Preparation of nanofibrillated cellulose from grapefruit peel and its application as fat substitute in ice cream

Recent trends in design of healthier fat replacers: Type, replacement mechanism, sensory evaluation method and consumer acceptance

In recent years, with the increasing awareness of consumers about the relationship between excessive fat intake and chronic diseases, such as obesity, heart disease, diabetes, etc., the demand for low-fat foods has increased year by year. However, a simple reduction of fat content in food will cause changes in physical and chemical properties, physiological properties, and sensory properties of food. Therefore, developing high-quality fat replacers to replace natural fats has become an emerging trend, and it is still a technical challenge to completely simulate the special function of natural fat in low-fat foods. This review aims to provide an overview of development trends of fat replacers, and the different types of fat replacers, the potential fat replacement mechanisms, sensory evaluation methods, and their consumer acceptance are discussed and compared, which may provide a theoretical guidance to produce fat replacers and develop more healthy low-fat products favored by consumers.

Palm-based nanofibrillated cellulose (NFC) in carotenoid encapsulation and its incorporation into margarine-like reduced fat spread as fat replacer

Nanofibrillated cellulose (NFC) from plant biomass is becoming popular, attributed to the protective encapsulation of bioactive compounds in Pickering emulsion, preventing degradation and stabilizing the emulsion. NFC, as a natural dietary fiber, is a prominent fat replacer, providing a quality enhancement to reduced-fat products. In this study, NFC Pickering emulsions were prepared at NFC concentrations of 0.2%, 0.4%, 0.6%, 0.8%, and 1% to encapsulate carotenoids. The NFC Pickering emulsions at NFC concentrations of 0.4%, 0.6%, 0.8%, and 1% were incorporated into margarine-like reduced fat (3%) spreads as the aqueous phase. Characterization of both NFC Pickering emulsion and the incorporated NFC Pickering emulsion, margarine-like reduced fat spreads, was conducted with mastersizer, rheometer, spectrophotometer, and texture analyzer. The particle size (73.67 ± 0.35 to 94.73 ± 2.21 nm), viscosity (138.36 ± 3.35 to 10545.00 ± 567.10 mPa s), and creaming stability (25% to 100% stable) of the NFC Pickering emulsions were increased significantly when increasing the NFC concentration, whereas the encapsulation efficiency was highest at NFC 0.4% and 0.6%. Although imitating the viscoelastic solid-like behavior of margarine was difficult, the NFC Pickering emulsion properties were still able to enhance hardness, slip melting point, and color of the reduced fat spreads compared to the full-fat margarine, especially at 0.6% of NFC. Overall, extensive performances of NFC can be seen in encapsulating carotenoids, especially at NFC concentrations of 0.4% and 0.6%, with the enhancement of Pickering emulsion stability while portraying futuristic possibilities as a fat replacer in margarine optimally at 0.6% of NFC concentration. PRACTICAL APPLICATION: Nanocellulose extracted from palm dried long fiber was utilized to encapsulate carotenoids and replace fats in margarine-like reduced fat (3%) spreads. Our study portrayed high encapsulation efficiency and successful fat replacement with promising stability performances. Hence, nanocellulose displayed extensive potential as encapsulating agents and fat replacers while providing quality and sustainability enhancements in reduced-fat food.

Passion fruit by-products (Passiflora edulis f. flavicarpa) as a potential fat replacer in ice cream

In recent years, people have become interested in consuming low-fat foods as this reduces the risk of obesity and cardiovascular disease. For this reason, this study optimized the incorporation of passion fruit epicarp (PFE) as a partial fat substitute in dairy ice cream. For this purpose, a central composite rotational design 22 was performed and 5 response variables were optimized, of which 4 variables were maximized (percentage overrun, hardness, adhesiveness, and color coordinates L*, a*, b*), while the melting rate was minimized as a function of two factors (% PFE and % fat). The stability of three types of ice cream was then evaluated: experimental ice cream (3% milk fat and 0.97% PFE), commercial ice cream (4% milk fat and 2% vegetable fat) and control ice cream (3% milk fat without PFE added), according to their physicochemical and sensory properties during 57 days of storage (-22 °C, 85% relative humidity). The results showed that it was possible to reduce the milk fat by up to 25% by adding PFE (0.97%), which significantly reduced the melting rate and resulted in higher hardness (N), adhesiveness and increased yellowness compared to the commercial samples. The optical microscopy analysis also showed that PFE keeps the air bubbles immobile due to the increased viscosity in the serum phase during the 57-day storage.

Exploring the potential of bacterial cellulose paste as a fat replacer for low-fat plant-based hamburger patties

Plant-based hamburger patties (PHPs) with reduced fat content made using fat replacers will meet the consumption goals of individuals who consume meat alternative products for health. In this study, we developed a dual-alternative food model by analysing the applicability of bacterial cellulose paste (BCP) as a fat replacer and supplementing it in PHPs. BCPs were prepared with solid contents of (w/w; 1.0%, 1.5%, 2.0%, 2.5%, and 3.0%) and compared and analyzed with three types of conventional vegetable [coconut oil, margarine, and shortening (SH)] and animal fats (beef tallow, butter, and lard) for various characteristics (appearance, dimensional stability, hardness level, and rheological properties). According to the results, BCP with a solid content of 3.0% (w/w) had the most similar characteristics to SH. Therefore, using SH as a control fat, PHPs in which 0%, 25%, 50%, 75%, and 100% (w/w) SH were replaced by 3.0% (w/w) BCP were prepared. Analysis of the appearance, instrumental color, diameter reduction, thickness, cooking loss, and texture profile of the PHPs, confirmed that replacement of 25%-50% (w/w) SH with 3.0% (w/w) BCP in the preparation of PHP resulted in i) redder color, ii) better dimensional stability, iii) lower cooking loss, and iv) higher chewiness of the final products. The results of the sensory evaluation showed that the PHPs, with 25%-50% (w/w) SH replaced with 3.0% (w/w) BCP, exhibited no significant differences (p < 0.05) in overall preference scores compared to the full-SH sample. In conclusion, this study demonstrated the potential of BCP as a fat substitute for the production of PHPs.

The colloid and interface strategies to inhibit lipid digestion for designing low-calorie food

Although fat is one of the indispensable components of food flavor, excessive fat consumption could cause obesity, metabolism syndromes and an imbalance in the intestinal flora. In the pursuit of a healthy diet, designing fat reducing foods by inhibiting lipid digestion and calorie intake is a promising strategy. Altering the gastric emptying rates of lipids as well as acting on the lipase by suppressing the enzymatic activity or limiting lipase diffusion via interfacial modulation can effectively decrease lipolysis rates. In this review, we provide a comprehensive overview of colloid-based strategies that can be employed to retard lipid hydrolysis, including pancreatic lipase inhibitors, emulsion-based interfacial modulation and fat substitutes. Plants-/microorganisms-derived lipase inhibitors bind to catalytic active sites and change the enzymatic conformation to inhibit lipase activity. Introducing oil-in-water Pickering emulsions into the food can effectively delay lipolysis via steric hindrance of interfacial particulates. Regulating stability and physical states of emulsions can also affect the rate of hydrolysis by altering the active hydrolysis surface. 3D network structure assembled by fat substitutes with high viscosity can not only slow down the peristole and obstruct the diffusion of lipase to the oil droplets but also impede the transportation of lipolysis products to epithelial cells for adsorption. Their applications in low-calorie bakery, dairy and meat products were also discussed, emphasizing fat intake reduction, structure and flavor retention and potential health benefits. However, further application of these strategies in large-scale food production still requires more optimization on cost and lipid reducing effects. This review provides a comprehensive review on colloidal approaches, design, principles and applications of fat reducing strategies to meet the growing demand for healthier diet and offer practical insights for the low-calorie food industry.

Modulating the glycemic response of starch-based foods using organic nanomaterials: strategies and opportunities

Traditionally, diverse natural bioactive compounds (polyphenols, proteins, fatty acids, dietary fibers) are used as inhibitors of starch digestive enzymes for lowering glycemic index (GI) and preventing type 2 diabetes mellitus (T2DM). In recent years, organic nanomaterials (ONMs) have drawn a great attention because of their ability to overcome the stability and solubility issues of bioactive. This review aimed to elucidate the implications of ONMs in lowering GI and as encapsulating agents of enzymes inhibitors. The major ONMs are presented. The mechanisms underlying the inhibition of enzymes, the stability within the gastrointestinal tract (GIT) and safety of ONMs are also provided. As a result of encapsulation of bioactive in ONMs, a more pronounced inhibition of enzymes was observed compared to un-encapsulated bioactive. More importantly, the lower the size of ONMs, the higher their inhibitory effects due to facile binding with enzymes. Additionally, in vivo studies exhibited the potentiality of ONMs for protection and sustained release of insulin for GI management. Overall, regulating the GI using ONMs could be a safe, robust and viable alternative compared to synthetic drugs (acarbose and voglibose) and un-encapsulated bioactive. Future researches should prioritize ONMs in real food products and evaluate their safety on a case-by-case basis.

The lipid digestion behavior of oil-in-water emulsions stabilized by different particle-sized insoluble dietary fiber from citrus peel

In this study, oil-in-water emulsions stabilized by insoluble dietary fibre from citrus peel (CIDF) exhibited an obviously delayed lipid digestion property through gastrointestinal tract (GIT) model. Our results suggested that the rate and extent of lipid digestion greatly relied on particle sizes and concentrations of CIDF, and the inhibition effect of lipolysis was markedly enhanced with decreasing particle sizes and increasing CIDF levels. Furthermore, compared with Tween80-stabilized emulsion, the maximum inhibition extent of lipolysis was 38.77% for CIDF400-stabilized one at 0.4 wt% concentration. Effects of CIDFs on lipid digestion was mainly due to the formation of protective layers around oil droplets, further blocking the entry of lipase to the internal lipids, and/or attributed to the increasing viscosity of emulsions caused by CIDFs, finally limiting the transportation of some substances in the simulated small intestine digestion. Our research would provide useful references for the application of CIDF-stabilized emulsions in low-calorie food.

Preparation of cellulose nanofibers from potato residues by ultrasonication combined with high-pressure homogenization

In this study, the preparation parameters of cellulose nanofibers from potato residues (PCNFs) by ultrasonication combined with high-pressure homogenization were optimized based on yield, zeta-potential and morphology. The optimal parameters were as follows: ultrasonic power of 125 W for 15 min and homogenization pressure of 40 MPa four times. The yield, zeta potential and diameter range of the obtained PCNFs were 19.81 %, -15.60 mV and 20-60 nm, respectively. Fourier transform infrared spectroscopy, X-ray diffraction and nuclear magnetic resonance spectroscopy results showed that part of the crystalline region of cellulose was destroyed, resulting in a decrease in crystallinity index from 53.01 % to 35.44 %. The maximum thermal degradation temperature increased from 283 °C to 337 °C. PCNFs suspensions were non-Newtonian fluids and exhibited rigid colloidal particle properties. In conclusion, this study provided alternative uses for potato residues generated from starch processing and showed great potential for various industrial applications of PCNFs.

Effect of particle size on composition, physicochemical, functional, and structural properties of insoluble dietary fiber concentrate from citrus peel

To investigate the composition, physicochemical, functional, and structural properties of citrus insoluble dietary fiber concentrate from citrus peel affected by different particle sizes, citrus insoluble dietary fiber concentrate was modified by coarse crush and superfine grinding treatments. The results showed that the contents of hemicellulose and lignin significantly decrease and a significant increase in cellulose and insoluble dietary fiber contents with the reduction in particle size. In addition, the markedly decreased particle size and obviously microstructural changes of citrus insoluble dietary fiber concentrate powder were observed. The color value of citrus insoluble dietary fiber concentrate was observably improved, crystallinity and thermal stability of modified fiber slightly increase with the decrease in particle size, which is due to the partial elimination of hemicellulose and lignin after the treatments. However, water holding capacity, water swelling capacity, and oil holding capacity were found to be lower with the reduction in particle size, which might be attributed to the fact that superfine grinding treatment destroyed the structure integrity, thus causing some soluble components to break away from the cellulose backbone, or due to aggregation of smaller granules. The present study suggested that decreasing the particle size could effectively change some properties of citrus insoluble dietary fiber concentrate, which will provide new perspectives for the application of citrus insoluble dietary fiber concentrate in food products.

Nanocellulose: An amazing nanomaterial with diverse applications in food science

Recently, nanocellulose has gained growing interests in food science due to its many advantages including its broad resource of raw materials, renewability, interface stability, high surface area, mechanical strength, prebiotic characteristics, surface chemistry versatility and easy modification. Since then, this review summarized the sources, morphology, and structure characteristics of nanocellulose. Meanwhile, the mechanical, chemical, and combined treatment methods for the preparation of nanocellulose with desired properties were elaborated. Furthermore, the application of nanocellulose in Pickering emulsions, reinforced food packaging, functional food ingredient, food-grade hydrogels, and biosensors were emphasized. Finally, the safety, challenges, and future perspectives of nanocellulose were discussed. This work provided key developments and effective benefits of nanocellulose for future research opportunities in food.

Production of salad dressings via the use of economically prepared cellulose nanofiber from lime residue as a functional ingredient

Production of cellulose nanofiber (CNF) via the use of a more economical and less energy-intensive means is desirable. Once formed, it is necessary to determine whether or not the prepared CNF would be capable of forming a Pickering emulsion as in the case of traditionally prepared nanofiber. In the present study, oil-in-water emulsions, namely, salad dressings, with CNF as a functional ingredient, were prepared. Lime residue powder as the source of dietary fiber was subject to high-shear homogenization to form CNF suspension, which was then mixed with other ingredients. Different contents of fat (20%-40%), egg yolk (0%-4%), and lime residue powder (0%-4%) were tested. The formed CNF successfully acted as a Pickering emulsifier and allowed the production of salad dressings with desirable characteristics at 30%-40% fat, 2% egg yolk, and 2% lime residue powder. The dressings exhibited adequate physicochemical properties and remained stable throughout the storage period of 28 days. PRACTICAL APPLICATION: The presently proposed means would allow the industry to produce cellulose nanofiber (CNF) in a more economical and less energy-intensive manner. The so-produced CNF exhibits comparable properties as traditionally prepared nanofiber and can be used as a stabilizer in food emulsions.

Superior separation of hemicellulose-derived sugars from eucalyptus with tropic acid pretreatment

Organic acid pretreatments can efficiently separate biomass-based hemicellulose and selectively produce hemicellulose-derived sugars. In this study, hemicellulose is separation as xylose, oligosaccharides in the tropic acid-catalyzed hydrothermal pretreatment of eucalyptus. The maximum yield of hemicellulose-derived sugars (85.78 %) with 71.25 % xylose selectivity (based on the total xylose in raw material) was achieved in the hydrolysate under optimal conditions (5 % TA, 160 ℃, 80 min). The yield of hemicellulose-derived sugar and the separation yield of hemicellulose increased by 11.06 % and 11.45 % compared with glycolic acid pretreatment in the similar severity factor. The separation yield of cellulose and lignin was decreased by 4.23 % and 0.98 %, respectively. This resulted in residual solids with higher biological stability (higher fiber crystallinity index, higher thermal stability, and higher lignin content). Therefore, higher hemicellulose separation selectivity and rich hemicellulose-derived sugars were obtained using TA pretreatment. The work would bring up a new method for biomass refining.

Fruit waste-derived cellulose and graphene-based aerogels: Plausible adsorption pathways for fast and efficient removal of organic dyes

A wide range of organic pollutants in industrial effluents, agricultural runoff, and domestic discharges are exacerbating water scarcity, leading to water-borne ailments, and adversely affecting the marine ecosystem and biodiversity. The efficient, sustainable, and cost-effective materials need to be addressed urgently for the removal of organic pollutants. Herein, ultra-light (0.018 g.cm^-3) and highly porous (96.4%) composite aerogel is prepared by gelatinization of graphene oxide with fruit waste-derived cellulose. The macroscopic porosity generated by interconnecting cellulosic skeleton and graphene oxide sheets via hydrogen bonding network provided ample avenues for transport and diffusion of organic dyes-enriched wastewater throughout the cellulose-graphene oxide composite aerogel (CGA). Consequently, organic dyes are efficiently adsorbed by easily accessible surface sites distributed throughout the CGA. The size, charge, and chemical structure of organic dyes along with textural features and accessible surface active sites of CGA governed the adsorption process. The spectroscopic analyses based on FTIR, Raman, and XPS measurements suggest electrostatic, n-π, π-π, cation-π interactions, dipole-dipole hydrogen, and Yoshida hydrogen linkages as major interactive pathways for the adsorption of organic dyes by the CGA. Moreover, the composite aerogel furnished an excellent recyclability for the adsorptive removal of organic pollutants from wastewater. The present work promises the potential of 2D nanostructured layered materials and fruit-waste-derived composite aerogels for sustainable utilization in wastewater treatment, which can be an excellent step towards water security.

Plant-Based Milks: Alternatives to the Manufacture and Characterization of Ice Cream

This study investigated the potential use of dietary fibers (psyllium and pectin fibers added in different proportions of 0–10%) to improve the rheological, textural, and sensory characteristics of vegetable ice cream using vegetable milk (almond and hemp milk). Hemp milk was obtained from the peeled seeds of the industrial hemp plant, which includes varieties of Cannabis sativa, which have a low content of the psychotropic substance tetrahydrocannabinol (THC) and are grown for food. The rheological characteristics of the mix and ice cream were determined by using the Haake Mars rheometer. Compared with the control sample, the viscosities of the mix in all samples analyzed were enhanced with the addition of dietary fibers, due to the occurrence of interactions and stabilizations. The viscoelastic modules G′ G″ were determined on ice cream samples at a temperature of −10 °C. The elastic and viscous modulus showed high values with the increase of the addition of 6% dietary fibers. The textural characteristics were assessed by the shear strength of a layer of ice cream at a temperature of −4 °C. Hardness, firmness, and adhesiveness were influenced by the size of their ice crystals, the fat content, and the percentage of dietary fibers added. The sensory analysis of the ice cream showed higher overall scores for the almond milk ice cream, because the sweet taste was appreciated with a maximum score, while the hemp milk ice cream was evaluated for flavor and taste.

Applications of Microbial Exopolysaccharides in the Food Industry

Exopolysaccharides (EPSs) are high molecular weight polysaccharides secreted by microorganisms in the surrounding environment. In addition to the favorable benefits of these compounds for microorganisms, including microbial cell protection, they are used in various food, pharmaceutical, and cosmetic industries. Investigating the functional and health-promoting characteristics of microbial EPS, identifying the isolation method of these valuable compounds, and their applications in the food industry are the objectives of this study. EPS are used in food industries as thickeners, gelling agents, viscosifiers, and film formers. The antioxidative, anticancer, prebiotic, and cholesterol-lowering effects of some of these compounds make it possible to use them in functional food production.

Dietary Fiber and Prebiotic Compounds in Fruits and Vegetables Food Waste

The fruits and vegetables processing industry is one of the most relevant food by-products, displaying limited commercial exploitation entailing economic and environmental problems. However, these by-products present a considerable amount of dietary fiber and prebiotics with important biological activities, such as gut microbiota modulation, lowering the glycemic load and replacing some unhealthy ingredients with an impact on food texture. Therefore, the international scientific community has considered incorporating their extracts or powders to preserve or fortify food products an area of interest, mainly because nowadays consumers demand the production of safer and health-promoting foods. In the present review, literature, mainly from the last 5 years, is critically analyzed and presented. A particular focus is given to utilizing the extracted dietary fibers in different food products and their impact on their characteristics. Safety issues regarding fruits and vegetables wastes utilization and anti-nutritional compounds impact were also discussed.