Preparation, characterization and antibacterial activity of new ionized chitosan

Effect of the structure of chitosan quaternary ammonium salts with different spacer groups on antibacterial and antibiofilm activities

In this study, three types of dodecyl chitosan quaternary ammonium salts, each with different spacer groups were synthesized. These chitosan derivatives are N',N'-dimethyl-N'-dodecyl-ammonium chloride-N-amino-acetyl chitosan (DMDAC), N'-dodecyl-N-isonicotinyl chitosan chloride (DINCC) and N',N'-dimethyl-N'-dodecyl-ammonium chloride-N-benzoyl chitosan (DMDBC). The synthesized products were characterized using Fourier transform infrared spectrometers, nuclear magnetic resonance, thermogravimetric analysis, and elemental analysis. The antibacterial and antibiofilm activities against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) were investigated. The experimental results indicated that the introduction of hydrophobic groups of spacer groups could enhance the antibacterial and antibiofilm activities of the chitosan derivatives. The antibacterial rates of the chitosan derivatives were over 90 % for both E. coli and S. aureus at a concentration of 0.5 mg/mL. The chitosan derivatives removed >50 % of the mature biofilm of E. coli and over 90 % of the mature biofilm of S. aureus at a concentration of 2.5 mg/mL. Further, the synthesized chitosan derivatives were determined to be non-toxic to L929 cells. Among them, DMDBC exhibited the most promising overall performance and show potential for wide-ranging applications in food preservation, disinfectants, medical, and other fields.

In vitro and in silico approach towards antimicrobial and antioxidant behaviour of water-soluble chitosan dialdehyde biopolymers

Chitosan dialdehyde (ChDA) was prepared from a three-step process initiated by thermal organic acid hydrolysis, periodate oxidization, and precipitation from native chitosan (NCh). The developed ChDA resulted in an aldehydic content of about 82 % with increased solubility (89 %) and maximum yield (97 %). The functional alteration of the aldehydic (-CHO) group in ChDA was established using vibrational stretching at 1744 cm-1. The increase in the zone of inhibition of ChDA compared to NCh has confirmed the inherent antimicrobial effect against bacterial and fungal species. ChDA showed better antioxidant activity of about 97.4 % (DPPH) and 31.1 % (ABTS) compared to NCh, measuring 45.3 % (DPPH) and 15.9 % (ABTS), respectively. The novel insilico predictions of the ChDA's biocidal activity were confirmed through molecular docking studies. The amino acid moiety such as ARG 110 (A), ASN 206 (A), SER 208 (A), THR 117 (B), ASN 118 (B), and LYS 198 (B) residues of 7B53 peptide from E. coli represents the binding pockets responsible for interaction with aldehyde group of ChDA. Whereas PHE 115 (E), ALA 127 (H), TYR 119 (C), GLN 125 (H), ASN 175 (E), ARG 116 (E), LYS 101 (H), and LYS 129 (H) of 1IYL A peptide from Candida albicans makes possible for binding with ChDA. Hence, the synergistic effect of ChDA as a biocidal compound is found to be plausible in the drug delivery system for therapeutic applications.

A phosphorylated guanidine chitosan and UiO-66-NH2 modified magnetic nanoparticle platform for enrichment and detection of multiple bacteria

Wastewater-based epidemiology (WBE) is a powerful tool for early warning of infectious disease outbreaks. Hence, a rapid and portable pathogen monitoring system is urgent needed for on-site detection. In this work, we first reported synthesis of an artificial modulated wide-spectrum bacteria capture nanoparticle (Arg-CSP@UiO@Fe3O4). Arginine-modified phosphorylated chitosan (Arg-CSP) coating could provide strongly positive charged guanidinium group for pathogen interaction by electrostatic attraction, and UiO-66-NH2 layer could help Arg-CSP graft onto Fe3O4 magnetic particles. The capture efficiency of Arg-CSP@UiO@Fe3O4 reached 92.2 % and 97.3 % for Escherichia coli (E.coli) and Staphylococcus epidermidis (S.epidermidis)within 40 min, in 10 mL sample. To prevent pathogen degradation in sewage, a portable nucleic acid extraction-free method was also developed. UiO-66-NH2 could disintegrate in buffer with high concentration of PO43- for bacterium desorption, and then nucleic acid of the bacteria was released by heating. The DNA template concentration obtained by this method was 779.28 times higher than that of the direct thermal lysis product and 8.63 times higher than that of the commercial kit. Afterwards, multiple detection of bacteria was realized by loop-mediated isothermal amplification (LAMP). Artificial regulated pathogen desorption could prevent non-specific adsorption of nucleic acid by nanoparticles. The detection limit of Arg-CSP@UiO@Fe3O4-LAMP method was 80 cfu/mL for E.coli and 300 cfu/mL for S.epidermidis. The accuracy and reliability of the method was validated by spiked sewage samples. In conclusion, this bio-monitoring system was able to detect multiple bacteria in environment conveniently and have good potential to become an alternative solution for rapid on-site pathogen detection.

Synthesis of N-isonicotinic sulfonate chitosan and its antibiofilm activity against E. coli and S.aureus

N-(sodium 2-hydroxypropylsulfonate) chitosan (HSCS), N-sulfonate chitosan (SCS) and N-isonicotinic sulfonate chitosan (ISCS) were prepared. The structures of the prepared chitosan derivatives were characterized by nuclear magnetic resonance (1H NMR) spectroscopy, Fourier transform infrared (FTIR) spectroscopy, ultraviolet-visible (UV-vis) spectroscopy and elemental analysis (EA). Antibacterial and antibiofilm activities of these chitosan derivatives were evaluated in vitro. The minimum inhibitory concentration (MIC) of HSCS and SCS against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) were 0.625 mg/mL and 0.156 mg/mL, respectively. ISCS exhibited MIC values of 0.313 mg/mL and 0.078 mg/mL against E. coli and S. aureus, respectively. ISCS demonstrated superior antibacterial and antibiofilm properties compared to SCS and HSCS. These findings suggest that the incorporation of a pyridine structure into sulfonate chitosan enhances its antibacterial and antibiofilm activities, and the prepared ISCS has a promising application prospect for controlling the reproduction of microorganisms in the field of food packaging.

Spray-drying and rehydration on β-carotene encapsulated Pickering emulsion with chitosan and seaweed polyphenol

The spray-drying process to generate microcapsules from Pickering emulsions needs high temperatures, leading to instability of emulsions and degradation of encapsulated thermosensitive compounds (β-carotene). However, these effects may be attenuated by the introduction of seaweed polyphenols into the emulsion interfacial layers, although the effects underlying this protective mechanism have not been explored. This study evaluates the effects of spray-drying/rehydration on the morphology, encapsulation efficiency, redispersibility, and stability of β-carotene loaded Pickering emulsions stabilized by chitosan (PESC) and Pickering emulsions stabilized by chitosan/seaweed polyphenols (PESCSP). The encapsulation efficiency of β-carotene in PESCSP microcapsules (61.13 %) was higher than PESC (53.91 %). Rehydrated PESCSP exhibited more regular droplet size distribution, higher stability, stronger 3D network morphology, and lower redispersibility index (1.5) compared to rehydrated PESC. Analyses of interfacial layers of emulsions revealed that chitosan covalently bound fatty acids at their hydrophobic side. Polyphenols were linked to chitosan at the hydrophilic side of emulsions through hydrogen bonds, providing 3D network between droplets and antioxidant activities to inhibit the degradation of β-carotene. This study emphasized the role of polyphenols in the interfacial layers of Pickering emulsions for the development of efficient delivery systems and protection of β-carotene and other thermosensitive bioactive compounds during spray-drying and rehydration.

Cellulose nanofibers embedded chitosan/tannin hydrogel with high antibacterial activity and hemostatic ability for drug-resistant bacterial infected wound healing

Millions of patients annually suffer life-threatening illnesses caused by bacterial infections of skin wounds. However, the treatment of wounds infected with bacteria is a thorny issue in clinical medicine, especially with drug-resistant bacteria infections. Therefore, there is an increasing interest in developing wound dressings that can efficiently fight against drug-resistant bacterial infections and promote wound healing. In this work, an anti-drug-resistant bacterial chitosan/cellulose nanofiber/tannic acid (CS/CNF/TA) hydrogel with excellent wound management ability was developed by electrospinning and fiber breakage-recombination. The hydrogel exhibited an outstanding antibacterial property exceeding 99.9 %, even for drug-resistant bacteria. This hydrogel could adhere to the tissue surface due to its abundant catechol groups, which avoided the shedding of hydrogel during the movement. Besides, it exhibited extraordinary hemostatic ability during the bleeding phase of the wound and then regulated the wound microenvironment by absorbing water and moisturizing. Moreover, the CS/CNF/TA also promoted the regrowth of vessels and follicles, accelerating the healing of infected wound tissue, with a healing rate exceeding 95 % within a 14-day timeframe. Therefore, the CS/CNF/TA hydrogel opens a new approach for the healing of drug-resistant bacterial infected wounds.

Exploring modified chitosan-based gene delivery technologies for therapeutic advancements

One of the critical steps in gene therapy is the successful delivery of the genes. Immunogenicity and toxicity are major issues for viral gene delivery systems. Thus, non-viral vectors are explored. A cationic polysaccharide like chitosan could be used as a nonviral gene delivery vector owing to its significant interaction with negatively charged nucleic acid and biomembrane, providing effective cellular uptake. However, the native chitosan has issues of targetability, unpacking ability, and solubility along with poor buffer capability, hence requiring modifications for effective use in gene delivery. Modified chitosan has shown that the "proton sponge effect" involved in buffering the endosomal pH results in osmotic swelling owing to the accumulation of a greater amount of proton and chloride along with water. The major challenges include limited exploration of chitosan as a gene carrier, the availability of high-purity chitosan for toxicity reduction, and its immunogenicity. The genetic drugs are in their infancy phase and require further exploration for effective delivery of nucleic acid molecules as FDA-approved marketed formulations soon.

Polysaccharides as a promising platform for the treatment of spinal cord injury: A review

Spinal cord injury is incurable and often results in irreversible damage to motor function and autonomic sensory abilities. To enhance the effectiveness of therapeutic substances such as cells, growth factors, drugs, and nucleic acids for treating spinal cord injuries, as well as to reduce the toxic side effects of chemical reagents, polysaccharides have been gained attention due to their immunomodulatory properties and the biocompatibility and biodegradability of polysaccharide scaffolds. Polysaccharides hold potential as drug delivery systems in treating spinal cord injuries. This article aims to present an extensive evaluation of the potential applications of polysaccharide materials in scaffold construction, drug delivery, and immunomodulation over the past five years so that offering new directions and opportunities for the treatment of spinal cord injuries.

Recent antibacterial carbohydrate-based prodrugs, drugs and delivery systems to overcome antimicrobial resistance

Antimicrobial resistance is an increasing phenomenon that is threatening global health. Tuberculosis causative bacteria and several resistant and multidrug-resistant bacteria are widely spread and listed by the World Health Organization as global priorities for research and development. Hence, new antibacterial agents with new modes of action are urgently required. In this context, carbohydrate-based drugs have been extensively studied and used, presenting several benefits for therapeutical purposes. In this review, the latest efforts done in the carbohydrate-based antibacterial agents research field, reported from 2021 to 2023, are summarized. Carbohydrate-based prodrugs, drugs, and delivery systems are covered, highlighting derivatization of existing antibiotics, use of nanotechnology, and repurposing of available therapeutical agents as the most popular strategies used in antibacterial agents' development.

Low-Cytotoxicity, Broad-Spectrum Corn Starch-Based Antibacterial Particles that Inhibit Multidrug-Resistant Bacteria

Antimicrobial resistance is a serious problem in biomedical applications that seriously increases the risk of medical failure. Therefore, developing highly efficient antibacterial agents that inhibit the growth of multidrug-resistant bacteria is a long-standing research goal. In this report, a low-cytotoxicity and highly efficient alternative to antibiotics was designed and prepared using edible corn starch as the scaffold and 2-hydroxypropyl-trimethylammonium chloride chitosan (HTCC) as the antimicrobial agent. The HTCC/starch particles were found to have a positively charged surface over a wide pH range and to possess broad-spectrum and highly efficient antimicrobial properties. These particles inhibited the growth of standard Gram-positive and Gram-negative bacteria from the China Pharmacopoeia and a clinical multidrug-resistant bacterial strain. Moreover, after treating the HTCC/starch particles with simulated gastric fluid (SGF, pH 1.2) for 4 h, the growth of clinical multidrug-resistant Escherichia coli (NT 2036) was inhibited effectively, indicating that these particles tolerate a gastric acid environment. Although the mass of SGF-treated HTCC/starch particles required to achieve similar antibacterial activity was ∼20-fold that of chloramphenicol or ampicillin, antibiotic-containing products require considerable amounts of pharmaceutical excipients to prepare. Therefore, the HTCC/starch particles described herein are potentially cost-effective alternatives to antibiotics that resolve the antimicrobial resistance issue, especially for inhibiting the growth of pathogenic intestinal bacteria.

Enhanced biological activities of coumarin-functionalized polysaccharide derivatives: Chemical modification and activity assessment

Natural polysaccharides are abundant and renewable resource, but their applications are hampered by limited biological activity. Chemical modification can overcome these drawbacks by altering their structure. Three series of polysaccharide derivatives with coumarins were synthesized to obtain polysaccharide derivatives with enhanced biological activity. The biological activities were tested, including antioxidant property, antifungal property, and antibacterial property. Based on the results, the inhibitory properties of the coumarin-polysaccharide derivatives were significantly improved over the raw polysaccharide. The IC50 of the inhibition of DPPH, ABTS•+, and superoxide (O2•-) radical-scavenging was 0.06-0.15 mg/mL, 2.3-15.9 μg/mL, and 0.03-0.25 mg/mL, respectively. Compared with the raw polysaccharides, coumarin- polysaccharide derivatives exhibited higher efficacy in inhibiting the growth of tested phytopathogens, showing inhibitory indices of 60.0-93.6 % at 1.0 mg/mL. Chitosan derivatives with methyl and chlorine (Compound 10B and 10C) exhibited significant antibacterial activity against S. aureus (MIC = 31.2 μg/mL), E. coli (MIC = 7.8 μg/mL), and V. harveyi (MIC = 15.6 μg/mL), respectively. The results of the cytotoxicity assay showed no observed cytotoxicity when the RAW 264.7 cells were incubated with the synthesized polysaccharide derivatives at the tested concentrations.

Self-Assembled Amphiphilic Chitosan Nanomicelles: Synthesis, Characterization and Antibacterial Activity

Although amphiphilic chitosan has been widely studied as a drug carrier for drug delivery, fewer studies have been conducted on the antimicrobial activity of amphiphilic chitosan. In this study, we successfully synthesized deoxycholic acid-modified chitosan (CS-DA) by grafting deoxycholic acid (DA) onto chitosan C2-NH2, followed by grafting succinic anhydride, to prepare a novel amphiphilic chitosan (CS-DA-SA). The substitution degree was 23.93% for deoxycholic acid and 29.25% for succinic anhydride. Both CS-DA and CS-DA-SA showed good blood compatibility. Notably, the synthesized CS-DA-SA can self-assemble to form nanomicelles at low concentrations in an aqueous environment. The results of CS, CS-DA, and CS-DA-SA against Escherichia coli and Staphylococcus aureus showed that CS-DA and CS-DA-SA exhibited stronger antimicrobial effects than CS. CS-DA-SA may exert its antimicrobial effect by disrupting cell membranes or forming a membrane on the cell surface. Overall, the novel CS-DA-SA biomaterials have a promising future in antibacterial therapy.

Preparation of imidazole acids grafted chitosan with enhanced antioxidant, antibacterial and antitumor activities

Herein, imidazole acids grafted chitosan derivatives were synthesized, including HACC, HACC derivatives, TMC, TMC derivatives, amidated chitosan and amidated chitosan bearing imidazolium salts. The prepared chitosan derivatives were characterized by FT-IR and ¹H NMR. The tests evaluated the biological antioxidant, antibacterial, and cytotoxic activities of chitosan derivatives. The antioxidant capacity (DPPH radical, superoxide anion radical and hydroxyl radical) of chitosan derivatives was 2.4-8.3 times higher than that of chitosan. The antibacterial capacity against E. coli and S. aureus of cationic derivatives (HACC derivatives, TMC derivatives, and amidated chitosan bearing imidazolium salts) was more active than only imidazole-chitosan (amidated chitosan). In particular, the inhibition effect of HACC derivatives on E. coli was 15.625 μg/mL. Moreover, the series of chitosan derivatives bearing imidazole acids showed certain activity against MCF-7 and A549 cells. The present results suggest that the chitosan derivatives in this paper seem to be promising carrier materials for use in drug delivery systems.

Development and Pharmacokinetic Evaluation of Novasomes for the Trans-nasal Delivery of Fluvoxamine Using Arachidonic Acid-Carboxymethyl Chitosan Conjugate

Depression is the major mental illness which causes along with loss of interest in daily life, a feeling of hopelessness, appetite or weight changes, anger and irritability. Due to the hepatic first-pass metabolism, the absolute bioavailability of fluvoxamine (FVM) after oral administration is about 50%. By avoiding the pre-systemic metabolism, nasal delivery would boost bioavailability of FVM. Additionally, the absorption is anticipated to occur more quickly than it would via the oral route because of the existence of microvilli and high vasculature. A nonionic surfactant, cholesterol and an arachidonic acid-carboxymethyl chitosan (AA-CMCS) conjugate were used to develop FVM-loaded novasomes. To investigate the effects of surfactant concentration, AA-CMCS conjugate concentration and stirring speed on the novasomes' characteristics, a Box-Behnken design was used. The dependent variables chosen were zeta potential, polydispersity index and particle size. The AA-CMCS conjugate was confirmed by 1H-NMR and FTIR. Using Design Expert software (version 7; Stat-Ease Inc., Minneapolis, MN, USA), novasomes were further optimized. The chosen optimal formulation (NAC8) was made up of AA-CMCS conjugate, Span 60 and cholesterol. Particle size, zeta potential and PDI values for NAC8 formulation were 101 nm, -35 mV and 0.263, respectively. The NAC8 formulation's DSC and TGA analysis demonstrated that the medication had been uniformly and amorphously distributed throughout the novasomes. The NAC8 formulation showed 99% and 90% FVM release and permeation, respectively, and the novasome adherence time was 24 h. An improved antidepressant effect along with five-fold increase in bioavailability of FVM was observed after trans-nasal administration of NAC8 formulation compared to the reference commercially available Flumin® tablets. FVM-loaded novasomes administered via the nasal route may therefore constitute an advancement in the management of depression.

Structural and conformational changes on chitosan after green heterogeneous synthesis of phenyl derivatives

Four aromatic acid compounds: benzoic acid (Bz), 4-hydroxyphenylpropionic acid (HPPA), gallic acid (GA) and 4-aminobenzoic acid (PABA) were covalently bonded to chitosan in order to improve water solubility at neutral pH. The synthesis was performed via a radical redox reaction in heterogeneous phase by employing ascorbic acid and hydrogen peroxide (AA/H₂O₂) as radical initiators in ethanol. The analysis of chemical structure and conformational changes on acetylated chitosan was also the focus of this research. Grafted samples exhibited as high as 0.46 M degree of substitution (MS) and excellent solubility in water at neutral pH. Results showed a correlation between the disruption of C3-C5 (O3…O5) hydrogen bonds with increasing solubility in grafted samples. Spectroscopic techniques such as FT-IR and ¹H and ¹³C NMR showed modifications in both glucosamine and N-Acetyl-glucosamine units by ester and amide linkage at C2, C3 and C6 position, respectively. Finally, loss of crystalline structure of 2-helical conformation of chitosan after grafting was observed by XRD and correlated with ¹³C CP-MAS-NMR analyses.

Characterization of a Novel Artemisinin Algicidal Particle and Its Inhibitory Effect on Microcystis aeruginosa

A new artemisinin sustained-release particle (ASP) was developed that significantly inhibits Microcystis aeruginosa (M. aeruginosa) growth. The physical and chemical properties of ASPs were characterized using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), differential scanning calorimetry, and thermogravimetry (DSC-TG). The results demonstrated that ASPs are thermally stable and have sustained-release properties. On the sixth day, the ASPs (0.2 g L^-1) inhibited M. aeruginosa with an inhibition rate (IR) greater than 70%. Additionally, ASPs inhibited M. aeruginosa without increasing microcystin-LR release (MC-LR). This research offers a novel approach to the management of cyanobacterial blooms.

Synthesis and evaluation of water-soluble imidazolium salt chitin with broad-spectrum antimicrobial activity and excellent biocompatibility for infected wound healing

Infections caused by bacteria have long constituted a major threat to human health and the economy. Therefore, there is an urgent need to design broad-spectrum antibacterial materials possessing good biocompatibility to treat such infections. Herein, inspired by the good biocompatibility of chitin and antibacterial properties of imidazolium salts, a polysaccharide-based material, imidazolium salt chitin (IMSC), was homogeneously prepared using a facile method with epichlorohydrin as a chemical crosslinker to combine chitin with imidazole to enhance Staphylococcus aureus (S. aureus)-infected wound healing. The characteristics, antimicrobial properties, and biosafety of IMSC were evaluated. The results demonstrated successful grafting of imidazole onto chitin. Furthermore, IMSC exhibited good water solubility, broad-spectrum antimicrobial activity, hemocompatibility, and biocompatibility. Moreover, IMSC enabled complete healing of S. aureus-infected wound in Sprague-Dawley rats within 15 days of application, thus demonstrating that IMSC could reduce wound inflammation and remarkably accelerate wound healing owing to its efficient antibacterial activity and ability to promote collagen deposition in and around the wound area. Therefore, this study provides a promising and potential therapeutic strategy for infected wound healing by synthesizing a water-soluble and broad-spectrum antimicrobial material exhibiting good biocompatibility.

A novel water-soluble chitosan grafted with nerol: Synthesis, characterization and biological activity

In order to improve the antibacterial activity of chitosan and change its solubility, a novel water-soluble chitosan (CS)-nerol (N) derivative (CS-N) was prepared via Schiff base reaction and grafting reaction. FT-IR, NMR, XRD, TGA and SEM were used to characterize the structure and physicochemical properties, and in vitro antibacterial, antioxidant, and cellular assays were used to test for bioactivity and safety. The results revealed that the C6 hydroxyl group of CS was substituted with N, with a degree of substitution of 38 % for CS-N. Furthermore, compared to CS, CS-N demonstrated superior antibacterial activity against Escherichia coli and Staphylococcus aureus, as well as significant DPPH and ABTS free radical scavenging activity. Most importantly, CS-N did not harm HaCaT cells. In conclusion, this study provides a promising strategy for the design of chitosan derivatives with significant potential for application in pharmaceutical, food and cosmetic applications.

Enhancing the Antioxidant, Antibacterial, and Wound Healing Effects of Melaleuca alternifolia Oil by Microencapsulating It in Chitosan-Sodium Alginate Microspheres

In this study, antibacterial and antioxidant molecules-rich Melaleuca alternifolia oil (tea tree oil (TTO)) loaded chitosan (CS) based nanoemulsions (NEMs) were prepared and encapsulated by sodium alginate (SA) microsphere for antibacterial wound dressing. CS-TTO NEMs were prepared by oil-in-water emulsion technique, and the nanoparticle tracking analysis (NTA) confirmed that the CS-TTO NEMs had an average particle size of 89.5 nm. Further, the SA-CS-TTO microsphere was confirmed through SEM analysis with an average particle size of 0.76 ± 0.10 µm. The existence of TTO in CS NEMs and SA encapsulation was evidenced through FTIR analysis. The XRD spectrum proved the load of TTO and SA encapsulation with CS significantly decreased the crystalline properties of the CS-TTO and SA-CS-TTO microsphere. The stability of TTO was increased by the copolymer complex, as confirmed through thermal gravimetric analysis (TGA). Furthermore, TTO was released from the CS-SA complex in a sustained manner and significantly inhibited the bacterial pathogens observed under confocal laser scanning microscopy (CLSM). In addition, CS-TTO (100 µg/mL) showed antioxidant potential (>80%), thereby increasing the DPPH and ABTS free radicals scavenging ability of SA-CS-TTO microspheres. Moreover, CS and SA-CS-TTO microsphere exhibited negligible cytotoxicity and augmented the NIH3T3 cell proliferation confirmed in the in vitro scratch assay. This study concluded that the SA-CS-TTO microsphere could be an antibacterial and antioxidant wound dressing.

Plasma etching effect on the molecular structure of chitosan-based hydrogels and its biological properties

To reasonably use hydrogels in healthcare field, this study four kinds of chitosan (CTS)-based hydrogels with different molecular structures. With plasma etching, the morphology, chemical groups' proportion, and hydrophilicity of the hydrogel surface were changed. At 40 min of modification, the ratios of CO and NH₂ on the CTS40-based hydrogel surface increased and reached their maximum values of 40.31 % and 89.17 %, respectively. Combined with the changes in hydrophilic chemical groups and the hydrogel's network structure, the hydrogel surface's wettability changed after plasma etching. From the results, CTS40-based hydrogel showed the lowest contact angle (77.40 ± 3.89°) with 80 min modification due to its dense network structure of CTS and appropriate ratio of hydrophilic groups on the surface. With these molecular structural changes, the antibacterial properties of CTS-based hydrogels against Staphylococcus aureus were improved. Moreover, the functional components delivery system coating with these CTS-based hydrogels showed colon-site controlled-release property. The hydrogels also facilitated the growth of Caco2 and Hic cells, which had 72.74 %-453.27 % cell viability of Caco2 cells on the surface. Therefore, the antibacterial property and biocompatibility of plasma modified CTS-based hydrogels have been demonstrated. The mechanism between molecular structure changes of CTS with plasma etching and its properties was discussed, which would provide a promising carrier material for utilizing healthcare field.

Chitosan-based coatings with tunable transparency and superhydrophobicity: A solvent-free and fluorine-free approach by stearoyl derivatization

One of the current greatest challenges in materials science and technology is the development of safe- and sustainable-by-design coatings with enhanced functionalities, e.g. to substitute fluorinated substances raising concerns for their potential hazard on human health. Bio-based polymeric coatings represent a promising route with a high potential. In this study, we propose an innovative sustainable method for fabricating coatings based on chitosan with modified functionality, with a fine-tuning of coating properties, namely transparency and superhydrophobicity. The process consists in two main steps: i) fluorine-free modification of chitosan functional groups with stearoyl chloride and freeze-drying to obtain a superhydrophobic powder, ii) coating deposition using a novel solvent-free approach through a thermal treatment. The modified chitosan is characterized to assess its chemico-physical properties and confirm the functionality modification with fatty acid tails. The deposition method enables tuning the coating properties of transparency and superhydrophobicity, maintaining good durability.

Ultrasonic assisted extraction of polyphenols from bayberry by deep eutectic supramolecular polymer and its application in bio-active film

Ultrasound and deep eutectic supramolecular polymers (DESP) is a novel combination of green extraction method for phytochemicals. In this study, a new type of green extractant was developed: DESP. It is a derivative of deep eutectic solvent (DES) and was prepared by supramolecular polymer unit β-cyclodextrin (β-CD) as hydrogen bond acceptor (HBA) and organic acid as hydrogen bond donor (HBD). The current work focuses on the use of ultrasonic-assisted (UAE) DESP extraction of polyphenolic compounds (PCs) from bayberry. The experimental results showed that DESP synthesized with β-CD and lactic acid (LA) in a ratio of 1:1 (w/w %) had the best extraction effect. And by using a three-level factor experiment and the response surface method, the predicted TPC content is very close to the actual content (28.85 ± 1.27 mg GAE/g). The DESP extract including PCs were further used as plasticizer for chitosan (CS) to prepare highly active green biofilms (DESP-CS). It is possible to reduce the tedious procedures for separating biologically active substances from DESP. The experiment proved that the prepared films have good mechanical properties, plastic deformation resistance, thermal stability and antioxidant activity.

Chemical modifications in the structure of marine polysaccharide as serviceable food processing and preservation assistant: A review

Marine polysaccharides are a kind of natural polysaccharides which isolated and extracted from marine organisms. Now some marine polysaccharides, such as chitosan, sodium alginate and agar, have been proven to exhibit antibacterial, antioxidant functions and biocompatibility, which are often used to preserve food or improve the physicochemical properties of food. However, they still have the defects of unsatisfactory preservation effect and biological activity, which can be remedied by its modification. Chemical modification is the most effective of all modification methods. The advances in common chemical modification methods of chitosan, sodium alginate, agar and other marine polysaccharides and research progress of modified products in food processing and preservation were summarized, and the influence of additional reaction conditions on the existence of chemical modification sites of polysaccharides was discussed. The modification of functional groups in natural marine polysaccharides leads to the change of molecular structure, which can improve the physical, chemical and biological properties of marine polysaccharides. Chemically modified products have been used in various fields of food applications, such as food preservatives, food additives, food packaging, and food processing aids. In general, chemical modification has excellent potential for food processing and preservation, which can improve the function of marine polysaccharides.

Preparation, Characterization, and Bio Evaluation of Fatty N- Hexadecanyl Chitosan Derivatives for Biomedical Applications

The objective of this study was to improve the antibacterial activities of chitosan via N-alkyl substitution using 1-bromohexadecane. Mono and di substitution (Mono-NHD-Ch and Di-NHD-Ch) were prepared and characterized using FT-IR, HNMR, TGA, DSC, and SEM. Elemental analysis shows an increase in the C/N ratio from 5.45 for chitosan to 8.63 for Mono-NHD-Ch and 10.46 for Di-NHD-Ch. The antibacterial properties were evaluated against Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus, and Bacillus cereus. In the examined microorganisms, the antibacterial properties of the novel alkyl derivatives increased substantially higher than chitosan. The minimum inhibitory concentration (MIC) of Mono-NHD-Ch and Di-NHD-Ch was perceived at 50 μg/mL against tested microorganisms, except for B. cereus. The MTT test was used to determine the cytotoxicity of the produced materials, which proved their safety to fibroblast cells. The findings suggest that the new N-Alkyl chitosan derivatives might be used as antibacterial alternatives to pure chitosan in wound infection treatments.

Synthesis of silver/Fe3O4@chitosan@polyvinyl alcohol magnetic nanoparticles as an antibacterial agent for accelerating wound healing

Bacterial infection causes wound inflammation and slows wound healing, posing a great threat to human health, which needs to explore more antibacterial nanobiomaterials to promote wound healing. Therefore, this study was conducted to develop low-cost silver/Fe₃O₄@Chitosan@polyvinyl alcohol (Ag/Fe₃O₄@CS@PVA) via a one-pot method to promote healing in bacteria-infected wounds. Scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), Fourier-transform infrared (FT-IR), X-ray photoelectron spectroscopy (XPS), and vibrating sample magnetometry (VSM) confirmed that Ag/Fe₃O₄@CS@PVA was successfully prepared. In vitro antibacterial experiments demonstrated strong antibacterial activity of Ag/Fe₃O₄@CS@PVA against Escherichia coli and Staphylococcus aureus. The Ag/Fe₃O₄@CS@PVA destroyed the bacterial cell membrane or internal structure, thus resulting in cell death for antibacterial effects. Cytotoxicity and hemolysis rate tests showed that Ag/Fe₃O₄@CS@PVA posed fine biocompatibility. In addition, in vivo assays confirmed that Ag/Fe₃O₄@CS@PVA not only promoted the healing of wound infection caused by bacteria, but also had no toxic effect on mouse organs. Therefore, the low-cost Ag/Fe₃O₄@CS@PVA nanocomposites have great potential in controlling 'bacterial' pathogen.

Water-soluble amino functionalized chitosan: Preparation, characterization, antioxidant and antibacterial activities

Amino functionalized chitosan has attracted much attention because of the fascinated bioactivities. In our study, a novel water-soluble amino functionalized chitosan bearing free amino group at C-2 and quaternary ammonium moiety contained free amino group at C-6 (5c) was prepared by a four-step method. The structural characterization was identified by FTIR and ¹H NMR spectroscopy. The water-solubility and antioxidant activities against hydroxyl, DPPH radicals and reducing power were estimated. The results displayed that amino functionalized chitosan 5c exhibited improved water-solubility and antioxidant ability, especially its DPPH scavenging rate reached about 90 % at the minimum test concentration of 0.10 mg/mL. Besides, antibacterial tests showed that amino functional chitosan 5c had best antibacterial activities, which indicated that amino group made main contribution to the enhanced bioactivities. In short, the novel chitosan 5c possessed enhanced water-solubility and excellent antioxidant and antibacterial activities, which could provide novel strategy for the development of antioxidant and antibacterial agents in biomedicine and food fields.