Thermally-induced cellulose nanofibril films with near-complete ultraviolet-blocking and improved water resistance

Silver nanoparticles coated cellulose-based flexible membrane with excellent UV resistance, high infrared reflection and water resistance for personal thermal management

Designing of a green and multifunctionally integrated cellulose-based flexible wearable material with personal thermoregulation, water and ultraviolet (UV) resistance is essential for the development of personal thermal management and smart textiles. Herein, a hydrophobic silver nanoparticles cellulose-based membrane (H-AgNPs/CEPCM) was prepared through simple solution blending, spin-coating process and chemical vapor modification. The prepared membrane exhibited excellent UV resistance due to the synergistic effect of carbon quantum dots (CQDs) as well as UV-absorbing functional groups. The spin-coated AgNPs layer with high infrared reflectivity has great radiant insulation, and temperature was reduced by 3.4 °C compared with H-CEPCM in indoor environment. Furthermore, the mechanical properties of H-AgNPs/CEPCM were significantly improved by the introduction of amide and ether bonds, as well as a large number of hydrogen bonds. This led to a tensile strength of 23.21 MPa and an elongation at break of 16.57 %, while also providing water resistance. Additionally, the H-AgNPs/CEPCM exhibited outstanding thermal stability and hydrophobicity. This work may provide a feasible and promising strategy for the construction of multifunctional integrated cellulose membrane materials for radiant insulation, outdoor textiles and novel UV protection applications.

Nanocellulose Composite Films in Food Packaging Materials: A Review

Owing to the environmental pollution caused by petroleum-based packaging materials, there is an imminent need to develop novel food packaging materials. Nanocellulose, which is a one-dimensional structure, has excellent physical and chemical properties, such as renewability, degradability, sound mechanical properties, and good biocompatibility, indicating promising applications in modern industry, particularly in food packaging. This article introduces nanocellulose, followed by its extraction methods and the preparation of relevant composite films. Meanwhile, the performances of nanocellulose composite films in improving the mechanical, barrier (oxygen, water vapor, ultraviolet) and thermal properties of food packaging materials and the development of biodegradable or edible packaging materials in the food industry are elaborated. In addition, the excellent performances of nanocellulose composites for the packaging and preservation of various food categories are outlined. This study provides a theoretical framework for the development and utilization of nanocellulose composite films in the food packaging industry.

Photocrosslinkable and hydroplasicable UV-shielding nanocellulose films facilitated by hydroxyl-yne click reaction

Sustainably-sourced functional nanocellulose materials are vitally important for the green and sustainable development. Herein, we reported photocrosslinkable and hydroplasticable TEMPO-oxidized cellulose nanofiber phenyl propylene ketone ethers (TOCNPPK) films with excellent ultraviolet (UV) shielding, highly reversible processability, and extended mechanical properties, which were facilitated by green hydroxyl-yne click reaction. The introduction of conjugated aromatic ring and vinyl bonds (-C=C-) had been demonstrated the key for the improved overall performance of resultant TOCNPPK, which not only endowed the TOCNPPK with nearly 100 % UV shielding, but also enabled it to be formed into diverse 3D shapes (helix, ring and letters "N, F, U") via the facile hydrosetting method. The photocrosslinkable-enhanced mechanical performance of TOCNPPK films was also attributed to -C=C- which could crosslink via [2π + 2π] cycloaddition reactions under UV-irradiation. The ultimate stress of TOCNPPK films was as high as 210.0 ± 22.8 MPa and the Young's modulus was 11.5 ± 0.7 GPa, much superior to those of 128.6 ± 8.5 MPa and 9.2 ± 0.6 GPa for pristine TOCN films. Furthermore, the TOCNPPK had been demonstrated as efficient nanofillers for both hydrophilic polyvinyl alcohol and lipophilic polycaprolactone to develop advanced biodegradable composite films with the integration of good water-wetting resistance, excellent UV blocking, and photo-enhanced mechanical performance.

Effect of cellulose nanofiber-montmorillonite hybrid filler on the melt blending of thermoplastic starch composites

This study investigated the impact of cellulose nanofibers (CNFs) on montmorillonites (MMTs) exfoliation within thermoplastic starch (TPS) nanocomposites during the melt blending process. TPS nanocomposite films were manufactured using an internal mixer with a controlled ratio of CNFs and MMTs to evaluate the effect of individual and hybrid fillers on the material interactions and characteristics of the TPS composites. The incorporation of hybrid fillers resulted in notable enhancements in torque values and rheological properties, suggesting interactions between the starch, CNFs, and MMTs. The degree of MMT intercalation, obtained via X-ray diffraction analysis, decreased with the addition of CNFs, indicating that CNFs positively impacted MMT exfoliation. Scanning electron microscopy (SEM) images of cryo- and tensile-fractured samples highlighted the effectiveness of CNFs in facilitating MMT exfoliation and reinforcing interactions between the MMTs and TPS matrix. These interactions enhanced the tensile strength and Young's modulus by up to 95.8 % and 278.2 %, respectively, with a 1:1 weight ratio of CNFs to MMTs. Additionally, well-dispersed MMTs within the TPS matrix caused passivation and created tortuous paths, improving the water contact angle and decreasing the water vapor sorption. These synergistic effects of the hybrid filler, achieved through a melt blending process, indicate the potential use of TPS nanocomposites as an eco-friendly packaging material.

Multi-functional nanocellulose based nanocomposites for biodegradable food packaging: Hybridization, fabrication, key properties and application

Nowadays, non-degradable plastic packaging materials have caused serious environmental pollution, posing a threat to human health and development. Renewable eco-friendly nanocellulose hybrid (NCs-hybrid) composites as an ideal alternative to petroleum-based plastic food packaging have been extensively reported in recent years. NCs-hybrids include metal, metal oxides, organic frameworks (MOFs), plants, and active compounds. However, no review systematically summarizes the preparation, processing, and multi-functional applications of NCs-hybrid composites. In this review, the design and hybridization of various NCs-hybrids, the processing of multi-scale nanocomposites, and their key properties in food packaging applications were systematically explored for the first time. Moreover, the synergistic effects of various NCs-hybrids on several properties of composites, including mechanical, thermal, UV shielding, waterproofing, barrier, antimicrobial, antioxidant, biodegradation and sensing were reviewed in detailed. Then, the problems and advances in research on renewable NCs-hybrid composites are suggested for biodegradable food packaging applications. Finally, a future packaging material is proposed by using NCs-hybrids as nanofillers and endowing them with various properties, which are denoted as "PACKAGE" and characterized by "Property, Application, Cellulose, Keen, Antipollution, Green, Easy."

Efficient ultraviolet blocking film on the lignin-rich lignocellulosic nanofibril from bamboo

The ultraviolet (UV) blocking performance of current bio-based devices is always limited by delignification and exploited chemical treatment. Lignocellulosic nanofibril (LCNF) is a promising green alternative that could efficiently impede UV radiation. Herein, we proposed a robust LCNF film that achieved 99.8 ± 0.19 % UVB blocking, 96.1 ± 0.23 % UVA blocking, and was highly transparent without complex chemical modification. Compared to conventional lignin composites, this LCNF method involves 29.5 ± 2.31 % lignin content directly extracted from bamboo as a broad-spectrum sun blocker. This bamboo-based LCNF film revealed an excellent tensile strength of 94.9 ± 3.6 MPa and outstanding stability, adapting to the natural environment's variability. The residual hemicellulose could also embed the link between lignin and cellulose, confirming high lignin content in the network. The connection between lignin and hemicelluloses in the cellulose network was explored and described for the fibrillation of lignocellulosic nanofibrils. This research highlights the promising development of LCNFs for UV protection and bio-based solar absorption materials.

Construction of composite films using carbon nanodots for blocking ultraviolet light from the Sun

Carbon nanodots (CNDs) which demonstrate concentration-dependent emission and have a photoluminescence quantum yield of 45% were designed. Transparent CND-containing composite films (CND-films), obtained by combining the CNDs with polyvinyl alcohol in different proportions, were shown to block the UV component of sunlight. Whereas the pure PVA film could not block UV light, the ability of CND-films to block UV light could be adjusted by altering the proportion of CNDs in the film. The larger the proportion of CNDs, the greater the extent of UV blocking. CND-film containing 32 wt% CNDs completely blocked UV light (≤400 nm) from sunlight, without affecting the transmission of visible light (>800 nm). The ability of the CND-films to block the UV component of sunlight was investigated using a commercially available UV-induced color change card, which confirmed that the capacity of the CND-films to block UV light could be adjusted by altering the proportion of CNDs in the film. This study shows that CNDs with concentration-dependent long wavelength emission characteristics can be used as optical barrier units for the preparation of materials to block high-energy short wavelength light.

Lignin decolorization in organic solvents and their application in natural sunscreen

In order to improve the utilization of industrial lignin as an effective component for ultraviolet (UV) shielding, organic solvent (methanol, ethanol, and acetone) fractionation was applied to improve its UV absorption performance and reduce its apparent color. Physicochemical properties of lignin and lignin-based sunscreens, such as molar mass fraction, functional group content, color change and UV shielding properties, were characterized in detail by GPC, UV spectroscopy, ³¹P NMR and HSQC-NMR spectroscopy. The results showed that the color and UV-shielding properties of the soluble fraction were significantly superior to those of the original and insoluble fractions. Different lignin fractions were acted as the only active substance in the pure cream and its UV-shielding properties were compared. Among them, the composite sunscreen by adding 5 wt% acetone fractionated lignin had highest sun protection factor (SPF) value of 6.6, approximately 4.5 times higher than those sunscreens mixed with pristine lignin. Overall, this work offers the potential of industrial lignin in value-added applications such as UV protection and cosmetics.

Nano-MIL-88A(Fe) Enabled Clear Cellulose Films with Excellent UV-Shielding Performance and Robust Environment Resistance

While tremendous efforts have been dedicated to developing cellulose-based ultraviolet (UV)-blocking films, challenges still remain in simultaneously achieving high transparency, low haze and excellent UV shielding properties via simple and green strategy. Here, we present a facile and eco-friendly route to fabricate flexible, biodegradable and clear UV-shielding nano-MIL-88A(Fe)@carboxymethylated cellulose films (M(Fe)CCFs) via in situ synthesis of nano-MIL-88A(Fe) in carboxymethylated cellulose hydrogel followed by natural drying. The carboxymethylated cellulose film has high transmittance (93.2%) and low haze (1.8%). The introduction of nano-MIL-88A(Fe) endowed M(Fe)CCFs superior UV-shielding ability, while retaining high transmittance (81.5-85.3%) and low haze (2.5-4.9%). Moreover, M(Fe)CCFs showed stable UV blocking performance under UV irradiation, high temperature, acidic or alkaline conditions. Quite encouragingly, the UV-shielding ability of M(Fe)CCFs did not deteriorate, even after 30 days of immersion in aqueous solution, providing films with a long-term use capacity. Thus, M(Fe)CCFs show high potential in the UV protection field. Overall, these UV-blocking films with outstanding performances are a promising candidate to replace conventional film materials made from synthetic polymers in fields such as packaging and flexible electronics.

A biodegradable film based on cellulose and thiazolidine bearing UV shielding property

The current rationale is exploring new eco-friendly UV- shielding films based on cellulose and thiazolidine. Cellulose was oxidized to dialdehyde cellulose (DAC) and tricarboxy cellulose (TCC) by periodate and TEMPO/periodate/hypochlorite, respectively. While E-3-amino-5-(phenyldiazenyl)-2-thioxothiazolidin-4-one (TH) was synthesized by coupling diazonium salt with the 5-methylene of 2-thioxo-4-thiazolidinone. DAC was then coupled with TH via Schiff base reaction and incorporated onto TCC with different ratios to get UV-shielding films. ¹HNMR, infrared spectroscopy (FTIR), and thermal gravimetric analysis (TGA) were used to investigate the chemical structure of the synthesized materials. In addition, the films' morphology, thermal, mechanical, and UV-shielding properties were investigated. The UV-shielding studies revealed that the film with 10% DAC-TH has 99.88, 99.99, and 96.19% UV-blocking (UVB), UV-absorbance (UVA), and Ultra-violet protection (UPF), respectively. Moreover, the prepared films demonstrated promising antimicrobial activity against Escherichia coli, S. aureus, P. aeruginosa, and Candida albicans. Finally, the prepared films showed no cytotoxic effects on normal human skin fibroblast's HFB-4 cell line.

Optical Properties of Cellulose Nanofibre Films at High Temperatures

Nanocelluloses and their different designs, such as films and nanopapers, have gained considerable interest in many application areas due to their unique properties. For many purposes, such as packaging and electronics, the thermal stability and optical properties of nanocellulose materials are crucial characteristics. In this study, the effects of heat treatment (100 ºC, 150 ºC and 200 ºC) on the optical and mechanical properties of 2,2,6,6-tetramethylpiperidinyl-1-oxy radical-oxidised cellulose nanofibre (TO-CNF) films were investigated, especially the alteration of the colour, complex refractive index and birefringence. Exposing TO-CNF films to high temperatures (> 150 ºC) induced permanent transformations in the CNF structure, leading to an increase in the refractive index, decreases in the birefringence and crystallinity index, colour darkening and significant deterioration of the mechanical properties.

Graphical abstract

Enhancing the thermostability, UV shielding and antimicrobial activity of transparent chitosan film by carbon quantum dots containing N/P

The chitosan (CS) transparent film has attracted much attention in food and medicine packaging areas due to their biodegradability and good availability. A novel carbon quantum dots compound containing nitrogen and phosphorus (NP-CQDs) was obtained by reacting citric acids, with urea and phytic acids. The density of the film was increased, and the water vapor permeation was reduced by the presence of NP-CQDs. The introduction of 4 wt% NP-CQDs increased the water contact angle of the CS film from 79.2° to 105.8°. The shielding on UV-A and UV-B transmittance was increased with the NP-CQDs loading. The film containing 4 wt% NP-CQDs blocked more than 90.2% UV-A and 96.5% UV-B; however, it only blocked 26.8% visible light. It also exhibited better antibacterial activity to both E. coli and S. aureus than the control CS film. This work provided a feasible way to prepare multifunctional bio-safe film.

Plant-Based Structures as an Opportunity to Engineer Optical Functions in Next-Generation Light Management

This review addresses the reconstruction of structural plant components (cellulose, lignin, and hemicelluloses) into materials displaying advanced optical properties. The strategies to isolate the main building blocks are discussed, and the effects of fibrillation, fibril alignment, densification, self-assembly, surface-patterning, and compositing are presented considering their role in engineering optical performance. Then, key elements that enable lignocellulosic to be translated into materials that present optical functionality, such as transparency, haze, reflectance, UV-blocking, luminescence, and structural colors, are described. Mapping the optical landscape that is accessible from lignocellulosics is shown as an essential step toward their utilization in smart devices. Advanced materials built from sustainable resources, including those obtained from industrial or agricultural side streams, demonstrate enormous promise in optoelectronics due to their potentially lower cost, while meeting or even exceeding current demands in performance. The requirements are summarized for the production and application of plant-based optically functional materials in different smart material applications and the review is concluded with a perspective about this active field of knowledge.

Nano-Metal Organic Framework for Enhanced Mechanical, Flame Retardant and Ultraviolet-Blue Light Shielding Properties of Transparent Cellulose-Based Bioplastics

From the perspective of sustainable development and practical applications, there has been a great need for the design of multifunctional transparent cellulose-based composite films. We herein propose a novel concept of improving the mechanical, fire-resistant and ultraviolet (UV)-blue light shielding properties of cellulose-based composite bioplastic films though in situ embedding nano-metal organic framework (MIL-125(Ti)-NH₂) into regenerated cellulose gel. Regenerated cellulose hydrogel (CH) with a porous structure acts as a nanoreactor and stabilizer to facilitate the growth and anchorage of MIL-125(Ti)-NH₂ nanoparticles (MNPs). Subsequently, hot-pressing induces the formation of transparent MIL-125(Ti)-NH₂@cellulose bioplastics (MNP@CBPs). As expected, the MNP@CBPs exhibit exceptional UV-blue light shielding capability, while retaining satisfactory optical transmittance. Meanwhile, with the incorporation of MNPs, the mechanical strength of MNP@CBPs is increased by 6.5~25.9%. In addition, MNPs enhance the flame retardant effect of the MNP@CBPs. The limited oxygen index (LOI) of the MNP@CBPs increased from 21.95 to 27.01%. The hot-pressing process improves the resistance of the MNP@CBPs to the penetration of water/non-aqueous liquids. This simple strategy would direct sustainable multifunctional MNP@CBPs toward diversified applications: food containers or packaging materials that can reduce or eliminate food spoilage, screen protectors for blocking harmful light, and promising candidates for protective plastic products, among others.

Natural lignocellulosic nanofibril film with excellent ultraviolet blocking performance and robust environment resistance

Due to the current state of ozone layer depletion and potential risk of skin cancer, researches on sustainable cellulose-based films with ultraviolet (UV) blocking capabilities has attracted widespread attention. However, pure cellulose-based film required UV absorbent to be incorporated because of its poor UV blocking ability. In this work, natural lignocellulosic nanofibril (LCNF) film was fabricated by vacuum filtration and pressing process without any complex chemical modification or adding UV absorbers. The residual lignin retained in LCNF was found to act as natural macro-molecular UV absorber. LCNF film with lignin content of 4.89-15.68% exhibited excellent thermal stability, and their UVA and UVB blocking were in the range of 81.4-99.5% and 96.7-100%, respectively. Moreover, LCNF film exhibited stable UV shielding performance under high temperature, UV irradiation, acidic or alkaline conditions, providing LCNF film with a long-term use capacity. Overall, LCNF film is more environmentally friendly and harmless, which shows high potentials in anti-counterfeiting materials, UV protection, and windshields for vehicles.

Poplar Hot Water Extract Enhances Barrier and Antioxidant Properties of Chitosan/Bentonite Composite Film for Packaging Applications

Herein, the chitosan-based (CS) composite film was fabricated via a simple and efficient blending approach by adding poplar hot water extract (HWE), bentonite (BT) and chitosan. The addition of HWE largely improved the UV blocking ability and antioxidant properties of the resultant composite film, and simultaneously a tortuous path was constructed within the chitosan matrix to enhance the water vapor and oxygen barriers after the addition of BT. Specially, the content of HWE at 10 wt % gave a greatly decreased UV light transmittance at 280 nm to the CS-BT-HWE composite film that was 99.36% lower than that of CS-BT film, and the oxidation resistance was 9.65 times higher than that of CS-BT. The mechanical properties and surface morphological observation evaluated by scanning electron microscopy (SEM) and scanning probe microscope (SPM) confirmed the film had a denser structure. The internal chemical structure analyzed using solid state NMR, FTIR and X-ray spectra exhibited the resultant Maillard structure and strong hydrogen bonding that contributed to the improved mechanical properties. Overall, the as-prepared composite film has great potential as food packaging materials, and also provides a high-efficient utilization pathway for HWE.