Highly enhanced visible light photocatalytic activity of CeO2 through fabricating a novel p–n junction BiOBr/CeO2

Pioneering superior efficiency in Methylene blue and Rhodamine b dye degradation under solar light irradiation using CeO2/Co3O4/g-C3N4 ternary photocatalysts

In this research work, we have successfully synthesized the CeO2/Co3O4/g-C3N4 ternary nanocomposite for hydrothermal method for photocatalytic applications. The synthesized nanocomposites were characterized using X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, Field emission scanning electron microscopy (FE-SEM), Transmission electron microscopy TEM, Photoluminescent spectra (PL), X-ray photoelectron spectroscopy (XPS), Brunauer- Emmett-Teller (BET) and Ultraviolet diffuse reflectance spectroscopy (UV-DRS) technique. As per the optical spectroscopic investigations CeO2/Co3O4/g-C3N4 ternary nanocomposite exhibited the high optical absorption range and its band gap is reduced from 2.95 eV to1.83 eV. The PL spectra showed the lowered emission peak intensity of ternary nanocomposite which is revealed that the better charge separation and slow recombination of electron hole pairs. The highest photocatalytic degradation efficiency of CeO2/Co3O4/g-C3N4 ternary nanocomposite showed 93 % and 86 % towards the pollutant methylene blue and Rhodamine B. Moreover, photodegradation of the pollutants followed pseudo-first order kinetics with a very high-rate constant of 0.02211 min-1 and 0.017756 min-1. Additionally, the ternary nano catalyst was delivered the remarkable stability performance even after five cycles. This research may provide a low-cost approach for synthesized visible light responsive catalysts for use in environmental remediation applications.

Photoelectrochemical quenching-recovery biosensor based on NSCQDs/Fe2O3@Bi2S3 for the detection of trypsin

BACKGROUND

The content of trypsin will change when pancreatic diseases occur, therefore developing a high-performance method for trypsin detection is of great significance for guiding patients on medication plans and improving their prognosis. Photoelectrochemical (PEC) analysis techniques have emerged as a solution to apply for bioassays.

RESULTS

Herein, the Fe2O3@Bi2S3 and Nitrogen and sulfur co-doped carbon quantum dots (NSCQDs) were successfully synthesized by a hydrothermal method. Subsequently, NSCQDs/Fe2O3@Bi2S3 with a photocurrent amplification effect covered on fluorine-doped tin oxide (FTO) electrode as the substrate material and apoferritin (APO) as a bio-recognition element to quench the photocurrent of the substrate material which can be excited with light. Due to the decomposition specifically between APO and trypsin, the photocurrent response increased. The linear range for trypsin detection showed satisfied results from 2 to 1000 ng mL-1 under optimal conditions, with a detection limit of 0.42 ng mL-1 and a recovery rate of 97.41 %-103.02 %, enabling efficient quantitative analysis of trypsin.

SIGNIFICANCE

In this experiment, a PEC biosensor with simple operation, low detection limit, excellent selectivity and strong stability was successfully prepared, enabling quantitative analysis of trypsin in human serum samples through the quenching-recovery mechanism. It holds great significance for diagnosis and serves as a practical method for the detection of trypsin in the future.

Recent Progress in Photocatalytic Degradation of Water Pollution by Bismuth Tungstate

Photocatalysis has emerged as a highly promising, green, and efficient technology for degrading pollutants in wastewater. Among the various photocatalysts, Bismuth tungstate (Bi2WO6) has gained significant attention in the research community due to its potential in environmental remediation and photocatalytic energy conversion. However, the limited light absorption ability and rapid recombination of photogenerated carriers hinder the further improvement of Bi2WO6's photocatalytic performance. This review aims to present recent advancements in the development of Bi2WO6-based photocatalysts. It delves into the photocatalytic mechanism of Bi2WO6 and summarizes the achieved photocatalytic characteristics by controlling its morphology, employing metal and non-metal doping, constructing semiconductor heterojunctions, and implementing defective engineering. Additionally, this review explores the practical applications of these modified Bi2WO6 photocatalysts in wastewater purification. Furthermore, this review addresses existing challenges and suggests prospects for the development of efficient Bi2WO6 photocatalysts. It is hoped that this comprehensive review will serve as a valuable reference and guide for researchers seeking to advance the field of Bi2WO6 photocatalysis.

Enhanced Catalytic Performance of Ag NP/0.95AgNbO3-0.05LiTaO3 Heterojunction from the Combination of Surface Plasma Resonance Effect and Piezoelectric Effect Using Facile Mechanical Milling

An internal built electric field can suppress the recombination of electron-hole pairs and distinctly enhance the catalytic activity of a photocatalyst. Novel t-Ag/0.95AgNbO3-0.05LiTaO3 heterojunction was prepared by reducing silver nanoparticles (Ag NPs) on the surface of the piezoelectric powder 0.95AgNbO3-0.05LiTaO3 (0.05-ANLT) using a simple mechanical milling method. The effects of milling time and excitation source used for the degradation of organic dye by heterojunction catalysts were investigated. The results demonstrate that the optimized 1.5-Ag/0.05-ANLT heterojunction removes 97% RhB within 40 min, which is 7.8 times higher than that of single piezoelectric catalysis and 25.4 times higher than that of single photocatalysis. The significant enhancement of photocatalytic activity can be attributed to the synergistic coupling of the surface plasmon resonance (SPR) effect and the piezoelectric effect.

Magnetically Controlled and Addressable Photoelectrochemical Sensor Array with Self-Calibration for the Label-Free Detection of Amyloid β-Proteins

A label-free addressable photoelectric immunosensor array was designed for the detection of amyloid β-proteins based on magnetic separation and self-calibration strategies. In this paper, Na2Ti6O13 with a flower-like morphology was prepared by the hydrothermal method; after continuously combining Fe3O4 and CdS, it was endowed with magnetism and better photoelectric activity. Subsequently, a series of reactions occurred in the solution, and the magnetic separation method was used to enrich the target. On the other hand, the ITO glass was separated into eight sites (2 × 4) using magnets, and a light shield was utilized to prevent light exposure, resulting in addressable and continuous detection. After the uniform preparation of magnetic photoelectric materials and precise control of testing conditions, the relative errors among different sites have been effectively reduced. Moreover, incorporating a self-calibration strategy has allowed the sensor array to achieve greater accuracy. The proposed photoelectrochemical biosensor exhibits a good relationship with amyloid β-protein ranging from 0.01 to 100 ng mL-1 with a limit of detection of 1.1 pg mL-1 and exhibits excellent specificity, reproducibility, and stability.

Effects of Different Lengths of Oligo (Ethylene Glycol) Side Chains on the Electrochromic and Photovoltaic Properties of Benzothiadiazole-Based Donor-Acceptor Conjugated Polymers

In recent years, donor-acceptor (D-A)-type conjugated polymers have been widely used in the field of organic solar cells (OSCs) and electrochromism (EC). Considering the poor solubility of D-A conjugated polymers, the solvents used in material processing and related device preparation are mostly toxic halogenated solvents, which have become the biggest obstacle to the future commercial process of the OSC and EC field. Herein, we designed and synthesized three novel D-A conjugated polymers, PBDT1-DTBF, PBDT2-DTBF, and PBDT3-DTBF, by introducing polar oligo (ethylene glycol) (OEG) side chains of different lengths in the donor unit benzodithiophene (BDT) as side chain modification. Studies on solubility, optics, electrochemical, photovoltaic and electrochromic properties are conducted, and the influence of the introduction of OEG side chains on its basic properties is also discussed. Studies on solubility and electrochromic properties show unusual trends that need further research. However, since PBDT-DTBF-class polymers and acceptor IT-4F failed to form proper morphology under the low-boiling point solvent THF solvent processing, the photovoltaic performance of prepared devices is not ideal. However, films with THF as processing solvent showed relatively desirable electrochromic properties and films cast from THF display higher CE than CB as the solvent. Therefore, this class of polymers has application feasibility for green solvent processing in the OSC and EC fields. The research provides an idea for the design of green solvent-processable polymer solar cell materials in the future and a meaningful exploration of the application of green solvents in the field of electrochromism.

Metal Complex/ZnS-Modified Ni Foam as Magnetically Stirrable Photocatalysts: Roles of Redox Mediators and Carrier Dynamics Monitored by Operando Synchrotron X-ray Spectroscopy

Magnetically stirrable photocatalysts binding the ZnS-decorated Ni foam with the metal complex cocatalyst as a redox mediator and light-absorbing composition were investigated. Loading metal complex can improve light absorption, surface hydrophilicity, interfacial charge migration, and H₂ production activity. The variation of the metal valences of the composite photocatalysts in an operando environment (with sacrificial agent solution) with and without light irradiation was investigated by X-ray absorption near-edge structure (XANES) spectra and Fourier-transformed extended X-ray absorption fine structure (EXAFS) spectra to monitor the charge carrier dynamics of photocatalysis and explain how the macrocyclic Cu complex (CuC) acted as a redox mediator better than the Ni complex. The smaller valence difference of copper valence in ZS/CuC for dark and light states revealed that the Cu complex facilitates a reversible electron transfer between the ZnS photocatalyst and H⁺. Loading the Cu complex can improve the separation of photogenerated carriers by the redox couple of complexes, leading to a significantly improved photocatalytic H₂ production activity of 8150 μmol h^-1 g^-1. The reactants can flow through these magnetically stirrable Ni foam-based photocatalysts by magnetic-field-driven stirring, which improves the contact between photocatalysts and the sacrificial agents. The operando synchrotron provides new insights for understanding the roles of redox mediators.

Step-doped disulfide vacancies and functional groups synergistically enhance photocatalytic activity of S-scheme Cu3SnS4/L-BiOBr towards ciprofloxacin degradation

Development of efficient photocatalysts for efficient recalcitrant organic pollutants degradation is of great significance. Herein, the step-doped disulfide vacancies S-scheme Cu₃SnS₄/L-BiOBr (CTS/L-BiOBr) heterojunction photocatalyst was prepared for ciprofloxacin (CIP) degradation. X-ray photoelectron spectroscopy (XPS) analysis, ultraviolet photo-electron spectroscopy (UPS) analysis, band structure and dominant radicals' identification together verified that the transfer of photogenerated carriers conformed to the S-scheme mechanism. Benefited from the interfacial electric field (IEF) of the S-scheme heterojunction and incorporation of L-cysteine with introducing S-vacancies and surface functional groups (-NH₂, -COO^-), photogenerated charges generation and separation of the CTS/L-BiOBr₍₁₀₎ were greatly improved. With ·OH and h⁺ as dominant reactive species, CIP removal reached 93% using CTS/L-BiOBr₍₁₀₎ within 180 min of visible light irradiation, which was 3.5 times and 2.6 times of pristine Cu₃SnS₄ and L-BiOBr, respectively. Moreover, possible CIP degradation pathways were proposed and the degradation intermediates ecotoxicity were evaluated. This study could provide reference for designing efficient S-scheme photocatalysts for recalcitrant wastewater treatment.

Synthesis of Ag/BiOBr/CeO2 composites with enhanced photocatalytic degradation for sulfisoxazole

A novel Ag/BiOBr/CeO₂ composite was successfully prepared for the first time, which had excellent performance in degrading sulfisoxazole (SSX) under visible light irradiation. The as-prepared samples were characterized by SEM, XRD, UV-vis DRS and BET et al. The composite of 10% Ag/BiOBr/CeO₂ showed the best photocatalytic activity and more than 99.5% SSX can be removed within 20 min. It exhibited the highest k value of 0.2428 min^-1, which was about 39.7 times higher than pure BiOBr (6.11 × 10^-3 min^-1) and 22.1 times higher than BiOBr/CeO₂ (1.09 × 10^-2 min^-1), respectively. The addition of Ag significantly improved the absorption rate of visible light and the separation rate of photogenerated electron-hole pairs. The initial pH and dosage of samples could have an influence on the photocatalytic activity. The radical trapping experiments proved that ·O₂^- and h⁺ were the main active species involved in photocatalytic degradation. Finally, the synthesized catalyst maintained excellent photocatalytic activity after 5 repeated cycles, which indicated the extraordinary stability and recyclability of Ag/BiOBr/CeO₂.

6-Aza-2-thio-thymine-gold nanoclusters: an excellent candidate in the photoelectrochemical field

The high performance of the photoelectrochemical (PEC) properties of AuNCs can be achieved with 6-aza-2-thio-thymine-AuNCs (ATT-AuNCs) as a photoactive material. The ATT-AuNCs yielded a cathodic photocurrent density as high as 88 μA cm^-2 with O₂ as electron acceptor, which is three orders of magnitude higher than those of other AuNCs in aqueous solutions. Moreover, ATT-AuNCs also show a higher carrier density, shorter Debye length, and smaller depletion layer width than those of reported AuNCs. This work not only reveals the PEC performance and mechanism of ATT-AuNCs, but also establishes a framework for in-depth design and studying the PEC performance of AuNCs.

Ultrasensitive fluorescence detection of norfloxacin in aqueous medium employing a 2D Zn(ii)-based coordination polymer

A 2D fluorescent coordination polymer, {[Zn(L)0.5(mip)] 1.75H2O}n (1), was successfully assembled. 1 was developed as an ultrasensitive fluorescent probe for the sensing of norfloxacin (NOR) in water.

Hollow microspherical Bi2MoO6/Zn–Ti layered double hydroxide heterojunction for efficient visible-light photocatalytic degradation of organic contaminants

The construction of a Bi2MoO6/Zn–Ti layered double hydroxide heterojunction can effectively enhance the photocatalytic activity owing to efficient charge separation.

A novel type-II NiCo-LDH/CeO2 heterojunction for highly efficient photocatalytic H2 production

The study of environmentally friendly semiconductor photocatalysts has important practical significance for efficient photocatalytic hydrogen evolution.

Nanointerface engineering Z-scheme CuBiOS@CuBi2O4 heterojunction with OS interpenetration for enhancing photocatalytic hydrogen peroxide generation and accelerating chromium(VI) reduction

Designing a core-shell nanointerface is beneficial for enhancing the photocatalytic performance of hydrogen peroxide (H₂O₂) production. Hence, a direct Z-scheme one-dimensional (1 D) CuBiOS@CuBi₂O₄ nanorods with a core (oxide)-shell (sulfide) nanostructure and OS interpenetrated nanointerface was controllably synthesized through in-situ anion exchange. The formation of OS interpenetration at the heterogeneous interface with surface oxygen vacancies could effectively boost light absorption, reduce the interface contact resistance, facilitate band bending, and thus enhance charge separation and transfer as a "bridge". The as-prepared catalyst with tunable OS nanointerface greatly improved the photocatalytic performances in the H₂O₂ production with a yield of 201.9 μmol·L^-1 and the in-situ generated H₂O₂ effectively accelerated the reduction of chromium(VI) (Cr(VI), 95.4% within 15 min). The excellent performances were due to the OS interpenetration with rich oxygen vacancies and unique shell-core structure with intimate contact inter-doping nanointerface. Moreover, the photocatalytic mechanism was discussed in detail. This work might provide a guideline in the design and construction of high-performance catalysts with well-defined nanointerface for various applications.

A label-free photoelectrochemical immunosensor for prostate specific antigen detection based on Ag2S sensitized Ag/AgBr/BiOBr heterojunction by in-situ growth method

Prostate cancer is one of the most common cancers in the world, and its early detection is vital to saving the lives of patients. In this research, a novel label-free photoelectrochemical immunosensor was designed for sensitive detection of prostate specific antigen (PSA). Ag₂S sensitized on Ag/AgBr/BiOBr heterojunction could effectively inhibit photogenic holes recombination and improve photocurrent response and sensitivity. Ascorbic acid was an effective electron donor, which can effectively eliminate photo-generated holes. The photocurrent reduced linearly with the logarithm of PSA concentration ranged from 0.001 to 50 ng·mL^-1 and the limit of detection was 0.25 pg·mL^-1. The designed sensor had the advantages of wide linear range, good stability, high reproducibility, and good selectivity. This study not only provided a method for efficient and sensitive detection of PSA, but also provided valuable reference ideas for the detection of other tumor markers.

Preparation and application of BiOBr-Bi2S3 heterojunctions for efficient photocatalytic removal of Cr(VI)

Recently, the photocatalytic reduction of Cr(VI) has been extensively studied. Herein, we successfully prepared the BiOBr-Bi₂S₃ heterojunctions with high photocatalytic Cr(VI) reduction performance using an ion exchange method. The optimal BiOBr-Bi₂S₃ heterojunction (prepared with BiOBr, pH of 6.0, 2 mmol Na₂S₂O₃·5H₂O,) achieved 100% removal of Cr(VI) within 12 min. The performance of photo-reduced Cr(VI) was about 28.9 and 184.6 times higher than that of pure Bi₂S₃ and BiOBr, respectively. Besides, BiOBr-Bi₂S₃ heterojunctions had a good adsorption efficiency for Cr(III), suggesting that they could be applied as bifunctional photocatalyst. The formation process and photoelectric properties of the BiOBr-Bi₂S₃ heterojunctions were revealed by a series of characterizations. In conclusion, this work reported the synergistic effect of adsorption and photocatalysis of the BiOBr-Bi₂S₃ heterojunctions for Cr removal for the first time, suggesting that the BiOBr-Bi₂S₃ heterojunctions could act as a novel photocatalytic adsorbent to treat the Cr(VI)-containing wastewater.

Promoting Visible Light Generation of Hydrogen Using a Sol-Gel-Prepared MnCo2O4@g-C3N4 p-n Heterojunction Photocatalyst

The production of hydrogen using a new type of heterogeneous photocatalyst under visible light is considered a remarkable essential pathway for sustainable, pure energy not only on the laboratory scale but also on a bigger scale. Hence, a new nanocomposite of mesoporous MnCo₂O₄, g-C₃N₄, and MnCo₂O₄@g-C₃N₄ was produced utilizing a sol-gel method with variable MnCo₂O₄ contents. The crystal structure of MnCo₂O₄ was effectively confirmed by the X-ray diffraction pattern and integrated onto the g-C₃N₄ structure. The MnCo₂O₄ nanoparticles were displayed as spherical particles by TEM images and dispersed in a uniform way inside the g-C₃N₄ nanosheet. The synthesized nanocomposites in the form of MnCo₂O₄@g-C₃N₄ were examined as a new effective photocatalyst against glycerol as a source for H₂ production with visible light. The MnCo₂O₄ contents indicated a corroborative impact for the photocatalytic action related to the H₂ production process. A maximum H₂ production molecular value was observed (21,870 μmol·g^-1·h^-1) for a 1.5 wt % MnCo₂O₄@g-C₃N₄ nanocomposite as a considerable increase in its photocatalytic activity. The yields of H₂ are ∼55 and 23 times higher than those of g-C₃N₄ and MnCo₂O₄, respectively. Up to five times cycles of visible lighting were the maximum number of repeated cycles by which the 1.5 wt % MnCo₂O₄@g-C₃N₄ product showed higher stability and durability.

Syntheses, design strategies, and photocatalytic charge dynamics of metal–organic frameworks (MOFs): a catalyzed photo-degradation approach towards organic dyes

The presented review focuses on design strategies to develop tailor-made MOFs/CPs of main group, transition and inner-transition elements and their photocatalytic properties to decompose dyes in wastewater discharge and their photocatalytic mechanism.

Rare earth material CeO2 modified CoS2 nanospheres for efficient photocatalytic hydrogen evolution

The construction of a heterojunction promoted the separation of electrons and holes, so that CeO2/CoS2 exhibited an excellent hydrogen evolution performance.

Self-Assembly Hydrothermal Synthesis of Silverton-Type Polyoxometalate-Based Photocatalysts for Enhanced Degradation

The synthesis of some complex polyoxometalates (POMs) is critical to develop potential photocatalysts with high catalytic activity and selectivity. Here, we address this challenge by a hydrothermal self-assembly route to obtain a novel POM-based Co₄W₆O₂₁(OH)₂·4H₂O with a hierarchical microsphere structure. The Co₄W₆O₂₁(OH)₂·4H₂O crystallizes in the cubic space group Im3̅ with cell parameters: a = b = c = 12.878 Å, α = β = γ = 90°, and Z = 4. The structure is further characterized by X-ray diffraction, X-ray photoelectron spectroscopy, UV-vis spectroscopy, thermogravimetric analysis, and Fourier transform infrared spectra. After depositing Ag₂O nanoparticles on the 3D Co₄W₆O₂₁(OH)₂·4H₂O microsphere by photochemical synthesis, the Co₄W₆O₂₁(OH)₂·4H₂O/Ag₂O heterojunction presents enhanced photocatalytic activity for RhB compared with P25 and pristine Ag₂O. Moreover, we confirm the key role of holes for the Co₄W₆O₂₁(OH)₂·4H₂O/Ag₂O and put forward a possible mechanism for the photocatalytic degradation reaction.

Novel 2D hybrids composed of SnIn4S8 nanoplates on BiOBr nanosheets for enhanced photocatalytic applications

In the last ten years, bismuth oxybromide (BiOBr) has attracted wide attention due to its superior optoelectronic property. However, its practical application still suffers from slow carrier transport and high carrier recombination. Here we report a kind of novel tannum indium sulfide (SnIn4S8)/BiOBr hybrid prepared by a two-step hydrothermal method. The results showed that small amount of SnIn4S8 had no influence on the crystal phase of BiOBr, but the morphology could be regulated from nanosheet to nanoflower. Specially, SnIn4S8 exerted a slight effect on the light absorption and band gap of BiOBr. Importantly, SnIn4S8/BiOBr hybrids exhibited remarkable enhancement of the photocatalytic activity towards the degradation of rhodamin B (RhB) dye molecules. SnIn4S8/BiOBr-0.20 with 99.8% degradation efficiency had the highest photocatalytic activity within 40 min, while it was only 71.1% for pure BiOBr. The enhanced photocatalytic activity was mainly attributed to efficient interfacial transfer and low carrier recombination. This work will help us understand the photocatalytic mechanism of bismuth oxyhalide hybrids.

Facile Fabrication of Flower-Like BiOI/BiOCOOH p-n Heterojunctions for Highly Efficient Visible-Light-Driven Photocatalytic Removal of Harmful Antibiotics

Novel heterojunction photocatalysts with remarkable photocatalytic capabilities and durability for degrading recalcitrant contaminants are extremely desired; however, their development still remains quite challenging. In this study, a series of flower-like BiOI/BiOCOOH p–n heterojunctions were fabricated via a controlled in situ anion-exchange process. During the process, BiOI formation and even deposition on BiOCOOH microspheres with tight interfacial contact were realized. As expected, BiOI/BiOCOOH heterojunctions revealed remarkable enhancements in photocatalytic antibiotic degradation capacities under visible light irradiation compared with pristine BiOI and BiOCOOH. The best-performing BiOI/BiOCOOH heterojunction (i.e., IBOCH-2) showed much improved photocatalytic CIP degradation efficiency of approximately 81- and 3.9-fold greater than those of bare BiOI and BiOCOOH, respectively. The eminent photocatalytic performances were due not only to the enhanced capability in harvesting photon energies in visible light regions, but also the accelerated separation of electrons and holes boosted by the p–n heterojunction. Active species trapping tests demonstrated that superoxide free radicals (•O₂⁻) and photo-generated holes (h⁺) were major active species for CIP degradation. Recycling experiments verified the good durability of BIBO-2 over four runs. The facile in situ synthesis route and excellent performance endow flower-like BiOI/BiOCOOH heterojunctions with a promising potential for actual environmental remediation.

Review on nanoscale Bi-based photocatalysts

Nanoscale Bi-based photocatalysts are promising candidates for visible-light-driven photocatalytic environmental remediation and energy conversion. However, the performance of bulk bismuthal semiconductors is unsatisfactory. Increasing efforts have been focused on enhancing the performance of this photocatalyst family. Many studies have reported on component adjustment, morphology control, heterojunction construction, and surface modification. Herein, recent topics in these fields, including doping, changing stoichiometry, solid solutions, ultrathin nanosheets, hierarchical and hollow architectures, conventional heterojunctions, direct Z-scheme junctions, and surface modification of conductive materials and semiconductors, are reviewed. The progress in the enhancement mechanism involving light absorption, band structure tailoring, and separation and utilization of excited carriers, is also introduced. The challenges and tendencies in the studies of nanoscale Bi-based photocatalysts are discussed and summarized.

Efficient degradation of atrazine by BiOBr/UiO-66 composite photocatalyst under visible light irradiation: Environmental factors, mechanisms and degradation pathways

Atrazine, a typical herbicide, has caused extensive concern due to its wide application and persistance. In this work, a visible light responsive photocatalyst BiOBr/UiO-66 was synthesized and applied to the degradation of atrazine. The BiOBr/UiO-66 materials exhibited significantly enhanced photocatalytic performance on the degradation of atrazine under visible light irradiation compared to pure BiOBr. Moreover, the effects of typical environment factors (i.e. pH, common anions, inorganic cations and water matrix) on the degradation of atrazine were investigated extensively. Results showed that atrazine was degraded with the fastest rate at the strong acidity conditions of pH = 3.1 in the investigated pH region (3.1-9.4). The photocatalytic degradation of atrazine was obviously inhibited by HCO₃^- and SO₄^2-. However, Cl^- had negligible influence on the degradation of atrazine. Inorganic cations had little influence on the degradation of atrazine. Futhermore, the water matrix showed apparent impacts on the photocatalytic degradation of atrazine by BiOBr/UiO-66. In mineral water, tap water and river water, the removal efficiency of atrazine was evidently lower than that in pure water. The main active species that responsible for the degradation of atrazine by BiOBr/UiO-66 were determined to be ·O₂^- and h⁺. Ultimately, the degradation pathways of atrazine were proposed based on the intermediates detected by LC-MS/MS.