Ag-functionalized nanocrystalline cellulose for paper preservation and strengthening

Characterization of TEMPO-Oxidized Cellulose Nanofiber From Biowaste and Its Influence on Molecular Behavior of Fluorescent Rhodamine B Dye in Aqueous Suspensions

Cellulose nanofiber (CNFs) obtained through TEMPO oxidation was structurally characterized using FT-IR (Fourier Transformed Infrared) and SEM (Scanning Electron Microscopy) spectroscopy. The molecular aggregation and spectroscopic properties of Rhodamine B (Rh-B) in CNFs suspension were investigated using molecular absorption and steady-state fluorescence spectroscopy techniques. The interaction between CNFs particles in the aqueous suspension and the cationic dye compound was examined in comparison to its behavior in deionized water. This interaction led to significant changes in the spectral features of Rh-B, resulting in an increase in the presence of H-dimer and H-aggregate in CNFs suspension. The H-type aggregates of Rh-B in CNFs suspensions were defined by the observation of a blue-shifted absorption band compared to that of the monomer. Even at diluted dye concentrations, the formation of Rh-B's H-aggregate was observed in CNFs suspension. The pronounced aggregation in suspensions originated from the strong interaction between negatively charged carboxylate ions and the dye. The aggregation behavior was discussed with deconvoluted absorption spectra. Fluorescence spectroscopy studies revealed a significant reduction in the fluorescence intensity of the dye in CNFs suspension due to H-aggregates. Furthermore, the presence of H-aggregates in the suspensions caused a decrease in the quantum yield of Rh-B compared to that in deionized water.

Recent advances in cellulose nanocrystals-based antimicrobial agents

Over the past five years, there has been growing interest in the design of modified cellulose nanocrystals (CNCs) as nanoscale antimicrobial agents in potential end-user applications such as food preservation/packaging, additive manufacturing, biomedical and water purification. The interest of applying CNCs-based antimicrobial agents arise due to their abilities to be derived from renewable bioresources and their excellent physicochemical properties including rod-like morphologies, large specific surface area, low toxicity, biocompatibility, biodegradability and sustainability. The presence of ample surface hydroxyl groups further allows easy chemical surface modifications for the design of advanced functional CNCs-based antimicrobial materials. Furthermore, CNCs are used to support antimicrobial agents that are subjected to instability issues. The current review summarizes recent progress in CNC-inorganic hybrid-based materials (Ag and Zn nanoparticles, other metal/metal oxide) and CNC-organic hybrid-based materials (polymers, chitosan, simple organic molecules). It focuses on their design, syntheses and applications with a brief discussion on their probable modes of antimicrobial action whereby the roles of CNCs and/or the antimicrobial agents are highlighted.

Effect of cellulose nanocrystals and green synthesized silver nanoparticles on mechanical properties and antimicrobial activity of banana flour/agar composite films

This study characterized the physicochemical and functional properties of nanocomposite films synthesized by incorporating cotton linter cellulose nanocrystals (CN) and green silver nanoparticles (AgNPs) into banana flour/agar. The results showed that CN could not enhance the tensile strength of the B/A nanocomposite films, but it did prolong the antibacterial activity against the Gram-positive bacterium Listeria monocytogenes when combined with AgNPs. However, the binary blend of CN and AgNPs resulted in a flocculated morphology on the film surface, causing an increase in the film brittleness and a decrease in the water solubility, elongation, and final decomposition temperature. Unfortunately, none of the nanocomposite films were found to inhibit the growth of the Gram-negative species Escherichia coli within 12 h. Further research is needed to assess the migration release of CN/AgNPs in nanocomposite films and to determine their potential for use as active food packaging.

In situ synthesis of Ag/Ag2O-cellulose/chitosan nanocomposites via adjusting KOH concentration for improved photocatalytic and antibacterial applications

This work proposed a facile way to construct cellulose/chitosan-loaded Ag/Ag₂O nanocomposite films (ACC) from alkali/urea solution by increasing the content of alkali KOH in the solvent. The saturated alkali and hydroxyl groups of the cellulose and chitosan chains were accelerated to convert AgNO₃ to Ag⁰. Ag₂O served as nuclei to lower the energy barrier. The formation of Ag/Ag₂O nanoparticles (NPs) endowed the cellulose bio-reduced Ag composites with multifunction and stronger photocatalytic activity. Ag/Ag₂O NPs with the diameter of 139-360 nm were uniformly dispersed in the composite films, resulting in superior mechanical properties (64.6 MPa) and thermal stability. Almost 92 % of methyl orange was degraded under UV-irradiation within 40 min by ACC. After 3 runs of degradation, the photocatalytic abilities of ACC remained. Moreover, the films exhibited good antibacterial activities. The width of inhibition zones around ACC reached 9.2-12 mm and 8.6-10.4 mm for S. aureus and E. coli. The strategy provided a new avenue to construct multifunctional cellulose/chitosan materials for various applications, such as wastewater treatment, and electrocatalysis.

Potential effects of nano-cellulose and nano-silica/polyvinyl alcohol nanocomposites in the strengthening of dyed paper manuscripts with madder: an experimental study

In the present work, the composite cross-linked were used to consolidate the dyed paper manuscripts. Nanocomposites of mesoporous silica nanoparticle (MPSNP)/polyvinyl alcohol (PVA) and cellulose nanofiber (CNF)/PVA, which have never been used before, have been evaluated for the consolidation process of the dyed paper manuscripts with madder extract. Three concentrations 1%, 3%, and 5% have been prepared. Analysis and investigation methods like scanning electron microscope (SEM), transmission electron microscope (TEM), dynamic light scattering analysis (DLS), X-Ray diffraction Analysis (XRD), atomic force microscope (AFM), Fourier transform infrared spectroscopy (FTIR) and total color difference (ΔE) by spectrophotometer have been used in order to characterize the prepared nano-sized composites and evaluate the treated dyed paper samples before and after the aging process. The results of surface morphology by SEM revealed the effectiveness of MPSNP/PVA core-shell nanocomposite at 5% in the consolidation process, where the improvement of properties of the aged dyed paper samples. The fibers of the treated paper became strong and appeared clearly. The result of ΔE measurements showed that the treated sample with MPSNP/PVA nanocomposite at 5% gave the lowest ΔE (5.22), while, the treated sample with CNF/PVA nanocomposite at 5% gave the highest ΔE value (11.66). Mechanical measurements (tensile strength and elongation) revealed the efficiency of MPSNP/PVA nanocomposite at 5% in the treatment of the aged dyed paper samples. The treated sample with the mentioned material gave tensile strength and elongation values of 84.8 N/nm² and 1.736%, respectively. In contrast, the treated sample with CNF/PVA nanocomposite at 1% gave the lowest tensile strength and elongation values 38.2 N/nm², and 1.166%, respectively. FTIR analysis revealed an increase was noticed in the CH₂ stretching band (refers to the crystallinity of cellulose), where the intensity of the treated sample with MPSNP/PVA nanocomposite was at a 5% increase compared to the control sample. The FTIR results supported the results of mechanical measurements. The intensity of the CH₂ stretching band, which refers to the crystallinity index of cellulose, was increased with the use of MPSNP/PVA nanocomposite at 3% and 5%, which explains the improvement in mechanical properties. This may be due to the nano-mineral particles, which improve the mechanical properties. Additionally, they reduce the effect of accelerated thermal aging on the cellulosic fibers and give them stability. The detailed analysis of analytical methods used for evaluation revealed the novelty of MPSNP/PVA nanocomposite, especially at 5%. It has a potential role in strengthening and improving different properties of the dyed paper manuscripts with madder extract.

Nanocellulose for Paper and Textile Coating: The Importance of Surface Chemistry

Nanocellulose has received enormous scientific interest for its abundance, easy manufacturing, biodegradability, and low cost. Cellulose nanocrystals (CNCs) and cellulose nanofibers (CNFs) are ideal candidates to replace plastic coating in the textile and paper industry. Thanks to their capacity to form an interconnected network kept together by hydrogen bonds, nanocelluloses perform an unprecedented strengthening action towards cellulose- and other fiber-based materials. Furthermore, nanocellulose use implies greener application procedures, such as deposition from water. The surface chemistry of nanocellulose plays a pivotal role in influencing the performance of the coating: tailored surface functionalization can introduce several properties, such as gas or grease barrier, hydrophobicity, antibacterial and anti-UV behavior. This review summarizes recent achievements in the use of nanocellulose for paper and textile coating, evidencing critical aspects of coating performances related to deposition technique, nanocellulose morphology, and surface functionalization. Furthermore, beyond focusing on the aspects strictly related to large-scale coating applications for paper and textile industries, this review includes recent achievements in the use of nanocellulose coating for the safeguarding of Cultural Heritage, an extremely noble and interesting emerging application of nanocellulose, focusing on consolidation of historical paper and archaeological textile. Finally, nanocellulose use in electronic devices as an electrode modifier is highlighted.

Photodegradation of Pharmaceutical Pollutants: New Photocatalytic Systems Based on 3D Printed Scaffold-Supported Ag/TiO2 Nanocomposite

Due to the release of active pharmaceutical compounds in wastewater and their persistence in the environment, dangerous consequences can develop in the aquatic and terrestrial organisms. Chitosan/Ag/TiO2 3D printed scaffolds, at different Ag nanoparticle concentrations (10, 100, 1000 ppm) are investigated here as promising materials for photocatalytic degradation under the UV–Vis irradiation of pharmaceutical compounds in wastewater. As target drugs, amoxicillin, paracetamol and their 1:1 mix were selected. Ag nanoparticles increase the photocatalytic efficiency of the system based on titanium dioxide embedded in the chitosan scaffold: in the presence of Chitosan/Ag100/TiO2, the selected pharmaceuticals (PhCs), monitored by UV–Vis spectroscopy, are completely removed in about 2 h. The photodegradation products of the PhCs were identified by Liquid Chromatography–Mass Spectroscopy and assessed for their toxicological impact on six different bacterial strains: no antibacterial activity was found towards the tested strains. This new system based on Ag/TiO2 supported on 3D chitosan scaffolds may represent an effective strategy to reduce wastewater pollution by emerging contaminants.

Green Extraction of Cellulose Nanocrystals of Polymorph II from Cynara scolymus L.: Challenge for a “Zero Waste” Economy

The increase of agri-food wastes by agriculture and industries is one of the main causes of environmental pollution. Here we propose the recycling of Cynara scolymus L. wastes to obtain polymorph II cellulose nanocrystals (CNC). Two different extraction procedures are compared: (i) Soxhlet extraction in an ethanol/toluene mixture, and (ii) water boiling of the agricultural waste. Both procedures were followed by purification of cellulose fibers through bleaching treatments and extraction of cellulose nanocrystals by acid hydrolysis. CNCs have been extensively characterized by FTIR spectroscopy, electrophoretic light scattering measurements, X-ray powder diffraction methods, transmission electron microscopy, and thermogravimetric analyses. Extracted CNC are rod-like-shaped polymorph IIs with a good crystallinity index, and they are characterized by high hydrogen bonding intensity. The ELS measurements on samples from both procedures show good results regarding the stability of the CNC II sol (ζ < −40 ± 5 mV), comparable to that of the CNC polymorph I. Both polymorph II CNCs show better thermal stability, compared to CNC I. The results show that the easy extraction procedure from agricultural Cynara scolymus L. waste can be used to produce high-quality cellulose nanocrystals as a green alternative to the commonly used synthetic route.

Recent Developments in the Application of Inorganic Nanomaterials and Nanosystems for the Protection of Cultural Heritage Organic Artifacts

Cultural heritage (CH) represents human identity and evidence of the existence and activities that people have left over time. In response to the action of aggressive degrading factors, different materials have been developed and used to protect cultural heritage artifacts. The discovery of optimal materials for this purpose also raises several problems, mainly related to their compatibility with the support material, the most important aspect being that they must preserve their aesthetic characteristics. In this context, the present review paper aims to provide a critical discussion about the possibilities of using different inorganic nanomaterials and recipes for the conservation of cultural heritage objects of organic nature (such as paper, wood, and other support materials). In addition, also are covered different aspect concerning protection mechanisms and application methods as well as future perspectives in this area.

Markedly improved hydrophobicity of cellulose film via a simple one-step aminosilane-assisted ball milling

Most cellulose products lack water resistance due to the existence of abundant hydroxyl groups. In this work, microfibrillated cellulose (MFC) was modified via 3-aminopropyltriethoxysilane (APTES)-assisted ball milling. Under the synergism between high-energy mechanical force field and APTES-modification, the fibrillation and hydrophobization of MFC were achieved simultaneously. Free-standing translucent cellulose films made of modified MFC were fabricated. The original crystal form of cellulose is maintained. The hydrophobicity of cellulose film markedly increases and the water contact angle goes up to 133.2 ± 3.4°, which might be ascribed to the combined effects of APTES-modification and rough film surface. In addition, the thermostability and mechanical properties of cellulose film are also improved via mechanochemical modification. This work provides a novel one-step fibrillation-hydrophobization method for cellulose.

Toward a Reversible Consolidation of Paper Materials Using Cellulose Nanocrystals

An innovative consolidation strategy for degraded paper is presented based on the reversible application of cellulose nanocrystals as sustainable fillers to reinforce mechanical properties and resistance to further degradation. The compatibility and efficacy of the proposed consolidation treatment are assessed first on pure cellulose paper, used as a model, by reliable techniques such as field emission scanning electron microscopy, atomic force microscopy, tensile tests, X-ray powder diffraction, and Fourier transform infrared spectroscopy, evidencing the influence of the surface functionalization of nanocellulose on the consolidation and protection effects. Then, the consolidation technique is applied to real aged paper samples from Breviarium romanum ad usum Fratrum Minorum S.P. (1738), demonstrating the promising potential of the suggested approach. Amperometric measurements, carried out with a smart electrochemical tool developed in our laboratory, demonstrate the reversibility of the proposed treatment by removal of the nanocrystalline cellulose from the paper surface with a suitable cleaning hydrogel. This completely new feature of the consolidation treatment proposed here satisfies a pivotal requisite in cultural heritage conservation because the methodological requirement for the ″reversibility″ of any conservation measure is a fundamental goal for restorers. A paper artifact, in fact, is subject to a number of natural and man-made hazards, inducing continuous degradation. With time, monitoring and consolidation actions need to be often performed to ensure conservation, and this tends to modify the status quo and compromise the artifact integrity. Removable treatments can potentially avoid erosion of the artifact integrity.

Graphene Derivatives in Biopolymer-Based Composites for Food Packaging Applications

This review aims to showcase the current use of graphene derivatives, graphene-based nanomaterials in particular, in biopolymer-based composites for food packaging applications. A brief introduction regarding the valuable attributes of available and emergent bioplastic materials is made so that their contributions to the packaging field can be understood. Furthermore, their drawbacks are also disclosed to highlight the benefits that graphene derivatives can bring to bio-based formulations, from physicochemical to mechanical, barrier, and functional properties as antioxidant activity or electrical conductivity. The reported improvements in biopolymer-based composites carried out by graphene derivatives in the last three years are discussed, pointing to their potential for innovative food packaging applications such as electrically conductive food packaging.

Three-Dimensional (3D) Printed Silver Nanoparticles/Alginate/Nanocrystalline Cellulose Hydrogels: Study of the Antimicrobial and Cytotoxicity Efficacy

Here, a formulation of silver nanoparticles (AgNPs) and two natural polymers such as alginate (ALG) and nanocrystalline cellulose (CNC) was developed for the 3D printing of scaffolds with large surface area, improved mechanical resistance and sustained capabilities to promote antimicrobial and cytotoxic effects. Mechanical resistance, water content, morphological characterization and silver distribution of the scaffolds were provided. As for applications, a comparable antimicrobial potency against S. aureus and P. aeruginosa was demonstrated by in vitro tests as function of the AgNP concentration in the scaffold (Minimal Inhibitory Concentration value: 10 mg/mL). By reusing the 3D system the antimicrobial efficacy was demonstrated over at least three applications. The cytotoxicity effects caused by administration of AgNPs to hepatocellular carcinoma (HepG2) cell culture through ALG and ALG/CNC scaffold were discussed as a function of time and dose. Finally, the liquid chromatography-mass spectrometry (LC-MS) technique was used for targeted analysis of pro-apoptotic initiation and executioner caspases, anti-apoptotic and proliferative proteins and the hepatocyte growth factor, and provided insights about molecular mechanisms involved in cell death induction.