Novel design of Fe-Cu alloy coated cellulose nanocrystals with strong antibacterial ability and efficient Pb2+ removal

Bimetallic nanoparticles with sulfated galactan eliminate Vibrio parahaemolyticus in shrimp Penaeus vannamei

Bimetallic (Au/Ag) nanoparticles (BNPs) have shown enhanced antibacterial activity compared to their monometallic counterparts. Sulfated galactans (SG) are a naturally occurring polymer commonly found in red seaweed Gracilaria fisheri. They are biocompatible and biodegradable and environmentally friendly. In this study, we utilized SG in combination with BNPs to develop composite materials that potentially enhance antibacterial activity against shrimp pathogens Vibrio parahaemolyticus and Vibrio harveyi, compared to BNPs or SG alone. BNPs were coated with sulfated galactan (SGBNPs) and characterized using UV-vis spectroscopy, Fourier transform infrared (FTIR) spectroscopy, zeta potential, and transmission electron microscopy (TEM). UV-vis spectroscopy analysis revealed that the surface plasmon peaks of BNPs and SGBNPs appeared at 530 nm and 532 nm, respectively. Zeta potential measurements showed that SGBNPs had a negative charge of -32.4 mV, while the BNPs solution had a positive charge of 38.7 mV. TEM images demonstrated the spherical morphology of both BNPs and SGBNPs with narrow size distributions (3-10 nm). Analysis of the FTIR spectra indicated that SG maintained its backbone structure in SGBNPs, but some functional groups were altered. Notably, SGBNPs showed superior antimicrobial and antibiofilm activities against V. parahaemolyticus and V. harveyi compared to SG and BNPs. Furthermore, treatment with SGBNPs significantly down-regulated the expression of virulence-related genes (toxR, cpsQ, and mfpA) for V. parahaemolyticus 3HP compared to the respective control, bacteria treated with BNPs or SG. Diets supplemented with SGBNPs, BNPs, or SG showed no detrimental impact on the growth of shrimp Penaeus vannamei. Shrimp fed with SGBNPs-supplemented feed showed significantly higher survival rates than those fed with BNPs-supplemented feed when infected with 3HP after being on the supplemented feed for seven days and a subsequent number of fifteen days. These findings collectively demonstrate the benefit of using SG capped Au-Ag BNPs as an antibacterial agent for the prevention and control of Vibrio sp. Infection in shrimp while reducing the risk of environmental contamination.

Application of fluidized bed homogeneous crystallization for simultaneous recovery of Fe(II) and Cu(II) as particles from wastewater

The mixture of copper and iron often results in materials with favorable properties. The material production processes involving these metals including electroplating produce hazardous wastewater. In this study, the Fluidized Bed Homogeneous Crystallization (FBHC) process was applied to treat iron and copper-containing wastewater. The initial iron copper particles were successfully recovered from synthetic wastewater with [Fe]0:[Cu]0 of 2:1, the total metal concentration of 3 mM, at effluent pH = 7.75 ± 0.75, with the upflow velocity (U) of 1.76 m/h. The agglomerates hardening process is a crucial step for initial particle synthesis. The SEM analysis reveals the spherical particle's densified crust and porous core. The particle formation mechanism which includes the formation of the nucleus, attachment of precipitate flakes, and densification of particles was proposed after microscopic observation. The initial particles synthesized were used to initiate the treatment of synthetic wastewater at the operating condition pH = 7.75 ± 0.5, [Fe]0:[Cu]0 of 2:1, the total metal concentration of 3 mM, [CO32-]0:[M]0 = 1.2:1, and U of 28.66 m/h which results in the total metal removal of 99% and crystallization ratio of 90% and 88% for iron and copper respectively. The conditions were then applied to treat electroplating wastewater and resulted in the total metal removal of 99% for both iron and copper and a crystallization ratio of 83% and 79% for iron and copper, respectively. The treatment provided advantages in terms of treating larger amounts of sludge while eliminating the need to provide seed thus yielding a higher purity of product.

TEMPO oxidized cellulose nanocrystal (TOCNC) scaffolded nanoscale zero-valent iron (nZVI) for enhanced chromium removal

The conventional carboxymethyl cellulose (CMC) stabilization hampered available active sites of adsorption and reduction, due to irregular shape of nanoscale zero-valent iron (nZVI) particles with augmented average size and passivated surface, leading to insufficient removal and poor resistance against complex environmental conditions. Herein, we presented (2,2,6,6-Tetramethylpiperidine-1-oxyl)-mediated (TEMPO-mediated) oxidation of cellulose nanocrystal (TOCNC) scaffolded nZVI (nZVI@TOCNC) with enhanced efficiency for chromium removal in comparison with CMC stabilized nZVI (nZVI@CMC). The anchoring of nZVI at the functional sites of TOCNC was initiated by liquid-phase chemical reduction method. The nZVI@TOCNC showed improved nZVI distribution with uniform particle size and thinner shell (∼1 nm). Characterizations using FT-IR, XPS and XRD demonstrated that bindings between TOCNC and nZVI were through hydrogen bonds, electrostatic attractions, coordination-covalent bonds and bidentate chelation. TOCNC with shorter branch-chain (-COC-) surrounding the nZVI could potentially form a porous and compact "mesh" to rigidly encapsulate nZVI, while CMC wrapped around nZVI in the way of traditional polymeric stabilizers. Thus, 0.5 g/L nZVI@TOCNC achieved 99.96% Cr (Ⅵ) removal efficiency (20 mg/L) at pH = 7 and the removal capacity were up to 55.86 mg/g. The nZVI@TOCNC consistently presented higher removal efficiency than nZVI@CMC under wide pH range (3-7). Cr (Ⅵ) was reduced to Cr (Ⅲ) by nZVI@TOCNC with deposition of CrxFe1-x (OH)3 and Cr2O3. The predominant mechanisms of removal probably consisted of electrostatic attractions, reduction, co-precipitation and surface complexation. The pseudo-second-order kinetic model well-fitted the sorption kinetic, indicating TOCNC scaffold stabilized nZVI for efficient reduction of Cr (Ⅵ) through multi-layer adsorption. As a template and delivery carrier, TOCNC shows promising potential to further improve the capability and practice of nZVI for in situ treatment of industrial waste water with heavy metal pollution.

Efficient removal of chloroform from groundwater using activated percarbonate by cellulose nanofiber-supported Fe/Cu nanocomposites

Chloroform (CF) is a recalcitrant halogenated methane (HM) that has received widespread attention due to its frequent detection in groundwater and its potential carcinogenic risk. In this study, TEMPO-oxidized cellulose nanofiber-supported iron/copper bimetallic nanoparticles (TOCNF-Fe/Cu), a novel composite catalyst, was synthesized to activate sodium percarbonate (SPC) for the removal of CF from groundwater. The results showed that over 96.3% of CF could be removed in a neutral reaction medium (pH 6.5-9) within 180 min using 0.66 g L-1 of TOCNF (0.32)-Fe/Cu (1) and 1 mM of SPC, which outperforms typical advanced oxidation processes. The reaction mechanism of the TOCNF-Fe/Cu-SPC system for the CF removal was elucidated. As demonstrated through electron paramagnetic resonance and quenching experiments, the TOCNF-Fe/Cu-SPC system was found to include •OH and O2•-, where the latter played a dominant role in the CF removal. DFT calculations indicated that TOCNF improved the electron transport capability of Fe/Cu and reduced the transition state energy. The Fe species on the surface of TOCNF-Fe/Cu were identified as the primary active sites for SPC activation, whereas the Cu species were beneficial to the regeneration of the Fe species. Additionally, TOCNF-Fe/Cu was found to have good recyclability and stability. The feasibility of the TOCNF-Fe/Cu-SPC system was further confirmed by applying it for the efficient removal of composite HMs from actually contaminated groundwater. Overall, the TOCNF-Fe/Cu-SPC system is an attractive candidate for the treatment of HM-contaminated groundwater.

Development of antibacterial nanocomposites by combination of bacterial cellulose/chitin nanofibrils and all-natural bioactive nanoparticles

In this study, a functional composite membrane was facilely fabricated by using a dual nanofibril system of bacterial cellulose (BC) and chitin (CH) nanofibrils as bio-based building blocks. The BC-CH membranes with enhanced antibacterial activity were constructed by incorporation of all-natural bioactive nanoparticles (GBTPs), which were formed by spontaneous molecular interactions of three naturally occurring active small molecules, i.e., glycyrrhizic acid (GA), berberine (BR), and tannic acid (TA). The microstructure, physicochemical properties, and antibacterial behaviors of the resulting BC-CH-GBTPs nanocomposites were then characterized. The obtained results showed that the GBTPs with a diameter of around 50-100 nm and membrane matrix were bound by non-covalent interactions, and the addition of GBTPs did not compromise the structural integrity and thermal stability of the composites, which retained good mechanical properties. Furthermore, the addition of GBTPs led to a rougher surface structure and increased the water contact angle of the membrane surfaces from 48.13° to 59.80°. The antimicrobial tests indicate that the BC-CH-GBTPs nanocomposites exhibited significant inhibitory effects against Escherichia coli and Staphylococcus aureus, showing a satisfactory antibacterial ability. These results suggest that the BC-CH-GBTPs nanocomposites based on all-natural, plant-based building blocks, hold promising potentials as active packaging materials for sustainable applications.

Recent advances in cellulose nanocrystals-based antimicrobial agents

Over the past five years, there has been growing interest in the design of modified cellulose nanocrystals (CNCs) as nanoscale antimicrobial agents in potential end-user applications such as food preservation/packaging, additive manufacturing, biomedical and water purification. The interest of applying CNCs-based antimicrobial agents arise due to their abilities to be derived from renewable bioresources and their excellent physicochemical properties including rod-like morphologies, large specific surface area, low toxicity, biocompatibility, biodegradability and sustainability. The presence of ample surface hydroxyl groups further allows easy chemical surface modifications for the design of advanced functional CNCs-based antimicrobial materials. Furthermore, CNCs are used to support antimicrobial agents that are subjected to instability issues. The current review summarizes recent progress in CNC-inorganic hybrid-based materials (Ag and Zn nanoparticles, other metal/metal oxide) and CNC-organic hybrid-based materials (polymers, chitosan, simple organic molecules). It focuses on their design, syntheses and applications with a brief discussion on their probable modes of antimicrobial action whereby the roles of CNCs and/or the antimicrobial agents are highlighted.

Cellulose Nanocrystals (CNCs) and Cellulose Nanofibers (CNFs) as Adsorbents of Heavy Metal Ions

The isolation of nanocellulose has been extensively investigated due to the growing demand for sustainable green materials. Cellulose nanocrystals (CNCs) and cellulose nanofibers (CNFs), which have the same chemical composition but have different morphology, particle size, crystallinity, and other properties depending on the precursor and the synthesis method used. In comparison, CNC particles have a short rod-like shape and have smaller particle dimensions when compared to CNF particles in the form of fibers. CNC synthesis was carried out chemically (hydrolysis method), and CNF synthesis was carried out mechanically (homogenization, ball milling, and grinding), and both can be modified because they have a large surface area and are rich in hydroxyl groups. Modifications were made to increase the adsorption ability of heavy metal ions. The Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermogravimetric (TG), and dynamic light scattering (DLS) can reveal the characteristics and morphology of CNCs and CNFs. The success and effectiveness of the heavy metal adsorption process are influenced by a few factors. These factors include adsorbent chemical structure changes, adsorbent surface area, the availability of active sites on the adsorbent’s surface, adsorption constants, heavy metal ionic size differences, pH, temperature, adsorbent dosage, and contact time during the adsorption process. In this review, we will discuss the characteristics of CNCs and CNFs synthesized from various precursors and methods, the modification methods, and the application of CNCs and CNFs as heavy metal ion adsorbents, which includes suitable isotherm and kinetics models and the effect of pH on the selectivity of various types of heavy metal ions.

Preparation and modification of nanocellulose and its application to heavy metal adsorption: A review

Heavy metals are a notable pollutant in aquatic ecosystems that results in many deadly diseases of the human body after enrichment through the food chain. As an environmentally friendly renewable resource, nanocellulose can be competitive with other materials at removing heavy metal ions due to its large specific surface area, high mechanical strength, biocompatibility and low cost. In this review, the research status of modified nanocellulose for heavy metal adsorbents is primarily reviewed. Two primary forms of nanocellulose are cellulose nanocrystals (CNCs) and cellulose nanofibers (CNFs). The preparation process of nanocellulose was derived from natural plants, and the preparation process included noncellulosic constituent removal and extraction of nanocellulose. Focusing on heavy metal adsorption, the modification of nanocellulose was explored in depth, including direct modification methods, surface grafting modification methods based on free radical polymerization and physical activation. The adsorption principles of nanocellulose-based adsorbents when removing heavy metals are analyzed in detail. This review may further facilitate the application of the modified nanocellulose in the field of heavy metal removal.

Synthesis and Characterization of Novel Core-Shell ZnO@SiO2 Nanoparticles and Application in Antibiotic and Bacteria Removal

A novel core-shell nanomaterial, ZnO@SiO₂, based on rice husk for antibiotic and bacteria removal, was successfully fabricated. The ZnO@SiO₂ nanoparticles were characterized by X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDX), Fourier transform infrared (FTIR) spectroscopy, transmission electron microscopy (TEM), photoluminescence spectroscopy (PL), Brunauer-Emmett-Teller (BET) method, diffuse reflectance ultraviolet-vis (DR-UV-vis) spectroscopy, X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, and ζ-potential measurements. β-Lactam antibiotic amoxicillin (AMX) was removed using ZnO@SiO₂ nanoparticles with an efficiency greater than 90%, while Escherichia coli removal was higher than 91%. The optimum effective conditions for AMX removal using ZnO@SiO₂, including solution pH, adsorption time, and ZnO@SiO₂ dosage, were 8, 90 min, and 25 mg/mL, respectively. The maximum adsorption capacity reached 52.1 mg/g, much higher than those for other adsorbents. Adsorption isotherms of AMX on ZnO@SiO₂ were more in accordance with the Freundlich model than the Langmuir model. The electrostatic attraction between negative species of AMX and the positively charged ZnO@SiO₂ surface induced adsorption, while the removal of E. coli was governed by both electrostatic and hydrophobic interactions. Our study demonstrates that ZnO@SiO₂ based on rice husk is a useful core-shell nanomaterial for antibiotic and bacteria removal from water.

A Review on Nanocellulose and Superhydrophobic Features for Advanced Water Treatment

Globally, developing countries require access to safe drinking water to support human health and facilitate long-term sustainable development, in which waste management and control are critical tasks. As the most plentiful, renewable biopolymer on earth, cellulose has significant utility in the delivery of potable water for human consumption. Herein, recent developments in the application of nanoscale cellulose and cellulose derivatives for water treatment are reviewed, with reference to the properties and structure of the material. The potential application of nanocellulose as a primary component for water treatment is linked to its high aspect ratio, high surface area, and the high number of hydroxyl groups available for molecular interaction with heavy metals, dyes, oil-water separation, and other chemical impurities. The ability of superhydrophobic nanocellulose-based textiles as functional fabrics is particularly acknowledged as designed structures for advanced water treatment systems. This review covers the adsorption of heavy metals and chemical impurities like dyes, oil-water separation, as well as nanocellulose and nanostructured derivative membranes, and superhydrophobic coatings, suitable for adsorbing chemical and biological pollutants, including microorganisms.

Novel metal based nanocomposite for rapid and efficient removal of lead from contaminated wastewater sorption kinetics, thermodynamics and mechanisms

A sol–gel method was utilized to prepare a novel nanocomposite adsorbent (nMgO/bentonite) and was tested for Pb(II) removal from aqueous solutions. The produced nanocomposite was investigated using, SEM–EDX, XRD, and FTIR analyses before and after Pb adsorption. Adsorption equilibrium and kinetic experiments were run in batch system under different conditions of pH, adsorbent dose, competitive cations, contact time and temperature. The results exhibited rapid Pb(II) adsorption by the nanocomposite in the first five min. Experimental lead adsorption equilibrium and kinetics data fitted well to Langmuir and power function models, respectively as indicated from the lowest standard error (SE) values. The calculated Langmuir maximum adsorption capacity (q_max) value of nanocomposite (75 mg g⁻¹) was 4.5 times higher than that of bentonite (16.66 mg g⁻¹). Moreover, the highest quantity of Pb(II) uptake was achieved at temperature of 307 K and pH 9. The Langmuir sorption capacity of the nanocomposite for Pb(II) increased from 75 to 145 mg g⁻¹ with increasing temperature from 287 to 307 K. The thermodynamic parameters of Pb(II) adsorption by the nanocomposite affirm the spontaneous and endothermic nature of the adsorption process. Lead adsorption mechanisms by the nanocomposite were proposed and discussed.

Preparation and characterization of cellulose nanocrystals from spent edible fungus substrate

BACKGROUND

Spent edible fungus substrates were identified as potential sources to produce cellulose derivatives, namely purified cellulose and dicarboxyl cellulose nanocrystal (DCNC). Purified celluloses were obtained via chemical treatments and then oxidized by sequential periodate-chlorite without mechanical process. The structural properties of the DCNCs were characterized by transmission electron microscopy (TEM), Fourier-transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD) and thermal gravimetric analysis (TGA).

RESULTS

XRD results showed that the cellulose I structure was maintained, however, the crystallinity index decreased after oxidation process. The initial pyrolysis temperature of DCNCs ranged from 242 to 344 °C. TEM results revealed that DCNC was rod-shaped with an average length and width of 130.88 nm and 7.3 nm, respectively. The average specific surface area (SSA) was 366.67 m²  g^-1 . The carboxyl content was around 3.485 mmol g^-1 . Finally, the adsorption capacity for contaminations was 76.98, 126.22, 64.44 and 9.63 mg g^-1 for copper ion (Cu²⁺ ), lead ion (Pb²⁺ ), chromium (Cr³⁺ ) and amoxicillin (AMX), respectively.

CONCLUSION

This work showed a sequentially chemical oxidation for preparing nanocellulose from secondary agricultural waste with many functional applications. © 2021 Society of Chemical Industry.

Cellulose nanofiber derived carbon aerogel with 3D multiscale pore architecture for high-performance supercapacitors

Carbon materials are highly promising electrode materials for supercapacitors, due to their hierarchical porous structure and large specific surface area. However, the limited specific capacitance and inferior rate capability significantly prevent their practical application. Herein, 3D interconnected hierarchical porous carbon aerogels (CNFAs) through engineering the pyrolysis chemistry of CNF are developed. The obtained CNFAs effectively improve the carbon yield and suppress the volume shrinkage, as well as have robust mechanical properties. As a supercapacitor electrode, the CNFAs-17% electrode exhibits an ultrahigh capacitance of 440.29 F g^-1 at 1 A g^-1, significantly superior to most reported biomass-based carbon materials. Moreover, the CNFAs-17% assembled symmetric supercapacitor (SSC) achieves an outstanding rate capability (63.29% at 10 mA cm^-2), high areal energy density (0.081 mWh cm^-2), and remarkable cycling stability (nearly 100% capacitance retention after 7000 cycles). This work offers a simple, effective strategy towards the preparation of promising electrode materials for high-performance energy storage applications.

Potential of nanocellulose for wastewater treatment

Wastewater management has significant interest worldwide to establish viable treatment techniques to ensure the availability of clean water. The specialities of nanocellulose for this particular application is due to their high aspect ratio and accessibility of plenty of -OH groups for binding with dyes, heavy metals and other pollutants. This review aggregates the application of nanocellulose for wastewater treatment particularly as adsorbents of dyes and heavy metals, and also as membranes for filtering various other contaminants including microbes. The membrane technologies are proven to be effective relating to their durability and separation effectiveness. The commercial scale application of nanocellulose based materials in water treatment processes depend on various factors like routes of synthesis, surface modifications, hydrophilic/hydrophobic, porosity, durability etc. The recent developments on production of novel adsorbents or membranes encourage the implementation of nanocellulose based cleaner technologies for wastewater treatment.

Versatile nanocellulose-based nanohybrids: A promising-new class for active packaging applications

The food packaging industry is rapidly growing as a consequence of the development of nanotechnology and changing consumers' preferences for food quality and safety. In today's globalization of markets, active packaging has achieved many advantages with the capability to absorb or release substances for prolonging the food shelf life over the traditional one. Therefore, it is critical to developing multifunctional active packaging materials from biodegradable polymers with active agents to decrease environmental challenges. This review article addresses the recent advances in nanocelluloses (NCs)- baseds nanohybrids with new function features in packaging, focusing on the various synthesis methods of NCs-based nanohybrids, and their reinforcing effects as active agents on food packaging properties. The applications of NCs-based nanohybrids as antioxidants, antimicrobial agents, and UV blocker absorbers for prolonging food shelf-life are also reviewed. Overall, these advantages make the CNs-based nanohybrids with versatile properties promising in food and packaging industries, which will impact more readership with concern for future research.

Starch, cellulose, pectin, gum, alginate, chitin and chitosan derived (nano)materials for sustainable water treatment: A review

Natural biopolymers, polymeric organic molecules produced by living organisms and/or renewable resources, are considered greener, sustainable, and eco-friendly materials. Natural polysaccharides comprising cellulose, chitin/chitosan, starch, gum, alginate, and pectin are sustainable materials owing to their outstanding structural features, abundant availability, and nontoxicity, ease of modification, biocompatibility, and promissing potentials. Plentiful polysaccharides have been utilized for making assorted (nano)catalysts in recent years; fabrication of polysaccharides-supported metal/metal oxide (nano)materials is one of the effective strategies in nanotechnology. Water is one of the world's foremost environmental stress concerns. Nanomaterial-adorned polysaccharides-based entities have functioned as novel and more efficient (nano)catalysts or sorbents in eliminating an array of aqueous pollutants and contaminants, including ionic metals and organic/inorganic pollutants from wastewater. This review encompasses recent advancements, trends and challenges for natural biopolymers assembled from renewable resources for exploitation in the production of starch, cellulose, pectin, gum, alginate, chitin and chitosan-derived (nano)materials.

One-pot synthesis of spherical nanoscale zero-valent iron/biochar composites for efficient removal of Pb(ii)

In this study, a spherical Fe/C composite (AIBC) was successfully prepared via carbonization of Fe³⁺-crosslinked sodium alginate. The removal capacity and mechanism of AIBC were evaluated for the adsorption of Pb(ii) from aqueous solution and compared with that of commercial nanoscale zero-valent iron (nZVI). The effects of the initial concentration, pH of Pb(ii) solution, the contact time, coexisting anions, and aging under air were investigated. The results showed that the pH had a strong impact on the adsorption of Pb(ii) by AIBC. The adsorption data for AIBC followed the Langmuir model, while the maximum adsorption capacity at pH 5 was 1881.73 mg g⁻¹. The AIBC had a higher adsorption capability than nZVI, especially under the condition of relatively high Pb(ii) concentrations. The oxidation–reduction reaction between Fe and Pb(ii) was the main mechanism for the adsorption of Pb(ii) onto nZVI. AIBC converted the largest amount of Pb(ii) into PbO·XH₂O/Pb(OH)₂ mainly by generating Fe²⁺.

In this study, a spherical Fe/C composite (AIBC) was successfully prepared via carbonization of Fe³⁺-crosslinked sodium alginate.

Synthesis of bimetallic silver-gold nanoparticle composites using a cellulose dope: Tunable nanostructure and its biological activity

Introducing functional metal nanoparticles (NPs) into flexible substrate is being increasingly attempted to expand their application. Here, we extend the synthesis of cellulose to its unmodified dope achieving freestanding nanocomposite decorated with bimetallic Ag-Au NPs through the one pot reaction. In the procedure, cellulose chain not only acts as a reducing agent but also a biocompatible support for NPs with a mean size of 7.9-9.7 nm. Meanwhile, changing the addition order of Ag⁺ and AuCl₄^- generated different atom arrangement in the bimetallic NPs. Moreover, the correlation of bioactivity to NP atom arrangement was studied. The result revealed that the nanocomposite containing NPs with an ultrathin Ag-rich outermost shell around an Au-rich core showed better bactericidal ability while lower cytotoxicity. In addition, the nanocomposite exhibited a sensitive SERS property for determination of R6G with a high enhancement factor of 10⁸.