Influence of Ti–O–Si hetero-linkages in the photocatalytic degradation of Rhodamine B

Au9 nanocluster adsorption and agglomeration control through sulfur modification of mesoporous TiO2

In the present work phenyl phosphine-protected Au9 nanoclusters were deposited onto (3-mercaptopropyl) trimethoxysilane (MPTMS) modified and unmodified mesoporous screen printed TiO2. The removal of the cluster ligands by annealing was applied to enhance the interaction between Au cluster cores and semiconductor surfaces in the creation of efficient photocatalytic systems. The heat treatment could lead to undesired agglomeration of Au clusters, affecting their unique properties as size specific clusters. To address this challenge, the semiconductor surfaces were modified by MPTMS. Characterization techniques confirm the effectiveness of the modification processes, and XPS demonstrates that S functionalized MTiO2 is more efficient than MTiO2 in increasing Au9 NCs adsorption by a factor of 10 and preventing Au cluster agglomeration even after annealing. Overall, this work contributes valuable insights into photocatalytic systems through controlled modification of semiconductor surfaces and Au nanocluster deposition.

Preparation of Titania-Silica Composite Aerogel at Atmospheric Pressure and Its Catalytic Performance in the Synthesis of Poly (Butylene Succinate)

Titanates are widely used in the synthesis of polyesters, such as Poly (butylene succinate) (PBS), due to their excellent catalytic activity for polycondensation. However, the hydrolysis sensitivity of titanate and side reactions at high temperatures restrict the further improvement of the molecular weight of polyesters and lead to the high content of end carboxyl group content in the products. In this work, we prepared titania-silica composite aerogels with resistance to hydrolysis and large specific surface area, which were further explored as an efficient catalyst for polycondensation reactions. A series of titania-silica composite aerogel catalysts for PBS polycondensation were successfully prepared by the sol-gel method. The influence of a Ti/Si ratio on the surface morphology and structure of the aerogels was examined. Titania-silica composite aerogel exhibits the surface characteristics of high specific surface area and high Lewis acid content. The specific surface area of titania-silica composite aerogels can reach 524.59 m²/g, and the Lewis acid content on the surface can reach 370.29 μmol/g. Furthermore, the catalytic performance for the polycondensation reaction of PBS was investigated. The intrinsic viscosity of PBS synthesized by catalysis with the composite catalyst with a Ti/Si ratio of 9/1 reaches 1.74 dL/g, with the M_n of 7.72 × 10⁴ g/mol. The hydrolysis resistance stability of the titania-silica composite aerogel is greatly improved compared with traditional tetrabutyl titanate (TBT), and the end carboxyl group content of PBS is effectively reduced to lower than 30 mol/ton.

Pushing detectability and sensitivity for subtle force to new limits with shrinkable nanochannel structured aerogel

There is an urgent need for developing electromechanical sensor with both ultralow detection limits and ultrahigh sensitivity to promote the progress of intelligent technology. Here we propose a strategy for fabricating a soft polysiloxane crosslinked MXene aerogel with multilevel nanochannels inside its cellular walls for ultrasensitive pressure detection. The easily shrinkable nanochannels and optimized material synergism endow the piezoresistive aerogel with an ultralow Young's modulus (140 Pa), numerous variable conductive pathways, and mechanical robustness. This aerogel can detect extremely subtle pressure signals of 0.0063 Pa, deliver a high pressure sensitivity over 1900 kPa^-1, and exhibit extraordinarily sensing robustness. These sensing properties make the MXene aerogel feasible for monitoring ultra-weak force signals arising from a human's deep-lying internal jugular venous pulses in a non-invasive manner, detecting the dynamic impacts associated with the landing and take-off of a mosquito, and performing static pressure mapping of a hair.

A Kinetic Study of Photocatalytic Degradation of Phenol over Titania–Silica Mixed Oxide Materials under UV Illumination

A set of titania–silica mixed oxide materials were prepared by a cosolvent-induced gelation method using ethanol and toluene as solvent and cosolvent, respectively. These materials were extensively characterized by utilizing several characterization techniques and assessed for phenol degradation under UV illumination. The degradation of phenol follows first-order kinetics, and fragmented products formed during the phenol degradation were qualitatively identified by using high performance liquid Chromatographic (HPLC) and atomic pressure chemical ionization mass spectroscopic (APCI-MS) techniques. The complete mineralization of phenol was further evidenced by the measurement of the total organic contents that remained in the solution after irradiation. The pore diameter of the materials was found to be the key factor for phenol degradation, whereas surface area and pore volume play a role among the mixed oxide materials. In addition, in the mixed oxide system there was an inverse correlation obtained with the particle size of the materials and the degradation efficiency. The smaller particle size of titania in the mixed oxide material was found to be a requirement for an effective degradation of phenol.

Quantum dot-sensitized O-linked heptazine polymer photocatalyst for the metal-free visible light hydrogen generation

Metal-free organic polymer photocatalysts have attracted dramatic attention in the field of visible light-induced hydrogen evolution reaction (HER). Herein, we showed a polymeric O-linked heptazine polymer (OLHP) decorated with S, N co-doped graphene quantum dots (S,N-GQDs) as a photosensitizer to generate hydrogen upon quantum dot sensitization. Both of these heptazine-based systems show effective photosensitization with strong π–π interactions and enhanced photocatalytic H₂ generation (24 times) as metal-free systems. Electrochemical impedance and optical measurements show effective charge transfer kinetics with decreased charge recombination, which is responsible for the enhanced photocatalytic activity. As a result, a significant high apparent quantum yield (AQY) with highest value of 10.2% was obtained for our photocatalyst OLHP/S,N-GQD10.

A polymeric O-linked heptazine polymer (OLHP) decorated with S, N co-doped graphene quantum dots (S,N-GQDs) as a photosensitizer to utilize visible light (λ > 420 nm) for hydrogen generation.

Photocatalytic Performance of SiO2/CNOs/TiO2 to Accelerate the Degradation of Rhodamine B under Visible Light

A silicon dioxide/carbon nano onions/titanium dioxide (SiO₂/CNOs/TiO₂) composite was synthesized by a simple sol-gel method and characterized by the methods of X-ray diffraction (XRD), scanning electronic microscope (SEM), X-ray photoelectron spectroscopy (XPS), Brunauer–Emmett–Teller (BET), Fourier transform infrared (FTIR), thermogravimetric analysis (TG), differential scanning calorimeter (DSC) and UV-Vis diffuse reflectance spectra (UV-Vis DRS). In this work, the photocatalytic activity of the SiO₂/CNOs/TiO₂ photocatalyst was assessed by testing the degradation rate of Rhodamine B (RhB) under visible light. The results indicated that the samples exhibited the best photocatalytic activity when the composite consisted of 3% CNOs and the optimum dosage of SiO₂/CNOs/TiO₂(3%) was 1.5 g/L as evidenced by the highest RhB degradation rate (96%). The SiO₂/CNOs/TiO₂ composite greatly improved the quantum efficiency of TiO₂. This work provides a new option for the modification of subsequent nanocomposite oxide nanoparticles.

Preparation of SiO2@TiO2:Eu3+@TiO2 core double-shell microspheres for photodegradation of polyacrylamide

Recently, polyacrylamide (PAM) has been widely used in polymer flooding technology to enhance oil recovery and oil production. However, the difficulty in removing hydrolysed PAM (HPAM) from wastewater still seriously blocks the further application of polymer flooding in the oilfields. Herein, we demonstrate the preparation of SiO₂@TiO₂:Eu³⁺@TiO₂ core double-shell microspheres (STT) through a two-step solvothermal and sol–gel coating strategy. The as-prepared STT exhibits an ideal photocatalytic activity for the photodegradation of HPAM. More importantly, by using STT as the model, the correlation between fluorescence intensity and photocatalytic activity of the photocatalysts is investigated. The results suggest their oppositional relationship. Since many kinds of photocatalysts are utilized in the degradation of organic pollutants, it is believed that our work will not only promote the development of photocatalysis in the field of oil extraction, but also offer a convenient method for evaluating the photocatalytic activity of the photocatalysts.

SiO₂@TiO₂:Eu³⁺@TiO₂ core double-shell microspheres with an ideal photocatalytic activity are designed and prepared for photodegradation of HPAM.

Glass fiber supported BiOI thin-film fixed-bed photocatalytic reactor for water decontamination under solar light irradiation

BiOI powder has been proved to be an efficient photocatalyst, but the difficulty in removing it from water after reaction limits its application in real water treatment. To solve this problem, a thin-film fixed-bed reactor (TFFBR) was set-up by developing a BiOI thin film on glass fiber cloth (GFC). The composition and structure of the as-prepared films were characterized with X-ray diffraction, X-ray photoelectron spectroscopy, field emission microscopy, transmission electron microscopy and Fourier transform infrared spectroscopy. The BiOI thin film was made by painting a silica sol containing BiOI on GFC, which could be tailored to desired sizes to accommodate the TFFBR. The mass of BiOI on the GFC increased with the number of iterations of the painting process. SiO₂ sol glued the BiOI particles tightly onto the GFC, making the thin film strong enough to resist fluid flushing in the TFFBR. The photocatalytic activity of the BiOI thin film was investigated by degrading bisphenol A (BPA) under simulated sunlight. Ninety eight percent of BPA (20 mg/L in 2 L) was degraded by the BiOI thin film sample of seven layers (GFC-7) on the TFFBR within 8 hr irradiation. The GFC-7 displayed good photocatalytic ability toward artificial sewage containing BPA in a wide pH range (5-9), and also demonstrated excellent durability and reusability. The working conditions were optimized and it was found that the thickness of the fluid film and residence time over the thin film were key factors affecting the photocatalytic efficiency.

Core-shell structured titanium dioxide nanomaterials for solar energy utilization

Because of its unmatched resource potential, solar energy utilization currently is one of the hottest research areas. Much effort has been devoted to developing advanced materials for converting solar energy into electricity, solar fuels, active chemicals, or heat. Among them, TiO2 nanomaterials have attracted much attention due to their unique properties such as low cost, nontoxicity, good stability and excellent optical and electrical properties. Great progress has been made, but research opportunities are still present for creating new nanostructured TiO2 materials. Core-shell structured nanomaterials are of great interest as they provide a platform to integrate multiple components into a functional system, showing improved or new physical and chemical properties, which are unavailable from the isolated components. Consequently, significant effort is underway to design, fabricate and evaluate core-shell structured TiO2 nanomaterials for solar energy utilization to overcome the remaining challenges, for example, insufficient light absorption and low quantum efficiency. This review strives to provide a comprehensive overview of major advances in the synthesis of core-shell structured TiO2 nanomaterials for solar energy utilization. This review starts from the general protocols to construct core-shell structured TiO2 nanomaterials, and then discusses their applications in photocatalysis, water splitting, photocatalytic CO2 reduction, solar cells and photothermal conversion. Finally, we conclude with an outlook section to offer some insights on the future directions and prospects of core-shell structured TiO2 nanomaterials and solar energy conversion.

Conservation of Monuments by a Three-Layered Compatible Treatment of TEOS-Nano-Calcium Oxalate Consolidant and TEOS-PDMS-TiO₂ Hydrophobic/Photoactive Hybrid Nanomaterials

In the conservation of monuments, research on innovative nanocomposites with strengthening, hydrophobic and self-cleaning properties have attracted the interest of the scientific community and promising results have been obtained as a result. In this study, stemming from the need for the compatibility of treatments in terms of nanocomposite/substrate, a three-layered compatible treatment providing strengthening, hydrophobic, and self-cleaning properties is proposed. This conservation approach was implemented treating lithotypes and mortars of different porosity and petrographic characteristics with a three-layered treatment comprising: (a) a consolidant, tetraethoxysilane (TEOS)-nano-Calcium Oxalate; (b) a hydrophobic layer of TEOS-polydimethylsiloxane (PDMS); and (c) a self-cleaning layer of TiO₂ nanoparticles from titanium tetra-isopropoxide with oxalic acid as hole-scavenger. After the three-layered treatment, the surface hydrophobicity was improved due to PDMS and nano-TiO₂ in the interface substrate/atmosphere, as proven by the homogeneity and the Si⁻O⁻Ti hetero-linkages of the blend protective/self-cleaning layers observed by Scanning Electron Microscope (SEM), Transmission Electron Microscope (TEM) and Fourier-Transform Infrared Spectroscopy (FTIR). The aesthetic, microstructural, mechanical and permeabile compatibility of the majority of treated substrates ranged within acceptability limits. The improved photocatalytic activity, as proven by the total discoloration of methylene blue in the majority of cases, was attributed to the anchorage of TiO₂, through the Si⁻O⁻Ti bonds to SiO₂, in the interface with the atmosphere, thus enhancing photoactivation.

Understanding the remarkable luminescence enhancement via SiO2 coating on TiO2:Eu3+ nanofibers

Red luminescence is enhanced by coating an SiO₂ layer on TiO₂:Eu³⁺ nanofibers, and the luminescence enhancement mechanism is discussed.

Layer-by-Layer Assembly of Multifunctional Flame Retardant Based on Brucite, 3-Aminopropyltriethoxysilane, and Alginate and Its Applications in Ethylene-Vinyl Acetate Resin

An efficient and multifunctional brucite/3-aminopropyltriethoxysilane (APTES)/nickel alginate/APTES (B/A/Nia/A) hybrid flame retardant was fabricated via the layer-by-layer assembly technique with brucite, silane coupling agents, nickel chloride, and sodium alginate. The morphology, chemical composition, and structure of the hybrid flame retardant were characterized. The results confirmed the multilayer structure and indicated that the assembled driving forces were electrostatic interactions, dehydration condensation, hydrogen bonds, and coordination bonds. When used in ethylene-vinyl acetate (EVA) resin, the multifunctional flame retardant had better performance than brucite in improving the flame retardancy, smoke suppression, and mechanical properties. With 130 phr loading, the multifunctional flame retardant achieved a limiting oxygen index value of 32.3% and a UL 94 V-0 rating, whereas the brucite achieved only 31.1% and a V-2 rating, respectively. The peak heat release rate and total heat released decreased by 41.5% and 8.9%, respectively. The multifunctional flame retardant had an excellent performance in reducing the smoke, CO, and CO2 production rates. These improvements could be attributed to the catalyzing carbonization of nickel compounds and the formation of more protective char layers. Moreover, the elongation at break increased by 97.5%, which benefited from the improved compatibility and the sacrificial bonds in the nickel alginate. The mechanism of flame retardant, smoke suppression, and toughening is proposed.

Efficient photocatalytic hydrogen evolution system by assembling earth abundant NixOy nanoclusters in cubic MCM-48 mesoporous materials

A MCM-48 mesoporous support containing NiO and Ni₂O₃ nanoclusters exhibit high activity for photocatalytic hydrogen production in comparison to NiO.

Titania-Silica Materials for Enhanced Photocatalysis

Mesoporous titania-organosilica nanoparticles comprised of anatase nanocrystals crosslinked with organosilica moieties have been prepared by direct co-condensation of a titania precursor, tetrabuthylortotitanate (TBOT), with two organosilica precursors, 1,4-bis(triethoxysilyl) benzene (BTEB) and 1,2-bis(triethoxysilyl) ethane (BTEE), in mild conditions and in the absence of surfactant. These hybrid materials show both high surface areas (200-360 m(2)  g(-1) ) and pore volumes (0.3 cm(3)  g(-1) ) even after calcination, and excellent photoactivity in the degradation of rhodamine 6G and in the partial oxidation of propene under UV irradiation, especially after the calcination of the samples. During calcination, there is a change in the Ti(IV) coordination and an increase in the content of SiOTi moieties in comparison with the uncalcined materials, which seems to be responsible for the enhanced photocatalytic activity of hybrid titania-silica materials as compared to both uncalcined samples and the control TiO2 .

Modulation of pore sizes of titanium dioxide photocatalysts by a facile template free hydrothermal synthesis method: implications for photocatalytic degradation of rhodamine B

Mesoporous TiO2 photocatalysts were prepared in ethanol media by using relatively green, template free sol-gel technique. A mild hydrothermal treatment procedure was employed to tune the pore sizes of the materials. Comprehensive techniques that include powder X-ray diffraction, diffuse reflectance spectroscopy, specific surface area analysis, electron microscopy, FT-IR, TGA, and ζ-potential measurements were used to characterize the titania materials. Porosity (pore size and pore volume) of the materials were found to be key factors for the variation in the rate of photocatalytic degradation of rhodamine B; in addition to specific surface area, and surface hydroxyl groups. An increase in porosity permits effective transport of the dye molecules resulting in an increase in the rate of the degradation in materials having larger pores. A detailed electrospray ionization-mass spectrometric (ESI-MS) study was carried out for selected materials to identify photodegraded intermediates and products formed during the degradation of rhodamine B. In addition, experiments were also carried out to understand the role of reactive oxygen species (ROS). In summary, this work provides a simple way to tune pore sizes without the use of any template and an insight into the influence of pore size for the photocatalytic degradation of rhodamine B.