Efficient activation of peroxymonosulfate by hollow cobalt hydroxide for degradation of ibuprofen and theoretical study

Peroxysulfur species-mediated enhanced oxidation of micropollutants by ferrate(VI): Peroxymonosulfate versus peroxydisulfate

Many studies have shown that Peroxymonosulfate (PMS) works synergistically with ferrate (Fe(VI)) to remove refractory organic compounds in a few minutes. However, little has been reported on the combined effects of peroxydisulfate (PDS) and Fe(VI). Since PDS is stable and cost effective, it is of practical significance to study the reaction mechanism and conditions of the PDS/Fe(VI) system. The results of the study indicate that the intermediate Fe(II) is formed during the decomposition of Fe(VI), which is then rapidly oxidized. Due to the asymmetry of the PMS molecular structure, PMS can rapidly trap Fe(II) (kPMS/Fe(II)= 3 × 104 M-1∙s-1), whereas PDS cannot (kPDS/Fe(II)= 26 M-1∙s-1). Hydroxylamine hydrochloride (HA) can reduce Fe(VI) and Fe(III) to Fe(II) to excite PDS to produce SO4•-. Acetate helps to detect Fe(II), but does not help PDS to trap Fe(II). Active species such as SO4•-, •OH, 1O2, and Fe(IV), Fe(V) are present in both systems, but in different amounts. In the PMS/Fe(Ⅵ) system, all these active species react with ibuprofen (IBP) and degrade IBP within several minutes. The effects of the initial pH, PMS or Fe(VI) dosage, and different amounts of IBP on the removal rate of IBP were investigated. According to the intermediates detected by the GC-MS, the degradation process of IBP includes hydroxylation, demethylation and single bond breakage. The degradation pathways of IBP were proposed. The degradation of IBP in tap water and Songhua River was also investigated. In actual water treatment, the dosage needs to be increased to achieve the same results. This study provides a basis and theoretical support for the application of PMS/Fe(Ⅵ) and PDS/Fe(VI) system in water treatment.

Insight into the generation of toxic by-products during UV/H2O2 degradation of carbamazepine: Mechanisms, N-transformation and toxicity

Carbamazepine (CBZ) is a widely used anticonvulsant drug that has been detected in aquatic environments. This study investigated the toxicity of its by-products (CBZ-BPs), which may surpass CBZ. Unlike the previous studies, this study offered a more systematic approach to identifying toxic BPs and inferring degradation pathways. Furthermore, quadrupole time-of-flight (QTOF) and density functional theory (DFT) calculations were employed to analyze CBZ-BP structures and degradation pathways. Evaluation of total organic carbon (TOC) and total nitrogen (TN) mineralization rates, revealed carbon (C) greater susceptibility to mineralization compared with nitrogen (N). Furthermore, three rules were established for CBZ decarbonization and N removal during degradation, observing the transformation of aromatic compounds into aliphatic hydrocarbons and stable N-containing organic matter over time. Five potentially highly toxic BPs were screened from 14 identified BPs, with toxicity predictions guiding the selection of commercial standards for quantification and true toxicity testing. Additionally, BP207 emerged as the most toxic, supported by the predictive toxicity accumulation model (PTAM). Notably, highly toxic BPs feature an acridine structure, indicating its significant contribution to toxicity. These findings offered valuable insights into the degradation mechanisms of emerging contaminants and the biosafety of aquatic environments during deep oxidation.

Unveiling the oxidation mechanism of persistent organic contaminants via visible light-induced dye-sensitized reaction by red mud suspension with peroxymonosulfate

A dye-sensitized photocatalysis system was developed for degrading persistent organic contaminants using solid waste (i.e., red mud, RM) and peroxymonosulfate (PMS) under visible light. Complete degradation of acid orange 7 (AO7) was achieved in RM suspension with PMS, where the co-existence of amorphous FeO(OH)/α-Fe2O3 was the key factor for PMS activation. The experimental results obtained from photochemical and electrochemical observations confirmed the enhanced PMS activation due to the Fe-OH phase in RM. DFT calculations verified the acceleration of PMS activation due to the high adsorption energy of PMS on FeO(OH) and low energy barrier for generating reactive radicals. Compared to the control experiment without AO7 showing almost no degradation of other organic contaminants (phenol, bisphenol A, 4-chlorophenol, 4-nitrophenol, and benzoic acid), photo-sensitized AO7* enhanced electron transfer in the FeIII/FeII cycle, dramatically enhancing the degradation of organic contaminants via radical (•OH, SO4•-, and O2•-) and non-radical (dye*+ and 1O2) pathways. Therefore, the novel finding of this study can provide new insights for unique PMS activation by heterogeneous Fe(III) containing solid wastes and highlight the importance of sensitized dye on the interaction of PMS with Fe charge carrier for the photo-oxidation of organic contaminants under visible light.

Highly effective degradation of ibuprofen by alkaline metal-doped copper oxides via peroxymonosulfate activation: Mechanisms, degradation pathway and toxicity assessments

Redox ratios of Cu2+/Cu+ and adsorbed oxygen species (Oads) have shown great activity toward radical generation by activating peroxymonosulfate (PMS). Herein, different alkaline metal oxides (CaO, MgO and BaO) and various amounts of CaO are incorporated into CuO, which could tune the main active sites of redox ratios of Cu2+/Cu+ and Oads. The results show that CaO-CuO-5% exhibits the outstanding performance of PMS activation toward ibuprofen (IBF) degradation with excellent kinetics (k = 0.812 min-1). The X-ray absorption spectroscopy (XAS) and density functional theory (DFT) calculation show that the CaO-CuO-5% has the higher electron density with superior electron transfer ability and lower PMS adsorption energy. Based on radical scavengers and electron paramagnetic resonance spectrometer (EPR), a nonradical process is proposed to play the dominant role. The degradation pathway and the corresponding toxicity of degraded intermediates with residue PMS after reaction is evaluated by LC-MS/MS and bioassay experiments, indicating the lower antagonistic influence on human hormone receptors after advanced oxidation process. Mitigation of the Cu leaching with cyclic stability can be achieved. This study provides a facile method to optimize high-performance catalysts to activate PMS and offer practical environmental applications in the remediation of emerging contaminants.

High yielded Co-C derived from polyester-Cobalt carbothermal reduction for efficient activation of peroxymonosulfate to degrade levofloxacin

A kind of high yield and recyclable Cobalt-Carbon composite (Zn₁Co₅/P_nC) was prepared by carbothermal reduction process, in which the cobalt acetate and zinc acetate were considered as Zn and Co precursors, and the polyester waste was evolved as the carbon precursor. The morphology, structure and composition of the composite were characterized using scanning electron microscopy, X-ray diffraction and X-ray photoelectron spectroscopy. Results showed that evaporation of zinc contributed to the formation of porous carbon structure, and the Co nanoparticles were wrapped and protected by the porous carbon matrix. The Zn₁Co₅/P_nC activated peroxymonosulfate (PMS) system (Zn₁Co₅/P_nC/PMS) was constructed to degrade the levofloxacin (LEV). The activity and mechanism of LEV degradation was understood. The LEV degradation efficiency was high to 96.60% within 90 min in the presence of Zn₁Co₅/P₄C. Moreover, the Zn₁Co₅/P₄C still maintained favorable PMS activation performance after five-cycle runs. The results show that the Zn₁Co₅/P₄C played positive role in activating the PMS, it may be due to the facts that the polyester derived carbon could supported the Co while the evaporated Zn could increase the surface area of Zn₁Co₅/P₄C, leading to the increased activity. The possible degradation pathways were proposed by identifying the intermediate products through liquid chromatography-mass spectrometry analysis. This study put forward a promising method to use polyester waste to synthesize high yield cobalt-carbon composite for degrading the antibiotic in wastewater.

Light and nitrogen vacancy-intensified nonradical oxidation of organic contaminant with Mn (III) doped carbon nitride in peroxymonosulfate activation

Recently, Mn-based materials have a great potential for selective removal of organic contaminants with the assistance of oxidants (PMS, H₂O₂) and the direct oxidation. However, the rapid oxidation of organic pollutants by Mn-based materials in PMS activation still presents a challenge due to the lower conversion of surface Mn (III)/Mn (IV) and higher reactive energy barrier for reactive intermediates. Here, we constructed Mn (III) and nitrogen vacancies (Nv) modified graphite carbon nitride (MNCN) to break these aforementioned limitations. Through analysis of in-situ spectra and various experiments, a novel mechanism of light-assistance non-radical reaction is clearly elucidated in MNCN/PMS-Light system. Adequate results indicate that Mn (III) only provide a few electrons to decompose Mn (III)-PMS* complex under light irradiation. Thus, the lacking electrons necessarily are supplied from BPA, resulting in its greater removal, then the decomposition of the Mn (III)-PMS* complex and light synergism form the surface Mn (IV) species. Above Mn-PMS complex and surface Mn (IV) species lead to the BPA oxidation in MNCN/PMS-Light system without the involvement of sulfate (SO₄^{• ̶}) and hydroxyl radicals (•OH). The study provides a new understanding for accelerating non-radical reaction in light/PMS system for the selective removal of contaminant.

Density Functional Theory and Machine Learning-Based Quantitative Structure-Activity Relationship Models Enabling Prediction of Contaminant Degradation Performance with Heterogeneous Peroxymonosulfate Treatments

Heterogeneous peroxymonosulfate (PMS) treatment is recognized as an effective advanced oxidation process (AOP) for the treatment of organic contaminants. Quantitative structure-activity relationship (QSAR) models have been applied to predict the oxidation reaction rates of contaminants in homogeneous PMS treatment systems but are seldom applied in heterogeneous treatment systems. Herein, we established QSAR models updated with density functional theory (DFT) and machine learning approaches to predict the degradation performance for a series of contaminants in heterogeneous PMS systems. We imported the characteristics of organic molecules calculated using constrained DFT as input descriptors and predicted the apparent degradation rate constants of contaminants as the output. The genetic algorithm and deep neural networks were used to improve the predictive accuracy. The qualitative and quantitative results from the QSAR model for the degradation of contaminants can be used to select the most appropriate treatment system. A strategy for selection of the optimum catalyst for PMS treatment of specific contaminants was also established according to the QSAR models. This work not only increases our understanding of contaminant degradation in PMS treatment systems but also highlights a novel QSAR model to predict the degradation performance in complicated heterogeneous AOPs.

Removal of Bisphenol A via peroxymonosulfate activation over graphite carbon nitride supported NiCx nanoclusters catalyst: Synergistic oxidation of high-valent nickel-oxo species and singlet oxygen

In this work, a g-C₃N₄ supported NiCx nanoclusters catalyst (NiCx-CN) was developed, and its performance in activating peroxymonosulfate (PMS) was evaluated. Mechanism investigation stated that although singlet oxygen (¹O₂) was formed in the catalytic process, its contribution to BPA elimination was weeny. Interestingly, through the experiment with dimethyl sulfoxide as the probe, it was considered that the high-valent nickel-oxo species (Ni^&+=O), generated after the interaction of NiCx-CN and PMS, was the dominating reactive oxygen species (ROS). Theoretical calculations (DFT) implied that NiCx-CN might lose electrons to generate high-valent Ni, which was consistent with the detection of Ni³⁺ on the surface of the used NiCx-CN. Besides, the prepared NiCx-CN showed advantages in resisting the interference of inorganic anions. Meanwhile, three BPA degradation routes had been proposed based on the transformation intermediates. This study will establish a new protocol for PMS activation using heterogeneous Ni-based catalysts to efficiently degrade organic pollutants via a nonradical mechanism.

Biochar loaded with cobalt ferrate activated persulfate to degrade naphthalene

Considering the simple preparation of biochar and the excellent activation performance of cobalt ferrate material, a biochar supported cobalt ferrate composite was synthesized by a solvothermal method. The material was used to activate persulfate (PS) to degrade naphthalene (NAP) in water. The structure and morphology characterization showed that the composite (CoFe₂O₄-BC) was successfully prepared. Under the conditions of 0.25 g L^-1 CoFe₂O₄-BC and 1 mM PS, 90.6% NAP (the initial concentration was 0.1 mM) was degraded after 30 minutes. The degradation kinetics of NAP followed the pseudo-first-order kinetic model with a rate constant of 0.0645 min^-1. With the increase of the dosage of activator and PS, the removal rate of NAP could be increased to 99.5%. The coexistence of anions and humic acids inhibited the removal of NAP. The acid environment promoted the removal of NAP while the alkaline environment inhibited it. After four cycles of CoFe₂O₄-BC material, the removal rate of NAP decreased from 90.6% to 79.4%. The removal of TOC was about 45% after each cycle. After the first cycle, the concentration of leached cobalt ion and leached iron ion was about 310 μg L^-1 and 30 μg L^-1 respectively. The free radical quenching experiments showed that SO₄ ^-˙ and OH˙ were the main causes of NAP removal, and the possible degradation path of NAP was elucidated by DFT calculation.

Activation of peroxymonosulfate for degrading ibuprofen via single atom Cu anchored by carbon skeleton and chlorine atom: The radical and non-radical pathways

Single atomic Cu catalysts (SACs Cu@C) anchored by carbon skeleton and chlorine atom was synthesized by hydrolyzing Cu-MOFs and then pickled by aqua-regia to remove Cu nanoparticles (NPs Cu). Comparative characterizations revealed that SACs Cu@C was a hierarchically porous nanostructure and Cu dispersed uniformly throughout the carbon skeletons. With less active components, SACs Cu@C behaved better in activating PMS over NPs Cu@C on ibuprofen removal (91.3 % versus 30.2 % in 30 min). Two Cu coordination environments were found by EXAF and DFT calculation, including four-coordinated Cu with 4C atoms and six-coordinated Cu with 4Cu and 2Cl atoms. The obvious interfacial electron delivery between PMS and SACs Cu@C was found, which was enhanced by Cl atom. Cu(I)/Cu(II) redox cycle would donate electron to peroxy bond of PMS for generating OH, SO₄^- and O₂^-. But electron transferred in opposite direction when PMS bonded to Cu atom through its terminal oxygen atom in sulfate, which formed ¹O₂. IBP degradation proceeded through both radical and non-radical route. IBP degradation was inhibited with the presence of TBA, methanol and furfuryl alcohol but accelerated by p-BQ, which could accelerate OH generation. Two degradation pathways were deducted. This study provided a new insight into catalysts designed for PMS activation.

Electro-activating of peroxymonosulfate via boron and sulfur co-doped macroporous carbon nanofibers cathode for high-efficient degradation of levofloxacin

To address the difficulty of precisely regulating the two-electron oxygen reduction reaction (2e-ORR) and investigate the synergistic effect of hydrogen peroxide (H₂O₂) and peroxymonosulfate (PMS), a heterogeneous electro-catalyst was synthesized via carbonation of boron (B) and sulfur (S) co-doping electrospun nanofibers containing iron and cobalt (B, S-Fe/Co@C-NCNFs-900), and used to degrade levofloxacin (Levo) in the electro-activating PMS with self-made cathode material (E-cathode-PMS) system. The morphological, structural, and electrochemical characteristics have been investigated. The results showed that B and S co-doping could remarkably enhance electron transfer and manage two-electron oxygen reduction, which was more favorable for H₂O₂ generation. Levo degradation efficiency could reach 99.63% with a reaction rate of 0.3056 min^-1 in 20 min under the appropriate conditions (pH = 4, current = 20 mA, and [PMS] = 8.0 mM). The steady-state concentration of singlet oxygen (¹O₂) was calculated to be 669.17 × 10^-14 M, which was 15.42, 29.74, and 45.00 times respectively than that of HO₂·/O₂·^- (43.40 × 10^-14 M), ·OH (22.25 × 10^-14 M) and SO₄^-·(14.87 × 10^-14 M), signifying that ¹O₂ was the predominant reactive oxygen species (ROS) involved in Levo removal. The high TOC removal (74.19%), low energy consumption (0.14 kWh m^-3 order^-1), few intermediates toxicity, and excellent Levo degradation efficiency for complex wastewater with various anions and matrixes showed the prospective practical applications of the E-cathode-PMS system. Overall, this study provides a useful strategy to regulate and control the 2e-ORR pathway.

Treatment of Water Contaminated with Non-Steroidal Anti-Inflammatory Drugs Using Peroxymonosulfate Activated by Calcined Melamine@magnetite Nanoparticles Encapsulated into a Polymeric Matrix

In the present study, calcined melamine (CM) and magnetite nanoparticles (MNPs) were encapsulated in a calcium alginate (CA) matrix to effectively activate peroxymonosulfate (PMS) and generate free radical species for the degradation of ibuprofen (IBP) drug. According to the Langmuir isotherm model, the adsorption capacities of the as-prepared microcapsules and their components were insignificant. The CM/MNPs/CA/PMS process caused the maximum degradation of IBP (62.4%) in 30 min, with a synergy factor of 5.24. Increasing the PMS concentration from 1 to 2 mM improved the degradation efficiency from 62.4 to 68.0%, respectively, while an increase to 3 mM caused a negligible effect on the reactor effectiveness. The process performance was enhanced by ultrasound (77.6% in 30 min), UV irradiation (91.6% in 30 min), and electrochemical process (100% in 20 min). The roles of O•H and SO4•- in the decomposition of IBP by the CM/MNPs/CA/PMS process were 28.0 and 25.4%, respectively. No more than 8% reduction in the degradation efficiency of IBP was observed after four experimental runs, accompanied by negligible leachate of microcapsule components. The bio-assessment results showed a notable reduction in the bio-toxicity during the treatment process based on the specific oxygen uptake rate (SOUR).

Efficient Activation of Peroxymonosulfate by Cobalt Supported Used Resin Based Carbon Ball Catalyst for the Degradation of Ibuprofen

The extensive use of ibuprofen (IBU) and other pharmaceuticals and personal care products (PPCPs) causes them widely to exist in nature and be frequently detected in water bodies. Advanced catalytic oxidation processes (AOPs) are often used as an efficient way to degrade them, and the research on heterogeneous catalysts has become a hot spot in the field of AOPs. Among transitional metal-based catalysts, metal cobalt has been proved to be an effective element in activating peroxymonosulfate (PMS) to produce strong oxidizing components. In this study, the used D001 resin served as the matrix material and through simple impregnation and calcination, cobalt was successfully fixed on the carbon ball in the form of cobalt sulfide. When the catalyst was used to activate persulfate to degrade IBU, it was found that under certain reaction conditions, the degradation rate in one hour could exceed 70%, which was far higher than that of PMS and resin carbon balls alone. Here, we discussed the effects of catalyst loading, PMS concentration, pH value and temperature on IBU degradation. Through quenching experiments, it was found that SO4− and ·OH played a major role in the degradation process. The material has the advantages of simple preparation, low cost and convenient recovery, as well as realizing the purpose of reuse and degrading organic pollutants efficiently.

Degradation of Ibuprofen by the Electro/Fe3+/Peroxydisulfate Process: Reactive Kinetics, Degradation Products and Mechanism

Ibuprofen (IBU), a nonsteroidal anti-inflammatory drug, is one of the most widely used and frequently detected pharmaceuticals and personal care products in water bodies. This study examined the IBU degradation in aquatic solutions via ferric ion activated peroxydisulfate (PDS) coupled with electro-oxidation (EC/Fe3+/PDS). The degradation mechanisms involved three synergistic reactions in the EC/Fe3+/PDS system, including: (1) the electro-oxidation; (2) SO4•− generated from the activation of PDS by ferrous ions formed via cathodic reduction; (3) SO4•− generated from the electron transfer reaction. The radical scavenging experiments indicated that SO4•− and •OH dominated the oxidation process. The effects of the applied current density, PDS concentration, Fe3+ dosage, initial IBU concentration and initial pH as well as inorganic anions and humic acid on the degradation efficiency, were studied, and the degradation process of IBU followed the pseudo-first-order kinetic model. About 99.37% of IBU was removed in 60 min ((Fe3+ concentration) = 2.0 mM, (PDS concentration) = 12 mM, (initial IBU concentration) = 30 mg/L, current density = 15 mA/cm2, initial pH = 3). Finally, seven intermediate compounds were identified and probable IBU degradation pathways in the EC/Fe3+/PDS system were speculated.

Gravity-driven layered double hydroxide nanosheet membrane activated peroxymonosulfate system for micropollutant degradation

For the first time in this study, CoAl-layered double hydroxide nanosheet membrane (LDH_m) with abundant active sites was fabricated for peroxymonosulfate (PMS) activation with the mindset to catalytically degrade micropollutants. Depending on the catalyst loading, the developed LDH_m can be driven under gravity at a permeate flux of approximately 80 L/m² h and 210 L/m² h at LDH loading of 0.80 mg/cm² and 0.08 mg/cm², respectively. Notably, the LDH_m (0.63 mg) exhibited excellent PMS activation efficiency as indicated by 87.8% removal of the probe chemical (ranitidine) at 0.2 mM PMS, which was higher than that (37-44%) achieved by conventional LDH (5-20 mg)/PMS (0.2 mM) system. In addition to efficient degradation of several micropollutants, LDH_m/PMS performance was not inhibited by variation in solution pH (4-8) as well as during long-term (29 h) continuous-flow operation. SO₄^•- and ¹O₂ were identified as the primary reactive species in the LDH_m/PMS system, while both Co and Al participated in PMS activation. This study offers a simple strategy for efficient removal of several micropollutants with significantly reduced catalyst leaching, which could be applied sustainably in water treatment.

One-step pyrolysis for preparation of sulfur-doped biochar loaded with iron nanoparticles as an effective peroxymonosulfate activator for RhB degradation

In this study, sulfur-doped biochar loaded with iron nanoparticles (Fe/S-BC) was easily prepared by a one-pot pyrolysis method using anhydrous FeCl3, Na2S2O3·5H2O, and cherry stone powder as raw materials and...

Adding CuCo2O4-GO to inhibit bromate formation and enhance sulfamethoxazole degradation during the ozone/peroxymonosulfate process: Efficiency and mechanism

In this work, a new type of catalyst CuCo2O4-GO was synthesized as a heterogeneous catalyst, and its control effect on bromate (BrO3-)generation and sulfamethoxazole (SMX) degradation in O3/PMS process was studied. When 100 mg/L CuCo2O4-GO was added to the reaction system, the BrO3- concentration generated was 0.25 μM at pH = 7.0, 100 μM PMS addition and 1.30 mg/min ozone injection after 30 min reaction. Compared with the 6.58 μM BrO3- produced in the control group, the addition of CuCo2O4-GO prominently inhibited the generation of BrO3- and the inhibition efficiency reached 96.17 %. The addition of CuCo2O4-GO inhibited the conversion of hypobromous acid, thereby inhibiting the formation of BrO3-. Meanwhile, the first-order kinetic constant of the degradation of SMX by O3/PMS and O3/PMS/CuCo2O4-GO was 0.163 and 0.422 min-1, respectively. The addition of CuCo2O4-GO promoted the degradation of SMX and the removal efficiency was reached above 98 % after 10 min reaction. According to the optimization of the GO loading ratio, it was found that CuCo2O4-GO with 20 % GO loading had the best promotion effect on the degradation of SMX, and almost completely inhibited the formation of BrO3-. Finally, in the repeated cycle experiment, CuCo2O4-GO could maintain its high catalytic activity and still had a high removal effect on SMX after three repeated uses. Besides, the BrO3- inhibition efficiency was above 80 % after two repeated uses. Therefore, adding synthetic CuCo2O4-GO is an effective way to control the formation of BrO3- and enhance the degradation of SMX in the O3/PMS process.

Correlation of Active Sites to Generated Reactive Species and Degradation Routes of Organics in Peroxymonosulfate Activation by Co-Loaded Carbon

Peroxymonosulfate (PMS)-based advanced oxidation processes (PMS-AOPs) as an efficient strategy for organic degradation are highly dependent on catalyst design and structured active sites. However, the identification of the active sites and their relationship with reaction mechanisms for organic degradation are not fully understood for a composite catalyst due to the complex structure. Herein, we developed a family of Co encapsulated in N-doped carbons (Co-PCN) with tailored types and contents of active sites via manipulated pyrolysis for PMS activation and ciprofloxacin (CIP) degradation, focusing on the correlation of active sites to generated reactive species and degradation routes of organics. The structure-function relationships between the different active sites in Co-PCN catalysts and reactive oxygen species (ROS), as well as bond breaking position of CIP, were revealed through regression analysis and density functional theory calculation. Co-N_x, O-C═O, C═O, graphitic N, and defects in Co-PCN stimulate the generation of ¹O₂ for oxidizing the C-C bond in the piperazine ring of CIP into C═O. The substitution of F by OH and hydroxylation of the piperazine ring might be induced by SO₄^•- and ^•OH, whose formation was affected by C-O, Co(0), Co-N_x, graphitic N, and defects. The findings provided new insights into reaction mechanisms in PMS-AOP systems and rational design of catalysts for ROS-oriented degradation of pollutants.

Two-Dimensional Nanomaterials for the Removal of Pharmaceuticals from Wastewater: A Critical Review

The removal of pharmaceuticals from wastewater is critical due to their considerable risk on ecosystems and human health. Additionally, they are resistant to conventional chemical and biological remediation methods. Two-dimensional nanomaterials are a promising approach to face this challenge due to their combination of high surface areas, high electrical conductivities, and partially optical transparency. This review discusses the state-of-the-art concerning their use as adsorbents, oxidation catalysts or photocatalysts, and electrochemical catalysts for water treatment purposes. The bibliographic search bases upon academic databases including articles published until August 2021. Regarding adsorption, high removal capacities (>200 mg g−1) and short equilibrium times (<30 min) are reported for molybdenum disulfide, metal-organic frameworks, MXenes, and graphene oxide/magnetite nanocomposites, attributed to a strong adsorbate-adsorbent chemical interaction. Concerning photocatalysis, MXenes and carbon nitride heterostructures show enhanced charge carriers separation, favoring the generation of reactive oxygen species to degrade most pharmaceuticals. Peroxymonosulfate activation via pure or photo-assisted catalytic oxidation is promising to completely degrade many compounds in less than 30 min. Future work should be focused on the exploration of greener synthesis methods, regeneration, and recycling at the end-of-life of two-dimensional materials towards their successful large-scale production and application.

The degradation pathways of carbamazepine in advanced oxidation process: A mini review coupled with DFT calculation

Degradation pathway is important for the study of carbamazepine (CBZ) removal in advanced oxidation processes (AOPs). Generally, degradation pathways are speculated based on intermediate identification and basic chemical rules. However, this semiempirical strategy is sometimes time-consuming and baseless. To improve the situation, a mini meta-analysis was first conducted for the degradation pathways of CBZ in AOPs. Then, the rationality of the pathways was analyzed by Density Functional Theory (DFT) calculation. Results show that the degradation pathways of CBZ in various AOPs has high similarity, and the reactive sites predicted by Fukui function fitted well with the data retrieved from literatures. In addition, molecule configuration of degradation intermediates was found to play a very important roles on degradation pathway. The study reveals that computational chemistry is a useful tool for degradation pathway speculation in AOPs.

Oily sludge derived carbons as peroxymonosulfate activators for removing aqueous organic pollutants: Performances and the key role of carbonyl groups in electron-transfer mechanism

In this work, low-cost carbon-based materials were developed via a facile one-pot pyrolysis of oily sludge (OS) and used as catalysts to activate peroxymonosulfate (PMS) for removing aqueous recalcitrant pollutants. By adjusting the pyrolysis temperature, the optimized OS-derived carbocatalyst manifested good performance for PMS activation to abate diverse organic pollutants in water treatment. Particularly, an average removal rate of 0.87 mol phenol per mol PMS per hour at a catalyst dosage of 0.2 g L^-1 is attained by the OS-derived carbocatalyst, higher than many other documented catalysts. A series of experimental evidences consolidated that organic pollutants were oxidized mainly via electron-transfer mechanism albeit the detection of singlet oxygen (¹O₂) from PMS activation driven by the OS-derived carbocatalyst. Specifically, the proportion of carbonyl groups (C˭O) in the carbocatalyst adopted with selective modification treatments to tailor the surface chemistry was found to be linearly correlated with the catalytic activity and theoretical calculations demonstrated that the reactions between C˭O and PMS to form surface reactive complexes were more energetically favorable compared to ¹O₂ generation. Herein, this study not only offers a new strategy for reusing OS as value-added persulfate activators but also deepens the fundamental understanding on the nonradical regime.

Degradation and mineralization of the emerging pharmaceutical pollutant sildenafil by ozone and UV radiation using response surface methodology

Pharmaceuticals and their degradation products which are present in wastewater and superficial waters are becoming an ecological issue. This research investigated the degradation and mineralization of synthetic solutions of the pharmaceutical compound sildenafil citrate (SC) by single ozonation and ozonation jointed with UV radiation (O₃/UV). The effects of initial drug concentration (50-125 mg L^-1), inlet ozone concentration (35-125 g Nm^-3), and UV radiation on SC degradation and decrease of total organic carbon (TOC) were investigated using response surface methodology based on a central composite experimental design. Through the RSM analysis, it was possible to confirm the removal of SC for the entire experimental range. Major intermediates of SC degradation were identified and a degradation pathway was proposed. The kinetics of SC degradation was modeled as a pseudo-first-order reaction with a rate constant ranging between 0.072 and 1.250 min^-1. The SC degradation and TOC removal were strongly enhanced by increasing the concentration of gaseous ozone at the inlet and incorporating UV radiation. The highest TOC removal reached at 60 min was 75%, in the O₃/UV system, with initial SC content of 50 mg L^-1 and inlet ozone concentration of 125 g Nm^-3. The degradation rate of SC was increased 3 to 9 times in the presence of UV radiation. Ozone-based advanced oxidation processes appear as a suitable alternative for treatment of the emerging pollutant SC.

Using Vinegar Residue-Based Carrier Materials to Improve the Biodegradation of Phenanthrene in Aqueous Solution

A large amount of vinegar residue (VR) is generated every year in China, causing serious environmental pollutions. Meanwhile, as a kind of persistent organic pollutants, polycyclic aromatic hydrocarbons (PAHs) ubiquitously exist in environments. With a goal of reusing VR and reducing PAHs pollutions, we herein isolated one B. subtilis strain, ZL09-26, which can degrade phenanthrene and produce biosurfactants. Subsequently, raw VR was dried under different temperatures (50 °C, 80 °C, 100 °C and 120 °C) or pyrolyzed under 350 °C and 700 °C, respectively. After being characterized by various approaches, the treated VR were mixed with ZL09-26 as carriers to degrade phenanthrene. We found that VR dried at 50 °C (VR50) was the best in promoting the growth of ZL09-26 and the degradation of phenanthrene. This result may be attributed to the residual nutrients, suitable porosity and small surface charge of VR50. Our results demonstrate the potential of VR in the biodegradation of phenanthrene, which may be meaningful for developing new VR-based approaches to remove PAHs in aqueous environments.

The oxidative degradation of Caffeine in UV/Fe(II)/persulfate system-Reaction kinetics and decay pathways

In this study, the degradation of caffeine was investigated by UV/Fe²⁺ /persulfate (PS) process. Caffeine (CAF) degradation in sole-UV, UV/Fe²⁺ , UV/PS, and Fe²⁺ /PS systems was also conducted to examine the contribution of isolated processes to CAF degradation. The effects of pH levels, the concentration of Fe²⁺ and PS, inorganic anions, and initial concentration of CAF on the performance of UV/Fe²⁺ /PS process were evaluated. Radical competitive reactions indicated both hydroxyl radicals and sulfate radicals played important roles in CAF degradation in UV/Fe²⁺ /PS system. Nine intermediates, among which three were detected for the first time, were identified by ultra-performance liquid chromatography/electrospray-time-of-flight mass spectrometry (UPLC/ESI-TOF-MS) and SPME (solid-phase microextraction)/GC/MS. The possible degradation pathways of CAF were proposed, among which demethylation, hydroxylation, the oxidation of olefinic double bond, and the cleavage of pyrimidine ring and imidazole ring were involved in the degradation of CAF in UV/Fe²⁺ /PS system. PRACTITIONER POINTS: Caffeine degradation by UV/Fe²⁺ /PS process was investigated. Caffeine degradation did not follow a simple pseudo-first order kinetics Chloride ions promoted CAF degradation. The anions NO₃ ^- , SO₄ ^2- , and H₂ PO₄ ^- exerted a negative influence on caffeine degradation. Nine intermediates were detected, and decay pathways were proposed.

Preparation of porous silicate supported micro-nano zero-valent iron from copper slag and used as persulfate activator for removing organic contaminants

Porous silicate supported micro-nano zero-valent iron (PSi@ZVI) was prepared from copper slag (CS) through carbothermal reduction technology, and used as a persulfate (PS) activator for removing organic contaminants. Results showed that the properties of the activator were greatly affected by the preparation conditions. Calcination for 20 min at 1100 °C with 20% anthracite was considered the optimum preparation condition for degradation of orange G (OG). The removal rate of OG was improved by increasing the dosages of PSi@ZVI or PS and raising the reaction temperature. Moreover, PSi@ZVI exhibited excellent PS activator ability in a wide range of initial pH, good degradation capability for eosin Y, methyl orange, acid fuchsine, and methylene blue. The reusability and safety of PSi@ZVI were verified. Electron paramagnetic resonance and radical quenching tests indicated that sulfate radical (SO₄^-) was the main active species in the PSi@ZVI/PS system. The X-ray diffraction results indicated that a high calcination temperature (1100 °C) was beneficial to the reduction of iron-bearing minerals to ZVI. Scanning electron microscopy and energy-dispersive spectroscopy results revealed that the formation of porous structure of PSi@ZVI and the generation of nano to micro-sized ZVI particles on the surface of the silicate holes. The X-ray photoelectron spectra showed that ZVI was first convert into Fe(II), which mainly activated PS and generated Fe(III) in the PSi@ZVI/PS system. Furthermore, the intermediates of OG were detected using gas chromatography-mass spectrometry, and the possible degradation pathway of OG was proposed. This study provides a novel approach for reuse of CS as a heterogeneous activator to effectively activate PS.

Insights into catalytic activation of peroxymonosulfate for carbamazepine degradation by MnO2 nanoparticles in-situ anchored titanate nanotubes: Mechanism, ecotoxicity and DFT study

Developing efficient pharmaceuticals and personal care products (PPCPs) degradation technologies is of scientifical and practical importance to restrain their discharge into natural water environment. This study fabricated and applied a composite material of amorphous MnO₂ nanoparticles in-situ anchored titanate nanotubes (AMnTi) to activate peroxymonosulfate (PMS) for efficient degradation and mineralization of carbamazepine (CBZ). The degradation pathway and toxicity evolution of CBZ during elimination were deeply evaluated through produced intermediates identification and theoretical calculations. AMnTi with a composition of (0.3MnO₂)•(Na_1.22H_0.78Ti₃O₇) offered high activation efficiency of PMS, which exhibited 21- and 3-times degradation rate of CBZ compared with the pristine TNTs and MnO₂, respectively. The high catalytic activity can be attributed to its unique structure, leading to a lattice shrinkage and small pores to confine the PMS molecule onto the interface. Therefore, efficient charge transfer and catalytic activation through MnOTi linkage occurred, and a MnTi cycle mediating catalytic PMS activation was found. Both hydroxyl and sulfate radicals played key roles in CBZ degradation. Theoretical calculations, i.e., density functional theory (DFT) and computational toxicity calculations, combined with intermediates identification revealed that CBZ degradation pathway was hydroxyl addition and NC cleavage. CBZ degradation in this system was also a toxicity-attenuation process.