Alginate/soy protein system for essential oil encapsulation with intestinal delivery

Synthesis and characterization of ion-induced sodium alginate/soy protein isolate microgels for the controlled release

In this study, sodium alginate/ soy protein isolate (SPI) microgels cross-linked by various divalent cations including Cu2+, Ba2+, Ca2+, and Zn2+ were fabricated. Cryo-scanning electron microscopy observations revealed distinctive structural variations among the microgels. In the context of gastric pH conditions, the degree of shrinkage of the microgels followed the sequence of Ca2+ > Ba2+ > Cu2+ > Zn2+. Meanwhile, under intestinal pH conditions, the degree of swelling was ranked as Zn2+ > Ca2+ > Ba2+ > Cu2+. The impact of these variations was investigated through in vitro digestion studies, revealing that all microgels successfully delayed the release of β-carotene within the stomach. Within the simulated intestinal fluid, the microgel cross-linked with Zn2+ exhibited an initial burst release, while those cross-linked with Cu2+, Ba2+, or Ca2+ displayed a sustained release pattern. This research underscores the potential of sodium alginate/SPI microgels cross-linked with different divalent cations as efficient controlled-release delivery systems.

Sodium alginate/gelatin hydrogel spheres loaded with Fructus Ligustri Lucidi essential oil: Preparation, characterization and biological activity

The application of plant essential oils in the food industry is often hindered by their poor water solubility and high volatilize. Encapsulation has emerged as an effective solution to this problem. This study focuses on the preparation of Fructus Ligustri Lucidi essential oil gel spheres (FEOH) based sodium alginate and gelatin. The optimum formulation for FEOH was established by Box-Behnken Design response surface testing, resulting in a composition of 10 % FEO, 5 % TW20 and 2 % CaCl2. This formulation achieved an encapsulation efficiency of 85.56 %. FTIR and SEM results indicated the successful encapsulation of FEO within the gel spheres. Furthermore, DSC and TGA results showed that encapsulation enhanced the thermal stability of the essential oil. At room temperature, the water content of FEOH exceeded 90 %, and it showed the highest swelling ratio of 62.5 % in an alkaline medium at different pH conditions. The in vitro release behavior showed that FEOH was released up to 85.28 % in oil-based food simulants within 2 h. FEOH showed strong antibacterial activity, with a Minimum Inhibitory Concentration (MIC) of 128 mg/mL against Staphylococcus aureus and 256 mg/mL against Escherichia coli. The gel spheres obtained in this research show significant potential as food preservatives in food matrices.

Effects of nano zinc oxide and nano chitosan on the taste masking paracetamol granules

OBJECTIVE

The purpose of this study is to investigate the taste masking of Paracetamol granules in the range of 250-850 µm, coated by two nanocomposites prepared from Eudragit® E100, nanozinc oxide, and nanochitosan, respectively, from 1 to 5% by the weight of the granules.

METHODS

In this study, Paracetamol granules were coated in several formulas with two different types of nanocomposites (polymeric and mineral) on two sizes of granules to reduce bitter taste and with the FBC method and pH-sensitive polymers (Eudragit® E100).

RESULTS

The effect of nanoparticles (Nano zinc oxide and Nanochitosan) on taste-masking Paracetamol was studied with dissolution-coated granules in vitro by simulating in the oral (pH 6.8) range. Based on the results of the studies, the rate of drug release was confirmed by the taste test, and the formulated granule with 5% nano-chitosan (F14) had the best bitter taste mask function of all samples. These results were also confirmed by scanning electron microscopy (SEM) analysis, which showed a smoother and more stable surface than the samples obtained from other formulations.

CONCLUSION

In the comparison of the release of two types of nanocomposites in the dissolution test, it was shown that the type B granules of Paracetamol's 5% nano-chitosan-coated granule (F14) were released 99% less than Paracetamol's 5% nano-ZnO-coated granule (F11). and Paracetamol's 1% nano-chitosan-coated granule (F12) was released 91% less than Paracetamol's 1% nano-ZnO-coated granule (F9). The results showed that nano-chitosan-coated granules have better coverage of bitter taste instead of nano-ZnO.

Improving physicochemical, rheometry and sensory attributes of fortified beverages using jujube alcoholic/aqueous extract loaded Gellan-Protein macrocarriers

The use of phenolic bioactive substances in beverages is introduced by novel techniques as a functional food product. Gel beads from jujube extract were prepared by extrusion method using encapsulation and coated by whey protein isolate and soy protein isolate and thus, a functional beverage was prepared from these beads. There were three types of beads, including Gellan, Gellan/whey protein isolate and Gellan/soy protein isolate. The pH, acidity, Brix, turbidity, viscosity and sensory properties were evaluated. Observing the increase in pH is the result of the release of small amounts of fruit extract, the effect of which can be seen in the inverse relationship of acidity next to pH. The results demonstrate that the highest viscosity is related to protein beverages, especially Gellan gum/SPI beads' beverage. Hence, the highest turbidity in Gellan gum/SPI beads' beverage was visible on the 14th day (66.6 NTU). Thereby, there is potential for these Gellan beads beverages with suitable sensory scores to be wholly utilized and developed with the aim of this study. Along with it, this new beverage can attract the opinion of a wide range of consumers. Therewith, the industrialization of such types of products helps to improve the consumer market.

Multifunctional Pomegranate Peel Microparticles with Health-Promoting Effects for the Sustainable Development of Novel Nutraceuticals and Pharmaceuticals

Recovering the bioactive components from pomegranate peel (PP) in the fruit-processing industry has attracted great attention in terms of minimizing the waste burden, as well as providing a new source of a multitude of functional compounds. The present study aimed to develop a feasible microencapsulation process of PP extract by using pectin and a pectin/2-hydroxypropyl-β-cyclodextrin (HP-β-CD) blend as coating materials. Microsized powders obtained by a spray drying technique were examined in terms of technological characteristics, exhibiting high powder yield and desirable moisture content, flowability, and cohesive properties. Assuming that the interactions with the used biopolymers occur on the surface hydrophobic domain, their presence significantly improved the thermal stability of the microencapsulated powders up to 200 °C. The health-promoting effects of PP have been associated with its high content in ellagitannins, particularly punicalagin. The obtained PP powders exhibited strong antioxidant and hypoglycemic potential, while an antimicrobial assay revealed their potent activity against Gram-positive bacteria. Additionally, an in vitro release study suggested that the used biopolymers can modify the release of target bioactive compounds, thus establishing a basis for developing an oral-controlled release system. Altogether, biowaste valorization from PP by the production of effective multifunctional microsized powders represents a sustainable way to obtain novel nutraceuticals and/or pharmaceuticals.

The influence of ionic polysaccharides on the physicochemical and techno-functional properties of soy proteins; a comprehensive review

Since the world's population has surged in recent decades, the need for sustainable as well as environmentally friendly protein sources is growing. However, there are daunting challenges in utilizing these protein sources in the food industry due to their poor techno-functional properties compared with animal proteins. Numerous procedures have been introduced to improve plant protein functionalities with related pros and cons. Among them, complexation with polysaccharides is considered a safe and effective process for modulating plant proteins' technological and industrial applications. Notwithstanding the nutritional value of soy protein (SP) as a "complete protein," it is a crucial protein commercially because of its rank as the highest-traded plant-based protein worldwide. The current review deals with SP complexation with ionic polysaccharides, including chitosan, alginate, carrageenan, and xanthan gum, and their effects on the physicochemical and techno-functional properties of SP. Accordingly, the structure of SP and the abovementioned polysaccharides have been considered for a better understanding of the possible interactions. Then, the changes in the physicochemical and functional properties of SP and their potential applications in the formulation of plant-based food products have been discussed. Overall, ionic polysaccharides at optimum conditions would improve the functional properties of SP by altering its secondary structure, making it suitable for a wide range of applications in the food industry.

Binary Alginate-Whey Protein Hydrogels for Antioxidant Encapsulation

Encapsulation of antioxidants in hydrogels, i.e., three-dimensional networks that retain a significant fraction of water, is a strategy to increase their stability and bioaccessibility. In fact, low oxygen diffusivity in the viscous gelled phase decreases the rate of oxidation. Moreover, some hydrocolloids such as alginate and whey proteins provide a pH-dependent dissolution mechanism, allowing the retention of encapsulated compounds in the gastric environment and their release in the intestine, where they can be absorbed. This paper reviews the information on alginate-whey protein interactions and on the strategies to use binary mixtures of these polymers for antioxidant encapsulation. Results showed that alginate and whey proteins strongly interact, forming hydrogels that can be modulated by alginate molecular mass, mannuronic acid: guluronic acid ratio, pH, Ca²⁺ or transglutaminase addition. Hydrogels of alginate and whey proteins, in the forms of beads, microparticles, microcapsules, and nanocapsules, generally provide better encapsulation efficiency and release properties for antioxidants with respect to the hydrogel of alginate alone. The main challenges for future studies are to extend knowledge on the interactions among three components, namely alginate, whey proteins, and the encapsulated bioactive compounds, and to investigate the stability of these structures under food processing conditions. This knowledge will represent the rationale basis for the development of structures that can be tailored to specific food applications.

Controlled Drug Release from Nanoengineered Polysaccharides

Polysaccharides are naturally occurring complex molecules with exceptional physicochemical properties and bioactivities. They originate from plant, animal, and microbial-based resources and processes and can be chemically modified. The biocompatibility and biodegradability of polysaccharides enable their increased use in nanoscale synthesis and engineering for drug encapsulation and release. This review focuses on sustained drug release studies from nanoscale polysaccharides in the fields of nanotechnology and biomedical sciences. Particular emphasis is placed on drug release kinetics and relevant mathematical models. An effective release model can be used to envision the behavior of specific nanoscale polysaccharide matrices and reduce impending experimental trial and error, saving time and resources. A robust model can also assist in translating from in vitro to in vivo experiments. The main aim of this review is to demonstrate that any study that establishes sustained release from nanoscale polysaccharide matrices should be accompanied by a detailed analysis of drug release kinetics by modeling since sustained release from polysaccharides not only involves diffusion and degradation but also surface erosion, complicated swelling dynamics, crosslinking, and drug-polymer interactions. As such, in the first part, we discuss the classification and role of polysaccharides in various applications and later elaborate on the specific pharmaceutical processes of polysaccharides in ionic gelling, stabilization, cross-linking, grafting, and encapsulation of drugs. We also document several drug release models applied to nanoscale hydrogels, nanofibers, and nanoparticles of polysaccharides and conclude that, at times, more than one model can accurately describe the sustained release profiles, indicating the existence of release mechanisms running in parallel. Finally, we conclude with the future opportunities and advanced applications of nanoengineered polysaccharides and their theranostic aptitudes for future clinical applications.

Polyphenols—Ensured Accessibility from Food to the Human Metabolism by Chemical and Biotechnological Treatments

Polyphenols are plant-based compounds famous for their positive impact on both human health and the quality of food products. The benefits of polyphenols are related to reducing cardiovascular diseases, cholesterol management, cancers, and neurological disorders in humans and increasing the shelf life, management of oxidation, and anti-microbial activity in food products. The bioavailability and bio-accessibility of polyphenols are of the highest importance to secure their impact on human and food health. This paper summarizes the current state-of-the-art approaches on how polyphenols can be made more accessible in food products to contribute to human health. For example, by using food processing methods including various technologies, such as chemical and biotechnological treatments. Food matrix design and simulation procedures, in combination with encapsulation of fractionated polyphenols utilizing enzymatic and fermentation methodology, may be the future technologies to tailor specific food products with the ability to ensure polyphenol release and availability in the most suitable parts of the human body (bowl, intestine, etc.). The development of such new procedures for utilizing polyphenols, combining novel methodologies with traditional food processing technologies, has the potential to contribute enormous benefits to the food industry and health sector, not only reducing food waste and food-borne illnesses but also to sustain human health.

Improving probiotic survival using water-in-oil-in-water (W1/O/W2) emulsions: Role of fish oil in inner phase and sodium alginate in outer phase

Aqueous probiotic suspensions were dispersed in an oil phase consisting of fish oil and medium chain triglycerides to form W₁/O emulsions. These emulsions were then homogenized with an aqueous solution containing soybean protein isolate and sodium alginate to form W₁/O/W₂ emulsions. Fish oil was used to promote the growth of the probiotics and increase their ability to adhere to the intestinal mucosa. Sodium alginate increased the viscosity, stability, and probiotic encapsulation efficiency of the double emulsions, which was mainly attributed to its interactions with adsorbed soy proteins. The encapsulation efficiency of the probiotics in the double emulsions was relatively high (>96%). In vitro simulated digestion experiments showed that the double emulsions significantly increased the number of viable probiotics remaining after passing through the entire gastrointestinal tract. This study suggests that encapsulation of probiotics in double emulsions may increase their viability under gastrointestinal conditions, thereby enhancing their efficacy in functional foods.

Hybrid Microcapsules for Encapsulation and Controlled Release of Rosemary Essential Oil

The foremost objective of this work is to assess the microcapsules composition (polymer-based and polymer/clay-based) effect, on the release of rosemary essential oil into w/o medium and evaluate their antioxidant activity. Calcium alginate (CA) and calcium alginate/montmorillonite hybrid (CA-MTN) microcapsules were developed following an ionotropic crosslinking gelation and were used as host materials for the encapsulation of rosemary essential oil. The unloaded/loaded CA and hybrid CA-MTN microcapsules were characterized by Fourier transform infra-red (FT-ATR) spectroscopy, thermal analysis (TGA), scanning electron microscopy (SEM) and DPPH assay. The evaluation of the microcapsule's physicochemical properties has shown that the clay filling with montmorillonite improved the microcapsule's properties. The encapsulation efficiency improved significantly in hybrid CA-MTN microcapsules and exhibited higher values ranging from 81 for CA to 83% for hybrid CA-MTN and a loading capacity of 71 for CA and 73% for hybrid CA-MTN, owing to the large adsorption capacity of the sodic clay. Moreover, the hybrid CA-MTN microcapsules showed a time-extended release of rosemary essential oil compared to CA microcapsules. Finally, the DPPH assay displayed a higher reduction of free radicals in hybrid CA-MNT-REO (12.8%) than CA-REO (10%) loaded microcapsules. These results proved that the clay-alginate combination provides microcapsules with enhanced properties compared to the polymer-based microcapsules.

Producing mixed-soy protein adsorption layers on alginate microgels to controlled-release β-carotene

In this study, the effects of soy protein isolate (SPI) on the morphology, encapsulation efficiency, storage stability, swelling behavior, and in vitro digestion behavior of calcium alginate (CA) microgels were investigated. CA and calcium alginate-SPI (CAS) microgels with encapsulated β-carotene were prepared by extruding a mixture of alginate and SPI using a co-extrusion technique, followed by cross-linking with Ca²⁺. All microgels exhibited homogeneous sizes and spherical shapes, and CAS microgels showed high levels of protein loading efficiency. The encapsulation efficiency and storage stability of β-carotene within CAS microgels were higher than those within CA microgels. The introduction of SPI into CAS microgels resulted in a higher degree of gel size shrinkage in gastric fluid and a lower degree of swelling in intestinal fluid compared to CA microgels. In vitro digestion was conducted to investigate the effects of the addition of SPI on the release behavior of CA and CAS microgels. Results obtained showed that CAS microgels were more resistant to simulated gastric fluid than CA microgels. Cryo-scanning electron microscopy (cryo-SEM) and confocal laser scanning microscopy (CLSM) observations indicated that the release behavior was dependent on the porosity of the CA and CAS microgels, and the porosity was influenced by the concentration of SPI. This study showed that the introduction of SPI to CA microgels can lead to the development of an effective controlled release delivery system.

Application of Antiviral, Antioxidant and Antibacterial Glycyrrhiza glabra L., Trifolium pratense L. Extracts and Myristica fragrans Houtt. Essential Oil in Microcapsules

Viruses and bacteria can disrupt normal human functions; therefore, ways to use the beneficial properties of plants to promote health are constantly being researched. Plant materials that accumulate biologically active compounds can be used to create a new pharmaceutical form. This study aimed to investigate the biological activity of selected plant extracts and essential oil and to produce microcapsules. The main compounds in extracts and essential oil were determined using chromatographic methods, antioxidant activity was evaluated spectrophotometrically, antimicrobial activity was assessed by monitoring the growth of nine pathogens, and the antiviral effect on infected bird cells with coronavirus was evaluated. Trifolium pratense L. extract had the highest antioxidant (26.27 ± 0.31 and 638.55 ± 9.14 µg TE/g dw by the DPPH and ABTS methods, respectively) and antiviral activity (56 times decreased titre of virus). Liquorice extract expressed antibacterial activity against Gram-positive pathogens and the highest antioxidant activity using the FRAP method (675.71 ± 4.61 mg FS/g dw). Emulsion stability depended on excipients and their amount. Microcapsules with extracts and essential oil were 1.87 mm in diameter, and their diameter after swelling was increased more than two times in intestinal media, while less than 0.5 times in gastric media.

Development and characterization of probiotic (co)encapsulates in biopolymeric matrices and evaluation of survival in a millet yogurt formulation

The formulation of probiotics-enriched products still remains a challenge for the food industry due to the loss of viability, mainly occurring upon consumption and during storage. To tackle this challenge, the current study investigated the potential of using sodium alginate and inulin (SIN) in combination with various encapsulating materials such as skim milk (SKIM), whey protein concentrate (WPC), soy protein concentrate (SPC), and flaxseed oil (FS) to increase the viability of Lactobacillus casei upon freeze-drying, under simulated gastrointestinal conditions, during 28 days of storage at 4°C, and in a formulation of millet yogurt. Microstructural properties of microcapsules and co-microcapsules by SEM, oxidative stability of flaxseed oil in co-microcapsules, and physicochemical and sensory analysis of the product were performed. The produced microcapsules (SIN-PRO-SKIM, SIN-PRO-WP, and SIN-PRO-SP) and co-microcapsules (SIN-PRO-FS-SKIM, SIN-PRO-FS-WP, and SIN-PRO-FS-SP) had a high encapsulation rate >90%. Moreover, encapsulated and co-encapsulated strains exhibited a high in vitro viability accounting for 9.24 log10 CFU/g (SIN-PRO-SKIM), 8.96 log10 CFU/g (SIN-PRO-WP), and 8.74 log10 CFU/g (SIN-PRO-SP) for encapsulated and 10.08 log10 CFU/g (SIN-PRO-FS-SKIM), 10.03 log10 CFU/g (SIN-PRO-FS-WP), and 10.14 log10 CFU/g (SIN-PRO-FS-SP) for co-encapsulated. Moreover, encapsulated and co-encapsulated cells showed higher survival upon storage than free cells. Also, the SEM analysis showed spherical particles of 77.92-230.13 µm in size. The physicochemical and sensory analysis revealed an interesting nutritional content in the millet yogurt. The results indicate that the SIN matrix has significant promise as probiotic encapsulating material as it may provide efficient cell protection while also providing considerable physicochemical and nutritional benefits in functional foods.

Recent advances in essential oil complex coacervation by efficient physical field technology: A review of enhancing efficient and quality attributes

Although complex coacervation could improve the water solubility, thermal stability, bioavailability, antioxidant activity and antibacterial activity of essential oils (EOs). However, some wall materials (such as proteins and polysaccharides) with water solubility and hydrophobic nature limited their application in complex coacervation. In order to improve the properties of EO complex coacervates, some efficient physical field technology was proposed. This paper summarizes the application and functional properties of EOs in complex coacervates, formation and controlled-release mechanism, as well as functions of EO complex coacervates. In particular, efficient physical field technology as innovative technology, such as high pressure, ultrasound, cold plasma, pulsed electric fields, electrohydrodynamic atomization and microwave technology improved efficient and quality attributes of EO complex coacervates are reviewed. The physical fields could modify the gelling, structural, textural, emulsifying, rheological properties, solubility of wall material (proteins and polysaccharides), which improve the properties of EO complex coacervates. Overall, EOs complex coacervates possess great potential to be used in the food industry, including high bioavailability, excellent antioxidant capacity and gut microbiota in vivo, masking the sensation of off-taste or flavor, favorable antimicrobial capacity.

Design and characterization of whey protein nanocarriers for thyme essential oil encapsulation obtained by freeze-drying

Innovative coating powders, based on whey protein concentrate (10-15 wt%) as native (WPC) or denatured protein (d-WPC), solely or in combination with alginate (0.75 wt%, AL), containing thyme essential oil, were produced using the freeze-drying technique. The impact of individual components (protein, alginate and oil) as well as the effect of heat-induced protein denaturation, was resolved regarding physicochemical, thermal and morphological properties of powders. High product yield (∼100%), particle size (223-257 nm), low moisture content (0.10-0.13%) and zeta potential (-19 to -25.6 mV) were determined for all samples. Strong antimicrobial activity of thyme oil nanocarriers against foodborne pathogens was demonstrated. Thermogravimetric analysis (TGA) indicated enhanced thermal stability of encapsulated oil. The most specific bands of structural compounds were identified in Raman spectra of the tested formulations, but principal component analysis (PCA) on recorded spectra was necessary to show the differences between carriers of different wall materials.

Development, Characterization and Incorporation of Alginate-Plant Protein Covered Liposomes Containing Ground Ivy (Glechoma hederacea L.) Extract into Candies

Ground ivy (Glechoma hederacea L.) has been known as a medicinal plant in folk medicine for generations and, as a member of the Lamiaceae family, is characterized with a high content of rosmarinic acid. The aim of the present study was to formulate delivery systems containing bioactive compounds from ground ivy in encapsulated form and incorporated into candies. Liposomes were examined as the encapsulation systems that were additionally coated with an alginate–plant protein gel to reduce leakage of the incorporated material. Bioactive characterization of the ground ivy extract showed a high content of total phenolics (1186.20 mg GAE/L) and rosmarinic acid (46.04 mg/L). The formulation of liposomes with the high encapsulation efficiency of rosmarinic acid (97.64%), with at least a double bilayer and with polydisperse particle size distribution was achieved. Alginate microparticles reinforced with rice proteins provided the highest encapsulation efficiency for rosmarinic acid (78.16%) and were therefore used for the successful coating of liposomes, as confirmed by FT-IR analysis. Coating liposomes with alginate–rice protein gel provided prolonged controlled release of rosmarinic acid during simulated gastro-intestinal digestion, and the same was noted when they were incorporated into candies.

Cod Liver Oil’s Encapsulation into Sodium Alginate/Lupin Protein Beads and Its Application in Functional Meatballs’ Preparation

Cod liver oil (CLO) is an essential source of healthy ω-3 fatty acids to be employed in functional meals. However, its autoxidation sensitivity, solubility, and odour present it as challenging to handle. Its encapsulation might mitigate these problems. This research studied using alginate/lupine protein as a wall material for CLO encapsulation as well as to characterise CLO microcapsules for their size, sphericity factor, encapsulation efficiency, morphology (scanning electron microscopy), in vitro release, and thermal stability. In this study, the oxidative stability, quality parameters, and sensory attributes of meatballs enriched with free CLOs and encapsulated CLOs throughout storage at 4 ± 1 °C for 16 days were assessed. The CLO microspheres had a homogeneous round shape, a diameter of 0.82 ± 0.06 mm, a sphericity factor of 0.092 ± 0.01, an encapsulation efficiency of 95.62% ± 1.13%, and an accumulative release rate of 87.10% after 270 min in the stimulated gastrointestinal conditions. Additionally, it was discovered that encapsulated oil was more stable than free CLOs to heat treatments (70–100 °C, 24 h). pH, thiobarbituric acid-reactive substances, peroxide value, conjugated dienes value, and carbonyl content of meatballs enriched with microencapsulated CLOs were significantly lower when compared to free CLOs and/or control samples. CLO microcapsules improved the sensory characteristics of meatballs throughout storage; however, meatballs directly containing CLOs were rejected. Thus, the viability of alginate/LPI complex microcapsules containing CLOs to enrich meat products subjected to storage with refrigeration could be indicated without any change in the characteristics.

Protein complex nanoparticles reinforced with industrial hemp essential oil: Characterization and application for shelf-life extension of Rainbow trout fillets

•

Industrial hemp essential oil was successfully reinforced in formed nanoparticles.

•

Coating controlled the microbial growth of fish during storage.

•

The coated fishes retarded the increase of oxidation during storage.

•

Coating led to an extension in the shelf life of Rainbow trout fillets.

Essential oil of industrial hemp (Cannabis sativa L.) (IHEO) was reinforced in complexation of whey protein nanofibrils and mung bean protein nanoparticles (WPNF-MBP NPs) as a novel nano-carrier. A desirable retention rate range of 50.9–90.4% was confirmed for IHEO reinforced in WPNF-MBP NPs. Fourier transform infrared (FTIR) spectroscopy revealed that IHEO was successfully loaded within WPNF-MBP NPs without specific chemical interaction with the carrier matrix. The results indicated that incorporation of IHEO-reinforced WPNF-MBP NPs into active material coatings having acceptable inhibition activity against total viable and psychrotrophic bacteria. The coated fishes also retarded the increase of PV (peroxide value), TBA (thiobarbituric acid) and TVB-N (total volatile basic nitrogen) values during storage. The IHEO-reinforced WPNF-MBP NPs coating led to an extension in the shelf life of Rainbow trout fillets within 8–14 days of storage. Accordingly, IHEO-reinforced WPNF-MBP NPs can be suggested as a natural preservative for coating fishes.

HPMCAS-Coated Alginate Microparticles Loaded with Ctx(Ile21)-Ha as a Promising Antimicrobial Agent against Salmonella Enteritidis in a Chicken Infection Model

Salmonella enterica subsp. enterica serovar Enteritidis (S. Enteritidis) in poultry is most often transmitted by the fecal-oral route, which can be attributed to high population density. Upon encountering the innate immune response in a host, the pathogen triggers a stress response and virulence factors to help it survive in the host. The aim of this study was to evaluate the effect of hypromellose acetate/succinate (HPMCAS)-coated alginate microparticles containing the Ctx(Ile²¹)-Ha antimicrobial peptide (AMP) on both intestinal colonization and systemic infection of laying hens challenged with S. Enteritidis. The applied AMP microsystem reduced the bacterial load of S. Enteritidis in the liver, with a statistical significance between groups A (control, no Ctx(Ile²¹)-Ha peptide) and B (2.5 mg of Ctx(Ile²¹)-Ha/kg) at 2 days postinfection (dpi), potentially indicating the effectiveness of Ctx(Ile²¹)-Ha in the first stage of infection by S. Enteritidis. In addition, the results showed a significant decrease in the S. Enteritidis counts in the spleen and cecal content at 5 dpi; remarkably, no S. Enteritidis counts were observed in livers at 5, 7, and 14 dpi, regardless of the Ctx(Ile²¹)-Ha dosage (p-value <0.0001). Using the Chi-square test, the effect of AMP microparticles on S. Enteritidis fecal excretion was also evaluated, and a significantly lower bacterial excretion was observed over 21 days in groups B and C, in comparison with the untreated control (p-value <0.05). In summary, the use of HPMCAS-Ctx(Ile²¹)-Ha peptide microcapsules in laying hens drastically reduced the systemic infection of S. Enteritidis, mainly in the liver, indicating a potential for application as a feed additive against this pathogen.

The Layered Encapsulation of Vitamin B2 and β-Carotene in Multilayer Alginate/Chitosan Gel Microspheres: Improving the Bioaccessibility of Vitamin B2 and β-Carotene

This research underlines the potential of alginate multilayered gel microspheres for the layered encapsulation and the simultaneous delivery of vitamin B₂ (VB) and β-carotene (BC). Chitosan was used to improve the stability and controlled release ability of alginate-based gel microspheres. It was shown that a clear multilayered structure possessed the characteristics of pH response, and excellent thermal stability. The sodium alginate concentration and the number of layers had notable effects on mechanical properties and particle size of gel microspheres. Fourier-transform infrared spectroscopy and X-ray diffraction analyses further proved that VB and BC were encapsulated within the gel microspheres. Compared with the three-layer VB-loaded gel microspheres, the total release of VB from the three-layer VB and BC-loaded gel decreased from 93.23% to 85.58%. The total release of BC from the three-layer VB and BC-loaded gel increased from 66.11% to 69.24% compared with three-layer BC-loaded gel. The simultaneous encapsulation of VB and BC in multilayered gel microspheres can markedly improve their bioaccessibility and bioavailability. These results showed the multilayer gel microspheres synthesized herein have potential for applications in the layered encapsulation and simultaneous delivery of various bioactive substances to the intestinal tract.

Sodium alginate/soybean protein-epigallocatechin-3-gallate conjugate hydrogel beads: evaluation of structural, physical, and functional properties

Sodium alginate (SA) hydrogel beads have been extensively studied as delivery systems for bioactive compounds. Key challenges include overcoming the highly porous and poor emulsifying properties of SA hydrogels. Herein, soy protein isolate (SPI) was modified by covalent and noncovalent conjugation with epigallocatechin-3-gallate (EGCG), followed by complexation with SA to change the SA structure and fabricate hydrogel beads with low porosities. Microencapsulation beads were fabricated from SA-, SA/SPI-, and SA/SPI-modified EGCG complexes with a corn oil/quercetin mixture core. After the covalent and noncovalent SPI-modified EGCG complexes were combined with SA, the OH stretching vibration shifted, indicating that hydrogen bonds formed between the protein and SA, and the crystal structure of SA was destroyed. To achieve crosslinking, the beads were injected into a CaCl₂ solution, whereby Ca²⁺ ions replaced the Na⁺ ions in SA. Meanwhile, the addition of covalent and noncovalent SPI-modified EGCG complexes promoted the binding capacity of Ca²⁺ and SA. All hydrogel beads possessed open-cell microstructures with interconnecting pores. The SA/SPI-modified EGCG hydrogel beads exhibited smoother surfaces, thicker shells, and lower porosity than the SA hydrogel beads. Moreover, they exhibited significantly higher antioxidant activities. During digestion, all types of hydrogel bead maintained their structure, and only a small part of the encapsulated oil and quercetin was digested in the upper part of the gastrointestinal tract. In short, the formation mechanism of hydrogel beads was clarified, and hydrogel beads with low porosity and high antioxidation activities were successfully fabricated.

Montmorillonite with essential oils as antimicrobial agents, packaging, repellents, and insecticides: an overview

Essential oils (EOs) are complex natural mixtures of secondary plant metabolites that function as biocides and therapeutic agents. They are extensively used in bactericidal, virucidal, fungicidal, antiparasitic, insecticidal, pharmaceutical, and cosmetic products. However, certain characteristics, such as the volatility of EOs, hinder their widespread use. To mitigate this limitation, several studies have investigated combinations of EOs with natural materials, including clay minerals. Clay minerals are abundant in nature, biocompatible, and non-toxic to the environment and humans. Clay minerals such as montmorillonite possess available sites where EO molecules can interact. The combination of EOs with clay minerals produces new materials for various applications including antibacterial, antifungal, insecticidal/repellent, and active packaging materials. Therefore, this review focuses on the immobilization of several types of EOs in raw and modified montmorillonites. The applications of the described systems were evaluated and demonstrated the synergism of the properties of the isolated components as a function of different EOs incorporated in the silicate matrix.

Development and Advantages of Biodegradable PHA Polymers Based on Electrospun PHBV Fibers for Tissue Engineering and Other Biomedical Applications

Biodegradable polymeric biomaterials offer a significant advantage in disposable or fast-consuming products in medical applications. Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) is an example of a polyhydroxyalkanoate (PHA), i.e., one group of natural polyesters that are byproducts of reactions taking place in microorganisms in conditions with an excess carbon source. PHA polymers are a promising material for the production of everyday materials and biomedical applications. Due to the high number of monomers in the group, PHAs permit modifications enabling the production of copolymers of different compositions and with different proportions of individual monomers. In order to change and improve the properties of polymer fibers, PHAs are combined with either other natural and synthetic polymers or additives of inorganic phases. Importantly, electrospun PHBV fibers and mats showed an enormous potential in both the medical field (tissue engineering scaffolds, plasters, wound healing, drug delivery systems) and industrial applications (filter systems, food packaging). This Review summarizes the current state of the art in processing PHBV, especially by electrospinning, its degradation processes, and biocompatibility studies, starting from a general introduction to the PHA group of polymers.

A comprehensive parametric study for understanding the combined millifluidic and dripping encapsulation process and characterisation of oil-loaded capsules

AIM

This study aimed to utilise and optimise the millifluidic and dripping encapsulation technique to develop and characterise the oil-core capsules.

METHODS

Sodium alginate with Tween-20 (continuous phase) and sunflower oil (dispersed phase) were used in millifluidic system. After determining the surface and interfacial tensions and flow behaviour parameters, flow rates of phases and concentrations of alginate and Tween were optimised by the Taguchi method. The flow regime of droplets was also evaluated. Optimised millicapsules were characterised concerning morphology, dimension, encapsulation efficiency, SEM, FTIR and, DSC results.

RESULTS

Dripping flow regime during droplet formation was observed. Reducing the interfacial tension between the continuous and dispersed phases resulted in about a 10.18% reduction in diameter. Optimised millicapsules depicted spherical shape (0.03 ± 0.01) with 3.95 ± 0.05 mm size and 97.5 ± 0.2% encapsulation efficiency. The FTIR and DSC results confirmed the entrapment of oil.

CONCLUSION

Millifluidic and dripping method effectively encapsulated sunflower oil in core-shell capsules.

Evaluating the addition of xylooligosaccharides into alginate-gelatin hydrogels

Xylooligosaccharides (XOS) are emerging prebiotic that may improve structural features of biopolymer blends. The investigation around the conformation of XOS into the matrix of alginate and gelatin clarifies the potential applications of this formulation in the food industry as texture modifiers or encapsulation systems. Structural properties verified by flow behavior, SEM, XRD, and FT-IR demonstrated that the add up to 3% XOS into the alginate-gelatin blend formed a cohesive matrix, with smaller pores and crystalline structure, confirming the potential of xylooligosaccharides hydrogels for the development of functional and synbiotic foods.

Physically cross-linked chitosan/dextrin cryogels entrapping Thymus vulgaris essential oil with enhanced mechanical, antioxidant and antifungal properties

Herein, we entrapped Thymus vulgaris essential oil (EO) within the physically cross-linked sponge-like architecture of cryogels by ice template-assisted freeze-drying. Their 3D cryogenically-structured network was built through hydrogen bonding formed by blending two naturally-derived polysaccharides, chitosan and dextrin. The embedment of EOs within the cryogel matrix generates porous films with an increased elasticity that allows their fast shape recovery after full compression. Thus, the swollen EOs-loaded cryogel films exhibited an elastic modulus of 3.00 MPa, which is more than 40 times higher than that of polysaccharide films without EOs (an elastic modulus of only 0.07 MPa). In addition, the encapsulation of bioactive compounds endows the bio-based films with both antioxidant and antifungal properties, showing a radical scavenging activity of 65% and a zone inhibition diameter of 40 mm for Candida parapsilosis fungi. Our results recommend the entrapment of EOs into bio-based cryogel carriers as a straightforward approach to provide 'green' polysaccharide-based films having both improved physicochemical properties and remarkable antifungal activity.

Development of Innovative Chewable Gel Tablets Containing Nutmeg Essential Oil Microcapsules and Their Physical Properties Evaluation

Chewable gel tablets are a dosed pharmaceutical form, which can have an active substance, pharmacological effect, or value of nutrition. The texture of these tablets is soft, springy, flexible, and elastic—this is influenced by the chosen ingredients. The aim of this study was to prepare chewable gel tablets with nutmeg essential oil-loaded microcapsules and determine the volatile compounds released from this pharmaceutical form. Gel tablets were prepared by using gelatin as basis, nutmeg essential oil as active compound, and natural ingredients: thyme-sugar syrup, thyme extract, and citric acid as taste and color additives. Texture properties were measured by a texture analyzer. The release of volatile compounds from nutmeg essential oil and gel tablets were analyzed by headspace-gas chromatography with mass spectroscopy in control and artificial saliva conditions in vitro. Nutmeg essential oil microcapsules had influence on the gel tablet’s physical properties (p < 0.05, by comparing tablets without glycerol and relative sample with glycerol); glycerol protects the tablets from the formation of sugar crystals on top and keeps good physical parameters (p < 0.05). A total of 12 volatile compounds were identified in nutmeg essential oil, and the six compounds with the highest amounts were selected as controls. Gel tablets prolong the release time of volatile compounds and reduce the amount of the compounds compared to the microcapsules (p < 0.05).

Emulsion, hydrogel and emulgel systems and novel applications in cannabinoid delivery: a review

Emulsions, hydrogels and emulgels have attracted a high interest as tools for the delivery of poorly soluble hydrophobic nutraceuticals by enhancing their stability and bioavailability. This review provides an overview of these delivery systems, their unique qualities and their interactions with the human gastrointestinal system. The modulation of the various delivery systems to enhance the bioavailability and modify the release profile of bioactive encapsulates is highlighted. The application of the delivery systems in the delivery of cannabinoids is also discussed. With the recent increase of cannabis legalization across North America, there is much interest in developing cannabis edibles which can provide a consistent dose of cannabinoids per portion with a rapid time of onset. Indeed, the long time of onset of psychoactive effects and varied metabolic responses to these products result in a high risk of severe intoxication due to overconsumption. Sophisticated emulsion or hydrogel-based delivery systems are one potential tool to achieve this goal. To date, there is a lack of evidence linking specific classes of delivery systems with their pharmacokinetic profiles in humans. More research is needed to directly compare different classes of delivery systems for the gastrointestinal delivery of cannabinoids.

Alginate-based microparticles coated with HPMCP/AS cellulose-derivatives enable the Ctx(Ile21)-Ha antimicrobial peptide application as a feed additive

Microencapsulation is a potential biotechnological tool, which can overcome antimicrobial peptides (AMP) instabilities and reduce toxic side effects. Thus, this study evaluates the antibacterial activities of the Ctx(Ile²¹)-Ha AMP against multidrug-resistant (MDR) and non-resistant bacteria and develop and characterize peptide-loaded microparticles coated with the enteric polymers hydroxypropylmethylcellulose acetate succinate (HPMCAS) and hydroxypropylmethylcellulose phthalate (HPMCP). Ctx(Ile²¹)-Ha was obtained by solid phase peptide synthesis (SPPS) method, purified and characterized by HPLC and Mass Spectrometry. The peptide exhibited potent antibiotic activities against Salmonella enteritidis, Salmonella typhimurium, Pseudomonas aeruginosa (MDR), Acinetobacter baumannii (MDR), and Staphylococcus aureus (MDR). Ctx(Ile²¹)-Ha microencapsulation was performed by ionic gelation with high efficiency, maintaining the physical-chemical stability. Ctx(Ile²¹)-Ha coated-microparticles were characterized by DSC, TGA, FTIR-Raman, XRD and SEM. Hemolytic activity assay demonstrated that hemolysis was decreased up to 95% compared to single molecule. In addition, in vitro release control profile simulating different portions of gastrointestinal tract was performed and showed the microcapsules' ability to protect the peptide and release it in the intestine, aiming pathogen's location, mainly by Salmonella sp. Therefore, use of microencapsulated Ctx(Ile²¹)-Ha can be allowed as an antimicrobial controller in monogastric animal production as an oral feed additive (antimicrobial controller), being a valuable option for molecules with low therapeutic indexes or high hemolytic rates.

Polymeric Carriers Designed for Encapsulation of Essential Oils with Biological Activity

The article reviews the possibilities of encapsulating essential oils EOs, due to their multiple benefits, controlled release, and in order to protect them from environmental conditions. Thus, we present the natural polymers and the synthetic macromolecular chains that are commonly used as networks for embedding EOs, owing to their biodegradability and biocompatibility, interdependent encapsulation methods, and potential applicability of bioactive blend structures. The possibilities of using artificial intelligence to evaluate the bioactivity of EOs—in direct correlation with their chemical constitutions and structures, in order to avoid complex laboratory analyses, to save money and time, and to enhance the final consistency of the products—are also presented.

Coating Lacticaseibacillus rhamnosus GG in Alginate Systems: an Emerging Strategy Towards Improved Viability in Orange Juice

Fruit juices are successfully proposed as suitable probiotic vehicles, but researchers' efforts should be developed to avoid effects of bacteria overgrowing on sensory and nutritional cues of final products and to preserve viability of probiotic bacteria during storage. In the present study, encapsulation of Lacticaseibacillus rhamnosus GG strain in alginate systems was performed through ionotropic gelation technology. The alginate systems were optimized by using Box-Behnken Design to investigate the influence of three independent variables at three different levels: particle mean size and polydispersity index. The optimized probiotic-loaded alginate particles were added to orange juice samples. The viability of the probiotic strain, both as free and microencapsulated, was evaluated in orange juice stored at 5°C for 35 days. Morphology and size of probiotic-loaded alginate particles were found suitable for incorporation into juice. TEM analysis revealed that unloaded systems were clustered as nanoparticles (CL_NP), while the loaded sample appeared as a coated system (Coated_LGG). Microbiological evaluation revealed that the encapsulation assured the survival of Coated_LGG, with a reduction of less than 1-unit log in cellular density after 35 days of refrigerated storage in orange juice. Results indicated that the encapsulated bacteria did not affect the macroscopic properties neither the microbiological characteristic of orange juice; thus, it can be proposed as functional food.

Proteins from leguminous plants: from structure, property to the function in encapsulation/binding and delivery of bioactive compounds

Leguminous proteins are important nutritional components in leguminous plants, and they have different structures and functions depending on their sources. Due to their specific structures and physicochemical properties, leguminous proteins have received much attention in food and nutritional applications, and they can be applied as various carriers for binding/encapsulation and delivery of food bioactive compounds. In this review, we systematically summarize the different structures and functional properties of several leguminous proteins which can be classified as ferritin, trypsin inhibitor, β-conglycinin, glycinin, and various leguminous proteins isolates. Moreover, we review the development of leguminous proteins as carriers of food bioactive compounds, and emphasize the functions of leguminous protein-based binding/encapsulation and delivery in overcoming the low bioavailability, instability and low absorption efficiency of food bioactive compounds. The limitations and challenges of the utilization of leguminous proteins as carriers of food bioactive compounds are also discussed. Possible approaches to resolve the limitations of applying leguminous proteins such as instability of proteins and poor absorption of bioactive compounds are recommended.

Modulation of oligoguluronate on the microstructure and properties of Ca-dependent soy protein gels

Naturally-sourced oligoguluronate (GB) has Ca-binding ability and can be employed to modulate Ca-dependent gels. Here soy protein isolate (SPI) gel was used as a model to investigate the influence of GB on the microstructure and properties of Ca-dependent food gels. The results showed that GB significantly decreased the storage modulus (G'), mechanical strength, elasticity, hardness and chewiness of SPI gels. Among all samples, the gel containing 30 mM GB showed the most compact network structure and thus the highest water holding capacity of 77.5 %. It should be noted that Ca-GB dimers were beneficial to the gel formation and can modify the gel properties but have no impact on the gelation kinetics. The findings gained in this study confirmed the great potential of GB in modulating the structure and properties of Ca-dependent gels, thereby obtaining food products with desired characteristics (e.g., soft and brittle tofu).

Design of biopolymer carriers enriched with natural emulsifiers for improved controlled release of thyme essential oil

This work aims to characterize a novel system for thyme essential oil delivery based on the combination of natural emulsifiers (soy protein and soy lecithin) and alginate, produced using the extrusion technique. The formulations are optimized concerning alginate and soy protein concentrations (both 1 to 1.5 wt.%), and consequently lecithin amount, in order to achieve spherical beads in the range 2.0 to 2.3 mm and 1.2 to 1.4 mm, wet and dry, respectively. Fourier-transform infrared analysis was performed, proving that there are interactions between all components. Lecithin-soy protein synergistic combination improved entrapment efficiency of total polyphenols (for nearly 12%) and decreased thymol release in a simulated gastric solution for nearly 35%, in comparison with beads without lecithin. The addition of lecithin enhances the thermal properties of the polysaccharide-protein systems at 50 °C after 3 hr of heating. The mechanical stability of the biopolymer carriers is improved with lecithin addition and the elastic modulus varied from 80.06 to 123.7 kPa, depending on the formulation. Alginate/soy protein/lecithin are effective carriers for the encapsulation, protection, and controlled release of thyme essential oil. PRACTICAL APPLICATION: There is unfortunately growing human resistance to antibiotics. This work offers a novel system for effective protection and controlled release of thyme essential oil in the small intestine. The mechanical and thermal properties of the carrier were estimated as they indicate how the beads will be able to resist stress during their incorporation into food (i.e. cookies-mixing, baking). The proposed approach offers ''green advantage'' as arises from all-natural materials.

Effect of different biopolymer-based structured systems on the survival of probiotic strains during storage and in vitro digestion

BACKGROUND

This study aimed to evaluate the protective effect of different biopolymer systems on the viability of two probiotics (Lactobacillus rhamnosus and Streptococcus thermophilus) during storage and in vitro digestion. Methylcellulose (MC), sodium alginate (SA), and whey protein (WP)-based structures were designed and characterized in terms of pH, rheological properties, and visual appearance.

RESULTS

The results highlighted that the WP-system ensured probiotic protection during both storage and in vitro digestion. This result was attributed to a combined effect of the physical barrier offered by the protein gel network and whey proteins as a nutrient for microbes. On the other hand, surprisingly, the viscous methylcellulose-based system was able to guarantee good microbial viability during storage. However, this was not confirmed during in vitro digestion. The opposite results were obtained for sodium alginate beads.

CONCLUSION

The results suggest that the capacity of a polymeric structure to protect probiotic bacteria is a combination of structural organization and system formulation. © 2020 Society of Chemical Industry.

Development of New Formula Microcapsules from Nutmeg Essential Oil Using Sucrose Esters and Magnesium Aluminometasilicate

Essential oils are volatile liquids which evaporate and lose their pharmacological effect when exposed to the environment. The aim of this study is to protect nutmeg essential oil from environmental factors by encapsulation (shell material, sodium alginate) and determine the influence of crosslinker concentration (2%, 5% calcium chloride), different emulsifiers (polysorbate 80, sucrose esters), and magnesium aluminometasilicate on microcapsule physical parameters, encapsulation efficiency (EE), swelling index (SI), and other parameters. Nutmeg essential oil (NEO)-loaded calcium alginate microcapsules were prepared by extrusion. The swelling test was performed with and without enzymes in simulated gastric, intestinal, and gastrointestinal media. This study shows that the crosslinker concentration has a significant influence on EE, with 2% calcium chloride solution being more effective than 5%, and capsules being softer with 2% crosslinker solution. Using sucrose esters, EE is higher when polysorbate 80 is used. The swelling index is nearly three times higher in an intestinal medium without enzymes than in the medium with pancreatin. Microcapsule physical parameters depend on the excipients: the hardest capsules were obtained with the biggest amount of sodium alginate; the largest with magnesium aluminometasilicate. Sucrose esters and magnesium aluminometasilicate are new materials used in extrusion.