Development of multifunctional modified cotton fabric with tri-component nanoparticles of silver, copper and zinc oxide

Bimetallic nanoparticles with sulfated galactan eliminate Vibrio parahaemolyticus in shrimp Penaeus vannamei

Bimetallic (Au/Ag) nanoparticles (BNPs) have shown enhanced antibacterial activity compared to their monometallic counterparts. Sulfated galactans (SG) are a naturally occurring polymer commonly found in red seaweed Gracilaria fisheri. They are biocompatible and biodegradable and environmentally friendly. In this study, we utilized SG in combination with BNPs to develop composite materials that potentially enhance antibacterial activity against shrimp pathogens Vibrio parahaemolyticus and Vibrio harveyi, compared to BNPs or SG alone. BNPs were coated with sulfated galactan (SGBNPs) and characterized using UV-vis spectroscopy, Fourier transform infrared (FTIR) spectroscopy, zeta potential, and transmission electron microscopy (TEM). UV-vis spectroscopy analysis revealed that the surface plasmon peaks of BNPs and SGBNPs appeared at 530 nm and 532 nm, respectively. Zeta potential measurements showed that SGBNPs had a negative charge of -32.4 mV, while the BNPs solution had a positive charge of 38.7 mV. TEM images demonstrated the spherical morphology of both BNPs and SGBNPs with narrow size distributions (3-10 nm). Analysis of the FTIR spectra indicated that SG maintained its backbone structure in SGBNPs, but some functional groups were altered. Notably, SGBNPs showed superior antimicrobial and antibiofilm activities against V. parahaemolyticus and V. harveyi compared to SG and BNPs. Furthermore, treatment with SGBNPs significantly down-regulated the expression of virulence-related genes (toxR, cpsQ, and mfpA) for V. parahaemolyticus 3HP compared to the respective control, bacteria treated with BNPs or SG. Diets supplemented with SGBNPs, BNPs, or SG showed no detrimental impact on the growth of shrimp Penaeus vannamei. Shrimp fed with SGBNPs-supplemented feed showed significantly higher survival rates than those fed with BNPs-supplemented feed when infected with 3HP after being on the supplemented feed for seven days and a subsequent number of fifteen days. These findings collectively demonstrate the benefit of using SG capped Au-Ag BNPs as an antibacterial agent for the prevention and control of Vibrio sp. Infection in shrimp while reducing the risk of environmental contamination.

Preparation of Green Silver Nanoparticles and Eco-Friendly Polymer-AgNPs Nanocomposites: A Study of Toxic Properties across Multiple Organisms

This article focuses on the eco-friendly (green) synthesis of silver nanoparticles (AgNPs) and their incorporation into a polymer matrix. For AgNPs synthesis, Lavandula angustifolia (lavender) leaf extract was used as a reducing and stabilizing agent, and as a silver precursor, AgNO3 solution with different concentrations of silver (50, 100, 250, and 500 mg/L) was used. Prepared AgNPs colloids were characterized using UV-vis spectrophotometry, transmission electron microscopy (TEM), and X-ray diffraction (XRD). The spherical morphology of AgNPs with an average size of 20 nm was confirmed across all samples. Further, the antimicrobial properties of the AgNPs were evaluated using the disk diffusion method on algae (Chlorella kessleri) and the well diffusion method on bacteria (Staphylococcus chromogenes, Staphylococcus aureus, and Streptococcus uberis), along with root growth inhibition tests on white mustard (Sinapis alba). Polymer composite (PVA-AgNPs) was prepared by incorporation of AgNPs into the polymer matrix. Subsequently, non-woven textiles and thin foils were prepared. The distribution of AgNPs within the nanocomposites was observed by scanning electron microscopy (SEM). Antibacterial properties of PVA-AgNPs composites were analyzed on bacteria Streptococcus uberis. It was found that not only AgNPs showed good antimicrobial properties, but toxic properties were also transferred to the PVA-AgNPs nanocomposite.

Plant-Assisted Synthesis of Ag-Based Nanoparticles on Cotton: Antimicrobial and Cytotoxicity Studies

The syntheses of Ag-based nanoparticles (NPs) with the assistance of plant extracts have been shown to be environmentally benign and cost-effective alternatives to conventional chemical syntheses. This study discusses the application of Paliurus spina-christi, Juglans regia, Humulus lupulus, and Sambucus nigra leaf extracts for in situ synthesis of Ag-based NPs on cotton fabric modified with citric acid. The presence of NPs with an average size ranging from 57 to 99 nm on the fiber surface was confirmed by FESEM. XPS analysis indicated that metallic (Ag0) and/or ionic silver (Ag2O and AgO) appeared on the surface of the modified cotton. The chemical composition, size, shape, and amounts of synthesized NPs were strongly dependent on the applied plant extract. All fabricated nanocomposites exhibited excellent antifungal activity against yeast Candida albicans. Antibacterial activity was significantly stronger against Gram-positive bacteria Staphylococcus aureus than Gram-negative bacteria Escherichia coli. In addition, 99% of silver was retained on the samples after 24 h of contact with physiological saline solution, implying a high stability of nanoparticles. Cytotoxic activity towards HaCaT and MRC5 cells was only observed for the sample synthetized in the presence of H. lupulus extract. Excellent antimicrobial activity and non-cytotoxicity make the developed composites efficient candidates for medicinal applications.

Involvement of silver and palladium with red peanuts skin extract for cotton functionalization

A systematic study is currently demonstrated approach for approving the superior role of silver and palladium metallic particles in acting the role of mordant with acquiring the dyed cotton fabrics excellence in color fastness with additional functions of antimicrobial potentiality and UV-protection action. Whereas, samples were dyed with extract of red peanuts skin as natural textile colorant (RPN dye). The represented data revealed that, in absence of mordant, the samples treated with metal precursors prior to dyeing were exhibited with the excellent color strength, color fastness, antimicrobial action and UV-protection action. Color fastness (washing, rubbing and light fastness) was estimated to be in the range of very good-excellent. Sample pretreated with silver salt and dyed in the absence of mordant was graded with excellent UV-protection action (UPF 31.5, UVB T% 2.6% and UVB blocking percent 97.4%). Antimicrobial potency against E. coli, S. aureus and Candida albicans through inhibition zone and the reduction percent was approved to be in the range of excellence (93.01-99.51%) for the samples dyed in absence of mordant and pretreated with either silver or palladium precursors.

Improved cotton fabrics properties using zinc oxide-based nanomaterials: A review

Zinc oxide nanoparticles (ZnO NPs) have gained significant attention in the textile industry for their ability to enhance the physicochemical properties of fabrics. In recent years, there has been a growing focus on the development of ZnO-based nanomaterials and their applications for cotton and other fabrics. This review paper provides an overview of the synthesis and diverse applications of ZnO-based nanomaterials for textile fabrics, including protection against UV irradiation, bacteria, fungi, microwave, electromagnetic radiation, water, and fire. Furthermore, the study offers the potential of these materials in energy harvesting applications, such as wearable pressure sensors, piezoelectric nanogenerators, supercapacitors, and human energy harvesting. Additionally, we discuss the potential of ZnO-based nanomaterials for environmental cleaning, including water, oil, and solid cleaning. The current research in this area has focused on various materials used to prepare ZnO-based nanocomposites, such as metals/nonmetals, semiconductors, metal oxides, carbon materials, polymers, MXene, metal-organic frameworks, and layered double hydroxides. The findings of this review highlight the potential of ZnO-based nanomaterials to improve the performance of textile fabrics in a range of applications, and the importance of continued research in this field to further advance the development and use of ZnO-based nanomaterials in the textile industry.

Fabrication of Enhanced UV Protective Cotton Fabric Using Activated Nano-Biocarbon Derived from Teff Hay Grafted by Polyaniline: RSM-Based Optimization and Characterization

In the present study, a hybrid cotton fabric with an enhanced ultraviolet (UV) shielding property was developed by coating with functionally activated nanocarbon (FACN) which was grafted by polyaniline (PANI) using in situ polymerization. In light of this, Teff hay biomass was used to establish the activated nanocarbon (ANC), that was subsequently given a surface functionalization using a silane coupling agent. Using the response surface (RSM) statistical analysis, the study was optimized for the weight percent of ANC and PANI with respect to the cotton fabric that was found to offer remarkable UV protection, with an ultraviolet protection factor (UPF) of 64.563, roughly 17 times more than that of primitive cotton (UPF = 3.7). The different characterization techniques, such as UV absorption, Fourier transform infrared (FTIR), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and thermal behavior studies were investigated. In addition, the basic textile properties on optimized hybrid material were found to be appreciably increased. The results suggested that activated FACN made from Teff hay could be an effective alternative organic source material for developing UV protective hybrid cotton fabrics.

Facile Process for the Development of Antiviral Cotton Fabrics with Nano-Embossed Copper Oxide

Metallic or metal oxide-based nanoparticles have the potential to inactivate viruses. Among various metals, copper has shown edge over others. One of the rapidly evolving areas is to combine nanoscience for production of self-sanitizing antiviral surfaces. In this study, we designed antiviral-coated fabrics to combat the spread of viruses. Copper oxide nanoparticles were sonochemically synthesized and subsequently deposited using the dip-coat process to modify the surface of fabric. The morphology and structure of uncoated and coated fabrics were examined by scanning electron microscopy, X-ray diffraction, FTIR, and elemental analysis. The findings show that small, agglomerated rugby ball structures made of copper oxide (CuO) nanoparticles (16 ± 1.6 nm, according to the Scherrer equation) develop on the surface of fabric, resulting in nano-embossing and a hydrophobic (contact angle > 140°) surface. The CuO-coated fabric yielded the maximum zone of inhibition for antibacterial activity. The virucidal activity (against human adenovirus-B) of CuO nanoparticle-fabricated fabric against adenovirus shows decreased 99.99% according to the ISO 18184 testing standard. With the dip and dry approach, any textile industry can use the simple coating procedure without having to change its textile operations. This fabric can be widely used in the face mask, clothing, bedding, and aprons, and the coating remains efficient over more than 25 washes.

Highly stable, antiviral, antibacterial cotton textiles via molecular engineering

Cotton textiles are ubiquitous in daily life and are also one of the primary mediums for transmitting viruses and bacteria. Conventional approaches to fabricating antiviral and antibacterial textiles generally load functional additives onto the surface of the fabric and/or their microfibres. However, such modifications are susceptible to deterioration after long-term use due to leaching of the additives. Here we show a different method to impregnate copper ions into the cellulose matrix to form a copper ion-textile (Cu-IT), in which the copper ions strongly coordinate with the oxygen-containing polar functional groups (for example, hydroxyl) of the cellulose chains. The Cu-IT displays high antiviral and antibacterial performance against tobacco mosaic virus and influenza A virus, and Escherichia coli, Salmonella typhimurium, Pseudomonas aeruginosa and Bacillus subtilis bacteria due to the antimicrobial properties of copper. Furthermore, the strong coordination bonding of copper ions with the hydroxyl functionalities endows the Cu-IT with excellent air/water retainability and superior mechanical stability, which can meet daily use and resist repeated washing. This method to fabricate Cu-IT is cost-effective, ecofriendly and highly scalable, and this textile appears very promising for use in household products, public facilities and medical settings.

Chitosan-organosilica hybrid decorated with silver nanoparticles for antimicrobial wearable cotton fabrics

Functional cotton fabrics using silver-based nanoparticles (AgNPs) have attracted a lot of attention as a new generation of healthcare wearable textile. In this study, cotton fabrics were coated via impregnation with silver nanoparticles using chitosan (Cs) and (or) chitosan-organosilica (Cs-OSH) solutions as adhesives matrices. The physicochemical properties were studied using UV-VIS spectroscopy, and transmission electron microscopy (TEM) and scanning electron microscope coupled with energy-dispersive X-ray spectroscopy methods (SEM-EDX). The antibacterial activity of the silver-treated fabrics was determined using agar diffusion method. However, nanosize spherical AgNPs were observed in Cs and Cs-OSH solution. The average particle diameter was around 10 nm for Cs/AgNPs sample and close 21 nm for Cs-OSH/AgNPs. Microscopy images showed the deposition of Ag NPs on the surface of cotton fibers. The results indicated that the cotton fibers treated with Cs-OSH/AgNPs solution showed good stability against washing and maintained higher antimicrobial activity even after being exposed to 10 consecutive home laundering conditions. Thus, this work suggests the use of chitosan-organosilicon matrix to improve the bonding between AgNPs and cotton fibers for better and long-term antimicrobial activity.

Antibacterial and Photocatalytic Coatings Based on Cu-Doped ZnO Nanoparticles into Microcellulose Matrix

The paper presents a successful, simple method for the preparation and deposition of new hybrid Cu-doped ZnO/microcellulose coatings on textile fibers, directly from cellulose aqueous solution. The morphological, compositional, and structural properties of the obtained materials were investigated using different characterization methods, such as SEM-EDX, XRD, Raman and FTIR, as well as BET surface area measurements. The successful doping of ZnO NPs with Cu was confirmed by the EDX and Raman analysis. As a result of Cu doping, the hybrid NPs experienced a phase change from ZnO to (Zn_0.9Cu_0.1)O, as shown by the XRD results. All the hybrid NPs exhibited a high degree of crystallinity, as revealed by the very sharp reflections in XRD patterns and suggested also by the Raman results. The evaluation of the very low copper-doping (0.1-1 at.%) effect has shown different behavior trends of the hybrid coatings compared with the starting oxide NPs, for MB and MO photodegradation. Continuous increases up to 92% and 60% for MB and MO degradation, respectively, were obtained at maximum 1 at.%-Cu doping coatings. Strong antibacterial activity against S. aureus and E. coli were observed.

Recent Advances in Functionalization of Cotton Fabrics with Nanotechnology

Nowadays, consumers understand that upgrading their traditional clothing can improve their lives. In a garment fabric, comfort and functional properties are the most important features that a wearer looks for. A variety of textile technologies are being developed to meet the needs of customers. In recent years, nanotechnology has become one of the most important areas of research. Nanotechnology’s unique and useful characteristics have led to its rapid expansion in the textile industry. In the production of high-performance textiles, various finishing, coating, and manufacturing techniques are used to produce fibers or fabrics with nano sized (10⁻⁹) particles. Humans have been utilizing cotton for thousands of years, and it accounts for around 34% of all fiber production worldwide. The clothing industry, home textile industry, and healthcare industry all use it extensively. Nanotechnology can enhance cotton fabrics’ properties, including antibacterial activity, self-cleaning, UV protection, etc. Research in the field of the functionalization of nanotechnology and their integration into cotton fabrics is presented in the present study.

Preparation and Antibacterial Activity of Nano Copper Oxide- Loaded Zeolite 10X

Copper oxide nanosheet-loaded zeolite 10X nanocomposites (CuO-zeolite NCs) were successfully prepared by modifying zeolite 10X with CuSO₄ aqueous solution. The formation of copper oxide nanosheets on the surface of zeolite 10X was observed by SEM. The thickness of CuO nanosheets was about 30–40 nm, and the width ranged from 200 nm to 300 nm. The XRD patterns showed that the new diffraction peaks of copper oxide appeared at 35.6° and 38.8°. According to the XPS results, the Cu 2p_3/2 and Cu 2p_1/2 peaks in CuO-zeolite NC were centered at 934.1 eV and 953.8 eV, which could be attributed to Cu(II). The EDS analysis revealed that the energy spectra of calcium gradually decreased as the copper ion concentration increased during the preparation of CuO-zeolite NCs. Meanwhile, the energy spectra of copper increased gradually, and the highest content of copper in CuO-zeolite NCs reached 22.35 wt.%. The BET surface areas of zeolite 10X and CuO-zeolite NCs were 587 and 363 m²/g, respectively, based on the N₂ adsorption–desorption experiment. The antibacterial activities of CuO-zeolite NC were evaluated using Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). The antibacterial activities were related to both copper ion content in CuO-zeolite NCs and the particle size of copper oxide. The results showed that nano CuO-loaded zeolite 10X inhibited the activity of E. coli and S. aureus. CuO-zeolite NCs are expected to be further used in antifouling coating.

Physical and Mechanical Characterization of a Functionalized Cotton Fabric with Nanocomposite Based on Silver Nanoparticles and Carboxymethyl Chitosan Using Green Chemistry

Cotton is the most widely used natural fiber for textiles but its innate capacity to absorb moisture, retain oxygen, and high specific surface area make it more prone to microbial contamination, becoming an appropriate medium for the growth of bacteria and fungi. In recent years, the incorporation of silver nanoparticles in textile products has been widely used due to their broad-spectrum antibacterial activity and low toxicity towards mammalian cells. The aim of the current study is to synthesize and characterize a nanocomposite based on silver nanoparticles and carboxymethyl chitosan (AgNPs-CMC), which was utilized to provide a functional finish to cotton fabric. The scanning electron microscope (SEM) to produce a scanning transmission electron microscope (STEM) image showed that the nanocomposite presents AgNPs with a 5–20 nm size. The X-ray diffraction (XRD) analysis confirmed the presence of silver nanoparticles. The concentration of silver in the functionalized fabric was evaluated by inductively coupled plasma optical emission spectrometry (ICP-OES), which reported an average concentration of 13.5 mg of silver per kg of functionalized fabric. SEM showed that silver nanoparticles present a uniform distribution on the surface of the functionalized cotton fabric fibers. On the other hand, by infrared spectroscopy, it was observed that the functionalized fabric variation (compared to control) had a displaced peak of intensity at 1594.32 cm−1, corresponding to carboxylate anions. Similarly, Raman spectroscopy showed an intense peak at 1592.84 cm−1, which corresponds to the primary amino group of carboxymethyl chitosan, and a peak at 1371.5 cm−1 corresponding to the carboxylic anions. Finally, the physical and mechanical tests of tensile strength and color index of the functional fabric reported that it was no different (p ˃ 0.05) than the control fabric. Our results demonstrate that we have obtained an improved functionalized cotton fabric using green chemistry that does not alter intrinsic properties of the fabric and has the potential to be utilized in the manufacturing of hospital garments.

Fabrication of Silver Nanoparticles Using Cordyline fruticosa L. Leave Extract Endowing Silk Fibroin Modified Viscose Fabric with Durable Antibacterial Property

The current work presented a green synthetic route for the fabrication of silver nanoparticles obtained from aqueous solutions of silver nitrate using Cordyline fruticosa L. leaf extract (Col) as a reducing and capping agent for the first time. The bio-synthesized silver nanoparticles (AgCol) were investigated using UV-visible spectroscopy (UV-vis), transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and thermal gravimetric analysis (TGA). The obtained data demonstrated that AgCol in spherical shape with an average size of 28.5 nm were highly crystalline and well capped by phytocompounds from the Col extract. Moreover, the bio-synthesized AgCol also exhibited the effective antibacterial activities against six pathogenic bacteria, including Escherichia coli (E. coli), Pseudomonas aeruginosa (P. aeruginosa), Salmonella enterica (S. enterica), Staphylococcus aureus (S. aureus), Bacillus cereus (B. cereus) and Enterococcus faecalis (E. faecalis). The AgCol were applied as an antibacterial finishing agent for viscose fabric using a pad-dry curing technique. The AgCol-treated viscose fabrics exhibited a good synergistic antimicrobial activity against E. coli and S. aureus bacteria. Furthermore, the silk fibroin regenerated from Bombyx mori cocoon waste was utilized as an ecofriendly binder for the immobilization of AgCol on the viscose fabric. Thus, the antimicrobial efficacy of the AgCol and fibroin modified viscose fabric still reached 99.99% against the tested bacteria, even after 30 washing cycles. The colorimetric property, morphology, elemental composition, and distribution of AgCol on the treated fabrics were investigated using several analysis tools, including colorimetry, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), atomic absorption spectroscopy (AAS), Kjeldahl, and FTIR. Because of the excellent antimicrobial efficiency and laundering durability, as well as the green synthesis method, the AgCol and fibroin modified viscose fabric could be utilized as an antibacterial material in sportswear and medical textile applications.

Antibacterial and Antifungal Activity of Functionalized Cotton Fabric with Nanocomposite Based on Silver Nanoparticles and Carboxymethyl Chitosan

Cotton is the most widely used natural fiber for textiles; however, the capacity of cotton fibers to absorb large amounts of moisture, retain oxygen, and have a high specific surface area makes them more prone to microbial contamination, becoming an appropriate medium for the growth of bacteria and fungi. In recent years, the incorporation of silver nanoparticles in textile products has been widely used due to their broad-spectrum antibacterial activity and low toxicity towards mammalian cells. The aim of the current study is to continue the assessment of our developed nanocomposite and evaluate the antibacterial and antifungal activity of the nanocomposite based on silver nanoparticles and carboxymethyl chitosan (AgNPs-CMC) against Escherichia coli, Staphylococcus aureus, and Candida albicans, evaluated by the well diffusion method. The antibacterial activity against E. coli and S. aureus was also evaluated by the qualitative method of inhibition zone and the quantitative method of colony counting. Likewise, the antifungal activity of the functionalized fabric against Candida albicans and Aspergillus niger was determined by the inhibition zone method and the antifungal activity method GBT 24346-2009, respectively. The functionalized fabric showed 100% antibacterial activity against E. coli and S. aureus and good antifungal activity against C. albicans and A. niger. Our results indicate that the functionalized fabric could be used in garments for hospital use to reduce nosocomial infections.

Overview of the Influence of Silver, Gold, and Titanium Nanoparticles on the Physical Properties of PEDOT:PSS-Coated Cotton Fabrics

Metallic nanoparticles have been of interest to scientists, and they are now widely used in biomedical and engineering applications. The importance, categorization, and characterization of silver nanoparticles, gold nanoparticles, and titanium nanoparticles have been discussed. Poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate) (PEDOT:PSS) is the most practical and reliable conductive polymer used in the manufacturing of conductive textiles. The effects of metallic nanoparticles on the performance of PEDOT:PSS thin films are discussed. The results indicated that the properties of PEDOT:PSS significantly depended on the synthesis technique, doping, post-treatment, and composite material. Further, electronic textiles known as smart textiles have recently gained popularity, and they offer a wide range of applications. This review provides an overview of the effects of nanoparticles on the physical properties of PEDOT:PSS-coated cotton fabrics.

Core–shell titanium@silica nanoparticles impregnating in poly (itaconic acid)/poly (N-isopropylacrylamide) microgel for multifunctional cellulosic fabrics

A novel method for multi-finishing cellulosic fabrics is based on the consolidation of a thin layer of active material containing micro-gels, titanium nanoparticles and silica. The titanium@silica core–shell particles were synthesized and characterized for their morphological, structural, and compositional properties using X-ray diffraction and scanning electron microscopy. The nanoparticles are approximately 250 nm in size and have a spherical shape. A microgel/titanium@silica nanoparticles composite was prepared mixing with the gel produced from copolymerizing N-isopropyl acrylamide with itaconic acid and then it was characterized. The prepared gel is characterized to be pH and temperature-sensitive. Pad dry cure from the emulsion was used to applied the prepared gel with and without titanium nanoparticles to the cellulosic fabric. Fabric treated with a gel containing and without titanium nanoparticles was tested for antibacterial properties, ultraviolet protection, temperature, and pH sensitivity. According to the evaluation, treated fabric with titanium nanoparticles has better antibacterial, ultraviolet protection, and is more sensitive to pH and temperature than treated fabric without titanium nanoparticles, and both treated fabrics outperform the untreated one.

Microwave-assisted synthesis of Ag/ZnO nanoparticles using Averrhoa carambola fruit extract as the reducing agent and their application in cotton fabrics with antibacterial and UV-protection properties

This is the first time Averrhoa carambola fruit extract has been used as a reducing agent to synthesize Ag/ZnO composites for coating cotton to develop antibacterial activity and UV protection under domestic microwave irradiation. The effects of the molar concentration of silver nitrate solutions, applied power, reaction duration, and pH on the yield of nanoparticles were determined. The treated fabrics were subjected to the investigation of surface morphology and chemical structure using SEM and EDX techniques, respectively. The antibacterial activity of the ZnO NPs and the Ag/ZnO nanocomposite coated on cotton fabric was evaluated against E. coli and S. aureus using the agar well diffusion method. The results revealed good antibacterial activity in the cotton fabric treated with the Ag-doped ZnO composite. The stability of the Ag/ZnO nanocomposite coated fabrics was determined by a wash durability test, the results of which demonstrated that this fabric could retain good antibacterial activity even after 20 wash cycles. The UV-blocking capacity of the treated fabrics was evaluated based on the ultraviolet protection factor (UPF) value determined in the range of 280–400 nm. The UPF value determined for the Ag/ZnO-coated fabric was 69.67 ± 1.53, which indicated an excellent ability to block UV radiation. Collectively, these results demonstrated the Ag/ZnO nanocomposite prepared in the present study as a promising material for preparing textiles with good antibacterial activity and UV protection.

This is the first time Averrhoa carambola fruit extract has been used as a reducing agent to synthesize Ag/ZnO composites for coating cotton to develop antibacterial activity and UV protection under domestic microwave irradiation.

Colorful and facile in situ nanosilver coating on sisal/cotton interwoven fabrics mediated from European larch heartwood

This study reports on a novel coloration approach for sisal/cotton interwoven fabric via in situ synthesis of European larch (Larix decidua) heartwood-anchored sustainable nanosilver. The heartwood extracts functioned as the reducing and stabilizing agent in reaction systems. The deposited silver nanoparticles (AgNPs) over the fabric surfaces displayed brilliant coloration effects with improved fastness ratings and color strengths (K/S). The successful depositions of nanosilvers were quantified and increasing trends in K/S values with the increase in silver precursor loading were discovered. The concentrations of AgNPs deposited on fabric surfaces were found to be 16 mg/L, 323 mg/L, and 697 mg/L, which were measured through an iCP OES (atomic absorption spectroscopy) test. The K/S values obtained for different loadings of silver precursors (0.5, 1.5, and 2.5 mM (w/v)) are 2.74, 6.76, and 8.96. Morphological studies of the control and AgNP-treated fabrics also displayed a uniform and homogeneous distribution of AgNPs over the fabric surfaces. FTIR (Fourier transform infrared spectroscopy) studies of the sustainably developed materials further confirms the successful bonding between the fabrics and AgNPs. Furthermore, stability against temperature was also noticed as per TGA (thermogravimetric analysis) and DTG (derivative TG) analysis although there was a slight decline from the control sisal/cotton interwoven fabrics observed. Statistically, regression analysis and ANOVA tests were conducted to understand the significance of increased nanosilver loading on sisal/cotton interwoven fabrics. In summary, the perceived results demonstrated successful coloration and functionalization of sisal/cotton interwoven fabrics through green AgNPs, which could indicate a new milestone for industrial production units.

Multifunctional 3D cationic starch/nanofibrillated cellulose/silver nanoparticles nanocomposite cryogel: Synthesis, adsorption, and antibacterial characteristics

We report a new 3D nanocomposite cryogel combines the advantages of cationic starch (Cs), nanofibrillated cellulose (NFC) and silver nanoparticles (Ag NPs). Cs was the main component of the cryogel while NFC was used as a filling agent to enhance the mechanical properties of the produced cryogel. Both Cs and NFC endow the cryogel with adsorption properties while Ag NPs enhances its antibacterial properties. Ag NPs was green synthesized with the aid of microwave radiation using NFC as reducing and stabilizing agent. The prepared Ag particles were free of impurities with sizes <10 nm and good stability in solution. Two different concentrations of the prepared Ag NPs were added to a mixture of Cs and NFC and subjected to freeze drying to get porous cryogel (3D microstructure). The Ag NPs free cryogel has highly porosity smooth surface with large surface area. Adding Ag NPs decreased these features and increased the 3D roughness. Optimum adsorption of reactive blue 49 was observed after 30 min of contact with 1.5 g/L of the cryogel at pH 1. The adsorption kinetics and isotherm were best described by the pseudo-first-order and Freundlich equations, respectively. All prepared cryogels have notable antibacterial properties that were significantly improved by adding Ag NPs. Overall, the new 3D composite cryogel can efficiently remove dyes and bacteria from wastewater.

Morphological features and mechanical properties of nanofibers scaffolds of polylactic acid modified with hydroxyapatite/CdSe for wound healing applications

Ternary nanocomposites, including graphene oxide (GO), hydroxyapatite (HAP), and cadmium selenite (CdSe) have been encapsulated into nanofibrous scaffolds of polylactic acid. These compositions were indexed as HAP@PLA (C1), CdSe@PLA (C2), HAP/CdSe@PLA (C3), HAP/GO@PLA (C4), and HAP/CdSe/GO@PLA (C5). Structural confirmation is executed by XRD and XPS techniques, while FESEM performs morphological characteristics. CdSe and GO dopants cause a significant increase in nanofiber diameter, HAP/GO@PLA (C4), showing thin surface fibers with fiber diameter up to 3.1 μm, followed by HAP/CdSe/GO@PLA (C4) composite that belongs to filament size up to 2.1 μm. On the other hand, the mechanical properties reveal that the dual dopant composites HAP/CdSe@PLA (C3) and HAP/GO@PLA (C4) hit the maximum tensile fracture values with 1.49 ± 0.3 and 0.99 ± 0.2 MPa. Further, the ternary C5 composite represents the lowest contact angle of 86.1 ± 3.7°. The antibacterial activity increased from 32.4 ± 9.7 and 28.4 ± 6.5% to be 85.3 ± 4.6 and 88.1 ± 5.6% for C1 and C5, respectively, against both E. coli and S. aureus in dark conditions. Moreover, the antibacterial potency enhanced from 75.4 ± 7.6 to be 83.5 ± 6.5 from dark to light conditions against E. coli for the composition of PLA containing the binary composition of HAP/CdSe.

Antibacterial potency, cell viability and morphological implications of copper oxide nanoparticles encapsulated into cellulose acetate nanofibrous scaffolds

It is generally believed that the most challenging impediment for the utilization of cellulose acetate (CA) in the medical field is its hydrophobicity and disability to poison the harmful microbes. Therefore, in this contribution, we aimed to prepare an environmentally scaffold-based CA loaded with copper nanoparticles (CuONPs), which are expected to not only improve the hydrophilicity of the prepared nanofibers, but also have an effective ability to kill such harmful and infectious microbes that are abundant in wounds. The obtained results attested that the generated nanofibers became thicker with increasing the content of CuONPs in CA nanofibers. The roughness average increased from 143.2 to 157.1 nm, whereas the maximum height of the roughness (Rt) increased from 400.8 to 479.9 nm as going from the lowest to the highest content of CuONPs. Additionally, the contact angle of the prepared nanofibers decreased from 105.3° (CA alone) to 85.4° for CuONPs@CA. Significantly, biological studies revealed that cell viability and anti-bacterial potency were improved upon incorporating CuONPs into CA solution. Correspondingly, their inhibition zones reached 18 ± 3 mm, and 16 ± 2 mm for nanofibrous scaffolds having 12.0CuO@CA, besides raising the cell viability from 91.3 ± 4% to 96.4 ± 4% for 0.0CuO@CA, and 12.0CuO@CA, respectively, thereby implying that the fabricated CuONPs@CA nanocomposite has biocompatibility towards fibroblast cells. Thus, introducing biological activity into CA nanofibers via loading with CuONPs makes it suitable for numerous biomedical applications, particularly as an environmentally benign wound dressing fibers.

Recent Advances on Antimicrobial and Anti-Inflammatory Cotton Fabrics Containing Nanostructures

Hydrophilic cotton textiles, used in hospitals and sportswear, are prone to the growth of microorganisms (bacteria, fungi) resulting in hygiene and health risks. Thus, healthcare concerns have motivated the interest for the development of multifunctional antimicrobial cotton fabrics. Moreover, cotton textiles are also used in medical applications such as wound dressings. Their functionalization with anti-inflammatory agents is desirable in order to accelerate cicatrisation in the treatment of chronic wounds. This review summarizes recent advances (from January 2016 to January 2021) on the modification and coating of cotton fabrics with nanostructures (mainly metal and metal oxide nanoparticles, functionalized silica nanoparticles) to provide them antimicrobial (antibacterial and antifungal) and anti-inflammatory properties.

Bioactive Ibuprofen-Loaded PLGA Coatings for Multifunctional Surface Modification of Medical Devices

To modulate the biofunctionality of implantable medical devices commonly used in clinical practice, their surface modification with bioactive polymeric coatings is an attractive and successful emerging strategy. Biodegradable coatings based on poly(lactic acid-co-glycolic acid), PLGA, represent versatile and safe candidates for surface modification of implantable biomaterials and devices, providing additional tunable ability for topical delivery of desired therapeutic agents. In the present study, Ibuprofen-loaded PLGA coatings (PLGA/IBUP) were obtained by using the dip-coating and drop-casting combined protocol. The composite materials demonstrated long-term drug release under biologically simulated dynamic conditions. Reversible swelling phenomena of polymeric coatings occurred in the first two weeks of testing, accompanied by the gradual matrix degradation and slow release of the therapeutic agent. Irreversible degradation of PLGA coatings occurred after one month, due to copolymer's hydrolysis (evidenced by chemical and structural modifications). After 30 days of dynamic testing, the cumulative release of IBUP was ~250 µg/mL. Excellent cytocompatibility was revealed on human-derived macrophages, fibroblasts and keratinocytes. The results herein evidence the promising potential of PLGA/IBUP coatings to be used for surface modification of medical devices, such as metallic implants and wound dressings.

The "Maskne" microbiome - pathophysiology and therapeutics

"Maskne" is a new term coined during the 2020 COVID-19 pandemic. It refers to a subset of acne mechanica, deserving consideration in view of widespread reusable fabric mask-wearing to control the pandemic worldwide. Understanding of underlying pathophysiology directly relates to the novel skin microenvironment and textile-skin friction created by mask-wearing, distinct from nontextile-related acne mechanica previously linked to wearing of headgear. Specifically, the occlusive microenvironment leads to microbiome dysbiosis, which is linked to various dermatological conditions. Additional textile-skin interactions include factors such as breathability, stickiness sensations, moisture saturation, and hygiene maintenance. Increased skin temperatures can trigger sweat/heat-related dermatoses, and ear loops potentially trigger pressure-induced dermatoses. Important therapeutic considerations include increased skin irritation potential of conventional acne treatments under occlusion, exacerbation of chronic dermatoses, that is, perioral dermatitis, rosacea, and eczema, and susceptibility of these same patient groups to heightened discomfort with mask-wearing. Cotton, as the traditional fabric of choice for dermatology patients, has limited benefits in the context of face masks - increased subjective discomfort relates to increased moisture saturation and stickiness, inevitable because of high biofluid load of the nasal and oral orifices. Prolonged textile-skin contact time, directly proportional to the risk of maskne, can be an opportunity for the application of biofunctional textiles.

Antimicrobial Properties of the Ag, Cu Nanoparticle System

Microbes, including bacteria and fungi, easily form stable biofilms on many surfaces. Such biofilms have high resistance to antibiotics, and cause nosocomial and postoperative infections. The antimicrobial and antiviral behaviors of Ag and Cu nanoparticles (NPs) are well known, and possible mechanisms for their actions, such as released ions, reactive oxygen species (ROS), contact killing, the immunostimulatory effect, and others have been proposed. Ag and Cu NPs, and their derivative NPs, have different antimicrobial capacities and cytotoxicities. Factors, such as size, shape and surface treatment, influence their antimicrobial activities. The biomedical application of antimicrobial Ag and Cu NPs involves coating onto substrates, including textiles, polymers, ceramics, and metals. Because Ag and Cu are immiscible, synthetic AgCu nanoalloys have different microstructures, which impact their antimicrobial effects. When mixed, the combination of Ag and Cu NPs act synergistically, offering substantially enhanced antimicrobial behavior. However, when alloyed in Ag-Cu NPs, the antimicrobial behavior is even more enhanced. The reason for this enhancement is unclear. Here, we discuss these results and the possible behavior mechanisms that underlie them.

Textiles Functionalized with ZnO Nanoparticles Obtained by Chemical and Green Synthesis Protocols: Evaluation of the Type of Textile and Resistance to UV Radiation

The study evaluates five types of commercial textiles with different cotton and polyester contents widely used in the garment industry. These textile samples have been subjected to treatment by the exhaustion method using zinc oxide nanoparticles (NP ZnO) (textile functionalization) with the aim of improving their efficiency in blocking UV radiation. The ZnO nanoparticles have been obtained by two methods: The green or also called biosynthesis (using the extract of Coriandrum sativum as an organic reducing agent), and the chemical method (using NaOH as an inorganic reducing agent). The results related to the green method show having achieved a defined geometric configuration with an average size of 97.77 nm (SD: 9.53). On the contrary, the nanostructures obtained by the chemical method show pentagonal configurations with average sizes of 113 nm (SD: 6.72). The textiles functionalized with NP ZnO obtained by biosynthesis showed a better efficiency in blocking ultraviolet radiation (UV).

Nanofibers of cellulose acetate containing ZnO nanoparticles/graphene oxide for wound healing applications

A combination of nanostructured zinc oxide (ZnO) or graphene oxide or both of them with cellulose acetate (CA) enhances a new functionality of nanofibers aiming to improve bio-composite materials for wound healing application. The obtained nanofibers have been investigated using XRD, FTIR, and FESEM. It was observed that the maximum height of the roughness increased from 253 to 651.9 nm for both GO and ZnO/GO in the powdered phase, while it plunged from 613 to 482 nm and developed to 801 nm for ZnO@CA, GO@CA, and ZnO/GO@CA, receptively. Further, the mechanical properties of the obtained scaffolds have been tested and displayed a tremendous variation of tensile strength from 5.44 ± 0.81 to 12.87 ± 0.93 and 8.82 ± 1.2 MPa, while the toughness increased from 23.29 ± 1.4 to 68.95 ± 4.5 and 57.75 ± 3.6 MJ/m³ for ZnO@CA, GO@CA and ZnO/GO@CA, receptively. Moreover, the cell viability was investigated and showed a progression of 97.38 ± 3.9% for ZnO/GO@CA. Furthermore, the adhesion of human fibroblasts cell line towards the obtained nanofibrous scaffolds were examined and displayed that cells were proliferated and spread considerably through the scaffolds, whereas their filopodia have followed the morphology of the fibers.

Cellulosic fabric treated with hyperbranched polyethyleneimine derivatives for improving antibacterial, dyeing, pH and thermo-responsive performance

Having cotton fabrics with multifunctional properties is of the most research focused on using either different processes or new and different materials. Improving thermo - responsive and antibacterial properties of cotton fabrics decorated with silver nanoparticles and nanogel has been investigated. During this research silver nanoparticles (AgNPs) have been in situ prepared using poly(N-isopropyl acrylamide)/polyethyleneimine microgel. Prepared particles have been characterized, visualized their morphological structure and their particle through microscopic analysis, which proved that their particle size was in range of (6-10 nm). The decorated gel with silver nanoparticles has been functionalized with silicone compounds to produce hybrid material. The produced gel has been characterized for its pH, temperature, textural, rheological, antimicrobial, cytotoxicity, and conductivity properties. The functional properties of the treated and untreated fabrics have been investigated, and the results proved that treated fabric has conductivity, antibacterial, pH and thermo-responsive properties.

Fabrication of silver phosphate-ilmenite nanocomposites supported on glycol chitosan for visible light-driven degradation, and antimicrobial activities

Recently, photo-degradation process under ultraviolet-light irradiation is being used as a substantial treatment method for the removal of environmental pollution. In this study, a silver phosphate-ilmenite (Ag₃PO₄-FeTiO₃) hetero structure supported on glycol chitosan catalyst was completely prepared, also, and its structural, and optical properties were characterized. Meantime, scanning electron microscopy, X-ray diffraction, X-ray photoelectron, and UV-vis spectra were applied. The Ag₃PO₄-FeTiO₃/glycol chitosan catalyst was used to degrade metronidazole under visible-light irradiation. The degradation rate of metronidazole in 25 min by Ag₃PO₄-FeTiO₃/glycol chitosan nanocomposites was found to be 99.2% under UV light irradiation, which was higher than that by Ag₃PO₄-FeTiO₃ (72.24%) and FeTiO₃ (35.5%), respectively. The active species trapping test of Ag₃PO₄-FeTiO₃/glycol chitosan indicated that ·OH and ·O₂^- participated during the reaction. The diffusion method was evaluated to appraise the bactericidal activity of the synthesized nanomaterials when tested against both Staphylococcus aureus and Escherichia coli bacteria, with or without LED-light irradiation. The antibacterial tests show higher inhibition zones under light illumination as compared to dark conditions. The antifungal properties of the prepared nanomaterials were analyzed by fungi (Aspergillus niger, and Fusarium solani) using disc diffusion analysis. It was confirmed that the prepared nanomaterials have the best antifungal agent as compared to the standard antibiotics. When the Ag₃PO₄-FeTiO₃/glycol chitosan was used, the amount of inhibition zone was enhanced.

Ficus carica assisted green synthesis of metal nanoparticles: A mini review

•

Ficuc carica (Moraceae) has widely been explored for the green synthesis of metallic nanoparticles.

•

Silver nanoparticles were found active against several Gram positive, Gram Negative bacteria and some fungal strains.

•

Stannic oxide nanoparticles coated glassy carbon electrode determined Hg²⁺ ions sharply.

•

Palladium nanoparticles decorated reduced grapheme oxide could be used in Suzuki coupling reaction.

•

Phytochmeicals present in Ficus carica act as both reducing and capping agent for stabilized metallic nanoparticles.

In last decade, several attempts were made for the green and economic synthesis of metallic nanoparticle having profound applications in all the arears of science. Ficus carica (Moraceae) is a deciduous plant with edible fruits. It has been widely explored for synthesis of various metallic nanoparticles like silver, gold, stannic oxide, copper oxide, iron oxide, palladium nanoparticles using extracts of Ficus carica leafs or fruits. Phytochemical prospection so far made on Ficus carica leafs or fruits revealed the presence of variety of compounds including organic acids, fatty acids, amino acids, lower terpenes, flavonoids, coumarins etc. Researchers prepared metallic nanoparticles; characterised them by advanced analytical techniques and evaluated for particular application including, antimicrobial activity of silver nanoparticles; improved determination of mercury using stannic oxide nanoparticles coated glassy carbon electrode; carrying of chemical reaction using reduced graphene oxide decorated with palladium nanoparticles as catalyst. On this review, it can be concluded that due to presence of variety of phytocompounds, Ficus caricaplant can be used in preparation of metallic nanoparticles which could be useful in various scientific domains.

An Updated Review on Silver Nanoparticles in Biomedicine

Silver nanoparticles (AgNPs) represent one of the most explored categories of nanomaterials for new and improved biomaterials and biotechnologies, with impressive use in the pharmaceutical and cosmetic industry, anti-infective therapy and wound care, food and the textile industry. Their extensive and versatile applicability relies on the genuine and easy-tunable properties of nanosilver, including remarkable physicochemical behavior, exceptional antimicrobial efficiency, anti-inflammatory action and antitumor activity. Besides commercially available and clinically safe AgNPs-based products, a substantial number of recent studies assessed the applicability of nanosilver as therapeutic agents in augmented and alternative strategies for cancer therapy, sensing and diagnosis platforms, restorative and regenerative biomaterials. Given the beneficial interactions of AgNPs with living structures and their nontoxic effects on healthy human cells, they represent an accurate candidate for various biomedical products. In the present review, the most important and recent applications of AgNPs in biomedical products and biomedicine are considered.

Toward understanding the purely geometric effects of silver nanoparticles on potential application as ocular therapeutics via treatment of bacterial keratitis

Understanding a complex interaction between therapeutic nanoparticles and biological entities is crucially important for the development of effective disease treatments in the modern nanopharmaceuticals and nanomedicines. Herein, we present a strategy to thoroughly assess geometrical impacts of silver nanoparticles (AgNPs, one of the most promising nanotherapeutic agents) on their biological activities toward treatment of Staphylococcus aureus (S. aureus)-induced keratitis. Specifically, three types of differently shaped AgNPs including silver nanorods (R-Ag), silver nanotriangles (T-Ag), and silver nanospheres (SAg) are employed and interferences of particle surface area and functionality are eliminated to reflect purely geometric effects. Ocular biocompatibility studies on rabbit corneal keratocytes reveal that SAg is the least cytotoxic agent while R-Ag, because of its strongest cellular uptake, induces highest cytotoxic levels. Moreover, SAg is demonstrated to outperform R-Ag and T-Ag in killing S. aureus, possibly due to a predominance of specific particle density and high-atom-density {111} facets of the SAg when interacting with the bacteria. In contrast, owing to its predominance of sharp-tip effects on vascular endothelial cells, R-Ag can suppress blood vessel development in cornea at a greatest extent. In a rabbit model of S. aureus-induced keratitis, intrastromal administration of the differently shaped AgNPs exhibits critical roles of the particle geometry at comparable conditions (i.e., total surface area and functionality) in attenuating progression of S. aureus-induced keratitis. As a compromise among ocular biocompatibility, anti-bacterial activity, and anti-angiogenic capability, SAg shows as the most effective agent that could repair infectious corneal tissues 1.2 and 4-fold greater than the anisotropic counterparts (R-Ag and T-Ag). These findings therefore suggest a promising strategy for a clear-cut evaluation on geometric effects of therapeutic nanoparticles toward preclinical treatment of eye-related microbial infections.

Trimetallic Nanoparticles: Greener Synthesis and Their Applications

Nanoparticles (NPs) and multifunctional nano-sized materials have significant applications in diverse fields, namely catalysis, sensors, optics, solar energy conversion, cancer therapy/diagnosis, and bioimaging. Trimetallic NPs have found unique catalytic, active food packaging, biomedical, antimicrobial, and sensing applications; they preserve an ever-superior level of catalytic activities and selectivity compared to monometallic and bimetallic nanomaterials. Due to these important applications, a variety of preparation routes, including hydrothermal, microemulsion, selective catalytic reduction, co-precipitation, and microwave-assisted methodologies have been reported for the syntheses of these nanomaterials. As the fabrication of nanomaterials using physicochemical methods often have hazardous and toxic impacts on the environment, there is a vital need to design innovative and well-organized eco-friendly, sustainable, and greener synthetic protocols for their assembly, by applying safer, renewable, and inexpensive materials. In this review, noteworthy recent advancements relating to the applications of trimetallic NPs and nanocomposites comprising these NPs are underscored as well as their eco-friendly and sustainable synthetic preparative options.