Photocatalytic mineralization of carbendazim pesticide by a visible light active novel type-II Bi2S3/BiFeO3 heterojunction photocatalyst

Studies on photocatalytic mineralization of organic pesticides by bimetallic Cu-Zn nanoparticles derived from Zingiber officinale Roscoe (ginger) using green chemistry approach

Compared to monometallic nanoparticles, bimetallic nanoparticle synthesis and characterization have attracted more attention due to their superior environmental protection properties. In this study, we discuss the preparation and characterization of Cu-Zn bimetallic nanoparticles using Zinger extract, as well as their potential role in photocatalytic degradation of carbendazim, chlorpyrifos, monocrotophos, and cypermethrin. Surface properties were assessed with SEM and TEM, while UV-VIS, XRD, FTIR, and fluorescence spectroscopy were used to characterize the materials. It was observed that higher pH conditions were more conducive to the development of stable Cu-Zn BMNPs with diameters ranging from 60 to 100 nm. UV-VIS spectroscopy showed that the Cu-Zn bimetallic nanoparticles photodegraded 53-95% of the pesticides, monocrotophos, chlorpyrifos, and carbendazim during the 24-72-h incubation period. A number of pesticides may be photocatalytically degraded by primary reactive radicals produced by nanoparticles. We propose that the use of bimetallic nanoparticles could be one alternative strategy for pesticide mineralization.

Carbendazim: Ecological risks, toxicities, degradation pathways and potential risks to human health

Carbendazim is a highly effective benzimidazole fungicide and is widely used throughout the world. The effects of carbendazim contamination on the biology and environment should be paid more attention. We reviewed the published papers to evaluate the biological and environmental risks of carbendazim residues. The carbendazim has been frequently detected in the soil, water, air, and food samples and disrupted the soil and water ecosystem balances and functions. The carbendazim could induce embryonic, reproductive, developmental and hematological toxicities to different model animals. The carbendazim contamination can be remediated by photodegradation and chemical and microbial degradation. The carbendazim could enter into human body through food, drinking water and skin contact. Most of the existing studies were completed in the laboratory, and further studies should be conducted to reveal the effects of successive carbendazim applications in the field.

In Situ Photodeposition of Cobalt Phosphate (CoHxPOy) on CdIn2S4 Photocatalyst for Accelerated Hole Extraction and Improved Hydrogen Evolution

The ternary metal sulfide CdIn₂S₄ (CIS) has great application potential in solar-to-hydrogen conversion due to its suitable band gap, good stability and low cost. However, the photocatalytic hydrogen (H₂) evolution performance of CIS is severely limited by the rapid electron-hole recombination originating from the slow photogenerated hole transfer kinetics. Herein, by simply depositing cobalt phosphate (CoH_xPO_y, noted as Co-Pi), a non-precious co-catalyst, an efficient pathway for accelerating the hole transfer process and subsequently promoting the H₂ evolution reaction (HER) activity of CIS nanosheets is developed. X-ray photoelectron spectroscopy (XPS) reveals that the Co atoms of Co-Pi preferentially combine with the unsaturated S atoms of CIS to form Co-S bonds, which act as channels for fast hole extraction from CIS to Co-Pi. Electron paramagnetic resonance (EPR) and time-resolved photoluminescence (TRPL) showed that the introduction of Co-Pi on ultrathin CIS surface not only increases the probability of photogenerated holes arriving the catalyst surface, but also prolongs the charge carrier's lifetime by reducing the recombination of electrons and holes. Therefore, Co-Pi/CIS exhibits a satisfactory photocatalytic H₂ evolution rate of 7.28 mmol g^-1 h^-1 under visible light, which is superior to the pristine CIS (2.62 mmol g^-1 h^-1) and Pt modified CIS (3.73 mmol g^-1 h^-1).

Gadolinium sesquisulfide anchored N-doped reduced graphene oxide for sensitive detection and degradation of carbendazim

Agriculture is having a major role in solving issues associated with food shortages across the globe. Carbendazim (CZM) is one of the fungicides which is commonly used in agriculture to grow crops in large quantities and fast. Monitoring CZM content is in high demand for environmental remediation. The present work deals with the synthesis of gadolinium sesquisulfide anchored Nitrogen-doped reduced graphene oxide (Gd₂S₃/NRGO) through a simple microwave-assisted method. X-ray diffraction and morphological studies confirm the formation of the nanocomposite. Gd₂S₃/NRGO showed enhanced activity both in electrochemical detection and light-driven degradation of CZM compared to Gd₂S₃ and NRGO. Gd₂S₃/NRGO modified glassy carbon electrode (GCE) exhibit a wide linear range of 0.01-450 μM CZM with 0.009 μM LOD using differential pulse voltammetry (DPV). Gd₂S₃/NRGO@GCE showed good selectivity, stability, and recovery (98.13-99.10%) in the river water sample. In addition, Gd₂S₃/NRGO has been explored towards the visible-light-induced degradation of CZM. The reactions conditions were optimized to achieve maximum efficiency. 94% of CZM was degraded within 90 min in presence of Gd₂S₃/NRGO. Mechanism of electrochemical redox reaction and degradation of CZM in presence of Gd₂S₃/NRGO has been explored to the maximum extent possible. Degradation intermediates were identified using LC-MS.

A Novel Cu2O/ZnO@PET Composite Membrane for the Photocatalytic Degradation of Carbendazim

The extremely high levels of water pollution caused by various industrial activities represent one of the most important environmental problems. Efficient techniques and advanced materials have been extensively developed for the removal of highly toxic organic pollutants, including pesticides. This study investigated the photocatalytic degradation of the fungicide carbendazim (Czm) using composite track-etched membranes (TeMs) in an aqueous solution. Copper(I) oxide (Cu₂O) and zinc oxide (ZnO) microtubes (MTs) were prepared using an electroless template deposition technique in porous poly(ethylene terephthalate) (PET) TeMs with nanochannels with a density of 4 × 10⁷ pores/cm⁻² and diameter of 385 ± 9 nm to yield Cu₂O@PET and ZnO@PET composite membranes, respectively. A mixed Cu₂O/ZnO@PET composite was prepared via a two-step deposition process, containing ZnO (87%) and CuZ (13%) as crystalline phases. The structure and composition of all composite membranes were elucidated using scanning electron microscopy (SEM), atomic force microscopy (AFM), energy-dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) techniques. Under UV–visible light irradiation, the Cu₂O/ZnO@PET composite displayed enhanced photocatalytic activity, reaching 98% Czm degradation, higher than Cu₂O@PET and ZnO@PET composites. The maximum Czm degradation efficiency from aqueous solution was obtained at an optimal pH of 6 and contact time of 140 min. The effects of various parameters such as temperature, catalyst dosage and sample exposure time on the photocatalytic degradation process were studied. The degradation reaction of Czm was found to follow the Langmuir–Hinshelwood mechanism and a pseudo-first order kinetic model. The degradation kinetics of Czm accelerated with increasing temperature, and the activation energy (E_a) levels were calculated as 11.9 kJ/mol, 14.22 kJ/mol and 15.82 kJ/mol for Cu₂O/ZnO@PET, ZnO@PET and Cu₂O@PET composite membranes, respectively. The reusability of the Cu₂O/ZnO@PET catalyst was also investigated at different temperatures for 10 consecutive runs, without any activation or regeneration processes. The Cu₂O/ZnO@PET composite exhibited degradation efficiency levels of over 50% at 14 °C and over 30% at 52 °C after 5 consecutive uses.

Degradation of carbendazim in aqueous solution by different settings of photochemical and electrochemical oxidation processes

The present study analyzed the performance of photochemical and electrochemical techniques in the degradation and mineralization of the pesticide carbendazim (CBZ). Direct photolysis (DP), heterogeneous photocatalysis (HP), photoelectrocatalysis (PEC), and electrochemical oxidation (EO) were tested, and the influence of UV radiation, current density (j), and supporting electrolyte concentration were evaluated. The results suggest that CBZ is only degraded by DP when UV-C_254nm is used. For HP, the CBZ degradation was observed both when UV-A_365nm or UV-C_254nm were used, which is related to the reactive oxygen species (ROS) formed by the photocatalytic activity (photon-ROS). Neither DP nor HP were able to mineralize CBZ, demonstrating its resistance to photomediated processes. For EO, regardless of the j, there were higher CBZ degradation and mineralization than those observed when using DP and HP. The increase in the supporting electrolyte concentration (Na₂SO₄) did not affect the levels of degradation and mineralization of CBZ. Concerning the PEC, a CBZ mineralization of 52.2% was accomplished. These findings demonstrate that the EO is the main pathway for CBZ mineralization, suggesting an additional effect of the electro-ROS on the photon-ROS and UV-C_254nm. The values of mineralization, kinetics, and half-life show that PEC UV-C_254nm with a j of 15 mA cm^-2 was the best setting for the degradation and mineralization of CBZ. However, when the values of specific energy consumption were considered for industrial applications, the use of EO with a j of 3 mA cm^-2 and 4 g L^-1 of Na₂SO₂ becomes more attractive. The assessment of by-products formed after this best cost-efficient treatment setting revealed the presence of aromatic and aliphatic compounds from CBZ degradation. Acute phytotoxicity results showed that the presence of sodium sulfate can be a representative factor regarding the toxicity of samples treated in electrochemical systems.

Recent advances in structural modifications of photo-catalysts for organic pollutants degradation - A comprehensive review

Over the last few years, industrial and anthropogenic activities have increased the presence of organic pollutants such as dyes, herbicides, pesticides, analgesics, and antibiotics in the water that adversely affect human health and the environment worldwide. Photocatalytic treatment is considered a promising, economical, effective, and sustainable process that utilizes light energy to degrade the pollutants in water. However, certain drawbacks like rapid recombination and low migration capability of photogenerated electrons and holes have restricted the use of photo-catalysts in industries. Hence, despite the abundance of lab-scale research, the technology is still not much commercialized in the mainstream. Several structural modifications in the photo-catalysts have been adopted to enhance the pollutant degradation performance to overcome the same. In this context, the present review article outlines the different advanced heterostructures synthesized to date for improved degradation of three major organic pollutants: antibiotics, dyes, and pesticides. Moreover, the article also emphasizes the degradation kinetics of photo-catalysts and the publication trend in the past decade along with the roadblocks preventing the transfer of technology from the laboratory to industry and new age photo-catalysts for the profitable implications in industrial sectors.

Microwave-assisted fabrication of g-C3N4 nanosheets sustained Bi2S3 heterojunction composites for the catalytic reduction of 4-nitrophenol

In this work, we report a stable g-C₃N₄, Bi₂S₃, and g-C₃N₄/Bi₂S₃ composite catalysts were prepared via a facile one-pot microwave-assisted method and characterized. The orthorhombic phase and nearly spherical shape of the particles with an average diameter of 5-25 nm of g-C₃N₄/Bi₂S₃ composite were obtained from XRD and TEM. The composite also exhibits a high surface area (32.15 m²/g), which may provide convenient transportation and diffusion for substrate molecule. The optical studies were displayed the g-C₃N₄/Bi₂S₃ composite has a sharp absorption band in the visible region, higher charge separation, and reduced recombination rate. These results show that the Bi₂S₃ NPs have good crystallinity and are uniformly deposited on the surface of the g-C₃N₄ sheet. The catalytic performance of the g-C₃N₄/Bi₂S₃ composite for the reduction of 4-NP to 4-AP was exhibited approximately 100%, which is 1.48 and 2.34 times higher than the Bi₂S₃ and g-C₃N₄ catalysts, respectively. The pseudo-first-order rate constant was estimated as 1.648 × 10 ^-2 min^-1 for the reduction of 4-NP using g-C₃N₄/Bi₂S₃ composite in 1 h reaction time. The effect of catalyst dosage (0-30 mg) was also investigated for the reduction of 4-NP using g-C₃N₄/Bi₂S₃ composite catalyst. Moreover, the reusability of the g-C₃N₄/Bi₂S₃ composite was exhibited a better reduction of the 4-NP even after 5 cycles and it was found that 8% reduction in the initial reduction rate. The obtained results from this study show that g-C₃N₄/Bi₂S₃ composite has the potential efficiency and stability to make it an ideal catalyst for the reduction of toxic effluents and wastewater treatment.

Structural Insights on 2D Gadolinium Tungstate Nanoflake: A Promising Electrocatalyst for Sensor and Photocatalyst for the Degradation of Postharvest Fungicide (Carbendazim)

Gadolinium tungstate (Gd₂(WO₄)₃) has acquired much attention owing to its exclusive transport properties and excellent thermal and chemical stability. In this work, we demonstrate that two-dimensional (2D) gadolinium tungstate nanoflakes (GW Nfs) are synthesized by a coprecipitation method and represent novel architectures for efficient catalysis, which could be used in electrochemical sensing and photocatalytic degradation of the postharvest fungicide carbendazim (CBZ). The physicochemical properties of GW Nfs were studied by using XRD, Raman, TEM, EDX, and XPS, which show the formation of GW as a nanoflake-like structure with a well crystallized nature. The as-prepared GW Nfs revealed an admirable electrochemical response for CBZ detection with an LOD of 0.005 μM, a wide-ranging linear response of 0.02 to 40 μM, and a notable sensitivity of 0.39 μA μM^-1 cm^-2. Furthermore, the GW-Nf-modified electrode has a good recovery for CBZ in the study of real samples such as rice and soil washed water samples. Moreover, GW Nfs have a promising photocatalytic activity for CBZ degradation. The GW Nfs could degrade CBZ at greater than 98% efficiency and mineralize above 74% of the CBZ molecules in the presence of visible light irradiation with superior stability even after many cycles. Subsequently, the electrochemical and photocatalytic mechanisms were provided in detail.