Multifunctional and thermoresponsive methylcellulose composite hydrogels with photothermal effect

Temperature- and pH-induced dual-crosslinked methylcellulose/chitosan-gallol conjugate composite hydrogels with improved mechanical, tissue adhesive, and hemostatic properties

Gauze or bandages are commonly used to effectively control bleeding during trauma and surgery. However, conventional treatment methods can sometimes lead to secondary damages. In recent years, there has been increased interest in developing adhesive hemostatic hydrogels as a safer alternative for achieving hemostasis. Methylcellulose (MC) is a well-known thermo-sensitive polymer with excellent biocompatibility that is capable of forming a hydrogel through physical crosslinking owing to its inherent thermo-reversible properties. However, the poor mechanical properties of the MC hydrogel comprising a single crosslinked network (SN) limit its application as a hemostatic material. To address this issue, we incorporated a chitosan-gallol (CS-GA) conjugate, which has the ability to form chemical crosslinks through self-crosslinking reactions under specific pH conditions, into the MC hydrogel to reinforce the MC hydrogel network. The resulting MC/CS-GA hydrogel with a dual-crosslinked network (DN), involving both physical and chemical crosslinks, exhibited synergistic effects of the two types of crosslinks. Thus, compared with those of the SN hydrogel, the composite DN hydrogel exhibited significantly enhanced mechanical strength and tissue adhesive properties. Moreover, the DN hydrogel presented excellent biological activity in vitro. Additionally, in rat hepatic hemorrhage models, the DN hydrogel exhibited high hemostatic efficiency, showcasing its multifunctional capabilities.

Multifunctional and edible egg white/amylose-tannin bilayer film for perishable fruit preservation

The substantial waste of perishable foods during transportation significantly contributes to greenhouse gas emissions, intensifying the climate crisis. To mitigate the rapid spoilage of fruits, an eco-friendly bilayer film was developed using natural egg white (EW), amylose (Am), and tannic acid (TA). The EW/Am-TA bilayer film features a primary layer of amphiphilic EW, ensuring a uniform coating on hydrophobic fruit surfaces, and a secondary layer composed of Am and TA, imparting notable tensile strength (5.3 ± 0.5 MPa) and elongation at break (28.5 ± 4.1 %). This bilayer film effectively shields fruits from UV-B and UV-C radiation (~0 % transmittance at 280 and 330 nm) and exhibits antioxidant and antibacterial properties due to the presence of TA. Fruits such as bananas, avocados, and cherry tomatoes, when dip-coated with the optimized EW/Am-TA bilayer, maintained their freshness, color, weight, and texture for up to seven days, demonstrating the effectiveness of this bilayer coating in food preservation. The natural materials in the coated film are edible and can be safely removed with tap water at room temperature in <10 s, posing no food safety risks. Thus, the proposed bilayer coating presents a significant solution to the global problem of food waste.

Thermal control of photothermal implants inspired by polar bear skin for the treatment of infected bone defects

Photothermal therapy (PTT) encounters challenges in addressing deep tissue infections, characterized by limited penetration or potential hyperthermal damage to surrounding tissues, initiating undesirable inflammatory cascades. Inspired by polar bear thermal regulation, we present a "bio-based endogenic thermal-adaptive booster" implant coating. This coating integrates a photothermal poly(tannic acid) (pTA) layer, mimicking the "polar bear dark skin", securely linked with anti-inflammatory dexamethasone (Dex), resembling the "secretion", and a red blood cell membrane (RBCM) layer, forming the insulating "transparent fur". The RBCM "fur" demonstrates unexpectedly superior local heat storage, amplifying the photothermal effect of the pTA "skin" by 1.30 times and boosting localized photothermal antibacterial efficiency by 1.30-fold (approximately 99%) compared to those without RBCM. Furthermore, RBCM sustains Dex release and offers additional protection against thermal inflammation, releasing Dex 1.90 times more under NIR irradiation than under non-photothermal conditions. In a rat infectious bone model, the photothermal-boosting implant coating provides a favorable biological interface and achieves a 99.97% photothermal antibacterial ratio, enhancing osseointegration without evident tissue harm, evidenced by a 2.47-fold increase in bone volume fraction and a 2.24-fold reduction in pro-inflammatory cytokines compared to those lacking a RBCM. Insights derived from cell membrane-based thermal-adaptive coatings herald a paradigm shift in efficient and safe PTT.

The regulation of CuSNPs' interface for further enhancing mechanical and photothermal conversion properties of chitosan/@CuSNPs hybrid fibers

Our previous study has demonstrated that the microstructure of copper sulfide nanoparticles (CuSNPs) can be controlled to enhance mechanical and photothermal conversion properties of chitosan (CS)/CuSNPs hybrid fibers. However, achieving optimal dispersion and compatibility of CuSNPs within a CS matrix remains a challenge, this study aims to improve dispersion and compatibility by modifying the CuSNPs' interface, thereby enhancing mechanical and photothermal conversion properties of hybrid fibers. The interfaces of @CuSNPs (CuS@Xylan NPs, CuS@SA NPs, and CuS@PEG NPs) contain hydroxyl groups, facilitating the hydrogen bonds formation with the CS matrix. The dispersibility is further enhanced by the synergistic effect of xylan and SA's anionic charges with cationic chitosan. Notably, the viscosity of the CS/@CuSNPs hybrid spinning solution is significantly enhanced, resulting in improved breaking strength for initial hybrid fibers. Specifically, the breaking strength of CS/CuS@Xylan NPs hybrid fibers reaches 1.4 cN/dtex, exhibiting a 42.86 % and 20.6 % increase over CS and CS/CuSNPs hybrid fibers. Simultaneously, the CS/CuS@Xylan NPs hybrid fibers exhibit exceptional photothermal conversion performance, surpassing that of CS fibers by 5.2 times and CS/CuSNPs hybrid fibers by 1.4 times. The regulation of interface modification is an efficient approach to enhance the tensile strength and photothermal conversion properties of CS/CuSNPs hybrid fibers.

Engineered Microbial Nanohybrids for Tumor-Mediated NIR II Photothermal Enhanced Ferroptosis/Cuproptosis and Immunotherapy

The colon tumor microenvironment has a high concentration of H2 S and glutathione, which is highly immunosuppressive and adverse to multiple therapeutic methodologies such as ferroptosis. Here, an engineered microbial nanohybrid based on Escherichia coli (E. coli) and Cu2 O nanoparticles to specific colon tumor therapy and immunosuppression reversion is reported. The as-prepared E. coli@Cu2 O hybrid can accumulate in tumor sites upon intravenous injection, and Cu2 O nanoparticles convert to Cux S by consuming the endogenous H2 S, which exhibits strong photothermal conversion at near-infrared II (NIR II) biological window. Furthermore, E. coli@Cu2 O is able to induce cellular ferroptosis and cuproptosis through inactivation of glutathione peroxidase 4 and aggregation of dihydrolipoamide S-acetyltransferase, respectively. Photothermal-enhanced ferroptosis/cuproptosis achieved by E. coli@Cu2 O reverses the immunosuppression of colon tumors by triggering dendritic cell maturation (about 30%) and T cell activation (about 50% CD8+ T cells). Concerted with immune checkpoint blockade, the engineered microbial nanohybrid can inhibit the growth of abscopal tumors upon NIR illumination. Overall, the designed microbial nanohybrid can achieve tumor-specific photothermal-enhanced ferroptosis/cuproptosis and immunosuppression reversion, showing promise in precise tumor therapy in future clinical translation.

Multifunctional composite films based on polyvinyl alcohol, quaternary ammonium salt modified cellulose nanofibers and tannic acid-iron ion coordination complexes for food packaging

The development of sustainable and well-performing food packaging materials takes on critical significance, whereas it is still challenging. To overcome the shortcomings of polyvinyl alcohol (PVA) as a degradable packaging material, in this work, hydrophobic quaternary ammonium salt (QAS) modified cellulose nanofibers (CNF) and tannic acid‑iron ion coordination complexes (TA-Fe) were adopted for the preparation of functional PVA films. The modified CNF (CNF-QAS) not only improved the mechanical properties and water resistance of PVA, but also endowed it with antibacterial ability. In addition, the synergistic antibacterial capability with CNF-QAS was achieved using TA-Fe with photothermal therapy. As a result, the modulus, elongation at break, tensile strength, and water contact angle of the prepared PVA films were examined as 88 MPa, 200 %, 11.7 MPa, and 94.8°, respectively. Furthermore, with the assistance of CNF-QAS and TA-Fe, the films inhibited the growth of E. coli and S. aureus by 99.8 % and 99.7 %, respectively, and they exhibited high cell viability of 90.5 % for L929 fibroblasts. Based on the above encouraging properties, the functional PVA films could significantly extend the shelf life of oranges for over two weeks, proving the excellent application prospects in the food packaging field.

A multifunctional hydrogel dressing with high tensile and adhesive strength for infected skin wound healing in joint regions

Most hydrogel dressings are designed for skin wounds in flat areas, and few are focused on the joint skin regions which undergo frequent movement. The mismatch of mechanical properties and poor fit between a hydrogel dressing and a wound in joint skin results in hydrogel shedding, bacterial infection and delayed healing. Therefore, it is of great significance to design and prepare a multifunctional hydrogel with high tensile and tissue-adhesive strength as well as other therapeutic effects for the treatment of joint skin wounds. In this work, a multifunctional hydrogel was reasonably prepared by simply mixing polyvinyl alcohol (PVA), borax, tannic acid (TA) and iron(III) chloride in certain proportions, which was further used to treat the skin wounds at the joint of the hind limb. Acting as the physical crosslinkers, borax and TA dynamically bond with PVA and provide the resulting hydrogel with strong tensile, fast shape-adaptive and self-healing properties. The photothermal bacteriostatic activity of the hydrogel is attributed to the formation of a metallic polyphenol network (MPN) between ferric ions and TA. In addition, the hydrogel exhibits high levels of adhesion, hemostatic performance, antioxidant abilities, and biocompatibility, and shows great potential to promote joint skin wound healing.

Adaptive Nanoparticle-Mediated Modulation of Mitochondrial Homeostasis and Inflammation to Enhance Infected Bone Defect Healing

Infected bone defects (IBDs) exhibit impaired healing due to excessive inflammation triggered by pathogen-associated molecular patterns (PAMPs) from bacteria. As a vital factor in orchestrating immune responses, mitochondrial homeostasis maintenance is central to inflammation blockade. This research developed a chameleon-like nanoplatform by covering hydroxyapatite nanoparticles with a cerium ion coordinated tannic acid supramolecular network (HA@Ce-TA), which adaptively functions to regulate mitochondrial homeostasis based on intra- and extracellular environments. Extracellularly, acidic conditions activate HA@Ce-TA's peroxidase/oxidase-mimicking activity to produce reactive oxygen species (ROS), and external near-infrared (NIR) irradiation excites nanoscale Ce-TA to produce hyperthermia, which is found and explained by chemical computation. ROS production with photothermal therapy can eliminate bacteria effectively and reduce mitochondrial stress. Intracellularly, HA@Ce-TA remodels mitochondrial dynamics by upregulating mitochondrial fusion genes and eliminates excessive ROS by mimicking superoxidase/catalase. Consequently, this comprehensive modulation of mitochondrial homeostasis inhibits inflammasome overactivation. In vitro and in vivo studies showed HA@Ce-TA can modulate the mitochondria-centered inflammatory cascade to enhance IBD treatment, highlighting the potential of engineering nanotherapeutics to recalibrate mitochondrial homeostasis as an infected disease-modifying intervention.

Nature-Derived Polysaccharide-Based Composite Hydrogels for Promoting Wound Healing

Numerous innovative advancements in dressing technology for wound healing have emerged. Among the various types of wound dressings available, hydrogel dressings, structured with a three-dimensional network and composed of predominantly hydrophilic components, are widely used for wound care due to their remarkable capacity to absorb abundant wound exudate, maintain a moisture environment, provide soothing and cooling effects, and mimic the extracellular matrix. Composite hydrogel dressings, one of the evolved dressings, address the limitations of traditional hydrogel dressings by incorporating additional components, including particles, fibers, fabrics, or foams, within the hydrogels, effectively promoting wound treatment and healing. The added elements enhance the features or add specific functionalities of the dressings, such as sensitivity to external factors, adhesiveness, mechanical strength, control over the release of therapeutic agents, antioxidant and antimicrobial properties, and tissue regeneration behavior. They can be categorized as natural or synthetic based on the origin of the main components of the hydrogel network. This review focuses on recent research on developing natural polysaccharide-based composite hydrogel wound dressings. It explores their preparation and composition, the reinforcement materials integrated into hydrogels, and therapeutic agents. Furthermore, it discusses their features and the specific types of wounds where applied.

Development and characterization of pH responsive sodium alginate hydrogel containing metal-phenolic network for anthocyanin delivery

Favorable hydrogels can be used as a material to deliver bioactive molecules and improve the stability of bioactive substances, while their safety needs to be improved. In this study, protocatechuic acid (PCA) and Fe3+ were rapidly self-assembled to form a metal-phenolic network under different pH conditions, and then sodium alginate (SA) was added to prepare the SA/PCA/Fe hydrogel without adding other chemical reagents. The structural characteristic of SA/PCA/Fe hydrogel was characterized by infrared spectroscopy, X-ray diffraction analysis and scanning electron microscopy. The results showed that the structures of SA/PCA/Fe hydrogels prepared at different pH values were significantly different. The texture analysis, water-holding measurement and rheological analysis indicated that the SA/PCA/Fe hydrogel showed higher gel strength, water holding capacity and storage modulus. Thermogravimetric analysis illuminated that the SA/PCA/Fe hydrogel enhanced the thermal stability of free anthocyanins through encapsulating anthocyanins. Moreover, in vitro simulated digestion experiment revealed that SA/PCA/Fe hydrogel could control the release of anthocyanins in the simulated gastrointestinal tract. To sum up, this present study might provide a safer and feasible way for the delivery of bioactive substances.

Nanomaterials-Based Wound Dressing for Advanced Management of Infected Wound

The effective prevention and treatment of bacterial infections is imperative to wound repair and the improvement of patient outcomes. In recent years, nanomaterials have been extensively applied in infection control and wound healing due to their special physiochemical and biological properties. Incorporating antibacterial nanomaterials into wound dressing has been associated with improved biosafety and enhanced treatment outcomes compared to naked nanomaterials. In this review, we discuss progress in the application of nanomaterial-based wound dressings for advanced management of infected wounds. Focus is given to antibacterial therapy as well as the all-in-one detection and treatment of bacterial infections. Notably, we highlight progress in the use of nanoparticles with intrinsic antibacterial performances, such as metals and metal oxide nanoparticles that are capable of killing bacteria and reducing the drug-resistance of bacteria through multiple antimicrobial mechanisms. In addition, we discuss nanomaterials that have been proven to be ideal drug carriers for the delivery and release of antimicrobials either in passive or in stimuli-responsive manners. Focus is given to nanomaterials with the ability to kill bacteria based on the photo-triggered heat (photothermal therapy) or ROS (photodynamic therapy), due to their unparalleled advantages in infection control. Moreover, we highlight examples of intelligent nanomaterial-based wound dressings that can detect bacterial infections in-situ while providing timely antibacterial therapy for enhanced management of infected wounds. Finally, we highlight challenges associated with the current nanomaterial-based wound dressings and provide further perspectives for future improvement of wound healing.