Fabrication of thiophene-chitosan hydrogel-trap for efficient immobilization of mercury (II) from aqueous environs

Selective removal of Hg(II) by chitosan derivative covalently modified with double cross-linking agents abundant in N and S atoms

With rapid industrialization and urbanization, numerous wastewater contains elevated concentration of Hg(II), and its concentration must be reduced to the discharge limit, so as not to cause serious pollution to the environment. In this paper, a modified chitosan adsorbent material, AMT-DMTD-CS (CS = chitosan, AMT = 2-amino-5-mercapto-1,3,4-thiadiazole, DMTD = 1,3,4-thiadiazole-2,5-dithiol) was prepared. FT-IR, XPS, elemental analysis, and FE-SEM confirmed that AMT and DMTD were successfully grafted covalently onto CS, with BET analysis showing a specific surface area of 105.55 m2/g for AMT-DMTD-CS. Adsorption study suggests that the optimal pH environment for AMT-DMTD-CS to adsorb Hg(II) is 4.0, and the saturated uptake capacity reaches 687.17 mg/g at 318 K, even after eight regenerations, the removal is still maintained at 80.06 %. Moreover, the adsorption behavior is in perfect agreement with the pseudo-second order kinetic model and the Langmuir isotherm model. In addition, AMT-DMTD-CS shows quite favorable selectivity for Hg(II) in a variety of co-existing metal ions. According to the FT-IR and XPS analysis of AMT-DMTD-CS-Hg(II), the synergistic complexation of -OH, -NH2, -NH, CN, CS and -SH to Hg(II) is considered as the main reason that leading to the elevated adsorption capacity.

Synthesis of Some Novel Thiophene Analogues as Potential Anticancer Agents

The aim of this study involves the synthesis novel thiophene analogues that can be used as anticancer medications through a strategic multicomponent reaction connecting ethyl 4-chloroacetoacetate (1), phenyl isothiocyanate, and a series of active methylene reagents, including ethyl acetoacetate (2), malononitrile, ethyl cyanoacetate, cyanoacetamide 6a-c, N-phenyl cyanoacetamide derivatives 13a-c, and acetoacetanilide derivatives 18. This reaction was facilitated by dry dimethylformamide with a catalytic quantity of K2CO3. The resultant thiophene derivatives were identified as 4, 8a-b, 9, 12a-d, 15a-c, and 20a-b. Further reaction of compound 4 with hydrazine hydrate yielded derivative 5, respectively. When compound 1 was refluxed with ethyl 3-mercapto-3-(phenylamino)-2-(p-substituted phenyldiazenyl)acrylate 10a-e in the presence of sodium ethoxide, it produced thiophene derivatives 12a-d. Comprehensive structural elucidation of these newly synthesized thiophene-analogues was accomplished via elemental and spectral analysis data. Furthermore, the study delves into the cytotoxicity of the newly synthesized thiophenes was evaluated using the HepG2, A2780, and A2780CP cell lines. The amino-thiophene derivative 15b exhibited an increased growth inhibition of A2780, and A2780CP with IC50 values 12±0.17, and 10±0.15 μM, respectively compared to Sorafenib with IC50 values 7.5±0.54 and 9.4±0.14. This research opens new avenues for developing thiophene-based anticancer agents.

Thiophene-based porphyrin polymers for Mercury (II) efficient removal in aqueous solution

Development of novel sulf-functionalized porous organic polymers (POPs) for Mercury (II) (Hg2+) removal is of great significant, but the adsorbents always suffered by the low adsorption capacity, stability, and efficiency for the reason that the common construction of functionalized POPs from the functionalized monomers or post-functionalization of the POPs always sacrifice the porosity. In this paper, porphyrin-based POPs with different heteroatoms were constructed through the aldehyde monomer (benzene, 2,5-thiophenedicarboxaldehyde and thieno[3,2-b]thiophene-2,5-dicarboxaldehyde) and pyrrole according to the Adler-Longo method. In this way, nitrogen (N) in pyrrole and sulfur (S) in thiophene structures were embed into the backbone structure of the polymers. The functional structures not only act as the linking building block into the stable cross-linking structure, but also offer abundant uncovered functional sites for Hg2+ adsorption, resulting the porphyrin-based POPs high Hg2+ capacity (1049 mg/g), removal efficiency (more than 99.9%), good reusability and selectivity for its highest heteroatoms contents. The adsorption mechanism confirmed the cooperative coordination of N in porphyrin and S in thiophene with Hg2+. This work confirmed the functional groups play more important role in heavy metal adsorption, and the embedded functional sites into backbone also promotes the stability and the adsorption performance.

Cr(VI) and doxorubicin adsorptive capture by a novel bionanocomposite of Ti-MOF@TiO2 incorporated with watermelon biochar and chitosan hydrogel

Biodegradable polymers, biochars and metal organic frameworks (MOFs) have manifested as top prospects for elimination of harmful pollutants. In the current study, Ti-MOF was synthesized and decorated with TiO2 nanoparticles, then embedded into watermelon peel biochar and functionalized with chitosan hydrogel to produce Ti-MOF@TiO2@WMPB@CTH. Various instruments were employed to assure the effective production of the bionanocomposite. The HR-TEM and SEM studies referred to excellent surface porosity and homogeneity of Ti-MOF@TiO2@WMPB@CTH bionanocomposite, with 51.02-74.23 nm. Based on the BET analysis, the mesoporous structure has a significant surface area of 366.04 m2 g-1 and a considerable total pore volume of 11.38 × 10-2 cm3 g-1, with a mean pore size of 12.434 nm. Removal of doxorubicin (DOX) and hexavalent chromium (Cr(VI)) was examined under various experimentations. Pseudo-second order kinetic models in addition to Langmuir isotherm offered the best fitting. Thermodynamic experiments of the two contaminants demonstrated spontaneous and endothermic interactions. After five subsequent adsorption and desorption cycles, Ti-MOF@TiO2@WMPB@CTH bionanocomposite demonstrated an exceptional recyclability for the elimination of DOX and Cr(VI) ions, reaching 97.96 % and 95.28 %, respectively. Finally, the newly designed Ti-MOF@TiO2@WMPB@CTH bionanocomposite demonstrated a high removing efficiency of Cr(VI) ions and DOX from samples of real water.

Physicochemical investigation of mercury sorption on mesoporous thioacetamide/chitosan from wastewater

Mercury is a toxic environmental element, so it was necessary to prepare a new, highly efficient, cheap sorbent to remove it. A mesoporous thioacetamide/chitosan (MTA/CS) was manufactured via a simplistic strategy; the chitin deacetylation to gain chitosan (CS) and the addition of thioacetamide. The as-prepared MTA/CS was characterized using X-ray diffraction, EDX, SEM, FTIR, and BET surface analysis. According to the findings, the MTA/CS was effectively synthesized. The removal behaviors of Hg2+ onto MTA/CS composite were inspected, which suggested that the MTA/CS composite exhibited great sorption properties for Hg2+ in liquid solutions. The maximal Hg2+ sorption capacity was 195 mg/g. The effects of temperature, Hg2+ concentration, contacting time, and MTA/CS concentration on sorption were analyzed. The 2nd-order model and Langmuir isotherm were suitable for the physicochemical adsorption processes. Thermodynamic analysis showed that the Hg2+ adsorption process onto the MTA/CS composite is exothermic and occurred spontaneously. The desorption condition of Hg2+ from its loaded MTA/CS was also gained. Likewise, the MTA/CS sorbent was undoubtedly regenerated by 0.8 M NaNO3 80 min contacting and 1:50 S:L ratio. The versatility and durability of MTA/CS sorbent were investigated via nine sorption-extraction cycles. The optimum parameters were applied to wastewater. Based on the result, the as-prepared MTA/CS might be a potential sorbent for removing Hg2+ from liquid solutions.

Efficient and selective removal of mercury ions from aqueous solution by 2,5-dimercaptothiadiazole covalently grafted chitosan derivative

The increasingly serious problem of mercury pollution has caused wide concern, and exploring the adsorbent materials with high adsorption capacity is a simple and effective approach to address this concern. In this study, chitosan (CS), 2,5-dimercaptothiadiazole (DMTD) and formaldehyde solution are used as raw materials to prepare the modified CS material (DMTD-CS) by one-pot method. Adequate characterizations suggest that DMTD-CS is highly cross-linked, and the specific surface area and pore volume are 126.91 m2/g and 0.6702 cm3/g, respectively. By investigating the Hg(II) adsorption properties of DMTD-CS, the maximum adsorption capacity at 318 K reaches 628.09 mg/g, this value is higher than that of CS and most of the reported CS derivatives. Adsorption kinetics and isotherms indicate that the adsorption behaviors of DMTD-CS conform to the pseudo-second-order kinetic model and Langmuir isotherm model, and in the coexistence of various metal ions, DMTD-CS shows very good selectivity for Hg(II). Additionally, the removal of DMTD-CS to Hg(II) is still at 80.06 % after six adsorption-desorption cycles, demonstrating outstanding recyclability. The further FT-IR and XPS analysis suggest that the synergistic complexation of O, N and S atoms on DMTD-CS with Hg(II) is an important factor leading to the high adsorption capacity.

Synthesis of functional poly(amidoamine) dendrimer decorated apple residue cellulose for efficient removal of aqueous Hg(II)

Water pollution caused by Hg(II) exerts hazardous effect to the environment and public health. The design and fabrication of eco-friendly bioadsorbents for efficient removal of Hg(II) from aqueous solution is a promising strategy. Herein, a series of bioadsorbents were synthesized by the decoration of apple residue cellulose with different generation (G) Schiff base functionalized poly(amidoamine) (PAMAM) dendrimers (SA-G0/CE, SA-G1.0/CE and SA-G2.0/CE). The structures of SA-G0/CE, SA-G1.0/CE and SA-G2.0/CE were characterized and their adsorption performances were determined comprehensively by considering various factors. The maximum adsorption capacity of SA-G0/CE, SA-G1.0/CE and SA-G2.0/CE for Hg(II) are 1.18, 1.73 and 1.88 mmol·g^-1, respectively. The as-prepared bioadsorbents exhibit competitive adsorption capacity as compared with other reported adsorbents. Moreover, they exhibit remarkable adsorption selectivity toward Hg(II) with the coexistence of Ni(II), Cd(II), Mn(II), or Pb(II). The bioadsorbents display satisfactory adsorption performance in real water sample and can be reused with good regeneration property. Adsorption mechanism reveals that the functional groups of OH, -CONH-, CN and NC take part in the adsorption for Hg(II). The work not only opens a pathway to realize the reuse of apple residue, but also provides a promising strategy to construct efficient bioadsorbents for the decontamination of Hg(II) from aqueous solution.

New thiadiazole modified chitosan derivative to control the growth of human pathogenic microbes and cancer cell lines

The emergence of multidrug-resistant microbes and the propagation of cancer cells are global health issues. The unique properties of chitosan and its derivatives make it an important candidate for therapeutic applications. Herein, a new thiadiazole derivative, 4-((5-(butylthio)-1,3,4-thiadiazol-2-yl) amino)-4-oxo butanoic acid (BuTD-COOH) was synthesized and used to modify the chitosan through amide linkages, forming a new thiadiazole chitosan derivative (BuTD-CH). The formation of thiadiazole and the chitosan derivative was confirmed by FT-IR, ¹H/¹³C-NMR, GC-MS, TGA, Elemental analysis, and XPS. The BuTD-CH showed a high antimicrobial effect against human pathogens Escherichia coli, Pseudomonas aeruginosa, Bacillus subtilis, Staphylococcus aureus, and Candida albicans with low MIC values of 25-50 μg ml^-1 compared to unmodified chitosan. The in-vitro cytotoxicity of BuTD-CH was evaluated against two cancer cell lines (MCF-7 and HepG2) and one normal cell (HFB4) using the MTT method. The newly synthesized derivatives showed high efficacy against cancerous cells and targeted them at low concentrations (IC₅₀ was 178.9 ± 9.1 and 147.8 ± 10.5 μg ml^-1 for MCF-7 and HepG2, respectively) compared with normal HFB4 cells (IC₅₀ was 335.7 ± 11.4 μg ml^-1). Thus, low concentrations of newly synthesized BuTD-CH could be safely used as an antimicrobial and pharmacological agent for inhibiting the growth of human pathogenic microbes and hepatocellular and adenocarcinoma therapy.

Polysaccharide-based biopolymer hydrogels for heavy metal detection and adsorption

BACKGROUND

With rapid development in agriculture and industry, water polluted with heavy metallic ions has come to be a serious problem. Adsorption-based methods are simple, efficient, and broadly used to eliminate heavy metals. Conventional adsorption materials have the problems of secondary environmental contamination. Hydrogels are considered effective adsorbents, and those prepared from biopolymers are biocompatible, biodegradable, non-toxic, safe to handle, and increasingly used to adsorb heavy metal ions.

AIM OF REVIEW

The natural origin and easy degradability of biopolymer hydrogels make them potential for development in environmental remediation. Its water absorption capacity enables it to efficiently adsorb various pollutants in the aqueous environment, and its internal pore channels increase the specific surface area for adsorption, which can provide abundant active binding sites for heavy metal ions through chemical modification.

KEY SCIENTIFIC CONCEPT OF REVIEW

As the most representative of biopolymer hydrogels, polysaccharide-based hydrogels are diverse, physically and chemically stable, and can undergo complex chemical modifications to enhance their performance, thus exhibiting superior ability to remove contaminants. This review summarizes the preparation methods of hydrogels, followed by a discussion of the main categories and applications of polysaccharide-based biopolymer hydrogels.

Prospects of titanium carbide-based MXene in heavy metal ion and radionuclide adsorption for wastewater remediation: A review

Contamination of water sources with various organic and inorganic non-biodegradable pollutants is becoming a growing concern due to industrialization, urbanization, and the inefficiency of traditional wastewater treatment processes. Transition Metal Carbides/Nitrides (MXenes) are emerging as advanced nanomaterials of choice for treating contaminated water owing to their excellent conductivity, mechanical flexibility, high specific surface area, scalable production, rich surface functionalities, and layered morphology. MXenes have demonstrated enhanced ability to adsorb various organic and inorganic contaminants depending upon their surface terminal groups (-OH, -F, and -O) and interlayer spacing. Titanium carbide (Ti₃C₂T_x) is most researched to date due to its ease of processing and stability. Ti₃C₂T_x has shown excellent performance in absorbing heavy metal ions and radioactive heavy metals. This review summarizes state-of-the-art Ti₃C₂T_x synthesis, including selective etching techniques, optimization of the desired adsorption features (controlling surface functional groups, intercalation, sonication, and functionalization), and regeneration and adsorption mechanism to remove contaminants. Furthermore, the review also compares the adsorption performance of Ti₃C₂T_x with other commercial adsorbents (including chitosan, cellulose, biomass, and zeolites). Ti₃C₂T_x has been found to have an adsorption efficiency of more than 90% in most studies due to its layered structure, which makes the functional groups easily accessible, unique and novel compared to other conventional nanomaterials and adsorbents. The challenges, potential solutions, and prospects associated with the commercial development of Ti₃C₂T_x as adsorbents are also discussed. The review establishes a framework for future wastewater treatment research using MXenes to address the global problem of water scarcity.

Functionalized polymethyl methacrylate-modified dialdehyde guar gum containing hydrazide groups for effective removal and enrichment of dyes, ion, and oil/water separation

In the study, a novel polymethacryloyl hydrazone modified guar gum adsorption material (GSA) was prepared via condensation between polyhydrazide and dialdehyde guar gum. GSA exhibited an abundant porous structure, higher selectivity for cationic pollutants in high-concentration wastewater like methylene blue (MB), malachite green (MG) dyes, and Cu²⁺. Under optimized experimental conditions, the maximum equilibrium adsorption capacity of MB, MG, and Cu²⁺ were 1418.36 mg/g, 1375.58 mg/g, and 196 mg/g, respectively. Adsorption isotherms and kinetics were well fitted with the Langmuir isotherm model and pseudo-second-order kinetic model. The thermodynamic analysis demonstrated that the adsorption process was endothermic, feasible, and spontaneous. Correspondently, the adsorption mechanism was explored by FTIR, SEM-EDS and XPS. The adsorbent was employed in disposing of local sewage water. Additionally, GSA successfully achieves efficient water/oil separation in different salt concentrations with a separation efficiency exceeding 99%.

Chitosan/benzyloxy-benzaldehyde modified ZnO nano template having optimized and distinct antiviral potency to human cytomegalovirus

Utilization of biomolecules encapsulated nano particles is currently originating ample attention to generate unconventional nanomedicines in antiviral research. Zinc oxide nanoparticle has been extensively studied for antimicrobial, antifungal and antifouling properties due to high surface to volume ratios and distinctive chemical as well as physical properties. Nevertheless, still minute information is available on their response on viruses. Here, in situ nanostructured and polysaccharide encapsulated ZnO NPs are fabricated with having antiviral potency and low cytotoxicity (%viability ~ 90%) by simply controlling the formation within interspatial 3D networks of hydrogels through perfect locking mechanism. The two composites ChH@ZnO and ChB@ZnO shows exceedingly effective antiviral activity toward Human cytomegalovirus (HCMV) having cell viability 93.6% and 92.4% up to 400 μg mL^-1 concentration. This study brings significant insights regarding the role of ZnO NPs surface coatings on their nanotoxicity and antiviral action and could potentially guide to the development of better antiviral drug.

An Overview of Modified Chitosan Adsorbents for the Removal of Precious Metals Species from Aqueous Media

This mini-review provides coverage of chitosan-based adsorbents and their modified forms as sustainable solid-phase extraction (SPE) materials for precious metal ions, such as gold species, and their complexes in aqueous media. Modified forms of chitosan-based adsorbents range from surface-functionalized systems to biomaterial composites that contain inorganic or other nanomaterial components. An overview of the SPE conditions such as pH, temperature, contact time, and adsorbent dosage was carried out to outline how these factors affect the efficiency of the sorption process, with an emphasis on gold species. This review provides insight into the structure-property relationships for chitinaceous adsorbents and their metal-ion removal mechanism in aqueous media. Cross-linked chitosan sorbents showed a maximum for Au(III) uptake capacity (600 mg/g), while S-containing cross-linked chitosan display favourable selectivity and uptake capacity with Au(III) species. Compared to industrial adsorbents such as activated carbon, modified chitosan sorbents display favourable uptake of Au(III) species, especially in aqueous media at low pH. In turn, this contribution is intended to catalyze further research directed at the rational design of tailored SPE materials that employ biopolymer scaffolds to yield improved uptake properties of precious metal species in aqueous systems. The controlled removal of gold and precious metal species from aqueous media is highly relevant to sustainable industrial processes and environmental remediation.