Chitosan as a biodegradable heterogeneous catalyst for Knoevenagel condensation between benzaldehydes and cyanoacetamide

Impact of chitosan extracted from shrimp shells on the shrinkage and mechanical properties of cement-based composites using dendritic fibrous nanosilica

Dendritic fibrous nanosilica (DFNS) was functionalized using microcrystalline chitosan, derived from shrimp exoskeletons, to act as a robust anchor, resulting in DFNS@Chitosan. In order to prevent the restacking of chitosan sheets, the supramolecular polymerized chitosan not only served as a spacer but was also incorporated into cement-based composites. The physical-chemical characteristics of DFNS@Chitosan were assessed through various analytical techniques such as TEM, SEM, TGA, FTIR, AFM, XPS, and EDX. The potency and auto-induced contraction of Cement-based composite materials fortified with DFNS@Chitosan were probed. The incorporation of DFNS@Chitosan resulted in an increase in both compressive and interfacial stretching potency of the cement-based composites. Furthermore, the presence of DFNS@Chitosan effectively inhibited the occurrence of auto-induced contraction in the cement-based paste. This research endeavor is anticipated to promote an alternative utilization of DFNS and shrimp waste shells in the development of sustainable building materials.

Efficient synthesis of symmetrically substituted pyridines and substituted alkenes through green and heterogeneous catalysis with zinc phosphate

This study presents a new environmentally sustainable catalytic method for the synthesis of symmetrically substituted pyridine derivatives and substituted alkene derivatives using zinc phosphate (Zn3(PO4)2·4H2O) as a non-toxic and green heterogeneous catalyst. The catalytic support was prepared by a co-precipitation method, and it was applied for the first time as a heterogeneous catalyst in organic synthesis. Trisubstituted pyridine derivatives were prepared with excellent yields (82-94%) via a three-component, one-pot synthesis of aromatic aldehydes, substituted acetophenones, and ammonium acetate in the presence of 0.4 mol% of Zn3(PO4)2·4H2O using an ethanol/water (4/1) mixture as the solvent, while substituted alkenes were synthesized with up to 90% yield using the prepared catalyst. The experimental results demonstrate the efficiency of these new catalytic syntheses that present various advantages such as short reaction times, excellent yields, and an environmentally friendly profile.

Palladated Cyclodextrin Nanosponge-Alginate Dual Bead as an Efficient Catalyst for Hydrogenation of Nitroarenes in Aqueous Solution

In this study, we present a novel composite material consisting of β-cyclodextrin nanosponge and sodium alginate, used as a support for the immobilization of palladium (Pd) nanoparticles. The composite alginate-cyclodextrin nanosponge beads were prepared, taking advantage of the 3D polymeric network and β-cyclodextrin cavity of the nanosponge. These beads exhibited excellent encapsulation capabilities for hydrophobic substrates, allowing their transfer in aqueous media. The cyclodextrin nanosponge served as a stabilizer for Pd nanoparticles and facilitated phase transfer. Additionally, the sodium alginate bead contributed to the robustness of the structure and improved the recovery and recyclability of the composite material. Comparative studies with control catalysts confirmed the beneficial effect of incorporating cyclodextrin nanosponge within alginate beads, particularly for more hydrophobic substrates. Optimization of reaction conditions revealed that employing 0.03 g of catalyst per mmol of nitroarene at 45 °C resulted in the maximum yield within 90 min. Evaluation of the substrate scope demonstrated the hydrogenation capability of various substrates with different electronic properties under the developed protocol. Notably, the nitro group was selectively reduced in substrates featuring competing functionalities. Furthermore, the recyclability and stability of the composite catalyst were confirmed, making it a promising candidate for sustainable catalysis.

Highly economic and waste valorization strategy for multicomponent and Knoevenagel reactions using water extract of tamarind seed ash

The application of solid organic waste-originated products in the preparation of synthetically and biologically significant compounds in aqueous media or pure water is a highly desired task in chemical synthesis that shows an effective solution to the circular economy and sustainable environment. In this article, we describe our research on the development of highly economic and sustainable protocols for the synthesis of biologically important oxygen-heterocycles (using a multicomponent reaction) and synthetically important olefins (via the Knoevenagel condensation reaction) using water extract of tamarind seed ash (WETS) as catalyst and aqueous reaction medium. The reactions are carried out at room temperature (RT) under toxic/problematic/volatile organic solvent-free conditions. Products of the current methods have been purified by using recrystallization technique. WETS was characterized from its FTIR, powder XRD, SEM, and EDAX data. Problematic and non-renewable solvents were avoided throughout the process from their synthesis to purification. The utilization of solid organic waste-originated catalyst and aqueous media, avoid of non-renewable substances as catalysts, media, separation solvents and promoters, and unobligating heating conditions can surely attract the attention of chemists towards exploring the waste-based products in chemical transformations.

Chitosan-supported metal nanocatalysts for the reduction of nitroaromatics

The second most abundant natural polymer in the earth's crust is chitosan (CS). The unique physical, chemical, structural, and mechanical features of this natural polymer have led to its increased application in a variety of fields such as medicine, catalysis, removal of pollutants, etc. To eliminate various pollutants, it is preferable to employ natural compounds as their use aids the removal of contaminants from the environment. Consequently, employing CS to eliminate contaminants is a viable choice. For this aim, CS can be applied as a template and support for metal nanoparticles (MNPs) and prevent the accumulation of MNPs as well as a reducing and stabilizing agent for the fabrication of MNPs. Among the pollutants present in nature, nitro compounds are an important and wide category of biological pollutants. 4-Nitrophenol (4-NP) is one of the nitro pollutants. There are different ways for the removal of 4-NP, but the best and most effective method for this purpose is the application of a metallic catalyst and a reducing agent. In this review, we report the recent developments regarding CS-supported metallic (nano)catalysts for the reduction of nitroaromatics such as nitrophenols, nitroaniline compounds, nitrobenzene, etc. in the presence of reducing agents. The metals investigated in this study include Ag, Au, Ni, Cu, Ru, Pt, Pd, etc.

Heteroployacid on the composite of boehmite and polyionic liquid as a catalyst for alcohol oxidation and tandem alcohol oxidation Knoevenagel condensation reactions

Using boehmite as an available and low-cost natural compound, a bi-functional catalytic composite is prepared through vinyl-functionalization of boehmite, followed by polymerization with the as-prepared bis-vinylimidazolium bromide ionic liquid and supporting of phosphotungstic acid. The catalyst was characterized via ICP, XRD, TGA, FTIR, SEM/EDS and elemental mapping analysis and applied for promoting alcohol oxidation reaction and one-pot tandem alcohol oxidation/Knoevenagel condensation reaction in aqueous media under mild reaction condition. The results indicated high catalytic activity of the catalyst for both reactions. This protocol showed high generality and aliphatic, aromatic and heterocyclic alcohols could be applied as substrates to furnish the corresponding products in high to excellent yields. Furthermore, hot filtration test confirmed true heterogeneous nature of the catalysis. The catalyst could also be recovered readily and reused for at least five runs of the reaction with low loss of the activity and phosphotungstic acid leaching upon each run.

Pd on cyclotriphosphazen-hexa imine decorated boehmite as an efficient catalyst for hydrogenation of nitro arenes under mild reaction condition

Cyclotriphosphazen-hexa imine ligand was prepared through successive reactions of phosphonitrilchloride trimer with 4-hydroxybenzaldehyde and (3-aminopropyl) triethoxy silane. The as-prepared ligand was then covalently grafted on boehmite to furnish an efficient support for the immobilization of Pd nanoparticles and synthesis of a novel heterogeneous catalyst for hydrogenation of nitro arenes. The catalytic tests revealed that the catalyst had excellent catalytic activity for hydrogenation of various nitro arenes with different steric and electronic features under mild reaction condition in aqueous media. Noteworthy, the catalyst was highly selective and in the substrates with ketone or aldehyde functionalities, reduction of nitro group was only observed. The catalyst was also recyclable and only slight loss of activity was detected after each recycling run. Hot filtration test also approved true heterogeneous nature of catalysis.

Chitosan-EDTA-Cellulose network as a green, recyclable and multifunctional biopolymeric organocatalyst for the one-pot synthesis of 2-amino-4H-pyran derivatives

In this research, cellulose grafted to chitosan by EDTA (Cs-EDTA-Cell) bio-based material is reported and characterized by a series of various methods and techniques such as FTIR, DRS-UV–Vis, TGA, FESEM, XRD and EDX analysis. In fact, the Cs-EDTA-Cell network is more thermally stable than pristine cellulose or chitosan. There is a plenty of both acidic and basic sites on the surface of this bio-based and biodegradable network, as a multifunctional organocatalyst, to proceed three-component synthesis of 2-amino-4H-pyran derivatives at room temperature in EtOH. The Cs-EDTA-Cell nanocatalyst can be easily recovered from the reaction mixture by using filtration and reused for at least five times without significant decrease in its catalytic activity. In general, the Cs-EDTA-Cell network, as a heterogeneous catalyst, demonstrated excellent catalytic activity in an environmentally-benign solvent to afford desired products in short reaction times and required simple experimental and work-up procedure compared to many protocols using similar catalytic systems.

Diamino group-functionalized Zr-based metal-organic framework for fluorescence sensing of free chlorine in the aqueous phase and Knoevenagel condensation

We developed a porous diamino group-functionalized Zr(IV) metal-organic framework (MOF). The synthesized MOF has a similar structure to DUT-52 (DUT = Dresden University of Technology), which has a face-centered cubic structure with an Fm3̄m space group. The synthesized material (DUT-52-(NH2)2-1) was solvent exchanged with methanol (MeOH) and activated at 100 °C overnight. Both the as-synthesized and activated materials (DUT-52-(NH2)2-1') are thermally stable until 300 °C. The Brunauer-Emmett-Teller (BET) surface area of DUT-52-(NH2)2-1' was found to be 413 m² g^-1. DUT-52-(NH2)2-1' showed a significant quenching of fluorescence response after coming in contact with free chlorine (ClO^-) in an aqueous medium. The selectivity of DUT-52-(NH2)2-1' towards ClO^- was not significantly hampered in the presence of any competitive ion. The limit of detection (LOD) value was found to be 0.08 μM in phosphate-buffered saline (PBS, pH = 7.4). DUT-52-(NH2)2-1' is recyclable and very sensitive towards ClO^-. Moreover, the paper strip method was developed for onsite identification of ClO^-. Furthermore, the catalytic activity of DUT-52-(NH2)2-1' was tested in the Knoevenagel condensation between benzaldehyde and cyanoacetamide. The experimental results clearly indicate that DUT-52-(NH2)2-1' exhibits high activity with very high selectivity towards condensation products. The solid was reusable three times with no decay in its activity, as evidenced by powder X-ray diffraction (PXRD), field emission scanning electron microscopy (FE-SEM) and fourier transform infrared (FT-IR).

An Overview of Metal-free Sustainable Nitrogen-based Catalytic Knoevenagel Condensation Reaction ‎

Knoevenagel condensation reaction counts as a vital condensation in organic chemistry due to the synthesis of valuable intermediates, ‎heterocycles, and fine chemicals from commercially available reactants through forming new C=C...

Synthesis and Applications of Carbohydrate-Based Organocatalysts

Organocatalysis is a very useful tool for the asymmetric synthesis of biologically or pharmacologically active compounds because it avoids the use of noxious metals, which are difficult to eliminate from the target products. Moreover, in many cases, the organocatalysed reactions can be performed in benign solvents and do not require anhydrous conditions. It is well-known that most of the above-mentioned reactions are promoted by a simple aminoacid, l-proline, or, to a lesser extent, by the more complex cinchona alkaloids. However, during the past three decades, other enantiopure natural compounds, the carbohydrates, have been employed as organocatalysts. In the present exhaustive review, the detailed preparation of all the sugar-based organocatalysts as well as their catalytic properties are described.

Homogeneous Catalyzed Valorization of Furanics: A Sustainable Bridge to Fuels and Chemicals

The development of efficient biomass valorization is imperative for the future sustainable production of chemicals and fuels. Particularly, the last decade has witnessed the development of a plethora of effective and selective transformations of bio-based furanics using homogeneous organometallic catalysis under mild conditions. In this review, we describe some of the advances regarding the conversion of target furanics into value chemicals, monomers for high-performance polymers and materials, and pharmaceutical key intermediates using homogeneous catalysis. Finally, the incorporation of furanic skeletons into complex chemical architectures by multifunctionalization routes is also described.

Catalytic C-H Bond Activation and Knoevenagel Condensation Using Pyridine-2,3-Dicarboxylate-Based Metal-Organic Frameworks

Three 1D coordination polymers (CPs) [M(pdca)(H2O)2] n (M = Zn, Cd, and Co; 1-3), and a 3D coordination framework {[(CH3)2NH2][CuK(2,3-pdca)(pa)(NO3)2]} n (4) (2,3-pdca = pyridine-2,3-dicarboxylate and pa = picolinic acid), have been synthesized adopting a solvothermal reaction strategy. The CPs have been thoroughly characterized using various spectral techniques, that is, elemental analyses, FT-IR, TGA, DSC, UV/vis, and luminescence. Structural information on 1-4 was obtained by PXRD and X-ray single-crystal analyses, whereas morphological insights were attained through FESEM, AFM, EDX, HRTEM, and BET surface area analyses. Roughness parameters were calculated from AFM analysis, whereas dimensions of small domains and interplanar spacing were defined with the aid of HRTEM. CPs 1-3 are 1D isostructural networks, whereas 4 is a 3D framework. Moreover, 1-4 display moderate luminescence at rt. In addition, 1-4 have been applied as economic and efficient porous catalysts for the Knoevenagel condensation reaction and C-H bond activation under mild conditions with good yields (95-98 and 97-99%), respectively. Notably, 1-3 can be reused up to seven cycles, whereas 4 can be reused up to five catalytic cycles with retained catalytic efficiency. Relative catalytic efficacy toward the Knoevenagel condensation reaction follows in the order 2 > 1 > 3 > 4, whereas 2 > 4 > 1 > 3 for C-H activation. The present result demonstrates synthetic, structural, optical, morphological, and catalytic aspects of 1-4.

Recent Advances on Fabrication of Polymeric Composites Based on Multicomponent Reactions for Bioimaging and Environmental Pollutant Removal

As the core of polymer chemistry, manufacture of functional polymers is one of research hotspots over the past several decades. Various polymers are developed for diverse applications due to their tunable structures and unique properties. However, traditional step-by-step preparation strategies inevitably involve some problems, such as separation, purification, and time-consuming. The multicomponent reactions (MCRs) are emerging as environmentally benign synthetic strategies to construct multifunctional polymers or composites with pendant groups and designed structures because of their features, such as efficient, fast, green, and atom economy. This mini review summarizes the latest advances about fabrication of multifunctional fluorescent polymers or adsorptive polymeric composites through different MCRs, including Kabachnik-Fields reaction, Biginelli reaction, mercaptoacetic acid locking imine reaction, Debus-Radziszewski reaction, and Mannich reaction. The potential applications of these polymeric composites in biomedical and environmental remediation are also highlighted. It is expected that this mini-review will promote the development preparation and applications of functional polymers through MCRs.

Selective Utilization of N-acetyl Groups in Chitin for Transamidation of Amines

The selective transformation of chitin into various renewable N-containing chemicals and medicines has attracted increasing attention. However, the N-acetyl groups in chitin construct strong hydrogen bond networks, which restricts its depolymerization and transformation. The selective conversion of robust chitin commonly requires considerable base catalysts to remove the N-acetyl group as a byproduct in advance, which is non-compliance with the principle of atomic economy. Herein, for the first time we demonstrate a novel approach to achieve the selective utilization of the N-acetyl group in chitin for transamidation of chitin with amines. A series of amine derivatives, mainly including aliphatic amine, cyclic amine and functionalized aromatic amine, could be selectively converted into the corresponding amide products frequently found in pharmaceuticals. Furthermore, the solid residue after removing the acetyl group (denoted as De-chitin) with the sufficient exposure of -NH2 groups as a solid base catalyst shows excellent performance in the aldol condensation reaction of furfural and acetone to produce fuel precursors. Our process provides a strategy that exploiting every functional group adequately in substrates to obtain value-added chemicals.

Pristine and modified chitosan as solid catalysts for catalysis and biodiesel production: A minireview

Chitosan is one of the readily available polymers with relatively high abundance, biodegradable and sustainable materials with divergent functional groups that are employed in broad range of applications. Chitosan is widely used in many fields like adsorption, drug carrier for therapeutic activity, environmental remediation, drug formulation and among others. One of the unique features of chitosan is that it can be transformed to other forms like beads, films, flakes, sponges and fibres depending upon the applications. This review is aimed at showing the potential applications of chitosan and its modified solids in organic transformations. The number of existing articles is organized based on the nature of materials and subsequently with the types of reactions. After a brief description on the structural features of chitosan, properties, characterization methods including various analytical/microscopic techniques and some of the best practices to be followed in catalysis are also discussed. The next section of this review describes the catalytic activity of native chitosan without any modifications while the subsequent sections provide the catalytic activity of chitosan derivatives, chitosan covalently modified with metal complexes/salts through linkers and chitosan as support for metal nanoparticles (NPs). These sections discuss number of organic reactions that include Knoevenagel condensation, oxidation, reduction, heterocycles synthesis, cross-coupling reactions and pollutant degradation among others. A separate section provides the catalytic applications of chitosan and its modified forms for the production of fatty acid methyl esters (FAME) through esterification/transesterification reactions. The final section summarizes our views on the future directions of this field in the coming years.

Improvement of the catalytic performance of hybrid nanocomposite based on phosphate-benzimidazole in Knoevenagel condensation

In this work, we have developed a simple and very effective experimental strategy for the reaction of Knoevenagel via the condensation of aromatic aldehydes substituted with active methylene compounds in the presence of hybrid nanocomposites xMCl₂-yNaPO₃ (MCl₂ = 2,2′-dibenzimidazolyl butane dichlorhydrates), under ecological conditions. The Phosphate-Benzimidazole hybrid nanocomposite as heterogeneous catalysts has demonstrated a high catalytic activity for the Knoevenagel condensation in ethanol as an ecological solvent. It has several advantages such as light reaction conditions, a simple and ecological working procedure. Meanwhile, xMCl₂-yNaPO₃ can be recovered by simple filtration and this catalytic system having an interesting lifetime (five cycles) with no decrease in activity.