One-pot fabrication of durable antibacterial cotton fabric coated with silver nanoparticles via carboxymethyl chitosan as a binder and stabilizer

Ecofriendly dual-function cotton fabric with antibacterial and anti-adhesion properties based on modified natural materials

Ecofriendly fabrics with antibacterial and anti-adhesion properties have been attracted an increasing attention in recent years. Herein, natural menthol modified polyacrylate (PMCA) antibacterial adhesion agent was synthesized by esterification and polymerisation while natural pterostilbene-grafted-chitosan (PGC) antibacterial agent was prepared through Mannich reaction. The antibacterial and anti-adhesion cotton fabric was fabricated through durable PMCA dip finishing and then layer-by-layer self-assembly of PGC. The results showed that the antibacterial adhesion rates and antibacterial rates of the dual-function cotton fabric against Staphylococcus aureus and Escherichia coli reached up to 99.9 %. Its antibacterial adhesion rates improved by 36.1 % and 40.1 % in comparison with those of cotton fabric treated by menthol alone. Meanwhile against S. aureus, the dual-function cotton fabrics improved the antibacterial rates by 56.7 % and 36.4 %, respectively, from those of chitosan- and pterostilbene-treated fabrics. Against E. coli, the improvements were 89.4 % and 24.8 %, respectively. After 20 household washings, the dual-function cotton fabric maintained >80 % of its original anti-adhesion and antibacterial rates against both species. The dual-function cotton fabric also possessed safe and excellent wearability.

Green and sustainable fabrication of a durable superhydrophobic cotton fabric with self-cleaning properties

The use of more toxic reagents in the finishing of superhydrophobic cotton fabrics is one of the main factors that limit the application of the fabrics. Therefore, a green and sustainable method for preparing superhydrophobic cotton fabrics is urgently needed. In this study, a cotton fabric was etched with phytic acid (PA), which can be extracted from plants, effectively improving the surface roughness of the fabric. Subsequently, the treated fabric was coated with epoxidized soybean oil (ESO)-derived thermosets and then covered with stearic acid (STA). The finished cotton fabric exhibited excellent superhydrophobic properties, with a water contact angle of 156.3°. The superhydrophobic coatings of the finished cotton fabric endowed the fabric with excellent self-cleaning properties, irrespective of the liquid pollutant or solid dust. In addition, the inherent properties of the finished fabric were largely retained after the modification. Therefore, the finished cotton fabric with excellent self-cleaning properties has great potential for applications in the household and clothing fields.

Effects of UV radiation on natural and synthetic materials

The deleterious effects of solar ultraviolet (UV) radiation on construction materials, especially wood and plastics, and the consequent impacts on their useful lifetimes, are well documented in scientific literature. Any future increase in solar UV radiation and ambient temperature due to climate change will therefore shorten service lifetimes of materials, which will require higher levels of stabilisation or other interventions to maintain their lifetimes at the present levels. The implementation of the Montreal Protocol and its amendments on substances that deplete the ozone layer, controls the solar UV-B radiation received on Earth. This current quadrennial assessment provides a comprehensive update on the deleterious effects of solar UV radiation on the durability of natural and synthetic materials, as well as recent innovations in better stabilising of materials against solar UV radiation-induced damage. Pertinent emerging technologies for wood and plastics used in construction, composite materials used in construction, textile fibres, comfort fabric, and photovoltaic materials, are addressed in detail. Also addressed are the trends in technology designed to increase sustainability via replacing toxic, unsustainable, legacy additives with 'greener' benign substitutes that may indirectly affect the UV stability of the redesigned materials. An emerging class of efficient photostabilisers are the nanoscale particles that include oxide fillers and nanocarbons used in high-performance composites, which provide good UV stability to materials. They also allow the design of UV-shielding fabric materials with impressive UV protection factors. An emerging environmental issue related to the photodegradation of plastics is the generation of ubiquitous micro-scale particles from plastic litter exposed to solar UV radiation.

Durably antibacterial cotton fabrics coated by protamine via Schiff base linkages

The development of antibacterial cotton fabrics with an overall performance is critical but remains challenging. In this study, we propose a facile method to prepare durable antibacterial cotton fabric without significant sacrifices of wearing comfortability. Cotton fabric is firstly oxidated to obtain dialdehyde groups, then treated with PM molecules to establish a PM coating on the fiber surfaces via Schiff base linkages. The resultant cotton fabrics show durably antibacterial activity, realizing high bacterial reduction rates against both E. coli and S. aureus higher than 99.99 %, and offering remarkable durabilities tolerable 50 washing cycles and 500 rubbing times. These fabrics also show reliable safety for human skin that proofed by a series of cytotoxicity tests with positive results. This work demonstrates an example of versatile strategy to impart effective antibacterial function with durable activity to cotton textiles, showing great potential for practical applications in functional textile fields.

Facile Fabrication of Superhydrophobic and Flame-Retardant Coatings on Cotton Fabrics

The hydrophilicity and inherent flammability of cotton textiles severely limit their usage. To solve these drawbacks, a superhydrophobic and flame-retardant (SFR) coating made of chitosan (CH), ammonium polyphosphate (APP), and TiO₂-SiO₂-HMDS composite was applied to cotton fabric using simple layer-by-layer assembly and dip-coating procedures. First, the fabric was alternately immersed in CH and APP water dispersions, and then immersed in TiO₂-SiO₂-HMDS composite to form a CH/APP@TiO₂-SiO₂-HMDS coating on the cotton fabric surface. SEM, EDS, and FTIR were used to analyze the surface morphology, element composition, and functional groups of the cotton fabric, respectively. Vertical burning tests, microscale combustion calorimeter tests, and thermogravimetric analyses were used to evaluate the flammability, combustion behavior, thermal degradation characteristics, and flame-retardant mechanism of this system. When compared to the pristine cotton sample, the deposition of CH and APP enhanced the flame retardancy, residual char, heat release rate, and total heat release of the cotton textiles. The superhydrophobic test results showed that the maximal contact angle of SFR cotton fabric was 153.7°, and possessed excellent superhydrophobicity. Meanwhile, the superhydrophobicity is not lost after 10 laundering cycles or 50 friction cycles. In addition, the UPF value of CH/APP@TiO₂-SiO₂-HMDS cotton was 825.81, demonstrating excellent UV-shielding properties. Such a durable SFR fabric with a facile fabrication process exhibits potential applications for both oil/water separation and flame retardancy.

Antimicrobial Properties of CuO Particles Deposited on a Medical Mask

Medical face masks help to reduce the transmission of pathogens, however, the number of infections caused by antimicrobial-resistant pathogens continues to increase. The aim of this study was to investigate the antimicrobial effect of an experimental medical mask layer coated with copper oxide using an environmentally friendly non-thermal physical vapour deposition approach. Pure CuO nanoparticles were successfully deposited on the middle layer of a face mask. The particles were distributed in different size clusters (starting from less than 100 nm dots going up to about 1 µm cluster-like structures). The CuO clusters did not form uniform films, which could negatively influence airflow during use of the mask. We investigated the antimicrobial properties of the experimental mask layer coated with CuO NPs using 17 clinical and zoonotic strains of gram-negative, gram-positive, spore-forming bacteria and yeasts, during direct and indirect contact with the mask surface. The effectiveness of the coated mask layer depended on the deposition duration of CuO. The optimal time for deposition was 30 min, which ensured a bactericidal effect for both gram-positive and gram-negative bacteria, including antimicrobial-resistant strains, using 150 W power. The CuO NPs had little or no effect on Candida spp. yeasts.

Anti-Mold Protection of Textile Surfaces with Cold Plasma Produced Biocidal Nanocoatings

The permanent anti-mold protection of textile surfaces, particularly those utilized in the manufacture of outdoor sporting goods, is still an issue that requires cutting-edge solutions. This study attempts to obtain antifungal nanocoatings on four selected fabrics used in the production of high-mountain clothing and sleeping bags, and on PET foil as a model substrate, employing the cold plasma technique for this purpose. Three plasma treatment procedures were used to obtain such nanocoatings: plasma-activated graft copolymerization of a biocidal precursor, deposition of a thin-film matrix by plasma-activated graft copolymerization and anchoring biocidal molecules therein, and plasma polymerization of a biocidal precursor. The precursors used represented three important groups of antifungal agents: phenols, amines, and anchored compounds. SEM microscopy and FTIR-ATR spectrometry were used to characterize the produced nanocoatings. For testing antifungal properties, four species of common mold fungi were selected: A. niger, A. fumigatus, A. tenuissima, and P. chrysogenum. It was found that the relatively best nanocoating, both in terms of plasma process performance, durability, and anti-mold activity, is plasma polymerized 2-allylphenol. The obtained results confirm our belief that cold plasma technology is a great tool for modifying the surface of textiles to provide them with antifungal properties.

Bimetallic silver-platinum (AgPt) nanoparticles and chitosan fabricated cotton gauze for enhanced antimicrobial and wound healing applications

Wound healing is a significant clinical and socioeconomic problem that is often affected by microbial infection. Inappropriate monitoring leads to unfavorable concerns for surrounding tissues. Cotton gauzes have been used as low-cost wound dressing material but prolong healing owing to strong adherence and secondary microbial infections. Hence, we prepared the bimetallic (silver and platinum) nanoparticles (AgPt NPs) using citric acid (CA) as a reducing agent and then coated them on chitosan (CS) fabricated cotton gauze (CG) for enhanced antimicrobial and wound healing applications. The synthesis of AgPt NPs was evidenced UV-Visible spectroscopy, FE-TEM, and elemental mapping analysis. The average size of AgPt NPs was 21.48 ± 6.32 nm and spherical in structure. Besides, AgPt NPs showed a hydrodynamic size of 63.64 (d.nm) with a polydispersity index of 0.220 and a zeta potential of -28.1 mV. The FT-IR and XRD analysis demonstrated the functional changes and crystalline properties of AgPt NPs. The antimicrobial efficacy of AgPt NPs was significantly higher than standard antibiotic against bacteria, yeast, and filamentous fungi. Furthermore, the AgPt NPs-CS/CG exhibited a substantial hydrophobic nature with better antimicrobial and antioxidant activity. In addition, pH-dependent Ag and Pt release from the AgPt NPs-CS/CG was determined by ICP-MS analysis. The treatment of AgPt NPs-CS/CG augmented the in vitro wound healing in mouse embryonic fibroblast cells (NIH3T3). Hence, we concluded that AgPt NPs-CS/CG could be used to enhance antimicrobial and wound healing applications.

Cellulosic fabrics modified with polyphosphonium chitosan hydrazone-TiO2-Ag nanobiocomposites for multifunctional applications

Bionanocomposites (BNC1,2) of binary (PPCH-Ag) and ternary (PPCH-TiO₂-Ag) (PPCH = polyphosphonium chitosan-hydrazone) have been synthesized and immobilized on cellulosic fabrics (CFs) using an environmentally friendly single-step in situ methodology. The results of FTIR, TGA, EDX, SEM, and TEM investigations showed that PPCH and its BNCs were successfully formed on the surface layer of fabrics. Moreover, the BNC2-coated cloth exhibited a superhydrophobic behavior as revealed from the values of water contact angle (WCA) 152.1° and slide angle (SA) 8.7°. The cytotoxicity experiments on epithelial cells confirmed the safety of treated fabrics for human cells. The antimicrobial capabilities of the BNCs-treated textiles were greatly enhanced, with a small preference for BNC1-coated fabric, as compared to the native or other treated fabrics. In contrast, the BNC2-coated fabric demonstrated the highest anti-UV protection capabilities as indicated by its great capacity to reduce the UV transmission (UV-A, 2.1 %; UV-B, 1.8 %) as well as its UPF value (49.2). The durability tests revealed the high resistance of BNC2-CF against harsh washing conditions and their acquired functions sustainability up to 20 washing cycles.

Universal Preparation Strategy for Ultradurable Antibacterial Fabrics through Coating an Adhesive Nanosilver Glue

Microbiological protection textile materials played an important role in the battle against the epidemic. However, the traditional active antimicrobial treatment of textiles suffers from narrow textile applicability, low chemical stability, and poor washability. Here, a high-strength adhesive nanosilver glue was synthesized by introducing nontoxic water-soluble polyurethane glue as a protectant. The as-prepared nanosilver glue could adhere firmly to the fiber surfaces by forming a flexible polymer film and could encapsulate nanosilver inside the glue. The as-prepared nanosilver had a torispherical structure with diameter of ~22 nm, zeta potential of −42.7 mV, and good dispersibility in water, and it could be stored for one year. Further studies indicated that the nanosilver glue had wide applicability to the main fabric species, such as cotton and polyester fabric, surgical mask, latex paint, and wood paint. The antimicrobial cotton and polyester fabrics were prepared by a simple impregnation–padding–baking process. The corresponding antimicrobial activity was positively correlated with nanosilver content. The treated fabrics (500 mg/kg) exhibited ultrahigh washing resistance (maintained over 99% antibacterial rates for 100 times of standard washing) and wear resistance (99% antibacterial rates for 8000 times of standard wearing), equivalent breathability to untreated fabric, improved mechanical properties, and good flexibility, demonstrating a potential in cleanable and reusable microbiological protection textiles.

Durable antibacterial cotton fabric fabricated using a "self-created" mist polymerization device

There are two major problems associated with the use of antibacterial cotton fabric. The durability of the fabric is poor, and the inherent properties of the fabric deteriorate following the execution of the finishing processes. These limit the application of antibacterial fabric. We first treated the cotton fabric with acryloyl chloride (AC) molecules to make the surface of the fabric rich in carbon‑carbon double (C=C) bonds. Following this, the [2-(methacryloyloxy)ethyl]dimethyl-(3-sulfopropyl)ammonium hydroxide (DMES) monomer was polymerized with the CC bonds on the fabric following the "grafting through" method. As a result, the cotton fabric was successfully grafted with the poly[2-(methacryloyloxy)ethyl]dimethyl-(3-sulfopropyl)ammonium hydroxide (PDMES), exploiting covalent bonds. The finished fabric exhibited excellent antibacterial effects. The bacterial reduction (BR) rates of the finished fabric against E. coli and S. aureus were greater than 99.0 %. Even after 50 washing cycles, the BR rates of the finished fabric against E. coli and S. aureus were greater than 96.0 %. In addition, the use of the "self-created" mist polymerization technology ensured that the inherent properties of the finished fabric were retained to a large extent. Therefore, the antibacterial cotton fabric prepared following this method can be potentially used for the fabrication of industrial and household textiles.

Physical and Mechanical Characterization of a Functionalized Cotton Fabric with Nanocomposite Based on Silver Nanoparticles and Carboxymethyl Chitosan Using Green Chemistry

Cotton is the most widely used natural fiber for textiles but its innate capacity to absorb moisture, retain oxygen, and high specific surface area make it more prone to microbial contamination, becoming an appropriate medium for the growth of bacteria and fungi. In recent years, the incorporation of silver nanoparticles in textile products has been widely used due to their broad-spectrum antibacterial activity and low toxicity towards mammalian cells. The aim of the current study is to synthesize and characterize a nanocomposite based on silver nanoparticles and carboxymethyl chitosan (AgNPs-CMC), which was utilized to provide a functional finish to cotton fabric. The scanning electron microscope (SEM) to produce a scanning transmission electron microscope (STEM) image showed that the nanocomposite presents AgNPs with a 5–20 nm size. The X-ray diffraction (XRD) analysis confirmed the presence of silver nanoparticles. The concentration of silver in the functionalized fabric was evaluated by inductively coupled plasma optical emission spectrometry (ICP-OES), which reported an average concentration of 13.5 mg of silver per kg of functionalized fabric. SEM showed that silver nanoparticles present a uniform distribution on the surface of the functionalized cotton fabric fibers. On the other hand, by infrared spectroscopy, it was observed that the functionalized fabric variation (compared to control) had a displaced peak of intensity at 1594.32 cm−1, corresponding to carboxylate anions. Similarly, Raman spectroscopy showed an intense peak at 1592.84 cm−1, which corresponds to the primary amino group of carboxymethyl chitosan, and a peak at 1371.5 cm−1 corresponding to the carboxylic anions. Finally, the physical and mechanical tests of tensile strength and color index of the functional fabric reported that it was no different (p ˃ 0.05) than the control fabric. Our results demonstrate that we have obtained an improved functionalized cotton fabric using green chemistry that does not alter intrinsic properties of the fabric and has the potential to be utilized in the manufacturing of hospital garments.

Fabrication of Silver Nanoparticles Using Cordyline fruticosa L. Leave Extract Endowing Silk Fibroin Modified Viscose Fabric with Durable Antibacterial Property

The current work presented a green synthetic route for the fabrication of silver nanoparticles obtained from aqueous solutions of silver nitrate using Cordyline fruticosa L. leaf extract (Col) as a reducing and capping agent for the first time. The bio-synthesized silver nanoparticles (AgCol) were investigated using UV-visible spectroscopy (UV-vis), transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and thermal gravimetric analysis (TGA). The obtained data demonstrated that AgCol in spherical shape with an average size of 28.5 nm were highly crystalline and well capped by phytocompounds from the Col extract. Moreover, the bio-synthesized AgCol also exhibited the effective antibacterial activities against six pathogenic bacteria, including Escherichia coli (E. coli), Pseudomonas aeruginosa (P. aeruginosa), Salmonella enterica (S. enterica), Staphylococcus aureus (S. aureus), Bacillus cereus (B. cereus) and Enterococcus faecalis (E. faecalis). The AgCol were applied as an antibacterial finishing agent for viscose fabric using a pad-dry curing technique. The AgCol-treated viscose fabrics exhibited a good synergistic antimicrobial activity against E. coli and S. aureus bacteria. Furthermore, the silk fibroin regenerated from Bombyx mori cocoon waste was utilized as an ecofriendly binder for the immobilization of AgCol on the viscose fabric. Thus, the antimicrobial efficacy of the AgCol and fibroin modified viscose fabric still reached 99.99% against the tested bacteria, even after 30 washing cycles. The colorimetric property, morphology, elemental composition, and distribution of AgCol on the treated fabrics were investigated using several analysis tools, including colorimetry, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), atomic absorption spectroscopy (AAS), Kjeldahl, and FTIR. Because of the excellent antimicrobial efficiency and laundering durability, as well as the green synthesis method, the AgCol and fibroin modified viscose fabric could be utilized as an antibacterial material in sportswear and medical textile applications.

Highly effective antibacterial AgNPs@hinokitiol grafted chitosan for construction of durable antibacterial fabrics

It has become a growing trend for the development of antibacterial fabrics of high effectiveness and durability without affecting their intrinsic wearability. Herein, a new antibacterial agent (AgNPs@HTCS) was prepared by grafting of natural hinokitiol (HT) onto chitosan (CS) via Mannich reaction, and then coordination of nano‑silver (AgNPs) via in-situ reduction. AgNPs@HTCS was applied for the construction of durable antibacterial fabrics. Results showed that the minimum inhibitory concentration values of AgNPs@HTCS against S. aureus and E. coli reached 1.74 μg/mL and 5.28 μg/mL, respectively. AgNPs@HTCS solution at very low concentration of 0.25 g/L could impart antibacterial ratio above 99% against S. aureus and E. coli for cotton, silk, linen, and polyester fabrics. After 25 repeated washing recycles, the antibacterial ratios of the treated fabrics still retained higher than 95%. Compared with the untreated fabric, the handle, whiteness, and breaking strength of the antibacterial fabric had little change, and even the hydrophilcity improved to certain extent. The antibacterial fabric treated by AgNPs@HTCS was safe and had great application potential.

One-Pot Synthesis and in Silico Molecular Docking Studies of Arylselanyl Hydrazides as Potential Antituberculosis Agents

The present study reports a simple two-step method for the synthesis of arylselanyl hydrazide derivatives using hypophosphorous acid and polyethylene glycol (H₃ PO₂ /PEG-400) as an alternative reducing system and hydrazine hydrate (NH₂ NH₂ ⋅xH₂ O/50-60 %). This single-vessel procedure was employed with methyl acrylate 2a and methyl bromoacetate 2b using diaryl diselenides to generate the nucleophile species to produce, respectively, 3-(arylselanyl)propane-hydrazides 4a-e and 2-(arylselanyl)acetohydrazides 5a-e with good yields by accelerating the reduction of -Se-Se- bond, when compared to available methods. The synthesized molecules are structurally similar to the isoniazid (INH). Therefore, we perform in silico molecular docking studies, using the lactoperoxidase enzyme, in order to verify whether the INH Se derivatives could interact in a similar way to INH at the active site of the mammalian enzyme. The in silico results indicated a similar type of interaction of the arylselanyl hydrazide derivatives with that of INH. In view of the similar in silico interaction of the selenium derivatives of INH, the arylselanyl hydrazide derivatives reported here should be tested against Mycobacterium tuberculosis in vitro.

Polysaccharides and Metal Nanoparticles for Functional Textiles: A Review

Nanotechnology is a powerful tool for engineering functional materials that has the potential to transform textiles into high-performance, value-added products. In recent years, there has been considerable interest in the development of functional textiles using metal nanoparticles (MNPs). The incorporation of MNPs in textiles allows for the obtention of multifunctional properties, such as ultraviolet (UV) protection, self-cleaning, and electrical conductivity, as well as antimicrobial, antistatic, antiwrinkle, and flame retardant properties, without compromising the inherent characteristics of the textile. Environmental sustainability is also one of the main motivations in development and innovation in the textile industry. Thus, the synthesis of MNPs using ecofriendly sources, such as polysaccharides, is of high importance. The main functions of polysaccharides in these processes are the reduction and stabilization of MNPs, as well as the adhesion of MNPs onto fabrics. This review covers the major research attempts to obtain textiles with different functional properties using polysaccharides and MNPs. The main polysaccharides reported include chitosan, alginate, starch, cyclodextrins, and cellulose, with silver, zinc, copper, and titanium being the most explored MNPs. The potential applications of these functionalized textiles are also reported, and they include healthcare (wound dressing, drug release), protection (antimicrobial activity, UV protection, flame retardant), and environmental remediation (catalysts).

Applications of Nanotechnology in Smart Textile Industry: A Critical Review

•

Current trends of using nanotechnology in textile industries.

•

Nanotechnology-driven techniques for fabrication and modification of textile fibers.

•

Wearable nanotechnology for energy storage, sensing, drug release, optics, electronics and photonics.

•

Environmental concerns associated with nanotechnology processed textiles.

Background

In recent years, nanotechnology has been playing an important role in designing smart fabrics. Nanomaterials have been employed to introduce in a sustainable manner, antimicrobial, ultraviolet resistant, electrically conductive, optical, hydrophobic and flame-retardant properties into textiles and garments. Nanomaterial based smart devices are now also being integrated with the textiles so as to perform various functions such as energy harvesting and storage, sensing, drug release and optics. These advancements have found wide applications in the fashion industry and are being developed for wider use in defence, healthcare and on-body energy harnessing applications.

Aim of review

The objective of this work is to provide an insight into the current trends of using nanotechnology in the modern textile industries and to inspire and anticipate further research in this field. This review provides an overview of the most current advances concerning on-body electronics research and the wonders which could be realized by nanomaterials in modern textiles in terms of total energy reliance on our clothes.

Key scientific concepts of review

The work underlines the various methods and techniques for the functionalization of nanomaterials and their integration into textiles with an emphasis on cost-effectiveness, comfort, wearability, energy conversion efficiency and eco-sustainability. The most recent trends of developing various nanogenerators, supercapacitors and photoelectronic devices on the fabric are highlighted, with special emphasis on the efficiency and wearability of the textile. The potential nanotoxicity associated with the processed textiles due to the tendency of these nanomaterials to leach into the environment along with possible remediation measures are also discussed. Finally, the future outlook regarding progress in the integration of smart nano-devices on textile fabrics is provided.

A multifunctional green antibacterial rapid hemostasis composite wound dressing for wound healing

Rapid hemostasis and antibacterial properties are essential for novel wound dressings to promote wound healing. In particular, timely and rapid hemostasis could be of benefit to reduce the mortality caused by excessive bleeding loss. Herein, we present a novel strategy of combining electrospinning technology with post-modification technology to prepare a multifunctional wound dressing, cellulose diacetate-based composite wound dressing (CDCE), with rapid hemostasis and antibacterial activity. It is interesting that the CDCE wound dressing had superhydrophilicity, high water absorption, and strong absorbing capacity, which could eliminate the exudate around the wound in a timely manner and further promote rapid hemostasis. Additionally, its excellent antibacterial properties could inhibit severe infection in the wound and accelerate wound healing. Based on these advantages, the novel CDCE wound dressing could promote wound contraction and further accelerate wound healing compared with the common traditional wound dressing gauze. Taken together, the multifunctional CDCE wound dressing has high potential for clinical application in the future.

Green synthesis of antibacterial and cytotoxic silver nanoparticles by Piper nigrum seed extract and development of antibacterial silver based chitosan nanocomposite

In the present study, we have used seed extract of P. nigrum as an effective reducing agent for the synthesis of silver nanoparticles (Ag NPs) and silver based chitosan nanocomposite (Ag/CS NC). The silver nanoparticles were characterized by UV-Vis spectroscopy, X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM) and Fourier transform infrared spectroscopy (FTIR). The appearance of a surface plasmon resonance (SPR) peak located at 430 nm reveals the formation of silver nanoparticles. The TEM analysis indicates that the attained silver nanoparticles were mostly in spherical shapes with sizes ranging between 15 and 38 nm. The high resolution liquid chromatography with mass spectroscopy (HR-LCMS) analysis was performed to screen the phytochemical constituents of P. nigrum seed extract. The silver nanoparticles synthesized by P. nigrum seed extract exhibited effective antibacterial activity against Bacillus subtilis (B. subtilis) and Escherichia coli (E. coli). In addition, the silver nanoparticles showed potent cytotoxicity against hazardous human cancer cell lines MDA-MB-231, PANC-1, SKOV-3, PC-3 and Hela. The observation of bright spots in the TEM dark field images represents the presence of Ag in CS suspension. Besides, the Ag/CS NC coated cotton fabric substantially showed remarkable antibacterial activity against B. subtilis and E. coli.

Chitosan Natural Polymer Material for Improving Antibacterial Properties of Textiles

In recent years, the textile industry has been seeking to develop innovative products. It is a good choice to organically combine materials with superior functional characteristics and commercial textiles to form products with excellent performance. In particular, textiles made of biological functional materials are often beneficial to human health, which is an interesting research direction. As a biopolymer material, chitosan has the advantages of strong availability, low cost, excellent safety, outstanding performance, etc., particularly the antibacterial property, and has broad application prospects in the textile field. This review provides an overview of the latest literature and summarizes recent innovations and state-of-the-art technologies that can add value to textiles. To this end, preparation of chitosan fiber, synthesis of chitosan nanofiber, antibacterial activity of chitosan fiber, antibacterial activity of chitosan nanofiber, etc., will be discussed. Furthermore, the challenges and prospects of chitosan-based materials used in textiles are evaluated. Importantly, this review can not only help researchers understand the development status of antibacterial textiles, but also help researchers discover and solve problems in this field through comparative reading.

Unique "posture" of rose Bengal for fabricating personal protective equipment with enhanced daylight-induced biocidal efficiency

The aggregation-caused self-quenching of photosensitizers (PS), especially on a solid substrate, has highly limited their photo-induced biocidal efficiency in practical applications. Here, we designed a unique "posture" of rose Bengal (RB) on cotton-based super-adsorptive fibrous equipment, with RB being separately captured in the mesopores of porous organic polymers (POPs). The resultant daylight-induced biocidal cotton fabric with enhanced efficiency was named as DBwEE-Cotton. The enhanced biocidal activity of the DBwEE-Cotton was achieved based on two mechanisms: (1) the separation of RB in mesopores on the fabric avoids the aggregation-caused self-quenching; and (2) other than singlet oxygen generation, RB is forced to undergo type I photoreaction by surrounding the RB with massive amounts of good hydrogen donors (i.e., POP) under daylight irradiation. Given the enhanced production efficiency of reactive oxygen species by the DBwEE-Cotton, 99.9999% of E. coli and L. innocua bacteria were killed within 20 min of daylight exposure. The DBwEE-Cotton also presents excellent wash and light durability with no biocidal function loss. The development of DBwEE-Cotton provides a facile strategy of avoiding aggregation-caused self-quenching and modulating photoreactions of PS on a flexible substrate, which may guide the design of novel personal protective equipment (PPE) integrated with improved biocidal efficiency, wearability, and repeated and long-term applicability for protecting people from lethal infectious diseases.

Cellulose nanocrystal assisted trace silver nitrate to synthesize green silver nanocomposites with antibacterial activity

Cellulose nanocrystals (CNCs) with silver nanoparticles (AgNPs) are used for applications ranging from chemical catalysis to environmental remediation, and generation of smart electronics and biological medicine such as antibacterial agents. To reduce the synthesis cost of AgNPs and environmental pollution, microwave-assisted generation of AgNPs on the CNC surface (AgNPs@CNC) has been found to be useful, because microwave reaction has the advantages of simple reaction conditions, short reaction time and high reaction efficiency. The silver ions (Ag⁺) could be added to the CNC suspension and placed in the microwave reactor for a few minutes to produce AgNPs. AgNP generation was affected by factors such as the concentrations of Ag⁺ and CNC, and the power of the microwave, as well as the time of reaction. In this study, we used trace amounts of AgNO₃ to rapidly synthesize AgNPs using a green microwave-based method instead of Tollen's reagent, and the antibacterial activity of the T1 sample showed that only using 0.03 mM (∼0.01 wt%) AgNO₃ to synthesize AgNPs@CNC could achieve good antibacterial properties.

Cellulose nanocrystals (CNCs) with silver nanoparticles (AgNPs) are used for applications ranging from chemical catalysis to environmental remediation, and generation of smart electronics and biological medicine such as antibacterial agents.

In situ microwave heating fabrication of copper nanoparticles inside cotton fiber using pressurization in immiscible liquids with raw material solutions

We developed a method for in situ fabrication of copper nanoparticles inside cotton fibers. Copper nanoparticles can be fabricated mainly in the central part of the fiber by absorbing a raw material solution and by applying microwave heating in a state where the raw material solution is pressed with immiscible liquids. Surface SEM images and cross-sectional EDS mapping for the fabricated fibers clarified that copper nanoparticles fabricated on the cotton surface were suppressed considerably more by the hydrophobic raw material solution than by the hydrophilic raw material solution. These cotton fibers containing copper nanoparticles were found to have antiviral properties against the influenza A virus.

Copper nanoparticles were created inside of cotton fibers by pressuring immiscible liquids against raw material solutions and applying microwave heating.

An Updated Review on Silver Nanoparticles in Biomedicine

Silver nanoparticles (AgNPs) represent one of the most explored categories of nanomaterials for new and improved biomaterials and biotechnologies, with impressive use in the pharmaceutical and cosmetic industry, anti-infective therapy and wound care, food and the textile industry. Their extensive and versatile applicability relies on the genuine and easy-tunable properties of nanosilver, including remarkable physicochemical behavior, exceptional antimicrobial efficiency, anti-inflammatory action and antitumor activity. Besides commercially available and clinically safe AgNPs-based products, a substantial number of recent studies assessed the applicability of nanosilver as therapeutic agents in augmented and alternative strategies for cancer therapy, sensing and diagnosis platforms, restorative and regenerative biomaterials. Given the beneficial interactions of AgNPs with living structures and their nontoxic effects on healthy human cells, they represent an accurate candidate for various biomedical products. In the present review, the most important and recent applications of AgNPs in biomedical products and biomedicine are considered.

Antibacterial cotton fabrics via immobilizing silver phosphate nanoparticles onto the chitosan nanofiber coating

Development of chitosan nanofiber (CNF)/nano‑silver phosphate (Ag3PO4) coatings is reported for the fabrication of antibacterial cotton fabrics. The surface morphology and chemical composition were evaluated by scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS), respectively. SEM results revealed that Ag3PO4 have formed micron-scale clusters and were not completely deposited on the fabric's surface whereas CNFs properly coated the fabric. However, once the hybrid of CNFs and Ag3PO4 was utilized, nanoparticles were better deposited on the fabric. The porous and nano-fibrous structure of CNFs provided an ideal substrate to which nanoparticles tightly adhered. The antibacterial activity of the as-synthesized Ag3PO4 nanoparticles was demonstrated by measuring the minimum inhibitory concentration (MIC). Moreover, the antibacterial property of the coated fabrics was demonstrated by colony counting method and zone of inhibition (ZOI). The bacterial adhesion reductions for CNF/Ag3PO4 coated fabrics were obtained as 100 and 99.8% against S. aureus and E. coli, respectively. Moreover, ZOI was highly increased in the case of the hybrid coating. The results demonstrated the promising potential of CNF/Ag3PO4 coatings for the fabrication of antibacterial cotton fabrics to be used as antibacterial garments for clinical environments.

Preparation and antimicrobial activity of ZnO-NPs coated cotton/starch and their functionalized ZnO-Ag/cotton and Zn(II) curcumin/cotton materials

ZnO-NPs coated cotton or starched cotton fibers were successfully prepared via ultrasound irradiation. Different concentrations of soluble corn starch (1–3 starch wt.%) were used to stabilize ZnO-NPs onto the surface of cotton fabrics as entrapped species. The use of none-toxic biocompatible starch has improved the adhesion properties of the cotton fibers towards ZnO-NPs. This also enhanced the durability of ZnO-NPs onto the cotton fabrics and decreased their leaching from the surface of cotton fabrics. When 3 starch wt.% solution was used, deposition of ZnO-NP increased by 53% after 10 washing cycles. The antibacterial activity against Staphylococcus aureus and Escherichia coli increased by 50 and 21.5%, respectively. Functionalization of ZnO coated cotton with silver nanoparticles (Ag-NPs) and curcumin results in formation of ZnO-Ag/cotton and Zn(II) curcumin/cotton composites. The functionalized nanocomposites ZnO-Ag coated cotton material showed a synergistic antimicrobial behavior than that of individual ZnO/cotton material. The Zn(II) curcumin complex coated cotton showed higher antibacterial activities against both Staphylococcus aureus (Gram-positive) and Escherichia coli (Gram-negative) bacteria than that of the ZnO/cotton material.

Ultrafine Silver Nanoparticles Embedded in Cyclodextrin Metal-Organic Frameworks with GRGDS Functionalization to Promote Antibacterial and Wound Healing Application

The challenge of bacterial infection increases the risk of mortality and morbidity in acute and chronic wound healing. Silver nanoparticles (Ag NPs) are a promising new version of conventional antibacterial nanosystem to fight against the bacterial resistance in concern of the drug discovery void. However, there are several challenges in controlling the size and colloidal stability of Ag NPs, which readily aggregate or coalesce in both solid and aqueous state. In this study, a template-guided synthesis of ultrafine Ag NPs of around 2 nm using water-soluble and biocompatible γ-cyclodextrin metal-organic frameworks (CD-MOFs) is reported. The CD-MOF based synthetic strategy integrates AgNO₃ reduction and Ag NPs immobilization in one pot achieving dual functions of reduced particle size and enhanced stability. Meanwhile, the synthesized Ag NPs are easily dispersible in aqueous media and exhibit effective bacterial inhibition. The surface modification of cross-linked CD-MOF particles with GRGDS peptide boosts the hemostatic effect that further enhances wound healing in synergy with the antibacterial effect. Hence, the strategy of ultrafine Ag NPs synthesis and immobilization in CD-MOFs together with GRGDS modification holds promising potential for the rational design of effective wound healing devices.

A Surface Dielectric Barrier Discharge Plasma for Preparing Cotton-Fabric-Supported Silver Nanoparticles

Cotton-fabric-supported silver nanoparticles (Ag NPs) have aroused great attention due to their remarkable physical and chemical properties and excellent broad-spectrum antibacterial performance.In this work, a surface dielectric barrier discharge (DBD) plasma method is developed and employed to prepare cotton fabric supported Ag NPs (Ag/cotton) for the first time. UV-Vis and X-ray photoelectron spectroscopy (XPS) results confirm the formation of Ag NPs. TEM images show that the size of Ag NPs is in the range 4.8-5.3 nm. Heat-sensitive cotton fabrics are not destroyed by surface DBD plasma according to FTIR and XRDresults. Wash fastness of the Ag/cotton samples is investigated using ultrasonic treatment for 30 min and it is shown that the Ag NPs possess good adhesion to the cotton fabric according to UV-Vis spectra. Antibacterial activity of the Ag/cotton samples shows that obvious bacteriostasis loops are observed around the samples with the appearance of both Gram-negative bacterium Escherichia coli (E. coli) and Gram-positive bacterium Bacillus subtilis (B. subtilis). The average diameter of the bacteriostasis loops against both E. coli and B. subtilis becomes larger with an increasing silver loading amount.This work provides a universal, fast, simple, and environmentally-friendly cold plasma method for synthesizing Ag NPs on heat-sensitive materials at atmospheric pressure.

A Novel Coloration of Polyester Fabric through Green Silver Nanoparticles (G-AgNPs@PET)

This paper reports a novel route for the coloration of polyester fabric with green synthesized silver nanoparticles (G-AgNPs@PET) using chitosan as a natural eco-friendly reductant. The formation of AgNPs was confirmed by UV-visible spectroscopy. The morphologies and average particles size of G-AgNPs was investigated by transmission electron microscope (TEM) analysis. The uniform deposition of G-AgNPs on the PET fabric surface was confirmed with scanning electron microscopy (SEM) and Fourier transform infrared (FT-IR) spectroscopy. The thermal properties were investigated using a thermogravimetric analyzer (TGA). The coloration and fastness properties of fabric were found to be significantly improved, a result related to the surface plasmon resonance of G-AgNPs. The antibacterial properties of fabric were also found to be excellent as more than 80% bacterial reduction was noticed even after 10 washing cycles. Overall, the proposed coating process using green nanoparticles can contribute to low-cost production of sustainable textiles.

Structure and properties of carboxymethyl cotton fabric loaded by reduced graphene oxide

Cotton fiber is a natural polysaccharide material with excellent properties, which is widely used in textile industry. However, the poor ultraviolet (UV) protection and electrical conductivity limit its application in other fields. In this study, reduced graphene oxide (rGO) loaded carboxymethyl cotton fabrics were prepared by layer-by-layer (LBL) self-assembly technique. The structure and surface morphology of the fabrics were studied by K/S value, scanning electron microscopy (SEM), and Fourier transform infrared spectroscopy (FTIR). Furthermore, the electrical conductivity, thermal properties, light absorption properties and UV protection properties of rGO-loaded carboxymethyl cotton fabrics were also studied. The results indicated that rGO-loaded fabrics possessed excellent electrical conductivity, UV protection properties and high light absorption. In addition, washing durability of rGO-loaded carboxymethyl cotton fabric is very good. This technique provides a simple method for people to prepare multifunctional cotton fabrics.

Comparisons of the restoring and reinforcement effects of carboxymethyl chitosan-silk fibroin (Bombyx Mori/Antheraea Yamamai/Tussah) on aged historic silk

This work presents the results of the reinforcement effects of regenerated silk fibroin solutions (SF) of Bombyx-Mori, Antheraea-Yamamai and Tussah on aged historic silk. Furthermore, Carboxymethyl-chitosan (CMC) was utilized as reinforcement and antibacterial filler to further improving the mechanical properties and antibacterial effects. To clarify the rationale behind this process, comprehensive characterization was applied, and a speculative explanation was provided. The results showed that Bombyx-mori and Tussah have better restoring effects than Antheraea-yamamai. CMC has good compatibility to the SF, and the addition of CMC has significantly contributed to the improvement the mechanical properties and thermal stability of the restored silk, which is due to the formation of chemical bonding, strong hydrogen bonding and the construction of polymer network structure. The enhancement of crystallinity and reduction of β-turns structure indicate that the micro-defects in the crystallization zone of the aged silk has been restored, and the ordered arrangement in the long-range ordered structure has been improved within a certain range. It was found that the CMC acted as antifungal agents when introduced on the aged historic silk, reducing the growth of Aspergillus niger, Aspergillus flavus and Paecilomyces variotii to a certain extent, which were commonly found in storage areas of libraries.