Four organic crystals displaying distinctively different emission colors based on an ESIPT-active organic molecule

Heterocyclic molecules with ESIPT emission: synthetic approaches, molecular diversities, and application strategies

Excited-state intramolecular proton transfer (ESIPT) is one of the most essential emission processes in most circumstances because of its dual emission band in most cases and its high Stokes shifts. These distinguishing properties make ESIPT-based probes more suitable for a variety of applications, including analyte sensors, solid-state sensing mechanisms, optical technologies, and biomarkers for endogenous or exogenous compounds in various settings. As a result, researchers around the world are working on ESIPT emissions and developing different scaffolds for various applications or industry demands. This field of study is rapidly expanding and there is a need for an up-to-date review of synthesis methodologies and applications. This paper provides the highlights of ESIPT-based heterocyclic scaffolds, synthesis strategies, and application scenarios in the literature from 2017 to 2023.

Benzothiazole derivatives based colorimetric and fluorescent probes for detection of amine/ammonia and monitoring the decomposition of urea by urease

Amines play critical roles in chemical, agrochemical and pharmaceutical industries. However, volatile amine vapours cause widespread pollution and threaten human health. An efficient, highly sensitive and recyclable sensor for monitoring amine vapours is highly demanded. Typically, 2-(2-hydroxy-5-methyl) benzothiazole (HBT) derivates exhibit excellent aggregation-induced emission (AIE) phenomena in keto form originated from a unique excited-state intramolecular proton transfer (ESIPT) process. In this work, we have designed and synthesized two HBT-based fluorescent probes for ratiometric detection toward amine vapours and ammonia. In addition, the detection limits for ammonia were calculated as 226 ppm and 13 ppm respectively. Additionally, the test strips and electrospinning film dopped with fluorescent probes were utilized to recognize amine vapours and ammonia colorimetric with high sensitivity in solid states. According to the above characteristics, probes could monitor the biological activity of urease conveniently and rapidly.

Substituent effects on the photophysical properties of tris(salicylideneanilines)

The role of electron acceptor/donor group substitution on the photophysical properties of tris(salicylideneanilines) (TSANs) was investigated. These compounds were synthesised and characterised through spectroscopic techniques including steady state absorption and emission spectroscopies. Their photochemical reaction mechanisms and properties were explored with the aid of ab initio methods of quantum chemistry. The obtained results allow us to verify the dependence of multiple emission bands on the substitution of electron donating and accepting groups to the tris(salicylideneaniline) core. The results also stress the differences in phosphorescence behaviour of TSANs for which this type of emission has not been reported so far.

Recent advances in excited state intramolecular proton transfer mechanism-based solid state fluorescent materials and stimuli-responsive fluorescence switching

Substitutional change and controlling intra and intermolecular interactions of ESIPT molecules resulted in realizing multifunctional fluorescence properties.

Organic polymorphs based on an AEE-active tetraphenylethene salicylaldehyde Schiff-base derivative: the effect of molecular conformation on luminescence properties

An aggregation-enhanced emission (AEE)-active tetraphenylethene salicylaldehyde Schiff-base derivative, TPE-Nap, was prepared using a facile synthesis. The AEE property of TPE-Nap was studied by luminescence and absorption spectra, and was attributed to the C Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> N isomerization restriction and the excited-state intramolecular proton transfer (ESIPT) process. Polymorphs TPE-Nap-Y and TPE-Nap-O were prepared from TPE-Nap, and their emission color and intensity were compared. TPE-Nap-Y is a yellow block crystal with a very weak yellow emission, with its main peak at 565 nm, while TPE-Nap-O is an orange plate crystal that gave a stronger orange emission, with its main peak at 583 nm. Single crystal diffraction data were used to demonstrate the structure–property relationship. The most unique feature was that the torsion angle of TPE-Nap-Y between the benzene ring of the TPE unit and the Nap unit was 54.08°, while that of TPE-Nap-O was 14.19°. Interestingly, the TPE unit assumed propeller-like nonplanar conformations that likely led to different intermolecular interactions, such as C–H⋯O interactions (2.529 Å and 2.617 Å) in TPE-Nap-O and C–H⋯π interactions (3.224 Å and 3.791 Å) in TPE-Nap-Y. These were influenced by the torsion angle, although the molecules in both crystals were arranged in a similar end-to-end slip-stacking mode. These results inferred that the molecular conformation was evidently affected by luminescent properties. Crystals possessing a slightly twisted molecular conformation exhibited stronger emission than those possessing a heavily twisted molecular conformation. These investigations will expand the research on the relationship between the molecular conformation and the emission properties of organic solids, and might provide a new development strategy for organic polymorphs.

Organic polymorphs displaying different emission colors and intensities were obtained from aggregation-enhanced emission (AEE)-active tetraphenylethene derivatives, and their luminescent properties were affected mainly by molecular conformation.

A Silyl Ether Based Fluorescent Probe for Rapid Monitoring of Endogenous Peroxynitrite Concentration and Imaging in Living Cells through Multicolor Emission

The peroxynitrite ion (ONOO^- ) has important roles in many biological processes. We have developed a multicolor ONOO^- -sensing probe (SiONNOH) that undergoes deprotonation and desilylation processes, which result in several changes in the emission wavelengths. In response to different concentrations of ONOO^- , the probe exhibits fluorescence changes from pink (595 nm at 2 eq. ONOO^- ) to green (540 nm at 6 eq. ONOO^- ) via orange (3 eq. ONOO^- ) and yellow (4 eq. ONOO^- ) under physiological conditions until no fluorescence signal is observed after ONOO^- is completely eliminated by lipoic acid. The probe shows the high selectivity for ONOO^- and the limit of detection is calculated to be 1.27 μM. Moreover, the probe shows the capacity to monitor the concentration ranges of ONOO^- through multicolor fluorescence in living cells, which will greatly facilitate the rapid detection of ONOO^- concentration ranges by the naked eye under a UV light without any precision instrumentation.

Stimuli-Responsive Benzothiadiazole Derivative as a Dopant for Rewritable Polymer Blends

A new rod-shaped benzothiadiazole fluorophore, namely, 4,7-di-(4-nonylphenyl)benzo[c][1,2,5]thiadiazole, which strongly emits fluorescence both in solution and in solid state has been synthesized, and its photophysical properties were rationalized with the help of density functional theory calculations. This molecule crystallizes in two distinct light-emitting crystalline phases, which can be interconverted in response to pressure, temperature, and solvent vapors. Powder X-ray diffraction indicates that in both polymorph, molecules adopt a lamellar packing, the different interlayer spacing being the main difference between the two structures. Single-crystal analysis of one of the polymorphs allows us to identify weak interaction planes, which presumably facilitates the polymorphic transformation through mechanically or thermally induced sliding processes. The polymorphic transformation and the origin of the switchable fluorescence have been rationalized through a spectroscopic and theoretical study. This study suggests that the different colors observed are due to different intermolecular aromatic interactions owing to the displacement of the molecules with respect to the layer normal. Interestingly, blending this molecule with a biodegradable polymer such as poly(vinyl alcohol) gives rise to a thermally activated reversible switchable fluorescent system, which entitles this material as an attractive candidate for technological applications, such as thermal sensors, security inks, or rewritable paper.

A Fluorescence-Phosphorescence-Phosphorescence Triple-Channel Emission Strategy for Full-Color Luminescence

Organic luminogens constitute promising prototypes for various optoelectronic applications. Since gaining distinct color emissions normally requires the alternation of the conjugated backbone, big issues remain in material synthetic cost and skeleton compatibility while pursuing full-color luminescence. Upon a facile one-step coupling, three simple but smart perchalcogenated (O, S, and Se) arenes are synthesized. They exhibit strong luminescent tricolor primaries (i.e., blue, green, and red, respectively) in the solid state with a superior quantum yield up to >40% (5-10 times higher than that in corresponding solutions). The properties originate from a fluorescence-phosphorescence-phosphorescence triple-channel emission effect, which is regulated by S and Se heavy atoms-dependent intersystem crossing upon molecular packing, as well as Se-Se atom interaction-caused energy splittings. Consequently, full-color luminescence, including a typical white-light luminescence with a Commission Internationale de I'Eclairage coordinate of (0.30, 0.35), is realized by complementarily incorporating these tricolor luminescent materials in the film. Moreover, mechanochromic luminescent color conversions are also observed to achieve the fine-tuning of the luminescent tints. This strategy can be smart to address full-color luminescence on the same molecular skeleton, showing better material compatibility as an alternative to the traditional multiple-luminophore engineering.

Red-Emissive Organic Crystals of a Single-Benzene Molecule: Elastically Bendable and Flexible Optical Waveguide

Organic crystals are easily cracked into pieces or powders under applied stress because of their intrinsic brittle nature. This undesired mechanical property directly limits their application in flexible optical and optoelectronic devices. Herein, we developed a compact single-benzene molecule dimethyl 2,5-bis((2-hydroxyethyl)amino)terephthalate, which was easily crystallized to form two polymorphs, A and B. Featuring a single-benzene π-system, both polymorphs A and B display red fluorescence in crystals. More importantly, crystals of polymorph A are flexible and can be elastically bent under mechanical force. Given these advantages, a flexible optical waveguide has been realized in the crystal of polymorph A with a bent shape, highlighting its potential application in flexible devices. In addition, the thermal transformation of crystals from polymorph A to polymorph B, which was accompanied by the change of optical property as well as mechanical elasticity, has been observed.