Revealing the enhanced structural recovery and gelation mechanisms of cation-induced cellulose nanofibrils composite hydrogels

High-Value Utilization of Cellulose: Intriguing and Important Effects of Hydrogen Bonding Interactions─A Mini-Review

Cellulose has been widely used in papermaking, textile, and chemical industries due to its diverse sources, environmental friendliness, and renewability. Recently, much more attention has been paid to converting cellulose into high-value-added products. Therefore, the extraction of nanocellulose, the dissolution of cellulose, and their applications are some of the most important research topics currently. However, cellulose's dense hydrogen bond network poses challenges for efficient extraction and dissolution, limiting its potential for functional material development. This review discusses the mechanisms of hydrogen bond disruption and weak interactions during nanocellulose extraction and cellulose dissolution. Key challenges and future research directions are highlighted, emphasizing developing efficient, ecofriendly, and cost-effective methods. Additionally, this review provides theoretical insights for constructing high-performance cellulose-based materials.

High-strength, anti-fatigue, cellulose nanofiber reinforced polyvinyl alcohol based ionic conductive hydrogels for flexible strain/pressure sensors and triboelectric nanogenerators

Ionic conductive hydrogels (ICHs) have attracted great attention because of their excellent biocompatibility and structural similarity with biological tissues. However, it is still a huge challenge to prepare a high strength, conductivity and durability hydrogel-based flexible sensor with dual network structure through a simple and environmentally friendly method. In this work, a simple one-pot cycle freezing thawing method was proposed to prepare ICHs by dissolving polyvinyl alcohol (PVA) and ferric chloride (FeCl3) in cellulose nanofiber (CNF) aqueous dispersion. A dual cross-linked network was established in hydrogel through the hydrogen bonds and coordination bonds among PVA, CNF, and FeCl3. This structure endows the as-prepared hydrogel with high sensitivity (pressure sensitivity coefficient (S) = 5.326 in the pressure range of 0-5 kPa), wide response range (4511 kPa), excellent durability (over 3000 cycles), short response time (83 ms) and recovery time (117 ms), which can accurately detect various human activities in real time. Furthermore, the triboelectric nano-generator (TENG) made from PVA@CNF-FeCl3 hydrogel can not only supply power for commercial capacitors and LED lamps, but also be used as a self-powered sensor to detect human motion. This work provides a new approach for the development of the next generation of flexible wearable electronic devices.

Wearable sensor supports in-situ and continuous monitoring of plant health in precision agriculture era

Plant health is intricately linked to crop quality, food security and agricultural productivity. Obtaining accurate plant health information is of paramount importance in the realm of precision agriculture. Wearable sensors offer an exceptional avenue for investigating plant health status and fundamental plant science, as they enable real-time and continuous in-situ monitoring of physiological biomarkers. However, a comprehensive overview that integrates and critically assesses wearable plant sensors across various facets, including their fundamental elements, classification, design, sensing mechanism, fabrication, characterization and application, remains elusive. In this study, we provide a meticulous description and systematic synthesis of recent research progress in wearable sensor properties, technology and their application in monitoring plant health information. This work endeavours to serve as a guiding resource for the utilization of wearable plant sensors, empowering the advancement of plant health within the precision agriculture paradigm.

A High-Stretching, Rapid-Self-Healing, and Printable Composite Hydrogel Based on Poly(Vinyl Alcohol), Nanocellulose, and Sodium Alginate

Hydrogels with excellent flexibility, conductivity, and controllable mechanical properties are the current research hotspots in the field of biomaterial sensors. However, it is difficult for hydrogel sensors to regain their original function after being damaged, which limits their practical applications. Herein, a composite hydrogel (named SPBC) of poly(vinyl alcohol) (PVA)/sodium alginate (SA)/cellulose nanofibers (CNFs)/sodium borate tetrahydrate was synthesized, which has good self-healing, electrical conductivity, and excellent mechanical properties. The SPBC0.3 hydrogel demonstrates rapid self-healing (<30 s) and achieves mechanical properties of 33.92 kPa. Additionally, it exhibits high tensile strain performance (4000%). The abundant internal ions and functional groups of SPBC hydrogels provide support for the good electrical conductivity (0.62 S/cm) and electrical response properties. In addition, the SPBC hydrogel can be attached to surfaces such as fingers and wrists to monitor human movements in real time, and its good rheological property supports three-dimensional (3D) printing molding methods. In summary, this study successfully prepared a self-healing, conductive, printable, and mechanically superior SPBC hydrogel. Its suitability for 3D-printing personalized fabrication and outstanding sensor properties makes it a useful reference for hydrogels in wearable devices and human motion monitoring.

Biotechnological innovations in nanocellulose production from waste biomass with a focus on pineapple waste

New materials' synthesis and utilization have shown many critical challenges in healthcare and other industrial sectors as most of these materials are directly or indirectly developed from fossil fuel resources. Environmental regulations and sustainability concepts have promoted the use of natural compounds with unique structures and properties that can be biodegradable, biocompatible, and eco-friendly. In this context, nanocellulose (NC) utility in different sectors and industries is reported due to their unique properties including biocompatibility and antimicrobial characteristics. The bacterial nanocellulose (BNC)-based materials have been synthesized by bacterial cells and extracted from plant waste materials including pineapple plant waste biomass. These materials have been utilized in the form of nanofibers and nanocrystals. These materials are found to have excellent surface properties, low density, and good transparency, and are rich in hydroxyl groups for their modifications to other useful products. These materials are well utilized in different sectors including biomedical or health care centres, nanocomposite materials, supercapacitors, and polymer matrix production. This review explores different approaches for NC production from pineapple waste residues using biotechnological interventions, approaches for their modification, and wider applications in different sectors. Recent technological developments in NC production by enzymatic treatment are critically discussed. The utilization of pineapple waste-derived NC from a bioeconomic perspective is summarized in the paper. The chemical composition and properties of nanocellulose extracted from pineapple waste may have unique characteristics compared to other sources. Pineapple waste for nanocellulose production aligns with the principles of sustainability, waste reduction, and innovation, making it a promising and novel approach in the field of nanocellulose materials.

Mechanical Properties of Low-Molecular-Weight Peptide Hydrogels Improved by Thiol-Ene Click Chemistry

Low-molecular-weight peptide hydrogels can be formed by self-assembly through weak interactions, but the application of the hydrogel is influenced by its weak mechanical properties. Therefore, it is important to construct low-molecular-weight peptide hydrogels with excellent mechanical properties. In this work, we designed the pentapeptide molecule Fmoc-FFCKK-OH (abbreviated as FFCKK) with a sulfhydryl group, and another low-molecular-weight cross-linker N,N'-methylenebis(acrylamide) (MBA) was introduced to construct a hydrogel with excellent mechanical properties. The secondary structure change process of FFCKK and the assembly mechanism of hydrogel were analyzed using theoretical calculations and experimental characterizations. The occurrence of thiol-ene click chemistry provides covalent interaction in the hydrogel, and the synergistic effect ofcovalent interaction and hydrogen bonding improves the mechanical properties of the hydrogel by nearly 10-fold. The hydrogel was observed to be able to withstand a stress of 368 Pa and to break in a layer-by-layer manner by compression testing. The micromechanics of the hydrogels were characterized, and the excellent mechanical properties of the hydrogels were confirmed. The synergistic approach provides a new idea for the preparation of low-molecular-weight peptide hydrogels and facilitates the expansion of their potential applications in biomedical fields.

A Novel Multifunctional Crosslinking PVA/CMCS Hydrogel Containing Cyclic Peptide Actinomycin X2 and PA@Fe with Excellent Antibacterial and Commendable Mechanical Properties

Bacterial infected environments and resulting bacterial infections have been threatening the human health globally. Due to increased bacterial resistance caused by improper and excessive use of antibiotics, antibacterial biomaterials are being developed as alternatives to antibiotics in some cases. Herein, an advanced multifunctional hydrogel with excellent antibacterial properties, enhanced mechanical properties, biocompatibility and self-healing performance, was designed through freezing-thawing method. This hydrogel network is composed of polyvinyl alcohol (PVA), carboxymethyl chitosan (CMCS), protocatechualdehyde (PA), ferric iron (Fe) and an antimicrobial cyclic peptide actinomycin X2 (Ac.X2). The double dynamic bonds among protocatechualdehyde (PA), ferric iron (Fe) and carboxymethyl chitosan containing coordinate bond (catechol-Fe) as well as dynamic Schiff base bonds and hydrogen bonds endowed the hydrogel with enhanced mechanical properties. Successful formation of hydrogel was confirmed through ATR-IR and XRD, and structural evaluation through SEM analysis, whereas mechanical properties were tested with electromechanical universal testing machine. The resulting PVA/CMCS/Ac.X2/PA@Fe (PCXPA) hydrogel has favorable biocompatibility and excellent broad-spectrum antimicrobial activity against both S. aureus (95.3 %) and E. coli (90.2 %) compared with free-soluble Ac.X2, which exhibited subpar performance against E. coli reported in our previous studies. This work provides a new insight on preparing multifunctional hydrogels containing antimicrobial peptides as antibacterial material.

One-pot and one-step preparation of "living" cellulose nanofiber hydrogel with active double-bond via chemical vapor deposition

Due to the existence of water, it is still a challenge to conduct chemical modification on cellulose nanofiber (CNF) hydrogels with active double bonds. A simple one-pot and one-step method for constructing "living" CNF hydrogel with double bond was created at room temperature. The chemical vapor deposition (CVD) of methacryloyl chloride (MACl) was used to introduce physical-trapped, chemical-anchored and functional double bonds into TEMPO-oxidized cellulose nanofiber (TOCN) hydrogels. TOCN hydrogel could be fabricated within just 0.5 h, the minimum dosage of MACl could be reduced to 3.22 mg/g (MACl/TOCN hydrogel). Furthermore, the CVD methods showed high efficiency for mass production and recyclability. Moreover, the chemical "living" reactivity of the introduced double bonds were verified by the freezing and UV crosslinking, radical polymerization and thiol-ene click reaction. Compared with pure TOCN hydrogel, the obtained functionalized TOCN hydrogel exhibited remarkable improvements in mechanical properties, with enhancements of 12.34 times and 2.04 times, as well as an increase in hydrophobicity by 2.14 times and a fluorescence performance improvement of 2.93 times.

Biobased Nanomaterials─The Role of Interfacial Interactions for Advanced Materials

This review presents recent advances regarding biomass-based nanomaterials, focusing on their surface interactions. Plant biomass-based nanoparticles, like nanocellulose and lignin from industry side streams, hold great potential for the development of lightweight, functional, biodegradable, or recyclable material solutions for a sustainable circular bioeconomy. However, to obtain optimal properties of the nanoparticles and materials made thereof, it is crucial to control the interactions both during particle production and in applications. Herein we focus on the current understanding of these interactions. Solvent interactions during particle formation and production, as well as interactions with water, polymers, cells and other components in applications, are addressed. We concentrate on cellulose and lignin nanomaterials and their combination. We demonstrate how the surface chemistry of the nanomaterials affects these interactions and how excellent performance is only achieved when the interactions are controlled. We furthermore introduce suitable methods for probing interactions with nanomaterials, describe their advantages and challenges, and introduce some less commonly used methods and discuss their possible applications to gain a deeper understanding of the interfacial chemistry of biobased nanomaterials. Finally, some gaps in current understanding and interesting emerging research lines are identified.

High strength, anti-freezing and conductive silkworm excrement cellulose-based ionic hydrogel with physical-chemical double cross-linked for pressure sensing

Recently, ionic conductive hydrogels have attracted extensive attention in the field of flexible pressure sensors due to their mechanical flexibility and high conductivity. However, the trade-off between the high electrical and mechanical properties of ionic conductive hydrogels and the loss of mechanical and electrical properties of traditional high water content hydrogels at low temperature are still the main hurdles in this area. Herein, a rigid Ca-rich silkworm excrement cellulose (SECCa) extracted from silkworm breeding waste was prepared. SEC-Ca was combined with the flexible hydroxypropyl methylcellulose (HPMC) molecules through hydrogen bonding and double ionic bonds of Zn²⁺ and Ca²⁺ to obtain the physical network SEC@HPMC-(Zn²⁺/Ca²⁺). Then, the covalently cross-linked network of polyacrylamide (PAAM) and the physical network were cross-linked by hydrogen bonding to obtain the physical-chemical double cross-linked hydrogel (SEC@HPMC-(Zn²⁺/Ca²⁺)/PAAM). The hydrogel showed excellent compression properties (95 %, 4.08 MPa), high ionic conductivity (4.63 S/m at 25 °C) and excellent frost resistance (possessing ionic conductivity of 1.20 S/m at -70 °C). Notably, the hydrogel can monitor pressure changes in a wide temperature range (-60-25 °C) with high sensitivity, stability and durability. This newly fabricated hydrogel-based pressure sensors can be deemed of great prospects for large-scale application of pressure detection at ultra-low temperatures.

Dispersion Homogeneity of Silicon Anode Slurries with Various Binders for Li-Ion Battery Anode Coating

We aimed to determine the relationship between surface chemistry and the rheological properties of silicon anode slurries in lithium-ion batteries. To accomplish this, we investigated the use of various binders such as PAA, CMC/SBR, and chitosan as a means to control particle aggregation and improve the flowability and homogeneity of the slurry. Additionally, we utilized zeta potential analysis to examine the electrostatic stability of the silicon particles in the presence of different binders, and the results indicated that the conformations of the binders on the silicon particles can be influenced by both neutralization and the pH conditions. Furthermore, we found that the zeta potential values served as a useful metric for evaluating binder adsorption and particle dispersion in the solution. We also conducted three-interval thixotropic tests (3ITTs) to examine the structural deformation and recovery characteristics of the slurry, and the results demonstrated that these properties vary depending on the strain intervals, pH conditions, and chosen binder. Overall, this study emphasized the importance of taking into account surface chemistry, neutralization, and pH conditions when assessing the rheological properties of the slurry and coating quality for lithium-ion batteries.

Aggregation of konjac glucomannan by ethanol under low-alkali treatment

•

Microstructure of KGM alcogels is distinct from that of normal KGM gels.

•

Gel network of EAK_gel is more heterogeneous than that of EK_gel.

•

Ethanol arranges the aggregation of deacetylated KGM chains.

•

Both structure and function of KGM aggregates are altered by ethanol and alkali.

•

Solvent quality deterioration drives the formation of low-alkali KGM alcogels.

Utilizing ethanol in konjac glucomannan (KGM) gelation has important food processing applications. Typically, ethanol positively impacts the formation of low-alkali KGM gels and dramatically changes their physical properties, but the role of ethanol on the aggregation of KGM chains and the resultant gelation is less well understood. This study presents the distinct microstructures of low-alkali KGM gels incorporating ethanol. The fibril diameter and mesh size were determined to be 262.3 ± 22.3 nm and 2.680 ± 0.035 μm in average, contributing to a higher degree of anisotropy of such a gel network. Ethanol favors intermolecular aggregation by increasing the R_g of small-sized aggregates to 2.10 nm. The FTIR and temperature-cycled rheological studies suggest there are hydrophobic interactions stabilizing the gel network with the assistance of hydrogen bonds. The spatial confinement of deacetylated KGM chains as the solvent quality deteriorates by incorporating ethanol may arrange the aggregation and induce the structural reorganization in gel formation.

Temperature-Responsive Aldehyde Hydrogels with Injectable, Self-Healing, and Tunable Mechanical Properties

Injectable and self-healing hydrogels with exemplary biocompatibility and tunable mechanical properties are urgently needed due to their significant advantages for tissue engineering applications. Here, we report a new temperature-responsive aldehyde hydrogel with dual physical-cross-linked networks and injectable and self-healing properties prepared from an ABA-type triblock copolymer, poly{[FPMA(4-formylphenyl methacrylate)-co-DEGMA[di(ethylene glycol) methyl ether methacrylate]-b-MPC(2-methacryloyloxyethyl phosphorylcholine)-b-(FPMA-co-DEGMA)}. The thermoresponsive poly(DEGMA) segments drive the dehydration and hydrophobic interaction, enabling polymer chain winding as the first cross-linking network, when the temperature is raised above the critical gelation temperature. Meanwhile, the benzaldehyde groups offer physical interactions, including hydrogen bonding and hydrophobic and π-π stacking interactions as the second cross-linking network. When increasing the benzaldehyde content in the triblock copolymers from 0 to 8.2 mol %, the critical gelation temperature of the resulted hydrogels dropped from 35.5 to 19.9 °C and the mechanical modulus increased from 21 to 1411 Pa. Owing to the physical-cross-linked networks, the hydrogel demonstrated excellent injectability and self-healing properties. The cell viabilities tested from MTT assays toward both normal lung fibroblast cells (MRC-5) and cancerous cervical (HeLa) cells were found to be 100 and 101%, respectively, for varying polymer concentrations up to 1 mg/mL. The 3D cell encapsulation of the hydrogels was evaluated by a cytotoxicity Live/Dead assay, showing 92% cell viability. With these attractive physiochemical and biological properties, this temperature-responsive aldehyde hydrogel can be a promising candidate as a cell scaffold for tissue engineering.