Oxidation of sulfur components in diesel fuel using Fe-TAML® catalysts and hydrogen peroxide

Self-Assembled FeIII-TAML-Based Magnetic Nanostructures for Rapid and Sustainable Destruction of Bisphenol A

This study focused on constructing iron(III)-tetraamidomacrocyclic ligand (FeIII-TAML)-based magnetic nanostructures via a surfactant-assisted self-assembly (SAS) method to enhance the reactivity and recoverability of FeIII-TAML activators, which have been widely employed to degrade various organic contaminants. We have fabricated FeIII-TAML-based magnetic nanomaterials (FeIII-TAML/CTAB@Fe3O4, CTAB refers to cetyltrimethylammonium bromide) by adding a mixed solution of FeIII-TAML and NH3·H2O into another mixture containing CTAB, FeCl2 and FeCl3 solutions. The as-prepared FeIII-TAML/CTAB@Fe3O4 nanocomposite showed relative reactivity compared with free FeIII-TAML as indicated by decomposition of bisphenol A (BPA). Moreover, our results demonstrated that the FeIII-TAML/CTAB@Fe3O4 composite can be separated directly from reaction solutions by magnet adsorption and reused for at least four times. Therefore, the efficiency and recyclability of self-assembled FeIII-TAML/CTAB@Fe3O4 nanostructures will enable the application of FeIII-TAML-based materials with a lowered expense for environmental implication.

Efficient Diesel Desulfurization by Novel Amphiphilic Polyoxometalate-Based Hybrid Catalyst at Room Temperature

Amphiphilic hybrid catalysts were prepared by modifying [SMo12O40]2− with tetrabutylammonium bromide (TBAB), 1-butyl-3-methylimidazole bromide (BMIMBr) and octadecyl trimethyl ammonium bromide (ODAB), respectively. The prepared catalysts were characterized by IR, XRD, SEM, TG and XPS. The desulfurization performance of the catalysts was investigated in model oil and actual diesel using hydrogen peroxide (H2O2) as an oxidant and acetonitrile as an extractant. All catalysts exhibited favorable activity for removing sulfur compounds at room temperature. Dibenzothiophene (DBT) can be nearly completely removed using SMo12O402−-organic catalysts within a short reaction time. For different sulfur compounds, the [TBA]2SMo12O40 catalyst showed a better removal effect than the [BMIM]2SMo12O40 and [ODA]2SMo12O40 catalyst. The [TBA]2SMo12O40 dissolved in extraction solvent could be reused up to five times in an oxidative desulfurization (ODS) cycle with no significant loss of activity. The [BMIM]2SMo12O40 performed as a heterogeneous catalyst able to be recycled from the ODS system and maintained excellent catalytic activity. The catalysts showed a positive desulfurization effect in real diesel treatment. Finally, we described the ODS desulfurization mechanism of DBT using SMo12O402−-organic hybrid catalysts. The amphiphilic hybrid catalyst cation captures DBT, while SMo12O402− reacts with the oxidant H2O2 to produce peroxy-active species. DBT can be oxidized to its sulfone by the action of peroxy-active species to achieve ODS desulfurization.

Transition Metal Phosphide Nanoarchitectonics for Versatile Organic Catalysis

Transition metal phosphides (TMP) posses unique physiochemical, geometrical, and electronic properties, which can be exploited for different catalytic applications, such as photocatalysis, electrocatalysis, organic catalysis, etc. Among others, the use of TMP for organic catalysis is less explored and still facing many complex challenges, which necessitate the development of sustainable catalytic reaction protocols demonstrating high selectivity and yield of the desired molecules of high significance. In this regard, the controlled synthesis of TMP-based catalysts and thorough investigations of underlying reaction mechanisms can provide deeper insights toward practical achievement of desired applications. This review aims at providing a comprehensive analysis on the recent advancements in the synthetic strategies for the tailored and tunable engineering of structural, geometrical, and electronic properties of TMP. In addition, their unprecedented catalytic potential toward different organic transformation reactions is succinctly summarized and critically analyzed. Finally, a rational perspective on future opportunities and challenges in the emerging field of organic catalysis is provided. On the account of the recent achievements accomplished in organic synthesis using TMP, it is highly anticipated that the use of TMP combined with advanced innovative technologies and methodologies can pave the way toward large scale realization of organic catalysis.

A mechanistic switch in C−H bond activation by elusive FeV(O)(TAML) reaction intermediate: A theoretical study

The divergent behavior of C−H bond oxidations of aliphatic substrates compared to those of aromatic substrates shown in Gupta's experiment was mechanistically studied herein by means of density functional theory calculations. Our calculations reveal that such difference is caused by different reaction mechanisms between two kinds of substrates (the aliphatic cyclohexane, 2,3-dimethylbutane and the aromatic toluene, ethylbenzene and cumene). For the aliphatic substrates, C−H oxidation by the oxidant FeV(O)(TAML) is a hydrogen atom transfer process; whereas for the aromatic substrates, C−H oxidation is a proton-coupled electron transfer (PCET) process with a proton transfer character on the transition state, that is, a proton-coupled electron transfer process holding a proton transfer-like transition state (PCET(PT)). This difference is caused by the strong π− π interactions between the tetra-anionic TAML ring and the phenyl ring of the aromatic substrates, which has a “pull” effect to make the electron transfer from substrates to the Fe=O moiety inefficient.

Detoxification of oil refining effluents by oxidation of naphthenic acids using TAML catalysts

The environmental problem stemming from toxic and recalcitrant naphthenic acids (NAs) present in effluents from the oil industry is well characterized. However, despite the numerous technologies evaluated for their destruction, their up-scaling potential remains low due to high implementation and running costs. Catalysts can help cutting costs by achieving more efficient reactions with shorter operating times and lower reagent requirements. Therefore, we have performed a laboratory investigation to assess iron-TAML (tetra-amido macrocyclic ligand) activators to catalyze the oxidation of NAs by activating hydrogen peroxide - considered environmentally friendly because it releases only water as by-product - under ultra-dilute conditions. We tested Fe-TAML/H₂O₂ systems on (i) model NAs and (ii) a complex mixture of NAs in oil refining wastewater (RWW) obtained from a refining site in Colombia. Given the need for cost-effective solutions, this preliminary study explores sub-stoichiometric H₂O₂ concentrations for NA mineralization in batch mode and, remarkably, delivers substantial removal of the starting NAs. Additionally, a 72-h semi-batch process in which Fe-TAML activators and hydrogen peroxide were added every 8 h achieved 90-95% removal when applied to model NAs (50 mg L^-1) and a 4-fold reduction in toxicity towards Aliivibrio fischeri when applied to RWW. Chemical characterization of treated RWW showed that Fe-TAML/H₂O₂ treatment (i) reduced the concentration of the highly toxic O₂ NAs, (ii) decreased cyclized constituents in the mixture, and (iii) preferentially degraded higher molecular weight species that are typically resistant to biodegradation. The experimental findings, together with the recent development of new TAML catalysts that are far more effective than the TAML catalysts deployed herein, constitute a foundation for cost-effective treatment of NA-contaminated wastewater.

Oxidative desulfurization of dibenzothiophene catalyzed by molybdenum dioxide immobilized on zirconia-modified silica

MoO₂/ZrO₂–SiO₂ catalysts show high activity in the oxidative desulfurization reaction, and the desulfurization rate can reach 99.96%.

Metabisulfite as an Unconventional Reagent for Green Oxidation of Emerging Contaminants Using an Iron-Based Catalyst

In this work, contaminants of emerging concern were catalytically degraded in the homogeneous phase with the use of unconventional green reagents. Three reagents, namely, sulfite, metabisulfite, and persulfate, were tested and compared with conventional hydrogen peroxide in the degradation process activated by Fe-TAML. The latter is a biodegradable, homogeneous tetra-amido macrocyclic ligand catalyst containing iron(III). Metabisulfite showed the highest efficiency among the three tested reagents, and its reactivity was similar to that of H₂O₂. However, metabisulfite is a safer and cleaner reagent compared to H₂O₂. A comprehensive study of the activity of metabisulfite with Fe-TAML was carried out toward the oxidative degradation of eight contaminants of emerging concern. The catalytic process was tested at different pH values (7, 9, and 11). Metabisulfite showed the highest activity at pH 11, completely degrading some of the tested micropollutants, but in several cases, the system was active at pH 9 as well. In particular, metabisulfite showed the best efficiency toward phenolic compounds. A preliminary study on the reaction mechanism and the nature of the active species in the Fe-TAML/metabisulfite system was also conducted, highlighting that a high-valent iron-oxo species might be involved in the degradation pathways.

Effect of Preparation Method on Ag Modified Ti-HMS Catalyst Structure and Catalytic Oxidative Desulfurization Performance

Ag modified mesoporous molecular sieves Ti-HMS were prepared by in-situ synthesis (Ag/Ti-HMS-I), deposition-precipitation method (Ag/Ti-HMS-D) and ultrasound-assisted impregnation methods (Ag/Ti-HMS-U), respectively. The catalytic performance of catalysts in the oxidative desulfurization(ODS) of benzothiophene with hydrogen peroxide (H2O2) has been investigated. The physicochemical properties of the catalysts were characterized by XRD, SEM, BET and FT-IR techniques. Experimental results showed that the catalyst Ag/Ti-HMS-U exhibited the best catalytic activity, and this maybe because the catalyst possessed relatively good mesoporous structure and high Ag dispersion. Under the best operating condition for the catalytic oxidative desulfurization: temperature 60 °C, atmospheric pressure, 0.1 g catalysts, 8 molar ratio of hydrogen peroxide to sulfur, using acetonitrile as extraction solvent for double extraction, the sulfur content in model diesel fuel (MDF) was reduced from 800 ppm to 17 ppm with 97.8% of total sulfur after 1 h.

Fe(III)-Doped g-C3N4 Mediated Peroxymonosulfate Activation for Selective Degradation of Phenolic Compounds via High-Valent Iron-Oxo Species

Herein, we proposed a new peroxymonosulfate (PMS) activation system employing the Fe(III) doped g-C₃N₄ (CNF) as catalyst. Quite different from traditional sulfate radical-based advanced oxidation processes (SR-AOPs), the PMS/CNF system was capable of selectively degrading phenolic compounds (e.g., p-chlorophenol, 4-CP) in a wide pH range (3-9) via nonradical pathway. The generated singlet oxygen (¹O₂) in the PMS/CNF3 (3.46 wt % Fe) system played negligible role in removing 4-CP, and high-valent iron-oxo species fixated in the nitrogen pots of g-C₃N₄ (≡Fe^V═O) was proposed as the dominant reactive species by using dimethyl sulfoxide as a probe compound. The mechanism was hypothesized that PMS was first bound to the Fe(III)-N moieties to generate ≡Fe^V═O, which effectively reacted with 4-CP via electron transfer. GC-MS analysis indicated that 4-chlorocatechol and 1,4-benzoquinone were the major intermediates, which could be further degraded to carboxylates. The kinetic results suggested that the formation of ≡Fe^V═O was proportional to the dosages of PMS and CNF3 under the experimental conditions. Also, the PMS/CNF3 system exhibited satisfactory removal of 4-CP in the presence of inorganic anions and natural organic matters. We believe that this study will provide a new routine for effective PMS activation by heterogeneous iron-complexed catalysts to efficiently degrade organic contaminants via nonradical pathway.

Indefinitely stable iron(IV) cage complexes formed in water by air oxidation

In nature, iron, the fourth most abundant element of the Earth's crust, occurs in its stable forms either as the native metal or in its compounds in the +2 or +3 (low-valent) oxidation states. High-valent iron (+4, +5, +6) compounds are not formed spontaneously at ambient conditions, and the ones obtained synthetically appear to be unstable in polar organic solvents, especially aqueous solutions, and this is what limits their studies and use. Here we describe unprecedented iron(IV) hexahydrazide clathrochelate complexes that are assembled in alkaline aqueous media from iron(III) salts, oxalodihydrazide and formaldehyde in the course of a metal-templated reaction accompanied by air oxidation. The complexes can exist indefinitely at ambient conditions without any sign of decomposition in water, nonaqueous solutions and in the solid state. We anticipate that our findings may open a way to aqueous solution and polynuclear high-valent iron chemistry that remains underexplored and presents an important challenge.

Rapid Destruction of Tetrabromobisphenol A by Iron(III)-Tetraamidomacrocyclic Ligand/Layered Double Hydroxide Composite/H2O2 System

Iron(III)-tetraamidomacrocyclic ligand (Fe(III)-TAML) activators have received widespread attentions for their abilities to activate hydrogen peroxide to oxidize many organic pollutants. In this study, Fe(III)-TAML/layered double hydroxide (LDH) composite was developed by intercalating Fe(III)-TAML into the interlayer of LDH. Electrostatic interaction and hydrogen bonding might account for the adsorption of Fe(III)-TAML on LDH. The newly synthesized Fe(III)-TAML/LDH composite showed superior reactivity as indicated by efficient decomposition of tetrabromobisphenol A (TBBPA) in the presence of hydrogen peroxide, which can be fully degraded within 20 s and the degradation rate increased up to 8 times compared to free Fe(III)-TAML. In addition, the toxicity of the system was significantly reduced after the reaction. The higher reactivity of Fe(III)-TAML/LDH system is attributed to the enhanced adsorption of TBBPA on LDH, which could increase the contact possibility between Fe(III)-TAML and TBBPA. On the basis of the analysis of reaction intermediates, β-scission at the middle carbon atom and C-Br bond cleavage in phenyl ring of TBBPA were involved in the degradation process. Furthermore, our results demonstrated that the Fe(III)-TAML/LDH composite can be reused several times, which could lower the overall cost for environmental implication and render Fe(III)-TAML/LDH as the potential environmentally friendly catalyst for future wastewater treatment under mild reaction conditions.

TAML/H2O2 Oxidative Degradation of Metaldehyde: Pursuing Better Water Treatment for the Most Persistent Pollutants

The extremely persistent molluscicide, metaldehyde, widely used on farms and gardens, is often detected in drinking water sources of various countries at concentrations of regulatory concern. Metaldehyde contamination restricts treatment options. Conventional technologies for remediating dilute organics in drinking water, activated carbon, and ozone, are insufficiently effective against metaldehyde. Some treatment plants have resorted to effective, but more costly UV/H2O2. Here we have examined if TAML/H2O2 can decompose metaldehyde under laboratory conditions to guide development of a better real world option. TAML/H2O2 slowly degrades metaldehyde to acetaldehyde and acetic acid. Nuclear magnetic resonance spectroscopy ((1)H NMR) was used to monitor the degradation-the technique requires a high metaldehyde concentration (60 ppm). Within the pH range of 6.5-9, the reaction rate is greatest at pH 7. Under optimum conditions, one aliquot of TAML 1a (400 nM) catalyzed 5% degradation over 10 h with a turnover number of 40. Five sequential TAML aliquots (2 μM overall) effected a 31% removal over 60 h. TAML/H2O2 degraded metaldehyde steadily over many hours, highlighting an important long-service property. The observation of metaldehyde decomposition under mild conditions provides a further indication that TAML catalysis holds promise for advancing water treatment. These results have turned our attention to more aggressive TAML activators in development, which we expect will advance the observed technical performance.

Oxidative-Extractive Desulfurization of Liquid Fuel by Dimethyl Sulfoxide and ZnCl2 Based Ionic Liquid

In this study, oxidative-extractive desulfurization (OEDS) of liquid fuel has been studied using an ionic liquid prepared by coordination of dimethyl sulfoxide (DMSO) with ZnCl2. Synthetic model liquid fuel was prepared by dissolving dibenzothiophene (DBT) in iso-octane. In addition, actual diesel was also tested for total sulfur removal. Oxidation in the OEDS process was achieved by adding hydrogen peroxide and acetic acid to the mixture. Different parameters such as oil to ionic liquid ratio, oxidant to sulfur ratio and temperature were optimized. Kinetic study was performed at different temperatures so as to calculate the reaction rate constants. Optimized conditions were also tested for their applicability on actual diesel. At the optimized conditions (oxidant to sulfur ratio = 6, oil to ionic liquid ratio = 3 and temperature = 30°C), 78% sulfur removal was observed from model oil (initial sulfur concentration = 1,000 mg/L) and 65% sulfur removal was observed for actual diesel oil (initial sulfur concentration = 140 mg/L).

Oxidation of benzothiophene, dibenzothiophene, and methyl-dibenzothiophene by ferrate(VI)

The reduction of sulfur content in liquid fuel is of a high concern environmentally, and oxydesulfurization approaches have shown high efficiency for removing thiophene-containing compounds from the liquid fuels. The present paper investigates the oxidation of benzothiophene (BT), dibenzothiophene (DBT), and 4-methyl-dibenzothiophene (4-MDBT) by ferrate(VI). The effects of reaction conditions such as the reaction medium pH, solvent type, and adsorbent on the reactivity of ferrate(VI) with the thiophene-containing compounds were investigated. The oxidation of DBT in phosphate-acetonitrile medium was found to be highly sensitive toward the reaction pH, and the highest removal efficiency was observed at the pH 8.0. The complete conversion of BT and DBT to their corresponding sulfones by ferrate(VI) was achieved at room temperature and [ferrate(VI)]/[BT/DBT]∼7.5 while this molar ratio was found to be ∼8.5 for 4-MDBT. The addition of silica gel during the reaction was applied to enhance the oxidation of DBT by ferrate(VI).

Robust iron coordination complexes with N-based neutral ligands as efficient Fenton-like catalysts at neutral pH

The homogeneous Fenton-like oxidation of organic substrates in water with hydrogen peroxide, catalyzed by six different metal coordination complexes with N-based neutral ligands, was studied at ambient conditions and initial pH 7, employing hydrogen peroxide as the terminal oxidant. At low catalyst concentration, the catalytic oxidative depletion of toluene achieved by selected catalysts was much more efficient than that obtained by the Fenton reagent at pH 3. The influence of pH, the water matrix and the catalyst/hydrogen peroxide concentration were investigated for the oxidation of toluene employing [FeCl2(bpmcn)] (1, bpmcn = N,N'-bis(2-pyridylmethyl)-N,N'-dimethyl-trans-1,2-diaminocyclohexane), the most efficient catalyst of the series. Moreover, the evolution of catalysts [FeCl2(bpmcn)] (1) and [Fe(OTf)2(Pytacn)] (3, Pytacn = 1-(2-pyridylmethyl)-4,7-dimethyl-1,4,7-triazacyclononane, OTf = trifluoromethanesulfonate anion) during the course of the reaction was also studied by electrospray ionization mass spectrometry (ESI-MS). The oxidation products derived from toluene oxidation were also analyzed. A plausible mechanism of toluene degradation using [FeCl2(bpmcn)] (1) and [Fe(OTf)2(Pytacn)] (3) as catalysts was proposed, which involves the coexistence of a metal-based path, analogous to that operating in organic media where substrate oxidation is executed by an iron(V)-oxo-hydroxo species, in parallel to a Fenton-type process where hydroxyl radicals are formed.

TAML activator/peroxide-catalyzed facile oxidative degradation of the persistent explosives trinitrotoluene and trinitrobenzene in micellar solutions

TAML activators are well-known for their ability to activate hydrogen peroxide to oxidize persistent pollutants in water. The trinitroaromatic explosives, 2,4,6-trinitrotoluene (TNT) and 1,3,5-trinitrobenzene (TNB), are often encountered together as persistent, toxic pollutants. Here we show that an aggressive TAML activator with peroxides boosts the effectiveness of the known surfactant/base promoted breakdown of TNT and transforms the surfactant induced nondestructive binding of base to TNB into an extensive multistep degradation process. Treatment of basic cationic surfactant solutions of either TNT or TNB with TAML/peroxide (hydrogen peroxide and tert-butylhydroperoxide, TBHP) gave complete pollutant removal for both in <1 h with >75% of the nitrogen and ≥20% of the carbon converted to nitrite/nitrate and formate, respectively. For TNT, the TAML advantage is to advance the process toward mineralization. Basic surfactant solutions of TNB gave the colored solutions typical of known Meisenheimer complexes which did not progress to degradation products over many hours. However with added TAML activator, the color was bleached quickly and the TNB starting compound was degraded extensively toward minerals within an hour. A slower surfactant-free TAML activator/peroxide process also degrades TNT/TNB effectively. Thus, TAML/peroxide amplification effectively advances TNT and TNB water treatment giving reason to explore the environmental applicability of the approach.

Oxidation of inorganic contaminants by ferrates (VI, V, and IV)--kinetics and mechanisms: a review

Inorganic contaminants are found in water, wastewaters, and industrial effluents and their oxidation using iron based oxidants is of great interest because such oxidants possess multi-functional properties and are environmentally benign. This review makes a critical assessment of the kinetics and mechanisms of oxidation reactions by ferrates (Fe(VI)O(4)(2-), Fe(V)O(4)(3-), and Fe(IV)). The rate constants (k, M(-1) s(-1)) for a series of inorganic compounds by ferrates are correlated with thermodynamic oxidation potentials. Correlations agree with the mechanisms of oxidation involving both one-electron and two-electron transfer processes to yield intermediates and products of the reactions. Case studies are presented which demonstrate that inorganic contaminants can be degraded in seconds to minutes by ferrate(VI) with the formation of non-toxic products.

The impact of surfactants on Fe(III)-TAML-catalyzed oxidations by peroxides: accelerations, decelerations, and loss of activity

Iron(III) complexes of tetraamidato macrocyclic ligands (TAMLs), [Fe{4-XC(6)H(3)-1,2-(NCOCMe(2)NCO)(2)CR(2)}(OH(2))](-), 1 (1 a: X = H, R = Me; 1 b: X = COOH, R = Me); 1 c: X = CONH(CH(2))(2)COOH, R = Me; 1 d: CONH(CH(2))(2)NMe(2), R = Me; 1 e: X = CONH(CH(2))(2)NMe(3) (+), R = Me; 1 f: X = H, R = F), have been tested as catalysts for the oxidative decolorization of Orange II and Sudan III dyes by hydrogen peroxide and tert-butyl hydroperoxide in the presence of micelles that are neutral (Triton X-100), positively charged (cetyltrimethylammonium bromide, CTAB), and negatively charged (sodium dodecyl sulfate, SDS). The previously reported mechanism of catalysis involves the formation of an oxidized intermediate from 1 and ROOH (k(I)) followed by dye bleaching (k(II)). The micellar effects on k(I) and k(II) have been separately studied and analyzed by using the Berezin pseudophase model of micellar catalysis. The largest micellar acceleration in terms of k(I) occurs for the 1 a-tBuOOH-CTAB system. At pH 9.0-10.5 the rate constant k(I) increased by approximately five times with increasing CTAB concentration and then gradually decreased. There was no acceleration at higher pH, presumably owing to the deprotonation of the axial water ligand of 1 a in this pH range. The k(I) value was only slightly affected by SDS (in the oxidation of Orange II), but was strongly decelerated by Triton X-100. No oxidation of the water-insoluble, hydrophobic dye Sudan III was observed in the presence of the SDS micelles. The k(II) value was accelerated by cationic CTAB micelles when the hydrophobic primary oxidant tert-butyl hydroperoxide was used. It is hypothesized that tBuOOH may affect the CTAB micelles and increase the binding of the oxidized catalysts. The tBuOOH-CTAB combination accelerated both of the catalysis steps k(I) and k(II).

Catalase-peroxidase activity of iron(III)-TAML activators of hydrogen peroxide

Exceptionally high peroxidase-like and catalase-like activities of iron(III)-TAML activators of H 2O 2 ( 1: Tetra-Amidato-Macrocyclic-Ligand Fe (III) complexes [ F e{1,2-X 2C 6H 2-4,5-( NCOCMe 2 NCO) 2CR 2}(OH 2)] (-)) are reported from pH 6-12.4 and 25-45 degrees C. Oxidation of the cyclometalated 2-phenylpyridine organometallic complex, [Ru (II)( o-C 6H 4py)(phen) 2]PF 6 ( 2) or "ruthenium dye", occurs via the equation [ Ru II ] + 1/2 H 2 O 2 + H +-->(Fe III - TAML) [ Ru III ] + H 2 O, following a simple rate law rate = k obs (per)[ 1][H 2O 2], that is, the rate is independent of the concentration of 2 at all pHs and temperatures studied. The kinetics of the catalase-like activity (H 2 O 2 -->(Fe III - TAML) H 2 O + 1/2 O 2) obeys a similar rate law: rate = k obs (cat)[ 1][H 2O 2]). The rate constants, k obs (per) and k obs (cat), are strongly and similarly pH dependent, with a maximum around pH 10. Both bell-shaped pH profiles are quantitatively accounted for in terms of a common mechanism based on the known speciation of 1 and H 2O 2 in this pH range. Complexes 1 exist as axial diaqua species [FeL(H 2O) 2] (-) ( 1 aqua) which are deprotonated to afford [FeL(OH)(H 2O)] (2-) ( 1 OH) at pH 9-10. The pathways 1 aqua + H 2O 2 ( k 1), 1 OH + H 2O 2 ( k 2), and 1 OH + HO 2 (-) ( k 4) afford one or more oxidized Fe-TAML species that further rapidly oxidize the dye (peroxidase-like activity) or a second H 2O 2 molecule (catalase-like activity). This mechanism is supported by the observations that (i) the catalase-like activity of 1 is controllably retarded by addition of reducing agents into solution and (ii) second order kinetics in H 2O 2 has been observed when the rate of O 2 evolution was monitored in the presence of added reducing agents. The performances of the 1 complexes in catalyzing H 2O 2 oxidations are shown to compare favorably with the peroxidases further establishing Fe (III)-TAML activators as miniaturized enzyme replicas with the potential to greatly expand the technological utility of hydrogen peroxide.