Monomeric and dimeric magnesium mono-BHT complexes as effective ROP catalysts

Synthesis of ω-Hydroxy Fatty Acid Alkyl Esters by Macrocyclic Lactones Alcoholysis Catalyzed by Homoleptic and Heteroleptic Zinc Aryloxides

A series of zinc aryloxides, [Zn4(sal-Me)8]⋅2.5(C7H8) (1), [Zn4(sal-Me)8]⋅CH2Cl2 (2), [Zn4(μ3-OR)2(sal-R)6] (3) (for R=Me (0.51), Et (0.49)), [Zn4(μ3-OMe)4(sal-Me)4(HOMe)4] (4), [Zn(sal-Me)2(py)2]⋅THF (5), {[Zn(sal-Me)2(tmbpy)] ⋅ 2(C6H5CH3)}n (6), [Zn2(sal-Me)2(THF)2Cl2] ⋅ 0.5(C6H5CH3) (7), and [Zn4(μ3-OMe)2(sal-Me)4Cl2] (8) (Hsal-Me=methyl salicylate, py=pyridine, tmbpy=4,4'-trimethylenedipyridine) were obtained that have different nuclearities and central core topologies and contain ligands of different basicity and coordination abilities.

Simple magnesium alkoxides: synthesis, molecular structure, and catalytic behaviour in the ring-opening polymerization of lactide and macrolactones and in the copolymerization of maleic anhydride and propylene oxide

The synthesis of two chiral bulky alkoxide pro-ligands, 1-adamantyl-tert-butylphenylmethanol HOCAdtBuPh and 1-adamantylmethylphenylmethanol HOCAdMePh, is reported and their coordination chemistry with magnesium(II) is described and compared with the coordination chemistry of the previously reported achiral bulky alkoxide pro-ligand HOCtBu2Ph. Treatment of n-butyl-sec-butylmagnesium with two equivalents of the racemic mixture of HOCAdtBuPh led selectively to the formation of the mononuclear bis(alkoxide) complex Mg(OCAdtBuPh)2(THF)2. 1H NMR spectroscopy and X-ray crystallography suggested the selective formation of the C2-symmetric homochiral diastereomer Mg(OCRAdtBuPh)2(THF)2/Mg(OCSAdtBuPh)2(THF)2. In contrast, the less sterically encumbered HOCAdMePh led to the formation of dinuclear products indicating only partial alkyl group substitution. The mononuclear Mg(OCAdtBuPh)2(THF)2 complex was tested as a catalyst in different reactions for the synthesis of polyesters. In the ROP of lactide, Mg(OCAdtBuPh)2(THF)2 demonstrated very high activity, higher than that shown by Mg(OCtBu2Ph)2(THF)2, although with moderate control degrees. Both Mg(OCAdtBuPh)2(THF)2 and Mg(OCtBu2Ph)2(THF)2 were found to be very effective in the polymerization of macrolactones such as ω-pentadecalactone (PDL) and ω-6-hexadecenlactone (HDL) also under mild reaction conditions that are generally prohibitive for these substrates. The same catalysts demonstrated efficient ring-opening copolymerization (ROCOP) of propylene oxide (PO) and maleic anhydride (MA) to produce poly(propylene maleate).

Raman Study of Block Copolymers of Methyl Ethylene Phosphate with Caprolactone and L-lactide

We present an in-depth analysis of Raman spectra of novel block copolymers of methyl ethylene phosphate (MeOEP) with caprolactone (CL) and L-lactide (LA), recorded with the excitation wavelengths of 532 and 785 nm. The experimental peak positions, relative intensities and profiles of the poly(methyl ethylene phosphate) (PMeOEP), polycaprolactone (PCL) and poly(L-lactide) (PLA) bands in the spectra of the copolymers and in the spectra of the PMeOEP, PCL and PLA homopolymers turn out to be very similar. This clearly indicates the similarity between the conformational and phase compositions of PMeOEP, PCL and PLA parts in molecules of the copolymers and in the PMeOEP, PCL and PLA homopolymers. Experimental ratios of the peak intensities of PMeOEP bands at 737 and 2963 cm^-1 and the PCL bands at 1109, 1724 and 2918 cm^-1 can be used for the estimation of the PCL-b-PMeOEP copolymers chemical composition. Even though only one sample of the PMeOEP-b-PLA copolymers was experimentally studied in this work, we assume that the ratios of the peak intensities of PLA bands at 402, 874 and 1768 cm^-1 and the PMeOEP band at 737 cm^-1 can be used to characterize the copolymer chemical composition.

Chain-End Functionalization of Poly(ε-caprolactone) for Chemical Binding with Gelatin: Binary Electrospun Scaffolds with Improved Physico-Mechanical Characteristics and Cell Adhesive Properties

Composite biocompatible scaffolds, obtained using the electrospinning (ES) technique, are highly promising for biomedical application thanks to their high surface area, porosity, adjustable fiber diameter, and permeability. However, the combination of synthetic biodegradable (such as poly(ε-caprolactone) PCL) and natural (such as gelatin Gt) polymers is complicated by the problem of low compatibility of the components. Previously, this problem was solved by PCL grafting and/or Gt cross-linking after ES molding. In the present study, composite fibrous scaffolds consisting of PCL and Gt were fabricated by the electrospinning (ES) method using non-functionalized PCL1 or NHS-functionalized PCL2 and hexafluoroisopropanol as a solvent. To provide covalent binding between PCL2 and Gt macromolecules, NHS-functionalized methyl glutarate was synthesized and studied in model reactions with components of spinning solution. It was found that selective formation of amide bonds, which provide complete covalent bonding of Gt in PCL/Gt composite, requires the presence of weak acid. With the use of the optimized ES method, fibrous mats with different PCL/Gt ratios were prepared. The sample morphology (SEM), hydrolytic resistance (FT-IR), cell adhesion and viability (MTT assay), cell penetration (fluorescent microscopy), and mechanical characteristics of the samples were studied. PCL2-based films with a Gt content of 20 wt% have demonstrated the best set of properties.

Functionalized Biodegradable Polymers via Termination of Ring-Opening Polymerization by Acyl Chlorides

Aliphatic polyesters are an important class of polymeric materials for biomedical applications due to their versatile and tunable chemistry, biocompatibility and biodegradability. A capability of direct bonding with biomedically significant molecules, provided by the presence of the reactive end functional groups (FGs), is highly desirable for prospective polymers. Among FGs, N-hydroxysuccinimidyl activated ester group (NHS) and maleimide fragment (MI) provide efficient covalent bonding with -NH- and -SH containing compounds. In our study, we found that NHS- and MI-derived acyl chlorides efficiently terminate living ring-opening polymerization of ε-caprolactone, L-lactide, ethyl ethylene phosphonate and ethyl ethylene phosphate, catalyzed by 2,6-di-tert-butyl-4-methylphenoxy magnesium complex, with a formation of NHS- and MI-functionalized polymers at a high yields. Reactivity of these polymers towards amine- and thiol-containing model substrates in organic and aqueous media was also studied.

A New Approach to Developing Long-Acting Injectable Formulations of Anti-HIV Drugs: Poly(Ethylene Phosphoric Acid) Block Copolymers Increase the Efficiency of Tenofovir against HIV-1 in MT-4 Cells

Despite the world’s combined efforts, human immunodeficiency virus (HIV), the causative agent of AIDS, remains one of the world’s most serious public health challenges. High genetic variability of HIV complicates the development of anti-HIV vaccine, and there is an actual clinical need for increasing the efficiency of anti-HIV drugs in terms of targeted delivery and controlled release. Tenofovir (TFV), a nucleotide-analog reverse transcriptase inhibitor, has gained wide acceptance as a drug for pre-exposure prophylaxis or treatment of HIV infection. In our study, we explored the potential of tenofovir disoproxil (TFD) adducts with block copolymers of poly(ethylene glycol) monomethyl ether and poly(ethylene phosphoric acid) (mPEG-b-PEPA) as candidates for developing a long-acting/controlled-release formulation of TFV. Two types of mPEG-b-PEPA with numbers of ethylene phosphoric acid (EPA) fragments of 13 and 49 were synthesized by catalytic ring-opening polymerization, and used for preparing four types of adducts with TFD. Antiviral activity of [mPEG-b-PEPA]TFD or tenofovir disoproxil fumarate (TDF) was evaluated using the model of experimental HIV infection in vitro (MT-4/HIV-1_IIIB). Judging by the values of the selectivity index (SI), TFD exhibited an up to 14-fold higher anti-HIV activity in the form of mPEG-b-PEPA adducts, thus demonstrating significant promise for further development of long-acting/controlled-release injectable TFV formulations.

In Vitro and In Vivo Studies of Biodegradability and Biocompatibility of Poly(εCL)-b-Poly(EtOEP)-Based Films

The control of surface bioadhesive properties of the subcutaneous implants is essential for the development of biosensors and controlled drug release devices. Poly(alkyl ethylene phosphate)-based (co)polymers are structurally versatile, biocompatible and biodegradable, and may be regarded as an alternative to poly(ethylene glycol) (PEG) copolymers in the creation of antiadhesive materials. The present work reports the synthesis of block copolymers of ε-caprolactone (εCL) and 2-ethoxy-1,3,2-dioxaphospholane-2-oxide (ethyl ethylene phosphate, EtOEP) with different content of EtOEP fragments, preparation of polymer films, and the results of the study of the impact of EtOEP/εCL ratio on the hydrophilicity (contact angle of wetting), hydrolytic stability, cytotoxicity, protein and cell adhesion, and cell proliferation using umbilical cord multipotent stem cells. It was found that the increase of EtOEP/εCL ratio results in increase of hydrophilicity of the polymer films with lowering of the protein and cell adhesion. MTT cytotoxicity test showed no significant deviations in toxicity of poly(εCL) and poly(εCL)-b-poly(EtOEP)-based films. The influence of the length of poly(EtOEP)chain in block-copolymers on fibrotic reactions was analyzed using subcutaneous implantation experiments (Wistar line rats), the increase of the width of the fibrous capsule correlated with higher EtOEP/εCL ratio. However, the copolymer-based film with highest content of polyphosphate had been subjected to faster degradation with a formation of developed contact surface of poly(εCL). The rate of the degradation of polyphosphate in vivo was significantly higher than the rate of the degradation of polyphosphate in vitro, which only confirms an objective value of in vivo experiments in the development of polymer materials for biomedical applications.

Comparative Experimental and Theoretical Study of Mg, Al and Zn Aryloxy Complexes in Copolymerization of Cyclic Esters: The Role of the Metal Coordination in Formation of Random Copolymers

Homogeneity of copolymers is a general problem of catalytic coordination polymerization. In ring-opening polymerization of cyclic esters, the rational design of the catalyst is generally applied to solve this problem by the equalization of the reactivities of comonomers-however, it often leads to a reduction of catalytic activity. In the present paper, we studied the catalytic behavior of BnOH-activated complexes (ВНТ)Mg(THF)2nBu (1), (ВНТ)2AlMe (2) and [(ВНТ)ZnEt]2 (3), based on 2,6-di-tert-butyl-4-methylphenol (BHT-H) in homo- and copolymerization of L-lactide (lLA) and ε-caprolactone (εCL). Even at 1:5 lLA/εCL ratio Mg complex 1 catalyzed homopolymerization of lLA without involving εCL to the formation of the polymer backbone. On the contrary, Zn complex 3 efficiently catalyzed random lLA/εCL copolymerization; the presence of mono-lactate subunits in the copolymer chain clearly pointed to the transesterification mechanism of copolymer formation. Both epimerization and transesterification side processes were analyzed using the density functional theory (DFT) modeling that confirmed the qualitative difference in catalytic behavior of 1 and 3: Mg and Zn complexes demonstrated different types of preferable coordination on the PLA chain (k2 and k3, respectively) with the result that complex 3 catalyzed controlled εCL ROP/PLA transesterification, providing the formation of lLA/εCL copolymers that contain mono-lactate fragments separated by short oligo(εCL) chains. The best results in the synthesis of random lLA/εCL copolymers were obtained during experiments on transesterification of commercially available PLLA, the applicability of 3/BnOH catalyst in the synthesis of random copolymers of εCL with methyl glycolide, ethyl ethylene phosphonate and ethyl ethylene phosphate was also demonstrated.

Synthesis of a mononuclear magnesium bis(alkoxide) complex and its reactivity in the ring-opening copolymerization of cyclic anhydrides with epoxides

Synthesis of a new mononuclear magnesium complex with a bulky bis(alkoxide) ligand environment and its reactivity in ring-opening polymerization (ROP) and ring-opening copolymerization (ROCOP) are reported. Reaction of n-butyl-sec-butylmagnesium with two equivalents of HOR (HOR = di-tert-butylphenylmethanol, HOCtBu2Ph) formed Mg(OR)2(THF)2. The reaction proceeded via the Mg(OR)(sec-Bu)(THF)2 intermediate that was independently synthesized by treating n-butyl-sec-butylmagnesium with one equivalent of HOR. Mg(OR)2(THF)2 led to active albeit not well-controlled ROP of rac-lactide. In contrast, well-controlled ROCOP of epoxides with cyclic anhydrides was observed, including efficient and alternating copolymerization of phthalic anhydride with cyclohexene oxide as well as rare copolymerization of phthalic anhydride with limonene oxide and terpolymerization of phthalic anhydride with both cyclohexene oxide and limonene oxide. In addition, novel copolymerization of dihydrocoumarin with limonene oxide is described.

Coordination Ring-Opening Polymerization of Cyclic Esters: A Critical Overview of DFT Modeling and Visualization of the Reaction Mechanisms

Ring-opening polymerization (ROP) of cyclic esters (lactones, lactides, cyclic carbonates and phosphates) is an effective tool to synthesize biocompatible and biodegradable polymers. Metal complexes effectively catalyze ROP, a remarkable diversity of the ROP mechanisms prompted the use of density functional theory (DFT) methods for simulation and visualization of the ROP pathways. Optimization of the molecular structures of the key reaction intermediates and transition states has allowed to explain the values of catalytic activities and stereocontrol events. DFT computation data sets might be viewed as a sound basis for the design of novel ROP catalysts and cyclic substrates, for the creation of new types of homo- and copolymers with promising properties. In this review, we summarized the results of DFT modeling of coordination ROP of cyclic esters. The importance to understand the difference between initiation and propagation stages, to consider the possibility of polymer-catalyst coordination, to figure out the key transition states, and other aspects of DFT simulation and visualization of ROP have been also discussed in our review.

DFT Visualization and Experimental Evidence of BHT-Mg-Catalyzed Copolymerization of Lactides, Lactones and Ethylene Phosphates

Catalytic ring-opening polymerization (ROP) of cyclic esters (lactides, lactones) and cyclic ethylene phosphates is an effective way to process materials with regulated hydrophilicity and controlled biodegradability. Random copolymers of cyclic monomers of different chemical nature are highly attractive due to their high variability of characteristics. Aryloxy-alkoxy complexes of non-toxic metals such as derivatives of 2,6-di-tert-butyl-4-methylphenoxy magnesium (BHT-Mg) complexes are effective coordination catalysts for homopolymerization of all types of traditional ROP monomers. In the present paper, we report the results of density functional theory (DFT) modeling of BHT-Mg-catalyzed copolymerization for lactone/lactide, lactone/ethylene phosphate and lactide/ethylene phosphate mixtures. ε-Caprolactone (ε-CL), l-lactide (l-LA) and methyl ethylene phosphate (MeOEP) were used as examples of monomers in DFT simulations by the Gaussian-09 program package with the B3PW91/DGTZVP basis set. Both binuclear and mononuclear reaction mechanistic concepts have been applied for the calculations of the reaction profiles. The results of calculations predict the possibility of the formation of random copolymers based on l-LA/MeOEP, and substantial hindrance of copolymerization for ε-CL/l-LA and ε-CL/MeOEP pairs. From the mechanistic point of view, the formation of highly stable five-membered chelate by the products of l-LA ring-opening and high donor properties of phosphates are the key factors that rule the reactions. The results of DFT modeling have been confirmed by copolymerization experiments.

Stepwise Reduction at Magnesium and Beryllium: Cooperative Effects of Carbenes with Redox Non-Innocent α-Diimines

In the past two decades, the organometallic chemistry of the alkaline earth elements has experienced a renaissance due in part to developments in ligand stabilization strategies. In order to expand the scope of redox chemistry known for magnesium and beryllium, we have synthesized a set of reduced magnesium and beryllium complexes and compared their resulting structural and electronic properties. The carbene-coordinated alkaline earth-halides, (^Et2CAAC)MgBr₂ (1), (SIPr)MgBr₂ (2), (^Et2CAAC)BeCl₂ (3), and (SIPr)BeCl₂ (4) [^Et2CAAC = diethyl cyclic(alkyl)(amino) carbene; SIPr = 1,3-bis(2,6-diisopropylphenyl)-4,5-dihydroimidazole-2-ylidene] were combined with an α-diimine [2,2-bipyridine (bpy) or bis(2,6-diisopropylphenyl)-1,4-diazabutadiene (^DippDAB)] and the appropriate stoichiometric amount of potassium graphite to form singly- and doubly-reduced compounds (^Et2CAAC)MgBr(^DippDAB) (5), (^Et2CAAC)MgBr(bpy) (6), (^Et2CAAC)Mg(^DippDAB) (7), (^Et2CAAC)Be(bpy) (8), and (SIPr)Be(bpy) (9). The doubly-reduced compounds 7-9 exhibit substantial π-bonding interactions across the diimine core, metal center, and π-acidic carbene. Each complex was fully characterized by UV-vis, FT-IR, X-ray crystallography, ¹H, ¹³C, and ⁹Be NMR, or EPR where applicable. We use these compounds to highlight the differences in the organometallic chemistry of the lightest alkaline earth metals, magnesium and beryllium, in an otherwise identical chemical environment.

(1R,2S,4r)-1,2,4-Tri-phenyl-cyclo-pentane-1,2-diol and (1R,2S,4r)-4-(2-meth-oxy-phen-yl)-1,2-di-phenyl-cyclo-pentane-1,2-diol: application as initiators for ring-opening polymerization of ∊-caprolactone

Reductive cyclization of 1,3,5-triphenyl- and 3-(2-meth-oxy-phen-yl)-1,5-di-phenyl-pentane-1,5-diones by zinc in acetic acid medium leads to the formation of 1,2,4-tri-phenyl-cyclo-pentane-1,2-diol [1,2,4-Ph3C5H5-1,2-(OH)2, C23H22O2, (I)] and 4-(2-meth-oxy-phen-yl)-1,2-di-phenyl-cyclo-pentane-1,2-diol [4-(2-MeOC6H4)-1,2-Ph2C5H5-1,2-(OH)2, C24H24O3, (II)]. Their single crystals have been obtained by crystallization from a THF/hexane solvent mixture. Diols (I) and (II) crystallize in ortho-rhom-bic (Pbca) and triclinic (P ) space groups, respectively, at 150 K. Their asymmetric units comprise one [in the case of (I)] and three [in the case of (II)] crystallographically independent mol-ecules of the achiral (1R,2S,4r)-diol isomer. Each hydroxyl group is involved in one intra-molecular and one inter-molecular O-H⋯O hydrogen bond, forming one-dimensional chains. Compounds (I) and (II) have been used successfully as precatalyst activators for the ring-opening polymerization of ∊-caprolactone.

Mechanistic Insights of BHT-Mg-Catalyzed Ethylene Phosphate's Coordination Ring-Opening Polymerization: DFT Modeling and Experimental Data

Poly(ethylene phosphates) are promising polymers for use in biomedical applications. Catalytic ring-opening polymerization (ROP) of cyclic ethylene phosphate monomers (CEPMs) is the most effective approach for obtaining these polymers. The mechanism of coordination ROP of CEPMs remains unclear. We report, for the first time, the results of DFT modeling of CEPM ROP. In these calculations by Gaussian-09 program package with the B3PW91/DGTZVP basis set, we explored methyl ethylene phosphate (MeOEP) ROP catalyzed by dimeric and monomeric catalytic species derived from heteroleptic complex [(BHT)Mg(μ-OBn)(THF)]₂ (Mg1, BHT = 2,6-di-tert-butyl-4-methylphenolate). Analysis of the reaction profiles for the binuclear and mononuclear reaction mechanisms allowed us to conclude that the ROP of MeOEP is preferentially catalyzed by mononuclear Mg complexes. This estimation was confirmed by comparative polymerization experiments using MeOEP and traditional monomers ε-caprolactone (εCL), racemic lactide (rac-LA), and l-lactide (l-LA) initiated by Mg1. ROP of MeOEP proceeds at an extremely high rate due to the substantially lower activation barrier calculated for mononuclear mechanism in comparison with that of cyclic esters that polymerize without the dissociation of BHT-Mg binuclear species. We also demonstrated the use of MeOEP as a "monomerization" agent in the synthesis of MeOEP-lactide block copolymers. Comparison of the multiple acceleration of l-LA ROP after MeOEP prepolymerization and formation of atactic PLA blocks in rac-LA polymerization with the heterotactic PLA formation during Mg1-catalyzed homopolymerization also confirmed the mononuclear nature of the polyphosphate-containing catalytic particles.

Phenoxide and alkoxide complexes of Mg, Al and Zn, and their use for the ring-opening polymerization of ℇ-caprolactone with initiators of different natures

A new packing polymorph of bis(2,6-di-tert-butyl-4-methylphenolato-κO)bis(tetrahydrofuran-κO)magnesium, [Mg(C₁₅H₂₃O)₂(C₄H₈O)₂] or Mg(BHT)₂(THF)₂, (BHT is the 2,6-di-tert-butyl-4-methylphenoxide anion and THF is tetrahydrofuran), (1), has the same space group (P2₁) as the previously reported modification [Nifant'ev et al. (2017d). Dalton Trans. 46, 12132-12146], but contains three crystallographically independent molecules instead of one. The structure of (1) exhibits rotational disorder of the tert-butyl groups and positional disorder of a THF ligand. The complex of bis(2,6-di-tert-butyl-4-methylphenolato-κO)bis(μ₂-ethyl glycolato-κ²O,O':κO)dimethyldialuminium, [Al₂(CH₃)₂(C₄H₇O₃)₂(C₁₅H₂₃O)₂] or [(BHT)AlMe(OCH₂COOEt)]₂, (2), is a dimer located on an inversion centre and has an Al₂O₂ rhomboid core. The 2-ethoxy-2-oxoethanolate ligand (OCH₂COOEt) displays a μ₂-κ²O,O':κO semi-bridging coordination mode, forming a five-membered heteronuclear Al-O-C-C-O ring. The same ligand exhibits positional disorder of the terminal methyl group. The redetermined structure of the heptanuclear complex octakis(μ₃-benzyloxo-κO:κO:κO)hexaethylheptazinc, [Zn₇(C₂H₅)₆(C₇H₇O)₈] or [Zn₇(OCH₂Ph)₈Et₆], (3), possesses a bicubic Zn₇O₈ core located at an inversion centre and demonstrates positional disorder of one crystallographically independent phenyl group. Cambridge Structural Database surveys are given for complexes structurally analogous to (2) and (3). Complexes (2) and (3), as well as derivatives of (1), are of interest as catalysts for the ring-opening polymerization of ℇ-caprolactone, and polymerization results are reported.

Structural diversity of polynuclear MgxOy cores in magnesium phenoxide complexes

The binuclear complex bis(2,6-di-tert-butyl-4-methylphenolato)-1κO,2κO-(1,2-dimethoxyethane-1κ²O,O')bis(μ-phenylmethanolato-1:2κ²O:O)(tetrahydrofuran-2κO)dimagnesium(II), [Mg₂(C₇H₇O)₂(C₁₅H₂₃O)₂(C₄H₈O)(C₄H₁₀O₂)] or [(BHT)(DME)Mg(μ-OBn)₂Mg(THF)(BHT)], (I), was obtained from the complex [(BHT)Mg(μ-OBn)(THF)]₂ by substitution of one tetrahydrofuran (THF) molecule with 1,2-dimethoxyethane (DME) in toluene (BHT is O-2,6-^tBu₂-4-MeC₆H₄ and Bn is benzyl). The trinuclear complex bis(2,6-di-tert-butyl-4-methylphenolato)-1κO,3κO-tetrakis(μ-2-methylphenolato)-1:2κ⁴O:O;2:3κ⁴O:O-bis(tetrahydrofuran)-1κO,3κO-trimagnesium(II), [Mg₃(C₇H₇O)₄(C₁₅H₂₃O)₂(C₄H₈O)₂] or [(BHT)₂(μ-O-2-MeC₆H₄)₄(THF)₂Mg₃], (II), was formed from a mixture of Bu₂Mg, [(BHT)Mg(ⁿBu)(THF)₂] and 2-methylphenol. An unusual tetranuclear complex, bis(μ₃-2-aminoethanolato-κ⁴O:O:O,N)tetrakis(μ₂-2-aminoethanolato-κ³O:O,N)bis(2,6-di-tert-butyl-4-methylphenolato-κO)tetramagnesium(II), [Mg₄(C₂H₆NO)₆(C₁₅H₂₃O)₂] or Mg₄(BHT)₂(OCH₂CH₂NH₂)₆, (III), resulted from the reaction between (BHT)₂Mg(THF)₂ and 2-aminoethanol. A polymerization test demonstrated the ability of (III) to catalyse the ring-opening polymerization of ℇ-caprolactone without activation by alcohol. In all three complexes (I)-(III), the BHT ligand demonstrates the terminal κO-coordination mode. Complexes (I), (II) and (III) have binuclear rhomboid Mg₂O₂, trinuclear chain-like Mg₃O₄ and bicubic Mg₄O₆ cores, respectively. A survey of the literature on known polynuclear Mg_xO_y core types for ArO-Mg complexes is also presented.

Mono-BHT heteroleptic magnesium complexes: synthesis, molecular structure and catalytic behavior in the ring-opening polymerization of cyclic esters

Numerous heteroleptic 2,6-di-tert-butyl-4-methylphenolate (BHT) magnesium complexes have been synthesized by treatment of (BHT)MgBu(THF)₂ with various alcohols. Molecular structures of the complexes have been determined by X-ray diffraction. The magnesium coordination number in [(BHT)Mg(μ-OBn)(THF)]₂ (3) and [(BHT)Mg(μ-O-tert-BuC₆H₄)(THF)]₂ (4) is equal to 4. Complexes formed from esters of glycolic and lactic acids, [(BHT)Mg(μ-OCH₂COOEt)(THF)]₂ (5) and [(BHT)Mg(μ-OCH(CH₃)COOCH₂COO^tBu)(THF)]₂ (6) contain chelate fragments with pentacoordinated magnesium. Compounds 3-6 contain THF molecules coordinated to magnesium atoms. Complex {(BHT)Mg[μ-O(CH₂)₃CON(CH₃)₂]}₂ (7) does not demonstrate any tendency to form an adduct with THF. It has been experimentally determined that complexes 3 and 5 are highly active catalysts of lactide polymerization. The activity of 4 is rather low, and complex 7 demonstrates moderate productivity. According to DOSY NMR experiments, compounds 3 and 5 retain their dimeric structures even in THF. The free energies of model dimeric [(DBP)Mg(μ-OMe)(Sub)]₂ and monomeric (DBP)Mg(OMe)(Sub)₂ products on treatment of [(DBP)Mg(μ-OMe)(THF)]₂ with a series of σ-electron donors (Sub) have been estimated by DFT calculations. These results demonstrate that the substitution of THF by Sub in a dimeric molecule is an energetically allowed process, whereas the dissociation of dimers is energetically unfavorable. DFT modeling of ε-CL and (dl)-lactide ROP catalyzed by dimeric and monomeric complexes showed that a cooperative effect of two magnesium atoms occurs within the ROP for binuclear catalytic species. A comparison of the reaction profiles for ROP catalyzed by binuclear and mononuclear species allowed us to conclude that the binuclear mechanism is favorable in early stages of ROP initiated by dimers 3 and 5.

Controlled ring-opening polymerisation of cyclic phosphates, phosphonates and phosphoramidates catalysed by heteroleptic BHT-alkoxy magnesium complexes

BHT-Mg-alkoxides are readily available and effective ROP catalysts for cyclic ethylene phosphate monomers and outperform conventional organocatalysts in versatility.