Polydopamine films and particles with catalytic activity

Synthesis, spectroscopy, band gap energy and electrical conductivity of poly(dopamine-co-aniline) copolymer

Copolymerization is used to improve the solubility and processability of polymers and copolymers includes the individual properties of homopolymer. In this study, the poly(dopamine-co-aniline) (poly(DA-co-ANI) copolymer was synthesized and the UV-vis. absorption, optical band gap energy, fluorescence, FT-IR, SEM-EDS, MALDI-TOF-MS, XRD and electrical conductivity have been investigated. The obtained results for the poly(DA-co-ANI) copolymer were compared with the PDA and PANI homopolymers. It was observed that the poly(DA-co-ANI copolymer is soluble easily in NMP and DMF solvents. The optical band gap energy of the poly(DA-co-ANI) copolymer film were calculated. as 1.00 eV with favorable indirect transition. The poly(DA-co-ANI) copolymer showed the FL emission maximum bands at 390 and 533 nm wavelengths. It was observed from the SEM images that the poly(DA-co-ANI) has 0-1500 nm crystalline rectangular particles prepared in acidic media and 0-600 nm amorphous particles prepared in basic media. The electrical conductivity of the poly(DA-co-ANI) was 1.35 × 10-6 S/cm. In the MALDI-TOF-MS measurements, the number-average molecular weight of the copolymer was found as 2628 Da with a distribution up to 5500 Da. The poly(DA-co-ANI) copolymer, soluble in NMP and DMF solvents and with a low optical band gap energy can be utilized as optical, fluorescent, and semi-conductive material in biomedical applications.

Experimental Methods to Get Polydopamine Films: A Comparative Review on the Synthesis Methods, the Films' Composition and Properties

In 2007, polydopamine (PDA) films were shown to be formed spontaneously on the surface of all known classes of materials by simply dipping those substrates in an aerated dopamine solution at pH = 8.5 in the presence of Tris(hydroxymethyl) amino methane buffer. This universal deposition method has raised a burst of interest in surface science, owing not only to the universality of this water based one pot deposition method but also to the ease of secondary modifications. Since then, PDA films and particles are shown to have applications in energy conversion, water remediation systems, and last but not least in bioscience. The deposition of PDA films from aerated dopamine solutions is however a slow and inefficient process at ambient temperature with most of the formed material being lost as a precipitate. This incited to explore the possibility to get PDA and related films based on other catecholamines, using other oxidants than dissolved oxygen and other deposition methods. Those alternatives to get PDA and related films are reviewed and compared in this paper. It will appear that many more investigations are required to get better insights in the relationships between the preparation method of PDA and the properties of the obtained coatings.

Functionalization of 3D Printed Scaffolds Using Polydopamine and Silver Nanoparticles for Bone-Interfacing Applications

The prevention of bacterial colonization and the stimulation of osseointegration are two major requirements for bone-interfacing materials to reduce the incidence of complications and promote the restoration of the patient's health. The present investigation developed an effective, two-step functionalization of 3D printed scaffolds intended for bone-interfacing applications using a simple polydopamine (PDA) dip-coating method followed by the formation of silver nanoparticles (AgNPs) after a second coating step in silver nitrate. 3D printed polymeric substrates coated with a ∼20 nm PDA layer and 70 nm diameter AgNPs proved effective in hindering Staphylococcus aureus biofilm formation, with a 3000-8000-fold reduction in the number of bacterial colonies formed. The implementation of porous geometries significantly accelerated osteoblast-like cell growth. Microscopy characterization further elucidated homogeneity, features, and penetration of the coating inside the scaffold. A proof-of-concept coating on titanium substrates attests to the transferability of the method to other materials, broadening the range of applications both in and outside the medical sector. The antibacterial efficiency of the coating is likely to lead to a decrease in the number of bacterial infections developed after surgery in the presence of these coatings on prosthetics, thus translating to a reduction in revision surgeries and improved health outcomes.

Surface-facilitated formation of polydopamine and its implications in melanogenesis

This manuscript examines influences of differently functionalized surfaces on the formation of solution-dispersed polydopamine (pDA). Glass vials functionalized with different functional groups provided a set of conditions with which the relationship between the area of active surface and the rate of pDA formation could be systematically studied. The results suggest that charged and polar surfaces accelerate pDA formation in solution, with the effect of -NH₂ surfaces being exceptionally strong. In the vials, pDA formed as both forms of dispersions in solution and films at solid-liquid interface. Further analyses confirmed that both forms of pDA formed with -NH₂ surfaces were chemically similar to conventional pDA synthesized without help of functional surfaces. Among short peptide-based amyloid fibers with defined surface functional groups, and those displaying lysines (-NH₂) greatly accelerated the formation of pDA, consistent with the results of -NH₂-functionalized vials. The results suggest that pDA formation may be facilitated by surface functional groups of solid-liquid interfaces, and have implications for the overlooked roles of amyloid fibers in biological melanogenesis.

Recent progress and future perspectives of polydopamine nanofilms toward functional electrochemical sensors

Since its discovery in 2007, polydopamine nanofilms have been widely used in many areas for surface functionalization. The simple and low-cost preparation method of the nanofilms with tunable thickness can incorporate amine and oxygen-rich chemical groups in virtually any interface. The remarkable advantages of this route have been successfully used in the field of electrochemical sensors. The self-adhesive properties of polydopamine are used to attach nanomaterials onto the electrode's surface and add chemical groups that can be explored to immobilize recognizing species for the development of biosensors. Thus, the combination of 2D materials, nanoparticles, and other materials with polydopamine has been successfully demonstrated to improve the selectivity and sensitivity of electrochemical sensors. In this review, we highlight some interesting properties of polydopamine and some applications where polydopamine plays an important role in the field of electrochemical sensors.

MC1R and melanin-based molecular probes for theranostic of melanoma and beyond

Malignant melanoma is accounting for most of skin cancer-associated mortality. The incidence of melanoma increased every year worldwide especially in western countries. Treatment efficiency is highly related to the stage of melanoma. Therefore, accurate staging and restaging play a pivotal role in the management of melanoma patients. Though 18F-fluorodeoxyglucose (18F-FDG) positron-emission tomography (PET) has been widely used in imaging of tumor metastases, novel radioactive probes for specific targeted imaging of both primary and metastasized melanoma are still desired. Melanocortin receptor 1 (MC1R) and melanin are two promising biomarkers specifically for melanoma, and numerous research groups including us have been actively developing a plethora of radioactive probes based on targeting of MC1R or melanin for over two decades. In this review, some of the MC1R-targeted tracers and melanin-associated molecular imaging probes developed in our research and others have been briefly summarized, and it provides a quick glance of melanoma-targeted probe design and may contribute to further developing novel molecular probes for cancer theranostics.

Fabrication of highly-conductive porous capacitor electrodes by the insertion of Cu-nanoparticles into N-doped flocculated carbon catalysts

In carbon-based electric double-layer capacitors (EDLC), an ideal electrode should have convenient mass transport, ensuring rich porosity and rapid electron transfer, guaranteeing the electrode bulk's high conductivity. In this study, ultrafine Cu nanoparticles inserted carbon flocculation is formed on carbon cloth using polydopamine and cupric chloride precursors via pyrolysis and electrochemical oxidation reaction. As a result, the obtained electrode has a large surface area of 55.5 m²g^-1 and high conductivity of 48.7 S/mm, which shows excellent charge storage capability with high specific capacitance of 3546 mF cm^-2 at a current density of 1 mA cm^-2. Moreover, when the as-prepared electrode is used as electrodes in symmetric EDLC, it can provide a high energy density of 23 mWh cm^-3 with a power density of 179 mW cm^-3, making it as a promising carbon electrode for practical EDLCs.

Copper Electroless Metallization of Cellulose Paper via Polydopamine Coating and Silver Catalyst

The paper presents the results of copper electroless metallization of cellulose paper with the use of a polydopamine coating and silver catalyst. The polydopamine coating was deposited via a simple dip method using a dopamine hydrochloride solution in 10 mM TRIS-HCl buffer with a pH of 8.5. The research showed that as a result of this process, cellulose fibers were covered with a homogeneous layer of polydopamine. The unique properties of the polydopamine coating allowed the reduction of silver ions from silver nitrate solution and the deposition of silver atoms on the paper surface. Deposited silver served as a catalyst in the autocatalytic electroless copper-plating process. The copper layer covered the entire surface of the paper sheet after 5 min of metallization, favorably affecting the electrical properties of this material by lowering the surface resistivity. The deposited copper layer was further characterized by good adhesive strength and high susceptibility to deformation.

Chitosan/Diatom-Biosilica Aerogel with Controlled Porous Structure for Rapid Hemostasis

Uncontrolled hemorrhage is the main reason of possible preventable death after accidental injury. It is necessary to develop a hemostatic agent with rapid hemostatic performance and good biocompatibility. In this study, a chitosan/diatom-biosilica-based aerogel is developed using dopamine as cross-linker by simple alkaline precipitation and tert-butyl alcohol replacement. The chitosan/diatom-biosilica aerogel exhibits favorable biocompatibility and multiscale hierarchical porous structure (from nanometer to micrometer), which can be controlled by the concentration of tert-butyl alcohol. The displacement of tert-butyl alcohol can keep the porosity of diatom-biosilica in aerogel and give it large surface with efficient water absorption ratio. 30% tert-butyl alcohol replacement of aerogel possesses the largest surface area (74.441 m² g^-1 ), water absorption capacity (316.83 ± 2.04%), and excellent hemostatic performance in vitro blood coagulation (≈70 s). Furthermore, this aerogel exhibits the shortest clotting time and lowest blood loss in rat hemorrhage model. The strong interface effect between aerogel and blood is able to promote erythrocytes aggregation, platelets adhesion, and activation, as well as, activate the intrinsic coagulation pathway to accelerate blood coagulation. All the above results demonstrate that chitosan/diatom-biosilica aerogel has great potential to be a safe and rapid hemostatic material.

Synthesis and catalytic performance of polydopamine supported metal nanoparticles

Polydopamine (PDA) is an emerging nature-inspired biopolymer material that possesses many interesting properties including self-assembly and universal adhesion. PDA is also able to form coordination bonds with various metal ions, which can be reduced to metal nanoparticles (NPs) as a result of thermal annealing under protective environment. In this study, PDA has been utilized as a support material to synthesize Pt NPs in an aqueous solution at room temperature. The catalytic performance of the resulting PDA-Pt nanocomposite was evaluated using an electrochemical workstation which showed comparable activity to Pt/C material for hydrogen evolution reaction (HER). Furthermore, Cu, Ni, and Cu-Ni NPs supported on PDA were also obtained using this strategy with assistance of subsequent thermal annealing. The phase evolution of the NPs was studied by in-situ X-ray diffraction while the morphology of the nanoparticles was investigated using electron microscopic techniques. Preliminary results showed the NPs supported on PDA also possessed HER activity. This work demonstrates that PDA can be utilized as a potential support for synthesis of metal NPs that can be exploited in engineering applications such as catalysts.

Surface modification of polypropylene membrane for the removal of iodine using polydopamine chemistry

The development of stable and effective iodine removal systems would be highly desirable in addressing environmental issues relevant to water contamination. In the present research, a novel iodine adsorbent was synthesized by self-polymerization of dopamine (PDA) onto inert polypropylene (PP) membrane. This PP/PDA membrane was thoroughly characterized and its susrface propeties was analyzed by various analytical techniques indcluding field emission scanning electron microscopy (FESEM), atomic force microscopy (AFM), attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), Brunauer-Emmett-Teller (BET) and Barrett-Joyner-Halenda (BJH), contact angle, and surface free energy measurement. The PP/PDA membranes were subsequently used for batchwise removal of iodine at different temperatures (25-70 °C), pH (2-7), and surface areas (1-10 cm²) to understand the underlying adsorption phenomena and to estimate the membrane capacity for iodine uptake. The increase in temperature and pH both led to higher adsorption of iodine. The present approach showed a removal efficiency of over 75% for iodine using 10 cm² PP/PDA membrane (18.87 m² g^-1) within 2 h at moderate temperatures (∼50 °C) and pH > 4, about 15 fold compared to the PP control membrane. The adsorption kinetics and isotherms were well fitted to the pseudo-second-order kinetic and Langmuir isotherm models (R² > 0.99). This adsorbent can be recycled and reused at least six times with stable iodine adsorption. These findings were attributed to the homogenous monolayer adsorption of the iodide on the surface due to the presence of catechol and amine groups in the PP/PDA membrane. This study proposes an efficient adsorbent for iodine removal.

The performance of UiO-66-NH2/graphene oxide (GO) composite membrane for removal of differently charged mixed dyes

The dye wastewater treatment by membrane separation technology has obtained extensive attention in recent years. Nevertheless, it was rare for research on the removal of differently charged mixed dyes. In this study, several UiO-66-NH₂ composite membranes were prepared and optimization experiments were conducted. The performance of composite membranes were evaluated by the removal of cationic (Methylene blue, MB), neutral (Rhodamine B, RB), and anionic (Congo red, CR) dyes. The optimization results demonstrated that the UiO-66-NH₂/graphene oxide (UNG) composite membrane (PUF/PDA/UNG) which was loaded on polyurethane foam modified with polydopamine (PUF/PDA) had the best properties. In filtration experiments, the solution pH exhibited greater effect on the removal efficiency of MB and CR than RB. When NaCl, KCl, CaCl₂ and Na₂SO₄ coexisted in the dye solution, the removal efficiency of MB by PUF/PDA/UNG membrane were 96.62%, 98.17%, 86.39% and 99.34% respectively. The presence of humic acid showed slight inhibitory effect on the removal of MB by PUF/PDA/UNG membrane (71.93%). The experimental results for mixed dyes filtration showed that PUF/PDA/UNG membrane could effectively remove MB, RB and CR in binary (i.e., MB/RB and RB/CR) and ternary (i.e., MB/RB/CR) systems through secondary filtration. And PUF/PDA/UNG membrane could remove MB and CR simultaneously through one-time filtration in MB/CR binary system. The removal mechanism was mainly attributed to the aggregation of mixed dyes, electrostatic interaction between dye molecules and the membrane surface, and hydrogen bonding. All results suggested that the as-prepared PUF/PDA/UNG membrane have great potential in practical treatment of dye wastewater.

Colorimetric detection of blood glucose based on GOx@ZIF-8@Fe-polydopamine cascade reaction

Zeolitic imidazolate framework-8 (ZIF-8) has become one of the most typical examples of nanostructures for multi-enzyme immobilization due to its economical, mild and easy synthesis process. However, ZIF-8 nanocrystals are easily decomposed under acidic conditions. To solve this problem, the Fe-polydopamine (Fe-PDA) was bonded with ZIF-8 surface to form ZIF-8@Fe-PDA hybrid shell with good stability. Based on this, we developed glucose oxidase@ZIF-8@Fe-PDA (GOx@ZIF-8@Fe-PDA) integrated nanozymes (INAzymes) with cascade reactions via a mild and environmentally friendly method. In order to synthesize the INAzymes, GOx was first embedded in ZIF-8 by coprecipitation (GOx@ZIF-8), and then GOx@ZIF-8 was bonded with Fe-PDA, which acted as a peroxidase mimic. The ZIF-8@Fe-PDA hybrid shell protected the INAzymes nanostructure from degradation under acidic conditions, which results in good chemical stability of the GOx@ZIF-8@Fe-PDA. In the INAzymes system, glucose is converted to gluconic acid by GOx in the presence of oxygen to produce H₂O₂ as an intermediate. The H₂O₂ reacts rapidly with Fe-PDA to generate OH, which oxidizes 3,3',5,5'-tetramethylbenzidine (TMB). The UV absorbance of oxidized TMB is directly proportional to the glucose concentration, and has a good linear relationship in the range of 5.0-100.0 μM glucose with detection limit of 1.1 μM. The INAzymes system has been successfully applied to rapid colorimetric detection of blood glucose levels. The INAzymes system exhibits high catalytic activity, excellent sensitivity, and enhanced chemical stability, playing great promise in clinical diagnosis and biosensing.

Polydopamine Nanoparticles Prepared Using Redox-Active Transition Metals

Autoxidation of dopamine to polydopamine by dissolved oxygen is a slow process that requires highly alkaline conditions. Polydopamine can be formed rapidly also in mildly acidic and neutral solutions by using redox-active transition-metal ions. We present a comparative study of polydopamine nanoparticles formed by autoxidation and aerobic or anaerobic oxidation in the presence of Ce(IV), Fe(III), Cu(II), and Mn(VII). The UV-vis spectra of the purified nanoparticles are similar, and dopaminechrome is an early intermediate species. At low pH, Cu(II) requires the presence of oxygen and chloride ions to produce polydopamine at a reasonable rate. The changes in dispersibility and surface charge take place at around pH 4, which indicates the presence of ionizable groups, especially carboxylic acids, on their surface. X-ray photoelectron spectroscopy shows the presence of three different classes of carbons, and the carbonyl/carboxylate carbons amount to 5-15 atom %. The N 1s spectra show the presence of protonated free amino groups, suggesting that these groups may interact with the π-electrons of the intact aromatic dihydroxyindole moieties, especially in the metal-induced samples. The autoxidized and Mn(VII)-induced samples do not contain metals, but the metal content is 1-2 atom % in samples prepared with Ce(IV) or Cu(II), and ca. 20 atom % in polydopamine prepared in the presence of Fe(III). These differences in the metal content can be explained by the oxidation and complexation properties of the metals using the general model developed. In addition, the nitrogen content is lower in the metal-induced samples. All of the metal oxidants studied can be used to rapidly prepare polydopamine at room temperature, but the possible influence of the metal content and nitrogen loss should be taken into account.

A body temperature and water-induced shape memory hydrogel with excellent mechanical properties

A body temperature and water-induced shape memory hydrogel with excellent mechanical properties was prepared by crosslinking dopamine-terminated tetra-poly(ethylene glycol) with an oxidation reaction.

Facile synthesis of ultrasmall polydopamine-polyethylene glycol nanoparticles for cellular delivery

Very small polydopamine (PDA) polyethylene glycol (PEG) crosslinked copolymer (PDA-PEG) nanoparticles have been prepared following a convenient one-step procedure in aqueous solution. Particle sizes and colloidal stabilities have been optimized by varying PEG in view of chain length and end group functionalities. In particular, amine-terminated PEG3000 [PEG₃₀₀₀(NH₂)₂] reacted with polydopamine intermediates so that very small, crosslinked PDA-PEG nanoparticles with sizes of less than 50 nm were formed. These nanoparticles remained stable in buffer solution and no sedimentation occurred. Chemical functionalization was straight-forward as demonstrated by the attachment of fluorescent dyes. The PDA-PEG nanoparticles revealed efficient cellular uptake via endocytosis and high cytocompatibility, thus rendering them attractive candidates for cell imaging or for drug delivery applications.

Characteristics of binary WO3@CuO and ternary WO3@PDA@CuO based on impressive sensing acetone odor

A series of biomimetic electronic nose nanomaterials of WO₃, WO₃@PDA, WO₃@PDA@CuO, WO₃@CuO and CuO were prepared by a facile method and their microstructures, surface chemical composition and sensing ability for acetone odor were investigated systematically by a variety of technologies. The WO₃@PDA@CuO and WO₃@CuO particles are in nano-sized shape, about 20 nm. The sensing ability to different concentrations acetone odor (50, 100 and 200 ppm) is addressed. The effect of different sensitivity definitions (R_g/R_a or |R_a - R_g|/R_a × 100%) on the comparison of experiment results is discussed. The WO₃@CuO sensing material shows the best sensing performance of all the sensors, being independent of concentration or sensitivity definitions. These results provide novel insights into the design and preparation of composite electronic nose sensing nanomaterials.