Drug-free and non-crosslinked chitosan/hyaluronic acid hybrid hydrogel for synergistic healing of infected diabetic wounds

Absorption enhancement strategies in chitosan-based nanosystems and hydrogels intended for ocular delivery: Latest advances for optimization of drug permeation

Ophthalmic diseases can be presented as acute diseases like allergies, ocular infections, etc., or chronic ones that can be manifested as a result of systemic disorders, like diabetes mellitus, thyroid, rheumatic disorders, and others. Chitosan (CS) and its derivatives have been widely investigated as nanocarriers in the delivery of drugs, genes, and many biological products. The biocompatibility and biodegradability of CS made it a good candidate for ocular delivery of many ingredients, including immunomodulating agents, antibiotics, ocular hypertension medications, etc. CS-based nanosystems have been successfully reported to modulate ocular diseases by penetrating biological ocular barriers and targeting and controlling drug release. This review provides guidance to drug delivery formulators on the most recently published strategies that can enhance drug permeation to the ocular tissues in CS-based nanosystems, thus improving therapeutic effects through enhancing drug bioavailability. This review will highlight the main ocular barriers to drug delivery observed in the nano-delivery system. In addition, the CS physicochemical properties that contribute to formulation aspects are discussed. It also categorized the permeation enhancement strategies that can be optimized in CS-based nanosystems into four aspects: CS-related physicochemical properties, formulation components, fabrication conditions, and adopting a novel delivery system like implants, inserts, etc. as described in the published literature within the last ten years. Finally, challenges encountered in CS-based nanosystems and future perspectives are mentioned.

Albumin as a functional carrier solubilizing and facilitating fusidic acid transmembrane delivery into Gram-negative bacteria

Reversing the bacterial resistance is of great significance and importance. Fusidic acid (FA) is commonly effective against Gram-positive bacterial infections, but most Gram-negative bacteria have intrinsic resistance to FA, primarily due to the strong cell membrane-FA interactions, which highly inhibit the intracellular transport of FA. Herein, we use albumin (bovine serum albumin, BSA) as a bifunctional carrier to solubilize FA and facilitate its transmembrane delivery into Gram-negative bacterial cells. The water solubility of FA is significantly enhanced from 11.87 to 442.20 μg/mL by 5 mg/mL BSA after forming FA-BSA complex. Furthermore, FA-BSA (200 μg/mL) causes 99.96 % viability loss to the model pathogen E. coli upon incubation for 3 h, while free FA or BSA alone shows little activity. Elongation of E. coli cells after treated by FA-BSA is demonstrated by SEM, and the transmembrane transport of FA-BSA is demonstrated by CLSM. Interestingly, increasing the BSA amount substantially reduce the antibacterial activity of FA-BSA, implying an albumin-based transmembrane delivery mechanism may exist. This is the first report regarding successfully reversing the intrinsic resistance of Gram-negative bacteria to FA in the form of FA-BSA. The ready availability of albumin and the simple preparation allows FA-BSA to have great potentials for clinical use.

Antibacterial and antioxidative hydrogel dressings based on tannic acid-gelatin/oxidized sodium alginate loaded with zinc oxide nanoparticles for promoting wound healing

Wound infection resulting in delayed wound healing and wound deterioration remains a clinical challenge. Recently, multifunctional hydrogel dressing was a promising strategy which has attracted wide attention in preventing wound infection and promoting wound healing. In this study, a hybrid hydrogel made of gelatin (GL), tannic acid (TA), oxidized sodium alginate (OSA), and zinc oxide nanoparticles (ZnO NPs) was prepared mainly by double network cross-linking approach, named tannic acid-gelatin/oxidized sodium alginate/zinc oxide (TA-GL/OSA/ZnO). The composite hydrogels exhibited improved mechanical properties, which provided by TA modified the structure of GL network, Schiff base reaction between GL and OSA, and the strengthening effect of ZnO NPs. Meanwhile, the composite hydrogel showed high antibacterial activity against Staphylococcus aureus (S. aureus) (97.8 % ± 0.9 %) and Escherichia coli (E. coli) (96.6 % ± 1.2 %), attributed to the synergistic effect of TA and ZnO NPs. Furthermore, benefiting from the good antioxidative properties of TA, the sustain-released Zn2+ with the good capability to kill bacteria, and promoting the regeneration of skin epithelial tissues in BALB/c mice constantly, the multifunctional hydrogel had a significant therapeutic effect on wound healing and broad application prospects.

A chitosan-based hydrogel loaded with fenofibrate for diabetic wound healing

Diabetic wounds represent a common chronic condition, posing significant challenges in the treatment process due to bacterial infections, increased generation of reactive oxygen species (ROS) and exacerbated inflammation. Fenofibrate (FEN) is a clinical medication used for lipid regulation. In this study, it was utilized for the first time as an effective component of wound dressings for treating diabetic ulcers, exploring its novel applications further. Therefore, we prepared a polyvinyl alcohol/chitosan/FEN (PCF) hydrogel using a freeze-thaw method and conducted physicochemical characterization of the PCF hydrogel to further elucidate its biological functions. In vitro studies demonstrated that the PCF hydrogel exhibits excellent biocompatibility along with significant antimicrobial, pro-angiogenic, ROS-scavenging, and anti-inflammatory properties. Subsequent animal experiments indicated that the PCF hydrogel has the ability to promote blood vessel formation and collagen deposition. Additionally, the PCF hydrogel showed a significant inhibitory effect on the inflammatory response, as evidenced by the reductions in the levels of tumor necrosis factor-alpha (TNF-α) and interleukin-6 (IL-6). These compelling findings accentuate the promising application of the PCF hydrogel in the treatment of diabetic wounds.

Chitosan-Based Hydrogels as Antibacterial/Antioxidant/Anti-Inflammation Multifunctional Dressings for Chronic Wound Healing

Due to repeated microbial infection, persistent inflammation, excessive oxidative stress, and cell dysfunction, chronic wounds are difficult to heal, posing a serious threat to public health. Therefore, developing multifunctional wound dressings that can regulate the complex microenvironment of chronic wounds and enhance cellular function holds great significance. Recently, chitosan has emerged as a promising biopolymer for wound healing due to its excellent biocompatibility, biodegradability, and versatile bioactivity. The aim of this review is to provide a comprehensive understanding of the mechanisms of delayed chronic wound healing and discuss the healing-promoting properties of chitosan and its derivatives, such as good biocompatibility, antibacterial activity, hemostatic capacity, and the ability to promote tissue regeneration. On this basis, the potential applications of chitosan-based hydrogels are summarized in chronic wound healing, including providing a suitable microenvironment, eliminating bacterial infections, promoting hemostasis, inhibiting chronic inflammation, alleviating oxidative stress, and promoting tissue regeneration. In addition, the concerns and perspectives for the clinical application of chitosan-based hydrogels are also discussed.

Preparation of an injectable zinc-containing hydrogel with double dynamic bond and its potential application in the treatment of periodontitis

Periodontal tissue regeneration continues to face significant clinical challenges. Periodontitis leads to alveolar bone resorption and even tooth loss due to persistent microbial infection and persistent inflammatory response. As a promising topical drug delivery system, the application of hydrogels in the controlled release of periodontal bioactive drugs has aroused great interest. Therefore, the design and preparation of an injectable hydrogel with self-repairing properties for periodontitis treatment is still in great demand. In this study, polysaccharide-based self-healing hydrogels with antimicrobial osteogenic properties were developed. Zinc ions are introduced into a dynamic cross-linking network formed by dynamic Schiff bases between carboxymethyl chitosan and oxidized hyaluronic acid via coordination bonds. The OC-Zn hydrogels exhibited good tissue adhesion, good fatigue resistance, excellent self-healing ability, low cytotoxicity, good broad-spectrum antimicrobial activity, and osteogenic activity. Therefore, the designed hydrogels allow the development of drug delivery systems as a potential treatment for periodontitis.

Mussel-inspired tissue adhesive composite hydrogel with photothermal and antioxidant properties prepared from pectin for burn wound healing

Biodegradable self-healing hydrogels with antibacterial property attracted growing attentions in biomedication as wound dressings since they can prevent bacterial infection and promote wound healing process. In this research, a biodegradable self-healing hydrogel with ROS scavenging performance and enhanced tissue adhesion was fabricated from dopamine grafted oxidized pectin (OPD) and naphthoate hydrazide terminated PEO (PEO NH). At the same time, Fe3+ ions were incorporated to endow the hydrogel with near-infrared (NIR) triggered photothermal property to obtain antibacterial activity. The composite hydrogel showed good hemostasis performance based on mussel inspired tissue adhesion with biocompatibility well preserved. As expected, the composition of FeCl3 improved conductivity and endowed photothermal property to the hydrogel. The in vivo wound repairing experiment revealed the 808 nm NIR light triggered photothermal behavior of the hydrogel reduced the inflammation response and promoted wound repairing rate. As a result, this composite FeCl3/hydrogel shows great potential to be an excellent wound dressing for the treatment of infection prong wounds with NIR triggers.

Multifunctional polysaccharide/metal/polyphenol double-crosslinked hydrogel for infected wound

Bacterial-infected wounds present a significant challenge in the medical field, posing a severe threat to public health. Traditional wound dressings have limited efficacy in treating bacterial-infected wounds, and antibiotics suffer from cytotoxicity and drug resistance. Consequently, an urgent requirement exists for developing multifunctional wound dressings capable of providing superior antimicrobial activity and expediting wound repair. In recent years, chitosan-based natural polysaccharide hydrogels have garnered attention for their biocompatibility, antimicrobial properties, and ability to aid in hemostasis. This study presents the development of a multi-functional, bi-dynamic network hydrogel for the treatment of wounds infected with bacteria. The hydrogel consists of a backbone of chitosan grafted with chlorogenic acid (CA-ECS), oxidized pullulan polysaccharides (OP), and zinc ions (Zn2+). The CA-ECS/OP/Zn2+ hydrogel displayed strong adhesion, good injectability, and high mechanical strength and was biodegradable and biocompatible. Furthermore, adding Zn2+ and CA enhanced the hydrogel's mechanical properties and antioxidant and antimicrobial activities. In a rat model of full-thickness skin wounds infected with S. aureus, the CA-ECS/OP/Zn2+ hydrogel demonstrated great anti-inflammatory, angiogenic, and folliculogenic properties, resulting in accelerated wound healing. The CA-ECS/OP/Zn2+ hydrogel has great potential for treating bacterial-infected wounds.

All-in-One Self-Powered Microneedle Device for Accelerating Infected Diabetic Wound Repair

Diabetic wound healing remains a significant clinical challenge due to the complex microenvironment and attenuated endogenous electric field. Herein, a novel all-in-one self-powered microneedle device (termed TZ@mMN-TENG) is developed by combining the multifunctional microneedle carried tannin@ZnO microparticles (TZ@mMN) with the self-powered triboelectric nanogenerator (TENG). In addition to the delivery of tannin and Zn2+, TZ@mMN also effectively conducts electrical stimulation (ES) to infected diabetic wounds. As a self-powered device, the TENG can convert biomechanical motion into exogenous ES to accelerate the infected diabetic wound healing. In vitro experiment demonstrated that TZ@mMN shows excellent conductive, high antioxidant ability, and effective antibacterial properties against both Staphylococcus aureus and Escherichia coli (>99% antibacterial rates). Besides, the TZ@mMN-TENG can effectively promote cell proliferation and migration. In the diabetic rat full-thickness skin wound model infected with Staphylococcus aureus, the TZ@mMN-TENG can eliminate bacteria, accelerate epidermal growth (regenerative epidermis: ≈303.3 ± 19.1 µm), enhance collagen deposition, inhibit inflammation (lower TNF-α and IL-6 expression), and promote angiogenesis (higher CD31 and VEGF expression) to accelerate infected wound repair. Overall, the TZ@mMN-TENG provides a promising strategy for clinical application in diabetic wound repair.

Polyhydroxy structure orchestrates the intrinsic antibacterial property of acrylamide hydrogel as a versatile wound-healing dressing

Hydrogel is considered as a promising candidate for wound dressing due to its tissue-like flexibility, good mechanical properties and biocompatibility. However, traditional hydrogel dressings often fail to fulfill satisfied mechanical, antibacterial, and biocompatibility properties simultaneously, due to the insufficient intrinsic bactericidal efficacy and the addition of external antimicrobial agents. In this paper, hydroxyl-contained acrylamide monomers, N-Methylolacrylamide (NMA) and N-[Tris (hydroxymethyl)methyl] acrylamide (THMA), are employed to prepare a series of polyacrylamide hydrogel dressings xNMA-yTHMA, where x and y represent the mass fractions of NMA and THMA in the hydrogels. We have elucidated that the abundance of hydroxyl groups determines the antibacterial effect of the hydrogels. Particularly, hydrogel 35NMA-5THMA exhibits excellent mechanical properties, with high tensile strength of 259 kPa and large tensile strain of 1737%. Furthermore, the hydrogel dressing 35NMA-5THMA demonstrates remarkable inherent antibacterial without exogenous antimicrobial agents owing to the existence of abundant hydroxyl groups. Besides, hydrogel dressing 35NMA-5THMA possesses excellent biocompatibility, in view of marginal cytotoxicity, low hemolysis ratio, and negligible inflammatory response and organ toxicity to mice during treatment. Encouragingly, hydrogel 35NMA-5THMA drastically promote the healing of bacteria-infected wound in mice. This study has revealed the importance of polyhydroxyl in the antibacterial efficiency of hydrogels and provided a simplified strategy to design wound healing dressings with translational potential.

A whole-course-repair system based on ROS/glucose stimuli-responsive EGCG release and tunable mechanical property for efficient treatment of chronic periodontitis in diabetic rats

Elevated glucose levels, multiple pro-inflammatory cytokines and the generation of excessive reactive oxygen species (ROS) are pivotal characteristics within the microenvironments of chronic periodontitis with diabetes mellitus (CPDM). Control of inflammation and modulation of immune system are required in the initial phase of CPDM treatment, while late severe periodontitis requires a suitable scaffold to promote osteogenesis, rebuild periodontal tissue and reduce alveolar bone resorption. Herein, a whole-course-repair system is introduced by an injectable hydrogel using phenylboronic acid functionalized oxidized sodium alginate (OSA-PBA) and carboxymethyl chitosan (CMC). Epigallocatechin-3-gallate (EGCG) was loaded to simultaneously adjust the mechanical property of the OSA-PBA/CMC + EGCG hydrogel (OPCE). This hydrogel has distinctive adaptability, injectability, and ROS/glucose-triggered release of EGCG, making it an ideal drug delivery carrier. As expected, OPCE hydrogel shows favourable antioxidant and anti-inflammatory properties, along with a regulatory influence on the phenotypic transition of macrophages, providing a favourable immune microenvironment. Apart from that, it provides a favourable mechanical support for osteoblast/osteoclast differentiation regulation at the late proliferation stage of periodontal regeneration. The practical therapeutic effects of OPCE hydrogels were also confirmed when applied for treating periodontitis in diabetic rats. In summary, OPCE hydrogel may be a promising whole-course-repair system for the treatment of CPDM.

Cellulose nanofibers embedded chitosan/tannin hydrogel with high antibacterial activity and hemostatic ability for drug-resistant bacterial infected wound healing

Millions of patients annually suffer life-threatening illnesses caused by bacterial infections of skin wounds. However, the treatment of wounds infected with bacteria is a thorny issue in clinical medicine, especially with drug-resistant bacteria infections. Therefore, there is an increasing interest in developing wound dressings that can efficiently fight against drug-resistant bacterial infections and promote wound healing. In this work, an anti-drug-resistant bacterial chitosan/cellulose nanofiber/tannic acid (CS/CNF/TA) hydrogel with excellent wound management ability was developed by electrospinning and fiber breakage-recombination. The hydrogel exhibited an outstanding antibacterial property exceeding 99.9 %, even for drug-resistant bacteria. This hydrogel could adhere to the tissue surface due to its abundant catechol groups, which avoided the shedding of hydrogel during the movement. Besides, it exhibited extraordinary hemostatic ability during the bleeding phase of the wound and then regulated the wound microenvironment by absorbing water and moisturizing. Moreover, the CS/CNF/TA also promoted the regrowth of vessels and follicles, accelerating the healing of infected wound tissue, with a healing rate exceeding 95 % within a 14-day timeframe. Therefore, the CS/CNF/TA hydrogel opens a new approach for the healing of drug-resistant bacterial infected wounds.

Hyaluronic acid-decorated curcumin-based coordination nanomedicine for enhancing the infected diabetic wound healing

Persistent over-oxidation, inflammation and bacterial infection are the primary reasons for impaired wound repairing in diabetic patients. Therefore, crucial strategies to promote diabetic wound repairing involve suppressing the inflammatory response, inhibiting bacterial growth and decreasing reactive oxygen species (ROS) within the wound. In this work, we develop a multifunctional nanomedicine (HA@Cur/Cu) designed to facilitate the repairing process of diabetic wound. The findings demonstrated that the synthesized infinite coordination polymers (ICPs) was effective in enhancing the bioavailability of curcumin and improving the controlled drug release at the site of inflammation. Furthermore, in vitro and in vivo evaluation validate the capacity of HA@Cur/Cu to inhibit bacterial growth and remove excess ROS and inflammatory mediators, thereby significantly promoting the healing of diabetic wound in mice. These compelling findings strongly demonstrate the enormous promise of this multifunctional nanomedicine for the treatment of diabetic wound.

Ganoderma lucidum polysaccharide hydrogel accelerates diabetic wound healing by regulating macrophage polarization

Impaired macrophage polarization or the high levels of reactive oxygen species (ROS) produced by high glucose conditions and bacterial infection are the primary factors that make healing diabetic wounds difficult. Here, we prepared an OGLP-CMC/SA hydrogel with a double network structure that was synthesized with oxidized Ganoderma lucidum polysaccharide (OGLP), sodium alginate (SA) and carboxymethyl chitosan (CMC) as the matrix. The results showed that the OGLP-CMC/SA hydrogel had good mechanical properties, tissue adhesion, oxidation resistance and biocompatibility. Moreover, the hydrogel could effectively improve the proliferation and migration of fibroblasts, also can enhance antibacterial properties. We found that the OGLP-CMC/SA hydrogel can promote the polarization of M1 macrophages towards the M2 and decrease intracellular ROS levels, effectively reduce the inflammatory response, and promote epidermal growth, the development of skin appendages and collagen deposition in wounds, which hasten diabetic wound healing. Therefore, using this versatile biologically active new hydrogel network constructed with OGLP provides a promising therapeutic strategy for chronic diabetic wound repair.

Synergistic bactericidal combinations between gentamicin and chitosan capped ZnO nanoparticles: A promising strategy for repositioning this first-line antibiotic

Gentamicin (GEN), a widely used broad-spectrum antibiotic, faces challenges amid the global emergency of antimicrobial resistance. This study aimed to explore the synergistic effects of zinc oxide nanoparticles (ZnO NPs) in combination with GEN on the bactericidal activity against various bacterial strains. Results showed ZnO NPs with MICs ranging from 0.002 to 1.5 μg/mL, while the precursor salt displayed a MIC range of 48.75-1560 μg/mL. Chitosan (CS)-capped ZnO NPs exhibited even lower MICs than their uncapped counterparts, with the CS-capped synthesized ZnO NPs demonstrating the lowest values. Minimal bactericidal concentrations (MBC) aligned with MIC trends. Combinations of CS-capped synthesized ZnO NPs and GEN proved highly effective, inhibiting bacterial growth at significantly lower concentrations than GEN or ZnO NPs alone. This phenomenon may be attributed to the conformation of CS on the ZnO NPs' surface, enhancing the positive particle surface charge. This possibly facilitates a more effective interaction between ZnO NPs and microorganisms, leading to increased accumulation of zinc and GEN within bacterial cells and an overproduction of reactive oxygen species (ROS). It's crucial to note that, while this study did not specifically involve resistant strains, its primary focus remains on enhancing the overall antimicrobial activity of gentamicin. The research aims to contribute to addressing the global challenge of antimicrobial resistance, recognizing the urgent need for effective strategies to combat this critical issue. The findings, particularly the observed synergy between ZnO NPs and GEN, hold significant implications for repositioning the first-line antibiotic GEN.

Reversing the Natural Drug Resistance of Gram-Negative Bacteria to Fusidic Acid via Forming Drug-Phospholipid Complex

Drug resistance substantially compromises antibiotic therapy and poses a serious threat to public health. Fusidic acid (FA) is commonly used to treat staphylococcal infections, such as pneumonia, osteomyelitis and skin infections. However, Gram-negative bacteria have natural resistance to FA, which is almost restrained in cell membranes due to the strong interactions between FA and phospholipids. Herein, we aim to utilize the strong FA-phospholipid interaction to pre-form a complex of FA with the exogenous phospholipid. The FA, in the form of an FA-phospholipid complex (FA-PC), no longer interacts with the endogenous membrane phospholipids and thus can be delivered into bacteria cells successfully. We found that the water solubility of FA (5 µg/mL) was improved to 133 µg/mL by forming the FA-PC (molar ratio 1:1). Furthermore, upon incubation for 6 h, the FA-PC (20 µg/mL) caused a 99.9% viability loss of E. coli and 99.1% loss of P. aeruginosa, while free FA did not work. The morphology of the elongated bacteria cells after treatment with the FA-PC was demonstrated by SEM. The successful intracellular delivery was shown by confocal laser scanning microscopy in the form of coumarin 6-PC (C6-PC), where C6 served as a fluorescent probe. Interestingly, the antibacterial effect of the FA-PC was significantly compromised by adding extra phospholipid in the medium, indicating that there may be a phospholipid-based transmembrane transport mechanism underlying the intracellular delivery of the FA-PC. This is the first report regarding FA-PC formation and its successful reversing of Gram-negative bacteria resistance to FA, and it provides a platform to reverse transmembrane delivery-related drug resistance. The ready availability of phospholipid and the simple preparation allow it to have great potential for clinical use.

Drug-free and multifunctional sodium bicarbonate/hyaluronic acid hybrid dressing for synergistic healing of infected wounds

Skin wounds are susceptible to microbial infections which commonly lead to the delayed wound healing. Rapid clearance of pathogens from the wound is of great significance and importance for efficient healing of the infected wounds. Herein, we report a multifunctional hybrid dressing, which simply combines sodium bicarbonate (NaHCO3) and hyaluronic acid (HA) for the synergistic wound healing. Addition of NaHCO3 allows the hybrid dressing to have the great antibacterial and antioxidant activity, while maintaining the intrinsic skin repair function of HA. As a result, NaHCO3/HA hybrid dressing showed the great antibacterial activity against both Gram-positive (S. aureus) and Gram-negative (E. coli) pathogens, the ability to improve the fibroblasts proliferation and migration, the cell-protection capacity under H2O2-induced oxidative stress, and most importantly, the great healing efficacy for the mice wound infected by S. aureus. We further found that the epidermal regeneration, the collagen deposition and the angiogenesis were enhanced by NaHCO3/HA hybrid dressing. All these effects were NaHCO3 concentration-dependent. Since the NaHCO3/HA hybrid dressing is drug-free, easily fabricated, biocompatible, and efficient for wound healing, it may have great potentials for clinical management of infected wounds.

Microenvironmental dynamics of diabetic wounds and insights for hydrogel-based therapeutics

The rising prevalence of diabetes has underscored concerns surrounding diabetic wounds and their potential to induce disability. The intricate healing mechanisms of diabetic wounds are multifaceted, influenced by ambient microenvironment, including prolonged hyperglycemia, severe infection, inflammation, elevated levels of reactive oxygen species (ROS), ischemia, impaired vascularization, and altered wound physicochemical properties. In recent years, hydrogels have emerged as promising candidates for diabetic wound treatment owing to their exceptional biocompatibility and resemblance to the extracellular matrix (ECM) through a three-dimensional (3D) porous network. This review will first summarize the microenvironment alterations occurring in the diabetic wounds, aiming to provide a comprehensive understanding of its pathogenesis, then a comprehensive classification of recently developed hydrogels will be presented, encompassing properties such as hypoglycemic effects, anti-inflammatory capabilities, antibacterial attributes, ROS scavenging abilities, promotion of angiogenesis, pH responsiveness, and more. The primary objective is to offer a valuable reference for repairing diabetic wounds based on their unique microenvironment. Moreover, this paper outlines potential avenues for future advancements in hydrogel dressings to facilitate and expedite the healing process of diabetic wounds.

Recent advances in biopolymer-based hydrogels and their potential biomedical applications

Hydrogels are three-dimensional networks of polymer chains containing large amounts of water in their structure. Hydrogels have received significant attention in biomedical applications owing to their attractive physicochemical properties, including flexibility, softness, biodegradability, and biocompatibility. Different natural and synthetic polymers have been intensely explored in developing hydrogels for the desired applications. Biopolymers-based hydrogels have advantages over synthetic polymers regarding improved cellular activity and weak immune response. These properties can be further improved by grafting with other polymers or adding nanomaterials, and they structurally mimic the living tissue environments, which opens their broad applicability. The hydrogels can be physically or chemically cross-linked depending on the structure. The use of different biopolymers-based hydrogels in biomedical applications has been reviewed and discussed earlier. However, no report is still available to comprehensively introduce the synthesis, advantages, disadvantages, and biomedical applications of biopolymers-based hydrogels from the material point of view. Herein, we systematically overview different synthesis methods of hydrogels and provide a holistic approach to biopolymers-based hydrogels for biomedical applications, especially in bone regeneration, wound healing, drug delivery, bioimaging, and therapy. The current challenges and prospects of biopolymers-based hydrogels are highlighted rationally, giving an insight into the progress of these hydrogels and their practical applications.

Prevention of bacterial biofilm formation on orthodontic brackets by non-crosslinked chitosan coating

During orthodontic treatment, the patients are susceptible to dental caries as a result of the bacterial adhesion and biofilm formation around the orthodontic brackets. Prevention of the caries-related biofilm formation is of significance for maintaining both aesthetics and health of the teeth. Herein, the brackets were functionalized with antibacterial activity via coating a layer of non-crosslinked chitosan (CS). We firstly demonstrated the ability of free CS scaffolds (not coated on brackets) to inhibit the formation of Streptococcus mutans biofilms (inhibition rate 94.3 % for CS-0.3 mg) and to eradicate the mature biofilms (biofilm loss rate 99.8 % for CS-1.2 mg). Further, the inhibition of S. mutans biofilm formation on brackets by CS coating was investigated for the first time. As a result, the CS-coated brackets (Br-CS) kept the great biofilm inhibition capacity of free CS scaffolds. In detail, the Br-CS, prepared by immersing brackets in CS solutions (containing 1.0, 2.5, 5.0 and 10 mg/mL CS) and freeze-drying, showed the biofilm inhibition rate of 48.5 %, 88.6 %, 96.4 % and 99.6 %, respectively. In conclusion, coating orthodontic brackets with the non-crosslinked CS is a potential approach for inhibiting biofilm formation and protecting patients from dental caries.

Bioinspired 3D-printed scaffold embedding DDAB-nano ZnO/nanofibrous microspheres for regenerative diabetic wound healing

There is a constant demand for novel materials/biomedical devices to accelerate the healing of hard-to-heal wounds. Herein, an innovative 3D-printed bioinspired construct was developed as an antibacterial/regenerative scaffold for diabetic wound healing. Hyaluronic/chitosan (HA/CS) ink was used to fabricate a bilayer scaffold comprising a dense plain hydrogel layer topping an antibacterial/regenerative nanofibrous layer obtained by incorporating the hydrogel with polylactic acid nanofibrous microspheres (MS). These were embedded with nano ZnO (ZNP) or didecyldimethylammonium bromide (DDAB)-treated ZNP (D-ZNP) to generate the antibacterial/healing nano/micro hybrid biomaterials, Z-MS@scaffold and DZ-MS@scaffold. Plain and composite scaffolds incorporating blank MS (blank MS@scaffold) or MS-free ZNP@scaffold and D-ZNP@scaffold were used for comparison. 3D printed bilayer constructs with customizable porosity were obtained as verified by SEM. The DZ-MS@scaffold exhibited the largest total pore area as well as the highest water-uptake capacity andin vitroantibacterial activity. Treatment ofStaphylococcus aureus-infected full thickness diabetic wounds in rats indicated superiority of DZ-MS@scaffold as evidenced by multiple assessments. The scaffold afforded 95% wound-closure, infection suppression, effective regulation of healing-associated biomarkers as well as regeneration of skin structure in 14 d. On the other hand, healing of non-diabetic acute wounds was effectively accelerated by the simpler less porous Z-MS@scaffold. Information is provided for the first-time on the 3D printing of nanofibrous scaffolds using non-electrospun injectable bioactive nano/micro particulate constructs, an innovative ZNP-functionalized 3D-printed formulation and the distinct bioactivity of D-ZNP as a powerful antibacterial/wound healing promotor. In addition, findings underscored the crucial role of nanofibrous-MS carrier in enhancing the physicochemical, antibacterial, and wound regenerative properties of DDAB-nano ZnO. In conclusion, innovative 3D-printed DZ-MS@scaffold merging the MS-boosted multiple functionalities of ZNP and DDAB, the structural characteristics of nanofibrous MS in addition to those of the 3D-printed bilayer scaffold, provide a versatile bioactive material platform for diabetic wound healing and other biomedical applications.

Bioinspired poly(aspartic acid) based hydrogel with ROS scavenging ability as mEGF carrier for wound repairing applications

Poly(amino acid) based self-healing hydrogels have important application in biomedications. In this research, the catechol pendant groups were imported to poly(aspartic acid) based self-healing hydrogel to improved skin adhesion and ROS scavenging performance. The poly(succinimide) (PSI) was reacted with 3,4-dihydroxyphenylalanine (DA) and then hydraziolyzed to import catechol group and hydrazide group respectively, which are responsible for mussel inspired tissue adhesion and dynamic coupling reactivity. The dopamine modified poly(aspartic hydrazide) (PDAH) was reacted with PEO90 dialdehyde (PEO90 DA) to prepare hydrogels, and the resultant hydrogel showed good biocompatibility both in vitro and in vivo. The skin adhesion strength of the mussel inspired hydrogel increased notably with enhanced radical scavenging efficiency fit for in vivo wound repairing applications. The PDAH/PEO90 DA hydrogel also showed sustained albumin release profile and the in vivo wound repairing experiment proved the mouse Epidermal Growth Factor (mEGF) loaded hydrogel as wound dressing material accelerated the wound repairing rate.

Applications of drug delivery systems, organic, and inorganic nanomaterials in wound healing

The skin is known to be the largest organ in the human body, while also being exposed to environmental elements. This indicates that skin is highly susceptible to physical infliction, as well as damage resulting from medical conditions such as obesity and diabetes. The wound management costs in hospitals and clinics are expected to rise globally over the coming years, which provides pressure for more wound healing aids readily available in the market. Recently, nanomaterials have been gaining traction for their potential applications in various fields, including wound healing. Here, we discuss various inorganic nanoparticles such as silver, titanium dioxide, copper oxide, cerium oxide, MXenes, PLGA, PEG, and silica nanoparticles with their respective roles in improving wound healing progression. In addition, organic nanomaterials for wound healing such as collagen, chitosan, curcumin, dendrimers, graphene and its derivative graphene oxide were also further discussed. Various forms of nanoparticle drug delivery systems like nanohydrogels, nanoliposomes, nanofilms, and nanoemulsions were discussed in their function to deliver therapeutic agents to wound sites in a controlled manner.