties, especially low-temperature resistance are generally unsatisfactory for current starch-based gels. Based on that, a multiple network structure of amylopectin-carboxymethyl cellulose-polyacrylamide (ACP) gel was prepared by a "cooking" method. Tannic acid (TA) was used to construct multiple hydrogen bonds among molecular chains. ACP gel demonstrates high elongation at break (1090 %) and strength, self-healing performance and adhesion behavior, extraordinary low-temperature resistance (-80 °C) and self-extinguishing. As a sensor device, ACP gel can effectively monitor human movements and microscopic expression changes and achieve real-time monitoring under harsh conditions (After multiple cutting-healing steps, under low-temperature conditions, even a month later). Additionally, ACP gel could be served to detect temperature changes with a wide operating range and a high sensitivity of 33 %·°C^-1, which is promising to monitor the changes in temperature. More interestingly, ACP gel can even monitor the cooking process and breathing frequency with fast response, implying applications in food processing, disease diagnosis and medical treatment. This study provides new opportunities for the design and fabrication of carbohydrate-based gels with multiple performance and multifunctional electronic devices.

3D printing of cellulose nanocrystals based composites to build robust biomimetic scaffolds for bone tissue engineering

Cellulose nanocrystals (CNC) are drawing increasing attention in the fields of biomedicine and healthcare owing to their durability, biocompatibility, biodegradability and excellent mechanical properties. Herein, we fabricated using fused deposition modelling technology 3D composite scaffolds from polylactic acid (PLA) and CNC extracted from Ficus thonningii. Scanning electron microscopy revealed that the printed scaffolds exhibit interconnected pores with an estimated average pore size of approximately 400 µm. Incorporating 3% (w/w) of CNC into the composite improved PLA mechanical properties (Young's modulus increased by ~ 30%) and wettability (water contact angle decreased by ~ 17%). The mineralization process of printed scaffolds using simulated body fluid was validated and nucleation of hydroxyapatite confirmed. Additionally, cytocompatibility tests revealed that PLA and CNC-based PLA scaffolds are non-toxic and compatible with bone cells. Our design, based on rapid 3D printing of PLA/CNC composites, combines the ability to control the architecture and provide improved mechanical and biological properties of the scaffolds, which opens perspectives for applications in bone tissue engineering and in regenerative medicine.

Nanomaterials-Incorporated Chemically Modified Gelatin Methacryloyl-Based Biomedical Composites: A Novel Approach for Bone Tissue Engineering

Gelatin methacryloyl (GelMA)-based composites are evolving three-dimensional (3D) networking hydrophilic protein composite scaffolds with high water content. These protein composites have been devoted to biomedical applications due to their unique abilities, such as flexibility, soft structure, versatility, stimuli-responsiveness, biocompatibility, biodegradability, and others. They resemble the native extracellular matrix (ECM) thanks to their remarkable cell-adhesion and matrix-metalloproteinase (MMP)-responsive amino acid motifs. These favorable properties promote cells to proliferate and inflate within GelMA-protein scaffolds. The performance of GelMA composites has been enriched using cell-amenable components, including peptides and proteins with a high affinity to harmonize cellular activities and tissue morphologies. Due to their inimitable merits, GelMA systems have been used in various fields such as drug delivery, biosensor, the food industry, biomedical, and other health sectors. The current knowledge and the role of GelMA scaffolds in bone tissue engineering are limited. The rational design and development of novel nanomaterials-incorporated GelMA-based composites with unique physicochemical and biological advantages would be used to regulate cellular functionality and bone regeneration. Substantial challenges remain. This review focuses on recent progress in mitigating those disputes. The study opens with a brief introduction to bone tissue engineering and GelMA-based composites, followed by their potential applications in bone tissue engineering. The future perspectives and current challenges of GelMA composites are demonstrated. This review would guide the researchers to design and fabricate more efficient multifunctional GelMA-based composites with improved characteristics for their practical applications in bone tissue engineering and biomedical segments.

Enzyme-Triggered Crosslinked Hybrid Hydrogels for Bone Tissue Engineering

The quest to develop state-of-the-art hydrogels for bone tissue engineering has accompanied substantial innovation and significant progression in the field of bioactive hydrogels. Still, there is scope for advancement in this cell-friendly and biocompatible scaffold system. The crosslinking approaches used for hydrogel synthesis plays a decisive role in guiding and regulating the mechanical stability, network framework, macroscopic architect, immunological behaviors, and cellular responses. Until recently, enzyme-based crosslinking strategies were considered as the pinnacle in designing efficient hybrid hydrogel systems. A variety of enzymes have been explored for manufacturing hydrogels while taking the advantage of the biocompatible nature, specificity, ability to produce nontoxic by products and high efficiency of enzymes. The current review focuses on the utility of different enzymes as crosslinking agents for hydrogel formation with their application in bone tissue engineering. The field of enzyme crosslinked hydrogel synthesis is rapidly maturing with a lot of opportunities to be explored in bone tissue engineering. Enzyme-based in situ and externally crosslinked hydrogels for bone regeneration is an attractive field, and with innovation in using engineered enzymes this field will continue to flourish with clinical orientation.

Manufacturing functional hydrogels for inducing angiogenic-osteogenic coupled progressions in hard tissue repairs: prospects and challenges

In large bone defects, inadequate vascularization within the engineered constructs has been a major challenge in developing clinically impactful products. It is fairly determined that bone tissues and blood vessels are established concurrently throughout tissue repairs after an injury. Thus, the coupling of angiogenesis-osteogenesis is an essential course of action in bone tissue restoration. The manufacture of biomaterial-based scaffolds plays a decisive role in stimulating angiogenic and osteogenic progressions (instruction of neovascularization and bone mineralization). Bone hydrogels with optimal conditions are more efficient at healing bone defects. There has been a remarkable advancement in producing bone substitutes in the tissue engineering area, but the sufficient and timely vascularization of engineered constructs for optimal tissue integration and regeneration is lacking due to mismatch in the scaffold characteristics and new bone tissue reconstruction. Therefore, various key challenges remain to be overcome. A deep understanding of angiogenesis and osteogenesis progressions is required to manufacture bone hydrogels with satisfactory results. The current review briefly discusses the fundamentals of bone tissues, the significance of angiogenesis-osteogenesis progressions and their inducers, the efficacy of biomaterials and composite hydrogel-promoted neo-vasculogenesis (i.e. angiogenesis) and bone mineralization (i.e. osteogenesis), and related challenges, including future research directions.

Hybrid Graphenene Oxide/Cellulose Nanofillers to Enhance Mechanical and Barrier Properties of Chitosan-Based Composites

Chitosan-based hybrid nanocomposites, containing cellulose nanocrystals (CNCs), graphene oxide (GO), and borate as crosslinking agents, were successfully prepared by solution-casting technique. The synergistic effect of the two fillers, and the role of the cross-linker, in enhancing the structural and functional properties of the chitosan polymer, was investigated. XPS results confirm the chemical interaction between borate ions and hydroxyl groups of chitosan, GO, and CNCs. The morphological characterization shows that the GO sheets are oriented along the casting surface, whereas the CNC particles are homogenously distributed in the sample. Results of tensile tests reveal that the presence of graphene oxide enhances the elastic modulus, tensile strength, elongation at break, and toughness of chitosan, while cellulose and borate induce an increase in the elastic modulus and stress at the yield point. In particular, the borate-crosslinked chitosan-based sample containing 0.5 wt% of GO and 0.5 wt% of CNCs shows an elongation at a break value of 30.2% and a toughness value of 988 J*m⁻³ which are improved by 124% and 216%, respectively, compared with the pristine chitosan. Moreover, the water permeability results show that the presence of graphene oxide slightly increases the water barrier properties, whereas the borate and cellulose nanocrystals significantly reduce the water vapor permeability of the polymer by about 50%. Thus, by modulating the content of the two reinforcing fillers, it is possible to obtain chitosan-based nanocomposites with enhanced mechanical and water barrier properties which can be potentially used in various applications such as food and electronic packaging.

Application of Graphene Oxide-Based Hydrogels in Bone Tissue Engineering

As an important derivative of graphene-based materials, graphene oxide (GO) not only plays an important role not only in optoelectronics and sensing but also in biology due to its unique mechanical, electronic, and optical properties. This article reviews the application of GO-based hydrogels in bone tissue engineering. Whether it is a hydrogel synthesized with natural polymer compounds, synthetic polymer chemicals, bioceramics, bioactive factors, or other materials, the addition of GO can significantly improve various properties of the hydrogel. We also introduce some high-performance GO-based hydrogels in this paper, proposing some insights into materials that may be applied to bone tissue engineering in the future.

Stretchable, freezing-tolerant conductive hydrogel for wearable electronics reinforced by cellulose nanocrystals toward multiple hydrogen bonding

Conductive hydrogels have the mechanical properties and the electronic transport properties of conductive polymers, which have been widely used in the fields of energy storage and bioelectronics. However, the rigidity and brittleness of conductive polymers hinder the long-term stability of hydrogels and limit its application in new flexible electronic devices. It is a high challenging task to prepare ion-conductive hydrogels with excellent mechanical properties, anti-freeze and electrical conductivity through a simple preparation process under the action of hydrogen bonds. We present a facile strategy to prepare mechanically tough, swelling ability hydrogels reinforced by cellulose nanocrystals (CNCs). Herein, CNCs were produced by high pressure homogeneous and pretreated with deep eutectic solvent (DES). The conductivity of the hydrogel is 0.021 S/cm at room temperature. Due to the function of DMSO/H₂O in organic solvent system, the ion-conducting hydrogel remains flexible and conductive (0.014 S/cm) at -70 °C. Hydrogel has excellent mechanical properties (stress about 1.4 MPa, strain about 1018%), excellent transparency, freezing resistance (-70 °C) and other comprehensive characteristics. The hydrogel can be assembled into a sensor for use in monitoring large and small movements of the human body, showing good responsiveness and stability.

A Review on the Design of Hydrogels With Different Stiffness and Their Effects on Tissue Repair

Tissue repair after trauma and infection has always been a difficult problem in regenerative medicine. Hydrogels have become one of the most important scaffolds for tissue engineering due to their biocompatibility, biodegradability and water solubility. Especially, the stiffness of hydrogels is a key factor, which influence the morphology of mesenchymal stem cells (MSCs) and their differentiation. The researches on this point are meaningful to the field of tissue engineering. Herein, this review focus on the design of hydrogels with different stiffness and their effects on the behavior of MSCs. In addition, the effect of hydrogel stiffness on the phenotype of macrophages is introduced, and then the relationship between the phenotype changes of macrophages on inflammatory response and tissue repair is discussed. Finally, the future application of hydrogels with a certain stiffness in regenerative medicine and tissue engineering has been prospected.

Self-healable nanocellulose composite hydrogels combining multiple dynamic bonds for drug delivery

Herein, we developed two nanocomposite polysaccharide hydrogels TPP-CNC and TPP-CNF via simple mixing method, which were constructed with multiple dynamic bonds. The microstructural features, mechanical properties, rheological properties, healable ability and biocompatibility of the complex hydrogels were evaluated. The TPP-CNC and TPP-CNF complex hydrogels exhibited higher tensile strength than pure polysaccharide hydrogel, from ~259 KPa to ~890 KPa and ~910 KPa, respectively, that was attributed to the contribution of ionic crosslinked network and hydrogen bonds. In addition, the hydrogels indicated superior fatigue resistance and high energy dissipation ratio during loading-unloading tests because of the physical sacrifice bonds, which also decreased the self-healing time at room temperature (~15 min). More importantly, the drug loaded nanocomposite hydrogels showed sustained release, reduction burst release, increased release under acidic environment, and the drug release kinetics belonged to Fickian diffusion mechanism. Therefore, the nanocellulose polysaccharide hydrogels have the highly promising to explore as biomaterials for drug delivery.

Removal of methylene blue from wastewater using ternary nanocomposite aerogel systems: Carboxymethyl cellulose grafted by polyacrylic acid and decorated with graphene oxide

In this study, environmentally-friendly nanocomposite hydrogels were fabricated. These hydrogels consisted of semi-interpenetrating networks of carboxymethyl cellulose (CMC) molecules grafted to polyacrylic acid (PAA), as an eco-friendly and non-toxic polymer with numerous carboxyl and hydroxyl functional groups, which were reinforced with different levels of graphene oxide particles (0.5, 1.5 or 3% wt). Field-emission electron scanning microscopy (FESEM) images indicated that the pore size of the nanocomposites decreased with increasing graphic oxide concentration. The presence of the graphic oxide increased the storage modulus and thermal stability of the nanocomposite hydrogels. The hydrogels had an adsorption capacity of 138 mg/g of a model cationic dye pollutant (methylene blue) after 250 min. Moreover, a reusability test showed that the adsorption capacity remained at around 90% after 9 cycles. Density functional theory (DFT) simulations suggested that the adsorption of methylene blue was mainly a result of π-π bonds, hydrogen bonds, and electrostatic interactions with graphene oxide. Our results indicated that the nanocomposite hydrogels fabricated in this study may be eco-friendly, stable, efficient, and reusable adsorbents for ionic pollutants in wastewater treatment.

Montmorillonite clay and quaternary ammonium silane-reinforced pullulan/agar-based nanocomposites and their properties for packaging applications

Synergistic combinations of pullulan, agar, montmorillonite (MMT) clay, and quaternary ammonium silane (QAS)-based (Pullulan/agar/MMT clay/QAS) active nanocomposites were prepared by a simple, cost-effective method. The Pullulan/agar/MMT clay/QAS nanocomposites were studied via Fourier-transform infrared spectroscopy, scanning electron microscopy, and X-ray diffraction analyses. The concentration of MMT clay played a very important role in the properties of the nanocomposites. However, the transparency of the composite was not significantly affected by the addition of MMT clay. The ultraviolet (UV) transmittance of Pullulan/agar/MMT clay/QAS was in the range of 91.4-79.8 at 600 nm. The thermal and mechanical properties were significantly improved by the MMT clay. The tensile strength and elongation at break of the composites were in the range of 23.8-39.7 MPa and 37.2-26.9%, respectively. The long alkyl chain in QAS significantly improved the hydrophobic nature of the Pullulan/agar/MMT clay nanocomposites, impacting the contact angle (66.2-71.2°), water vapor permeability (3.17-2.20 × 10^-9 g/m² Pa·s), and swelling ratio (1837-836%). The combination of Pullulan/agar/MMT clay/QAS had a synergistic effect on the rheological properties. MMT clay and QAS significantly increased the viscosity, storage, and loss modulus of the hydrogel composites. With the addition of QAS, the Pullulan/agar/MMT clay nanocomposites showed good antimicrobial activity against gram-positive and gram-negative pathogens.

A highly transparent tri-polymer complexin situhydrogel of HA, collagen and four-arm-PEG as potential vitreous substitute

There is a requirement of removal and replacement of vitreous for various ophthalmic diseases, e.g. retinopathy and retinal detachment. Clinical tamponades, e.g. silicone oil and fluorinated gases are used but limited due to their toxicity and some complications. A lot of polymer-based materials have been tested and proposed as vitreous substitute, but till date, there is no ideal vitreous substitute available. Thus, it requires to develop an improved vitreous substitute which will be highly suitable for vitreous replacement. We have developed tri-polymer complexin situhydrogels by crosslinking among hyaluronic acid (HA), collagen (Coll) and four-arm-polyethylene glycol (PEG). All the developed hydrogels are biocompatible with NIH 3T3 mouse fibroblast cells, having pH in the range 7-7.44 and refractive index in the range 1.333-1.345. The developed hydrogels are highly transparent, showing transmittance >97%. FTIR study shows that the hydrogel was crosslinked by amide bond formation between HA and PEG, and between Coll and PEG. The rheological study shows that all the developed hydrogels exhibit viscoelastic behavior and all the hydrogels have storage modulus values (>100 pa) which is greater than loss modulus values-indicating sufficient elasticity for vitreous application. The elastic nature of the hydrogel increases with the increase in PEG concentration. The gel is formed in between 2 and 3 min-indicating its applicationin situ. The viscosity of the developed hydrogels shows shear thinning behavior. The pre-gel solution of the hydrogel is injectable through a 22 G needle-indicating its applicationin situthrough vitrectomy surgery. All the hydrogels are hydrophilic and have water content of 96% approximately. Thus, the results show the positive properties for its application as a potential vitreous substitute.

Enhanced mechanical, biomineralization, and cellular response of nanocomposite hydrogels by bioactive glass and halloysite nanotubes for bone tissue regeneration

In the present study, the synergistic effect of the bioactive glass (BG) and halloysite nanotubes (HNTs) (i.e. BG@HNT) was evaluated on physicochemical and bioactive properties of polyacrylamide/poly (vinyl alcohol) (PMPV) based nanocomposite hydrogels. Here, a double-network hydrogel composed of organic-inorganic components was successfully developed by using in-situ free-radical polymerization and freeze-thawing process. Structural analyses confirmed the successful formation of the nanocomposite hydrogels through physical and chemical interactions. Morphological analysis showed that all hydrogel scaffolds are containing highly porous 3D microstructure and pore-interconnectivity. The equilibrium swelling ratio of the hydrogels was decreased by the addition of BG or BG@HNT and thereby the lower porosity and pore-size reduced the penetration of media and slow down the degradation process. Enhanced biomineralization ability of PMPV/BG@HNT was observed via apatite-forming ability (Ca/P: 1.21 ± 0.14) after immersion in the simulated body fluid as well as significantly enhanced dynamic mechanical properties (compressive strength: 102.1 kPa at 45% of strain and stiffness: 3115.0 N/m at 15% of strain). Furthermore, an enhanced attachment and growth of hFOB1.19 osteoblast cells on PMPV/BG@HNT was achieved compared to PMPV or PMPV/BG hydrogels over 14 days. The PMPV/BG@HNT nanocomposite hydrogel could have a promising application in low-load bearing bone tissue regeneration.

Graphene oxide-reinforced pectin/chitosan polyelectrolyte complex scaffolds

Three-dimensional (3D) porous scaffolds based on graphene oxide (GO) incorporated pectin/chitosan polyelectrolyte complex (PCGO) were prepared by the freeze-drying technique. The chemical composition and microstructure of the prepared PCGO scaffolds were studied by FTIR and XRD analysis. The presence of GO and its uniform distribution within the polymer matrix was confirmed by Raman spectroscopy and confocal Raman mapping analysis, respectively. TGA analysis revealed that the addition of GO improves the thermal stability of the pectin/chitosan complex. SEM analysis confirmed the uniform pore distribution of PCGO scaffolds. Moreover, it showed that the pore size of the scaffolds was decreased with the increase in GO content. Among the developed PCGO scaffolds, the scaffolds with 1 wt.% of GO presented the improved hydrophilicity by exhibiting the water swelling degree of 2004%, water retention capacity of 1101% and water contact angle (WCA) of 21°. In addition, these scaffolds presented better compressive strength (∼283 kPa) and resistance towards lysozyme-mediated degradation. The PCGO scaffolds presented an acceptable level of bio-and hemocompatibility and GO concentration-dependent cell attachment ability. These results demonstrate the suitability of PCGO scaffolds for tissue engineering.

Crosslinked Polydicyclopentadiene Nanoparticles via Ring-Opening Metathesis Polymerization-Induced Self-Assembly Approach

In this communication, the preparation of crosslinked polydicyclopentadiene (PDCPD) nanoparticles via ring-opening metathesis polymerization (ROMP)-induced self-assembly approach is reported. For the ROMPs, the macromolecular chain transfer agents (Macro-CTAs) are synthesized via the ring-opening polymerization (ROP) of ε-caprolactone (CL) with cis-2-butene-1,4-diol as the initiator. The ROMPs are performed with chloroform, tetrahydrofuran, toluene, 1,4-dioxane, and N,N-dimethylacetamide as the solvents, respectively, which are catalyzed with Grubbs second generation catalyst. It is found that the crosslinked PDCPD nanoparticles are obtained with spherical, cylindrical to planar morphologies, depending on the molecular weights of Macro-CTAs, the concentrations of DCPD and the natures of solvents. The polymerization induced self-assembly (ROMPISA) by the use of a non-norbornene-based macromolecular chain transfer agent provides a new and efficient approach to prepare crosslinked polymer nanoparticles.

Anti-fatigue, highly resilient photocrosslinkable gellan gum hydrogels reinforced by flexible nanoparticulate polyurethane multi-crosslinkers

In this study, multifunctional polyurethane nanoparticles (MPUNs) were embedded into the methacrylated gellan gum (MGG) to prepare stimuli-responsive hydrogels with improved mechanical properties including remarkable fatigue resistance and excellent self-recoverability. The photocurable MPUNs/MGG nanocomposite hydrogels with different formulations were synthesized through a facile and green solution mixing method. The result obtained from mechanical analysis displayed an excellent improvement in compression strength (120 6 ± 83.7 kPa) and ultimate strain (94.2 ± 2.7%) in the optimized formulation. Furthermore, the optimized formulation could restore approximately its original shape after continuous loading-unloading compression tests over 100 cycles which might result from its favorable crosslinked structure. These reinforced hydrogels exhibited a dual physical and chemical crosslinking mechanism based on the hydrogen bonding formation and photocrosslinking of methacrylate functional groups, respectively. Interestingly, the nanocomposite hydrogels exhibited no significant cytotoxicity to human dermal fibroblast cells which made them suitable as the appropriate biomaterials for the engineering of soft tissues.

New Insights into the Microstructural Analysis of Graphene Oxide

AIM AND OBJECTIVE

To explore the impact of synthesis conditions (temperature and time) on the properties of developed Graphene Oxide (GO).

BACKGROUND

A highly promising approach has been used for the synthesis of graphene oxide (GO) from graphite flakes using the modified Hummers method. Concentrated sulfuric acid was used as an intercalating agent and the oxidation was done with the help of potassium permanganate and hydrogen peroxide.

METHODS

The present method does not need expensive membranes for the filtration of Carbon and metalcontaining residues. The pre-cooling method is used to eradicate the explosive behavior of intermediate steps. The high quality of synthesized graphene oxides was confirmed by a series of characterization techniques, including Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, thermogravimetric analysis, energy-dispersive X-ray spectroscopy, and atomic force microscopy.

RESULTS

The results indicated the presence of Oxygen-containing functional groups, and a rise in the Oxygen content confirmed the synthesis of high-quality graphene oxide.

CONCLUSION

As per obtained experimental findings and subsequent analysis, the synthesized high-quality graphene oxide could be used in the design of membranes for water treatment applications.

Nanoporous Sodium Carboxymethyl Cellulose-g-poly (Sodium Acrylate)/FeCl3 Hydrogel Beads: Synthesis and Characterization

Novel sodium carboxymethyl cellulose-g-poly (sodium acrylate)/Ferric chloride (CMC-g-PNaA/FeCl3) nanoporous hydrogel beads were prepared based on the ionic cross-linking between CMC-g-PNaA and FeCl3. The structure of CMC and CMC-g-PNaA were elucidated by Fourier transform infrared spectroscopy (FTIR) and nuclear magnetic resonance (NMR) spectroscopy, and the elemental composition was analyzed by energy dispersive X-ray analysis (EDX). The physicochemical properties of the CMC-g-PNaA/FeCl3 hydrogel beads were analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM) and thermogravimetric analysis (TGA). The swelling percentage of hydrogel beads was studied at different time periods. The obtained CMC-g-PNaA/FeCl3 hydrogel beads exhibited a higher nanoporous morphology than those of CMC-g-PNaA and CMC beads. Furthermore, an AFM image of the CMC-g-PNaA/FeCl3 beads shows granule type topology. Compared to the CMC-g-PNaA (189 °C), CMC-g-PNaA/FeCl3 hydrogel beads exhibited improvement in thermal stability (199 °C). Furthermore, CMC-g-PNaA/FeCl3 hydrogel beads depicted a higher swelling percentage capacity of around 1452%, as compared to CMC-g-PNaA (1096%). Moreover, this strategy with preliminary results could be useful for the development of polysaccharide-based hybrid hydrogel beads for various potential applications.

Carbon Nanomaterials for Electro-Active Structures: A Review

The use of electrically conductive materials to impart electrical properties to substrates for cell attachment proliferation and differentiation represents an important strategy in the field of tissue engineering. This paper discusses the concept of electro-active structures and their roles in tissue engineering, accelerating cell proliferation and differentiation, consequently leading to tissue regeneration. The most relevant carbon-based materials used to produce electro-active structures are presented, and their main advantages and limitations are discussed in detail. Particular emphasis is put on the electrically conductive property, material synthesis and their applications on tissue engineering. Different technologies, allowing the fabrication of two-dimensional and three-dimensional structures in a controlled way, are also presented. Finally, challenges for future research are highlighted. This review shows that electrical stimulation plays an important role in modulating the growth of different types of cells. As highlighted, carbon nanomaterials, especially graphene and carbon nanotubes, have great potential for fabricating electro-active structures due to their exceptional electrical and surface properties, opening new routes for more efficient tissue engineering approaches.

Graphene oxide decorated with cellulose and copper nanoparticle as an efficient adsorbent for the removal of malachite green

In this study, the graphene oxide surface was modified by grafting of nanocellulose and copper nanoparticles to promote the surface charge and adsorption efficiency for malachite green (MG). The structural and configurational properties of GO-CEL-Cu were verified by UV/Vis, SEM, TEM, EDX and FTIR spectroscopy and confirmed the electrostatic interaction and hydrogen bonding between GO, CEL and Cu-NPs. TEM images confirmed the deposition of Cu-NPs size between 24 and 37 nm on the GO surface. The uniform fine particles size makes strong interfacial interaction with GO sheets result in efficient load transfer from the matrix to the hybrid. The variable parameters such as adsorbent amount, MG concentration, pH, time and temperature were investigated to achieve optimum experimental condition. The experimental data was justified by Langmuir isotherm model with adsorption capacity for GO, GO-Cu, GO-CEL, GO-CEL-Cu as 127.3, 149.2, 156.8 and 207.1 mg/g, respectively. The spontaneity and endothermic nature of the process were confirmed by negative Gibbs free energy and followed the pseudo-second-order rate equation. Additionally, positive values of enthalpy and entropy suggesting endothermic process and increase randomness during process, respectively. In conclusion, nanocomposite is capable to adsorb the toxic dye due to its well economic, eco-friendly, well adsorption rate and regeneration ability.

Cellulose Composites with Graphene for Tissue Engineering Applications

Tissue engineering is an interdisciplinary field that combines principles of engineering and life sciences to obtain biomaterials capable of maintaining, improving, or substituting the function of various tissues or even an entire organ. In virtue of its high availability, biocompatibility and versatility, cellulose was considered a promising platform for such applications. The combination of cellulose with graphene or graphene derivatives leads to the obtainment of superior composites in terms of cellular attachment, growth and proliferation, integration into host tissue, and stem cell differentiation toward specific lineages. The current review provides an up-to-date summary of the status of the field of cellulose composites with graphene for tissue engineering applications. The preparation methods and the biological performance of cellulose paper, bacterial cellulose, and cellulose derivatives-based composites with graphene, graphene oxide and reduced graphene oxide were mainly discussed. The importance of the cellulose-based matrix and the contribution of graphene and graphene derivatives fillers as well as several key applications of these hybrid materials, particularly for the development of multifunctional scaffolds for cell culture, bone and neural tissue regeneration were also highlighted.

Cellulose Nanocrystals/Graphene Hybrids-A Promising New Class of Materials for Advanced Applications

With the growth of global fossil-based resource consumption and the environmental concern, there is an urgent need to develop sustainable and environmentally friendly materials, which exhibit promising properties and could maintain an acceptable level of performance to substitute the petroleum-based ones. As elite nanomaterials, cellulose nanocrystals (CNC) derived from natural renewable resources, exhibit excellent physicochemical properties, biodegradability and biocompatibility and have attracted tremendous interest nowadays. Their combination with other nanomaterials such as graphene-based materials (GNM) has been revealed to be useful and generated new hybrid materials with fascinating physicochemical characteristics and performances. In this context, the review presented herein describes the quickly growing field of a new emerging generation of CNC/GNM hybrids, with a focus on strategies for their preparation and most relevant achievements. These hybrids showed great promise in a wide range of applications such as separation, energy storage, electronic, optic, biomedical, catalysis and food packaging. Some basic concepts and general background on the preparation of CNC and GNM as well as their key features are provided ahead.

Comparison of cast films and hydrogels based on chitin nanofibers prepared using TEMPO/NaBr/NaClO and TEMPO/NaClO/NaClO2 systems

Neutral TEMPO/NaClO/NaClO₂ (TNN) oxidation, with NaClO₂ as the primary oxidant under aqueous conditions at pH 6.8 was applied to selectively oxidize surface C6 primary hydroxyl groups of α-chitin to carboxylate groups. When 0.1 mmol TEMPO, 1 mmol NaClO and 20 mmol NaClO₂ were added to 1 g α-chitin, the yield of water-insoluble oxidized chitin was 91.93 %, and the carboxylate content was 0.695 mmol/g. The TNN oxidized chitin (TNN-Ch) was mostly converted to individual nanofibrils by mechanical disintegration in water, with mostly widths of 20-24 nm and average lengths of 1 μm. Compared to chitin nanofibers produced by TEMPO/NaBr/NaClO system (TBN-ChNs), with average widths of 16.67 ± 7.9 nm and average lengths of 770 ± 170 nm, TNN-ChNs were wider, longer and had a higher aspect ratio; its films and hydrogels also showed better mechanical properties, which indicated the size effect on the nanofiber-based materials resulted from different oxidation process.

Applications of Nanocellulose/Nanocarbon Composites: Focus on Biotechnology and Medicine

Nanocellulose/nanocarbon composites are newly emerging smart hybrid materials containing cellulose nanoparticles, such as nanofibrils and nanocrystals, and carbon nanoparticles, such as "classical" carbon allotropes (fullerenes, graphene, nanotubes and nanodiamonds), or other carbon nanostructures (carbon nanofibers, carbon quantum dots, activated carbon and carbon black). The nanocellulose component acts as a dispersing agent and homogeneously distributes the carbon nanoparticles in an aqueous environment. Nanocellulose/nanocarbon composites can be prepared with many advantageous properties, such as high mechanical strength, flexibility, stretchability, tunable thermal and electrical conductivity, tunable optical transparency, photodynamic and photothermal activity, nanoporous character and high adsorption capacity. They are therefore promising for a wide range of industrial applications, such as energy generation, storage and conversion, water purification, food packaging, construction of fire retardants and shape memory devices. They also hold great promise for biomedical applications, such as radical scavenging, photodynamic and photothermal therapy of tumors and microbial infections, drug delivery, biosensorics, isolation of various biomolecules, electrical stimulation of damaged tissues (e.g., cardiac, neural), neural and bone tissue engineering, engineering of blood vessels and advanced wound dressing, e.g., with antimicrobial and antitumor activity. However, the potential cytotoxicity and immunogenicity of the composites and their components must also be taken into account.

The role of cellulose nanocrystals in biocompatible starch-based clicked nanocomposite hydrogels

Starch-based nanocomposite hydrogels were successfully prepared by the Diels-Alder click cross-linking reaction between furan-functionalized starch derivative and a water-soluble tetrafunctional maleimide compound, adding cellulose nanocrystals (CNC) as nanoreinforcement. The effect of increasing the CNC content on rheological and swelling properties as well as on the morphology of the hydrogels was analyzed. Besides, in order to evaluate the applicability of the as-prepared hydrogels as delivery systems, drug release measurements and in vitro cytotoxicity assays were also performed. It was found that the prepared nanocomposite hydrogels presented higher stiffness as the CNC content increased. The incorporation of the nanocrystals modified the internal porous microstructure of the hydrogels, affecting consequently both the swelling capacity and the drug-delivery kinetics. Moreover, the prepared nanocomposite hydrogels showed non-toxic behavior, demonstrating their potential applicability in the biomedical field, especially as sustained drug delivery systems.