Towards synthesis of monoterpenes and derivatives using synthetic biology

ATP biosensor reveals microbial energetic dynamics and facilitates bioproduction

Adenosine-5'-triphosphate (ATP), the primary energy currency in cellular processes, drives metabolic activities and biosynthesis. Despite its importance, understanding intracellular ATP dynamics' impact on bioproduction and exploiting it for enhanced bioproduction remains largely unexplored. Here, we harness an ATP biosensor to dissect ATP dynamics across different growth phases and carbon sources in multiple microbial strains. We find transient ATP accumulations during the transition from exponential to stationary growth phases in various conditions, coinciding with fatty acid (FA) and polyhydroxyalkanoate (PHA) production in Escherichia coli and Pseudomonas putida, respectively. We identify carbon sources (acetate for E. coli, oleate for P. putida) that elevate steady-state ATP levels and boost FA and PHA production. Moreover, we employ ATP dynamics as a diagnostic tool to assess metabolic burden, revealing bottlenecks that limit limonene bioproduction. Our results not only elucidate the relationship between ATP dynamics and bioproduction but also showcase its value in enhancing bioproduction in various microbial species.

Study of the post-harvest processes of the peruvian chuncho cocoa using multivariate and multi-block analysis

A screening of 24 Chuncho cacao postharvest processes was carried out and three treatments were identified with the best levels of functional non-volatile metabolites and the best profile of volatile metabolites. The relationship between the sensory profile of flavor and aroma, volatile and non-volatile metabolites was investigated by multiblock analysis. The most prominent volatile metabolites were benzaldehyde (Bz), 2,3,5-trimethylpyrazine (TriMP), 2,3,5,6-tetramethylpyrazine (TetraMP), myrcene (Myr), limonene (LM), ethylphenyl acetate (EpHAc) and 2-phenylethyl acetate (pHEthAc), and functional nonvolatile metabolites were total flavonoids (Tflav), total polyphenols (TppH), catechins (Cat), epicatechin (EpCat), caffeine (Caf), and theobromine (TeoB). Sensory analysis by MFA (multiple factorial analysis) allowed checking the substrates of the metabolites and highlighting correlated flavor and aroma descriptors. Based on multiblock analysis, four new descriptors were identified for Bz, Myr, and LM, such as nut, astringent, bitter, and crude. For TetraMP the fruity flavor was identified and for TriMP it was identified as Malt flavor. For Cat, EpCat, Caf, TeoB, Tflav, and TppH, the descriptors bitter, astringent, floral, and fruity were identified. This study will allow Chuncho cocoa farmers and producers to have a cocoa paste production scheme with a high value of functional metabolites and sensory profile, and value this Peruvian accession.

Decoding Catalysis by Terpene Synthases

The review by Christianson, published in 2017 on the twentieth anniversary of the emergence of the field, summarizes the foundational discoveries and key advances in terpene synthase/cyclase (TS) biocatalysis (Christianson, D. W. Chem Rev2017, 117 (17), 11570-11648. DOI: 10.1021/acs.chemrev.7b00287). Here, we review the TS literature published since then, bringing the field up to date and looking forward to what could be the near future of TS rational design. Many revealing discoveries have been made in recent years, building on the knowledge and fundamental principles uncovered during those initial two decades of study. We use these to explore TS reaction chemistry and see how a combined experimental and computational approach helps to decipher the complexities of TS catalysis. Revealed are a suite of catalytic motifs which control product outcome in TSs, some obvious, some more subtle. We examine each in detail, using the most recent papers and insights to illustrate how exactly this fascinating class of enzymes takes a single acyclic substrate and turns it into the many thousands of complex terpenoids found in Nature. We then explore some of the recent strategies for TS engineering, including machine learning and other data-driven approaches. From this, rational and predictive engineering of TSs, "designer terpene synthases", will begin to emerge as a realistic goal.

Plant anthraquinones: Classification, distribution, biosynthesis, and regulation

Anthraquinones are polycyclic compounds with an unsaturated diketone structure (quinoid moiety). As important secondary metabolites of plants, anthraquinones play an important role in the response of many biological processes and environmental factors. Anthraquinones are common in the human diet and have a variety of biological activities including anticancer, antibacterial, and antioxidant activities that reduce disease risk. The biological activity of anthraquinones depends on the substitution pattern of their hydroxyl groups on the anthraquinone ring structure. However, there is still a lack of systematic summary on the distribution, classification, and biosynthesis of plant anthraquinones. Therefore, this paper systematically reviews the research progress of the distribution, classification, biosynthesis, and regulation of plant anthraquinones. Additionally, we discuss future opportunities in anthraquinone research, including biotechnology, therapeutic products, and dietary anthraquinones.

A chromosome-level genome assembly reveals that a bipartite gene cluster formed via an inverted duplication controls monoterpenoid biosynthesis in Schizonepeta tenuifolia

Biosynthetic gene clusters (BGCs) are regions of a genome where genes involved in a biosynthetic pathway are in proximity. The origin and evolution of plant BGCs as well as their role in specialized metabolism remain largely unclear. In this study, we have assembled a chromosome-scale genome of Japanese catnip (Schizonepeta tenuifolia) and discovered a BGC that contains multiple copies of genes involved in four adjacent steps in the biosynthesis of p-menthane monoterpenoids. This BGC has an unprecedented bipartite structure, with mirrored biosynthetic regions separated by 260 kilobases. This bipartite BGC includes identical copies of a gene encoding an old yellow enzyme, a type of flavin-dependent reductase. In vitro assays and virus-induced gene silencing revealed that this gene encodes the missing isopiperitenone reductase. This enzyme evolved from a completely different enzyme family to isopiperitenone reductase from closely related Mentha spp., indicating convergent evolution of this pathway step. Phylogenomic analysis revealed that this bipartite BGC has emerged uniquely in the S. tenuifolia lineage and through insertion of pathway genes into a region rich in monoterpene synthases. The cluster gained its bipartite structure via an inverted duplication. The discovered bipartite BGC for p-menthane biosynthesis in S. tenuifolia has similarities to the recently described duplicated p-menthane biosynthesis gene pairs in the Mentha longifolia genome, providing an example of the convergent evolution of gene order. This work expands our understanding of plant BGCs with respect to both form and evolution, and highlights the power of BGCs for gene discovery in plant biosynthetic pathways.

Perfume Guns: Potential of Yeast Volatile Organic Compounds in the Biological Control of Mycotoxin-Producing Fungi

Pathogenic fungi in the genera Alternaria, Aspergillus, Botrytis, Fusarium, Geotrichum, Gloeosporium, Monilinia, Mucor, Penicillium, and Rhizopus are the most common cause of pre- and postharvest diseases of fruit, vegetable, root and grain commodities. Some species are also able to produce mycotoxins, secondary metabolites having toxic effects on human and non-human animals upon ingestion of contaminated food and feed. Synthetic fungicides still represent the most common tool to control these pathogens. However, long-term application of fungicides has led to unacceptable pollution and may favour the selection of fungicide-resistant mutants. Microbial biocontrol agents may reduce the incidence of toxigenic fungi through a wide array of mechanisms, including competition for the ecological niche, antibiosis, mycoparasitism, and the induction of resistance in the host plant tissues. In recent years, the emission of volatile organic compounds (VOCs) has been proposed as a key mechanism of biocontrol. Their bioactivity and the absence of residues make the use of microbial VOCs a sustainable and effective alternative to synthetic fungicides in the management of postharvest pathogens, particularly in airtight environments. In this review, we will focus on the possibility of applying yeast VOCs in the biocontrol of mycotoxigenic fungi affecting stored food and feed.

Enzymatic Hydrolysis of Textile and Cardboard Waste as a Glucose Source for the Production of Limonene in Escherichia coli

Cellulose containing textiles (cotton) and cardboard/carton waste represent a large reservoir of untapped organic carbon. These wastes have enormous potential for use as carbon feedstock in industrial biotechnological processes. Essentially, cotton/cardboard (CC) waste is pure cellulose (with some additives) in the form of polymerised glucose consisting of β-(1→4)-linked D-glucose subunits. One of the largest and most diverse classes of natural chemicals that can be produced from glucose are terpenes with a wide range of applications as flavours, fragrances, pharmaceuticals, biopesticides, and biofuels. Here we have investigated the bioconversion of CC waste into the exemplary terpene limonene as a proof of concept. Six different CC waste streams were enzymatically hydrolysed and used to produce limonene using the Escherichia coli (E. coli) microbial cell factory. The D-glucose content in the CC hydrolysate (glucose juice) was determined and then metabolised by E. coli via a manipulated heterogeneous biolipid synthesis pathway (the mevalonate pathway) to produce limonene. This study represents an important proof of concept for the production of terpenes from hydrolysed CC waste streams.

Allelopathic Properties of Lamiaceae Species: Prospects and Challenges to Use in Agriculture

Herbicide resistance due to the increasing reliance on herbicides is a near-term challenge for the world’s agriculture. This has led to a desire to develop new herbicides with a novel mode of action, to address resistance in weed species. Lamiaceae, a large dicotyledonous plant family, is very well known for the multitudinous pharmacological and toxicological properties of its member species. Moreover, many species of this family are significant for their allelopathic activity in natural and laboratory settings. Thus, plants in Lamiaceae have the potential to be sources of alternative herbicides. However, gaps in our knowledge need to be addressed prior to adopting these allelopathic activities in agriculture. Therefore, we review the existing state of knowledge about the Lamiaceae family, the reported allelopathic properties of plant extracts, and their isolated allelochemicals under laboratory, greenhouse, and field conditions. In addition, we offer a perspective on existing challenges and future opportunities for adopting the allelopathic properties of Lamiaceae plant species for green agriculture.

Compartmentalization and transporter engineering strategies for terpenoid synthesis

Microbial cell factories for terpenoid synthesis form a less expensive and more environment-friendly approach than chemical synthesis and extraction, and are thus being regarded as mainstream research recently. Organelle compartmentalization for terpenoid synthesis has received much attention from researchers owing to the diverse physiochemical characteristics of organelles. In this review, we first systematically summarized various compartmentalization strategies utilized in terpenoid production, mainly plant terpenoids, which can provide catalytic reactions with sufficient intermediates and a suitable environment, while bypassing competing metabolic pathways. In addition, because of the limited storage capacity of cells, strategies used for the expansion of specific organelle membranes were discussed. Next, transporter engineering strategies to overcome the cytotoxic effects of terpenoid accumulation were analyzed. Finally, we discussed the future perspectives of compartmentalization and transporter engineering strategies, with the hope of providing theoretical guidance for designing and constructing cell factories for the purpose of terpenoid production.

Alternative metabolic pathways and strategies to high-titre terpenoid production in Escherichia coli

Covering: up to 2021Terpenoids are a diverse group of chemicals used in a wide range of industries. Microbial terpenoid production has the potential to displace traditional manufacturing of these compounds with renewable processes, but further titre improvements are needed to reach cost competitiveness. This review discusses strategies to increase terpenoid titres in Escherichia coli with a focus on alternative metabolic pathways. Alternative pathways can lead to improved titres by providing higher orthogonality to native metabolism that redirects carbon flux, by avoiding toxic intermediates, by bypassing highly-regulated or bottleneck steps, or by being shorter and thus more efficient and easier to manipulate. The canonical 2-C-methyl-D-erythritol 4-phosphate (MEP) and mevalonate (MVA) pathways are engineered to increase titres, sometimes using homologs from different species to address bottlenecks. Further, alternative terpenoid pathways, including additional entry points into the MEP and MVA pathways, archaeal MVA pathways, and new artificial pathways provide new tools to increase titres. Prenyl diphosphate synthases elongate terpenoid chains, and alternative homologs create orthogonal pathways and increase product diversity. Alternative sources of terpenoid synthases and modifying enzymes can also be better suited for E. coli expression. Mining the growing number of bacterial genomes for new bacterial terpenoid synthases and modifying enzymes identifies enzymes that outperform eukaryotic ones and expand microbial terpenoid production diversity. Terpenoid removal from cells is also crucial in production, and so terpenoid recovery and approaches to handle end-product toxicity increase titres. Combined, these strategies are contributing to current efforts to increase microbial terpenoid production towards commercial feasibility.

Identification of (-)-bornyl diphosphate synthase from Blumea balsamifera and its application for (-)-borneol biosynthesis in Saccharomyces cerevisiae

Borneol is a precious monoterpenoid with two chiral structures, (-)-borneol and (+)-borneol. Bornyl diphosphate synthase is the key enzyme in the borneol biosynthesis pathway. Many (+)-bornyl diphosphate synthases have been reported, but no (-)-bornyl diphosphate synthases have been identified. Blumea balsamifera leaves are rich in borneol, almost all of which is (-)-borneol. In this study, we identified a high-efficiency (-)-bornyl diphosphate synthase (BbTPS3) from B. balsamifera that converts geranyl diphosphate (GPP) to (-)-bornyl diphosphate, which is then converted to (-)-borneol after dephosphorylation in vitro. BbTPS3 exhibited a K_m value of 4.93 ± 1.38 μM for GPP, and the corresponding k_cat value was 1.49 s⁻¹. Multiple strategies were applied to obtain a high-yielding (-)-borneol producing yeast strain. A codon-optimized BbTPS3 protein was introduced into the GPP high-yield strain MD, and the resulting MD-B1 strain produced 1.24 mg·L^-1 (-)-borneol. After truncating the N-terminus of BbTPS3 and adding a Kozak sequence, the (-)-borneol yield was further improved by 4-fold to 4.87 mg·L^-1. Moreover, the (-)-borneol yield was improved by expressing the fusion protein module of ERG20^F96W-N127W-YRSQI-t14-BbTPS3K2, resulting in a final yield of 12.68 mg·L^-1 in shake flasks and 148.59 mg·L^-1 in a 5-L bioreactor. This work is the first reported attempt to produce (-)-borneol by microbial fermentation.

Paeoniflorin in Paeoniaceae: Distribution, influencing factors, and biosynthesis

Paeoniflorin, a monoterpene glucoside, is increasingly used in the clinical treatment of many diseases because it has a variety of pharmacological activities. Besides, paeoniflorin has been considered the characteristic chemical constituent of Paeoniaceae plants since it was first reported in 1963. Therefore, how to better develop and utilize paeoniflorin in Paeoniaceae has always been a research hotspot. We reviewed the current knowledge on paeoniflorin in Paeoniaceae, with particular emphasis on its distribution and influencing factors. Moreover, the limited understanding of the biosynthesis pathway has restricted the production of paeoniflorin by synthetic biology. This review provides insights into the post-modification pathway of paeoniflorin biosynthesis and proposes directions for further analysis in the future.

Thermodynamics of the Isomerization of Monoterpene Epoxides

In this contribution, the thermodynamic analysis of α- and β-pinene epoxide isomerization over Fe and Cu supported on MCM-41 is presented using computational chemistry and group contribution methods (GCMs). Some physical-chemical data (T c, P c, v c, Z c, ω, T b, T fus) and thermodynamic (S°298.15, C p,298.15 °, C v,298.15 °, ΔH f,298.15 °, ΔG f,298.15 °, ΔH vb °, ΔH fus, C pL) properties obtained by different GCMs are reported for several monoterpenes and monoterpenoids, which significantly contribute to the knowledge of the properties of these compounds. Density functional theory (DFT), PBE-D3/6-311G(d,p), was employed for determining the Gibbs free energy and the heat of reaction associated with the transformation of monoterpene epoxides into aldehydes, ketones, and related oxygenated compounds in the presence of different solvents and at several temperatures. The calculations were compared with available data reported and the experimental results of the catalytic reactions. The transformation of α- and β-pinene epoxides into aldehydes appears to be more spontaneous and favorable than their transformations into alcohols in a wide range of temperatures. These results are in agreement with the experiments over Fe/MCM-41 and Cu/MCM-41, where α-pinene epoxide isomerization yields campholenic aldehyde (50-80% selectivity) as the main product. The 1.7Fe/MCM-41 material was more active in all solvents than 1.3Cu/MCM-41 for both α- and β-pinene epoxide isomerization. However, perillyl alcohol (20-70% selectivity) was the most favored for the isomerization reaction, except when ethyl acetate was the solvent. Enthalpy and Gibbs free energy of the studied reactions estimated by both GCMs and DFT calculations did not show large differences for most of the reactions at evaluated temperatures.

Functional Characterization and Structural Insights Into Stereoselectivity of Pulegone Reductase in Menthol Biosynthesis

Monoterpenoids are the main components of plant essential oils and the active components of some traditional Chinese medicinal herbs like Mentha haplocalyx Briq., Nepeta tenuifolia Briq., Perilla frutescens (L.) Britt and Pogostemin cablin (Blanco) Benth. Pulegone reductase is the key enzyme in the biosynthesis of menthol and is required for the stereoselective reduction of the Δ^2,8 double bond of pulegone to produce the major intermediate menthone, thus determining the stereochemistry of menthol. However, the structural basis and mechanism underlying the stereoselectivity of pulegone reductase remain poorly understood. In this study, we characterized a novel (-)-pulegone reductase from Nepeta tenuifolia (NtPR), which can catalyze (-)-pulegone to (+)-menthone and (-)-isomenthone through our RNA-seq, bioinformatic analysis in combination with in vitro enzyme activity assay, and determined the structure of (+)-pulegone reductase from M. piperita (MpPR) by using X-ray crystallography, molecular modeling and docking, site-directed mutagenesis, molecular dynamics simulations, and biochemical analysis. We identified and validated the critical residues in the crystal structure of MpPR involved in the binding of the substrate pulegone. We also further identified that residues Leu56, Val282, and Val284 determine the stereoselectivity of the substrate pulegone, and mainly contributes to the product stereoselectivity. This work not only provides a starting point for the understanding of stereoselectivity of pulegone reductases, but also offers a basis for the engineering of menthone/menthol biosynthetic enzymes to achieve high-titer, industrial-scale production of enantiomerically pure products.

Microbial production of advanced biofuels

Concerns over climate change have necessitated a rethinking of our transportation infrastructure. One possible alternative to carbon-polluting fossil fuels is biofuels produced by engineered microorganisms that use a renewable carbon source. Two biofuels, ethanol and biodiesel, have made inroads in displacing petroleum-based fuels, but their uptake has been limited by the amounts that can be used in conventional engines and by their cost. Advanced biofuels that mimic petroleum-based fuels are not limited by the amounts that can be used in existing transportation infrastructure but have had limited uptake due to costs. In this Review, we discuss engineering metabolic pathways to produce advanced biofuels, challenges with substrate and product toxicity with regard to host microorganisms and methods to engineer tolerance, and the use of functional genomics and machine learning approaches to produce advanced biofuels and prospects for reducing their costs.

Metabolic Perturbation and Synthetic Biology Strategies for Plant Terpenoid Production-An Updated Overview

Terpenoids represent one of the high-value groups of specialized metabolites with vast structural diversity. They exhibit versatile human benefits and have been successfully exploited in several sectors of day-to-day life applications, including cosmetics, foods, and pharmaceuticals. Historically, the potential use of terpenoids is challenging, and highly hampered by their bioavailability in their natural sources. Significant progress has been made in recent years to overcome such challenges by advancing the heterologous production platforms of hosts and metabolic engineering technologies. Herein, we summarize the latest developments associated with analytical platforms, metabolic engineering, and synthetic biology, with a focus on two terpenoid classes: monoterpenoids and sesquiterpenoids. Accumulated data showed that subcellular localization of both the precursor pool and the introduced enzymes were the crucial factors for increasing the production of targeted terpenoids in plants. We believe this timely review provides a glimpse of current state-of-the-art techniques/methodologies related to terpenoid engineering that would facilitate further improvements in terpenoids research.

Monoterpenoid biosynthesis by engineered microbes

Monoterpenoids are C10 isoprenoids and constitute a large family of natural products. They have been used as ingredients in food, cosmetics and therapeutic products. Many monoterpenoids such as linalool, geraniol, limonene and pinene are volatile and can be found in plant essential oils. Conventionally, these bioactive compounds are obtained from plant extracts by using organic solvents or by distillation method, which are costly and laborious if high purity product is desired. In recent years, microbial biosynthesis has emerged as alternative source of monoterpenoids with great promise for meeting the increasing global demand for these compounds. However, current methods of production are not yet at levels required for commercialization. Production efficiency of monoterpenoids in microbial hosts is often restricted by high volatility of the monoterpenoids, a lack of enzymatic activity and selectivity, and/or product cytotoxicity to the microbial hosts. In this review, we summarize advances in microbial production of monoterpenoids over the past three years with particular focus on the key metabolic engineering strategies for different monoterpenoid products. We also provide our perspective on the promise of future endeavors to improve monoterpenoid productivity.

The beauty of biocatalysis: sustainable synthesis of ingredients in cosmetics

Covering: 2015 up to July 2021The market for cosmetics is consumer driven and the desire for green, sustainable and natural ingredients is increasing. The use of isolated enzymes and whole-cell organisms to synthesise these products is congruent with these values, especially when combined with the use of renewable, recyclable or waste feedstocks. The literature of biocatalysis for the synthesis of ingredients in cosmetics in the past five years is herein reviewed.

Efficient Syntheses of Biobased Terephthalic Acid, p-Toluic Acid, and p-Methylacetophenone via One-Pot Catalytic Aerobic Oxidation of Monoterpene Derived Bio-p-cymene

An efficient elevated-pressure catalytic oxidative process (2.5 mol % Co(NO₃)₂, 2.5 mol % MnBr₂, air (30 bar), 125 °C, acetic acid, 6 h) has been developed to oxidize p-cymene into crystalline white terephthalic acid (TA) in ∼70% yield. Use of this mixed Co²⁺/Mn²⁺ catalytic system is key to obtaining high 70% yields of TA at relatively low reaction temperatures (125 °C) in short reaction times (6 h), which is likely to be due to the synergistic action of bromine and nitrate radicals in the oxidative process. Recycling studies have demonstrated that the mixed metal catalysts present in recovered mother liquors could be recycled three times in successive p-cymene oxidation reactions with no loss in catalytic activity or TA yield. Partial oxidation of p-cymene to give p-methylacetophenone (p-MA) in 55-60% yield can be achieved using a mixed CoBr₂/Mn(OAc)₂ catalytic system under 1 atm air for 24 h, while use of Co(NO₃)₂/MnBr₂ under 1 atm O₂ for 24 h gave p-toluic acid in 55-60% yield. Therefore, access to these simple catalytic aerobic conditions enables multiple biorenewable bulk terpene feedstocks (e.g., crude sulfate turpentine, turpentine, cineole, and limonene) to be converted into synthetically useful bio-p-MA, bio-p-toluic acid, and bio-TA (and hence bio-polyethylene terephthalate) as part of a terpene based biorefinery.

Further engineering of R. toruloides for the production of terpenes from lignocellulosic biomass

BACKGROUND

Mitigation of climate change requires that new routes for the production of fuels and chemicals be as oil-independent as possible. The microbial conversion of lignocellulosic feedstocks into terpene-based biofuels and bioproducts represents one such route. This work builds upon previous demonstrations that the single-celled carotenogenic basidiomycete, Rhodosporidium toruloides, is a promising host for the production of terpenes from lignocellulosic hydrolysates.

RESULTS

This study focuses on the optimization of production of the monoterpene 1,8-cineole and the sesquiterpene α-bisabolene in R. toruloides. The α-bisabolene titer attained in R. toruloides was found to be proportional to the copy number of the bisabolene synthase (BIS) expression cassette, which in turn influenced the expression level of several native mevalonate pathway genes. The addition of more copies of BIS under a stronger promoter resulted in production of α-bisabolene at 2.2 g/L from lignocellulosic hydrolysate in a 2-L fermenter. Production of 1,8-cineole was found to be limited by availability of the precursor geranylgeranyl pyrophosphate (GPP) and expression of an appropriate GPP synthase increased the monoterpene titer fourfold to 143 mg/L at bench scale. Targeted mevalonate pathway metabolite analysis suggested that 3-hydroxy-3-methyl-glutaryl-coenzyme A reductase (HMGR), mevalonate kinase (MK) and phosphomevalonate kinase (PMK) may be pathway bottlenecks are were therefore selected as targets for overexpression. Expression of HMGR, MK, and PMK orthologs and growth in an optimized lignocellulosic hydrolysate medium increased the 1,8-cineole titer an additional tenfold to 1.4 g/L. Expression of the same mevalonate pathway genes did not have as large an impact on α-bisabolene production, although the final titer was higher at 2.6 g/L. Furthermore, mevalonate pathway intermediates accumulated in the mevalonate-engineered strains, suggesting room for further improvement.

CONCLUSIONS

This work brings R. toruloides closer to being able to make industrially relevant quantities of terpene from lignocellulosic biomass.

Bornyl Diphosphate Synthase From Cinnamomum burmanni and Its Application for (+)-Borneol Biosynthesis in Yeast

(+)-Borneol is a desirable monoterpenoid with effective anti-inflammatory and analgesic effects that is known as soft gold. (+)-bornyl diphosphate synthase is the key enzyme in the (+)-borneol biosynthesis pathway. Despite several reported (+)-bornyl diphosphate synthase genes, relatively low (+)-borneol production hinders the attempts to synthesize it using microbial fermentation. Here, we identified the highly specific (+)-bornyl diphosphate synthase CbTPS1 from Cinnamomum burmanni. An in vitro assay showed that (+)-borneol was the main product of CbTPS1 (88.70% of the total products), and the K _m value was 5.11 ± 1.70 μM with a k _cat value of 0.01 s^-1. Further, we reconstituted the (+)-borneol biosynthetic pathway in Saccharomyces cerevisiae. After tailored truncation and adding Kozak sequences, the (+)-borneol yield was improved by 96.33-fold to 2.89 mg⋅L^-1 compared with the initial strain in shake flasks. This work is the first reported attempt to produce (+)-borneol by microbial fermentation. It lays a foundation for further pathway reconstruction and metabolic engineering production of this valuable natural monoterpenoid.

Combinatorial Modulation of Linalool Synthase and Farnesyl Diphosphate Synthase for Linalool Overproduction in Saccharomyces cerevisiae

Linalool, as a fragrant monoterpene, is an important feedstock for food, pharmaceuticals, and cosmetics industries. Although our previous study had significantly increased linalool production by the directed evolution of linalool synthase and overexpression of the whole mevalonate pathway genes, the engineered yeast strain suffered from dramatically reduced biomass. Herein, a stress-free linalool-producing yeast cell factory was constructed by the combinational regulation of linalool synthase and farnesyl diphosphate synthase instead of multienzyme overexpression. First, the expression level of linalool synthase was successfully enhanced by introducing a N-terminal SKIK tag, which improved linalool production by 3.3-fold. Subsequently, the modular assembly of linalool synthase and dominant negative farnesyl diphosphate synthase via short peptide tags efficiently converted geranyl pyrophosphate to linalool. Additional downregulation of the native farnesyl diphosphate synthase led to the highest reported linalool production (80.9 mg/L) in yeast. This combinatorial modulation strategy may also be applied to the production of other high-value monoterpenes.

Molecular cloning and functional identification of a high-efficiency (+)-borneol dehydrogenase from Cinnamomum camphora (L.) Presl

Cinnamomum camphora (L.) Presl, rich in terpenoids, is an important commercial plant. The monoterpenes borneol and camphor are highly desired compounds that have been widely and diversely used in medicine and spices since ancient times. However, the key enzymes in the biosynthetic pathway of borneol and camphor in C. camphora remains unknown, which limits access to these natural products. Here, the chirality of borneol and camphor were identified in C. camphora leaves. Besides the main (+)-borneol and (+)-camphor, C. camphora also contains small amounts of (-)-borneol and (-)-camphor. Then, CcBDH3 - an efficient (+)-borneol dehydrogenase (BDH) - was identified that catalyzed (+)-borneol into (+)-camphor in the presence of NAD⁺. The K_m value was 25.1 μM with a k_cat value of 5.4 × 10^-3 s^-1 at pH 8.5 and 30 °C. CcBDH3, which also yields (-)-camphor from (-)-borneol as a substrate, had a K_m value of 36.9 μM with a k_cat of 2.1 × 10^-3 s^-1, and pH of 8.0 and temperature of 32 °C. We further compared the conformational specificity of two other reported BDHs, ZSD1 and ADH2, and found that ZSD1 had the highest conversion rate with (-)-borneol. These findings provide a new way for the production of camphor with various optical activities by metabolic engineering, and the identified camphor biosynthesis pathway provides the foundation for using genetic engineering to improve the production and purity of (+)-borneol in planta.

Recent Advances on Feasible Strategies for Monoterpenoid Production in Saccharomyces cerevisiae

Terpenoids are a large diverse group of natural products which play important roles in plant metabolic activities. Monoterpenoids are the main components of plant essential oils and the active components of some traditional Chinese medicinal herbs. Some monoterpenoids are widely used in medicine, cosmetics and other industries, and they are mainly obtained by plant biomass extraction methods. These plant extraction methods have some problems, such as low efficiency, unstable quality, and high cost. Moreover, the monoterpenoid production from plant cannot satisfy the growing monoterpenoids demand. The development of metabolic engineering, protein engineering and synthetic biology provides an opportunity to produce large amounts of monoterpenoids eco-friendly using microbial cell factories. This mini-review covers current monoterpenoids production using Saccharomyces cerevisiae. The monoterpenoids biosynthetic pathways, engineering of key monoterpenoids biosynthetic enzymes, and current monoterpenoids production using S. cerevisiae were summarized. In the future, metabolically engineered S. cerevisiae may provide one possible green and sustainable strategy for monoterpenoids supply.

Exploiting Single Domain Antibodies as Regulatory Parts to Modulate Monoterpenoid Production in E. coli

Synthetic biology and metabolic engineering offer potentially green and attractive routes to the production of high value compounds. The provision of high-quality parts and pathways is crucial in enabling the biosynthesis of chemicals using synthetic biology. While a number of regulatory parts that provide control at the transcriptional and translational level have been developed, relatively few exist at the protein level. Single domain antibodies (sdAb) such as camelid heavy chain variable fragments (V_HH) possess binding characteristics which could be exploited for their development and use as novel parts for regulating metabolic pathways at the protein level in microbial cell factories. Here, a platform for the use of V_HH as tools in Escherichia coli is developed and subsequently used to modulate linalool production in E. coli. The coproduction of a Design of Experiments (DoE) optimized pBbE8k His₆-V_HHCyDisCo system alongside a heterologous linalool production pathway facilitated the identification of anti-bLinS V_HH that functioned as modulators of bLinS. This resulted in altered product profiles and significant variation in the titers of linalool, geraniol, nerolidol, and indole obtained. The ability to alter the production levels of high value terpenoids, such as linalool, in a tunable manner at the protein level could represent a significant step forward for the development of improved microbial cell factories. This study serves as a proof of principle indicating that V_HH can be used to modulate enzyme activity in engineered pathways within E. coli. Given their almost limitless binding potential, we posit that single domain antibodies could emerge as powerful regulatory parts in synthetic biology applications.

Production of the Fragrance Geraniol in Peroxisomes of a Product-Tolerant Baker's Yeast

Monoterpenoids, such as the plant metabolite geraniol, are of high industrial relevance since they are important fragrance materials for perfumes, cosmetics, and household products. Chemical synthesis or extraction from plant material for industry purposes are complex, environmentally harmful or expensive and depend on seasonal variations. Heterologous microbial production offers a cost-efficient and sustainable alternative but suffers from low metabolic flux of the precursors and toxicity of the monoterpenoid to the cells. In this study, we evaluated two approaches to counteract both issues by compartmentalizing the biosynthetic enzymes for geraniol to the peroxisomes of Saccharomyces cerevisiae as production sites and by improving the geraniol tolerance of the yeast cells. The combination of both approaches led to an 80% increase in the geraniol titers. In the future, the inclusion of product tolerance and peroxisomal compartmentalization into the general chassis engineering toolbox for monoterpenoids or other host-damaging, industrially relevant metabolites may lead to an efficient, low-cost, and eco-friendly microbial production for industrial purposes.

Investigation of fermentation conditions of biodiesel by-products for high production of β-farnesene by an engineered Escherichia coli

Recently, the research on conversion of biodiesel by-products to high value-added products has received much attention, due to the adverse effects of large accumulations of biodiesel by-products caused by the rapid increase in biodiesel production. Herein, this study investigated the utilization of by-products crude glycerol (CG-1 and CG-2) from two different industrial methods of biodiesel production and the favorable fermentation conditions for the high yield of β-farnesene by an engineered Escherichia coli F4, which harbored an optimized mevalonate pathway. Through analyzing by-products' components and fermentation performance, we found that CG-2 did not contain harmful impurities such as methanol and black solid impurities, and the β-farnesene production was up to 2.7 g/L from CG-2, which was similar to that from pure glycerol (2.5 g/L) and higher than that (2.21 g/L) from CG-1. Therefore, CG-2 was more suitable for β-farnesene production than CG-1, which might provide a reference for choosing a more suitable method on practical biodiesel production. Afterward, a variety of important fermentation conditions were explored using CG-2 as a substrate in shaken flasks. Under the optimal conditions (including induced cell density 1.0, initial cell density 0.25, temperature after induction 33 °C, initial medium pH 6.5), the yield of β-farnesene from CG-2 reached 10.31 g/L in a 5-L bioreactor, which was 2.8-fold higher than initial conditions in shake flasks and was the highest yield of β-farnesene produced from biodiesel by-products by fermentation as well. The recommended fermentation conditions in this work will provide a valuable reference for the industrial production of β-farnesene utilizing biodiesel by-products.

Reaction Mechanism of the Isomerization of Monoterpene Epoxides with Fe3+ as Active Catalytic Specie: A Computational Approach

The reaction mechanism of the isomerization of α and β-pinene epoxides with Fe species as catalysts was studied with density functional theory (DFT) calculations and an experimental methodology. β-pinene epoxide can be isomerized into myrtanal and myrtenol in four steps, while in the case of perillyl alcohol, two additional steps are necessary. On the other hand, high selectivity to myrtanal obtained experimentally can be explained by the number of steps and the kind of the hydrogen transference that is easier for this compound in comparison with myrtenol and perillyl alcohol. A thermodynamic analysis showed that transformation into myrtenol, myrtanal, and perillyl alcohol is spontaneous but transformation into myrtanal is the most favorable. In the case of α-pinene epoxide rearrangement, a mechanistic study was carried out toward the optimization of the possible intermediates. Synthesis of campholenic aldehyde and carveol from α-pinene epoxide was carried out through three steps after the coordination of oxygen to iron, showing that in contrast to carveol formation, campholenic aldehyde synthesis is spontaneous. Analysis of ∇²ρ, the total energy density (H = V + G), and the |V|/G ratio evaluated at the bond critical point of the Fe-O bond showed for both epoxides that such interaction is closed shell instead of covalent. Apparently, α-pinene epoxide can be isomerized faster that β-pinene epoxide with Fe³⁺, which is in agreement with previous experimental results. This is the first report where a reaction mechanism of isomerization of monoterpenes epoxides is studied based on very detailed experimental and computational methodologies.

Techno-economic assessment of microbial limonene production

To satisfy the growing demand for limonene, novel pathways for microbial production of limonene have been sought. A techno-economic analysis is carried out for one such process producing limonene from sugar at an industrial plant scale to assess potential economic viability. A conceptual design of the process is developed, in which a gas stripping-solvent scrubbing method is chosen for recovering limonene from bioreactors based on consideration of payback time and process operability. Minimum limonene selling prices are estimated over a range of fermentation productivity based on the calculation of net present value using discounted cash flow method. Under 45% of the maximum theoretical yield, the selling price reaches $19.9/kg, which could be competitive with established production processes when fermentation productivity is above 0.7 kg/(m3·h). Reduction of cost could be realised through improvement of microbial strains, utilisation of cheaper feedstocks, reduction in capital investment and strategic business planning.

Alpha-Terpineol production from an engineered Saccharomyces cerevisiae cell factory

Background

Alpha-Terpineol (α-Terpineol), a C₁₀ monoterpenoid alcohol, is widely used in the cosmetic and pharmaceutical industries. Construction Saccharomyces cerevisiae cell factories for producing monoterpenes offers a promising means to substitute chemical synthesis or phytoextraction.

Results

α-Terpineol was produced by expressing the truncated α-Terpineol synthase (tVvTS) from Vitis vinifera in S. cerevisiae. The α-Terpineol titer was increased to 0.83 mg/L with overexpression of the rate-limiting genes tHMG1, IDI1 and ERG20^F96W-N127W. A GSGSGSGSGS linker was applied to fuse ERG20^F96W-N127W with tVvTS, and expressing the fusion protein increased the α-Terpineol production by 2.87-fold to 2.39 mg/L when compared with the parental strain. In addition, we found that farnesyl diphosphate (FPP) accumulation by down-regulation of ERG9 expression and deletion of LPP1 and DPP1 did not improve α-Terpineol production. Therefore, ERG9 was overexpressed and the α-Terpineol titer was further increased to 3.32 mg/L. The best α-Terpineol producing strain LCB08 was then used for batch and fed-batch fermentation in a 5 L bioreactor, and the production of α-Terpineol was ultimately improved to 21.88 mg/L.

Conclusions

An efficient α-Terpineol production cell factory was constructed by engineering the S. cerevisiae mevalonate pathway, and the metabolic engineering strategies could also be applied to produce other valuable monoterpene compounds in yeast.

Orthogonal monoterpenoid biosynthesis in yeast constructed on an isomeric substrate

Synthetic biology efforts for the production of valuable chemicals are frequently hindered by the structure and regulation of the native metabolic pathways of the chassis. This is particularly evident in the case of monoterpenoid production in Saccharomyces cerevisiae, where the canonical terpene precursor geranyl diphosphate is tightly coupled to the biosynthesis of isoprenoid compounds essential for yeast viability. Here, we establish a synthetic orthogonal monoterpenoid pathway based on an alternative precursor, neryl diphosphate. We identify structural determinants of isomeric substrate selectivity in monoterpene synthases and engineer five different enzymes to accept the alternative substrate with improved efficiency and specificity. We combine the engineered enzymes with dynamic regulation of metabolic flux to harness the potential of the orthogonal substrate and improve the production of industrially-relevant monoterpenes by several-fold compared to the canonical pathway. This approach highlights the introduction of synthetic metabolism as an effective strategy for high-value compound production.

Identifying and engineering the ideal microbial terpenoid production host

More than 70,000 different terpenoid structures are known so far; many of them offer highly interesting applications as pharmaceuticals, flavors and fragrances, or biofuels. Extraction of these compounds from their natural sources or chemical synthesis is-in many cases-technically challenging with low or moderate yields while wasting valuable resources. Microbial production of terpenoids offers a sustainable and environment-friendly alternative starting from simple carbon sources and, frequently, safeguards high product specificity. Here, we provide an overview on employing recombinant bacteria and yeasts for heterologous de novo production of terpenoids. Currently, Escherichia coli and Saccharomyces cerevisiae are the two best-established production hosts for terpenoids. An increasing number of studies have been successful in engineering alternative microorganisms for terpenoid biosynthesis, which we intend to highlight in this review. Moreover, we discuss the specific engineering challenges as well as recent advances for microbial production of different classes of terpenoids. Rationalizing the current stages of development for different terpenoid production hosts as well as future prospects shall provide a valuable decision basis for the selection and engineering of the cell factory(ies) for industrial production of terpenoid target molecules.

Esterification of geraniol as a strategy for increasing product titre and specificity in engineered Escherichia coli

Background

Geraniol, an acyclic monoterpene alcohol, is found as a primary constituent in the essential oils of plants such as geranium, lemongrass and rose. The floral-like scent of geraniol has made it a popular constituent of flavour and fragrance products. Over recent decades biotechnology has made significant progress towards the development of industrial platforms for the production of commercially valuable monoterpenoids, such as geraniol, through expression of recombinant terpene biosynthetic pathways in microbial hosts. Titres, however, have been hindered due to the inherent toxicity of these compounds—which are often utilised for anti-microbial and anti-fungal functions in their host plant.

Results

In this study we modified an Escherichia coli strain, engineered to express a heterologous mevalonate pathway, by replacement of the terpene synthase with a geraniol synthase from Ocimum basilicum for the production of geraniol, and co-expressed an alcohol acyltransferase (AAT) from Rosa hybrida for the specific acetylation of geraniol. The low water solubility of geranyl acetate facilitated its partition into the organic phase of a two-phase system, relieving the cellular toxicity attributed to the build-up of geraniol in the aqueous phase. In a partially optimised system this strain produced 4.8 g/L geranyl acetate (based on the aqueous volume) which, on a molar equivalent basis, represents the highest monoterpene titre achieved from microbial culture to date. It was also found that esterification of geraniol prevented bioconversion into other monoterpenoids, leading to a significant improvement in product specificity, with geranyl acetate being the sole product observed.

Conclusion

In this study we have shown that it is possible to both overcome the toxicity limit impeding the production of the monoterpene alcohol geraniol and mitigate product loss in culture through endogenous metabolism by using an in vivo esterification strategy. This strategy has resulted in the highest geraniol (equivalent) titres achieved from a microbial host, and presents esterification as a viable approach to increasing the titres obtained in microbial monoterpenoid production.

Electronic supplementary material

The online version of this article (10.1186/s12934-019-1130-0) contains supplementary material, which is available to authorized users.

Discovering Monoterpene Catalysis Inside Nanocapsules with Multiscale Modeling and Experiments

Large-scale production of natural products, such as terpenes, presents a significant scientific and technological challenge. One promising approach to tackle this problem is chemical synthesis inside nanocapsules, although enzyme-like control of such chemistry has not yet been achieved. In order to better understand the complex chemistry inside nanocapsules, we design a multiscale nanoreactor simulation approach. The nanoreactor simulation protocol consists of hybrid quantum mechanics-molecular mechanics-based high temperature Langevin molecular dynamics simulations. Using this approach we model the tail-to-head formation of monoterpenes inside a resorcin[4]arene-based capsule (capsule I). We provide a rationale for the experimentally observed kinetics of monoterpene product formation and product distribution using capsule I, and we explain why additional stable monoterpenes, like camphene, are not observed. On the basis of the in-capsule I simulations, and mechanistic insights, we propose that feeding the capsule with pinene can yield camphene, and this proposal is verified experimentally. This suggests that the capsule may direct the dynamic reaction cascades by virtue of π-cation interactions.

Monoterpene production by the carotenogenic yeast Rhodosporidium toruloides

BACKGROUND

Due to their high energy density and compatible physical properties, several monoterpenes have been investigated as potential renewable transportation fuels, either as blendstocks with petroleum or as drop-in replacements for use in vehicles (both heavy and light-weight) or in aviation. Sustainable microbial production of these biofuels requires the ability to utilize cheap and readily available feedstocks such as lignocellulosic biomass, which can be depolymerized into fermentable carbon sources such as glucose and xylose. However, common microbial production platforms such as the yeast Saccharomyces cerevisiae are not naturally capable of utilizing xylose, hence requiring extensive strain engineering and optimization to efficiently utilize lignocellulosic feedstocks. In contrast, the oleaginous red yeast Rhodosporidium toruloides is capable of efficiently metabolizing both xylose and glucose, suggesting that it may be a suitable host for the production of lignocellulosic bioproducts. In addition, R. toruloides naturally produces several carotenoids (C40 terpenoids), indicating that it may have a naturally high carbon flux through its mevalonate (MVA) pathway, providing pools of intermediates for the production of a wide range of heterologous terpene-based biofuels and bioproducts from lignocellulose.

RESULTS

Sixteen terpene synthases (TS) originating from plants, bacteria and fungi were evaluated for their ability to produce a total of nine different monoterpenes in R. toruloides. Eight of these TS were functional and produced several different monoterpenes, either as individual compounds or as mixtures, with 1,8-cineole, sabinene, ocimene, pinene, limonene, and carene being produced at the highest levels. The 1,8-cineole synthase HYP3 from Hypoxylon sp. E74060B produced the highest titer of 14.94 ± 1.84 mg/L 1,8-cineole in YPD medium and was selected for further optimization and fuel properties study. Production of 1,8-cineole from lignocellulose was also demonstrated in a 2L batch fermentation, and cineole production titers reached 34.6 mg/L in DMR-EH (Deacetylated, Mechanically Refined, Enzymatically Hydorlized) hydrolysate. Finally, the fuel properties of 1,8-cineole were examined, and indicate that it may be a suitable petroleum blend stock or drop-in replacement fuel for spark ignition engines.

CONCLUSION

Our results demonstrate that Rhodosporidium toruloides is a suitable microbial platform for the production of non-native monoterpenes with biofuel applications from lignocellulosic biomass.

Bio-solar cell factories for photosynthetic isoprenoids production

Photosynthetic production of isoprenoids in cyanobacteria is considered in terms of metabolic engineering and biological importance. Metabolic engineering of photosynthetic bacteria (cyanobacteria) has been performed to construct bio-solar cell factories that convert carbon dioxide to various value-added chemicals. Isoprenoids, which are found in nature and range from essential cell components to defensive molecules, have great value in cosmetics, pharmaceutics, and biofuels. In this review, we summarize the recent engineering of cyanobacteria for photosynthetic isoprenoids production as well as carbon molar basis comparisons with heterotrophic isoprenoids production in engineered Escherichia coli.

Proteomic and metabolomic analyses provide insight into the off-flavour of fruits from citrus trees infected with 'Candidatus Liberibacter asiaticus'

Orange fruit from trees infected by 'Candidatus Liberibacter asiaticus' (CaLas) often do not look fully mature and exhibit off-flavours described as bitter, harsh, and metallic rather than juicy and fruity. Although previous studies have been carried out to understand the effect of CaLas on the flavour of orange juice using metabolomic methods, the mechanisms leading to the off-flavour that occurs in Huanglongbing (HLB)-symptomatic fruit are not well understood. In this study, fruits were collected from symptomatic and healthy Valencia sweet orange (Citrus sinensis) trees grafted on Swingle (C. paradisi X Poncirus trifoliata) rootstock. Isobaric tags for relative and absolute quantification (iTRAQ) and gas chromatography-mass spectrometry (GC-MS) were used to measure the proteins, sugars, organic acids, amino acids, and volatile terpenoids. The results showed that most of the differentially expressed proteins involved in glycolysis, the tricarboxylic acid (TCA) cycle and amino-acid biosynthesis were degraded, and terpenoid metabolism was significantly downregulated in the symptomatic fruit. Valencene, limonene, 3-carene, linalool, myrcene, and α-terpineol levels were significantly lower in fruit from CaLas-infected trees than from healthy trees. Similar phenomena were observed for sucrose and glucose. Our study indicated that off-flavour of symptomatic fruit was associated with a reduction in the levels of terpenoid products and the downregulation of proteins in glycolysis, the TCA cycle, and the terpenoid biosynthesis pathway.

Essential Oils in Stored Product Insect Pest Control

Among botanical extracts used as insecticides, essential oils (EOs) are promising alternatives to chemical insecticides. EOs are synthesized by plants, and they play a key role in plant signaling processes including also attractiveness toward pollinators and beneficial insects. Plant species producing essential oils (over 17,000 species) are called aromatic plants and are distributed worldwide. Our review aims to evaluate research studies published in the last 15 years concerning the use of EOs in stored product protection. More than 50% of the retrieved manuscripts have been published by authors from Eastern countries (Iran, China, India, and Pakistan), investigating different aspects related to insect pest management (exposure route, effect on the target pest, and mode of action). Coleoptera was the most studied insect order (85.41%) followed by Lepidoptera (11.49%), whereas few studies targeted new emerging pests (e.g., Psocoptera). Almost all the trials were carried out under laboratory conditions, while no experiments were conducted under real operating conditions. Future research studies concerning the use of EOs as insecticides should focus on the development of insecticide formulations which could be successfully applied to different production realities.

Heterologous production of levopimaric acid in Saccharomyces cerevisiae

Background

Levopimaric acid (LA), a type of diterpene resin acid produced by plants, is a significant industrial intermediate that is mainly produced via phytoextraction. This work aimed to apply synthetic biology to produce LA in yeast strains from a simple carbon source.

Results

Levopimaradiene (LP), the precursor of LA, was produced via LP synthase (LPS) expression in yeast. LPS was then modified by N-terminal truncating and site-directed mutagenesis. The strain containing t79LPS^MM (79 N-terminal amino acid truncating and M593I/Y700F mutation) produced 6.92 mg/L of LP, which were 23-fold higher than the strain containing LPS. Next, t79LPS^MM was expressed in a new metabolically engineered chassis, and the final LP production increased 164-folds to 49.21 mg/L. Three cytochrome P450 reductases (CPRs) were co-expressed with CYP720B1 (the enzyme responsible for LA production from LP) in yeast to evaluate their LA producing abilities, and the CPR from Taxus cuspidata (TcCPR) was found to be the best (achieved 23.13 mg/L of LA production). CYP720B1 and TcCPR genes overexpression in the multi-copy site of the S.cerevisiae genome led to a 1.9-fold increase in LA production to 45.24 mg/L in a shake-flask culture. Finally, LA production was improved to 400.31 mg/L via fed-batch fermentation in a 5-L bioreactor.

Conclusions

This is the first report to produce LA in a yeast cell factory and the highest titer of LA is achieved.

Electronic supplementary material

The online version of this article (10.1186/s12934-018-0964-1) contains supplementary material, which is available to authorized users.

A living foundry for Synthetic Biological Materials: A synthetic biology roadmap to new advanced materials

Society is on the cusp of harnessing recent advances in synthetic biology to discover new bio-based products and routes to their affordable and sustainable manufacture. This is no more evident than in the discovery and manufacture of Synthetic Biological Materials, where synthetic biology has the capacity to usher in a new Materials from Biology era that will revolutionise the discovery and manufacture of innovative synthetic biological materials. These will encompass novel, smart, functionalised and hybrid materials for diverse applications whose discovery and routes to bio-production will be stimulated by the fusion of new technologies positioned across physical, digital and biological spheres. This article, which developed from an international workshop held in Manchester, United Kingdom, in 2017 [1], sets out to identify opportunities in the new materials from biology era. It considers requirements, early understanding and foresight of the challenges faced in delivering a Discovery to Manufacturing Pipeline for synthetic biological materials using synthetic biology approaches. This challenge spans the complete production cycle from intelligent and predictive design, fabrication, evaluation and production of synthetic biological materials to new ways of bringing these products to market. Pathway opportunities are identified that will help foster expertise sharing and infrastructure development to accelerate the delivery of a new generation of synthetic biological materials and the leveraging of existing investments in synthetic biology and advanced materials research to achieve this goal.

Microbial Cell Factories for the Production of Terpenoid Flavor and Fragrance Compounds

Terpenoid flavor and fragrance compounds are of high interest to the aroma industry. Microbial production offers an alternative sustainable access to the desired terpenoids independent of natural sources. Genetically engineered microorganisms can be used to synthesize terpenoids from cheap and renewable resources. Due to its modular architecture, terpenoid biosynthesis is especially well suited for the microbial cell factory concept: a platform host engineered for a high flux toward the central C₅ prenyl diphosphate precursors enables the production of a broad range of target terpenoids just by varying the pathway modules converting the C₅ intermediates to the product of interest. In this review typical terpenoid flavor and fragrance compounds marketed or under development by biotech and aroma companies are given, and the specificities of the aroma market are discussed. The main part of this work focuses on key strategies and recent advances to engineer microbes to become efficient terpenoid producers.

Synthesis and techno-economic assessment of microbial-based processes for terpenes production

BACKGROUND

Recent advances in metabolic engineering enable the production of chemicals from sugars through microbial bio-conversion. Terpenes have attracted substantial attention due to their relatively high prices and wide applications in different industries. To this end, we synthesize and assess processes for microbial production of terpenes.

RESULTS

To explain a counterintuitive experimental phenomenon where terpenes such as limonene (normal boiling point 176 °C) are often found to be 100% present in the vapor phase after bio-conversion (operating at only ~ 30 °C), we first analyze the vapor-liquid equilibrium for systems containing terpenes. Then, we propose alternative production configurations, which are further studied, using limonene as an example, in several case studies. Next, we perform economic assessment of the alternative processes and identify the major cost components. Finally, we extend the assessment to account for different process parameters, terpene products, ways to address terpene toxicity (microbial engineering vs. solvent use), and cellulosic biomass as a feedstock. We identify the key cost drivers to be (1) feed glucose concentration (wt%), (2) product yield (% of maximum theoretical yield) and (3) VVM (Volume of air per Volume of broth liquid per Minute, i.e., aeration rate in min^-1). The production of limonene, based on current experimental data, is found to be economically infeasible (production cost ~ 465 $/kg vs. market selling price ~ 7 $/kg), but higher glucose concentration and yield can lower the cost. Among 12 terpenes studied, limonene appears to be the most reasonable short-term target because of its large market size (~ 160 million $/year in the US) and the relatively easier to achieve break-even yield (~ 30%, assuming a 14 wt% feed glucose concentration and 0.1 min^-1 VVM).

CONCLUSIONS

The methods proposed in this work are applicable to a range of terpenes as well as other extracellular insoluble chemicals with density lower than that of water, such as fatty acids. The results provide guidance for future research in metabolic engineering toward terpenes production in terms of setting targets for key design parameters.

Eremophilane-type sesquiterpenes from fungi and their medicinal potential

Eremophilanes are sesquiterpenes with a rearranged carbon skeleton formed both by plants and fungi, however, almost no plant eremophilanes are found in fungi. These eremophilanes possess mainly phytotoxic, antimicrobial, anticancer and immunomodulatory properties and in this review fungal eremophilanes with bioactivities of potential medicinal applications are reviewed and discussed. A special focus is set on natural products bearing highly functionalized fatty acids at C-1 or C-3 position of the eremophilane backbone. Many of these fatty acids seem to contribute to the bioactivity of the metabolites enhancing the activity of the sesquiterpene moieties. Several approaches for optimization of these natural products for clinical needs and testing of the resulting derivatives are presented and discussed. The combination of identification of bioactive natural products with their subsequent improvement using a variety of genetical or chemical tools and the pharmacokinetic assessment of the products is presented here as a promising approach to new drugs.