Coordination chemistry insights into the role of alkali metal promoters in dinitrogen reduction

Coordination of Al(C6F5)3 vs. B(C6F5)3 on group 6 end-on dinitrogen complexes: chemical and structural divergences

The coordination of the Lewis superacid tris(pentafluorophenyl)alane (AlCF) to phosphine-supported, group 6 bis(dinitrogen) complexes [ML2(N2)2] is explored, with M = Cr, Mo or W and L = dppe (1,2-bis(diphenylphosphino)ethane), depe (1,2-bis(diethylphosphino)ethane), dmpe (1,2-bis(dimethylphosphino)ethane) or 2 × PMe2Ph. Akin to tris(pentafluorophenyl)borane (BCF), AlCF can form 1 : 1 adducts by coordination to one distal nitrogen of general formula trans-[ML2(N2){(μ-η1:η1-N2)Al(C6F5)3}]. The boron and aluminium adducts are structurally similar, showing a comparable level of N2 push-pull activation. A notable exception is a bent (BCF adducts) vs. linear (AlCF adducts) M-N-N-LA motif (LA = Lewis acid), explained computationally as the result of steric repulsion. A striking difference arose when the formation of two-fold adducts was conducted. While in the case of BCF the 2 : 1 Lewis pairs could be observed in equilibrium with the 1 : 1 adduct and free borane but resisted isolation, AlCF forms robust 2 : 1 adducts trans-[ML2{(μ-η1:η1-N2)Al(C6F5)3}2] that isomerise into a more stable cis configuration. These compounds could be isolated and structurally characterized, and represent the first examples of trinuclear heterometallic complexes formed by Lewis acid-base interaction exhibiting p and d elements. Calculations also demonstrate that from the bare complex to the two-fold aluminium adduct, substantial decrease of the HOMO-LUMO gap is observed, and, unlike the trans adducts (1 : 1 and 1 : 2) for which the HOMO was computed to be a pure d orbital, the one of the cis-trinuclear compounds mixes a d orbital with a π* one of each N2 ligands. This may translate into a more favourable electrophilic attack on the N2 ligands instead of the metal centre, while a stabilized N2-centered LUMO should ease electron transfer, suggesting Lewis acids could be co-activators for electro-catalysed N2 reduction. Experimental UV-vis spectra for the tungsten family of compounds were compared with TD-DFT calculations (CAM-B3LYP/def2-TZVP), allowing to assign the low extinction bands found in the visible spectrum to unusual low-lying MLCT involving N2-centered orbitals. As significant red-shifts are observed upon LA coordination, this could have important implications for the development of visible light-driven nitrogen fixation.

Harnessing halogen bond donors for enhanced nitrogen reduction: a case study on metal-free boron nitride single-atom catalysts

Developing efficient catalysts for ammonia synthesis is increasingly crucial but remains a formidable challenge due to the lack of robust design criteria, particularly in addressing the activity and selectivity issues, especially in electrochemical nitrogen reduction reactions (NRR). In this study, we systematically investigated the catalytic potential of hexagonal boron nitride (BN) embedded with non-metal (C, Si, P and S) atoms as an electrocatalyst for the nitrogen reduction reaction using density functional theory (DFT) computations. The preference for non-metal-doped BN nanomaterials stems from their ability to suppress hydrogen evolution and their environmentally friendly nature, in contrast to transition metals. Among the designed single-atom catalysts (SACs), Si-doped boron nitride (SiBBN) exhibits a favorable inclination toward activating nitrogen, which is determined by the combination of advantageous molecular orbital coupling and formation of a covalent bond with the N2 molecule. Under thermal conditions, the first protonation step emerges as the rate-determining step (22.66 kcal mol-1) for SiBBN. Conversely, under electrochemical conditions, the final elementary step becomes the potential-determining step (PDS) with 2.38 eV. We explored the impact of the exogenous addition of Lewis acids (alkali metal ions, neutral boron Lewis acids, and halogen bond donors) on modulating the electrochemical NRR activity. Our results highlight the pivotal role of halogen bond donors as catalytic promoters in facilitating electron density transfer through activated N2, establishing a push-pull charge transfer mechanism that populates the distal nitrogen more than the proximal nitrogen. This facilitates the potential requirements for the first reduction step. The synergistic effect of both halogen bonding and hydrogen bonding interactions in the final reduction step was proven to be the main determinant for a significant reduction in the PDS from 2.38 to 0.10 V. Notably, this study unveils the pioneering role of halogen bond donors as promoters for NRR, providing valuable insights into the development of robust metal-free catalysts and promoters in experimental research.

Redox Processes Involving Oxygen: The Surprising Influence of Redox-Inactive Lewis Acids

Metalloenzymes with heteromultimetallic active sites perform chemical reactions that control several biogeochemical cycles. Transformations catalyzed by such enzymes include dioxygen generation and reduction, dinitrogen reduction, and carbon dioxide reduction-instrumental transformations for progress in the context of artificial photosynthesis and sustainable fertilizer production. While the roles of the respective metals are of interest in all these enzymatic transformations, they share a common factor in the transfer of one or multiple redox equivalents. In light of this feature, it is surprising to find that incorporation of redox-inactive metals into the active site of such an enzyme is critical to its function. To illustrate, the presence of a redox-inactive Ca2+ center is crucial in the Oxygen Evolving Complex, and yet particularly intriguing given that the transformation catalyzed by this cluster is a redox process involving four electrons. Therefore, the effects of redox inactive metals on redox processes-electron transfer, oxygen- and hydrogen-atom transfer, and O-O bond cleavage and formation reactions-mediated by transition metals have been studied extensively. Significant effects of redox inactive metals have been observed on these redox transformations; linear free energy correlations between Lewis acidity and the redox properties of synthetic model complexes are observed for several reactions. In this Perspective, these effects and their relevance to multielectron processes will be discussed.

Dinitrogen cleavage by a dinuclear uranium(iii) complex

Understanding the role of multimetallic cooperativity and of alkali ion-binding in the second coordination sphere is important for the design of complexes that can promote dinitrogen (N2) cleavage and functionalization. Herein, we compare the reaction products and mechanism of N2 reduction of the previously reported K2-bound dinuclear uranium(iii) complex, [K2{[UIII(OSi(OtBu)3)3]2(μ-O)}], B, with those of the analogous dinuclear uranium(iii) complexes, [K(2.2.2-cryptand)][K{UIII(OSi(OtBu)3)3}2(μ-O)], 1, and [K(2.2.2-cryptand)]2[{UIII(OSi(OtBu)3)3}2(μ-O)], 2, where one or two K+ ions have been removed from the second coordination sphere by addition of 2.2.2-cryptand. In this study, we found that the complete removal of the K+ ions from the inner coordination sphere leads to an enhanced reducing ability, as confirmed by cyclic voltammetry studies, of the resulting complex 2, and yields two new species upon N2 addition, namely the U(iii)/U(iv) complex, [K(2.2.2-cryptand)][{UIII(OSi(OtBu)3)3}(μ-O){UIV(OSi(OtBu)3)3}], 3, and the N2 cleavage product, the bis-nitride, terminal-oxo complex, [K(2.2.2-cryptand)]2[{UV(OSi(OtBu)3)3}(μ-N)2{UVI(OSi(OtBu)3)2(κ-O)}], 4. We propose that the formation of these two products involves a tetranuclear uranium-N2 intermediate that can only form in the absence of coordinated alkali ions, resulting in a six-electron transfer and cleavage of N2, demonstrating the possibility of a three-electron transfer from U(iii) to N2. These results give an insight into the relationship between alkali ion binding modes, multimetallic cooperativity and reactivity, and demonstrate how these parameters can be tuned to cleave and functionalize N2.

BN Analogue of Butadiyne: A Platform for Dinitrogen Release and Reduction

Exploration of the metallomimetic chemistry of main group elements is of the utmost importance from the perspective of both fundamental research and potential applications. Here, we report the synthesis, bonding analysis, and reactivities of an isolable diiminoborane, Mes*B≡N─N≡BMes* (Mes* = 2,4,6-tri-tert-butylphenyl) (1), a BN analogue of butadiyne. This species is characterized by a conjugated B≡N─N≡B moiety, a structural feature that enables the controlled release of N2 when it is exposed to organic nitriles. Furthermore, the N2 unit in 1 could be reduced to an ammonium salt via cleavage of the BN triple bond. Our work shows a rare example of an unsaturated BN system, serving as a platform for both the release and reduction of N2. This discovery opens new pathways and holds substantial influence on the future design of functional main group N2 species.

Understanding catalytic synergy in dinuclear polymerization catalysts for sustainable polymers

Understanding the chemistry underpinning intermetallic synergy and the discovery of generally applicable structure-performances relationships are major challenges in catalysis. Additionally, high-performance catalysts using earth-abundant, non-toxic and inexpensive elements must be prioritised. Here, a series of heterodinuclear catalysts of the form Co(III)M(I/II), where M(I/II) = Na(I), K(I), Ca(II), Sr(II), Ba(II) are evaluated for three different polymerizations, by assessment of rate constants, turn over frequencies, polymer selectivity and control. This allows for comparisons of performances both within and between catalysts containing Group I and II metals for CO2/propene oxide ring-opening copolymerization (ROCOP), propene oxide/phthalic anhydride ROCOP and lactide ring-opening polymerization (ROP). The data reveal new structure-performance correlations that apply across all the different polymerizations: catalysts featuring s-block metals of lower Lewis acidity show higher rates and selectivity. The epoxide/heterocumulene ROCOPs both show exponential activity increases (vs. Lewis acidity, measured by the pKa of [M(OH2)m]n+), whilst the lactide ROP activity and CO2/epoxide selectivity show linear increases. Such clear structure-activity/selectivity correlations are very unusual, yet are fully rationalised by the polymerization mechanisms and the chemistry of the catalytic intermediates. The general applicability across three different polymerizations is significant for future exploitation of catalytic synergy and provides a framework to improve other catalysts.

Electrochemical Nitrogen Fixation for Green Ammonia: Recent Progress and Challenges

Ammonia, a key feedstock used in various industries, has been considered a sustainable fuel and energy storage option. However, NH3 production via the conventional Haber-Bosch process is costly, energy-intensive, and significantly contributing to a massive carbon footprint. An electrochemical synthetic pathway for nitrogen fixation has recently gained considerable attention as NH3 can be produced through a green process without generating harmful pollutants. This review discusses the recent progress and challenges associated with the two relevant electrochemical pathways: direct and indirect nitrogen reduction reactions. The detailed mechanisms of these reactions and highlight the recent efforts to improve the catalytic performances are discussed. Finally, various promising research strategies and remaining tasks are presented to highlight future opportunities in the electrochemical nitrogen reduction reaction.

Syntheses, Characterizations, Crystal Structures, and Protonation Reactions of Dinitrogen Chromium Complexes Supported with Triamidoamine Ligands

A novel dinitrogen-dichromium complex, [{Cr(L^Bn)}₂(μ-N₂)] (1), has been prepared from reaction of CrCl₃ with a lithiated triamidoamine ligand (Li₃L^Bn) under dinitrogen. The X-ray crystal structure analysis of 1 revealed that it is composed of two independent dimeric Cr complexes bridged by N₂ in the unit cell. The bridged N-N bond lengths (1.188(4) and 1.185(7) Å) were longer than the free dinitrogen molecule. The elongations of N-N bonds in 1 were also supported by the fact that the ν(N-N) stretching vibration at 1772 cm^-1 observed in toluene is smaller than the free N₂. Complex 1 was identified to be a 5-coordinated high spin Cr(IV) complex by Cr K-edge XANES measurement. The ¹H NMR spectrum and temperature dependent magnetic susceptibility of 1 indicated that complex 1 is in the S = 1 ground state, in which two Cr(IV) ions and unpaired electron spins of the bridging N₂^2- ligand are strongly antiferromagnetically coupled. Reaction of complex 1 with 2.3 equiv of Na or K gave chromium complexes with N₂ between the Cr ion and the respective alkali metal ion, [{CrNa(L^Bn)(N₂)(Et₂O)}₂] (2) and [{CrK(L^Bn)(N₂)}₄(Et₂O)₂] (3), respectively. Furthermore, the complexes 2 and 3 reacted with 15-crown-5 and 18-crown-6 to form the respective crown-ether adducts, [CrNa(L^Bn)(N₂)(15-crown-5)] (4) and [CrK(L^Bn)(N₂)(18-crown-6)] (5). The XANES measurements of complexes 2, 3, 4, and 5 revealed that they are high spin Cr(IV) complexes like complex 1. All complexes reacted with a reducing agent and a proton source to form NH₃ and/or N₂H₄. The yields of these products in the presence of K⁺ were higher than those in the presence of Na⁺. The electronic structures and binding properties of 1, 2, 3, 4, and 5 were evaluated and discussed based on their DFT calculations.

Mechanism of Nitrogen-Carbon Bond Formation from Iron(IV) Disilylhydrazido Intermediates during N2 Reduction

We recently reported a reaction sequence that activates C-H bonds in simple arenes as well as the N-N triple bond in N₂, delivering the aryl group to N₂ to form a new N-C bond (Nature 2020, 584, 221). This enables the transformation of abundant feedstocks (arenes and N₂) into N-containing organic compounds. The key N-C bond forming step occurs upon partial silylation of N₂. However, the pathway through which reduction, silylation, and migration occurred was unknown. Here, we describe synthetic, structural, magnetic, spectroscopic, kinetic, and computational studies that elucidate the steps of this transformation. N₂ must be silylated twice at the distal N atom before aryl migration can occur, and sequential silyl radical and silyl cation addition is a kinetically competent pathway to a formally iron(IV)-NN(SiMe₃)₂ intermediate that can be isolated at low temperature. Kinetic studies show its first-order conversion to the migrated product, and DFT calculations indicate a concerted transition state for migration. The electronic structure of the formally iron(IV) intermediate is examined using DFT and CASSCF calculations, which reveal contributions from iron(II) and iron(III) resonance forms with oxidized NNSi₂ ligands. The depletion of electron density from the Fe-coordinated N atom makes it electrophilic enough to accept the incoming aryl group. This new pathway for the N-C bond formation offers a method for functionalizing N₂ using organometallic chemistry.

Halide Effects in Reductive Splitting of Dinitrogen with Rhenium Pincer Complexes

Transition metal halide complexes are used as precursors for reductive N₂ activation up to full splitting into nitride complexes. Distinct halide effects on the redox properties and yields are frequently observed yet not well understood. Here, an electrochemical and computational examination of reductive N₂ splitting with the rhenium(III) complexes [ReX₂(PNP)] (PNP = N(CH₂CH₂PtBu₂)₂ and X = Cl, Br, I) is presented. As previously reported for the chloride precursor ( J. Am. Chem. Soc. 2018, 140, 7922), the heavier halides give rhenium(V) nitrides upon (electro-)chemical reduction in good yields yet with significantly anodically shifted electrolysis potentials along the halide series. Dinuclear, end-on N₂-bridged complexes, [{ReX(PNP)}₂(μ-N₂)], were identified as key intermediates in all cases. However, while the chloride complex is exclusively formed via 2-electron reduction and Re^III/Re^I comproportionation, the iodide system also reacts via an alternative Re^II/Re^II-dimerization mechanism at less negative potentials. This alternative pathway relies on the absence of the potential inversion after reduction and N₂ activation that was observed for the chloride precursor. Computational analysis of the relevant Re^III/II and Re^II/I redox couples by energy decomposition analysis attributes the halide-induced trends of the potentials to the dominating electrostatic Re-X bonding interactions over contributions from charge transfer.

Recent Advances in Application of Graphitic Carbon Nitride-Based Catalysts for Photocatalytic Nitrogen Fixation

Ammonia, the second most-produced chemical, is widely used in agricultural and industrial applications. However, traditional industrial ammonia production dominated by the Haber-Bosch process presents huge resource and environment issues due to the massive energy consumption and CO₂ emission. The newly emerged nitrogen fixation technology, photocatalytic N₂ reduction reaction (p-NRR), uses clean solar energy with zero-emission, holding great prospect to achieve sustainable ammonia synthesis. Although great efforts are made, the p-NRR catalysts still suffer from poor N₂ adsorption and activation, inferior light absorption, and fast recombination of photocarriers. Due to the tunable electronic structure of the metal-free polymeric graphitic carbon nitride (g-C₃ N₄ ), the above-mentioned issues can be significantly alleviated, making it the most promising p-NRR photocatalyst. This review summarizes the recent development of g-C₃ N₄ -based catalysts for p-NRR, including the working principle of p-NRR catalysts, the challenges of developing p-NRR catalysts, and corresponding solutions. Particularly, the roles of defect engineering and heterojunction construction on g-C₃ N₄ to the enhancement of photocatalytic performances are emphasized. In addition, computational studies are introduced to deepen the understanding of reaction pathways. At last, perspectives are provided on the development of p-NRR catalysts.

Metal-Ligand Cooperativity in Iron Dinitrogen Complexes: Proton-Coupled Electron Transfer Disproportionation and an Anionic Fe(0)N2 Hydride

Metal-ligand cooperativity and redox-active ligands enable the use of open-shell first-row transition metals in catalysis. However, the fleeting nature of the reactive intermediates prevents direct inspection of the relevant catalytic species. By employing phosphine α-iminopyridine (PNN)-based complexes, we show that chemical and redox metal-ligand cooperativity can be combined in the coordination sphere of iron dinitrogen complexes. These systems show dual activation modes either through deprotonation, which triggers reversible core dearomatization, or through reversibly accepting one electron by reducing the imine functionality. (PNN)Fe(N₂) fragments can be obtained under mildly reducing conditions. Deprotonation of such complexes induces dearomatization of the pyridine core while retaining a terminally coordinated N₂ ligand. This species is nevertheless stable in solution only below -30 °C and undergoes unusual ligand-assisted redox disproportionation through proton-coupled electron transfer at room temperature. The origin of this phenomenon is the significant lability of the α-imine C-H bonds in the dearomatized species, where the calculated bond dissociation free energy is 48.7 kcal mol^-1. The dispropotionation reaction yields an overreduced iron compound, demonstrating that the formation of such species can be triggered by mild bases, and does not require harsh reducing agents. Reaction of the dearomatized species with dihydrogen yields a rare anionic Fe hydride that binds dinitrogen and features a rearomatized core.

Cation assisted binding and cleavage of dinitrogen by uranium complexes

N2 binding affinity decreases markedly in a series of isostructural U(iii)–alkali ions complexes with increasing cation size. N2 binding is undetectable in the Cs analogue, but the first example of cesium-assisted N2 cleavage to bis-nitride was observed at ambient condition.

Dinitrogen-derived (diarylboryl)diazenido complexes with differing coordination to the thallium cation

To prepare N₂-derived cationic boryldiazenido-tungsten complexes as models of semimetallic metal-borinium frustrated Lewis pairs activating N₂, we have attempted halide abstraction from trans-(diarylboryl)diazenido-halo-tungsten complexes. Reactions with Tl⁺ led to adducts in which coordination of the cation differs depending on the boryldiazenide substituents and the ancillary ligand. Chloride scavenging was not observed.

Ni(0)-promoted activation of Csp2 -H and Csp2 -O bonds

A dinickel(0)-N2 complex, stabilized with a rigid acridane-based PNP pincer ligand, was studied for its ability to activate C(sp2)-H and C(sp2)-O bonds. Stabilized by a Ni-μ-N2-Na+ interaction, it activates C-H bonds of unfunctionalized arenes, affording nickel-aryl and nickel-hydride products. Concomitantly, two sodium cations get reduced to Na(0), which was identified and quantified by several methods. Our experimental results, including product analysis and kinetic measurements, strongly suggest that this C(sp2)-H activation does not follow the typical oxidative addition mechanism occurring at a low-valent single metal centre. Instead, via a bimolecular pathway, two powerfully reducing nickel ions cooperatively activate an arene C-H bond and concomitantly reduce two Lewis acidic alkali metals under ambient conditions. As a novel synthetic protocol, nickel(ii)-aryl species were directly synthesized from nickel(ii) precursors in benzene or toluene with excess Na under ambient conditions. Furthermore, when the dinickel(0)-N2 complex is accessed via reduction of the nickel(ii)-phenyl species, the resulting phenyl anion deprotonates a C-H bond of glyme or 15-crown-5 leading to C-O bond cleavage, which produces vinyl ether. The dinickel(0)-N2 species then cleaves the C(sp2)-O bond of vinyl ether to produce a nickel(ii)-vinyl complex. These results may provide a new strategy for the activation of C-H and C-O bonds mediated by a low valent nickel ion supported by a structurally rigidified ligand scaffold.

Nitrogen Fixing Azotobacter Species as Potential Soil Biological Enhancers for Crop Nutrition and Yield Stability

Biological nitrogen fixation (BNF) refers to a microbial mediated process based upon an enzymatic "Nitrogenase" conversion of atmospheric nitrogen (N₂) into ammonium readily absorbable by roots. N₂-fixing microorganisms collectively termed as "diazotrophs" are able to fix biologically N₂ in association with plant roots. Specifically, the symbiotic rhizobacteria induce structural and physiological modifications of bacterial cells and plant roots into specialized structures called nodules. Other N₂-fixing bacteria are free-living fixers that are highly diverse and globally widespread in cropland. They represent key natural source of nitrogen (N) in natural and agricultural ecosystems lacking symbiotic N fixation (SNF). In this review, the importance of Azotobacter species was highlighted as both important free-living N₂-fixing bacteria and potential bacterial biofertilizer with proven efficacy for plant nutrition and biological soil fertility. In addition, we described Azotobacter beneficial plant promoting traits (e.g., nutrient use efficiency, protection against phytopathogens, phytohormone biosynthesis, etc.). We shed light also on the agronomic features of Azotobacter that are likely an effective component of integrated plant nutrition strategy, which contributes positively to sustainable agricultural production. We pointed out Azotobacter based-biofertilizers, which possess unique characteristics such as cyst formation conferring resistance to environmental stresses. Such beneficial traits can be explored profoundly for the utmost aim to research and develop specific formulations based on inoculant Azotobacter cysts. Furthermore, Azotobacter species still need to be wisely exploited in order to address specific agricultural challenges (e.g., nutrient deficiencies, biotic and abiotic constraints) taking into consideration several variables including their biological functions, synergies and multi-trophic interactions, and biogeography and abundance distribution.

Dinitrogen Fixation: Rationalizing Strategies Utilizing Molecular Complexes

Dinitrogen (N2 ) is the most abundant gas in Earth's atmosphere, but its inertness hinders its use as a nitrogen source in the biosphere and in industry. Efficient catalysts are hence required to ov. ercome the high kinetic barriers associated to N2 transformation. In that respect, molecular complexes have demonstrated strong potential to mediate N2 functionalization reactions under mild conditions while providing a straightforward understanding of the reaction mechanisms. This Review emphasizes the strategies for N2 reduction and functionalization using molecular transition metal and actinide complexes according to their proposed reaction mechanisms, distinguishing complexes inducing cleavage of the N≡N bond before (dissociative mechanism) or concomitantly with functionalization (associative mechanism). We present here the main examples of stoichiometric and catalytic N2 functionalization reactions following these strategies.

Boron: the first p-block element to fix inert N2 all the way to NH3

Boron, the fifth lightest element, in its sub-valent state in the form of borylene is able to activate inert dinitrogen all the way to the ammonium ion. The entire conversion has been established through a successive reduction-cum-protonation sequence, through the isolation of all intermediate species involving addition of two electrons and two protons. The activation of dinitrogen by the ambiphilic borylene is a parallel tactic to that of the well-known Haber-Bosch process. This chemistry can be potentially extrapolated to the activation of similar small molecules by low valent compounds of boron and other p-block elements.

Silylamido supported dinitrogen heterobimetallic complexes: syntheses and their catalytic ability

Molybdenum dinitrogen complexes supported by monodentate arylsilylamido ligand, [Ar(Me₃Si)N]₃MoN₂Mg(THF)₂[N(SiMe₃)Ar] (5) and [Ar(Me₃Si)N]₃MoN₂SiMe₃ (6) (Ar = 3,5-Me₂C₆H₃) were synthesized and structurally characterized, and proved to be effective catalysts for the disproportionation of cyclohexadienes and isomerization of terminal alkenes. The ¹H NMR spectrum suggested that the bridging nitrogen ligand remains intact during the catalytic reaction, indicating possible catalytic ability of the Mo-N=N motif.

Recent Advances in Supported Metal Catalysts and Oxide Catalysts for the Reverse Water-Gas Shift Reaction

The reverse water-gas shift reaction (RWGSR), a crucial stage in the conversion of abundant CO2 into chemicals or hydrocarbon fuels, has attracted extensive attention as a renewable system to synthesize fuels by non-traditional routes. There have been persistent efforts to synthesize catalysts for industrial applications, with attention given to the catalytic activity, CO selectivity, and thermal stability. In this review, we describe the thermodynamics, kinetics, and atomic-level mechanisms of the RWGSR in relation to efficient RWGSR catalysts consisting of supported catalysts and oxide catalysts. In addition, we rationally classify, summarize, and analyze the effects of physicochemical properties, such as the morphologies, compositions, promoting abilities, and presence of strong metal-support interactions (SMSI), on the catalytic performance and CO selectivity in the RWGSR over supported catalysts. Regarding oxide catalysts (i.e., pure oxides, spinel, solid solution, and perovskite-type oxides), we emphasize the relationships among their surface structure, oxygen storage capacity (OSC), and catalytic performance in the RWGSR. Furthermore, the abilities of perovskite-type oxides to enhance the RWGSR with chemical looping cycles (RWGSR-CL) are systematically illustrated. These systematic introductions shed light on development of catalysts with high performance in RWGSR.

Amorphous/Crystalline Hetero-Phase TiO2 -Coated α-Fe2 O3 Core-Shell Nanospindles: A High-Performance Artificial Nitrogen Fixation Electrocatalyst

Electrochemical nitrogen fixation techniques have emerged as a promisingly sustainable approach to face the challenge associated with nitrogen activation of ammonia synthesis by the Haber-Bosch process under ambient conditions. Herein, the performance of electrocatalytic nitrogen reduction for the production of α-Fe₂ O₃ nanospindles coated with mesoporous TiO₂ with different crystallinity [denoted as α-Fe₂ O₃ @mTiO₂ -X (X=300, 400, and 500 °C)] were investigated. The as-prepared α-Fe₂ O₃ @mTiO₂ -400 composite exhibits a large NH₃ yield (27.2 μg h^-1  mg_cat. ^-1 ) at -0. 5 V vs. the reversible hydrogen electrode and a high Faradaic efficiency (13.3 %) in 0.1 m Na₂ SO₄ , with excellent electrochemical durability. This work presents a novel avenue for the rational design of efficient unique hetero-phase nanocatalysts toward sustainable electrocatalytic N₂ fixation.

Counterion Dependence of Dinitrogen Activation and Functionalization by a Diniobium Hydride Anion

We report the synthesis of anionic diniobium hydride complexes with a series of alkali metal cations (Li⁺ , Na⁺ , and K⁺ ) and the counterion dependence of their reactivity with N₂ . Exposure of these complexes to N₂ initially produces the corresponding side-on end-on N₂ complexes, the fate of which depends on the nature of countercations. The lithium derivative undergoes stepwise migratory insertion of the hydride ligands onto the aryloxide units, yielding the end-on bridging N₂ complex. For the potassium derivative, the N-N bond cleavage takes place along with H₂ elimination to form the nitride complex. Treatment of the side-on end-on N₂ complex with Me₃ SiCl results in silylation of the terminal N atom and subsequent N-N bond cleavage along with H₂ elimination, giving the nitride-imide-bridged diniobium complex.

The Influence of Nucleophilic and Redox Pincer Character as well as Alkali Metals on the Capture of Oxygen Substrates: The Case of Chromium(II)

Dimeric [CrL]₂ , where L is the conjugate base of bis-pyrazolyl pyridine, is evaluated for its ability to undergo inner sphere and outer sphere redox chemistry. It reacts with Cp₂ Fe⁺ to give [Cr₄ (HL)₄ (μ₄ -O)]²⁺ , still containing divalent Cr. Reduction (KC₈ ) of [CrL]₂ by two electrons gives [K₂ (THF)₃ Cr₃ L₃ (μ₃ -O)], and by four electrons gives [K₄ (THF)₁₀ Cr₂ L₂ (μ-O)], each of which has scavenged (hydr)oxide from glass surface because of the electrophilicity of the underligated Cr. [K₄ (THF)₁₀ Cr₂ L₂ (μ-O)], is shown by comprehensive DFT calculations and analysis of intra-ligand bond lengths to contain a pyridyl radical L^3- and Cr^II , illustrating that this pincer is proton-responsive, redox active, and a versatile donor to associated K⁺ ions here. The K⁺ electrophiles interact with electron-rich oxo, but do not significantly (>5 kcal mol^-1 ) alter spin state energies. Inner sphere oxidation of [CrL]₂ with a quinone gives [Cr₂ L₂ (semiquinone)₂ ], while pre-reduced [CrL]₂ ^2- reacts with quinone to give [K₃ (THF)₃ Cr₂ L₂ (catecholate)₂ (μ-OH)], a product of capture of two undercoordinated LCr(catecholate)^1- by hydroxide.

Cation effects on dynamics of ligand-benzylated formazanate boron and aluminium complexes

The dynamic processes present in ligand-benzylated formazanate boron and aluminium complexes are investigated using variable temperature NMR experiments and lineshape analyses. The observed difference in activation parameters for complexes containing either organic countercations (NBu4+) or alkali cations is rationalized on the basis of a different degree of ion-pairing in the ground state, and the data are in all cases consistent with a mechanism that involves pyramidal inversion at the nitrogens in the heterocyclic ring rather than homolytic N-C(benzyl) bond cleavage.

Activation of Dinitrogen by Polynuclear Metal Complexes

Activation of dinitrogen plays an important role in daily anthropogenic life, and the processes by which this fixation occurs have been a longstanding and significant research focus within the community. One of the major fields of dinitrogen activation research is the use of multimetallic compounds to reduce and/or activate N2 into a more useful nitrogen-atom source, such as ammonia. Here we report a comprehensive review of multimetallic-dinitrogen complexes and their utility toward N2 activation, beginning with the d-block metals from Group 4 to Group 11, then extending to Group 13 (which is exclusively populated by B complexes), and finally the rare-earth and actinide species. The review considers all polynuclear metal aggregates containing two or more metal centers in which dinitrogen is coordinated or activated (i.e., partial or complete cleavage of the N2 triple bond in the observed product). Our survey includes complexes in which mononuclear N2 complexes are used as building blocks to generate homo- or heteromultimetallic dinitrogen species, which allow one to evaluate the potential of heterometallic species for dinitrogen activation. We highlight some of the common trends throughout the periodic table, such as the differences between coordination modes as it relates to N2 activation and potential functionalization and the effect of polarizing the bridging N2 ligand by employing different metal ions of differing Lewis acidities. By providing this comprehensive treatment of polynuclear metal dinitrogen species, this Review aims to outline the past and provide potential future directions for continued research in this area.

The Role of Organoferrates in Iron-Catalyzed Cross-Couplings

Recent groundbreaking studies on organoferrates have demonstrated that coordinatively unsaturated three-coordinate-σ-alkylferrates are active catalysts in Fe-catalyzed cross-couplings with Grignard reagents and that pronounced solvent and counterion effects dictate metalate speciation and catalyst activity. Thanks to modern spectroscopic methods, sensitive catalyst intermediates could be analyzed.

Surface-defect-engineered photocatalyst for nitrogen fixation into value-added chemical feedstocks

Surface-defect-engineered photocatalyst for nitrogen fixation.

2D MXene-derived Nb2O5/C/Nb2C/g-C3N4 heterojunctions for efficient nitrogen photofixation

Novel 2D MXene-derived Nb₂O₅/C/Nb₂C/g-C₃N₄ showed a high nitrogen reduction rate in water (0.365 mmol h⁻¹ g_cat⁻¹); the nitrogen reduction efficiency could be further promoted 2.5 times (0.927 mmol h⁻¹ g_cat⁻¹) with the optimized pH of 9.

Controlling dinitrogen functionalization at rhenium through alkali metal ion pairing

The rhenium(i) salt Na[Re(η⁵-Cp)(BDI)] can be cooled in solution under a dinitrogen atmosphere to selectively access complexes containing rhenium(iii) centers bound to direduced, doubly-bonded N₂ (i.e. diazenide) fragments. We demonstrate this reactivity is critically dependent on ion pairing involving the Na⁺ ion in the starting material, as N₂ binding by Na[Re(η⁵-Cp)(BDI)] proved to be much less favorable when the Na⁺ was sequestered by benzo-12-crown-4. The analogous chemistry of Na[Re(η⁵-Cp)(BDI)] with carbon monoxide (CO) and 2,6-xylylisocyanide (XylNC) was also investigated, which provided structural and spectroscopic bases for determining the impact of ion pairing on π-acid activation in this system.

Efficient Non-dissociative Activation of Dinitrogen to Ammonia over Lithium-Promoted Ruthenium Nanoparticles at Low Pressure

There is an exciting possibility to decentralize ammonia synthesis for fertilizer production or energy storage without carbon emission from H₂ obtained from renewables at small units operated at lower pressure. However, no suitable catalyst has yet been developed. Ru catalysts are known to be promoted by heavier alkali dopants. Instead of using heavy alkali metals, Li is herein shown to give the highest rate through surface polarisation despite its poorest electron donating ability. This exceptional promotion rate makes Ru-Li catalysts suitable for ammonia synthesis, which outclasses industrial Fe counterparts by at least 195 fold. Akin to enzyme catalysis, it is for the first time shown that Ru-Li catalysts hydrogenate end-on adsorbed N₂ stabilized by Li⁺ on Ru terrace sites to ammonia in a stepwise manner, in contrast to typical N₂ dissociation on stepped sites adopted by Ru-Cs counterparts, giving new insights in activating N₂ by metallic catalysts.

Electrostatic polarization of nonpolar substrates: a study of interactions between simple cations and Mo-bound N2

Although a great deal of catalytic studies have focused on covalent interactions between substrates and catalyst centers, recognition of the importance of noncovalent and ionic interactions is driving new approaches to catalyst design. Electrostatic interactions with simple cations (those with little covalency, such as alkali metals) play crucial roles in many catalytic processes, but these effects are challenging to study due to their complicated solvation and speciation behaviour. These effects are particularly difficult to study during cation-mediated reactions with weakly-polar or non-polar substrates. Dinitrogen is one of the most nonpolar substrates known to be affected by electrostatic interactions in both heterogeneous and homogeneous reactions but understanding the significance of these effects requires further exploration. To examine these effects systematically, a new multidentate ligand framework bearing pendent crown ethers has been developed and incorporated into a series of Mo(0)-based dinitrogen complexes. Prepared via both reduction and ligand substitution routes, the strength and impact of cation-N₂ interactions have been studied experimentally (IR spectroscopy) and computationally. Although the smallest cation (Li⁺) has the largest impact on the ground-state heterobimetallic activation of N₂, solvation interactions are highly competitive and result in low Li⁺-(N₂)Mo binding affinities. Thus, although smaller cations can have the largest electronic impact on substrates, these interactions are also the least persistent.

Promoting photocatalytic nitrogen fixation with alkali metal cations and plasmonic nanocrystals

Photocatalytic nitrogen fixation can produce ammonia from nitrogen and water under ambient conditions in the presence of sunlight. Here, we report that alkali metal cations (Li⁺, Na⁺, and K⁺) can significantly promote nitrogen activation and plasmonic nanocrystals (Au and Ag) can sensitize photocatalysts under visible light. The ammonia yield and selectivity on Au/P25 under UV-vis irradiation could be increased from 0.085 mmol g^-1 h^-1 and 75% to 0.43 mmol g^-1 h^-1 and 94.5% when promoted by K⁺, showing a visible-light-driven activity of 0.14 mmol g^-1 h^-1 and an AQE of 0.62% at 550 nm. The activity could be further increased to 1.02 (UV-vis) and 0.32 (visible) mmol g^-1 h^-1 with AQE of 0.93% at 550 nm with methanol added as the sacrificial agent. This strategy could be applied to a series of photocatalysts (e.g. TiO₂, ZnO, and BiOBr) and may represent a general approach for designing efficient nitrogen fixation processes.

Steric Switching From Photochemical to Thermal N2 Splitting: A Computational Analysis of the Isomerization Reaction {(Cp*)(Am)Mo}2(μ-η1:η1-N2) → {(Cp*)(Am)Mo}2(μ-N)2

A μ-η1:η1-N2-bridged Mo dimer, {(η5-C5Me5)[N(Et)C(Ph)N(Et)]Mo}2(μ-N2), cleaves dinitrogen thermally resulting in a crystallographically characterized bis-μ-N-bridged dimer, {(η5-C5Me5)[N(Et)C(Ph)N(Et)]Mo}2(μ-N)2. A structurally related Mo dimer with a bulkier amidinate ligand, ([N(iPr)C(Me)N(iPr)]), is only capable of photochemical dinitrogen activation. These opposing reactivities were rationalized as steric switching between the thermally and photochemically active species. A computational analysis of the geometric and electronic structures of intermediates along the isomerization pathway from Mo2(μ-η1:η1-N2) to Mo2(μ-η2:η1-N2) and Mo2(μ-η2:η2-N2), and finally Mo2(μ-N)2, is presented here. The extent to which dispersion affects the thermodynamics of the isomers is evaluated, and it is found that dispersion interactions play a significant role in stabilizing the product and making the reaction exergonic. The concept of steric switching is further explored with theoretical models with sterically even less demanding ligands, indicating that systematic ligand modifications could be used to rationally design the N2 activation energy landscape. An analysis of electronic excitations in the computed UV-vis spectra of the two complexes shows that a particular type of asymmetric excitations is only present in the photoactive complex.