A coupled low temperature oxidative and ionic liquid pretreatment of lignocellulosic biomass

Comparison of alkali and ionic liquid pretreatment methods on the biochemical methane potential of date palm waste biomass

Date palm waste biomass is a readily accessible agricultural waste biomass that may be used to produce biogas. Because the complex structure of date palm waste biomass prevents the embedded holo-cellulosic sugars from biodegrading, pretreatment is required to increase methane (CH₄) yield. The present investigation aimed to comparatively determine the impact of alkali and ionic liquid pretreatment on the biochemical methane potential (BMP) of different types of date palm waste biomass. The findings revealed that ionic liquid pretreated Palm and Fruit bunch showed the highest BMP (321.67 mL CH₄/g-TS) and substrate conversion efficiency (68.01%), respectively, over other biomass samples. In alkali pretreatment, the highest BMP and substrate conversion efficiency were detected with Palm (309.76 mL CH₄/g-TS) and Spathe (62.09%). The high BMP and substrate conversion efficiency of date palm waste biomass may be harnessed for bioenergy production when this ionic liquid pretreatment technology is used.

Chemo-enzymatic approaches for consolidated bioconversion of Saccharum spontaneum biomass to ethanol-biofuel

A novel strategy involving sodium dodecylsulfate (SDS) (SDS assisted tris (2-hydroxyethyl) methyl- ammonium methyl sulphate ([TMA][MeSO₄], ionic liquid) pretreatment of Saccharum spontaneum biomass (SSB) following its enzymatic saccharification, and conversion into ethanol-biofuel in a consolidated bioprocess (CBP) was developed. Ionic liquid stable enzyme preparation developed from Bacillus subtilis G₂ was used for saccharification. Optimized pretreatment and saccharification variables enhanced the sugar yield (2.35-fold), which was fermented to ethanol content of 104.42 mg/g biomass with an efficiency of 35.73%. The pretreated biomass was examined for textural/ultrastructural alterations by scanning electron microscopy (SEM), ¹H/¹³C nuclear magnetic resonance (NMR), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), surface area measurements, water retention value, and cellulase adsorption isotherms. The combined [TMA][MeSO₄] and SDS pretreatment disrupted the lignocellulosic microfibrils, and increased the porosity and surface area. The study provides new mechanistic insights on combined IL and surfactant pretreatment of biomass for its efficient conversion to biofuel.

Transforming lignocellulosic biomass into biofuels enabled by ionic liquid pretreatment

Processes that can convert lignocellulosic biomass into biofuels and chemicals are particularly attractive considering renewability and minimal environmental impact. Ionic liquids (ILs) have been used as novel solvents in the process development in that they can effectively deconstruct recalcitrant lignocellulosic biomass for high sugar yield and lignin recovery. From cellulose-dissolving ILs to choline-based and protic acidic ILs, extensive research in this field has been done, driven by the promising future of IL pretreatment. Meanwhile, shortcomings and technological hurdles are ascertained during research and developments. It is necessary to present a general overview of recent developments and challenges in this field. In this review paper, three aspects of advances in IL pretreatment are critically analyzed: biocompatible ILs, protic acidic ILs and combinatory pretreatments.

Treatment and characterization of biomass of soybean and rice hulls using ionic liquids for the liberation of fermentable sugars

We investigated the changes in the physical structure of cellulose recovered from soybean and rice hulls treated with the ionic liquids 1-butyl-3-methylimidazolium chloride ([bmim][Cl]) and 1-butyl-3-methylimidazolium acetate ([bmim][Ac]). The characterization was carried out by a combination of thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscopy (SEM). Regenerated cellulose from soybean hull showed loss of crystallinity and high structural disruption caused by both ionic liquid treatments as compared to the untreated material. In contrast, rice hull presented only a small structural disruption when treated with [bmim][Ac] and was practically unaffected by [bmim][Cl], showing that this biomass residue is recalcitrance towards physico-chemical treatments, possibly as a consequence of its high composition content in silica. These results suggest the use of soybean hull as a substrate to be treated with ionic liquids in the preparation of lignocellulosic hydrolysates to be used in second-generation ethanol production, whereas other methods should be considered to treat rice hull biomass.

Pretreatment of eucalyptus with recycled ionic liquids for low-cost biorefinery

It is urgent to develop recycled ionic liquids (ILs) as green solvents for sustainable biomass pretreatment. The goal of this study is to explore the availability and performance of reusing 1-allyl-3-methylimidazolium chloride ([amim]Cl) and 1-butyl-3-methylimidazolium acetate ([bmim]OAc) for pretreatment, structural evolution, and enzymatic hydrolysis of eucalyptus. Cellulose enzymatic digestibility slightly decreased with the increased number of pretreatment recycles. The hydrolysis efficiencies of eucalyptus pretreated via 4th recycled ILs were 54.3% for [amim]Cl and 72.8% for [bmim]OAc, which were 5.0 and 6.7-folds higher than that of untreated eucalyptus. Deteriorations of ILs were observed by the relatively lower sugar conversion and lignin removal from eucalyptus after 4th reuse. No appreciable changes in fundamental framework and thermal stability of [amim]Cl were observed even after successive pretreatments, whereas the anionic structure of [bmim]OAc was destroyed or replaced. This study suggested that the biomass pretreatment with recycled ILs was a potential alternative for low-cost biorefinery.