Construction of blood compatible chitin/graphene oxide composite aerogel beads for the adsorption of bilirubin

Preparing high-performance microspheres based on the chitosan-assisted dispersion of reduced graphene oxide in aqueous solution for bilirubin removal

The removal of excess bilirubin from blood is of great clinical importance. Reduced graphene oxide (rGO) is often used to efficiently remove bilirubin. However, thin rGO pieces tend to aggregate in the aqueous phase because they are hydrophobic. In this context, we propose an effective strategy based on the chitosan-assisted (CS-assisted) dispersion of rGO to produce high-performance bilirubin-adsorbing microspheres. CS possesses a hydrophobic CH structure, which offers strong hydrophobic interactions with rGO that assist its dispersion, and the large number of hydrophilic sites of CS increases the hydrophilicity of rGO. CS serves as a dispersant in a surfactant-like manner to achieve a homogeneous and stable CS/rGO dispersion by simply and gently stirring CS and rGO in a LiOH/KOH/urea/H2O system. Subsequently, CS/rGO hybrid microspheres were prepared by emulsification. CS ensures blood compatibility as a base material, and the entrapped rGO contributes to mechanical strength and a high adsorption capacity. The CS/rGO microspheres exhibited a high bilirubin adsorption capacity (215.56 mg/g), which is significantly higher than those of the rGO and CS microspheres. The determined mass-transfer factors revealed that the rich pores of the CS/rGO microspheres promote mass transfer during bilirubin adsorption (equilibrium is almost achieved within 30 min). The CS/rGO microspheres are promising candidates for bilirubin removal owing to a combination of high strength, blood compatibility, and high adsorption capacity.

Novel hemoperfusion adsorbents based on collagen for efficient bilirubin removal - A thought from yellow skin of patients with hyperbilirubinemia

Hemoperfusion is a well-developed method for removing bilirubin from patients with hyperbilirubinemia. The performance of adsorbents is crucial during the process. However, most adsorbents used for bilirubin removal are not suitable for clinical applications, because they either have poor adsorption performance or limited biocompatibility. Patients with hyperbilirubinemia usually have distinctive yellow skin, indicating that collagen, a primary component of the skin, may be an effective material for absorbing bilirubin from the blood. Based on this idea, we designed and synthesized collagen (Col) and collagen-polyethyleneimine (Col-PEI) microspheres and employed them as hemoperfusion adsorbents for bilirubin removal. The microspheres have an efficient adsorption rate, higher bilirubin adsorption capacity, and competitive adsorption of bilirubin in the bilirubin/bovine serum albumin (BSA) solution. The maximum adsorption capacities of Col and Col-PEI microspheres for bilirubin are 150.2 mg/g and 258.4 mg/g, respectively, which are higher than those of most traditional polymer microspheres. Additionally, the microspheres exhibit excellent blood compatibility originating from collagen. Our study provides a new collagen-based strategy for the hemoperfusion treatment of hyperbilirubinemia.

Graphene-Based Aerogels for Biomedical Application

Aerogels are three-dimensional solid networks with incredibly low densities, high porosity, and large specific surface areas. These aerogels have both nanoscale and macroscopic interior structures. Combined with graphene, the aerogels show improved mechanical strength, electrical conductivity, surface area, and adsorption capacity, making them ideal for various biomedical applications. The graphene aerogel has a high drug-loading capacity due to its large surface area, and the porous structure enables controlled drug release over time. The presence of graphene makes it a suitable material for wound dressings, blood coagulation, and bilirubin adsorption. Additionally, graphene's conductivity can help in the electrical stimulation of cells for improved tissue regeneration, and it is also appropriate for biosensors. In this review, we discuss the preparation and advantages of graphene-based aerogels in wound dressings, drug delivery systems, bone regeneration, and biosensors.

Metal-organic framework (UiO-66 and UiO-66-NH2)-based adsorbents for bilirubin removal used in hemoperfusion

Excessive accumulation of bilirubin in patients with hyperbilirubinemia can lead to tissue and organ damage and neurological diseases, and is even life-threatening in severe cases. Hemoperfusion is an effective method for removing bilirubin, but clinically used hemoperfusion adsorbents have unsatisfactory adsorption capacity and kinetics. In order to obtain a safe and efficient bilirubin adsorbent, Zr-based Metal-Organic Framework (MOF) material UiO-66 with high specific surface area and aqueous medium stability was prepared and modified with varying degrees of amination to improve its adsorption capacity. According to adsorption experiments in aqueous solution and simulated plasma, it was confirmed that the unsaturated coordinated zirconium in UiO-66 can effectively induce the aggregation and precipitation of free bilirubin unbound to albumin and the amino group on UiO-66-NH2 has a strong affinity for albumin bound bilirubin. The adsorption effect of UiO-66-NH2 with a high degree of amino modification is significantly stronger than that of UiO-66-NH2 with a low degree of modification. In simulated plasma with a bilirubin concentration of 40 mg dL-1, the adsorption capacities of UiO-66 and UiO-66-NH2-1.9 can reach 69.08 mg g-1 and 81.13 mg g-1. The adsorption isotherm fitting and adsorption kinetics fitting results also show that UiO-66 and UiO-66-NH2 are good adsorbents for bilirubin. In dynamic adsorption, the adsorbents also showed good performance and did not affect the protein in the plasma. The hemolysis test, coagulation time test, and cytotoxicity test confirmed that the bilirubin adsorbents based on UiO-66 and UiO-66-NH2 have good blood compatibility and biocompatibility. This study provides new ideas for the development of a novel bilirubin adsorbent and a theoretical basis for the study of bilirubin adsorption mechanisms.

Heparin-Mimetic Chitooligosaccharides-Based Monoliths Obtained from C/W Emulsions: Hemocompatibility and Toxin Removal Ability

Hemoperfusion (HP) is one of the most prominent therapies for treating uremia, hyperbilirubinemia, and acute drug toxicity. The comprehensive performance of currently used porous HP adsorbents needs to be improved due to the impediment to their synthesis strategy. Herein, green carbon dioxide-in-water high internal phase emulsions (C/W HIPEs) were utilized and emulsified with poly(vinyl alcohol) (PVA) for the formation of a heparin-mimetic chitosan oligosaccharides/poly(acrylamide-co-sodium 4-styrenesulfonate) [COS/P(AM-co-SSS)] monolith, which exhibited good mechanical properties, stable swelling performance, hydrophilic properties, anticoagulant effect, and low hemolysis. It showed a strong toxin adsorption capacity (415.2 mg/g for creatinine, 199.3 mg/g for urea, 279.5 mg/g for bilirubin, and 160 mg/g for tetracycline). The adsorption process of porous COS/P(AM-co-SSS) followed the pseudo-second-order kinetic and Langmuir isotherm models. Moreover, the porous materials had a strong electrostatic force on creatinine. The removal of creatinine by simulated in vitro blood perfusion was 80.2% within 30 min. This work provides a green preparation strategy for developing novel HP materials, highlighting their potential application value in blood and environmental purification.

The antioxidant, anti-angiogenic, and anticancer impact of chitosan-coated herniarin-graphene oxide nanoparticles (CHG-NPs)

Background

Herniarin, a simple coumarin found in chamomile leaf rosettes is known as the oxidative stress protector. In the current study, herniarin was captured into Graphene oxide nanoparticles and coated with chitosan poly-cationic polymer to be used as a novel bio-compatible nano-drug delivery system and investigate its antioxidant, anti-angiogenic and anti-cancer impacts on human lung A549 cancer cells.

Method

The Chitosan-coated Herniarin-Graphene oxide nanoparticles (CHG-NPs) were designed, produced, and characterized utilizing DLS, FESEM, FTIR, and Zeta-potential analysis. The CHG-NPs' antioxidant activity was analyzed by conducting ABTS and DPPH antioxidant assays. The CHG-NPs' anti-angiogenic activity was analyzed by CAM assay and verified by measuring VEGF and VEGFR gene expression levels following their increased treatment doses by applying Q-PCR technique. Finally, the CHG-NPs' cytotoxicity was studied in the human lung A549 cancer cells.

Result

The stable (+27.11 mV) 213.6-nm CHG-NPs significantly inhibited the ABTS/DPPH free radicals and exhibited antioxidant activity. The suppressed angiogenesis process in the CAM vessels was observed by detecting the decreased length/number of the vessels. Moreover, the down-regulated VEGF and VEGFR gene expression of the CAM blood vessels following the increased CHG-NPs treatment doses verified the nanoparticles' anti-angiogenic potential. Finally, the CHG-NPs significantly exhibited a selective cytotoxic impact on human A549 cancer cells compared with the normal HFF cell line.

Conclusion

The selective cytotoxicity, strong antioxidant activity, and significant anti-angiogenic property of the nano-scaled produced CHG-NPs make it an appropriate anticancer nano-drug delivery system. Therefore, the CHG-NPs have the potential to be used as a selective anti-lung cancer compound.

Preparation of chitin/MXene/poly(L-arginine) composite aerogel spheres for specific adsorption of bilirubin

Currently, hemoperfusion is clinically the most rapid and effective treatment for removing toxins from the blood. The core of hemoperfusion is the sorbent inside the hemoperfusion device. Due to the complex composition of the blood, adsorbents tend to adsorb substances such as proteins in the blood (non-specific adsorption) while adsorbing toxins. Hyperbilirubinemia is caused by excessive levels of bilirubin in the human blood, causing irreversible damage to the patient's brain and nervous system, and even leading to death. High adsorption and high biocompatibility adsorbents with specific bilirubin adsorption are urgently needed to treat hyperbilirubinemia. Herein, poly(L-arginine) (PLA) which can specifically adsorb bilirubin, was introduced into chitin/MXene (Ch/MX) composite aerogel spheres. Ch/MX/PLA prepared by supercritical CO₂ technology had higher mechanical properties than Ch/MX and can withstand 50,000 times its own weight. The in vitro simulated hemoperfusion test showed that the adsorption capacity of Ch/MX/PLA was as high as 596.31 mg/g, which was 15.38 % higher than that of Ch/MX. Binary and ternary competitive adsorption tests showed that Ch/MX/PLA also had good adsorption capacity in the presence of a variety of interfering molecules. In addition, hemolysis rate testing and CCK-8 testing confirmed that Ch/MX/PLA had better biocompatibility and hemocompatibility. Ch/MX/PLA can meet the required properties of clinical hemoperfusion sorbents and has the ability to produce mass production. It has good application potential in the clinical treatment of hyperbilirubinemia.

Multi-dimensional plasmonic coupling system for efficient enrichment and ultrasensitive label-free SERS detection of bilirubin based on graphene oxide-Au nanostars and Au@Ag nanoparticles

Rapid and sensitive detection of free bilirubin (BR) is essential for early diagnosis of jaundice and other hepatobiliary diseases. Inspired by sandwich immunoassay strategy, a multi-dimensional plasmonic coupling SERS platform composed of graphene oxide-Au nanostars nanocomposites (GANS NCs) and Au@Ag nanoparticles (NPs) was designed for label-free detection of BR. Specifically, GANS NCs were first prepared, and their excellent SERS activity was ascribed to synergistic enhancement effect of electromagnetic enhancement and chemical enhancement. Furthermore, SERS spectroscopy was used to monitor the adsorption process of BR. Subsequently, secondary reinforcing Au@Ag NPs were directly added, ultimately resulting in a multi-dimensional plasmonic coupling effect. The SERS enhancing mechanism of coupled system was discussed through electromagnetic field simulations. Interestingly, the high-density hotspots generated by strong plasmonic coupling in GANS-Au@Ag substrate could lead to more extraordinary SERS enhancing behavior compared to GANS NCs. Sensing efficiency of the SERS platform was examined by BR with a detection limit down to 10^-11 M. Besides, GANS-Au@Ag NCs performed high uniformity and reproducibility. This work not only opens up a new avenue for construction of multi-dimensional plasmonic coupling system, but also offers a new biosensing technology for label-free diagnosis of BR-related diseases, thereby expecting to be applied in clinical diagnosis.

Emerging Trends in Nanotechnology: Aerogel-Based Materials for Biomedical Applications

At present, aerogel is one of the most interesting materials globally. The network of aerogel consists of pores with nanometer widths, which leads to a variety of functional properties and broad applications. Aerogel is categorized as inorganic, organic, carbon, and biopolymers, and can be modified by the addition of advanced materials and nanofillers. Herein, this review critically discusses the basic preparation of aerogel from the sol-gel reaction with derivation and modification of a standard method to produce various aerogels for diverse functionalities. In addition, the biocompatibility of various types of aerogels were elaborated. Then, biomedical applications of aerogel were focused on this review as a drug delivery carrier, wound healing agent, antioxidant, anti-toxicity, bone regenerative, cartilage tissue activities and in dental fields. The clinical status of aerogel in the biomedical sector is shown to be similarly far from adequate. Moreover, due to their remarkable properties, aerogels are found to be preferably used as tissue scaffolds and drug delivery systems. The advanced studies in areas including self-healing, additive manufacturing (AM) technology, toxicity, and fluorescent-based aerogel are crucially important and are further addressed.

High strength chitin/chitosan-based aerogel with 3D hierarchically macro-meso-microporous structure for high-efficiency adsorption of Cu(II) ions and Congo red

A high-strength aerogel with a 3D hierarchically macro-meso-microporous structure (HPS-aerogel) was designed based on biological macromolecules of chitin and chitosan. The macropores can be created within HPS-aerogel after CaCO₃ removal, and meso-micropores resulting from water sublimation during freeze-drying. The macro-meso-microporous structure endowed HPS-aerogel with high porosity, good mechanical properties, and excellent compression strength (1472 kPa at strain of 80 %). The HPS-aerogel exposed many adsorption sites and was used as an adsorbent to simultaneously remove Cu(II) and Congo red (CR) from water for the first time. The adsorption capability for Cu(II) and CR was 59.21 mg/g and 2074 mg/g at 303 K, respectively, and the adsorption processes matched Pseudo-second-order and Langmuir models with spontaneous and endothermic nature. Additionally, HPS-aerogel showed good anti-interference ability for coexisting pollutant. Importantly, HPS-aerogel exhibited an effective fixed-bed column adsorption performance for dynamic Cu(II) and CR with superior reusability and stability. Furthermore, HPS-aerogel showed outstanding adsorption efficiencies for Cu(II) and CR in real samples. The main adsorption mechanism for Cu(II) was attributed to the electrostatic attraction and chelation, and which was electrostatic attraction, Schiff base, and hydrogen bonding for CR. Therefore, HPS-aerogel should to be a promising adsorbent for removing both heavy-metal ions and dyes from wastewater.

Bilirubin Removal by Polymeric Adsorbents for Hyperbilirubinemia Therapy

Hyperbilirubinemia, presenting as jaundice, is a life-threatening critical illness in newborn babies and acute severe hepatic failure patients. Over the past few decades, extracorporeal hemoadsorption by adsorbent therapy has been widely applied in the treatment of hyperbilirubinemia. The capability of hemoadsorption depends on the adsorbents. Most of the clinically used bilirubin adsorbents are made up of styrene/divinylbenzene copolymer and quaternary ammonium salt, which usually have poor biocompatibility and weak mechanical strength. To overcome the drawbacks of commercial polymer adsorbents, advanced synthetic and natural polymers with/without nanomaterials have been designed, and novel adsorbent fabrication technologies have also been developed. In this review, the adsorption mechanism of bilirubin adsorbents has been summarized, which is the basic criterion in adsorbent development. Furthermore, the preparation method, adsorption mechanism, relative merits and practicability of the emerging bilirubin adsorbents have been evaluated. Based on the existing studies, this work highlights the future direction of the efforts on how to design and develop bilirubin adsorbents with good overall clinical performance. Perhaps this study can change traditional perspectives and propose new strategies for bilirubin clearance from the aspects of pathogenic mechanisms, metabolic pathways, and material-based innovation.

Microfluidic electrospray generation of porous magnetic Janus reduced graphene oxide/carbon composite microspheres for versatile adsorption

HYPOTHESIS

Graphene-based microparticles materials are broadly utilized in all sorts of fields owing to their outstanding properties. Despite great progress, the present graphene microparticles still face challenges in the aspects of size uniformity, motion flexibility, and tailorable surface chemistry, which limit their application in some specific fields, such as versatile adsorption. Hence, the development of novel graphene microparticles with the aforementioned characteristics is urgently required.

EXPERIMENTS

We presented a simple microfluidic electrospray strategy to generate magnetic Janus reduced graphene oxide/carbon (rGO/C) composite microspheres with a variety of unique features. Specifically, the microfluidic electrospray method endowed the obtaiend microspheres with sufficient size uniformity as well as magnetic responsive motion ability. Additionally, magnetic-mediated surface assembly of phase transition lysozyme (PTL) nanofilm on the microspheres rendered the deposited area hydrophilic while non-deposited area hydrophobic.

FINDINGS

Such magnetic Janus rGO/C composite microspheres with regionalized wettability characteristics not only showed prominent performance in adsorbing organic liquids with high adsorption capacity and remarkable reusability but also displayed satisfying biocompatibility for the efficient uptake of bilirubin. More encouragingly, the microspheres could serve as adsorbents in a simulative hemoperfusion setup, which further demonstrated the clinical application potential of the magnetic Janus rGO/C microspheres. Thus, we anticipate that the obtained magnetic Janus rGO/C composite microspheres could show multifunctional properties toward water treatment and blood molecule cleaning.

Improving Polysaccharide-Based Chitin/Chitosan-Aerogel Materials by Learning from Genetics and Molecular Biology

Improved wound healing of burnt skin and skin lesions, as well as medical implants and replacement products, requires the support of synthetical matrices. Yet, producing synthetic biocompatible matrices that exhibit specialized flexibility, stability, and biodegradability is challenging. Synthetic chitin/chitosan matrices may provide the desired advantages for producing specialized grafts but must be modified to improve their properties. Synthetic chitin/chitosan hydrogel and aerogel techniques provide the advantages for improvement with a bioinspired view adapted from the natural molecular toolbox. To this end, animal genetics provide deep knowledge into which molecular key factors decisively influence the properties of natural chitin matrices. The genetically identified proteins and enzymes control chitin matrix assembly, architecture, and degradation. Combining synthetic chitin matrices with critical biological factors may point to the future direction with engineering materials of specific properties for biomedical applications such as burned skin or skin blistering and extensive lesions due to genetic diseases.

Biocompatible Composite Microspheres of Chitin/Ordered Mesoporous Carbon CMK3 for Bilirubin Adsorption and Cell Microcarrier Culture

Extra bilirubin in the blood can provoke serious illness in patients with severe liver disease. Hemoperfusion is an effective method to remove the extra bilirubin, but its application is limited by the low adsorption efficiency and poor biocompatibility of available adsorbent materials. In this study, chitin/ordered mesoporous carbon CMK3 (Ch/CMK3) microspheres were successfully prepared. Results of characterization experiments indicated that these composite microspheres possess a multilayered porous nanofibrous structure with an extremely large specific surface area (300.19 m² g^-1 ) and large pore size. Notably, the Ch/CMK3 microspheres demonstrated a high bilirubin adsorption capacity (228.19 mg g^-1 ) in phosphate buffer solution, and an outstanding bilirubin removal ratio (76.78%±4.40%) in the plasma of rabbits with hyperbilirubinemia without affecting the protein components. More importantly, the Ch/CMK3 microspheres showed no effect on other blood components, no cytotoxicity, and no systemic toxicity to mice. Cell coculture experiments revealed that the microspheres could provide a three-dimensional (3D) space to promote cell adhesion, proliferation, and nutrient exchange. These Ch/CMK3 microspheres featuring a strong ability for bilirubin adsorption and good biocompatibility could be a promising candidate in biomedical applications such as hemoperfusion, cell microcarrier, and 3D tissue engineering. This article is protected by copyright. All rights reserved.

Hydroxyapatite reinforced inorganic-organic hybrid nanocomposite as high-performance adsorbents for bilirubin removal in vitro and in pig models

Highly efficient removal of bilirubin from whole blood directly by hemoperfusion for liver failure therapy remains a challenge in the clinical field due to the low adsorption capacity, poor mechanical strength and low biocompatibility of adsorbents. In this work, a new class of nanocomposite adsorbents was constructed through an inorganic-organic co-crosslinked nanocomposite network between vinyltriethoxysilane (VTES)-functionalized hydroxyapatite nanoparticles (V-Hap) and non-ionic styrene-divinylbenzene (PS-DVB) resins (PS-DVB/V-Hap) using suspension polymerization. Notably, our adsorbent demonstrated substantially improved mechanical performance compared to the pure polymer, with the hardness and modulus increasing by nearly 3 and 2.5 times, respectively. Moreover, due to the development of a mesoporous structure, the prepared PS-DVB/V-Hap3 exhibited an ideal adsorption capacity of 40.27 mg g-1. More importantly, the obtained adsorbent beads showed outstanding blood compatibility and biocompatibility. Furthermore, in vivo extracorporeal hemoperfusion verified the efficacy and biosafety of the adsorbent for directly removing bilirubin from whole blood in pig models, and this material could potentially prevent liver damage and improve clinical outcomes. Taken together, the results suggest that PS-DVB/V-Hap3 beads can be used in commercial adsorption columns to threat hyperbilirubinemia patients through hemoperfusion, thus replacing the existing techniques where plasma separation is initially required.

Applications of chitin and chitosan based biomaterials for the adsorptive removal of textile dyes from water - A comprehensive review

The presence of pollutants in the water bodies deteriorate the water quality and make it unfit for use. From an environmental perspective, it is essential to develop new technologies for the wastewater treatment and recycling of dye contaminated water. The surface modified chitin and chitosan biopolymeric composites based adsorbents, have an important role in the toxic organic dyes from removal wastewater. The surface modification of biopolymers with various organics and inorganics produces more active sites at the surface of the adsorbent, which enhances dye and adsorbent interaction more reliable. Herein, the work brought in the thought of the application of various chitin and chitosan composites in wastewater remediation and suggested the versatility in composites for the development of rapid, selective and effective removal processes for the detoxification of a variety of organic dyes. It further emphasizes the existing obstruction and impending prediction for the deprivation of dyes via adsorption techniques.

Enhancement of hydrothermal carbonization of chitin by combined pretreatment of mechanical activation and FeCl3

In this work, a combined mechanical activation and FeCl₃ (MA + FeCl₃) method was applied to pretreat chitin to enhance the degree of hydrothermal carbonization. MA + FeCl₃ pretreatment significantly disrupt the crystalline region of chitin and Fe³⁺ entered into the molecular chain, resulting in the destruction of the stable structure of chitin. The chemical and structural properties of hydrochars were characterized by EA, SEM, FTIR, XRD, XPS, ¹³C solid state NMR, and N₂ adsorption-desorption analyses. The results showed that the H/C and O/C atomic ratios of HC-MAFCT/230 (the hydrochar derived from MA + FeCl₃ pretreated chitin with hydrothermal reaction temperature of 230 °C) were 0.96 and 0.34, respectively. Van Krevelen diagram indicated that the hydrothermal carbonization of chitin underwent a series of reactions such as dehydration, decarboxylation, and aromatization. HC-MAFCT/230 had abundant oxygen- and nitrogen-containing functional groups. HC-MAFCT/230 exhibited a porous structure, with the specific surface area of 128 m² g^-1, which was a promising carbon material.

Hierarchical core-shell nanoplatforms constructed from Fe3O4@C and metal-organic frameworks with excellent bilirubin removal performance

Hemoperfusion has become the third-generation treatment strategy for patients suffering from hyperbilirubinemia, but adsorbents used for bilirubin removal mostly face intractable problems, such as unsatisfactory adsorption performance and poor hemocompatibility. Metal-organic frameworks (MOFs) are promising adsorbents for hemoperfusion due to their high specific surface areas and easily modified organic ligands. However, their microporous properties and separation have hampered their application. Here, a novel hierarchical core-shell nanoplatform (named Double-PEG) with tailored binding sites and pore sizes based on Fe3O4@C and Uio66-NH2 was constructed. Notably, Double-PEG showed excellent bilirubin uptake of up to 1738.30 mg g-1 and maintained excellent bilirubin removal efficiency in simulated biological solutions. A study on the adsorption mechanism showed that the adsorption of Double-PEG towards bilirubin tended to be chemical adsorption and in accordance with the Langmuir model. Besides, the good separability, recyclability, cytotoxicity and hemocompatibility of Double-PEG show great potential in hemoperfusion therapy. The finding of this study may provide a novel insight into the application of MOF materials in the field of hemoperfusion.

Recent Progress in Polysaccharide Aerogels: Their Synthesis, Application, and Future Outlook

Porous polysaccharides have recently attracted attention due to their porosity, abundance, and excellent properties such as sustainability and biocompatibility, thereby resulting in their numerous applications. Recent years have seen a rise in the number of studies on the utilization of polysaccharides such as cellulose, chitosan, chitin, and starch as aerogels due to their unique performance for the fabrication of porous structures. The present review explores recent progress in porous polysaccharides, particularly cellulose and chitosan, including their synthesis, application, and future outlook. Since the synthetic process is an important aspect of aerogel formation, particularly during the drying step, the process is reviewed in some detail, and a comparison is drawn between the supercritical CO2 and freeze drying processes in order to understand the aerogel formation of porous polysaccharides. Finally, the current applications of polysaccharide aerogels in drug delivery, wastewater, wound dressing, and air filtration are explored, and the limitations and outlook of the porous aerogels are discussed with respect to their future commercialization.

A facile synthesis of graphene oxide/locust bean gum hybrid aerogel for water purification

Graphene oxide/locust bean gum (GO/LBG) aerogels, synthesized in an ice crystal template without using any chemical modifiers, were used for the treatment of water pollution. Various characterization results showed that GO/LBG aerogel exhibited a network-like three-dimensional (3D) structure with large specific surface area. The adsorption data revealed that GO/LBG aerogels with GO/LBG mass ratio of 1:4 (GO/LBG-1 aerogels) exhibited more prominent adsorption properties for Rhodamine-B (RhB, 514.5 mgg^-1) than Indigo Carmine (IC, 134.6 mgg^-1). Simultaneously, GO/LBG-1 aerogels could selectively remove RhB from a binary mixed solution of RhB-IC dyes. Furthermore, GO/LBG-1 aerogels also displayed excellent reusability and could still reach 92.4 % after ten cycles. Based on the above results, GO/LBG-1 aerogel could be considered as an ideal adsorbent with potential application value for removing water-soluble RhB from wastewater.

Design of 3D alumina-doped magnesium oxide aerogels with a high efficiency removal of uranium(vi) from wastewater

3D alumina-doped magnesium oxide (Al₂O₃/MgO) aerogels with remarkable adsorption properties for U(vi) were prepared via a simple lyophilization–calcination method.

High-strength, blood-compatible, and high-capacity bilirubin adsorbent based on cellulose-assisted high-quality dispersion of carbon nanotubes

Excess bilirubin can accumulate in body organs and has serious effects on human health. In this work, a simple engineering strategy, based on cellulose-assisted high-quality dispersion of carbon nanotubes (CNTs), is proposed to produce high-performance bilirubin adsorbents. By dispersing cellulose and CNTs in NaOH/thiourea aqueous solution, a homogeneous and stable cellulose/CNTs solution is achieved. The obtained cellulose/CNTs solution is applied for the fabrication of cellulose/CNTs microspheres (CCMs), in which cellulose serves as a base material and guarantees the blood compatibility of the composite material, and CNTs contribute to the improved mechanical strength and high adsorption capacity. To further improve blood compatibility and adsorption capacity, lysine is immobilized on the CCMs. The obtained lysine-modified CCMs (LCCMs) exhibit a large surface area (171.31 m²/g) and hierarchically porous structure. Experimental results demonstrate LCCMs have high bilirubin adsorption capacity (204.12 mg/g) that is significantly higher than most of the reported adsorbents. The combination of high strength, blood compatibility, and high adsorption capacity positions the LCCMs as a promising candidate for bilirubin removal.

Chitin and Chitosan Derivatives as Biomaterial Resources for Biological and Biomedical Applications

Chitin is a long-chain polymer of N-acetyl-glucosamine, which is regularly found in the exoskeleton of arthropods including insects, shellfish and the cell wall of fungi. It has been known that chitin can be used for biological and biomedical applications, especially as a biomaterial for tissue repairing, encapsulating drug for drug delivery. However, chitin has been postulated as an inducer of proinflammatory cytokines and certain diseases including asthma. Likewise, chitosan, a long-chain polymer of N-acetyl-glucosamine and d-glucosamine derived from chitin deacetylation, and chitosan oligosaccharide, a short chain polymer, have been known for their potential therapeutic effects, including anti-inflammatory, antioxidant, antidiarrheal, and anti-Alzheimer effects. This review summarizes potential utilization and limitation of chitin, chitosan and chitosan oligosaccharide in a variety of diseases. Furthermore, future direction of research and development of chitin, chitosan, and chitosan oligosaccharide for biomedical applications is discussed.

Synthesis and characterization of graphene oxide chitosan aerogels reinforced with flavan-3-ols as hemostatic agents

The natural mechanisms of the body cannot control massive hemorrhaging, resulting in a requirement for hemostatic intervention. In this study, Graphene oxide and Chitosan aerogels reinforced with grape seed (SD) and skin (SK) extracts were developed for use as hemostatic agents by evaluating the influence of pH on their synthesis, and the amount of grape extract added on the physical and chemical properties of the aerogels. The material was evaluated by FTIR, XRD, Raman spectroscopy, DLS, uniaxial compression tests and SEM. The capacity of the aerogels to absorb water, PBS and blood, as well as their coagulation capacity, were determined. In addition, the release profile for grape extracts in PBS and the material's cytotoxicity were determined. The aerogels that were synthesized under basic conditions and loaded with grape extracts were more rigid and negatively charged, and they presented smaller pores than the un-loaded acidic aerogels. For all aerogels, the hemoglobin absorption was greater than 90 % in the first 30 s. A higher density of adsorbed blood cells was observed on aerogels loaded with a higher amount of grape extract. The maximum release of extract from the aerogels occurred for those loaded with SK extracts at a basic pH; the aerogels that were prepared under acidic conditions dissolved in the media. Aerogels loaded with SK extracts under alkaline conditions were not cytotoxic toward human dermal fibroblasts and exhibited cell viabilities above 90 %. These findings suggest that these aerogels have the potential for use as hemostatic agents in wound management.

Chitosan-Based Aerogel Particles as Highly Effective Local Hemostatic Agents. Production Process and In Vivo Evaluations

Chitosan aerogels with potential applications as effective local hemostatic agents were prepared using supercritical carbon dioxide drying to preserve the chitosan network structure featuring high internal surfaces and porosities of up to 300 m²/g and 98%, respectively. For the first time, hemostatic efficacy of chitosan-based aerogel particles was studied in vivo on a model of damage of a large vessel in the deep wound. Pigs were used as test animals. It was shown that primary hemostasis was achieved, there were no signs of rebleeding and aerogel particles were tightly fixed to the walls of the wound canal. A dense clot was formed inside the wound (at the femoral artery), which indicates stable hemostasis. This study demonstrated that chitosan-based aerogel particles have a high sorption capacity and are highly effective as local hemostatic agents which can be used to stop massive bleeding.

Amides and Heparin-Like Polymer Co-Functionalized Graphene Oxide Based Core @ Polyethersulfone Based Shell Beads for Bilirubin Adsorption

Excessive bilirubin in the body of patient with liver dysfunction or metabolic obstruction may cause jaundice with irreversible brain damage, and new type of adsorbent for bilirubin is under frequent investigation. Herein, graphene oxide based core @ polyethersulfone-based shell beads are fabricated by phase inversion method, amides and heparin-like polymer are introduced to functionalize the core-shell beads. The beads are successfully prepared with obvious core-shell structure, adequate thermostability and porous shell. Clotting times and protein adsorption are investigated to inspect the hemocompatibility property of the beads. The adsorption of bilirubin is systematically investigated by evaluating the effects of contacting time, initial concentration and temperature on the adsorption, which exhibits improved bilirubin adsorption amount for the beads with amides contained cores or/and shells. It is worth believing that the amides and heparin-like polymer co-functionalized core-shell beads may be utilized in the field of hemoperfusion for bilirubin adsorption.

Design and Characterization of Chitosan-Graphene Oxide Nanocomposites for the Delivery of Proanthocyanidins

Introduction

In the last years, the utilization of phytomedicines has increased given their good therapeutic activity and fewer side effects compared to allopathic medicines. However, concerns associated with the biocompatibility and toxicity of natural compounds, limit the phytochemical therapeutic action, opening the opportunity to develop new systems that will be able to effectively deliver these substances. This study has developed a nanocomposite of chitosan (CS) functionalized with graphene oxide (GO) for the delivery of proanthocyanidins (PAs), obtained from a grape seed extract (Ext.).

Methods

The GO-CS nanocomposite was covalently bonded and was characterized by Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), atomic force microscopy (AFM) and by dynamic light scattering (DLS). The loading and release of Ext. from the GO-CS nanocomposite were performed in simulated physiological, and the cytotoxicity of the raw materials (GO and Ext.) and nanocomposites (GO-CS and GO-CS-Ext.) was determined using a human kidney cell line (HEK 293).

Results

The chemical characterization indicated that the covalent union was successfully achieved between the GO and CS, with 44 wt. % CS in the nanocomposite. The GO-CS nanocomposite was thermostable and presented an average diameter of 480 nm (by DLS). The Ext. loading capacity was approximately 20 wt. %, and under simulated physiological conditions, 28.4 wt.% Ext. (g) was released per g of the nanocomposite. GO-CS-Ext. was noncytotoxic, presenting a 97% survival rate compared with 11% for the raw extract and 48% for the GO-CS nanocomposite at a concentration of 500 µg mL-1 after 24 hrs.

Conclusion

Due to π–π stacking and hydrophilic interactions, GO-CS was reasonably efficient in binding Ext., with high loading capacity and Ext. release from the nanocomposite. The GO-CS nanocomposite also increased the biocompatibility of PAs-rich Ext., representing a new platform for the sustained release of phytodrugs.

Graphene Nanoplatelets Modified with Amino-Groups by Ultrasonic Radiation of Variable Frequency for Potential Adsorption of Uremic Toxins

Chronic kidney disease (CKD) is a worldwide public health problem. In stages III and IV of CKD, uremic toxins must be removed from the patient by absorption, through a treatment commonly called hemodialysis. Aiming to improve the absorption of uremic toxins, we have studied its absorption in chemically modified graphene nanoplatelets (GNPs). This study involved the reaction between GNPs and diamines with reaction times of 30, 45 and 60 min using ultrasound waves of different amplitudes and frequencies. Functionalized GNPs were analyzed by Fourier Fourier-transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), Scanning electron microscopy and energy dispersitive spectroscopy (SEM-EDS), and Thermogravimetric analysis (TGA). The analysis of the functional groups confirmed the presence of amide and hydroxyl groups on the surface of the GNPs by reactions of diamines with carboxylic acids and epoxides. Adsorption of uremic toxins was determined using equilibrium isotherms, where the maximum percentage of removal of uremic toxins was 97%. Dispersion of modified graphene nanoplatelets was evaluated in water, ethanol and hexane, as a result of this treatment was achieved a good and effective dispersion of diamines-modified graphene nanoplatelets in ethanol and hexane. Finally, the results of hemolysis assays of the modified graphene with amine demonstrated that it was not cytotoxic when using 500 mg/mL. The samples of modified graphene demonstrated low degree of hemolysis (<2%), so this material can be used for in vivo applications such as hemodialysis.