Conversion of CO2 to C1 chemicals: Catalyst design, kinetics and mechanism aspects of the reactions

Multiscale Investigation of the Mechanism and Selectivity of CO2 Hydrogenation over Rh(111)

CO2 hydrogenation over Rh catalysts comprises multiple reaction pathways, presenting a wide range of possible intermediates and end products, with selectivity toward either CO or methane being of particular interest. We investigate in detail the reaction mechanism of CO2 hydrogenation to the single-carbon (C1) products on the Rh(111) facet by performing periodic density functional theory (DFT) calculations and kinetic Monte Carlo (kMC) simulations, which account for the adsorbate interactions through a cluster expansion approach. We observe that Rh readily facilitates the dissociation of hydrogen, thus contributing to the subsequent hydrogenation processes. The reverse water-gas shift (RWGS) reaction occurs via three different reaction pathways, with CO hydrogenation to the COH intermediate being a key step for CO2 methanation. The effects of temperature, pressure, and the composition ratio of the gas reactant feed are considered. Temperature plays a pivotal role in determining the surface coverage and adsorbate composition, with competitive adsorption between CO and H species influencing the product distribution. The observed adlayer configurations indicate that the adsorbed CO species are separated by adsorbed H atoms, with a high ratio of H to CO coverage on the Rh(111) surface being essential to promote CO2 methanation.

Mitigating the Poisoning Effect of Formate during CO2 Hydrogenation to Methanol over Co-Containing Dual-Atom Oxide Catalysts

During the hydrogenation of CO2 to methanol over mixed-oxide catalysts, the strong adsorption of CO2 and formate poses a barrier for H2 dissociation, limiting methanol selectivity and productivity. Here we show that by using Co-containing dual-atom oxide catalysts, the poisoning effect can be countered by separating the site for H2 dissociation and the adsorption of intermediates. We synthesized a Co- and In-doped ZrO2 catalyst (Co-In-ZrO2) containing atomically dispersed Co and In species. Catalyst characterization showed that Co and In atoms were atomically dispersed and were in proximity to each other owing to a random distribution. During the CO2 hydrogenation reaction, the Co atom was responsible for the adsorption of CO2 and formate species, while the nearby In atoms promoted the hydrogenation of adsorbed intermediates. The cooperative effect increased the methanol selectivity to 86% over the dual-atom catalyst, and methanol productivity increased 2-fold in comparison to single-atom catalysts. This cooperative effect was extended to Co-Zn and Co-Ga doped ZrO2 catalysts. This work presents a different approach to designing mixed-oxide catalysts for CO2 hydrogenation based on the preferential adsorption of substrates and intermediates instead of promoting H2 dissociation to mitigate the poisonous effects of substrates and intermediates.

Nanoreactor Engineering Can Unlock New Possibilities for CO2 Tandem Catalytic Conversion to C-C Coupled Products

Climate change is becoming increasingly more pronounced every day while the amount of greenhouse gases in the atmosphere continues to rise. CO2 reduction to valuable chemicals is an approach that has gathered substantial attention as a means to recycle these gases. Herein, some of the tandem catalysis approaches that can be used to achieve the transformation of CO2 to C-C coupled products are explored, focusing especially on tandem catalytic schemes where there is a big opportunity to improve performance by designing effective catalytic nanoreactors. Recent reviews have highlighted the technical challenges and opportunities for advancing tandem catalysis, especially highlighting the need for elucidating structure-activity relationships and mechanisms of reaction through theoretical and in situ/operando characterization techniques. In this review, the focus is on nanoreactor synthesis strategies as a critical research direction, and discusses these in the context of two main tandem pathways (CO-mediated pathway and Methanol-mediated pathway) to C-C coupled products.

Polymer-derived SiOC as support material for Ni-based catalysts: CO2 methanation performance and effect of support modification with La2O3

In this study, we investigated Ni supported on polymer-derived ceramics as a new class of catalyst materials. Catalysts have to withstand harsh reaction conditions requiring the use of a support with outstanding thermal and mechanical stability. Polymer-derived ceramics meet these requirements and bring the additional opportunity to realize complex porous structures. Ni-SiOC and La-modified Ni-SiOC catalysts were prepared by wet impregnation methods with target concentrations of 5 wt% for both metal and oxide content. Polymer-derived SiOC supports were produced using a photoactive methyl-silsesquioxane as preceramic polymer. Catalysts were characterized by N₂-adsorption-desorption, XRD, SEM, H₂-TPR, and in-situ DRIFTS. CO₂ methanation was performed as a test reaction to evaluate the catalytic performance of these new materials at atmospheric pressure in the temperature range between 200°C and 400°C. XDR, H₂-TPR, and in-situ DRIFTS results indicate both improved dispersion and stability of Ni sites and increased adsorption capacities for CO₂ in La-modified samples. Also, modified catalysts exhibited excellent performance in the CO₂ methanation with CO₂ conversions up to 88% and methane selectivity >99% at 300°C reaction temperature. Furthermore, the pyrolysis temperature of the support material affected the catalytic properties, the surface area, the stability of active sites, and the hydrophobicity of the surface. Overall, the materials show promising properties for catalytic applications.

Synthesis, characterization and application of oxovanadium(iv) complexes with [NNO] donor ligands: X-ray structures of their corresponding dioxovanadium(v) complexes

Two oxovanadium(iv) complexes ligated by [NNO] donor ligands have been synthesized and characterized by ESI-HRMS, elemental (CHN) analysis and spectroscopic (UV-Vis, IR and EPR) techniques. Block shaped brown crystals from the methanolic solutions of these oxovanadium(iv) complexes were obtained during the crystallization process. Crystallographic structures of the resulting crystals revealed that the original oxovanadium(iv) complexes have been transformed into new dioxovanadium(v) complexes with concomitant oxidation of VIV to VV. The original oxovanadium(iv) complexes have been identified to be an efficient catalyst for the CO2 cycloaddition reaction with epoxides resulting up to 100% cyclic carbonate products. The geometries of oxovanadium(iv) complexes are optimized by the density functional theory (DFT) calculations at the uB3LYP/6-31G**/LANL2DZ level of theory. The geometry and structural parameters of optimized structures of oxovanadium(iv) complexes are in excellent agreement with the parameters of X-ray structures of their dioxovanadium(v) counterparts. Further, TD-DFT and Spin Density Plots for the oxovanadium(iv) complexes are performed in order to get more insights about their electronic absorption and EPR spectroscopies, respectively.

Dielectric Barrier Discharge Plasma-Assisted Catalytic CO2 Hydrogenation: Synergy of Catalyst and Plasma

CO2 hydrogenation is an effective way to convert CO2 to value-added chemicals (e.g., CH4 and CH3OH). As a thermal catalytic process, it suffers from dissatisfactory catalytic performances (low conversion/selectivity and poor stability) and high energy input. By utilizing the dielectric barrier discharge (DBD) technology, the catalyst and plasma could generate a synergy, activating the whole process in a mild condition, and enhancing the conversion efficiency of CO2 and selectivity of targeted product. In this review, a comprehensive summary of the applications of DBD plasma in catalytic CO2 hydrogenation is provided in detail. Moreover, the state-of-the-art design of the reactor and optimization of reaction parameters are discussed. Furthermore, several mechanisms based on simulations and experiments are provided. In the end, the existing challenges of this hybrid system and corresponding solutions are proposed.

Mechanism of CO2 hydrogenation over a Zr1–Cu single-atom catalyst

The reaction mechanisms of methanol synthesis from CO2 hydrogenation on a Zr1–Cu surface are investigated using density functional theory calculations.

Mechanistic and multiscale aspects of thermo-catalytic CO2 conversion to C1 products

The increasing environmental concerns due to anthropogenic CO2 emissions have called for an alternate sustainable source to fulfill rising chemical and energy demands and reduce environmental problems. The thermo-catalytic activation and conversion of abundantly available CO2, a thermodynamically stable and kinetically inert molecule, can significantly pave the way to sustainably produce chemicals and fuels and mitigate the additional CO2 load. This can be done through comprehensive knowledge and understanding of catalyst behavior, reaction kinetics, and reactor design. This review aims to catalog and summarize the advances in the experimental and theoretical approaches for CO2 activation and conversion to C1 products via heterogeneous catalytic routes. To this aim, we analyze the current literature works describing experimental analyses (e.g., catalyst characterization and kinetics measurement) as well as computational studies (e.g., microkinetic modeling and first-principles calculations). The catalytic reactions of CO2 activation and conversion reviewed in detail are: (i) reverse water-gas shift (RWGS), (ii) CO2 methanation, (iii) CO2 hydrogenation to methanol, and (iv) dry reforming of methane (DRM). This review is divided into six sections. The first section provides an overview of the energy and environmental problems of our society, in which promising strategies and possible pathways to utilize anthropogenic CO2 are highlighted. In the second section, the discussion follows with the description of materials and mechanisms of the available thermo-catalytic processes for CO2 utilization. In the third section, the process of catalyst deactivation by coking is presented, and possible solutions to the problem are recommended based on experimental and theoretical literature works. In the fourth section, kinetic models are reviewed. In the fifth section, reaction technologies associated with the conversion of CO2 are described, and, finally, in the sixth section, concluding remarks and future directions are provided.

Catalytic Reductive Alcohol Etherifications with Carbonyl-Based Compounds or CO2 and Related Transformations for the Synthesis of Ether Derivatives

Ether derivatives have myriad applications in several areas of chemical industry and academia. Hence, the development of more effective and sustainable protocols for their production is highly desired. Among the different methodologies reported for ether synthesis, catalytic reductive alcohol etherifications with carbonyl-based moieties (aldehydes/ketones and carboxylic acid derivatives) have emerged in the last years as a potential tool. These processes constitute appealing routes for the selective production of both symmetrical and asymmetrical ethers (including O-heterocycles) with an increased molecular complexity. Likewise, ester-to-ether catalytic reductions and hydrogenative alcohol etherifications with CO2 to dialkoxymethanes and other acetals, albeit in less extent, have undergone important advances, too. In this Review, an update of the recent progresses in the area of catalytic reductive alcohol etherifications using carbonyl-based compounds and CO2 have been described with a special focus on organic synthetic applications and catalyst design. Complementarily, recent progress made in catalytic acetal/ketal-to-ether or ester-to-ether reductions and other related transformations have been also summarized.

Highly Dispersed Molybdenum Oxycarbide Clusters Supported on Multilayer Graphene for the Selective Reduction of Carbon Dioxide

Molybdenum oxycarbide clusters are novel nanomaterials that exhibit attractive catalytic activity; however, the methods for their production are currently very restrictive. This work represents a new strategy for the creation of near-subnanometer size molybdenum oxycarbide clusters on multilayer graphene. To adsorb Mo-based polyoxometalates of the type [PMo₁₂ O₄₀ ]^3- as a precursor for Mo oxycarbide clusters, the novel tripodal-phenyl cation N,N,N-tri(4-phenylbutyl)-N-methylammonium ([TPBMA]⁺ ) is synthesized. [TPBMA]⁺ exhibits superior adsorption on multilayer graphene compared to commercially available cations such as tetrabutylammonium ([nBu₄ N]⁺ ) and tetraphenylphosphonium ([PPh₄ ]⁺ ). Using [TPBMA]⁺ as an anchor, highly dispersed precursor clusters (diameter: 1.0 ± 0.2 nm) supported on multilayer graphene are obtained, as confirmed by high-resolution scanning transmission electron microscopy. Remarkably, this new material achieves the catalytic reduction of CO₂ to selectively produce CO (≈99.9%) via the reverse water-gas-shift reaction, by applying carbothermal hydrogen reduction to generate Mo oxycarbide clusters in situ.

Impact of structure, doping and defect-engineering in 2D materials on CO2 capture and conversion

2D material based strategies for adsorption and conversion of CO2 to value-added products.

Recent Progresses in Constructing the Highly Efficient Ni Based Catalysts With Advanced Low-Temperature Activity Toward CO2 Methanation

With the development and prosperity of the global economy, the emission of carbon dioxide (CO2) has become an increasing concern. Its greenhouse effect will cause serious environmental problems, such as the global warming and climate change. Therefore, the worldwide scientists have devoted great efforts to control CO2 emissions through various strategies, such as capture, resource utilization, sequestration, etc. Among these, the catalytic conversion of CO2 to methane is considered as one of the most efficient routes for resource utilization of CO2 owing to the mild reaction conditions and simple reaction device. Pioneer thermodynamic studies have revealed that low reaction temperature is beneficial to the high catalytic activity and CH4 selectivity. However, the low temperature will be adverse to the enhancement of the reaction rate due to kinetic barrier for the activation of CO2. Therefore, the invention of highly efficient catalysts with promising low temperature activities toward CO2 methanation reaction is the key solution. The Ni based catalysts have been widely investigated as the catalysts toward CO2 methanation due to their low cost and excellent catalytic performances. However, the Ni based catalysts usually perform poor low-temperature activities and stabilities. Therefore, the development of highly efficient Ni based catalysts with excellent low-temperature catalytic performances has become the research focus as well as challenge in this field. Therefore, we summarized the recent research progresses of constructing highly efficient Ni based catalysts toward CO2 methanation in this review. Specifically, the strategies on how to enhance the catalytic performances of the Ni based catalysts have been carefully reviewed, which include various influencing factors, such as catalytic supports, catalytic auxiliaries and dopants, the fabrication methods, reaction conditions, etc. Finally, the future development trend of the Ni based catalysts is also prospected, which will be helpful to the design and fabrication of the Ni catalysts with high efficiency toward CO2 methanation process.

Al2O3-Coated Ni/CeO2 nanoparticles as coke-resistant catalyst for dry reforming of methane

To mitigate catalyst deactivation during the dry reforming of methane, Ni/CeO₂ catalysts composed of monodisperse Ni nanoparticles supported on CeO₂ nanorods are designed and coated with Al₂O₃ layers by atomic layer deposition.

Core–shell structured catalysts for thermocatalytic, photocatalytic, and electrocatalytic conversion of CO2

An in-depth assessment of properties of core–shell catalysts and their application in the thermocatalytic, photocatalytic, and electrocatalytic conversion of CO₂into synthesis gas and valuable hydrocarbons.