Group 13 metal (Al, Ga, In) alkyls supported by N -heterocyclic carbenes for use in lactide ring-opening polymerization catalysis

Flexible NHC-aryloxido aluminum complex and its zwitterionic imidazolium aluminate precursor in ring-opening polymerization of ε-caprolactone

Anionic donor-functionalized NHC (N-heterocyclic carbene) complexes of Al are rare. We report one such case here, an NHC-aryloxido AlMe2 complex [Al(L)Me2] (2), following a stepwise synthesis from the proligand [HO-4,6-tBu2-C6H2-2-CH2{CH(NCHCHNAr)}]Br [LH2Br; Ar = 2,6-iPr2-C6H3 (Dipp)] and AlMe3via the zwitterionic intermediate [Al(LH)Me2Br] (1). The ligand's flexibility in 2 is evident from the conformational fluxionality revealed by VT-1H NMR spectroscopic analysis. The ∠O-Al-C (ca. 100.5°) bite angle is also wider than the ∠O-Ti-C (ca. 80.6°) as seen in our recently reported Ti complex [Ti(L)(NMe2)2Br]. DFT analysis showed that the CNHC-Al bond is significantly ionic, as is the CNHC-Ti bond. Both 1 and 2 are active in the ring-opening polymerization (ROP) of ε-caprolactone (CL). 2, similar to [Ti(L)(NMe2)2Br], exhibits bifunctional MLC-type monomer activation, but only at an elevated temperature. However, the 2/BnOH combination is catalytically active at room temperature, likely through a zwitterionic [Al(LH)Me2(OBn)]. The 1/BnOH combination follows a similar mechanism but surprisingly at a faster rate.

Ethylene polymerization using N-Heterocyclic carbene complexes of silver and aluminum

Various transition metal catalysts have been utilized for ethylene polymerization. Silver catalysts have attracted less attention as the catalysts, but are potential for production of high molecular weight polyethylene. Herein, we report that silver complexes with various N-heterocyclic carbene (NHC) ligands in combination with modified methylaluminoxane (MMAO) afford polyethylene with high molecular weight (melting point over 140°C). SEM observation showed that the produced polyethylene has ultra-high molecular weight. NMR investigation of the reaction between the silver complexes with organoaluminums indicate that the NHC ligands transfer from the silver complex to aluminum to produce NHC aluminum complexes. Ph3C[B(C6F5)4] abstract methyl group from the NHC aluminum complex to afford cationic aluminum complex. The NHC aluminum complex promoted ethylene polymerization in the presence of Ph3C[B(C6F5)4] and organoaluminums. NHC ligand also promoted ethylene polymerization in combination with MMAO to produce polyethylene with high melting point (140.7°C). Thus, the aluminum complexes are considered to be the actual active species in silver-catalyzed ethylene polymerization.

Isoselective Polymerization of rac-Lactide by Aluminum Complexes of N-Heterocyclic Carbene-Phosphinidene Adducts

The N-heterocyclic carbene-phosphinidene adducts (NHC)PH were reacted with AlMe3 in toluene to afford the monoaluminum complexes [{(IDipp)PH}AlMe3 ] and [{(IMes)PH}AlMe3 ] (IDipp=1,3-bis(2,6-diisopropylphenyl)imidazolin-2-ylidene, IMes=1,3-bis(2,4,6-trimethylphenyl)imidazolin-2-ylidene). In contrast, the dialuminum complex [{(Me IMes)PH}(AlMe3 )2 ] was obtained for Me IMes=1,3-bis(2,4,6-trimethylphenyl)-4,5-dimethylimidazolin-2-ylidene. These complexes served as initiators for the efficient ring-opening polymerization of rac-lactide in toluene at 60 °C. High degrees of isoselectivity were found for the poly(rac-lactide) obtained in the presence of the monoaluminum complexes (Pm up to 0.92, Tm up to 191 °C), whereas almost atactic polymers were produced by the dialuminum complex. Detailed mechanistic studies reveal that the polymerization proceeds via a coordination-insertion mechanism with the carbene-phosphinidene ligands acting as stereodirecting groups.

Donor-Stabilized Monocarba-Bridged Bis(cyclopentadienyl)alanes

Five monocarba-bridged bis(cyclopentadienyl)aluminum halide NHC and thione complexes and one monocarba-bridged bis(cyclopentadienyl)phosphanylalane NHC complex are reported. The former were synthesized by transmetalation of a C[1]magnesocenophane with the corresponding aluminum(III) chloride and aluminum(III) bromide donor adducts. The phosphanylalane complex was obtained by a subsequent functionalization of the corresponding bromoalane with lithium diphenylphosphide. All complexes were characterized in solution by multinuclear NMR spectroscopy and in the solid state by single crystal X-ray diffraction. Bonding energies of the NHC and thione ligands to the aluminum centres were estimated by DFT calculations.

The Ring-Opening Polymerization-Polycondensation (ROPPOC) Approach to Cyclic Polymers

A new concept called ring-opening polymerization-polycondensation (ROPPOC) is presented and discussed. This synthetic strategy is based on the intermediate formation of chains having two end groups that can react with each other. The ROPPOC syntheses are subdivided into three groups according to the nature of the chain ends: two ionic end groups, one ionic and one covalent chain end, and a combination of two reactive covalent end groups may be involved, depending on the catalyst. The usefulness for the preparation of cyclic polymers is discussed with a review of numerous previously published examples. These examples concern the following classes of cyclic polymers: polypeptides, polyamides, and polyesters, including polycarbonates and cyclic polysiloxanes. It is demonstrated that the results of certain ROPPOC syntheses are in contradiction to the Jacobson-Stockmayer theory. Finally, the usefulness of ROPPOCs for the detection of polydisperse catenanes is discussed.

N-Heterocyclic Carbene Adducts of Main Group Elements and Their Use as Ligands in Transition Metal Chemistry

N-Heterocyclic carbenes (NHC) are nowadays ubiquitous and indispensable in many research fields, and it is not possible to imagine modern transition metal and main group element chemistry without the plethora of available NHCs with tailor-made electronic and steric properties. While their suitability to act as strong ligands toward transition metals has led to numerous applications of NHC complexes in homogeneous catalysis, their strong σ-donating and adaptable π-accepting abilities have also contributed to an impressive vitalization of main group chemistry with the isolation and characterization of NHC adducts of almost any element. Formally, NHC coordination to Lewis acids affords a transfer of nucleophilicity from the carbene carbon atom to the attached exocyclic moiety, and low-valent and low-coordinate adducts of the p-block elements with available lone pairs and/or polarized carbon-element π-bonds are able to act themselves as Lewis basic donor ligands toward transition metals. Accordingly, the availability of a large number of novel NHC adducts has not only produced new varieties of already existing ligand classes but has also allowed establishment of numerous complexes with unusual and often unprecedented element-metal bonds. This review aims at summarizing this development comprehensively and covers the usage of N-heterocyclic carbene adducts of the p-block elements as ligands in transition metal chemistry.

Recent progress in the application of group 1, 2 & 13 metal complexes as catalysts for the ring opening polymerization of cyclic esters

This review focuses on recent developments concerned with the use of well-defined main group complexes as (pre-)catalysts for the ROP of cyclic esters to give aliphatic polyesters; factors influencing catalytic activity, selectivity and polymer properties are all discussed.

Polymerization of Polar Monomers Mediated by Main-Group Lewis Acid-Base Pairs

The development of new or more sustainable, active, efficient, controlled, and selective polymerization reactions or processes continues to be crucial for the synthesis of important polymers or materials with specific structures or functions. In this context, the newly emerged polymerization technique enabled by main-group Lewis pairs (LPs), termed as Lewis pair polymerization (LPP), exploits the synergy and cooperativity between the Lewis acid (LA) and Lewis base (LB) sites of LPs, which can be employed as frustrated Lewis pairs (FLPs), interacting LPs (ILPs), or classical Lewis adducts (CLAs), to effect cooperative monomer activation as well as chain initiation, propagation, termination, and transfer events. Through balancing the Lewis acidity, Lewis basicity, and steric effects of LPs, LPP has shown several unique advantages or intriguing opportunities compared to other polymerization techniques and demonstrated its broad polar monomer scope, high activity, control or livingness, and complete chemo- or regioselectivity, as well as its unique application in materials chemistry. These advances made in LPP are comprehensively reviewed, with the scope of monomers focusing on heteroatom-containing polar monomers, while the polymerizations mediated by main-group LAs and LBs separately that are most relevant to the LPP are also highlighted or updated. Examples of applying the principles of the LPP and LP chemistry as a new platform for advancing materials chemistry are highlighted, and currently unmet challenges in the field of the LPP, and thus the suggested corresponding future research directions, are also presented.

NHCs in Main Group Chemistry

Since the discovery of the first stable N-heterocyclic carbene (NHC) in the beginning of the 1990s, these divalent carbon species have become a common and available class of compounds, which have found numerous applications in academic and industrial research. Their important role as two-electron donor ligands, especially in transition metal chemistry and catalysis, is difficult to overestimate. In the past decade, there has been tremendous research attention given to the chemistry of low-coordinate main group element compounds. Significant progress has been achieved in stabilization and isolation of such species as Lewis acid/base adducts with highly tunable NHC ligands. This has allowed investigation of numerous novel types of compounds with unique electronic structures and opened new opportunities in the rational design of novel organic catalysts and materials. This Review gives a general overview of this research, basic synthetic approaches, key features of NHC-main group element adducts, and might be useful for the broad research community.

Sterically Bulky NHC Adducts of GaMe3 and InMe3 for H2 Activation and Lactide Polymerization

The sterically bulky Ga(III) and In(III) (IPr*)MMe3 adducts (1 and 2) and (SItBu)MMe3 adducts (3 and 4) (M = Ga, In; IPr* = 1,3-bis{2,6-bis(diphenylmethyl)-4-methylphenyl}-1,3-dihydro- imidazol-2-ylidene; SItBu = 1,3-bis(1,1-dimethylethyl)-imidazolidin-2-ylidene) were prepared and structurally characterized, allowing an estimation of the steric hindrance of such Lewis pairs (yields in 1–4: 92%, 90%, 73%, and 42%, respectively). While the IPr* adducts 1 and 2 are robust species, the more severely congested SItBu adducts 3 and 4 are more reactive and exhibit a limited stability in solution. Adduct (SItBu)GaMe3 (3) reacts quickly with H2 at room temperature to afford the corresponding aminal product, 1,3-di-tert-butylimidazolidine (5), along with free GaMe3. Such Frustrated Lewis Pair (FLP) reactivity constitutes the first instance of a H2 activation involving a simple trialkyl GaR3 species. Adduct 3 also mediates the ring-opening polymerization (ROP) of rac-lactide at room temperature to afford cyclic polylactide (PLA).

Lewis Pair Catalysts in the Polymerization of Lactide and Related Cyclic Esters

Polyesters, especially poly(lactide) (PLA), are used widely as biodegradable and biocompatible materials, yet their controllable synthesis, especially the stereoselective synthesis of polyesters, is still a challenge. Recently some excellent Lewis pair catalysts for ring-opening polymerization (ROP) of lactide and related cyclic esters have emerged. This review article will highlight the key advances in the ROP catalyzed by Lewis pair compounds with the aim of encouraging the wider application of Lewis pair catalysts in the polymerization of lactide and related cyclic esters.