A review of linear carbon chains

Encapsulation and Evolution of Polyynes Inside Single-Walled Carbon Nanotubes

Polyyne is an sp-hybridized linear carbon chain (LCC) with alternating single and triple carbon-carbon bonds. Polyyne is very reactive; thus, its structure can be easily damaged through a cross-linking reaction between the molecules. The longer the polyyne is, the more unstable it becomes. Therefore, it is difficult to directly synthesize long polyynes in a solvent. The encapsulation of polyynes inside carbon nanotubes not only stabilizes the molecules to avoid cross-linking reactions, but also allows a restriction reaction to occur solely at the ends of the polyynes, resulting in long LCCs. Here, by controlling the diameter of single-walled carbon nanotubes (SWCNTs), polyynes were filled with high yield below room temperature. Subsequent annealing of the filled samples promoted the reaction between the polyynes, leading to the formation of long LCCs. More importantly, single chiral (6,5) SWCNTs with high purity were used for the successful encapsulation of polyynes for the first time, and LCCs were synthesized by coalescing the polyynes in the (6,5) SWCNTs. This method holds promise for further exploration of the synthesis of property-tailored LCCs through encapsulation inside different chiral SWCNTs.

Bending a Cumulene with Electrons: Stepwise Chemical Reduction and Structural Study of a Tetraaryl[4]Cumulene

Chemical reduction of a [4]cumulene with cesium metal was explored, and the structural changes stemming from electron acquisition are detailed using X-ray crystallography. It is found that the [4]cumulene undergoes dramatic geometric changes upon stepwise reduction, including bending of the cumulenic core and twisting of the endgroups from orthogonal to planar. The structural deformation is consistent with early theoretical reports that suggest that the twisting should occur upon reduction of both even and odd [n]cumulenes. The current results, on the other hand, are inconsistent with a previous experimental study of a [3]cumulene in which the predicted twisting is not observed upon reduction. DFT calculations reveal that the barrier to deformation is an order of magnitude lower in a [3]cumulene than a [4]cumulene, allowing the barrier to be overcome in the solid-state.

Polarization-Sensitive Photoluminescence from Aligned Carbon Chains Terminated by Gold Clusters

We synthesize a thin film composed of long carbyne chains terminated by gold clusters and study its optical properties. The presence of gold particles stabilizes longer chains and leads to their alignment. We show that the gold clusters also act as a source of electron doping, thus, changing the intensity of photoluminescence from quadratic dependence on the pumping intensity without gold to linear with gold. We also observe that the excitation of the film at the gold plasmon frequency causes the blue shift of photoluminescence and estimate, on the basis of this effect, the minimum length of the carbyne chains. The high degree of alignment of the gold-terminated carbyne chains results in strongly anisotropic light absorption characterized by a distinctive cosine dependence on the angle between the carbyne molecule and polarization plane of the excitation. This paves the way for a new class of ultimately thin polarization sensitive emitters to be used in future integrated quantum photonics devices.

Disclosing Early Excited State Relaxation Events in Prototypical Linear Carbon Chains

One-dimensional (1D) linear nanostructures comprising sp-hybridized carbon atoms, as derivatives of the prototypical allotrope known as carbyne, are predicted to possess outstanding mechanical, thermal, and electronic properties. Despite recent advances in their synthesis, their chemical and physical properties are still poorly understood. Here, we investigate the photophysics of a prototypical polyyne (i.e., 1D chain with alternating single and triple carbon bonds) as the simplest model of finite carbon wire and as a prototype of sp-carbon-based chains. We perform transient absorption experiments with high temporal resolution (<30 fs) on monodispersed hydrogen-capped hexayne H─(C≡C)6─H synthesized by laser ablation in liquid. With the support of computational studies based on ground state density functional theory (DFT) and excited state time-dependent (TD)-DFT calculations, we provide a comprehensive description of the excited state relaxation processes at early times following photoexcitation. We show that the internal conversion from a bright high-energy singlet excited state to a low-lying singlet dark state is ultrafast and takes place with a 200 fs time constant, followed by thermalization on the picosecond time scale and decay of the low-energy singlet state with hundreds of picoseconds time constant. We also show that the time scale of these processes does not depend on the end groups capping the sp-carbon chain. The understanding of the primary photoinduced events in polyynes is of key importance both for fundamental knowledge and for potential optoelectronic and light-harvesting applications of low-dimensional nanostructured carbon-based materials.

Nano-Hybrid Ag@LCCs Systems with Potential Wound-Healing Properties

The synthesis of contaminant-free silver@linear carbon chains (Ag@LCCs) nanohybrid systems, at different Ag/LCCs ratios, by pulsed laser ablation was studied. The ablation products were first characterized by several diagnostic techniques: conventional UV-Vis optical absorption and micro-Raman spectroscopies, as well as scanning electron microscopy, operating in transmission mode. The experimental evidence was confirmed by the theoretical simulations' data. Furthermore, to gain a deeper insight into the factors influencing metal@LCCs biological responses in relation to their physical properties, in this work, we investigated the bioproperties of the Ag@LCCs nanosystems towards a wound-healing activity. We found that Ag@LCC nanohybrids maintain good antibacterial properties and possess a better capability, in comparison with Ag NPs, of interacting with mammalian cells, allowing us to hypothesize that mainly the Ag@LCCs 3:1 might be suitable for topical application in wound healing, independent of (or in addition to) the antibacterial effect.

Ab initio study revealing remarkable oscillatory effects and negative differential resistance in the molecular device of silicon carbide chains

Inspired by the requirements of miniaturization and multifunction of molecular devices, we investigate the quantum transport properties of three unique molecular devices with silicon carbide chains bridging gold electrodes by an ab initio approach. The pronounced quantum effects, including the oscillation of charge, conductance, and current, together with the negative differential resistance (NDR), have been observed simultaneously over a wide region in the double-chain device. It changes the regular situation that these two effects usually emerge in single-chain systems at the same time. Inspections of the visible differences in the transport behaviors relevant to length and bias between the three devices further evidence that the interchain interaction and molecule-electrode coupling are decisive factors for achieving the quantum effects of oscillation and NDR. These two factors can improve electronic transport capability through enhancing transmission, strengthening the delocalization of frontier molecular orbitals, and reducing potential barriers. Our results not only lay a solid foundation for the application of silicon carbide chains in the miniaturized and multifunctional molecular devices with good performance, but also provide an efficient way to the continuing search for materials with multiple controllable quantum effects in nanoelectronics.

Advances in Polyynes to Model Carbyne

The formation and study of molecules that model the sp-hybridized carbon allotrope, carbyne, is a challenging field of synthetic physical organic chemistry. The target molecules, oligo- and polyynes, are often the preferred candidates as models for carbyne because they can be formed with monodisperse lengths as well as defined structures. Despite a simple linear structure, the synthesis of polyynes is often far from straightforward, due in large part to a highly conjugated framework that can render both precursors and products highly reactive, i.e., kinetically unstable. The vast majority of polyynes are formed as symmetrical products from terminal alkynes as precursors via an oxidative, acetylenic homocoupling reaction based on the Glaser, Eglinton-Galbraith, and Hay reactions. These reactions are very efficient for the synthesis of shorter polyynes (e.g., hexaynes and octaynes), but yields often drop dramatically as a function of length for longer derivatives, usually starting with the formation of decaynes. The most effective approach to circumvent unstable precursors and products has been through the incorporation of sterically demanding end groups that serve to "protect" the polyyne skeleton. This approach was arguably identified in the early 1950s by Bohlmann and co-workers with the synthesis of tBu-end-capped polyynes. During the next 50 years, a polyyne with 14 contiguous alkyne units remained the longest isolated derivative until 2010, when the record was extended to 22 alkyne units. The record length was broken again in 2020, when a polyyne consisting of 24 alkynes was isolated and characterized. Beyond polyynes, there have been several reports describing the potential synthesis of carbyne, but conclusive characterization and proof of structure have been tenuous. The sole example of synthetic carbyne arises from synthesis within carbon nanotubes, when chains of thousands of sp carbon atoms have been linked to form polydisperse samples of carbyne. Thus, model compounds for carbyne, the polyynes, remain the best means to examine and predict the experimental structure and properties of this carbon allotrope.This Account will discuss the general synthesis of polyynes using homologous series of polyynes with up to 10 alkyne units as examples (decaynes). The limited number of specific syntheses of series with longer polyynes will then be presented and discussed in more detail based on end groups. The monodisperse polyynes produced from these synthetic efforts are then examined toward providing our best extrapolations for the expected characteristics for carbyne based on ¹³C NMR spectroscopy, UV-vis spectroscopy, X-ray crystallography, and Raman spectroscopy.

Carbon nanowires under compression and their vibrational anomalies

Anomalous pressure dependence of Raman frequencies of carbon nanowires encapsulated in carbon nanotubes has been recently reported. Two hypotheses have been proposed to explain this phenomenon in linear carbon chains: softening of a carbon bond with pressure or charge transfer to the chain. However, carbon chains bend easily under stress, although stable structures under these conditions have yet to be discovered. In this study, we model linear and bent carbon nanowires under compression, including both stable and metastable structures. The structures, electronic properties, and vibrational frequencies are obtained through first-principles calculations within density functional theory. We find that polyyne, the dimerized linear ground-state structure of carbon chains at zero strain, is not stable under compression for an infinite carbon chain. Instead, the chain transforms into two possible configurations, a previously unknown three-dimensional helical shape or a two-dimensional sinusoidal shape. These structures can be modeled using an analytical atomistic force-constant model or with a continuum approach. In the continuum approach, an eigenvalue wave equation describes the energy and geometry of the chain. Moreover, this equation produces excited (metastable) structural states and can be applied to other one-dimensional systems. The wave equation formulation indicates that the much-pursued concept of Young's modulus in one-dimensional chains is ill-defined. Finally, the Raman anomaly under compression is not observed within the atomistic force-constant model contrary to assumptions in the literature. Instead, this anomaly can be understood using a model in which charge transfer between the nanotube and the nanowire occurs upon contact.

Tailoring Vibrational Signature and Functionality of 2D-Ordered Linear-Chain Carbon-Based Nanocarriers for Predictive Performance Enhancement of High-End Energetic Materials

A recently proposed, game-changing transformative energetics concept based on predictive synthesis and preprocessing at the nanoscale is considered as a pathway towards the development of the next generation of high-end nanoenergetic materials for future multimode solid propulsion systems and deep-space-capable small satellites. As a new door for the further performance enhancement of transformative energetic materials, we propose the predictive ion-assisted pulse-plasma-driven assembling of the various carbon-based allotropes, used as catalytic nanoadditives, by the 2D-ordered linear-chained carbon-based multicavity nanomatrices serving as functionalizing nanocarriers of multiple heteroatom clusters. The vacant functional nanocavities of the nanomatrices available for heteroatom doping, including various catalytic nanoagents, promote heat transfer enhancement within the reaction zones. We propose the innovative concept of fine-tuning the vibrational signatures, functionalities and nanoarchitectures of the mentioned nanocarriers by using the surface acoustic waves-assisted micro/nanomanipulation by the pulse-plasma growth zone combined with the data-driven carbon nanomaterials genome approach, which is a deep materials informatics-based toolkit belonging to the fourth scientific paradigm. For the predictive manipulation by the micro- and mesoscale, and the spatial distribution of the induction and energy release domains in the reaction zones, we propose the activation of the functionalizing nanocarriers, assembled by the heteroatom clusters, through the earlier proposed plasma-acoustic coupling-based technique, as well as by the Teslaphoresis force field, thus inducing the directed self-assembly of the mentioned nanocarbon-based additives and nanocarriers.

On the Stabilization of Carbynes Encapsulated in Penta-Graphene Nanotubes: a DFT Study

We carried out density functional theory calculations to investigate the electronic and structural properties of linear carbon chains (carbynes) encapsulated in armchair and zigzag penta-graphene (PGNT) nanotubes. Results showed that PGNTs-wrapped carbyne can present negative formation energies that tend to stabilize that encapsulated carbon chains. These chains were stabilized in their cumulene and polyyne forms, with slight dependence on tube diameter. As a general trend, the PGNT band structures are kept almost unchanged upon carbyne encapsulation. This finding indicates weak orbital interactions between the PGNT and the carbyne. No net charge was found in chains encapsulated on zigzag PGNTs. Schematic representation of a carbyne encapsulated in a pentagraphene nanotube.

Predicted Confinement-Enhanced Stability and Extraordinary Mechanical Properties for Carbon Nanotube Wrapped Chains of Linear Carbon

The demand for high-modulus, high-strength, lightweight materials has continuously driven the bottom-up assembly of carbon nanostructures into high-performance bulk carbon materials, such as graphene sheets and carbon nanotube yarns. Carbyne, often called linear carbon, has a higher predicted gravimetric modulus and gravimetric strength than any other form of carbon, but possibly reacts under near-ambient conditions because of the extended sp¹ hybridization. The successful fabrication of carbon nanotube wrapped single carbyne chain (Shi et al. Nat. Mater. 2016, 15, 634) suggests the possibility of carbyne's bulk production. Herein, we designed a type of carbon assembly that includes a possibly large array of carbyne chains confined within a single-walled nanotube sheath (nanotube wrapped carbynes, NTWCs), in which carbyne chains act as reinforcing building blocks, and the carbon nanotube sheath protects the multiple carbyne chains against chemical or topochemical reaction. We showed that NTWCs exhibit confinement-enhanced stabilities, even when they contain multiple neighboring carbyne chains. We developed a mechanics model for exploring the mechanical properties of NTWCs. On the basis of this model, the gravimetric modulus (and strength) of NTWCs was predicted to increase from 356.4 (50.25) to 977.2 GPa·g^-1·cm³ (71.20 GPa·g^-1·cm³) as the mass ratio of carbyne carbons to sheath carbons increases, which is supported by atomistic simulations. The highest calculated gravimetric modulus and strength of NTWCs are 174.2% and 41.7%, respectively, higher than those of either graphene or carbon nanotubes. The corresponding highest values of engineering modulus and strength of NTWCs with a density of 1.54 g·cm^-3 are 1505 and 109.6 GPa, respectively. Hence, NTWCs are promising for uses in high-modulus, high-strength, lightweight composites.