Fluorescence detection of Escherichia coli on mannose modified ZnTe quantum dots

Photo-induced time-dependent controllable wettability of dual-responsive multi-functional electrospun MXene/polymer fibers

Switchable wettability potential in smart fibers is of paramount importance in various applications. Light-induced controllable changes in surface wettability have a significant role in this area. Herein, smart waterborne homopolymer, functional copolymer with different polarity and flexibility, and multi-functional terpolymer particles containing a time-dependent dual-responsive acrylated spiropyran, as a polymerizable monomer, were successfully synthesized through eco-friendly single-step emulsifier-free emulsion polymerization. Presence of 10 wt% of butyl acrylate and dimethylaminoethyl methacrylate relative to methylmethacrylate as functional comonomers decreased the Tg of the samples almost 20 ℃ and increased their polarity. The optical properties of the particles were investigated, and the UV-vis and fluorescence spectroscopy results showed that not only polarity and flexibility of the polymer chains may have a positive effect on improving the optical properties, but also the simultaneous presence of functional groups has a synergistic effect. The smart polymer particles with flexibility and polarity features exhibited higher absorption and emission compared to other samples. Inspired by these findings, multi-functional smart polymer fibers were prepared using the electrospinning method. The smart multi-functional electrospun fibers containing few-layer Ti3C2 MXenes were synthesized to improve the fibers' properties and change the surface wettability due to the hydrophilic functional groups of MXene. Field-emission scanning electron microscopy images displayed the successful preparation of few-layer MXenes. Smooth and bead-free fibers with bright red fluorescence emission under UV irradiation were shown using fluorescence microscopy. The study on the surface wettability of fibers revealed that UV and visible light irradiation induced reversible time-dependent changes in the wettability of the smart multi-functional MXene/polymer electrospun fibers from hydrophobic to hydrophilic, reaching a water contact angle of 10° from an initial water contact angle of 100° under UV light and also changing to superhydrophilic state with passing time. Upon visible light exposure, the fibers returned to their original state. Furthermore, the fibers demonstrated a high stability over five alternating cycles of UV and visible light irradiation. This study shows that the fabrication of time-dependent smart fibers, utilizing the flexibility and polarity in the presence of MXenes, significantly improves and controls surface wettability changes. The outstanding dynamically photo-switchable wettability of these fibers may offer exciting opportunities in various applications, especially in the separation of oil from water contaminants.

A fluorescent sensor for rapid and quantitative aquatic bacteria detection based on bacterial reactive oxygen species using Ag@carbon dots composites

A novel fluorescent sensor based on silver nanoparticle-carbon dot composites (Ag@CDs) has been developed for the rapid and quantitative detection of aquatic bacteria. The sensor operates on the principle of plasmon-enhanced resonance energy transfer, where the fluorescence of CDs is quenched by Ag nanoparticles and restored upon bacterial interaction due to the generation of reactive oxygen species. The Ag@CDs exhibit a linear response to bacterial concentration over the range 7 × 104 ~ 4 × 107 CFU·mL-1, with a low detection limit of 4 × 104 CFU·mL-1. The fluorescence recovery is rapid, reaching maximum intensity within 5 min. The method demonstrates high selectivity, with minimal interference from common ions and compounds found in municipal and industrial wastewater. The Ag@CDs-based 96-well plate assay for quantitative measurement of bacteria was developed. The assay's performance was further validated through the analysis of real water samples, showing a recovery of 94.0 ~ 102% for domestic wastewater and 97.6 ~ 106% for industrial wastewater. Also, Ag@CDs-based test strips assay for semi-quantitation were developed for rapid in-field aquatic bacteria detection. Ag@CDs can be conveniently integrated into 96-well plates and test strips, providing rapid on-site aquatic bacteria testing.

Coordination-driven in-situ controlled synthesis of cellulose-based fluorescent composite with tunable color for decoration, anti-counterfeiting, and accurate color recognition

Fluorescent composites have widespread applications in many aspects. Wood-derived cellulose is a renewable, easily processed and biodegradable, and cellulose-based fluorescent composites are highly favored for in different fields. However, the existing cellulose-based fluorescent composites still have many urgent problems to be solved, such as unstable luminescence properties and easy shedding of luminescent substances, and the development of their practical applications is still a formidable challenge. Herein, a green and mild strategy for the in-situ controllable synthesis of cellulose-based fluorescent composites membrane (CFM) was developed. Firstly, delignified wood (DW) was modified with citric acid, and then lanthanide ions were introduced on modified DW through coordinated covalent bonds. Additionally, the luminescence mechanism of CFM is proposed. CFMs show adjustable color for decorative and light conversion and can be accurately identified for data protection, which increases the high value-added of cellulose-based composites. The stable luminescent properties were maintained after sonication for 30 min or solvent immersion for three months. Therefore, this work presents a new approach for the synthesis of CFM, which provides an environment-friendly strategy for manufacturing cellulose-based fluorescent materials, which is significant for the subsequent development of environment-friendly composites for anti-counterfeiting and decorative applications.

Yolk-shell composite optical sensors with chiral L-histidine/Rhodamine 6G for high-sensitivity "turn-on" detection of L-proline

Chirality is a ubiquitous phenomenon in nature and has attracted wide attention in the biomedicine, pharmaceutics and biosensing research fields. Enantiomeric recognition of chiral compounds, especially chiral drugs and chiral amino acids, is important for human health and nutrition. In this work, through the encapsulation of L-His&R6G (L-His = L-Histidine; R6G = Rhodamine 6G) into MOF@MOF framework ZIF-67@ZIF-8, composited material L-His&R6G@ZIF-67@ZIF-8 can be obtained. Additionally, through the etching process, a unique yolk-shell ZIF-8 chiral composite optical sensors L-His&R6G@ZIF-8 (1) can be successfully prepared. Photo-luminescent (PL) experiment also reveals that 1 can highly sensitively detect L-Proline (L-Pro) through the "turn-on" detection strategy (KBH = 1.22 × 104 M-1 and detection limit 1.9 μM). Further yolk-shell L-His&R6G@ZIF-8-based fabricate flexible mixed-matrix membranes has been prepared using doctor-blading technique, which show significant fluorescence enhancement effect under ultraviolet lamp. This work also provides the unique example of preparing chiral yolk-shell framework composite sensors, which have broad application in chiral sensing area.

Novel MOF(Zr)-on-MOF(Ce) adsorbent for elimination of excess fluoride from aqueous solution

Herein, we used a one-pot method to fabricate a novel MOF-on-MOF adsorbent, namely MOF(Zr)-on-MOF(Ce). The adsorbent demonstrated a high maximum fluoride-ions capture capacity of 164.47 mg g-1. The morphology, elemental distribution, pore size distribution, and thermal stability were studied using SEM-EDS, XRD, BET, and TGA. The influence of the temperature, solution pH, fluoride concentration, and coexisting ions was explored using intermittent experiments. The results suggested that MOF(Zr)-on-MOF(Ce) had a fast capture rate for fluoride. MOF(Zr)-on-MOF(Ce) maintained an excellent fluoride removal performance over a wide pH range with an initial fluoride concentration of 20 mg L-1. The optimal effect was obtained at a pH of 4, but a high removal efficiency of 94% was maintained even at a pH of 9. Interference experiments showed that only the PO43- had an adverse inhibition influence. The field experiments demonstrated that MOF(Zr)-on-MOF(Ce) can keep the safety threshold levels of fluoride in drinking water. The Langmuir and pseudo-second order kinetic models were well fitted for the defluoridation process, demonstrating that the adsorption of fluoride ions on MOF(Zr)-on-MOF(Ce) was dominated by monolayer chemisorption. With the further characterization and kinetic thermodynamic studies indicates that the removal mechanism involves ion exchange, electrostatic interactions and complexation effect.

A Strong, Tough and Fire-Retardant Biomimetic Multifunctional Wooden Laminate

Mildly delignified wood showed a well-preserved wood cell wall framework, and its derived compressed materials demonstrate excellent mechanical properties and advanced functional material potential. Here, we proposed a simple yet effective approach for making strong, tough, and fire-retardant wooden laminate by a three-step process of mild delignification, infiltrating potassium nonafluoro-1-butanesulfonate (PFBS), and hot-pressing to densify the material. PFBS can be infiltrated into the micro/nano-structures of the mildly delignified wood to achieve a good flame-resistant protective barrier. Flame retardant tests showed that this strong, tough, and fire-retardant wooden laminate has a superior flame-retardant performance to natural wood. Additionally, the wooden laminate also exhibits a simultaneously enhanced tensile strength (175.6 MPa vs. 89.9 MPa for natural wood) and toughness (22.9 MJ m-3vs. 10.9 MJ m-3 for natural wood). Given these attributes, the resulting wooden laminates are identified as promising candidates for high-performance structural applications, fulfilling stringent requirements for both mechanical resilience and flame-retardant efficacy.

A quantitative sensing system based on a 3D-printed ion-selective electrode for rapid and sensitive detection of bacteria in biological fluid

Bacterial infections, such as urinary tract infections, are crucial health problems. Here, we report a new potentiometric sensor to detect bacteria sensitively, accurately, and quickly. First, a customizable, 3D printed Ag⁺ selective electrode was fabricated as the probe. Our 3D printed electrode showed sensitive, linear, and selective responses to Ag⁺. Compared to commercial Ag⁺ selective electrodes, ours required less sample volume, shorter responding time, and lower costs. Next, a novel potentiometer was developed with Arduino to couple the electrode for data transducing and transferring, which was programmed to transfer results to cell phones wirelessly. Moreover, a filter was designed to quickly remove interfering species in a biofluid sample (e.g., Cl^-). By detecting the lost Ag⁺ taken by bacteria, the bacterial number could be elucidated. With this sensor system, bacteria numbers could be detected as low as 80 CFU/mL (LOD) within 15 min, which is sufficient for many diagnoses (e.g., urinary tract infection >1000 CFU/mL). An amplification method was presented for single-digit bacteria detection. Overall, we are presenting a bacteria detector with three innovative components: the electrode (signal transduction and detection), the potentiometer (transducer and data processing), and the 3D printed filter (sample preparation), which showed robust and improved (than previously reported ones) analytical merits. The low-cost and customizable (the electrode and the open-source coding) nature enhances the transnationality of the system, especially in underdeveloped areas.

Aggregation-Induced Emission-Based Platforms for the Treatment of Bacteria, Fungi, and Viruses

The prevention and control of pathogenic bacteria, fungi, and viruses is a herculean task for all the countries since they greatly threaten global public health. Rapid detection and effective elimination of these pathogens is crucial for the treatment of related diseases. It is urgently demanded to develop new diagnostic and therapeutic strategies to combat bacteria, fungi, and viruses-induced infections. The emergence of aggregation-induced emission (AIE) luminogens (AIEgens) is a revolutionary breakthrough for the treatment of many diseases, including pathogenic infections. In this review, the main focus is on the applications of AIEgens for theranostic treatment of pathogenic bacteria, fungi, and viruses. Due to the AIE characteristic, AIEgens are promising fluorescent probes for the detection of bacteria, fungi, and viruses with excellent sensitivity and photostability. Moreover, AIEgen-based theranostic platforms can be fabricated by introducing bactericidal moieties or designing AIE photosensitizers and AIE photothermal agents. The current strategies and ongoing developments of AIEgens for the treatment of pathogenic bacteria, fungi, and viruses will be discussed in detail.

Nanomaterials in the Management of Gram-Negative Bacterial Infections

The exploration of multiplexed bacterial virulence factors is a major problem in the early stages of Escherichia coli infection therapy. Traditional methods for detecting Escherichia coli (E. coli), such as serological experiments, immunoassays, polymerase chain reaction, and isothermal microcalorimetry have some drawbacks. As a result, detecting E. coli in a timely, cost-effective, and sensitive manner is critical for various areas of human safety and health. Intelligent devices based on nanotechnology are paving the way for fast and early detection of E. coli at the point of care. Due to their specific optical, magnetic, and electrical capabilities, nanostructures can play an important role in bacterial sensors. Another one of the applications involved use of nanomaterials in fighting microbial infections, including E. coli mediated infections. Various types of nanomaterials, either used directly as an antibacterial agent such as metallic nanoparticles (NPs) (silver, gold, zinc, etc.), or as a nanocarrier to deliver and target the antibiotic to the E. coli and its infected area. Among different types, polymeric NPs, lipidic nanocarriers, metallic nanocarriers, nanomicelles, nanoemulsion/ nanosuspension, dendrimers, graphene, etc. proved to be effective vehicles to deliver the drug in a controlled fashion at the targeted site with lower off-site drug leakage and side effects.

3D-printed smartphone-based device for fluorimetric diagnosis of ketosis by acetone-responsive dye marker and red emissive carbon dots

A portable smartphone device is reported that uses 3D printing technology for the primary diagnosis of diseases by detecting acetone. The key part of the device consists of red carbon dots (RCDs), which are used as internal standards, and a sensing reagent (3-N,N-(diacethydrazide)-9-ethylcarbazole (2-HCA)) for acetone. With an excitation wavelength of 360 nm, the emission wavelengths of 2-HCA and RCDs are 443 nm and 619 nm, respectively. 2-HCA effectively captures acetone to form a nonfluorescent acylhydrazone via a condensation reaction occurring in aqueous solution, resulting in obvious color changes from blue-violet to dark red. The detection limit for acetone is 2.62 μM (~ 0.24 ppm). This is far lower than the ketone content in normal human blood (≤ 0.50 mM) and the acetone content in human respiratory gas (≤ 1.80 ppm). The device has good recovery rates for acetone detection in blood and exhaled breath, which are 90.56-109.98% (RSD ≤ 5.48) and 92.80-108.00% (RSD ≤ 5.07), respectively. The method designed here provides a reliable way to provide health warnings by visually detecting markers of ketosis/diabetes in blood or exhaled breath. The portable smart phone device visually detects ketosis/diabetes markers in the blood or exhaled breath through the nucleophilic addition reaction, which effectively captures acetone to form nonfluorescent acyl groups. This will be a reliable tool to warn human health.

Construction and theoretical insights into the ESIPT fluorescent probe for imaging formaldehyde in vitro and in vivo

We report the first ESIPT-based probe ABTB, for the highly sensitive and selective imaging of formaldehyde (FA). The various theoretical calculations have been systematically performed, and clearly unravel the lighting mechanism of the fluorescent probe for FA. Additionally, the probe was successfully applied in monitoring endogenous FA in the brain of AD mice.

Multitherapy magnetic theranostic: Synthesis, characterization and in vitro evaluation of their performance

It is well known that iron oxide magnetic nanoparticles (IONPs) have many potential utilities in biomedicine due to their unique physicochemical properties. With the aim to obtain multifunctional nanoparticles with potential uses for therapy and diagnosis (nanotheranostics), IONPs were synthesized by hydrothermal synthesis assisted by mannose. Two synthetic pathways were evaluated in order to obtain IONPs with suitable properties for biomedical applications. The formulation Mag@Man/H1 presented the best characteristics in terms of size and stability. Mag@Man/H1 was evaluated as: a) drug carrier, b) antioxidant activity, c) magnetic hyperthermia, d) contrast agent for MRI. To evaluate the point a), morin, a natural flavonoid with several pharmaceutical activities, was loaded on the nanoparticles. A high percentage of drug loading was achieved. In point b) it was determined that the carrier itself possess a high activity which increased in morin loaded nanoparticles. Point c) magnetocalorimetric evaluation were carried out at several field conditions. A specific absorption rate value of 121.4 W/gFe was achieved at 52.4 kA/m and 260 kHz and 8.8 W/gFe at 4 kA/m and 100 kHz. Regarding contrast capacity (point d), the r1 value found was close to some contrast agent based on manganese. Although the measured r2 value was quite smaller than other iron oxides, the achieved effect was strong enough to produce negative contrast. From these studies, it was concluded that Mag@Man/H1 could act as a multifunctional nanoplatform for oncological diseases treatments.

Recent Developments of Carbon Dots in Biosensing: A Review

Early diagnosis of diseases is of great importance because it increases the chance of a cure and significantly reduces treatment costs. Thus, development of rapid, sensitive, and reliable biosensing techniques is essential for the benefits of human life and health. As such, various nanomaterials have been explored to improve performance of biosensors, among which, carbon dots (CDs) have received enormous attention due to their excellent performance. In this Review, the recent advancements of CD-based biosensors have been carefully summarized. First, biosensors are classified according to their sensing strategies, and the role of CDs in these sensors is elaborated in detail. Next, several typical CD-based biosensors (including CD-only, enzymatic, antigen-antibody, and nucleic acid biosensors) and their applications are fully discussed. Last, advantages, challenges, and perspectives on the future trends of CD-based biosensors are highlighted.

Anti-vascular nano agents: a promising approach for cancer treatment

Anti-vascular agents (AVAs) are a class of promising therapeutic agents with tumor vasculature targeting properties, which can be divided into two types: anti-angiogenic agents (AAAs, inhibit angiogenesis factors) and vascular disrupting agents (VDAs, disrupt established tumor vasculature). AVAs exhibit an enhanced anti-cancer effect by cutting off the oxygen and nutrition supplement channels of tumors. However, the intrinsic drawbacks, such as poor hydrophilicity, undesirable membrane permeability and inferior tumor targeting ability, discount their anti-vascular efficacy. Fortunately, the development of nanotechnology has brought an opportunity for efficient delivery of AVAs to tumour sites with great therapeutic efficacy. The works summarized in this review will provide an understanding of recent advances of anti-vascular nano agents (AVNAs) with a goal to define the mechanism of anti-vascular-based cancer therapy and discuss the challenges and opportunities of AVNAs for clinical translation.

Separation of subcellular fluorescent microspheres by capillary electrophoresis

Fluorescent microspheres (FMs) are widely employed in diagnostics and life sciences research; here, we investigated the effect of capillary coating, polymer concentration, electric field strength, and sample concentration on the separation performance of 1.0 μm FMs in hydroxyethyl cellulose (HEC) by capillary electrophoresis (CE). Results showed that (1) capillary coating could enhance the fluorescence signal. (2) For HEC with the same molecular weight, the higher HEC concentration is, the later the first peak appears in the electropherogram. (3) When FMs are diluted, increasing the electric field strength can enhance the migration speed and reduce the aggregation of FMs. (4) The number of FMs calculated is close to the theoretical value when it is diluted 10,000 times. The optimum conditions for CE were as follows: 6 cm/8 cm of effective length and total length of the coated capillary, 0.3% HEC (1300 k), and 300 V/cm of electric field strength. Such a study is helpful for the development of a FM counting system. Graphical abstract.

Highly rapid and non-enzymatic detection of cholesterol based on carbon nitride quantum dots as fluorescent nanoprobes

In this work, we reported a highly rapid and non-enzymatic method for cholesterol measuring based on carbon nitride quantum dots (CNQDs) as fluorescent nanoprobes, which were synthesized through chemical oxidation. The obtained CNQDs displayed high quantum yield up to 35% as well as excellent photostability, water solubility and low toxicity. We found that the fluorescence of CNQDs could be quenched more than 90% within 30 seconds by cholesterol through the formation of hydrogen bonds between –NH₂, –NH on the surface of CNQDs and cholesterol containing –OH. According to this phenomenon, a cholesterol detection method was constructed with a wide linear region over the range of 0–500 μmol L⁻¹ and a detection limit as low as 10.93 μmol L⁻¹, and it possessed the obvious advantages of being a very rapid process and avoiding the use of enzymes. In addition, this method showed high selectivity in the presence of various interfering reagents and applicability to the measurement of cholesterol in fetal bovine serum, which indicated its potential application value in clinical settings.

Highly rapid and non-enzymatic method for the detection of cholesterol was constructed based on carbon nitride quantum dots (CNQDs) as fluorescent nanoprobes. The fluorescence of CNQDs could be effectively and rapidly quenched by cholesterol.