Nitrogen fertilizer affects starch synthesis to define non-waxy and waxy proso millet quality

Combined effects of nitrogen and sulfur fertilizers on chemical composition, structure and physicochemical properties of buckwheat starch

Buckwheat starch has attracted worldwide attention in the food industry as a valuable raw material or food additive. Nitrogen (N) and sulfur (S) are two nutrients essential to ensure grain quality. This study investigated the combined application of N fertilizer (0, 45 and 90 kg N ha-1) and S fertilizer (0 and 45 kg SO3 ha-1) on the chemical composition, structure and physicochemical properties of buckwheat starch. The results showed that increasing the fertilizer application decreased amylose content and starch granule size but increased light transmittance, water solubility and swelling power. The stability of the absorption peak positions and the decrease in short-range order degree suggested that fertilization influenced the molecular structure of buckwheat starch. In addition, increases in viscosity and gelatinization enthalpy as well as decreases in gelatinization temperatures and dynamic rheological properties indicated changes in the processing characteristics and product quality of buckwheat-based foods.

Effects of nitrogen fertilizer application on the physicochemical properties of foxtail millet (Setaria italica L.) starch

The use of nitrogen fertilizer is a crucial agronomic practice to increase crop output and quality. This study investigated the impact of five nitrogen application levels (0, 60, 135, 210, and 285 kg N/hm2) on the physicochemical properties of foxtail millet (FM) starch. Optimal nitrogen application (210 kg N/hm2) significantly increased L*, a*, and b* values, water and oil absorption capacity, water solubility, and swelling power of starch. The number of small starch granules increased as the nitrogen application rate increased, but the granule morphology and typical A-type pattern did not change among the treatments. Nitrogen application increased the relative crystallinity and ordered structure, resulting in a higher gelatinization enthalpy. Compared to the control group (7.02 J/g), the enthalpy increased by 21.94 %, 66.38 %, 73.50 %, and 103.28 % under the nitrogen application rates, respectively. Moreover, nitrogen application greatly increased the percentage of A and B3 chains while it lowered the apparent amylose content, peak viscosity, and final viscosity. The effects of 210 and 285 kg N/hm2 treatments on the water solubility and swelling power, water and oil absorption, and light transmission of starch were greater compared to the 60 and 135 kg N/hm2 treatments. These results indicate that nitrogen fertilization significantly affects the physicochemical properties of FM starch.

Effects of Sulfur Application on the Quality of Fresh Waxy Maize

Balanced fertilizer application is crucial for achieving high-yield, high-quality, and efficient maize cultivation. Sulfur (S), considered a secondary nutrient, ranks as the fourth most essential plant nutrient after nitrogen (N), phosphorus (P), and potassium (K). S deficiency could significantly influence maize growth and development. Field experiments were conducted in Jiangsu, Yangzhou, China, from April 1 to July 20 in 2023. Jingkenuo2000 (JKN2000) and Suyunuo5 (SYN5) were used as experiment materials, and four treatments were set: no fertilizer application (F0), S fertilizer application (F1), conventional fertilization method (F2), and conventional fertilization method with additional S application (F3). The objective was to investigate the impact of S application on grain weight and the quality of fresh waxy maize flour and starch. The results indicated that all fertilization treatments significantly increased grain weight and the starch and protein contents in grains compared to no fertilization. Among these, F3 exhibited the most significant increases. Specifically, in JKN2000, the grain weight, starch content (SC), and protein content (PC) increased by 27.7%, 4.8%, and 14.8%, respectively, while in SYN5, these parameters increased by 26.3%, 6.2%, and 7.4%, respectively, followed by F2 and F1. Compared to F0, F3 increased starch and protein contents by 4.8% and 14.8% in JKN2000, and by 6.2% and 7.4% in SYN5. Compared to F0, F2 and F3 significantly increased the iodine binding capacity (IBC) of SYN5, with F3 being more effective than F2, while they had no significant effect on the IBC of JKN2000. The peak viscosity (PV) and breakdown viscosity (BD) of waxy maize flour and starch for both varieties showed a consistent response (increasing trend) to S application, and F3 had the largest increase. Regarding the thermal properties of waxy maize flour, F3 significantly enhanced the retrogradation enthalpy (ΔHgel) of both varieties compared to F0, while achieving the lowest retrogradation percentage (%R). In starch, the highest ΔHgel and the lowest %R were observed under the F2 treatment. In summary, under the conditions of this experiment, adding S fertilizer to conventional fertilization not only increased the grain weight of waxy maize but also effectively optimized the pasting and thermal properties of waxy maize flour and starch.

Insights into starch synthesis and amino acid composition of common buckwheat in response to phosphate fertilizer management strategies

To investigate the response and the regulatory mechanism of common buckwheat starch, amylose, and amylopectin biosynthesis to P management strategies, field experiments were conducted in 2021 and 2022 using three phosphorus (P) levels. Results revealed that the application of 75 kg hm-2 phosphate fertilizer significantly enhanced amylopectin and total starch content in common buckwheat, leading to improved grain weight and starch yield, and decreased starch granule size. The number of upregulated differentially expressed proteins induced by phosphate fertilizer increased with the application rate, with 56 proteins identified as shared differential proteins between different P levels, primarily associated with carbohydrate and amino acid metabolism. Phosphate fertilizer inhibited amylose synthesis by downregulating granule-bound starch synthase protein expression and promoted amylopectin accumulation by upregulating 1,4-alpha-glucan branching enzyme and starch synthase proteins expression. Additionally, Phosphate fertilizer primarily promoted the accumulation of hydrophobic and essential amino acids. These findings elucidate the mechanism of P-induced starch accumulation and offer insights into phosphate fertilizer management and high-quality cultivation of common buckwheat.

Effect of Different Fertilizer Types on Quality of Foxtail Millet under Low Nitrogen Conditions

In order to clarify the effect of different fertilizers on foxtail millet quality under low nitrogen conditions, we used JGNo.21 and LZGNo.2 as experimental materials and set up five treatments, including non-fertilization, nitrogen, phosphorus, compound, and organic fertilizers, to study the regulation of different fertilizer types on agronomic traits, nutrient fractions, and pasting characteristics of foxtail millet under low nitrogen conditions. Compared with the control, all of the fertilizers improved the agronomic traits of JGNo.21 to a certain extent. Nitrogen and compound fertilizer treatments reduced the starch content of JGNo.21; the starch content was reduced by 0.55% and 0.07% under nitrogen and compound fertilizers treatments. Phosphorus and organic fertilizers increased starch content, and starch content increased by 0.50% and 0.56% under phosphorus and organic fertilizer treatments. The effect of each fertilizer treatment on protein content was completely opposite to that of starch; different fertilizer treatments reduced the fat content of JGNo.21 and increased the fiber content. Among them, nitrogen and phosphorus fertilizers increased the yellow pigment content; the yellow pigment content increased by 1.21% and 2.64% under nitrogen and phosphorus fertilizer treatments. Organic and compound fertilizers reduced the content of yellow pigment; the yellow pigment content was reduced by 3.36% and 2.79% under organic and compound fertilizer treatments. Nitrogen and organic fertilizers increased the fat content of LZGNo.2; the fat content increased by 2.62% and 1.98% under nitrogen, organic fertilizer treatment. Compound and phosphorus fertilizer decreased the fat content; the fat content decreased by 2.16% and 2.90% under compound and phosphorus fertilizer treatment. Different fertilizer treatments reduced the cellulose and yellow pigment content of LZGNo.2. The content of essential, non-essential, and total amino acids of JGNo.21 was increased under compound and nitrogen fertilizer treatments and decreased under organic and phosphorus fertilizer treatments. The content of essential, non-essential, and total amino acids of LZGNo.2 was significantly higher under compound, nitrogen, and organic fertilizer treatments compared with control and significantly decreased under phosphorus fertilizer treatments. Nitrogen and compound fertilizer treatments significantly reduced the values of peak viscosity, trough viscosity, breakdown viscosity, final viscosity, setback viscosity, and pasting time of each index of JGNo.21; phosphorus and organic fertilizer treatments improved the values of each index. In contrast, the pasting viscosity of LZGNo.2 increased under phosphorus fertilizer treatment and decreased under nitrogen fertilizer treatment. Reasonable fertilization can improve the quality of foxtail millet, which provides a scientific theoretical basis for improving the quality of foxtail millet.

Improving resilience to high temperature in drought: water replenishment enhances sucrose and amino acid metabolisms in maize grain

Heat stress poses a significant threat to maize, especially when combined with drought. Recent research highlights the potential of water replenishment to ameliorate grain weight loss. However, the mitigating mechanisms of heat in drought stress, especially during the crucial early grain-filling stage, remain poorly understood. We investigated the mechanism for mitigating heat in drought stress by water replenishment from the 12th to the 32nd days after silking in a controlled greenhouse experiment (Exp. I) and field trial (Exp. II). A significant reduction in grain weight was observed in heat stress compared to normal conditions. When water replenishment was applied to increase soil water content (SWC) under heat stress, the grain yield exhibited a notable increase ranging from 28.4 to 76.9%. XY335 variety was used for transcriptome sequencing to analyze starch biosynthesis and amino acid metabolisms in Exp. I. With water replenishment, the transcripts of genes responsible for trehalose 6-phosphate phosphates (TPP), alpha-trehalase (TRE), ADP-glcpyrophosphorylase, and starch synthase activity were stimulated. Additionally, the expression of genes encoding TPP and TRE contributed to an enhanced conversion of trehalose to glucose. This led to the conversion of sucrose from glucose-1-phosphate to ADP-glucose and ADP-glucose to amylopectin, ultimately increasing starch production by 45.1%. Water replenishment to boost SWC during heat stress also elevated the levels of essential amino acids in maize, including arginine, serine, tyrosine, leucine, glutamic acid, and methionine, providing valuable support to maize plants in adversity. Field trials further validated the positive impact of water replenishment on SWC, resulting in a notable increase in grain yield ranging from 7.1 to 9.2%. This study highlights the vital importance of adapting to abiotic stress and underscores the necessity of developing strategies to counteract its adverse effects on crop yield.

Optimization of the morphological, structural, and physicochemical properties of maize starch using straw returning and nitrogen fertilization in Northeast China

The combination of straw returning and nitrogen (N) fertilization is a popular tillage mode and essential strategy for achieving stable yield and high quality. However, the optimal combination strategy and the influence of tillage mode on the morphological, crystalline, and molecular structures of maize starch remain unclear. We conducted a long-term field experiment over 7 years in Northeast China using two tillage modes, rotary tillage with straw returning (RTS) and plow tillage with straw returning (PTS), and four N application rates. The relative crystallinity, 1045/1022 cm-1 value, and B2 and B3 chains of maize starch were higher under RTS than under PTS, resulting in increased stability of starch and improvements in gelatinization enthalpy and temperature. The surface of the starch granules induced by N fertilizer was smoother than that under the N0 (0 kg N ha-1) treatment. The proportion of amylose content, solubility, swelling power, and light transmittance increased under N2 (262 kg N ha-1) treatment, along with improvement in starch pasting properties. These results suggest that RTS combined with N2 treatment can regulate the morphological, structural, and physicochemical characteristics of maize starch, providing an essential reference for improving the quality of maize starch from an agronomic point of view.

Transcriptome analysis reveals the mechanism of nitrogen fertilizers in starch synthesis and quality in waxy and non-waxy proso millet

Recent findings suggest that optimal application of nitrogen fertilizers can effectively improve the quality of proso millet (PM). Here, we aimed to investigate the pathways associated with starch synthesis and metabolism to elucidate the effect and molecular mechanisms of nitrogen fertilization in starch synthesis and properties in waxy and non-waxy PM varieties using transcriptomic techniques. Co-expression network analysis revealed that the regulation of starch synthesis and quality in PM by nitrogen fertilizer mainly occurred in the S2 and S3 stages during grain filling. Nitrogen fertilization inhibited glycolysis/gluconeogenesis and starch biosynthesis in grains, but increased starch degradation to maltose and dextrin and then to glucose. Moreover, nitrogen fertilization increased starch accumulation by upregulating the expression of SuS and malZ genes, thereby increasing the total starch content in grains. In contrast, nitrogen fertilization suppressed the expression of GBSS gene and decreased amylose content in PM grains, resulting in a relatively higher crystallinity, light transmittance, and breakdown viscosity in the two PM varieties. Overall, these results provided transcriptomics insights into the molecular mechanisms by which nitrogen fertilization regulates starch quality in PM, identified key genes that associated with the starch properties, and provided new insights into the quality cultivation of PM.

Nitrogen fertilizer affects the cooking quality and starch properties of proso millet (Panicum miliaceum L.)

Nitrogen has a critical influence on the yield and quality of proso millet. However, the exact impact of nitrogen on the cooking quality of proso millet is not clear. In this study, the cooking quality and starch properties of two proso millet varieties (waxy-Shaanxi millet [wSM] variety and non-waxy-Shaanxi millet [nSM] variety) were compared and analyzed under nitrogen fertilizer treatment (N150, 150 kg/hm2) and a control group without nitrogen application (N0, 0 kg/hm2). Compared with the N0 group, the N150 treatment significantly increased protein content, amylose levels, and total yield. Employing rapid visco analyser and differential scanning calorimetry analyses, we observed that under the N150 treatment, the peak viscosity and breakdown viscosity of proso millet powder were diminished, while the setback viscosity and enthalpy values (ΔH) increased. In addition, nitrogen treatment increased the solids content in the obtained rice soup and significantly hardened the texture of the rice. At the same time, we noticed that the absorption capacity of starch in water and oil was enhanced. These results showed that nitrogen fertilizer had significant effects on the cooking quality and starch properties of proso millet.