Effect of chemical modification with citric acid on the physicochemical properties and resistant starch formation in different starches

Production of resistant starches via citric acid modification: Effects of reaction conditions on chemical structure and final properties

Aiming to contribute to the current knowledge on the impact of reaction conditions on the chemical structure and target properties of starch citrates, in the current contribution different corn starch citrates were prepared by manipulation of reaction time, temperature and citric acid concentration. Modified starches were characterized in terms of chemical structure, morphology, crystallinity, swelling power and resistant starch content. For the first time, total substitution, crosslinking and monosubstitution degrees were quantitatively determined; and the relationship among final chemical structure, reaction conditions and target starch citrates properties was comprehensively analyzed. Products with total substitution values in the range of 0.075-0.24, crosslinking degrees in the 0.005-0.11 interval, and monosubstitution extents within the 0.05-0.12 range, were produced. By proper selection of reaction conditions products with almost 100 % of resistant starch were obtained. Results evidenced that starch citrates properties (mainly swelling power and RS content) depend on both chemical structure and the reaction conditions employed. Actually, the reaction temperature set (120 °C or 150 °C) proved to play a determinant role in the final products properties as evidenced from starch citrates with similar chemical structure and substantially different swelling and digestibility properties.

Effect of amylose partial extraction on citrate esterification of potato starch and its role in structure and physicochemical modification

This study examines the impact and influence of amylose on the starch esterification reaction through partial extraction of amylose. Citric acid was added for the esterification reaction, and then the esterified starches' multiscale structure, physicochemical, and functional properties were evaluated. As the extraction time of amylose increased, the amylose content in the starch decreased. Higher concentrations of citric acid will lead to samples with a higher degree of substitution, with DS rising from 0.203 % (0 h) to 0.231 % (3.5 h) at CA3 treatment. While removing amylose had minimal effects on the crystal structure of starch granules, it did decrease the ratio of A and B1 chains and the molecular weight of amylose. Acid hydrolysis exacerbated these changes upon the addition of citric acid. Furthermore, removing amylose followed by citrate esterification resulted in lower pasting viscosity, enthalpy of gelatinization (from 13.37 J to 2.83 J), and degree of short-range ordering. Also, digestion shows a decrease caused by the increasing content of slow-digesting starch. The presence of amylose in starch granules does affect the formation of starch esters, and removing it before esterification modification may improve production efficiency and reduce costs to some extent.

Effects of different pretreatment methods on the degree of substitution, structure, and physicochemical properties of synthesized malic acid sweet potato starch ester

BACKGROUND

The preparation of malic acid starch ester (MSE) is mostly carried out using a high temperature method, but there are problems such as high energy consumption, long preparation time, and uneven heating. Microwave technology can be used to overcome these limitations. The semi-crystalline structure of starch granules hinders the modifier's access to the matrix, thus limiting the esterification reaction. Physical techniques can act on the interior of the starch to create a number of active sites, thereby facilitating the reaction of the starch with esterification reagents. Therefore, this study investigated the effect of starch pretreatment by microwave, heat-moisture, and ultrasonic techniques on the degree of substitution (DS), structure, and physicochemical properties of MSE synthesized by the microwave method.

RESULTS

The DS of MSE was increased after pretreatments. The modified starch obtained by different pretreatment methods did not show new characteristic peaks, while the MSE synthesized showed new absorption peaks near 1735 cm-1. The granular structure and morphology of the modified starch obtained by microwave and heat-moisture pretreatment were gelatinized and aggregated, while some of the starch particles of the modified starch obtained by ultrasonic pretreatment appeared pore-sized. The relative crystallinity and gelatinization enthalpy of the MSE were reduced, but the crystallization pattern remained as A-type.

CONCLUSION

Overall, the results suggest that various pretreatment methods can enhance the DS of MSE by disrupting the structure of starch. The findings of this study provide theoretical support for improving the DS of esterified starch. © 2024 Society of Chemical Industry.

An Attempt to Replace Pure Citric Acid with Natural Lemon Juice during Potato Starch Esterification

The application of chemical operations in food processing, in which pure chemical compounds are used to modify food ingredients, often raises social concerns. One of the most frequently modified dietary substances is starch, e.g., E1401-E1404, E1412-E1414, E1420, E1422, E1440, E1442, and E1450-E1452. An alternative solution to chemical treatments seems to be the use of raw materials naturally containing substrates applied for starch modification. Heating starch with a lemon juice concentrate can be considered a novel and effective method for producing starch citrate, which is part of the so-called "green chemistry". The modified preparations obtained as a result of potato starch esterification with natural lemon juice had a comparable degree of esterification to that of the esters produced with pure citric acid. In addition, the use of the juice doubled their resistance to amylolytic enzymes compared to the preparations made with pure acid. Replacing citric acid with lemon juice can facilitate the esterification process, and the analyzed properties of both types of modified preparations indicate that starch esters produced with pure citric acid can be successfully replaced by those produced using natural lemon juice, which may increase the social acceptance of these modified preparations.

Heat-moisture and acid treatments can increase levels of resistant starch in arrowroot starch without adversely affecting its prebiotic activity in human colon microbiota

Carbohydrates are an important macronutrient whose processing and digestive fate can have numerous beneficial or adverse effects on consumer health. This study investigated the impact of heat-moisture treatments (HMT) and citric acid treatments (CAT) on arrowroot starch (ARS) with a focus on its physicochemical properties, digestibility, and influence on gut microbiota. The results revealed that HMT and CAT did not alter the colloidal characteristics of ARS but significantly affected the balance between amorphous and crystalline regions. Changes in thermal properties, morphology, and particle size were also observed. These can influence ARS shelf life and functional properties in various food applications. Furthermore, certain treatments in both processing methods increased the resistant starch (RS) content of ARS, with HMT for 16 hours at 80 °C and CAT with 0.6 M citric acid, resulting in the most pronounced effects. These changes coincided with reductions in rapidly digestible starch (RDS) levels and improvements in the ratio of slowly digestible starch (SDS) to RDS, which could potentially improve glycemic control. This study also examined the impact of processed ARS on colonic microbiota composition. It found that ARS-derived RS formed under HMT and CAT did not negatively affect the prebiotic potential of the RS fraction. Both treatments were associated with lowering the Firmicutes to Bacteroidetes ratio (F/B), a marker of gut health, and decreasing the relative abundance of Proteobacteria, microbes associated with adverse health effects. Additionally, CAT-derived RS showed a significant increase in the relative abundance of Roseburia, a beneficial gut bacterium. In conclusion, processing ARS through HMT and CAT techniques has the potential for enhancing its RS content, improving its glycemic impact, and positively influencing the gut microbiota composition, potentially contributing to gut health and metabolic well-being.

Characteristics of Citrate-Esterified Starch and Enzymatically Debranched Starch and Their Effects on Diabetic Mice

Chickpea has significant benefits as an adjuvant treatment for type 2 diabetes mellitus (T2DM). The properties of chickpea resistant starches (RSs) and their abilities to reduce T2DM symptoms and control intestinal flora were investigated. The RS content in citrate-esterified starch (CCS; 74.18%) was greater than that in pullulanase-modified starch (enzymatically debranched starch (EDS); 38.87%). Compared with those of native chickpea starch, there were noticeable changes in the granular structure and morphology of the two modified starches. The CCS showed surface cracking and aggregation. The EDS particles exhibited irregular layered structures. The expansion force of the modified starches decreased. The CCS and EDS could successfully lower blood glucose, regulate lipid metabolism, lower the levels of total cholesterol (TC) and low-density lipoprotein cholesterol (LDL-C), reduce the expressions of interleukin-6 (IL-6) and interleuki n-10 (IL-10), and decrease diabetes-related liver damage. Moreover, the CCS and EDS altered the intestinal flora makeup in mice with T2DM. The abundance of Bacteroidota increased. Both types of chickpea RSs exhibited significant hypoglycaemic and hypolipidaemic effects, contributing to the reduction in inflammatory levels and the improvement in gut microbiota balance.

"Development and characterization of edible films based on starch isolated from different Colombian potato varieties"

This work reports on the extraction and characterization of the behavior of starch from residues of several potato varieties (Criolla, Sabanera and Pastusa) of Colombian origin from the Andean region using different techniques and the evaluation of the effect of citric acid (CA) on the grain morphology. Additionally, films were produced with each one of the extracted starches and glycerol. Pastusa variety starch shows a higher granule size than the other varieties and Pastusa starch shows lower amylose content compared to Sabanera and Criolla. Criolla and Pastusa starches exhibit more thermal stability than Sabanera starch. Starch-glycerol films were also produced using the cast solving method. The films were mechanically analyzed by tensile test and the barrier properties were assessed by water vapor permeability (WVP). The tensile strength of the films varied in the 2.0-2.4 MPa range, while the elongation at break was comprised between 25 and 32 %. With regard to water vapor permeability, the obtained values fall within the 4-7 × 10-10 g m-1 s-1 Pa-1 range. It was observed that the thickness of the films and the protein content affected water vapor permeability, increasing this value at higher levels of thickness.

Effect of dry heat and its combination with vacuum heat on physicochemical, rheological and release characteristics of Alocasia macrorrhizos retrograded starches

Retrograded starches have received increasing attention due to their potential excipient properties in pharmaceutical formulations. However, to evade its application-oriented challenges, modification of retrograded starch is required. The study emphasizes influence of dry heating and the dual heat treatment by dry heating amalgamation with the vacuum heat treatment on quality parameters of retrograded starch. The starch was isolated by using two different extraction media (0.05 % w/v NaOH and 0.03 % citric acid) from Alocasia macrorrhizos and then retrograded separately. Further, retrograded starches were first modified by dry heating and afterwards modified with combination of dry and vacuum heating. Modification decreased moisture, ash content and increased solubility. Modified Samples from NaOH media had higher water holding capacity and amylose content. X-ray diffraction revealed type A and B crystals with increasing crystallinity of retrograded heat-modified samples from NaOH media. Thermogravimetric analysis, differential scanning calorimetry confirmed thermal stability. Shear tests showed shear-thinning behavior whereas dominant storage modulus (G/) over loss modulus (G//), depicting gel-like behavior. Storage, loss, and complex viscosity initially increased, then decreased with temperature. In-vitro release reflects, modified retrograded starches offers versatile drug release profiles, from controlled to rapid. Tailoring starch properties enables precise drug delivery, enhancing pharmaceutical formulation flexibility and efficacy.

Physicochemical properties and in vitro digestibility of ginseng starches under citric acid-autoclaving treatment

In this study, the effects of citric acid-autoclaving (CA-A) treatment on physicochemical and digestive properties of the native ginseng starches were investigated. The results showed that ginseng starch exhibited a B-type crystal structure with a low onset pasting temperature of 44.23 ± 0.80 °C, but high peak viscosity and setback viscosity of 5897.34 ± 53.72 cP and 692.00 ± 32.36 cP, respectively. The granular morphology, crystal and short-range ordered structure of ginseng starches were destroyed after CA-A treatment. The more short-chain starches were produced, resulting in the ginseng starches solubility increased. In addition, autoclaving, citric acid (CA) and CA-A treatment promoted polymerization and recrystallization of starch molecules, increased the proportion of amylopectin B1, and B3 chains, and improved molecular weight and resistant starch (RS) content of ginseng starches. The most significant multi-scale structural change was induced by CA-A treatment, which reduced the relative crystallinity of ginseng starch from 28.26 ± 0.24 % to 2.75 ± 0.08 %, and increased the content of RS to 54.30 ± 0.14 %. These findings provided a better understanding of the structure and properties of Chinese ginseng starches and offered new ideas for the deep processing of ginseng foods.

Effects of microwave radiation on the physicochemical properties, structure, and digestibility of the synthesized different crystal forms of malic acid starch ester

The effects of microwave combined with L-malic acid treatment on the degree of substitution (DS), structure, physicochemical properties, and digestibility of sweet potato starch (A-type), potato starch (B-type), and pea starch (C-type) were evaluated. The order of DS obtained was: DSM-POS > DSM-SPS > DSM-PES. Fourier transform-infrared spectroscopy (FT-IR) showed that the obtained modified starch produced a new absorption band at 1735 cm-1. Scanning electron microscopy (SEM) and polarized light microscopy indicated that different types of native starches exhibited different granular morphologies and appeared to have different degrees of damage, but still had polarized crosses after modification. Sweet potato starch had the smallest particle size, while potato starch had the largest. X-ray diffractometry (XRD) showed that the modified starches still retained the same crystal structure as the native starches, but the relative crystallinity decreased. The apparent viscosity and swelling power of modified starches dropped, but their water/oil holding capacity, amylose content, and resistant starch content all increased. The results demonstrate that the degree of influence on the structure, physicochemical properties, and digestibility of different starches varies under the same modification conditions.

Characterization of Polylactic Acid Biocomposites Filled with Native Starch Granules from Dioscorea remotiflora Tubers

Biocomposites were fabricated utilizing polylactic acid (PLA) combined with native starch sourced from mountain's yam (Dioscorea remotiflora Knuth), an underexplored tuber variety. Different starch compositions (7.5, 15.0, 22.5, and 30.0 wt.%) were blended with PLA in a batch mixer at 160 °C to produce PLA/starch biocomposites. The biocomposites were characterized by analyzing their morphology, particle size distribution, thermal, X-ray diffraction (XDR), mechanical, and dynamic mechanical (DMA) properties, water absorption behavior, and color. The results showed that the amylose content of Dioscorea remotiflora starch was 48.43 ± 1.4%, which corresponds to a high-amylose starch (>30% of amylose). Particle size analysis showed large z-average particle diameters (Dz0) of the starch granules (30.59 ± 3.44 μm). Scanning electron microscopy (SEM) images showed oval-shaped granules evenly distributed throughout the structure of the biocomposite, without observable agglomeration or damage to its structure. XDR and DMA analyses revealed an increase in the crystallinity of the biocomposites as the proportion of the starch increased. The tensile modulus (E) underwent a reduction, whereas the flexural modulus (Eflex) increased with the amount of starch incorporated. The biocomposites with the highest Eflex were those with a starch content of 22.5 wt.%, which increased by 8.7% compared to the neat PLA. The water absorption of the biocomposites demonstrated a higher uptake capacity as the starch content increased. The rate of water absorption in the biocomposites followed the principles of Fick's Law. The novelty of this work lies in its offering an alternative for the use of high-amylose mountain's yam starch to produce low-cost bioplastics for different applications.

Investigating the influence of CaCl2 induced surface gelatinization of red adzuki bean starch on its citric acid esterification modification: Structure-property related mechanism

This study prepared starch with different degrees of gelatinization (10 % and 30 %) by CaCl2, and further combined with citric acid at different concentrations (10 %, 20 %, and 30 %) for esterification. The results indicated that CaCl2 induced surface gelatinization and the esterification promoted its fragmentation. This synergistic modification induced depolymerization of starch chains and a decrease in molecular weight, although starch's Maltese cross, growth rings, and crystal type remained unchanged. Moreover, the synergistic modification induces a short-range ordered structure loss and the enthalpy decrease of starch, which induce starch pasting properties decrease and solubility increase. Furthermore, the introduction of ester groups by esterification increases the resistant starch content by limiting the binding sites for digestive enzymes. In conclusion, surface gelatinization can increase active reaction sites by disrupting the starch shell structure, and serves as a potential pretreatment to enhance the deep application of esterified starch in food and pharmaceutical fields.

Effects of crosslinking agents on properties of starch-based intelligent labels for food freshness detection

The impact of citric acid, carboxymethyl cellulose, carboxymethyl starch, sodium trimetaphosphate, or soybean protein on the crosslinking of starch-based films was examined. These crosslinking starch films were then used to create pH-sensitive food labels using a casting method. Blueberry anthocyanins were incorporated into these smart labels as a pH-sensitive colorimetric sensor. The mechanical properties, moisture resistance, and pH responsiveness of these smart labels were then examined. Crosslinking improved the mechanical properties and pH sensitivity of the labels. These different crosslinking agents also affected the hydrophobicity of the labels to varying degrees. Soybean protein was the only additive that led to labels that could sustain their structural integrity after immersion in water for 12 h. Because it increased the hydrophobicity of the labels, which decreased their water vapor permeability, moisture content, swelling index, and water solubility by 47 %, 29 %, 52 % and 10 %, respectively. The potential of using these labels to monitor the freshness of chicken breast was then examined. Only the films containing soybean protein exhibited good pH sensitivity, high structural stability, and low pigment leakage. This combination of beneficial attributes suggests that the composite films containing starch and soybean protein may be most suitable for monitoring meat freshness.

Functionalization Methods of Starch and Its Derivatives: From Old Limitations to New Possibilities

It has long been known that starch as a raw material is of strategic importance for meeting primarily the nutritional needs of people around the world. Year by year, the demand not only for traditional but also for functional food based on starch and its derivatives is growing. Problems with the availability of petrochemical raw materials, as well as environmental problems with the recycling of post-production waste, make non-food industries also increasingly interested in this biopolymer. Its supporters will point out countless advantages such as wide availability, renewability, and biodegradability. Opponents, in turn, will argue that they will not balance the problems with its processing and storage and poor functional properties. Hence, the race to find new methods to improve starch properties towards multifunctionality is still ongoing. For these reasons, in the presented review, referring to the structure and physicochemical properties of starch, attempts were made to highlight not only the current limitations in its processing but also new possibilities. Attention was paid to progress in the non-selective and selective functionalization of starch to obtain materials with the greatest application potential in the food (resistant starch, dextrins, and maltodextrins) and/or in the non-food industries (hydrophobic and oxidized starch).

Extraction, modification, and characterization of native litchi seed (Litchi chinesis Sonn.) starch

BACKGROUND

Litchi seeds, because of their high starch content, have the potential to serve as a valuable non-conventional source of starch with various applications. This study aimed to optimize the extraction of native litchi seed and its modification using citric acid. Response surface methodology was used to determine the optimal combination of the independent variables extraction temperature (30-60 °C), and extraction time (4-20 h), to obtain the maximum starch yield (%). Starch was then modified chemically with citric acid concentrations of 20% and 40% to investigate its effect on physicochemical, morphological, and functional properties.

RESULTS

The second-order polynomial model effectively described the experimental data, demonstrating a satisfactory fit for the observed results. The optimized condition with the highest starch recovery (212.4 g kg-1 ) was found to have an extraction temperature of 30 °C and an extraction time of 11 h. It was observed that an increase in concentration of citric acid resulted in a decrease in amylose content, swelling power, and solubility, and the water absorption capacity of modified starch increased. The scanning electron microscopy (SEM) micrographs showed that citric acid modification resulted in surface irregularities, whereas the shape and size of granules remained unaffected. Not much difference was observed in the X-ray diffraction (XRD) pattern of modified starch except for the decrease in the intensities of peaks. An effect on the thermal properties of modified starch was also observed.

CONCLUSION

The results of the study reveal that extraction temperature and extraction time are critical factors, exerting a significant effect on the extraction yield of starch. Furthermore, modified starches with improved functional properties can serve as novel and versatile sources of starch in various food and non-food sectors. © 2023 Society of Chemical Industry.

Comprehensive review on single and dual modification of starch: Methods, properties and applications

Starch is a natural, renewable, affordable, and easily available polymer used as gelling agents, thickeners, binders, and potential raw materials in various food products. Due to these techno-functional properties of starch, food and non-food industries are showing interest in developing starch-based food products such as films, hydrogels, starch nanoparticles, and many more. However, the application of native starch is limited due to its shortcomings. To overcome these problems, modification of starch is necessary. Various single and dual modification processes are used to improve techno-functional, morphological, and microstructural properties, film-forming capacity, and resistant starch. This review paper provides a comprehensive and critical understanding of physical, chemical, enzymatic, and dual modifications (combination of any two single modifications), the effects of parameters on modification, and their applications. The sequence of modification plays a key role in the dual modification process. All single modification methods modify the physicochemical properties, crystallinity, and emulsion properties, but some shortcomings such as lower thermal, acidic, and shear stability limit their application in industries. Dual modification has been introduced to overcome these limitations and maximize the effectiveness of single modification.

Cross-linked modifications of starches from colored highland barley and their characterizations, digestibility, and lipolysis inhibitory abilities in vitro

To promote the stability and functionality of native starch from colored highland barley (CHBS), the cross-linked modifications with sodium trimetaphosphate (STMP)/sodium tripolyphosphate (STPP) and citric acid were conducted to prepare CHB resistant starches (CHRSs), whose physicochemical characteristics, digestibility, and lipolysis inhibitory potential were also assessed. Results showed that the resistant starch amounts in CHBS were significantly increased after cross-linking and differed slightly among CHRSs. Citric acid modification of CHBS resulted in significantly higher amylose amounts, solubilities, swelling powers, and water-binding capacities than those under STMP/STPP modification within the cultivars (p < 0.05), with their crystalline patterns of A-type (white and blue) and CB-type (black). STMP/STPP modified CHBS exhibited higher degrees of crystalline regions with B-type crystalline patterns. Due to the differences in structural properties and structure-based morphology, STMP/STPP cross-linked CHBS showed lower digestibility and citric acid cross-linked CHBS exhibited higher lipolysis inhibitory activities. Besides, the cross-linked modifications demonstrated more enhancements in functionalities of starches from white and blue cultivars than black cultivar.

Core-shell starch as a platform for reducing starch digestion and saturated fat intake

Ill-balanced diets, especially high-carbohydrate and high-fat diets, have led to an explosion of diabetes and cardiovascular diseases worldwide, posing great threats to human health. The structural design of functional foods can offer promising solutions to these afflictions. Here, we introduce a versatile core-shell starch made from food-grade starch and alcohol-soluble protein to reduce starch digestion and saturated fat intake. The fabrication of core-shell structure is realized through an anti-solvent method, assisted by electrostatic interaction, which is generalizable to starches and proteins from different sources and feasible for scale-up production. The protein shell imparts a higher gelatinization temperature and a lower pasting viscosity to the starch, suggesting restricted granule swelling, which leads to a reduced starch digestibility as proved by in vitro digestion studies. The hypoglycemic effect of core-shell starch is demonstrated in vivo. We also show that the application of core-shell starch can be extended to oil encapsulants and saturated fat replacers due to the impact of protein shell on the surface hydrophobicity of the starch. These results may advance the establishment of healthy diets and the tackling of diet-related diseases.

Starch-based controlled release fertilizers: A review

Starch, as a widely available renewable resource, has the potential to be used in the production of controlled-release fertilizers (CRFs) that support sustainable agriculture. These CRFs can be formed by incorporating nutrients through coating or absorption, or by chemically modifying the starch to enhance its ability to carry and interact with nutrients. This review examines the various methods of creating starch-based CRFs, including coating, chemical modification, and grafting with other polymers. In addition, the mechanisms of controlled release in starch-based CRFs are discussed. Overall, the potential benefits of using starch-based CRFs in terms of resource efficiency and environmental protection are highlighted.

Real-time monitoring of the starch cross-linking with citric acid by chemorheological analysis

Cross-linking has been used as a strategy to improve the mechanical properties of starch films. However, the concentration of the cross-linking agent and the cure time and temperature determine the structure and properties of the modified starch. This article, for the first time, reports the chemorheological study of cross-linked starch films with citric acid (CA) through monitoring the storage modulus as a function of time G'(t). In this study, a CA concentration of 10 phr showed a pronounced increase of G'(t) during the cross-linking of starch, followed by a constant plateau. Analyses of infrared spectroscopy validated the result chemorheological. In addition, the mechanical properties showed a plasticizing effect of the CA at high concentrations. This research demonstrated that chemorheology is a valuable tool in the study of starch cross-linking, which becomes a promising technique to evaluate the cross-linking of other polysaccharides and cross-linking agents.

A Prospective Review on the Research Progress of Citric Acid Modified Starch

Citric acid (CA) treatment is a convenient, mild and environmentally friendly strategy to modify the composition, structure and function of starch through hydrolysis and esterification, which expands the application of starch in industry. In this paper, the effects of CA modification on amylose content, amylopectin chain length distribution, microscopic morphology, solubility and swelling ability, thermodynamic properties, gelatinization properties, digestibility properties, texture properties and the film-forming properties of starch were summarized. The application status and development trend of CA modified starch were reviewed, which has important implications for the targeted utilization of CA modified starch in the future.

Resistant starch from sweet potatoes: Recent advancements and applications in the food sector

In tropical and subtropical areas, tuber and root crops are staple foods and a key source of energy. Sweet potato (SP) is currently regarded as one of the world's top ten foods because of its diverse sizes, shapes, color, and health benefits. The resistant starch (RS) content of SP is substantial. It is predicted to become the cheapest item in the food industry due to its extensive variety, food stability, emulsifier and fat substitution capabilities, and as filler. As a result, interest in SP-sourced RS has recently increased. Due to their unique nutritional and functional qualities, novelty has become a popular research focus in recent years. This review will summarize the current understanding of SP starch components and their impact on the technological and physicochemical properties of produced starch for commercial viability. The importance of sweet potato RS in addressing future RS demand sustainability is emphasized. SPs are a viable alternative to tubers as a sustainable raw material for RS production. It has an advantage over tubers because of its intrinsic nutritional value and climatic endurance. Thermal, chemical, and enzymatic treatments are effective RS manufacturing procedures. The adaptability of sweet potato RS allows for a wide range of food applications.

Study of Changes in Crystallinity and Functional Properties of Modified Sago Starch (Metroxylon sp.) Using Physical and Chemical Treatment

Sago starch has weaknesses such as low thermal stability and high syneresis. Modifications were made to improve the characteristics of native sago starch. In this study, sago starch was modified by autoclave-heating treatment (AHT), osmotic-pressure treatment (OPT), octenyl-succinic anhydride modification (OSA), and citric acid cross-linking (CA). This study aimed to examine the changes in chemical composition, crystallinity, and functional properties of the native sago starch after physical and chemical modifications. The results show that physical modification caused greater granule damage than chemical modification. All modification treatments did not alter the type of crystallinity but decreased the relative crystallinity of native starch. New functional groups were formed in chemically modified starches at a wavelength of 1700-1725 cm^-1. The degree of order (DO) and degree of double helix (DD) of the modified starches were also not significantly different from the native sample, except for AHT and OPT, respectively. Physical modification decreased the swelling volume, while chemical modification increased its value and is inversely proportional to solubility. AHT and OPT starches have the best freeze-thaw stability among others, indicating that both starches have the potential to be applied in frozen food.

Physical, Chemical and Biochemical Modification Approaches of Potato (Peel) Constituents for Bio-Based Food Packaging Concepts: A Review

Potatoes are grown in large quantities and are mainly used as food or animal feed. Potato processing generates a large amount of side streams, which are currently low value by-products of the potato processing industry. The utilization of the potato peel side stream and other potato residues is also becoming increasingly important from a sustainability point of view. Individual constituents of potato peel or complete potato tubers can for instance be used for application in other products such as bio-based food packaging. Prior using constituents for specific applications, their properties and characteristics need to be known and understood. This article extensively reviews the scientific literature about physical, chemical, and biochemical modification of potato constituents. Besides short explanations about the modification techniques, extensive summaries of the results from scientific articles are outlined focusing on the main constituents of potatoes, namely potato starch and potato protein. The effects of the different modification techniques are qualitatively interpreted in tables to obtain a condensed overview about the influence of different modification techniques on the potato constituents. Overall, this article provides an up-to-date and comprehensive overview of the possibilities and implications of modifying potato components for potential further valorization in, e.g., bio-based food packaging.

Improvement in Digestion Resistibility of Mandua Starch (Eleusine coracana) after Cross-Linking with Epichlorohydrin

Starch, being a polymer of excessive demand for the development of products of pharmaceutical importance, has been tremendously treated in many ways for improving the desired characteristics such as viscosity, paste clarity, digestibility, swelling, syneresis, and so forth. In the present study, alkali-extracted starch of mandua grains (Eleusine coracana; family Poaceae) was treated with epichlorohydrin for cross-linking and the modified starch was assessed for swelling, solubility, water binding capacity, moisture content, and degree of cross-linking. The digestion resistibility of modified starch was analyzed in simulated gastric fluid (pH 1.2), simulated intestinal fluid (pH 6.8), and simulated colonic fluid (pH 7.4). The structural modifications in treated mandua starch were analyzed by Fourier transform infrared (FTIR) spectroscopy, powder X-ray diffraction (XRD), scanning electron microscopy, thermogravimetric analysis, and C¹³ nuclear magnetic resonance (¹³C NMR). The results of the study reflected the significant modification in mandua starch after treatment with epichlorohydrin (1.0% w/w sdb, solid dry basis). The degree of cross-linking of treated mandua starch was 85.15%, and the swelling capacity of mandua starch changed from 226.51 ± 2.175 to 103.14 ± 1.998% w/w after cross-linking with epichlorohydrin. A remarkable increment in digestion resistibility was observed in modified mandua starch. The XRD pattern and FTIR spectra revealed the presence of resistant starch after chemical modification. The decomposition pattern of modified mandua starch was also different from extracted mandua starch. All the results reflected the effective modification of mandua starch by epichlorohydrin and the formation of resistant starch to a significant content. The treated mandua starch may have the potential in developing various preparations of food, nutraceuticals, and pharmaceuticals.

Effect of Long-Term Potato Starch Retention with Citric Acid on Its Properties

The present study aimed to determine changes in the properties of starch triggered by its long-lasting (1, 2, 4, 7, 10, or 14 days) retention with citric acid (5 g/100 g) at a temperature of 40 °C. The starch citrates obtained under laboratory conditions had a low degree of substitution, as confirmed via NMR and HPSEC analyses. The prolonging time of starch retention with citric acid at 40 °C contributed to its increased esterification degree (0.05–0.11 g/100 g), swelling power (30–38 g/g), and solubility in water (19–35%) as well as to decreased viscosity of the starch pastes. Starch heating with citric acid under the applied laboratory conditions did not affect the course of DSC thermal characteristics of starch pasting. The low-substituted starch citrates exhibited approximately 15% resistance to amylolysis.

Ultrasonication enhanced the multi-scale structural characteristics of rice starch following short-chain fatty acids acylation

Considering the variation of the diffusion character of the three anhydrides, ultrasonication was applied for investigating its impact on the reaction efficiency of the rice starch acylation from three short-chain fatty acids (SCFAs). The current data indicated that the signal peak of the FTIR spectrum at 1720 cm^-1 and additional resonances in the NMR confirmed the occurrence of the acylation reaction onto the starch molecules. More interestingly, this is the first study to reveal that a lower power density ultrasonication improved the reaction efficiencies of acetylation (19%), while a higher power density could lead to a reduced acylation reactivity of propionylation compared to the control one. On the contrary, the reaction efficiency of butyrylation (64%) was significantly enhanced by the ultrasound-assisted treatment with a greater association between reaction efficiency and ultrasonic power density, indicating the importance of the diffusion character for impacting the acylation reactivity among these three anhydrides. The ultrasonic-assisted SCFAs-modified rice starch has a lower peak viscosity and setback value, indicating that the replacement of the acyl groups for OH groups in the starch avoids starch molecules rearrangement. Meanwhile, the rheological properties exhibited that the starch achieved from ultrasonic-assistance significantly reduced the area of the hysteresis curve, suggesting a destroyed gel textural property. Thus, an appropriate ultrasonication but not all could effectively enhance the acylation efficiency and improve starch rheological property.

Effect of Continuous and Discontinuous Microwave-Assisted Heating on Starch-Derived Dietary Fiber Production

Dietary fiber can be obtained by dextrinization, which occurs while heating starch in the presence of acids. During dextrinization, depolymerization, transglycosylation, and repolymerization occur, leading to structural changes responsible for increasing resistance to starch enzymatic digestion. The conventional dextrinization time can be decreased by using microwave-assisted heating. The main objective of this study was to obtain dietary fiber from acidified potato starch using continuous and discontinuous microwave-assisted heating and to investigate the structure and physicochemical properties of the resulting dextrins. Dextrins were characterized by water solubility, dextrose equivalent, and color parameters (L* a* b*). Total dietary fiber content was measured according to the AOAC 2009.01 method. Structural and morphological changes were determined by means of SEM, XRD, DSC, and GC-MS analyses. Microwave-assisted dextrinization of potato starch led to light yellow to brownish products with increased solubility in water and diminished crystallinity and gelatinization enthalpy. Dextrinization products contained glycosidic linkages and branched residues not present in native starch, indicative of its conversion into dietary fiber. Thus, microwave-assisted heating can induce structural changes in potato starch, originating products with a high level of dietary fiber content.

Understanding the multi-scale structure, physicochemical properties and in vitro digestibility of citrate naked barley starch induced by non-thermal plasma

Non-thermal plasma treatment is an emerging and effective starch modification technique. In this paper, plasma pretreatment was used to modify citrate naked barley starch for enhancing the ability of citric acid to access the starch structure. Plasma treatment did not alter the granule morphology and crystalline type of starch, but degraded the starch molecules and caused more short chains. Plasma pretreatment could etch the starch surface and depolymerize the starch molecules, which increased the accessibility of citric acid for uniform hydrolysis in the subsequent esterification reaction. Therefore, plasma pretreatment significantly promoted the structural and physicochemical modification of the citrate starch, including the enhancement of the degree of substitution, the short-range ordered degree and gelatinization temperatures, and the decreases in the molecular weight, long chains of amylopectin and pasting viscosities. Meanwhile, plasma pretreatment improved the efficiency of acid hydrolysis and decreased the enzymatic digestibility, so that it showed a higher resistant starch content in comparison with its corresponding citrate starch. This paper could provide a new insight into the lower digestion rate and improved functional properties of citrate starch.

Impacts of Hydrothermal Treatments on the Morphology, Structural Characteristics, and In Vitro Digestibility of Water Caltrop Starch

The influence of hydrothermal treatments on the structural properties and digestibility of water caltrop starch was investigated. Scanning electron microscopy (SEM) showed some small dents on the surface of starch granules for samples treated with heat moisture treatment (HMT), but not for samples treated with annealing (ANN) which generally showed smoother surfaces. The gelatinization temperature of starch was generally increased by hydrothermal treatments, accompanied by a trend of decreasing breakdown viscosity. These results implied the improvement of thermal and shearing stability, particularly for HMT in comparison to ANN. After being cooked, the native and ANN-modified water caltrop starch granules were essentially burst or destroyed. On the other hand, the margin of starch granules modified by HMT and dual hydrothermal treatments remained clear with some channels inside the starch granules. X-ray diffraction revealed that the crystalline pattern of water caltrop starch changed from the CA-type to the A-type and the relative crystallinity reduced with increasing moisture levels of HMT. Results of ANN-modified water caltrop starch were mostly similar to those of the native one. Moreover, water caltrop starch modified with HMT20 and dual modification contained a pronouncedly higher resistant starch content. These results suggested that HMT, ANN, and dual modification effectively modified the functional properties of water caltrop starch.

Comparison of quercetin and rutin inhibitory influence on Tartary buckwheat starch digestion in vitro and their differences in binding sites with the digestive enzyme

Inhibitory effects of flavonoids on starch digestibility were well known, but the structural mechanism was not clear. This study was focused on the diverse effect of quercetin and rutin on digestibility of Tartary buckwheat starch. Results showed that quercetin and rutin reduced the starch digestion by altering starch structure in bound forms and inhibiting digestive enzyme activity in free forms simultaneously, and quercetin showed a stronger effect than rutin. Molecular docking and saturation transfer difference-nuclear magnetic resonance (STD-NMR) revealed different binding site of rutin from quercetin was due to its hydroxyl and hydrogen on the glycoside structure. Rutin interacted with enzymes mainly by CH and OH on the glycoside structure which induced steric hindrance and restricted the inhibitory effect of quercetin fraction. The glycoside structure weakened inhibition of rutin on digestive enzymes in free forms rather than influence its anti-digestive effects in bound forms with starch.

Preparation and characterization of native and autoclaving-cooling treated Pinellia ternate starch and its impact on gut microbiota

The aim of this study was to investigate and compare the structural and physicochemical properties of native Banxia starch (BXS) and autoclaving-cooling treated Banxia starch (CTBXS) and its related impacts on production of short chain fatty acids (SCFAs) and human gut microbiota by in vitro fecal fermentation. BXS had semicircle to spherical granules, whereas CTBXS exhibited block-shape. According to XRD and TGA, BXS had a C-type crystalline pattern, while CTBXS had a B-type crystalline pattern. CTBXS had better thermal stability than BXS. In addition, BXS exhibited significantly higher solubility and swelling power than CTBXS, and CTBXS had higher content of SDS than BXS. Moreover, BXS and CTBXS could change the composition and abundance of gut microbiota, could also promote the production of SCFAs. This study is beneficial to well understand the in vitro digestion and fecal fermentation behaviors of BXS and CTBXS, and can be developed as a potential functional food with the aim of improving colonic health.

Talipot palm (Corypha umbraculifera L.) a nonconventional source of starch: Effect of citric acid on structural, rheological, thermal properties and in vitro digestibility

Starch from talipot palm trunk (Corypha umbraculifera L.), a new starch source, was treated with different citric acid concentrations (5%, 10%, 20%, and 40% of the dry weight of starch) to produce citrate starch. The influence of citric acid treatment on physicochemical, pasting, structural, thermal, rheological, and digestibility properties of talipot palm starch were studied. A new peak at 1728 cm^-1 was observed in the Fourier-transform infrared spectroscopy (FTIR) spectra of citric acid-treated starches, which confirmed the formation of an ester bond between starch molecule and citric acid. The crystalline pattern of talipot palm starch was unaffected by citric acid treatment, whereas the relative crystallinity decreased from 16.35% to 3.06%. The Rapid Visco Analysis of starch treated with citric acid did not show any characteristic peaks, however, the untreated starch showed a peak viscosity of 3646 cP. The gelatinization parameters decreased with an increase in the degree of substitution, and the enthalpy of gelatinization (ΔH_gel) decreased from 11.19 J/g to 6.37 J/g. The in-vitro digestibility of talipot palm starch was decreased by citric acid treatment, and that of the slowly digestible starch (SDS) and resistant starches (RS) increased significantly (p ≤ 0.05) from 31.71% to 39.43% and 37.55% to 53.38%, respectively.

Using Carboxymethyl Cellulose as the Additive With Enzyme-Catalyzed Carboxylated Starch to Prepare the Film With Enhanced Mechanical and Hydrophobic Properties

Carboxymethyl cellulose, a hydrophobic derivative from cellulose that can be prepared from different biomass, has been widely applied in food, medicine, chemical, and other industries. In this work, carboxymethyl cellulose was used as the additive to improve the hydrophobicity and strength of carboxylated starch film, which is prepared from starch catalyzed by bio-α-amylase. This study investigated the effects of different bio-α-amylase dosages (starch 0.5%, starch 1%) and different activation times (10, 30 min) on starch to prepare the carboxylated starch. The effects of different carboxymethyl cellulose content on the carboxylated starch film were investigated by analysis viscosity, fourier-transform infrared spectroscopy, thermogravimetric analysis, differential scanning calorimetry, x-ray powder diffraction, scanning electron microscope, and contact angle. The results showed that preparing carboxylated starch using activated starch increased the carboxyl content, which could improve the effectiveness of the activated enzyme compared to prolonging the activation time. The carboxyl starch prepared by enzyme catalysis had a lower gelatinization temperature, and enzyme activation destroyed the crystallization area of the starch, thus facilitating the carboxylation reaction. The addition of 15% carboxymethyl cellulose improved the mechanical properties of the prepared film with maximum tensile strength of 44.8 MPa. Carboxymethyl cellulose effectively improved the hydrophobicity of the starch film with the addition amount of 10–30%, while hydrophobic property was stable at 66.8° when the addition amount was exceeded to 35%. In this work, it can be found that carboxymethyl cellulose improve the mechanical and hydrophobic properties of starch film, laying the foundation for the application of carboxylated starch materials.

Effects of ultra-high pressure on the morphological and physicochemical properties of lily starch

In this study, starch extracted from lily bulbs were modified using an ultra-high pressure (UHP) treatment at six different pressure levels (100, 200, 300, 400, 500, and 600 MPa). The effects of UHP treatment on the physicochemical and morphological properties of lily starch were investigated. The morphological observation revealed that UHP treatment led to particle expansion and aggregation. Compared with the native and lily starch treated at 100-500 MPa, the lily starch treated at 600 MPa exhibited almost completely disrupted morphology and a larger particle size, indicating nearly complete gelatinization of the starch. The relative crystallinity of the UHP-treated starch remarkably reduced. Gelatinization temperatures via differential scanning calorimetry decreased with increasing pressure. The rapid viscoanalyzer results revealed that the lily starch treated with UHP at 600 MPa showed low values of peak viscosity, trough viscosity, breakdown, final viscosity, and setback. These results indicated that UHP was an effective physical modification method for lily starch, UHP treatment (600 MPa, 30 min) caused nearly complete gelatinization of lily starch, and lily starch modified using UHP might expand the application of lily in the food field.

Effects on the structure and properties of native corn starch modified by enzymatic debranching (ED), microwave assisted esterification with citric acid (MCAE) and by the dual ED/MCAE treatment

Native corn starch was modified by enzymatic debranching (ED), microwave assisted citric acid esterification (MCAE), and by dual ED/MCAE. The structure and properties of native starch (NS), and the resulting debranched starch (DS), microwave assisted citric acid esterified starch (MCS), and microwave assisted citric acid debranched starch (MCDS) were determined and compared. Both the morphology and crystalline regions of the modified starches were changed by ED and MCAE. ED increased significantly the amylose content and transparency, but decreased the in vitro enzymatic digestibility, freeze thaw stability and relative crystallinity of DS compared to those of NS. MCAE produced a decrease in amylose content, transparency, in vitro enzymatic digestibility, and relative crystallinity, but increased the freeze-thaw stability of MCS compared to NS, and of MCDS compared to DS. The A-type crystalline structure of NS and DS was changed to B-type crystalline structure after MCAE treatment, and a new FTIR characteristic band at 1735 cm^-1 was observed for MCS and MCDS. This work provides insights for producing esterified corn starches by a combined enzyme, microwave and organic acid novel technology.