Rootstock-induced scion resistance against tobacco mosaic virus is associated with the induction of defence-related transcripts and graft-transmissible mRNAs

Grafting is a common horticultural practice used to confer desirable traits between rootstock and scion, including disease resistance. To investigate graft-conferred resistance against viral diseases a novel heterografting system was developed using Nicotiana benthamiana scions grafted onto different tomato rootstocks. N. benthamiana is normally highly susceptible to tobacco mosaic virus (TMV) infection. However, specific tomato rootstock varieties were found to confer a range of resistance levels to N. benthamiana scions inoculated with TMV. Conferred resistance was associated with delays in virus accumulation and the reduction in virus spread. RNA sequencing analysis showed the enrichment of transcripts associated with disease resistance and plant stress in N. benthamiana scions grafted onto resistance-inducing tomato rootstocks. Genome sequencing of resistance- and nonresistance-conferring rootstocks was used to identify mobile tomato transcripts within N. benthamiana scions. Within resistance-induced N. benthamiana scions, enriched mobile tomato transcripts were predominantly associated with defence, stress, and abscisic acid signalling when compared to similar scions grafted onto nonresistance-inducing rootstock. Combining these findings suggests that graft-induced resistance is modulated by rootstock scion transcriptional responses and rootstock-specific mobile transcripts.

Highly stable, antiviral, antibacterial cotton textiles via molecular engineering

Cotton textiles are ubiquitous in daily life and are also one of the primary mediums for transmitting viruses and bacteria. Conventional approaches to fabricating antiviral and antibacterial textiles generally load functional additives onto the surface of the fabric and/or their microfibres. However, such modifications are susceptible to deterioration after long-term use due to leaching of the additives. Here we show a different method to impregnate copper ions into the cellulose matrix to form a copper ion-textile (Cu-IT), in which the copper ions strongly coordinate with the oxygen-containing polar functional groups (for example, hydroxyl) of the cellulose chains. The Cu-IT displays high antiviral and antibacterial performance against tobacco mosaic virus and influenza A virus, and Escherichia coli, Salmonella typhimurium, Pseudomonas aeruginosa and Bacillus subtilis bacteria due to the antimicrobial properties of copper. Furthermore, the strong coordination bonding of copper ions with the hydroxyl functionalities endows the Cu-IT with excellent air/water retainability and superior mechanical stability, which can meet daily use and resist repeated washing. This method to fabricate Cu-IT is cost-effective, ecofriendly and highly scalable, and this textile appears very promising for use in household products, public facilities and medical settings.

Delivery of CRISPR-Cas12a Ribonucleoprotein Complex for Genome Editing in an Embryogenic Citrus Cell Line

Clustered regularly interspaced short palindromic repeats (CRISPR) technology is a powerful genome editing tool. Recently developed CRISPR-Cas12a system confers several advantages over CRISPR-Cas9, making it ideal for use in plant genome editing and crop improvement. While traditional transformation methods based on plasmid delivery pose concerns associated with transgene integration and off-target effects, CRISPR-Cas12a delivered as ribonucleoproteins (RNPs) can effectively alleviate these potential issues. Here we present a detailed protocol for LbCas12a-mediated genome editing using RNP delivery in Citrus protoplasts. This protocol provides a comprehensive guideline for RNP component preparation, RNP complex assembly and delivery, and editing efficiency assessment.

Highly Efficient Genome Editing in Plant Protoplasts by Ribonucleoprotein Delivery of CRISPR-Cas12a Nucleases

Clustered Regularly Interspaced Short Palindromic Repeats (CRISPR) mediated genome editing is a powerful approach for crop improvement. Traditional transformation methods based on plasmid delivery pose concerns associated with transgene integration and off-target effects. CRISPR delivered as ribonucleoproteins (RNPs) can prevent exogenous DNA integration, minimize off-target effects, and reduce cellular toxicity. Although RNP delivered CRISPR genome editing has been demonstrated in many plant species, optimization strategies that yield high editing efficiencies have not been thoroughly investigated. Using rice and citrus protoplast systems we demonstrated highly efficient genome editing using Cas12a delivered as RNPs. Four Cas12a variants, including LbCas12a, LbCas12a-E795L, AsCas12a, and AsCas12a Ultra, were investigated. Nearly 100% editing efficiency was observed for three out of four target sites by LbCas12a, LbCas12a-E795L, and AsCas12a Ultra, as measured by restriction fragment length polymorphism (RFLP) and verified by next generation sequencing of PCR amplicons. RNP delivery resulted in higher editing efficiencies than plasmid delivery at 32°C and 25°C. LbCas12a and LbCas12a-E795L demonstrated increased editing efficiencies in comparison to AsCas12a and AsCas12a Ultra, especially when used at lower RNP concentrations. In addition, we discovered that a 1:1 Cas12a:crRNA molar ratio is sufficient to achieve efficient genome editing. Nuclear localization signals (NLSs) are essential for efficient RNP-based genome editing. However, the different crRNA modifications tested did not significantly improve genome editing efficiency. Finally, we applied the Cas12a RNP system in citrus protoplasts and obtained similarly high editing efficiencies at the target site. Our study provides a comprehensive guideline for Cas12a-mediated genome editing using RNP delivery in plant cells, setting the foundation for the generation of transgene-free genome edited plants.

Reprogramming Virus Coat Protein Carboxylate Interactions for the Patterned Assembly of Hierarchical Nanorods

The self-assembly system of the rod-shaped tobacco mosaic virus (TMV) has been studied extensively for nanoscale applications. TMV coat protein assembly is modulated by intersubunit carboxylate groups whose electrostatic repulsion limits the assembly of virus rods without incorporating genomic RNA. To engineer assembly control into this system, we reprogrammed intersubunit carboxylate interactions to produce self-assembling coat proteins in the absence of RNA and in response to unique pH and ionic environmental conditions. Specifically, engineering a charge attraction at the intersubunit E50-D77 carboxylate group through a D77K substitution stabilized the coat proteins assembly into virus-like rods. In contrast, the reciprocal E50K modification alone did not confer virus-like rod assembly. However, a combination of R46G/E50K/E97G substitutions enabled virus-like rod assembly. Interestingly, the D77K substitution displays a unique pH-dependent assembly-disassembly profile, while the R46G/E50K/E97G substitutions confer a novel salt concentration dependency for assembly control. In addition, these unique environmentally controlled coat proteins allow for the directed assembly and disassembly of chimeric virus-like rods both in solution and on substrate-attached seed rods. Combined, these findings provide a controllable means to assemble functionally discrete virus-like rods for use in nanotechnology applications.

Dynamic changes impact the plum pox virus population structure during leaf and bud development

Plum pox virus (PPV) is a worldwide threat to stone fruit production. Its woody perennial hosts provide a dynamic environment for virus evolution over multiple growing seasons. To investigate the impact seasonal host development plays in PPV population structure, next generation sequencing of ribosome associated viral genomes, termed translatome, was used to assess PPV variants derived from phloem or whole leaf tissues over a range of plum leaf and bud developmental stages. Results show that translatome PPV variants occur at proportionately higher levels in bud and newly developing leaf tissues that have low infection levels while more mature tissues with high infection levels display proportionately lower numbers of viral variants. Additional variant analysis identified distinct groups based on population frequency as well as sets of phloem and whole tissue specific variants. Combined, these results indicate PPV population dynamics are impacted by the tissue type and developmental stage of their host.

Viral Hacks of the Plant Vasculature: The Role of Phloem Alterations in Systemic Virus Infection

For plant viruses, the ability to load into the vascular phloem and spread systemically within a host is an essential step in establishing a successful infection. However, access to the vascular phloem is highly regulated, representing a significant obstacle to virus loading, movement, and subsequent unloading into distal uninfected tissues. Recent studies indicate that during virus infection, phloem tissues are a source of significant transcriptional and translational alterations, with the number of virus-induced differentially expressed genes being four- to sixfold greater in phloem tissues than in surrounding nonphloem tissues. In addition, viruses target phloem-specific components as a means to promote their own systemic movement and disrupt host defense processes. Combined, these studies provide evidence that the vascular phloem plays a significant role in the mediation and control of host responses during infection and as such is a site of considerable modulation by the infecting virus. This review outlines the phloem responses and directed reprograming mechanisms that viruses employ to promote their movement through the vasculature.

Translatome Profiling of Plum Pox Virus-Infected Leaves in European Plum Reveals Temporal and Spatial Coordination of Defense Responses in Phloem Tissues

Plum pox virus (PPV) is the causative agent of sharka, a devastating disease of stone fruits including peaches, apricots, and plums. PPV infection levels and associated disease symptoms can vary greatly, depending upon the virus strain, host species, or cultivar as well as developmental age of the infected tissues. For example, peaches often exhibit mild symptoms in leaves and fruit while European plums typically display severe chlorotic rings. Systemic virus spread into all host tissues occurs via the phloem, a process that is poorly understood in perennial plant species that undergo a period of dormancy and must annually renew phloem tissues. Currently, little is known about how phloem tissues respond to virus infection. Here, we used translating ribosome affinity purification followed by RNA sequencing to identify phloem- and nonphloem-specific gene responses to PPV infection during leaf development in European plum (Prunus domestica L.). Results showed that, during secondary leaf morphogenesis (4- and 6-week-old leaves), the phloem had a disproportionate response to PPV infection with two- to sixfold more differentially expressed genes (DEGs) in phloem than nonphloem tissues, despite similar levels of viral transcripts. In contrast, in mature 12-week-old leaves, virus transcript levels dropped significantly in phloem tissues but not in nonphloem tissues. This drop in virus transcripts correlated with an 18-fold drop in phloem-specific DEGs. Furthermore, genes associated with defense responses including RNA silencing were spatially coordinated in response to PPV accumulation and were specifically induced in phloem tissues at 4 to 6 weeks. Combined, these findings highlight the temporal and spatial dynamics of leaf tissue responses to virus infection and reveal the importance of phloem responses within a perennial host.

Identification of phloem-associated translatome alterations during leaf development in Prunus domestica L

Phloem plays a fundamental role in plants by transporting hormones, nutrients, proteins, RNAs, and carbohydrates essential for plant growth and development. However, the identity of the underlying phloem genes and pathways remain enigmatic especially in agriculturally important perennial crops, in part, due to the technical difficulty of phloem sampling. Here, we used two phloem-specific promoters and a translating ribosome affinity purification (TRAP) strategy to characterize the phloem translatome during leaf development at 2, 4, and 6 weeks post vernalization in plum (Prunus domestica L.). Results provide insight into the changing phloem processes that occur during leaf development. These processes included the early activation of DNA replication genes that are likely involved in phloem cell division during leaf expansion, as well as the upregulation of phloem genes associated with sink to source conversion, induction of defense processes, and signaling for reproduction. Combined these results reveal the dynamics of phloem gene expression during leaf development and establish the TRAP system as a powerful tool for studying phloem-specific functions and responses in trees.

Localized Three-Dimensional Functionalization of Bionanoreceptors on High-Density Micropillar Arrays via Electrowetting

In this work, we introduce an electrowetting-assisted 3-D biofabrication process allowing both complete and localized functionalization of bionanoreceptors onto densely arranged 3-D microstructures. The integration of biomaterials with 3-D microdevice components offers exciting opportunities for communities developing miniature bioelectronics with enhanced performance and advanced modes of operation. However, most biological materials are stable only in properly conditioned aqueous solutions, thus the water-repellent properties exhibited by densely arranged micro/nanostructures (widely known as the Cassie-Baxter state) represent a significant challenge to biomaterial integration. Here, we first investigate such potential limitations using cysteine-modified tobacco mosaic virus (TMV1cys) as a model bionanoreceptor and a set of Au-coated Si-micropillar arrays (μPAs) of varying densities. Furthermore, we introduce a novel biofabrication system adopting electrowetting principles for the controlled localization of TMV1cys bionanoreptors on densely arranged μPAs. Contact angle analysis and SEM characterizations provide clear evidence to indicate structural hydrophobicity as a key limiting factor for 3-D biofunctionalization and for electrowetting as an effective method to overcome this limitation. The successful 3-D biofabrication is confirmed using SEM and fluorescence microscopy that show spatially controlled and uniform assemblies of TMV1cys on μPAs. The increased density of TMV1cys per device footprint produces a 7-fold increase in fluorescence intensity attributed to the μPAs when compared to similar assemblies on planar substrates. Combined, this work demonstrates the potential of electrowetting as a unique enabling solution for the controlled and efficient biofabrication of 3-D-patterned micro/nanodomains.

Fabrication of Tobacco Mosaic Virus-Like Nanorods for Peptide Display

Virus-like particles (VLPs) are genome-free protein shells assembled from virus coat proteins (CPs). The uniform and nanoscale structure of VLPs combined with their noninfectious nature have made them ideal candidates for the display of functional peptides. While the vast majority of VLPs are derived from spherical viruses, tobacco mosaic virus (TMV) produces a rod-shaped particle with a hollow central channel. However, under physiological conditions the TMV CP forms only disk-shaped macromolecules. Here, we describe the design, construction, purification, and processing of rod-shaped TMV-VLPs using a simple bacterial expression system. The robust nature of this system allows for the display of functional peptides and molecules on the outer surface of this novel VLP.

Tobacco mosaic virus infection disproportionately impacts phloem associated translatomes in Arabidopsis thaliana and Nicotiana benthamiana

In this study we use vascular specific promoters and a translating ribosome affinity purification strategy to identify phloem associated translatome responses to infection by tobacco mosaic virus (TMV) in systemic hosts Arabidopsis thaliana ecotype Shahdara and Nicotiana benthamiana. Results demonstrate that in both hosts the number of translatome gene alterations that occurred in response to infection is at least four fold higher in phloem specific translatomes than in non-phloem translatomes. This finding indicates that phloem functions as a key responsive tissue to TMV infection. In addition, host comparisons of translatome alterations reveal both similarities and differences in phloem responses to infection, representing both conserved virus induced phloem alterations involved in promoting infection and virus spread as well as host specific alterations that reflect differences in symptom responses. Combined these results suggest phloem tissues play a disproportion role in the mediation and control of host responses to virus infection.

Biofabrication of Tobacco mosaic virus-nanoscaffolded supercapacitors via temporal capillary microfluidics

This paper reports the implementation of temporal capillary microfluidic patterns and biological nanoscaffolds in autonomous microfabrication of nanostructured symmetric electrochemical supercapacitors. A photoresist layer was first patterned on the substrate, forming a capillary microfluidics layer with two separated interdigitated microchannels. Tobacco mosaic virus (TMV) macromolecules suspended in solution are autonomously delivered into the microfluidics, and form a dense bio-nanoscaffolds layer within an hour. This TMV layer is utilized in the electroless plating and thermal oxidation for creating nanostructured NiO supercapacitor. The galvanostatic charge/discharge cycle showed a 3.6-fold increase in areal capacitance for the nanostructured electrode compared to planar structures. The rapid creation of nanostructure-textured microdevices with only simple photolithography and bionanostructure self-assembly can completely eliminate the needs for sophisticated synthesis or deposition processes. This method will contribute to rapid prototyping of wide range of nano-/micro-devices with enhanced performance.

Capillary Microfluidics-Assembled Virus-like Particle Bionanoreceptor Interfaces for Label-Free Biosensing

A capillary microfluidics-integrated sensor system is developed for rapid assembly of bionanoreceptor interfaces on-chip and label-free biosensing. Genetically engineered Tobacco mosaic virus (TMV) virus-like particles (VLPs), displaying thousands copies of identical receptor peptides FLAG-tags, are utilized as nanoceptors for antibody sensing. Controlled and accelerated assembly of VLP receptor layer on impedance sensor has been achieved using capillary action and surface evaporation from an open-channel capillary microfluidic system. VLPs create a dense and localized receptor monolayer on the impedance sensor using only 5 μL of VLP sample solution (0.2 mg/mL) in only 6 min at room temperature. The VLP-functionalized impedance sensor is capable of label-free detection of target antibodies down to 55 pM concentration within 5 min. These results highlight the significant potentials of an integrated microsystem for rapid and controlled receptor-transducer interface creation and the nanoscale VLP-based sensors for fast, accurate, and decentralized pathogen detection.

Tobacco mosaic virus-directed reprogramming of auxin/indole acetic acid protein transcriptional responses enhances virus phloem loading

Vascular phloem loading has long been recognized as an essential step in the establishment of a systemic virus infection. In this study, an interaction between the replication protein of tobacco mosaic virus (TMV) and phloem-specific auxin/indole acetic acid (Aux/IAA) transcriptional regulators was found to modulate virus phloem loading in an age-dependent manner. Promoter expression studies show that in mature tissues TMV 126/183-kDa-interacting Aux/IAAs predominantly express and accumulate within the nuclei of phloem companion cells (CCs). Furthermore, CC Aux/IAA nuclear localization is disrupted upon infection with an interacting virus. In situ analysis of virus spread shows that the inability to disrupt Aux/IAA CC nuclear localization correlates with a reduced ability to load into the vascular tissue. Subsequent systemic movement assays also demonstrate that a virus capable of disrupting Aux/IAA localization is significantly more competitive at moving out of older plant tissues than a noninteracting virus. Similarly, CC expression and overaccumulation of a degradation-resistant Aux/IAA-interacting protein was found to inhibit TMV accumulation and phloem loading selectively in flowering plants. Transcriptional expression studies demonstrate a role for Aux/IAA-interacting proteins in the regulation of salicylic and jasmonic acid host defense responses as well as virus-specific movement factors, including pectin methylesterase, that are involved in regulating plasmodesmata size-exclusion limits and promoting virus cell-to-cell movement. Combined, these findings indicate that TMV directs the reprogramming of auxin-regulated gene expression within the vascular phloem of mature tissues as a means to enhance phloem loading and systemic spread.

The impact of phytohormones on virus infection and disease

Phytohormones play a critical role in nearly every aspect of plant biology, including development and pathogen defense. During virus infection disruption of the plant's normal developmental physiology has often been associated with alterations in phytohormone accumulation and signaling. Only recently has evidence emerged describing mechanistically how viruses modulate phytohormone levels and the impact these modulations have on plant physiology and virus biology. From these studies there is an emerging theme of virus directed manipulation of plant hormone responses to disarm defense responses and reprogram the cellular environment to enhance replication and spread. In this review we examine the impact viruses have on plant hormone systems and the effects of this phytohormone manipulation on virus biology.

Tobacco Mosaic Virus assembled high aspect ratio surfaces

A modified version of the rod-shaped Tobacco Mosaic Virus (TMV1cys) provides a robust template for the self-assembly and fabrication of high-surface-area materials for numerous applications including batteries and sensors. TMV1cys surface fabrication is facilitated by the addition of a single cysteine residue to the virus coat protein that directs the vertical attachment of the virus particle onto substrate surfaces and enables deposition of functional inorganic layers. Here we describe the production and purification of the virus, its assembly onto suitable surfaces, and coating with metallic nickel and cobalt.

Tin-coated viral nanoforests as sodium-ion battery anodes

Designed as a high-capacity alloy host for Na-ion chemistry, a forest of Sn nanorods with a unique core-shell structure was synthesized on viral scaffolds, which were genetically engineered to ensure a nearly vertical alignment upon self-assembly onto a metal substrate. The interdigital spaces thus formed between individual rods effectively accommodated the volume expansion and contraction of the alloy upon sodiation/desodiation, while additional carbon-coating engineered over these nanorods further suppressed Sn aggregation during extended electrochemical cycling. Due to the unique nanohierarchy of multiple functional layers, the resultant 3D nanoforest of C/Sn/Ni/TMV1cys, binder-free composite electrode already and evenly assembled on a stainless steel current collector, exhibited supreme capacity utilization and cycling stability toward Na-ion storage and release. An initial capacity of 722 mA·h (g Sn)(-1) along with 405 mA·h (g Sn)(-1) retained after 150 deep cycles demonstrates the longest-cycling nano-Sn anode material for Na-ion batteries reported in the literature to date and marks a significant performance improvement for neat Sn material as alloy host for Na-ion chemistry.

Architecturing hierarchical function layers on self-assembled viral templates as 3D nano-array electrodes for integrated Li-ion microbatteries

This work enables an elegant bottom-up solution to engineer 3D microbattery arrays as integral power sources for microelectronics. Thus, multilayers of functional materials were hierarchically architectured over tobacco mosaic virus (TMV) templates that were genetically modified to self-assemble in a vertical manner on current-collectors, so that optimum power and energy densities accompanied with excellent cycle-life could be achieved on a minimum footprint. The resultant microbattery based on self-aligned LiFePO(4) nanoforests of shell-core-shell structure, with precise arrangement of various auxiliary material layers including a central nanometric metal core as direct electronic pathway to current collector, delivers excellent energy density and stable cycling stability only rivaled by the best Li-ion batteries of conventional configurations, while providing rate performance per foot-print and on-site manufacturability unavailable from the latter. This approach could open a new avenue for microelectromechanical systems (MEMS) applications, which would significantly benefit from the concept that electrochemically active components be directly engineered and fabricated as an integral part of the integrated circuit (IC).

Biological templates for antireflective current collectors for photoelectrochemical cell applications

Three-dimensional (3D) structures such as nanowires, nanotubes, and nanorods have the potential to increase surface area, reduce light reflection, and shorten charge carrier transport distances. The assembly of such structures thus holds great promise for enhancing photoelectrochemical solar cell efficiency. In this study, genetically modified Tobacco mosaic virus (TMV1cys) was used to form self-assembling 3D nanorod current collectors and low light-reflecting surfaces. Photoactive CuO was subsequently deposited by sputtering onto these patterned nanostructures, and these structures were examined for photocurrent activity. CuO thicknesses of 520 nm on TMV1cys patterned current collectors produced the highest photocurrent density of 3.15 mA/cm(2) yet reported for a similar sized CuO system. Reflectivity measurements are in agreement with full-wave electromagnetic simulations, which can be used as a design tool for optimizing the CuO system. Thus the combined effects of reducing charge carrier transport distance, increasing surface area, and the suppression of light reflection make these virus-templated surfaces ideal for photoelectrochemical applications.

DNA binding specificity of ATAF2, a NAC domain transcription factor targeted for degradation by Tobacco mosaic virus

BACKGROUND

Control of the host transcriptome represents a key battleground in the interaction of plants and pathogens. Specifically, plants have evolved complex defense systems that induce profound transcriptional changes in response to pathogen attack while pathogens have evolved mechanisms to subvert or disable these defenses. Several NAC transcription factors such as ATAF2 have been linked to plant defense responses, including those targeting viruses. The replication protein of Tobacco mosaic virus (TMV) has been shown to interact with and target the degradation of ATAF2. These findings suggest that the transcriptional targets of ATAF2 are involved in defense against TMV.

RESULTS

To detect potential ATAF2 transcriptional targets, a genomic pull-down assay was utilized to identify ATAF2 promoter binding sequences. Subsequent mobility shift and DNA footprinting assays identified a 30-bp ATAF2 binding sequence. An in vivo GUS reporter system confirmed the function of the identified 30-bp binding sequence as an ATAF2 specific transcriptional activator in planta. Gel filtration studies of purified ATAF2 protein and mutagenesis studies of the 30-bp binding sequence indicate ATAF2 functions as a dimer. Computational analysis of interacting promoter sequences identified a corresponding 25-bp A/T-rich consensus sequence with repeating [GC]AAA motifs. Upon ATAF2 induction real-time qRT-PCR studies confirmed the accumulation of select gene transcripts whose promoters contain this consensus sequence.

CONCLUSION

We report the identification of a cis-regulatory binding sequence for ATAF2. Different from other known NAC protein binding sequences, the A/T-rich ATAF2 binding motif represents a novel binding sequence for NAC family proteins. Combined this information represents a unique tool for the identification of ATAF2 target genes.

Association of the Tobacco mosaic virus 126kDa replication protein with a GDI protein affects host susceptibility

An interaction between the Tobacco mosaic virus (TMV) 126kDa replication protein and a host-encoded Rab GDP dissociation inhibitor (GDI2) was identified and investigated for its role in infection. GDI proteins are essential components of vesicle trafficking pathways. TMV infection alters the localization of GDI2 from the cytoplasm to ER-associated complexes. Partial silencing of GDI2 results in significant increases in the number of TMV infection foci observed in inoculated tissues. However, GDI2 silencing does not affect TMV accumulation at the infection site, cell-to-cell movement, or susceptibility of the host to mechanical inoculation. Furthermore, increases in the number of successful infection foci were specific to TMV and correlated with the appearance of vesicle-like rearrangements in the vacuolar membrane. Tissue infiltrations with brefeldin A, an inhibitor of vesicle trafficking, also enhanced host susceptibility to TMV. Combined these findings suggest that the 126kDa-GDI2 interaction alters vesicle trafficking to enhance the establishment of an infection.

Biotemplated aqueous-phase palladium crystallization in the absence of external reducing agents

A new synthetic strategy enabling highly controlled aqueous-phase palladium crystallization on the tobacco mosaic virus (TMV) is demonstrated without the addition of external reducing agents. This low cost, solution processing method yields continuous and uniform coatings of polycrystalline palladium on TMV, creating highly uniform palladium nanowires of tens of nanometers in thickness and hundreds of nanometers in length. Our approach utilizes a palladium chloride precursor to produce metallic Pd coatings on TMV without the need for an external reducing agent. X-ray photoelectron spectroscopy and in situ transmission electron microscopy were used to confirm the reduction of the surface palladium oxide layer on the palladium metal wires during room temperature hydrogenation. This leads to metallic palladium nanowires with surfaces free of residual organics, making these structures suitable for applications in nanoscale electronics.

Virus-enabled silicon anode for lithium-ion batteries

A novel three-dimensional Tobacco mosaic virus assembled silicon anode is reported. This electrode combines genetically modified virus templates for the production of high aspect ratio nanofeatured surfaces with electroless deposition to produce an integrated nickel current collector followed by physical vapor deposition of a silicon layer to form a high capacity silicon anode. This composite silicon anode produced high capacities (3300 mAh/g), excellent charge-discharge cycling stability (0.20% loss per cycle at 1C), and consistent rate capabilities (46.4% at 4C) between 0 and 1.5 V. The biological templated nanocomposite electrode architecture displays a nearly 10-fold increase in capacity over currently available graphite anodes with remarkable cycling stability.

Helicase ATPase activity of the Tobacco mosaic virus 126-kDa protein modulates replicase complex assembly

Mutations disrupting helicase domain motifs of the Tobacco mosaic virus 126/183-kDa proteins were investigated for their effect on replicase function and assembly. These mutations inhibited virus replication but did not affect 126-kDa induced N gene resistance or RNAi suppression. However, in vivo expressed 126-kDa motif mutants yielded two distinct cytoplasmic phenotypes that correlated with ATPase activity. Specifically, ATPase active 126-kDa proteins produced small cytoplasmic bodies that resembled the ovoid granular-like bodies found early in virus infection while 126-kDa proteins defective in ATPase activity produced large tubule containing cytoplasmic bodies similar to those observed late in infection. Additional studies indicate that the helicase ATPase activity resides predominantly within monomer and dimer helicase forms and that motifs affecting ATPase activity induce alterations in helicase assembly. Combined these findings indicate that helicase ATPase activity modulates the progression of replicase complex assembly and maturation.

Quantitative study of Au(III) and Pd(II) ion biosorption on genetically engineered Tobacco mosaic virus

One major obstacle in the mineralization of metal onto biologically derived templates is the lack of fundamental information pertaining to the relationship between metal ion loading and overall metal deposition onto the biotemplate. This study focuses on Au(III) and Pd(II) biosorption on the genetically-modified model biological template Tobacco mosaic virus (TMV1Cys). Metal ion (Au(III) or Pd(II)) loading on the TMV1Cys template was measured as a function of the equilibrium concentration of Au(III) or Pd(II) ions in solution at several temperatures. In addition, the Pd(II) loading on the TMV-wild (wild-type TMV) and TMV1Cys were compared to estimate the improvement of metal ion loading by genetic modification of the biotemplate. The gold or palladium coatings on the TMV1Cys were prepared using various metal ion loadings. Results show, for a range of metal ion loadings, a positive correlation existed between the concentration of the metal ions and the coating density of the metals deposited on the virus surface.

Biofabrication methods for the patterned assembly and synthesis of viral nanotemplates

This paper reports on novel methodologies for the patterning and templated synthesis of virus-structured nanomaterials in two- and three-dimensional microfabricated architectures using the Tobacco mosaic virus (TMV). The TMV is a high aspect ratio biological molecule which can be engineered to include amino acids with enhanced binding properties. These modifications facilitate self-assembly of the TMV onto various substrates and enable its use as a template for the synthesis of nanostructured materials. This work focuses on the combination of this bottom-up biologically inspired fabrication method with standard top-down micromachining processes that allow direct integration of the virus-structured materials into batch-fabricated devices. Photolithographic patterning of uncoated as well as nickel-coated TMV nanostructures has been achieved using a lift-off process in both solvent and mild basic solutions and their assembly onto three-dimensional polymer and silicon microstructures is demonstrated. In addition to these patterning techniques, in situ formation of metal oxide TMV coatings in patterned microfabricated environments is shown using atomic layer deposition directly on the nickel-coated viruses. The biofabrication 'process toolbox' presented in this work offers a simple and versatile alternative for the hierarchical patterning and incorporation of biotemplated nanomaterials into micro/nanofabrication schemes.

Self-assembly of virus-structured high surface area nanomaterials and their application as battery electrodes

High area nickel and cobalt surfaces were assembled using modified Tobacco mosaic virus (TMV) templates. Rod-shaped TMV templates (300 x 18 nm) engineered to encode unique cysteine residues were self-assembled onto gold patterned surfaces in a vertically oriented fashion, producing a >10-fold increase in surface area. Electroless deposition of ionic metals onto surface-assembled virus templates produced uniform metal coatings up to 40 nm in thickness. Within a nickel-zinc battery system, the incorporation of virus-assembled electrode surfaces more than doubled the total electrode capacity. When combined, these findings demonstrate that surface-assembled virus templates provide a robust platform for the fabrication of oriented high surface area materials.

TMV microarrays: hybridization-based assembly of DNA-programmed viral nanotemplates

The intrinsic ability of biological molecules to self-organize into complex structures has the potential to revolutionize methods for the assembly of nanomaterials and devices. In this work, nucleic acid hybridization was used to simultaneously assemble different Tobacco mosaic virus (TMV) nanotemplates onto a glass substrate patterned with address specific capture DNAs. To accomplish this, TMV-based nanotemplates were programmed with linker DNAs containing sequence specific addresses and hybridized directly to the capture DNAs. This assembly process proved to be a reliable, selective, and controllable means to assemble multiple TMV nanotemplates.

Virus-induced disease: altering host physiology one interaction at a time

Virus infections are the cause of numerous plant disease syndromes that are generally characterized by the induction of disease symptoms such as developmental abnormalities, chlorosis, and necrosis. How viruses induce these disease symptoms represents a long-standing question in plant pathology. Recent studies indicate that symptoms are derived from specific interactions between virus and host components. Many of these interactions have been found to contribute to the successful completion of the virus life-cycle, although the role of other interactions in the infection process is not yet known. However, all share the potential to disrupt host physiology. From this information we are beginning to decipher the progression of events that lead from specific virus-host interactions to the establishment of disease symptoms. This review highlights our progress in understanding the mechanisms through which virus-host interactions affect host physiology. The emerging picture is one of complexity involving the individual effects of multiple virus-host interactions.

The Tobacco mosaic virus replicase protein disrupts the localization and function of interacting Aux/IAA proteins

Previously, we identified a correlation between the interaction of the Tobacco mosaic virus (TMV) 126/183-kDa replicase with the auxin response regulator indole acetic acid (IAA)26/PAP1 and the development of disease symptoms. In this study, the TMV replicase protein is shown to colocalize with IAA26 in the cytoplasm and prevent its accumulation within the nucleus. Furthermore, two additional auxin (Aux)/IAA family members, IAA27 and IAA18, were found to interact with the TMV replicase and displayed alterations in their cellular localization or accumulation that corresponded with their ability to interact with the TMV replicase. In contrast, the localization and accumulation of noninteracting Aux/IAA proteins were unaffected by the presence of the viral replicase. To investigate the effects of the replicase interaction on Aux/IAA function, transgenic plants expressing a proteolysis-resistant IAA26-P108L-green fluorescent protein (GFP) protein were created. Transgenic plants accumulating IAA26-P108L-GFP displayed an abnormal developmental phenotype that included severe stunting and leaf epinasty. However, TMV infection blocked the nuclear localization of IAA26-P108L-GFP and attenuated the developmental phenotype displayed by the transgenic plants. Combined, these findings suggest that TMV-induced disease symptoms can be attributed, in part, to the ability of the viral replicase protein to disrupt the localization and subsequent function of interacting Aux/IAA proteins.

Molecularly imprinted polymers for tobacco mosaic virus recognition

Molecular imprinted Polymers (MIP) targeted for Tobacco mosaic virus (TMV) have been synthesized. Batch equilibrium studies using imprinted and non-imprinted polymer hydrogels in TMV and TNV solutions were conducted to determine virus-binding capacities. TMV-imprinted hydrogels showed increased binding to TMV (8.8 mg TMV/gpolymer) compared to non-imprinted hydrogels (4.2 mg TMV/gpolymer). Furthermore, TMV-imprinted hydrogels exhibited increased binding to TMV compared to TNV, while non-imprinted hydrogels bound similar amounts of TMV or TNV. This research has demonstrated that molecular imprinting of viruses can be used to selectively induce binding of target viruses based on shape differences of their virions.

Effect of CuCl2 concentration on the aggregation and mineralization of Tobacco mosaic virus biotemplate

Aggregation of the biotemplates in mineralization processes is a considerable obstacle in preparing well-dispersed bio-inorganic hybrid materials. In this study, aggregation and mineralization of Tobacco mosaic virus (TMV) biotemplates were investigated as a function of the copper precursor (CuCl2) concentration. The mean hydrodynamic radius of TMV in an aqueous CuCl2 solution was determined by dynamic light scattering for the monitoring of the TMV aggregation. At CuCl2 concentration of 0.5 mM or higher, the mean hydrodynamic radius of TMV increased dramatically indicating aggregation of the TMV particles. Numerical calculations on the long-range interaction energy between parallel model TMV particles agreed with the experimental observations for the TMV aggregation. Mineralization of copper precursors on the TMV biotemplates was achieved only at the CuCl2 concentrations that induced considerable aggregation of the biotemplate. From the numerical calculations and experimental results, it was concluded that a dense copper cluster deposition cannot be achieved without aggregation of TMV templates.

Deposition of platinum clusters on surface-modified Tobacco mosaic virus

Nanoscaled Pt conductors were prepared from genetically engineered Tobacco mosaic virus (TMV) templates through Pt cluster deposition on the outer surface of the TMV. Pt clusters were synthesized and deposited on the engineered TMV with surface-exposed cysteine via the in situ mineralization of hexachloroplatinate anions. This deposition was driven by the specific binding between thiols and the solid metal clusters. In addition, Pt-thiolate adducts are suggested to form on the engineered TMV in aqueous solutions that work as nucleation sites for the formation of the Pt clusters. The specific binding between Pt clusters and the engineered TMV template was investigated using UV/vis spectrophotometry and quartz crystal microbalance (QCM) analysis. The electric conductance of Pt-deposited TMV was greater than that of the uncoated TMV virion particles. This result suggests the application of metal cluster-deposited engineered TMV in future electrical devices such as rapid response sensors.

Characterization of silica-coated tobacco mosaic virus

The deposition of silica on the surface of tobacco mosaic virus (TMV) is achieved at a higher pH (>7) as a means to enhance its usefulness as a template for the synthesis of nanostructures. Electron energy loss spectroscopy definitively shows the presence of a silica shell on the surface of the TMV while small angle X-ray scattering differentiates successfully between silica-coated TMV and silica particles in the presence of uncoated TMV. Importantly, coating reactions done in a 50% w/v methanol/water solution produce smaller silica nanostructures during the condensation of the hydrolysis intermediates, possibly aiding in obtaining uniform coating. Furthermore, TMV-templated silica coatings are found to enhance the stability of the virus particle in methanol at conditions that would ordinarily disrupt the assembled particle. Combined these findings demonstrate that TMV can function as an efficient template for the controlled deposition of silica at neutral pH.

Biofabrication with Chitosan

The traditional motivation for integrating biological components into microfabricated devices has been to create biosensors that meld the molecular recognition capabilities of biology with the signal processing capabilities of electronic devices. However, a different motivation is emerging; biological components are being explored to radically change how fabrication is achieved at the micro- and nanoscales. Here we review biofabrication, the use of biological materials for fabrication, and focus on three specific biofabrication approaches: directed assembly, where localized external stimuli are employed to guide assembly; enzymatic assembly, where selective biocatalysts are enlisted to build macromolecular structure; and self-assembly, where information internal to the biological material guides its own assembly. Also reviewed are recent results with the aminopolysaccharide chitosan, a material that offers a combination of properties uniquely suited for biofabrication. In particular, chitosan can be directed to assemble in response to locally applied electrical signals, and the chitosan backbone provides sites that can be employed for the assembly of proteins, nucleic acids, and virus particles.

Patterned assembly of genetically modified viral nanotemplates via nucleic acid hybridization

The patterning of nanoparticles represents a significant obstacle in the assembly of nanoscale materials and devices. In this report, cysteine residues were genetically engineered onto the virion surface of tobacco mosaic virus (TMV), providing attachment sites for fluorescent markers. To pattern these viruses, labeled virions were partially disassembled to expose 5' end RNA sequences and hybridized to virus-specific probe DNA linked to electrodeposited chitosan. Electron microscopy and RNAase treatments confirmed the patterned assembly of the virus templates onto the chitosan surface. These findings demonstrate that TMV nanotemplates can be dimensionally assembled via nucleic acid hybridization.

Improved metal cluster deposition on a genetically engineered tobacco mosaic virus template

Improved depositions of various metal clusters onto a biomolecular template were achieved using a genetically engineered tobacco mosaic virus (TMV). Wild-type TMV was genetically altered to display multiple solid metal binding sites through the insertion of two cysteine residues within the amino-terminus of the virus coat protein. Gold, silver, and palladium clusters synthesized through in situ chemical reductions could be readily deposited onto the genetically modified template via the exposed cysteine-derived thiol groups. Metal cluster coatings on the cysteine-modified template were more densely deposited and stable than similar coatings on the unmodified wild-type template. Combined, these results confirm that the introduction of cysteine residues onto the outer surface of the TMV coat protein enhances the usefulness of this virus as a biotemplate for the deposition of metal clusters.

Interaction of the tobacco mosaic virus replicase protein with the Aux/IAA protein PAP1/IAA26 is associated with disease development

Virus-infected plants often display developmental abnormalities that include stunting, leaf curling, and the loss of apical dominance. In this study, the helicase domain of the Tobacco mosaic virus (TMV) 126- and/or 183-kDa replicase protein(s) was found to interact with the Arabidopsis Aux/IAA protein PAP1 (also named IAA26), a putative regulator of auxin response genes involved in plant development. To investigate the role of this interaction in the display of symptoms, a TMV mutant defective in the PAP1 interaction was identified. This mutant replicated and moved normally in Arabidopsis but induced attenuated developmental symptoms. Additionally, transgenic plants in which the accumulation of PAP1 mRNA was silenced exhibit symptoms like those of virus-infected plants. In uninfected tissues, ectopically expressed PAP1 accumulated and localized to the nucleus. However, in TMV-infected tissues, PAP1 failed to accumulate to significant levels and did not localize to the nucleus, suggesting that interaction with the TMV replicase protein disrupts PAP1 localization. The consequences of this interaction would affect PAP1's putative function as a transcriptional regulator of auxin response genes. This is supported by gene expression data indicating that approximately 30% of the Arabidopsis genes displaying transcriptional alterations in response to TMV contain multiple auxin response promoter elements. Combined, these data indicate that the TMV replicase protein interferes with the plant's auxin response system to induce specific disease symptoms.

Tobacco mosaic virus induced alterations in the gene expression profile of Arabidopsis thaliana

In this study, mRNA profiles generated from cDNA microarrays were used to identify gene expression changes in Arabidopsis thaliana ecotype Shahdara infected with Tobacco mosaic virus (TMV). Shahdara is a susceptible TMV host, permitting rapid accumulations of virus in both inoculated and systemic tissues, accompanied by defined disease symptoms that include stunting, necrosis, and leaf curling. Gene expression profiles were monitored in whole tissues of inoculated leaves at four days postinoculation (dpi) and in systemically infected leaves at 14 dpi. Microarrays contained cDNAs representing between 8,000 and 10,000 Arabidopsis genes. Expression analysis identified 68 genes that displayed significant and consistent changes in expression levels, either up or down, in either TMV inoculated or systemically infected tissues, or both. Identified TMV-responsive genes encode a diverse array of functional proteins that include transcription factors, antioxidants, metabolic enzymes, and transporters. Thus, the TMV infection process has a significant impact on a wide array of cellular processes that likely reflect the biochemical and physiological changes involved in the development of this disease syndrome.