Development of sodium alginate-pectin/TiO2 nanocomposites: Antibacterial and bioactivity investigations

The interactions of pectin with TiO2 nanoparticles measured by FT-IR are confirmed in a model of the gastrointestinal tract

The presence of nanoparticle fractions (<100 nm, NPs) in the food additive TiO2 (E171) rises concerns about its potential harmful impact on human health. The knowledge about the interaction of TiO2 NPs with food components is limited to proteins or polyphenols. The present paper is the first to report on interactions between TiO2 NPs and high molecular pectins that form gels in boluses and are remain nearly intact during digestion until they reach the colon. Direct interactions were studied using Fourier Transform Infrared Spectroscopy while indirect ones were monitored by measuring the "absorption" of TiO2 using a 0.2 microfiltration membrane, during in vitro digestion in a model of the gastro-intestinal tract. The FT-IR spectra registered for pectin-TiO2 NPs solutions confirmed changes in band intensities at 1020, 1100, 1610, and 1740 cm-1, suggesting interactions taking place mainly via the COO- groups. Furthermore, the I(1020)/I(1100) ratio was decreased (C-O stretching vibrations), suggesting partial blocking of the skeletal vibrations caused by interactions between pectin and TiO2. The modelled in vitro digestions confirmed that the "availability" of Ti was reduced when TiO2 NPs were combined with pectin, as compared to TiO2 NPs "digested" alone.

Preparation and characterization of pectin/hydroxyethyl cellulose/clay/TiO2 bionanocomposite films for microbial pathogen removal from contaminated water

Some of conventional wastewater disinfectants can have a harmful influence on the environment as well as human health. The aim of this investigation was synthesis and characterizes ecofriendly pectin/hydroxyethyl cellulose (HEC)/clay and pectin/HEC/clay incorporated with titanium dioxide nanoparticles (TiO2NPs) and use the prepared bionanocomposite as microbial disinfectants for real wastewater. Pectin/HEC/clay and pectin/HEC/clay/TiO2 bionanocomposite were characterized by various methods including X-ray diffraction (XRD), scanning electron microscope (SEM), and Fourier-transform infrared spectroscopy (FTIR), thermal gravimetric analysis (TGA). Mechanical properties and water vapor permeability (WVP) were carried out. The results of SEM showed that, the prepared bionanocomposite had a smooth surface. Additionally, TiO2 nanoparticles to the pectin/HEC/clay composites may lead to changes in the FTIR spectrum. The intensity of XRD peaks indicated that, TiO2NPs was small size crystallite. TGA illustrated that pectin has moderate thermal stability, while HEC generally exhibits good thermal stability. The TEM showed that, TiO2 nanoparticles have diameters <25 nm. On the other hand, antimicrobial activities of pectin/HEC/clay against Escherichia coli (E. coli), Staphylococcus aureus and Candida albicans have been enhanced by adding TiO2NPs. The minimum inhibitory concentration (MIC) of pectin/HEC/clay/TiO2 against E. coli was 200 mg/mL. Moreover, complete eradication of E. coli, Salmonella and Candida spp. from real wastewater was observed by using pectin/HEC/clay/TiO2 bionanocomposite. Finally, it can be concluded that, the synthesized bionanocomposite is environmentally friendly and considered an excellent disinfectant matter for removal of the microbial pathogens from wastewater to safely reuse.

Remodeling Microenvironment for Implant-Associated Osteomyelitis by Dual Metal Peroxide

Implant-associated osteomyelitis (IAOM) is characterized by bone infection and destruction; current therapy of antibiotic treatment and surgical debridement often results in drug resistance and bone defect. It is challenging to develop an antibiotic-free bactericidal and osteogenic-enhanced strategy for IAOM. Herein, an IAOM-tailored antibacterial and osteoinductive composite of copper (Cu)-strontium (Sr) peroxide nanoparticles (CSp NPs), encapsulated in polyethylene glycol diacrylate (PEGDA) (CSp@PEGDA), is designed. The dual functional CSp NPs display hydrogen peroxide (H2O2) self-supplying and Fenton catalytic Cu2+ ions' release, generating plenty of hydroxyl radical (•OH) in a pH-responsive manner for bacterial killing, while the released Sr2+ promotes the in vitro osteogenicity regarding cell proliferation, alkaline phosphatase activity, extracellular matrix calcification, and osteo-associated genes expression. The integration of Cu2+ and Sr2+ in CSp NPs together with the coated PEGDA hydrogel ensures the stable and sustainable ion release during short- and long-term periods. Benefitted from the injectablity and photo-crosslink ability, CSp@PEGDA is able to thoroughly fill the infectious site and gelate in situ for bacterial elimination and bone regeneration, which is verified through in vivo evaluation using a clinical-simulating IAOM mouse model. These favorable abilities of CSp@PEGDA precisely meet the multiple therapeutic needs and pave a promising way for implant-associated osteomyelitis treatment.

Pectin/sodium alginate-based active film integrated with microcrystalline cellulose and geraniol for food packaging applications

Biopolymer-based packaging films were prepared from pectin (PEC) and sodium alginate (SA), with the incorporation of 10 % MCC and different concentrations of geraniol (GER at 2.5, 5.0, 7.5, and 10.0 %). Rheological properties suggested that film-forming solutions and film-forming emulsions exhibited a shear-thinning or pseudo-plastic non-Newtonian behaviour. The dried films were crosslinked with 2.0 % CaCl2. The addition of MCC into PEC/SA film enhanced the TS but reduced it with the impregnation of GER without influencing the EAB and toughness of the film. The water solubility of the films significantly reduced with the rise in the GER levels but enhanced the water vapor and oxygen barrier attributes. TGA demonstrated that incorporating MCC reduced the film's thermal degradation (44.92 % to 28.81 %), but GER had an insignificant influence on the thermal stability. FTIR spectra revealed that hydrogen bond formation was positively linked with the GER addition in the film formulation. X-ray diffractograms showed that prepared films were predominantly amorphous. Antimicrobial studies showed a complete reduction of Escherichia coli and Bacillus cereus in 24 h. Overall, the composite film displayed excellent physical and active properties and PEC/SA/MCC/5.0 %GER/CaCl2 film was considered the best formulation for food packaging applications.

TiO2-Alginate-Chitosan-Based Composites for Skin Tissue Engineering Applications

The UV-B component of sunlight damages the DNA in skin cells, which can lead to skin cancer and premature aging. Therefore, it is necessary to use creams that also contain UV-active substances. Many sunscreens contain titanium dioxide due to its capacity to absorb UV-B wavelengths. In the present study, titan dioxide was introduced in alginate and chitosan-alginate hydrogel composites that are often involved as scaffold compositions in tissue engineering applications. Alginate and chitosan were chosen due to their important role in skin regeneration and skin protection. The composites were cross-linked with calcium ions and investigated using FT-IR, Raman, and UV-Vis spectroscopy. The stability of the obtained samples under solar irradiation for skin protection and regeneration was analyzed. Then, the hydrogel composites were assayed in vitro by immersing them in simulated body fluid and exposing them to solar simulator radiation for 10 min. The samples were found to be stable under solar light, and a thin apatite layer covered the surface of the sample with the two biopolymers and titanium dioxide. The in vitro cell viability assay suggested that the anatase phase in alginate and chitosan-alginate hydrogel composites have a positive impact.

Single-Walled (Magnetic) Carbon Nanotubes in a Pectin Matrix in the Design of an Allantoin Delivery System

Single-walled carbon nanotubes (SWCNTs) outperform other materials due to their high conductivity, large specific surface area, and chemical resistance. They have numerous biomedical applications, including the magnetization of the SWCNT (mSWCNT). The drug loading and release properties of see-through pectin hydrogels doped with SWCNTs and mSWCNTs were evaluated in this study. The active molecule in the hydrogel structure is allantoin, and calcium chloride serves as a cross-linker. In addition to mixing, absorption, and swelling techniques, drug loading into carbon nanotubes was also been studied. To characterize the films, differential scanning calorimetry (DSC), thermal gravimetric analysis (TGA), Fourier transform infrared (FTIR) spectroscopy, surface contact angle measurements, and opacity analysis were carried out. Apart from these, a rheological analysis was also carried out to examine the flow properties of the hydrogels. The study was also expanded to include N-(9-fluorenyl methoxycarbonyl)glycine-coated SWCNTs and mSWCNTs as additives to evaluate the efficiency of the drug-loading approach. Although the CNT additive was used at a 1:1000 weight ratio, it had a significant impact on the hydrogel properties. This effect, which was first observed in the thermal properties, was confirmed in rheological analyses by increasing solution viscosity. Additionally, rheological analysis and drug release profiles show that the type of additive causes a change in the matrix structure. According to TGA findings, even though SWCNTs and mSWCNTs were not coated more than 5%, the coating had a significant effect on drug release control. In addition to all findings, cell viability tests revealed that hydrogels with various additives could be used for visual wound monitoring, hyperthermia treatment, and allantoin release in wound treatment applications.

Construction of antibacterial bone implants and their application in bone regeneration

Bacterial infection represents a prevalent challenge during the bone repair process, often resulting in implant failure. However, the extensive use of antibiotics has limited local antibacterial effects at the infection site and is prone to side effects. In order to address the issue of bacterial infection during the transplantation of bone implants, four types of bone scaffold implants with long-term antimicrobial functionality have been constructed, including direct contact antimicrobial scaffold, dissolution-penetration antimicrobial scaffold, photocatalytic antimicrobial scaffold, and multimodal synergistic antimicrobial scaffold. The direct contact antimicrobial scaffold involves the physical penetration or disruption of bacterial cell membranes by the scaffold surface or hindrance of bacterial adhesion through surface charge, microstructure, and other factors. The dissolution-penetration antimicrobial scaffold releases antimicrobial substances from the scaffold's interior through degradation and other means to achieve local antimicrobial effects. The photocatalytic antimicrobial scaffold utilizes the absorption of light to generate reactive oxygen species (ROS) with enhanced chemical reactivity for antimicrobial activity. ROS can cause damage to bacterial cell membranes, deoxyribonucleic acid (DNA), proteins, and other components. The multimodal synergistic antimicrobial scaffold involves the combined use of multiple antimicrobial methods to achieve synergistic effects and effectively overcome the limitations of individual antimicrobial approaches. Additionally, the biocompatibility issues of the antimicrobial bone scaffold are also discussed, including in vitro cell adhesion, proliferation, and osteogenic differentiation, as well as in vivo bone repair and vascularization. Finally, the challenges and prospects of antimicrobial bone implants are summarized. The development of antimicrobial bone implants can provide effective solutions to bacterial infection issues in bone defect repair in the foreseeable future.

Antibacterial Nanocellulose-TiO2/Polyester Fabric for the Recyclable Photocatalytic Degradation of Dyes

In this paper, we report an antibacterial, recyclable nanocellulose-titanium dioxide/polyester nonwoven fabric (NC-TiO2/PET) composite for the highly efficient photocatalytic degradation of dyes. The NC-TiO2 was loaded onto the surface of flexible PET nonwoven fabric through a simple swelling and dipping method. The NC-TiO2 in the particle size range of ~10 nm were uniformly attached to the surface of the PET fibers. The NC-TiO2/PET composite has the ability to achieve the stable photocatalytic degradation of dyes and presents antibacterial properties. The degradation rates to methylene blue (MB) and acid red (AR) of the NC-TiO2/PET composite reached 90.02% and 91.14%, respectively, and the inhibition rate of Escherichia coli was >95%. After several rounds of cyclic testing, the photocatalytic performance, antibacterial performance, and mechanical stability of the NC-TiO2/PET composite remained robust.

Polysaccharide-based antibacterial coating technologies

To tackle antimicrobial resistance, a global threat identified by the United Nations, is a common cause of healthcare-associated infections (HAI) and is responsible for significant costs on healthcare systems, a substantial amount of research has been devoted to developing polysaccharide-based strategies that prevent bacterial attachment and biofilm formation on surfaces. Polysaccharides are essential building blocks for life and an abundant renewable resource that have attracted much attention due to their intrinsic remarkable biological potential antibacterial activities. If converted into efficient antibacterial coatings that could be applied to a broad range of surfaces and applications, polysaccharide-based coatings could have a significant potential global impact. However, the ultimate success of polysaccharide-based antibacterial materials will be determined by their potential for use in manufacturing processes that are scalable, versatile, and affordable. Therefore, in this review we focus on recent advances in polysaccharide-based antibacterial coatings from the perspective of fabrication methods. We first provide an overview of strategies for designing polysaccharide-based antimicrobial formulations and methods to assess the antibacterial properties of coatings. Recent advances on manufacturing polysaccharide-based coatings using some of the most common polysaccharides and fabrication methods are then detailed, followed by a critical comparative overview of associated challenges and opportunities for future developments. STATEMENT OF SIGNIFICANCE: Our review presents a timely perspective by being the first review in the field to focus on advances on polysaccharide-based antibacterial coatings from the perspective of fabrication methods along with an overview of strategies for designing polysaccharide-based antimicrobial formulations, methods to assess the antibacterial properties of coatings as well as a critical comparative overview of associated challenges and opportunities for future developments. Meanwhile this work is specifically targeted at an audience focused on featuring critical information and guidelines for developing polysaccharide-based coatings. Including such a complementary work in the journal could lead to further developments on polysaccharide antibacterial applications.

Modulation of physicochemical properties and antimicrobial activity of sodium alginate films through the use of chestnut extract and plasticizers

Due to the growing demand for robust and environmentally friendly antimicrobial packaging materials, biopolymers have recently become extensively investigated. Although biodegradable biopolymers usually lack mechanical properties, which makes it inevitable to blend them with plasticizers. The purpose of this study was to investigate plasticization efficiency of bio-based plasticizers introduced into sodium alginate compositions containing chestnut extract and their effect on selected film properties, including primarily mechanical and antibacterial properties. The films were prepared by the casting method and sodium alginate was cross-linked with calcium chloride. Six different plasticizers, including three commercially available ones (glycerol, epoxidized soybean oil and palm oil) and three synthesized plasticizers that are mixtures of bio-based plasticizers, were used to compare their influence on the film properties. Interactions between the polymer matrix and the plasticizers were investigated using Fourier transform infrared spectroscopy. The morphological characteristics of the films were characterized by scanning electron microscopy. Thermal properties, tensile strength, elongation at break, hydrophilic, and barrier properties of the obtained films were also determined. To confirm the obtaining of active films through the use of chestnut extract and to study the effect of the proposed plasticizers on the antibacterial activity of the extract, the obtained films were tested against bacteria cultures. The final results showed that all of the obtained films exhibit a hydrophilic character and high barrier effect to oxygen, carbon dioxide and water vapor. In addition, sodium alginate films prepared with chestnut extract and the plasticizer proposed by us, showed better mechanical and antimicrobial properties than the films obtained with chestnut extract and the commercially available plasticizers.

Sodium alginate/chitosan-coated TiO2NPs hybrid fiber with photocatalytic self-cleaning property, UV resistance and enhanced tensile strength

SA/CS-coated TiO₂NPs hybrid fibers with photocatalytic self-cleaning properties, UV resistance and enhanced tensile strength were successfully prepared by adding CS-coated TiO₂NPs to SA matrix. The FTIR and TEM results demonstrate the successful preparation of CS-coated TiO₂NPs core-shell structured composite particles. SEM and Tyndall effect results showed that the core-shell particles were uniformly dispersed in the SA matrix. When the content of Core-shell particles increased from 0.1 to 0.3 wt%, the tensile strength of SA/CS-coated TiO₂NPs hybrid fibers increased from 26.89 to 64.45 % compared with SA/TiO₂NPs hybrid fibers. The SA/CS-coated TiO₂NPs hybrid fiber (0.3 wt%) exhibits excellent photocatalytic degradation performance, achieving a 90 % degradation rate for the RhB solution. And the fibers also exhibit outstanding photocatalytic degradation performance towards various dyes and stains commonly encountered in daily life, including methyl orange, malachite green, Congo red, coffee and mulberry juice. The UV transmittance of the SA/CS-coated TiO₂NPs hybrid fibers decreased significantly from 90 % to 75 % with the increase in core-shell particle addition, and correspondingly, the UV absorption capacity increased. The SA/CS-coated TiO₂NPs hybrid fibers prepared lay the groundwork for potential applications in various fields, including textiles, automotive engineering, electronics and medicine.

UV-blocking biodegradable film based on flaxseed mucilage/pectin impregnated with titanium dioxide and calcium chloride for food packaging applications

A UV blocking and potentially biodegradable composite films are fabricated from flax seed mucilage and pectin with different concentrations of titanium dioxide (TiO₂) and crosslinked with calcium chloride (CaCl₂). This study aimed to evaluate the physical, surface, and optical properties including color, potential biodegradability, and absorption kinetics of the developed film. From the observations made, addition of 5 wt% TiO₂ enhanced UV barrier property with a total color change (ΔE) of 23.441 ± 0.54 and increased its crystallinity to 54.1 % from 43.6 %. Crosslinking agent and TiO₂ resulted in a prolonged period of biodegradation of >21 days when compared to neat film. Also, swelling index of crosslinked film was reduced by 3 times of non-crosslinked films. Surface of the developed films has no cracks and agglomerates as observed from scanning electron microscope. Moisture absorption kinetic study reveals that all the films have best-fit data following a pseudo-second-order kinetic model with a correlation coefficient ≥0.99 and the rate was controlled by inter-particle diffusion. The film with 1 wt% TiO₂ and 5 wt% CaCl₂ showed the lowest rate constants (k₁) of 0.27 and (k₂) of 0.029. The results suggest that this film can be potentially used in food packaging as a UV-blocking layer with potential biodegradability and good moisture resistance as compared to pure flax seed mucilage or pectin films.

Surface modification of TiO2 nanoparticles with organic molecules and their biological applications

In recent years, titanium(IV) dioxide nanoparticles (TiO₂NPs) have shown promising potential in various biological applications such as antimicrobials, drug delivery, photodynamic therapy, biosensors, and tissue engineering. For employing TiO₂NPs in these fields, their nanosurface must be coated or conjugated with organic and/or inorganic agents. This modification can improve their stability, photochemical properties, biocompatibility, and even surface area for further conjugation with other molecules such as drugs, targeting molecules, polymers, etc. This review describes the organic-based modification of TiO₂NPs and their potential applications in the mentioned biological fields. In the first part of this review, around 75 recent publications (2017-2022) are mentioned on the common TiO₂NP modifiers including organosilanes, polymers, small molecules, and hydrogels, which improve the photochemical features of TiO₂NPs. In the second part of this review, we presented 149 recent papers (2020-2022) about the use of modified TiO₂NPs in biological applications, in which specific bioactive modifiers are introduced in this part with their advantages. In this review, the following information is presented: (1) the common organic modifiers for TiO₂NPs, (2) biologically important modifiers and their benefits, and (3) recent publications on biological studies on the modified TiO₂NPs with their achievements. This review shows the paramount significance of the organic-based modification of TiO₂NPs to enhance their biological effectiveness, paving the way toward the development of advanced TiO₂-based nanomaterials in nanomedicine.

Immobilization of ZnIn2S4 on sodium alginate foam for efficient hexavalent chromium removal

Photocatalytic technology has been extensively studied in the removal of toxic Cr(VI) from wastewater. However, common powdery photocatalysts suffer from poor recyclability and secondly pollution. Herein, the zinc indium sulfide (ZnIn₂S₄) particles were integrated onto the sodium alginate foam(SA) matrix through a facile way to obtain foam-shape catalyst. Diverse characterization techniques including X-ray diffraction(XRD), Fourier transform infrared(FT-IR), scanning electron microscope(SEM) and X-ray photoelectron spectroscopy(XPS) were employed to reveal the composite compositions, organic-inorganic interface interactions, mechanical property, and pore morphology of the foams. Results demonstrated that the ZnIn₂S₄ crystals wrapped on SA skeleton tightly and constructed a flower-like structure. As-prepared hybrid foam with lamellar structure showed great potential in Cr(VI) treatment due to the presence of macropores and highly available active sites. A maximum Cr(VI) photoreduction efficiency of 93 % were observed over the optimal sample of ZS-1 (with a ZnIn₂S₄:SA mass ratio of 1:1) under visible irradiation. When tested with mixed pollutants (Cr(VI)/dyes), the ZS-1 sample displayed an enhanced removal efficiency of 98 % for Cr(VI) and 100 % for Rhodamine B(RhB). Moreover, the composite maintained prominent photocatalytic performance and a relatively integral 3D structure scaffold after continuous six runs, revealing its superior reusability and durability.

A visual bi-layer sensor based on Agar/TiO2/butterfly bean flower anthocyanin/κ-carrageenan with photostability for monitoring Penaeus chinensis freshness

Visual indicator bi-layer films were manufactured incorporating κ-carrageenan, butterfly pea flower anthocyanin, varying Nano‑titanium dioxide (TiO₂) content and agar for Penaeus chinensis (Chinese white shrimp) freshness detection. The κ-carrageenan-anthocyanin (CA) layer served as indicator, while the TiO₂-agar (TA) layer functioned as the protective layer to improve the photostability of film. The bi-layer structure was characterized by scanning electron microscopy (SEM). The TA2-CA film had the best tensile strength with a value of 17.8 MPa and the lowest water vapor permeability (WVP) value of bi-layer films was 2.98 × 10^-7 g.m^-1.h^-1.pa^-1. The bi-layer film protected anthocyanin against exudation when immersed in aqueous solution of varying pH. The TiO₂ particles filled the pores of the protective layer, increasing the opacity from 1.61 up to 4.49 significantly improving the photostability with a consequent slight color change under illumination of UV/visible light. Under UV irradiation, the TA2-CA film had no significant color change with a ΔE value of 4.23. Finally, the TA2-CA films showed an obvious color change from blue to yellow green in the early stages of Penaeus chinensis putrefaction (≤48 h) then the color change and Penaeus chinensis freshness were well correlated (R² = 0.8739).

Simple, One-Pot Method for Preparing Transparent Ethyl Cellulose Films with Good Mechanical Properties

In this research, ethyl cellulose films were prepared by a simple, easy, controlled one-pot method using either ethanol or ethyl lactate as solvents, the films being formed at 6 °C. Titanium dioxide nanoparticles were incorporated to improve the oxygen transmission and water vapour transmission rates of the obtained films. This method used no plasticizers, and flexible materials with good mechanical properties were obtained. The resulting solvent-free and transparent ethyl cellulose films exhibited good mechanical properties and unique free-shapable properties. The obtained materials had similar properties to those reported in the literature, where plasticizers were incorporated into ethyl cellulose films with an elastic modulus of 528 MPa. Contact angles showed the hydrophobic nature of all the prepared materials, with contact angles between 80 and 108°. Micrographs showed the smooth surfaces of the prepared samples and porous intersections with honeycomb-like structures. The oxygen and water vapor transmission rates were the lowest for the ethyl cellulose films prepared in ethyl lactate, these being 615 cm³·m⁻²·day⁻¹ and 7.8 gm⁻²·day⁻¹, respectively, showing that the films have promise for food packaging applications.

Biopolymer-Based Films from Sodium Alginate and Citrus Pectin Reinforced with SiO2

Blend films based on sodium alginate (SA) and citrus pectin (P) reinforced with different concentrations of SiO₂ (0–10% w/w) were developed in this study. From the morphological (SEM) and structural (FT-IR) evaluation, it was verified that the incorporation of the reinforcing agent did not drastically modify the microstructure of the films, nor did new chemical bonds form. However, the XRD results suggested a slight reduction in the crystallinities of the blends by the incorporation of SiO₂. Among the formulations prepared, the addition of a 5% reinforcing agent was responsible for the simultaneous improvement of mechanical and barrier properties. Comparing the control sample (SA/P) with the SA/P/5.0%SiO₂ film, the tensile strength increased from 27.7 ± 3.7 to 40.6 ± 4.5 MPa, and the water-vapor transmission rate decreased from 319.8 ± 38.7 to 288.9 ± 23.5 g m⁻² day⁻¹. Therefore, SiO_2, as a reinforcing agent in SA/P blends, represents a simple and effective strategy for improving the properties of biopolymer-based films in applications, such as packaging.