Photocatalytic oxidation of the antibiotic tetracycline on TiO2 and ZnO suspensions

Unlocking solar energy's potential: Dual photocatalytic activities of g-C3N4/Sb2S3 for hydrogen evolution and tetracycline degradation in sunlight

This study focuses on developing a g-C3N4/Sb2S3 heterojunction photocatalyst with different g-C3N4 to Sb2S3 weight ratios (1:1, 1:3, and 3:1) for degrading tetracycline (TC) pollutants. The 1:3 ratio (13 GS) exhibited optimal photocatalytic performance, achieving 99% TC degradation under sunlight within 120 min, compared to 78.4% under visible light and 38% under UV light. The 13 GS catalyst demonstrated strong reusability, maintaining 80% degradation efficiency after six cycles. Scavenger experiments identified hydroxyl radicals as crucial for TC degradation, with DMSO reducing activity by 30%. The photocatalyst also showed high hydrogen production with an apparent quantum efficiency (AQE) of 19.8% under standard conditions, and improved AQE in acidic (23%) and basic (22.7%) conditions, and with CH3OH (23.2%). This g-C3N4/Sb2S3 heterojunction offers a promising solution for degrading toxic contaminants and has the potential for solar-powered applications.

Mapping Photogenerated Electron-Hole Behavior of Graphene Oxide: Insight into a New Mechanism of Photosensitive Pollutant Degradation

The use of graphene oxide (GO) photogenerated electron-hole (e-h+) pairs to degrade pollutants is a novel green method for wastewater treatment. However, the interaction between photosensitive pollutants and a GO-light system remains unclear. In this work, the mechanism of degradation of photosensitive pollutant tetracycline (TC) promoted by GO photogenerated e-h+ pairs was studied. Our studies encompassed the determination of TC removal kinetics, analysis of active substances for TC degradation, identification of degradation products, and computational modeling. Clear evidence shows that a new reaction mechanism of enhanced adsorption and induced generation of reactive oxygen species (ROS) was involved. This mechanism was conducive to significantly enhanced TC removal. Kinetic studies showed a first-order behavior that can be well described by the Langmuir-Hinshelwood model. Radical scavenging experiments confirmed that 1O2, •O2-, and holes (h+) were the main active substances for TC degradation. Electron spin resonance analysis indicated that photoexcited TC molecules may transfer electrons to the conduction band of GO to induce the generation of additional ROS. A major transformation product (m/z 459) during TC degradation was identified with liquid chromatography-mass spectrometry. Density functional theory calculation indicated a stronger adsorption between TC and GO under photoirradiation. This mechanism of photo-enhanced adsorption and synergistic induced generation of ROS provides a new strategy for the removal of emerging pollutants in water. Overall, the new mechanism revealed in this work expands the knowledge of applying GO to wastewater treatment and is of great reference value for research in this field.

Investigating the different transformations of tetracycline using birnessite under different reaction conditions and various humic acids

Prior studies have successfully used manganese oxides to facilitate the transformation of tetracycline in aqueous solution. To further understand the kinetic and the transformation pathway of tetracycline via birnessite (δ-MnO2) under different conditions, experiments were conducted at pH levels of 3, 6, and 9 in the presence or absence of Aldrich humic acid (ADHA). Tetracycline removal followed the pseudo-second-order reaction model in all investigated cases, and the removal efficiency (g mg-1 h -1) followed the following trend: pH 3 (0.45/0.27) > pH 6 (0.036/0.087) > pH 9 (0.036/0.103) in the absence/presence of ADHA. Liquid chromatography-mass spectrometry/mass spectrometry results identified five main transformation products at m/z 495, 477, 493, 459, and 415, produced by the transformation reactions, including hydration, oxidation, desaturation, and oxy reduction. Notably, in the presence of ADHA at pH 3, products with higher toxicity secondary (m/z 477 and 495) were reduced, while less toxicity products (m/z 459 and 415) were enhanced. The experiments utilizing tetracycline and δ-MnO2 with varied humic acids (HA) revealed that HA with high polar organic carbon groups, such as O-alkyl, exhibited higher removal efficiency at pH 6. This research offers the first comprehensive insights into the pathway transformations of tetracycline via δ-MnO2 under different pH conditions and HA types. For further understanding, future work should investigate the binding of HA, TTC, and/or Mn2+ and the oxidation capacity of MnO2 after the reaction to clarify Mn2+ elution mechanisms.

Heterojunction photocatalyst FeS2/g-C3N5 for activating sulfites to degrade tetracycline: A stable degradation system based on heterogeneous processes

The UV/sulfite system is a promising source of •SO4- and/or •OH, but its application is largely limited by the use of UV light due to its high cost and high energy consumption. Graphite carbon nitride (g-C3N5), as a new photocatalytic material, has better visible light absorption capacity and narrower band gap than g-C3N4, which is expected to activate sulfite under visible light to solve this problem. Herein, a novel FeS2/CN heterojunction material based on g-C3N5 was constructed by hydrothermal in-situ synthesis method and successfully activated sulfite, which was confirmed by tetracycline degradation experiments in water. Under optimized conditions, the degradation rate of TC in 1 h reached 96%. The experimental results revealed that the FeS2/CN heterostructure enhances the absorption of visible light and inhibits the recombination of carriers, enabling more electrons and holes to be utilized. Holes play a major role in the degradation reaction, promote the sulfite chain reaction, and effectively regulate the cycle of Fe2+ and Fe3+ in the solution. Iron ion leaching is negligible and the degradation reaction remains stable at pH 5-9.

Magnetically retrievable Fe3O4@SiO2@ZnO piezo-photocatalyst: Synthesis and multiple catalytic properties

The piezo-/photocatalytic effects of ZnO have been in the limelight because of their great potential in environmental remediation and energy conversion. However, the poor recyclability of the suspended catalysts can cause inevitable secondary pollution, which is one of the major issues that limit the practical application of these materials. To address this problem, a magnetically retrievable Fe₃O₄@SiO₂@ZnO nanocomposite was designed and successfully synthesized by multi-step reactions. The ZnO nanorods were vertically grown on the surface of the magnetic Fe₃O₄@SiO₂ microspheres, while SiO₂ served as an insulator to protect the inner core and to inhibit charge transfer across the core/shell interface. The Fe₃O₄@SiO₂@ZnO nanocomposite can be easily collected and separated by using a magnetic field. Along with the good recyclability, the material also exhibited high efficiencies in piezocatalytic, photocatalytic and piezo-photocatalytic dye degradation processes. The rate constant of piezo-photocatalysis reached 95.9 × 10^-3 min^-1, which was 2.2 and 6.1 times that of the individual piezocatalysis and photocatalysis, respectively. The present result confirmed the existence of a synergetic effect between piezo- and photocatalytic processes. Hereby, we demonstrated that incorporation of a magnetic carrier is a feasible strategy to achieve retrievable and highly efficient piezo-/photocatalyst.

Photocatalytic Removal of Thiamethoxam and Flonicamid Pesticides Present in Agro-Industrial Water Effluents

Pesticide residues, when present in agricultural wastewater, constitute a potential risk for the environment and human health. Hence, focused actions for their abatement are of high priority for both the industrial sectors and national authorities. This work evaluates the effectiveness of the photocatalytic process to decompose two frequently detected pesticides in the water effluents of the fruit industry: thiamethoxam-a neonicotinoid compound and flonicamid-a pyridine derivative. Their photocatalytic degradation and mineralization were evaluated in a lab-scale photocatalytic batch reactor under UV-A illumination with the commercial photocatalyst Evonik P25 TiO2 by employing different experimental conditions. The complete degradation of thiamethoxam was achieved after 90 min, when the medium was adjusted to natural or alkaline pH. Flonicamid was proven to be a more recalcitrant substance and the removal efficiency reached ~50% at the same conditions, although the degradation overpassed 75% in the acidic pH medium. Overall, the pesticides’ degradation follows the photocatalytic reduction pathways, where positive charged holes and hydroxyl radicals dominate as reactive species, with complete mineralization taking place after 4 h, regardless of the pH medium. Moreover, it was deduced that the pesticides’ degradation kinetics followed the Langmuir-Hinshelwood (L-H) model, and the apparent rate constant, the initial degradation rate, as well as the L-H model parameters, were determined for both pesticides.

Visible-Light-Driven Photocatalytic Degradation of Tetracycline Using Heterostructured Cu2O-TiO2 Nanotubes, Kinetics, and Toxicity Evaluation of Degraded Products on Cell Lines

This study first reports on the tetracycline photodegradation with the synthesized heterostructured titanium oxide nanotubes coupled with cuprous oxide photocatalyst. The large surface area and more active sites on TiO₂ nanotubes with a reduced band gap (coupling of Cu₂O) provide faster photodegradation of tetracycline under visible light conditions. Cytotoxicity experiments performed on the RAW 264.7 (mouse macrophage) and THP-1 (human monocytes) cell lines of tetracycline and the photodegraded products of tetracycline as well as quenching experiments were also performed. The effects of different parameters like pH, photocatalyst loading concentration, cuprous oxide concentration, and tetracycline load on the photodegradation rate were investigated. With an enhanced surface area of nanotubes and a reduced band gap of 2.58 eV, 1.5 g/L concentration of 10% C-TAC showed the highest efficiency of visible-light-driven photodegradation (∼100% photodegradation rate in 60 min) of tetracycline at pH 5, 7, and 9. The photodegradation efficiency is not depleted up to five consecutive batch cycles. Quenching experiments confirmed that superoxide radicals and hydroxyl radicals are the most involved reactive species in the photodegradation of tetracycline, while valance band electrons are the least involved reactive species. The cytotoxicity percentage of tetracycline and its degraded products on RAW 264.7 (-0.932) as well as THP-1 (-0.931) showed a negative correlation with the degradation percentage with a p-value of 0.01. The toxicity-free effluent of photodegradation suggests the application of the synthesized photocatalyst in wastewater treatment.

Magnetic recyclable heterogeneous catalyst Fe3O4/g-C3N4 for tetracycline hydrochloride degradation via photo-Fenton process under visible light

Antibiotic pollution of water resources is a global problem, and the development of new treatments for destroying antibiotics in water is a priority research. We successfully manufactured recyclable magnetic Fe₃O₄/g-C₃N₄ through the electrostatic self-assembly method. Selecting tetracycline (TC) as the target pollutant, using Fe₃O₄/g-C₃N₄ and H₂O₂ developed a heterogeneous optical Fenton system to remove TC under visible light. Fe₃O₄/g-C₃N₄ was systematically characterized by SEM, TEM, XRD, FTIR, XPS, DRS, and electrochemical methods. The removal efficiency of 7% Fe₃O₄/g-C₃N₄ at pH = 3, H₂O₂ = 5 mM, and catalyst dosage of 1.0 g/L can reach 99.8%. After magnetic separation, the Fe₃O₄/g-C₃N₄ photocatalyst can be recycled five times with minimal efficiency loss. The excellent degradation performance of the prepared catalyst may be attributed to the proper coupling interface between Fe₃O₄ and g-C₃N₄ which promotes the separation and transfer of photogenerated electrons. Photogenerated electrons can also accelerate the conversion of Fe³⁺ to Fe²⁺, thereby producing more ˙OH. The new Fe₃O₄/g-C₃N₄ can be used as a raw material for advanced oxidation of water contaminated by refractory antibiotics.

Synthetic organic antibiotics residues as emerging contaminants waste-to-resources processing for a circular economy in China: Challenges and perspective

Synthetic antibiotics have been known for years to combat bacterial antibiotics. But their overuse and resistance have become a concern recently. The antibiotics reach the environment, including soil from the manufacturing process and undigested excretion by cattle and humans. It leads to overburden and contamination of the environment. These organic antibiotics remain in the environment for a very long period. During this period, antibiotics come in contact with various flora and fauna. The ill manufacturing practices and inadequate wastewater treatment cause a severe problem to the water bodies. After pretreatment from pharmaceutical industries, the effluents are released to the water bodies such as rivers. Even after pretreatment, effluents contain a significant number of antibiotic residues, which affect the living organisms living in the water bodies. Ultimately, river contaminated water reaches the ocean, spreading the contamination to a vast environment. This review paper discusses the impact of synthetic organic contamination on the environment and its hazardous effect on health. In addition, it analyzes and suggests the biotechnological strategies to tackle organic antibiotic residue proliferation. Moreover, the degradation of organic antibiotic residues by biocatalyst and biochar is analyzed. The circular economy approach for waste-to-resource technology for organic antibiotic residue in China is analyzed for a sustainable solution. Overall, the significant challenges related to synthetic antibiotic residues and future aspects are analyzed in this review paper.

S-Scheme BiOCl/MoSe2 Heterostructure with Enhanced Photocatalytic Activity for Dyes and Antibiotics Degradation under Sunlight Irradiation

Semiconductor photocatalysis is considered to be a promising technique to completely eliminate the organic pollutants in wastewater. Recently, S-scheme heterojunction photocatalysts have received much attention due to their high solar efficiency, superior transfer efficiency of charge carriers, and strong redox ability. Herein, we fabricated an S-scheme heterostructure BiOCl/MoSe₂ by loading MoSe₂ nanosheets on the surface of BiOCl microcrystals, using a solvothermal method. The microstructures, light absorption, and photoelectrochemical performances of the samples were characterized by the means of SEM, TEM, XRD, transient photocurrents, electrochemical impedance, and photoluminescence (PL) spectra. The photocatalytic activities of BiOCl, MoSe₂, and the BiOCl/MoSe₂ samples with different MoSe₂ contents were evaluated by the degradation of methyl orange (MO) and antibiotic sulfadiazine (SD) under simulated sunlight irradiation. It was found that BiOCl/MoSe₂ displayed an evidently enhanced photocatalytic activity compared to single BiOCl and MoSe₂, and 30 wt.% was an optimal loading amount for obtaining the highest photocatalytic activity. On the basis of radical trapping experiments and energy level analyses, it was deduced that BiOCl/MoSe₂ follows an S-scheme charge transfer pathway and •O₂⁻, •OH, and h⁺ all take part in the degradation of organic pollutants.

Peroxymonosulfate activation using a composite of copper and nickel oxide coated on SBA-15 for the removal of sulfonamide antibiotics

The sluggish Ni(II)/Ni(III) redox cycle does not benefit perxymonosulfate (PMS) activation for recalcitrant pollutant degradation. To solve this problem, a heterogeneous catalyst, Cu_0.2Ni_0.8O/SBA-15 (CNS), was constructed to activate PMS for decomposing two sulfonamide antibiotics, sulfachlorpyridazine (SACP) and sulfapyridine (SAP). SACP and SAP were completely degraded over Cu_0.2Ni_0.8O/SBA-15/PMS (CNSP) after 90 min. O₂^.- was the dominant active species involved in the degradation of SACP and SAP. Structural analysis and elemental valence state observations indicated that Cu(Ⅰ) provided electrons through Cu-O-Ni bonds to realize the charge compensation for Ni(Ⅲ) in the CNSP system. Thus, the in situ Cu(I)/Cu(II) promoting the Ni(II)/Ni(III) cycle could accelerate the PMS activation. This work provides new insights into the electron transfer between transition metals and the charge compensation mechanism for PMS activation. The degradation mechanism was proposed based on the XPS results before and after the reaction, a radical quenching test, and an EPR test. Combined with the SACP and SAP degradation intermediates identified by LC-MS, we suggest that the choice of treatment process depends on the occurrence of a steric hindrance effect between the molecular structure of the degradation target and free radicals.

Decontamination of emerging pharmaceutical pollutants using carbon-dots as robust materials

Environmental pollution is a critical issue that requires proper measures to maintain environmental health in a sustainable and effective manner. The growing persistence of several active pharmaceutical residues, such as antibiotics like tetracycline, and anti-inflammatory drugs like diclofenac in water matrices is considered an issue of global concern. Numerous sewage/drain waste lines from the domestic and pharmaceutical sector contain an array of toxic compounds, so-called "emerging pollutants" and possess adverse effects on entire living ecosystem and damage its biodiversity. Therefore, effective solution and preventive measures are urgently required to sustainably mitigate and/or remediate pharmaceutically active emerging pollutants from environmental matrices. In this context, herein, the entry pathways of the pharmaceutical waste into the environment are presented, through the entire lifecycle of a pharmaceutical product. There is no detailed review available on carbon-dots (CDs) as robust materials with multifunctional features that support sustainable mitigation of emerging pollutants from water matrices. Thus, CDs-based photocatalysts are emerging as an efficient alternative for decontamination by pharmaceutical pollutants. The addition of CDs on photocatalytic systems has an important role in their performance, mainly because of their up-conversion property, transfer photoinduced electron capacities, and efficient separation of electrons and holes. In this review, we analyze the strategies followed by different researchers to optimize the photodegradation of various pharmaceutical pollutants. In this manner, the effect of different parameters such as pH, the dosage of photocatalyst, amount of carbon dots, and initial pollutant concentration, among others are discussed. Finally, current challenges are presented from a pollution prevention perspective and from CDs-based photocatalytic remediation perspective, with the aim to suggest possible research directions.

Heterogeneous Photocatalysis of Metronidazole in Aquatic Samples

Metronidazole (MET) is a commonly detected contaminant in the environment. The compound is classified as poorly biodegradable and highly soluble in water. Heterogeneous photocatalysis is the most promoted water purification method due to the possibility of using sunlight and small amounts of a catalyst needed for the process. The aim of this study was to select conditions for photocatalytic removal of metronidazole from aquatic samples. The effect of catalyst type, mass, and irradiance intensity on the efficiency of metronidazole removal was determined. For this purpose, TiO₂, ZnO, ZrO₂, WO₃, PbS, and their mixtures in a mass ratio of 1:1 were used. In this study, the transformation products formed were identified, and the mineralization degree of compound was determined. The efficiency of metronidazole removal depending on the type of catalyst was in the range of 50-95%. The highest MET conversion (95%) combined with a high degree of mineralization (70.3%) was obtained by using a mixture of 12.5 g TiO₂-P25 + PbS (1:1; v/v) and running the process for 60 min at an irradiance of 1000 W m^-2. Four MET degradation products were identified by untargeted analysis, formed by the rearrangement of the metronidazole and the C-C bond breaking.

Facile synthesis of magnetic framework composite MgFe2O4@UiO-66(Zr) and its applications in the adsorption-photocatalytic degradation of tetracycline

Recently, metal-organic framework (MOF)-based hybrid composites have attracted significant attention in photocatalytic applications. In this work, MgFe₂O₄@UiO-66(Zr) (MFeO@UiO) composites with varying compositions were successfully synthesized via facile in situ assemblies. Depositing the UiO-66(Zr) framework onto ferrite nanoparticles yielded a composite structure having a lower bandgap energy (2.28-2.60 eV) than that of the parent UiO-66(Zr) (~3.8 eV). Moreover, the MFeO@UiO composite exhibited magnetic separation property and improved porosity. The removal experiment for tetracycline (TC) in aqueous media revealed that the MFeO@UiO composite exhibited a high total TC removal efficiency of ca. ~94% within 45-min preadsorption and 120-min visible-light illumination, which is higher than that of pristine ferrite and UiO-66(Zr). The enhanced photodegradation efficiency of MFeO@UiO is attributed to efficient interfacial charge transfer at the heterojunction and the synergistic effect between the semiconductors. Radical scavenging experiments revealed that photogenerated holes (h⁺) and hydroxyl radicals (·OH) were the major reactive species involved in TC photodegradation. Moreover, the prepared MFeO@UiO nanocomposite showed good recyclability and renewability, making it a potential material for wastewater treatments.

New insight into PFOS transformation pathways and the associated competitive inhibition with other perfluoroalkyl acids via photoelectrochemical processes using GOTiO2 film photoelectrodes

The global distribution and environmental persistence of perfluoroalkyl acids (PFAAs) has been considered a critical environmental concern. In this work, we successfully fabricated a graphene oxide-titanium dioxide (GOTiO₂) photoelectrode for perfluorooctane sulfonate (PFOS) degradation in a photoelectrochemical (PEC) system. The results reveal that a 5 wt.% GOTiO₂ anode possesses the optimal PEC performance, with a band gap (E_g) of 2.42 eV, specific surface area (S_BET) of 72.6 m² g^-1 and specific capacitance (Cs) of 4.63 mF cm^-2. In the PEC system, PFOS can be efficiently removed within 4 h of reaction time, with a pseudo-first-order rate constant of 0.0124 min^-1, under the optimized conditions of current density = 20 mA cm^-2, electrode distance = 5 mm, solution pH = 5.64, [PFOS]₀= 0.5 µM and NaClO₄ electrolyte concentration = 50 mM. The electron transfer pathway, hydroxyl radicals and superoxide radicals are all responsible for PFOS decomposition/transformation. New degradation pathways were identified; a total of 25 PFOS byproducts are reported in this work; and perfluoroalkane sulfonates (PFSAs), perfluorinated aldehydes (PFALs) and hydrofluorocarbons (HFCs) were identified for the first time. PFOS degradation involves the desulfonation pathway as the first step, followed by oxidation and subsequent defluorination, decarboxylation, decarbonylation, sulfonation, defluorination and hydroxylation. The results from this work also show that the reactivity of PFAAs is related to their carbon chain length, with shorter-chain PFAAs exhibiting a lower degradation rate. In a PFAA mixture, a decline in the degradation rate was observed for the shorter-chain-length PFAAs, suggesting stronger competitive inhibition and indicating stronger environmental recalcitrance during the treatment process. Novelty statement: Although many efforts have been made to identify perfluorooctane sulfonate (PFOS) degradation byproducts, previous studies were only able to identify byproducts that are related to perfluorinated carboxylic acids (PFCAs). This is the first study to elucidate the new PFOS degradation pathway; furthermore, this is the first report to identify byproducts containing sulfonate groups (perfluoroalkane sulfonates, PFSAs), aldehyde groups (perfluorinated aldehydes, PFALs), and hydrofluorocarbons (HFCs). This study further systematically explores how perfluoroalkyl acid (PFAA) degradation may be affected in the mixture system: shorter-chain-length PFAAs suffer stronger competitive inhibition in the photoelectrochemical (PEC) system. By utilizing the graphene oxide-titanium dioxide (GOTiO₂) photoelectrode fabricated in this work, PFOS can be successfully decomposed during the PEC process for the first time.

Combined Electro-Fenton and Anodic Oxidation Processes at a Sub-Stoichiometric Titanium Oxide (Ti4O7) Ceramic Electrode for the Degradation of Tetracycline in Water

The mineralization of tetracycline by electrochemical advanced oxidation processes (EAOPs) as well as the study of the toxicity of its intermediates and degradation products are presented. Electro-Fenton (EF), anodic oxidation (AO), and electro-Fenton coupled with anodic oxidation (EF/AO) were used to degrade tetracycline on carbon felt (cathode) and a sub-stoichiometric titanium oxide (Ti4O7) layer deposited on Ti (anode). As compared to EF and AO, the coupled EF/AO system resulted in the highest pollutant removal efficiencies: total organic carbon removal was 69 ± 1% and 68 ± 1%, at 20 ppm and 50 ppm of initial concentration of tetracycline, respectively. The effect of electrolysis current on removal efficiency, mineralization current efficiency, energy consumption, and solution toxicity of tetracycline mineralization were investigated for 20 ppm and 50 ppm tetracycline. The EF/AO process using a Ti4O7 anode and CF cathode provides low energy and high removal efficiency of tetracycline caused by the production of hydroxyl radicals both at the surface of the non-active Ti4O7 electrode and in solution by the electro-Fenton process at the cathodic carbon felt. Complete removal of tetracycline was observed from HPLC data after 30 min at optimized conditions of 120 mA and 210 mA for 20 ppm and 50 ppm tetracycline concentrations. Degradation products were elucidated, and the toxicity of the products were measured with luminescence using Microtox® bacteria toxicity test.

Synthesis of Selected Mixed Oxide Materials with Tailored Photocatalytic Activity in the Degradation of Tetracycline

The elimination of antibiotics occurring in the natural environment has become a great challenge in recent years. Among other techniques, the photocatalytic degradation of this type of pollutant seems to be a promising approach. Thus, the search for new photoactive materials is currently of great importance. The present study concerns the sol–gel synthesis of mono, binary and ternary TiO₂-based materials, which are used as active photocatalysts. The main goal was to evaluate how the addition of selected components—zirconium dioxide (ZrO₂) and/or zinc oxide (ZnO)—during the synthesis of TiO₂-based materials and the temperature of thermal treatment affect the materials’ physicochemical and photocatalytic properties. The fabricated mixed oxide materials underwent detailed physicochemical analysis, utilizing scanning-electron microscopy (SEM), X-ray diffraction (XRD), diffuse reflectance spectroscopy (DRS), energy-dispersive X-ray spectroscopy (EDS), low-temperature N₂ sorption (BET model), X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR). The synthesized mixed oxide materials were used as photocatalysts in the heterogeneous photodegradation of tetracycline (TC). The physicochemical properties of the fabricated photocatalysts, including morphology, crystalline and textural structure, as well as the pH of the reaction system in the photocatalytic tests, were taken into account in determining their photo-oxidation activity. LC–MS/MS analysis was used to identify the possible degradation products of the selected antibiotic.

In Situ Growth of Metallic 1T-MoS2 on TiO2 Nanotubes with Improved Photocatalytic Performance

1T-MoS₂ is in situ grown on TiO₂ nanotubes (TNTs) using a hydrothermal method, forming a 1T-MoS₂@TNTs composite, which is confirmed by its physical characterization. The prepared composites show enhanced photocatalytic performance for the degradation of tetracycline hydrochloride under visible light, and the improved photocatalytic activity is closely related to the loaded amount of 1T-MoS₂. Therein, 0.5 wt % 1T-MoS₂@TNTs can degrade 57% in 1 h, which is the highest photocatalytic efficiency observed in experiments so far. It is speculated that the introduction of 1T-MoS₂ may optimize light absorption and charge separation/transport. The active species are identified and the reaction mechanism is proposed here.

F-doped ZnO nano- and meso-crystals with enhanced photocatalytic activity in diclofenac degradation

Diclofenac (DCF), a non-steroidal anti-inflammatory drug, is considered one of the most widespread emerging contaminants. Its incidence in water can favor the growth of drug-resistant bacteria and harm aquatic organisms endangering both the human health and the ecosystem. Advanced oxidation processes (AOPs) based on the action of reactive oxygen species are very effective technologies for the removal of this contaminant from water. In this context, ZnO is one of the most studied semiconductors for photocatalytic water treatment. In this work, the photocatalytic activity of fluorine-doped ZnO nano- and meso-crystals synthesized by a hydrothermal approach is reported, exploring the role of a low F atomic concentration (0.25, 0.5 and 1 at. %) on the degradation of DCF in comparison with bare ZnO. All doped samples show high rates of DCF degradation and mineralization, which were realized primarily thanks to their high efficiency in the generation of hydroxyl radicals (OH). The property-structure-function relationships of the materials are investigated by complementary techniques, such as SEM, XRD, EPR, UV-vis DRS and PL, with the aim to evaluate the role of fluorine in determining their morphological, electronic and optical properties.

Antibiotic tetracycline enhanced the toxic potential of photo catalytically active P25 titanium dioxide nanoparticles towards freshwater algae Scenedesmus obliquus

Titanium dioxide nanoparticles (TiO₂ NPs) often co-exist with the other co-contaminants like antibiotics. The antibiotics can potentially modify the toxic effects of the co-contaminants like the NPs in the environment. Hence, the present study aims to understand the toxic potential of a binary mixture of tetracycline (TC) and TiO₂ NPs to a model freshwater alga - Scenedesmus obliquus. Since, TiO₂ NPs are known to be photo-catalytically active, non-irradiated (NI-TiO₂ NPs), UVA pre-irradiated (UVA-TiO₂ NPs), and UVB pre-irradiated (UVB-TiO₂ NPs) TiO₂ NPs was mixed separately with TC and their toxicity evaluated. It was observed that the cell viability for the three experimental groups decreased significantly (p < 0.001) with respect to the individual NPs-treated algae. Abbott's model suggested that the interaction between TC and Ni-TiO₂ NPs was additive for all the concentrations of NI-TiO₂ NPs tested. However, in the case of both the UV pre-irradiated NPs, the interaction was additive for the lower concentration (1.56 μM) and synergistic for both the higher concentrations (3.13, and 6.26 μM). At the concentrations tested the cell membrane damage and intracellular uptake of NPs increased significantly (p < 0.05) for the mixture in comparison with the individual NPs treated algae. This study suggested that even a non-lethal concentration of TC (EC₁₀ = 0.135 μM) increased the toxic potential of the TiO₂ NPs significantly and when this antibiotic was used in combination with the UV pre-irradiated NPs, toxicity even increased to a higher level.

Optimization of photocatalytic degradation of rhodamine B using Box-Behnken experimental design: Mineralization and mechanism

The aim of this work was to optimize the photocatalytic degradation of rhodamine B (RhB) using a four-factor Box-Behnken experimental design, and the study was carried out under artificial irradiation (24-W UV lamp) using ZnO in suspension. The Box-Behnken model has been validated with an error less than 5%. A total (100%) RhB removal and COD abatement rates were reached under optimal conditions of treatment time, ZnO dose, and stirring speed at different concentrations of dye. The study of the effect of irradiation type (solar and UV lamp) on the degradation of RhB showed that solar irradiation gave a better rate of degradation with complete discoloration after 2 hr. The study of RhB degradation mechanism indicates that O 2 ∙ - were the main active species for the degradation of this pollutant. The comparison between the degradation of RhB alone and RhB prepared with varnish (as it is usually used in industry) revealed that degradation of RhB alone is faster comparing than that of RhB/varnish mixture. The results showed that the biodegradability was improved after a contact time of 60 min with a BOD₅ /COD ratio increasing from 0.23 to 0.90. PRACTITIONER POINTS: Optimization of the photocatalytic degradation of rhodamine B using a four-factor Box-Behnken experimental design. Investigation of dye mineralization. The degradation mechanism of rhodamine. Biodegradability assessment based on the BOD₅ /COD ratio.

Insights into mesoporous MCM-41-supported titania decorated with CuO nanoparticles for enhanced photodegradation of tetracycline antibiotic

In this research, tetracycline photodegradation under UV light was investigated over bare TiO₂ and a series of MCM-41 supported CuO-TiO₂ heterojunctions varying in CuO content with the intent of exploring the effect of MCM-41 presence and especially, CuO addition. Several techniques including XRD, FESEM, EDX, DRS, BET, and PL were applied to characterize the physicochemical and photophysical properties of synthesized nanocomposites. It was found that the co-existence of MCM-41 and CuO enhances the surface dispersion of Ti species, leading to less number of agglomerates and smaller particle size of TiO₂, which it promoted photophysical properties and reinforced the interaction of surface species with the support and thereby, the photosite leachings were lessened. However, the excessive loadings alleviate the synergetic effect of CuO due to the significant decrease of surface area, the appearance of more number of agglomerations, and surface coverage of MCM-41. The results revealed that CuO addition not only enhances the photocatalytic activity of TiO₂/MCM-41 but also makes it reusable in further experiments. It was also observed that the highest photodegradation of tetracycline was obtained over TiO₂-CuO/MCM-41 nanocomposite containing 5 wt% CuO. It is attributed to less electron-hole recombination, appropriate band gap, smaller number of agglomerations, and more uniform dispersion of photosites. Following the obtained results, a possible reaction mechanism was also proposed.

ZnO@ZIF-8 core–shell heterostructures with improved photocatalytic activity

ZnO@ZIF-8 heterostructures with ZnO as the core and ZIF-8 as the shell were successfully fabricated and completely degraded methylene blue in ∼4.5 min under solar light irradiation.

Effective removal of paracetamol in compound parabolic collectors and fixed bed reactors under natural sunlight

Removal of persistent organic pollutants from water is quite challenging using biological treatment processes in waste water treatment plants. In order to improve the wastewater treatment quality for water reuse, many techniques are developed and the most commonly used is heterogeneous photocatalysis. This work studies the degradation of paracetamol (PAR), which is one of the most persistent pharmaceutical drugs in water, and widely used as an analgesic and antipyretic drug in Algeria. The paracetamol degradation has been carried out via heterogeneous photocatalysis, in a suspended solution of catalyst using a Compound Parabolic Collectors (CPC) reactor and in a fixed bed with immobilized catalyst under natural solar radiation. The degradation performance has been studied under various parameters such as substrate concentration and pH of solution. The degradation efficiency decreased when the initial paracetamol concentration increased from 2.5 mg/L to 20 mg/L. In addition, the selected reactors were found to be competent for the paracetamol degradation with an almost 98-99% removal of PAR. For the CPC reactor with suspended TiO₂, the paracetamol elimination reached 98% after 300 min; however, for the fixed-bed reactor, TiO₂ immobilized on cellulose-based paper was utilized, which yielded an almost 99% reduction in the PAR concentration after 90 min only of solar irradiation.

Graphitic carbon nitride/SmFeO3 composite Z-scheme photocatalyst with high visible light activity

In this work, novel heterostructured photocatalysts associating graphitic carbon nitride (g-CN) and SmFeO₃ were prepared via a mixing-ultrasonication process. Structural, optical and morphological characterizations demonstrate that the interfacial junction between g-CN and SmFeO₃ is well established for all g-CN/SmFeO₃ composites prepared with g-CN:SmFeO₃ weight ratio of 20:80, 50:50 and 80:20. The g-CN/SmFeO₃ (80:20) composite exhibits the highest photocatalytic activity for the degradation of pollutants like the Orange II dye and the tetracycline hydrochloride antibiotic under visible light irradiation. This high photocatalytic activity originates from the enhanced light absorption over the whole visible region compared to pure g-CN and from the improved separation and transfer of photogenerated electron/hole pairs as demonstrated by photoluminescence and photocurrent measurements. A Z-scheme charge carrier transfer mechanism was demonstrated for the photocatalytic reactions. The g-CN/SmFeO₃ (80:20) catalyst was also demonstrated to be stable and can be reused up to six times without significant alteration of the activity.

Tetracycline Photocatalytic Degradation under CdS Treatment

Industrialization and the growing consumption of medicines leads to global aquatic contamination. One of the antibiotics widely used against bacterial infections in both human and veterinary medicine is tetracycline. Despite its positive antibiotic action, tetracycline is resistant against degradation, and therefore it accumulates in the environment, including the aquatic environment, creating great health hazards, possibly stimulating antibiotic resistance of pathogenic organisms. In this research, aqueous suspensions of semiconductor nanoparticles CdS were used for photocatalytic activity studies in the presence of methylene blue as a model compound, and finally, in the presence of tetracycline, a broad-spectrum antibiotic widely used against bacterial infections, as well as a live-stock food additive. The mechanism and kinetic rate constants of photocatalytic degradation processes of methylene blue and tetracycline were described in correlation with the energy diagram of CdS nanoparticles.

Photodegradation of Antibiotics by Noncovalent Porphyrin-Functionalized TiO2 in Water for the Bacterial Antibiotic Resistance Risk Management

Antibiotics represent essential drugs to contrast the insurgence of bacterial infections in humans and animals. Their extensive use in livestock farming, including aquaculture, has improved production performances and food safety. However, their overuse can implicate a risk of water pollution and related antimicrobial resistance. Consequently, innovative strategies for successfully removing antibiotic contaminants have to be advanced to protect human health. Among them, photodegradation TiO₂-driven under solar irradiation appears not only as a promising method, but also a sustainable pathway. Hence, we evaluated several composite TiO₂ powders with H₂TCPP, CuTCPP, ZnTCPP, and SnT4 porphyrin for this scope in order to explore the effect of porphyrins sensitization on titanium dioxide. The synthesis was realized through a fully non-covalent functionalization in water at room conditions. The efficacy of obtained composite materials was also tested in photodegrading oxolinic acid and oxytetracycline in aqueous solution at micromolar concentrations. Under simulated solar irradiation, TiO₂ functionalized with CuTCPP has shown encouraging results in the removal of oxytetracycline from water, by opening the way as new approaches to struggle against antibiotic's pollution and, finally, to represent a new valuable tool of public health.